Geology Reports⌕ Search

SEARCH · Geology Reports

Results for “Rock Products”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2Linked to original sources
USGS1974

Estimating the “thickness” of the Boulder Batholith, Montana, from heat-flow and heat-productivity data

Estimates of minimum thickness of the Boulder batholith, computed using the linear relation between heat flow and heat productivity and assuming constant heat productivity with depth, are highly nonspecific. They can vary between about 3 and 20 km, depending on values of surface-rock heat productivity and values of assumed contribution of nonbatholith heat sources (such as lower crustal and upper mantle) to the measured surface heat flow used in the calculations. Models involving radiogenic heat sources decreasing with depth in the batholith lead to significantly greater estimates of thickness by as much as a factor of two or more. A reappraisal of data and arguments related to earlier conflicting estimates, based only on one heat-flow determination and within the context of several newly published additional heat-flow measurements, indicates that the previous differences of opinion are negligible and acceptable, in view of the enormous uncertainties inherent in the method of estimation.

Geology↗
USGS1972

Reconnaissance geologic map of the Solomon D-6 quadrangle, Seward Peninsula, Alaska

The Solomon D-6 15- by 30-minute quadrangle lies 20 miles northeast of Nome, Alaska, and adjoins on the east the Nome D-l quadrangle mapped by Hummel (1962b) and on the west the Solomon D-5 quadrangle mapped by Smith (1910). Placer gold has been produced from Iron Creek and many of its tributaries, and a small amount of copper was shipped from the Wheeler mine. Many lode prospects contain small amounts of copper in silicified limestone within and near the base of thrust plates of carbonate rocks. Other lodes consist of well-defined veins containing gold and base-metal sulfide minerals, but none has been commercially productive. Mapped rock units include the "York Slate," of Precambrian age, which consists of a highly deformed and thick sequence of graphitic calcareous siltite, which contains thin limestone beds and intercalated(?) volcaniclastic rocks, and Paleozoic carbonate rocks, which have been converted largely to marble and schistose marble. Along and near the Kigluaik Mountains in the north part of the quadrangle, quartzo-feldspathic gneisses of Precambrian age are intruded by fine-grained granite. A very thick sequence of schistose thin-bedded argillaceous and dolomitic limestone overlies the York Slate and is correlative with a similar rock originally mapped in the York Mountains. Surficial deposits, consisting principally of moraine and stream-reworked moraine, mantle large parts of the quadrangle.

Alaska↗
USGS2002

Characterization of soils and rock at an active oil production site: Effects of brine and hydrocarbon contamination

An active oil production site (Osage-Skiatook petroleum environmental research Site B) in Osage County, Oklahoma is under study to determine the impacts on soils and rock of brine and hydrocarbon spills. The goals of the soil and rock characterization are to 1) document and identify the type, degree, and areal extent of brine and hydrocarbon releases, 2) understand controls on the movement and retention of brine and hydrocarbons, and 3) determine the role of solid phases, such as clay and iron-bearing minerals, in natural mitigation. The types and amounts of clay minerals and oxidizers (particularly iron) are important because of the capacity of clay minerals to exchange cations that are dissolved in brines and the capacity of reactive ferric iron species to oxidize hydrocarbons. Characterization of soils and rock includes visual and microscopic description, X-ray diffraction of bulk and clay fraction samples, separation of size fractions, determination of cation exchange capacity, bulk chemical composition, and selective extraction of iron species. Results suggest that much of the brine and hydrocarbon contamination occurs in the shallow subsurface (< 240 cm) where the soil profile varies from dark brown topsoil to reddish orange sand to greenish-gray clay. A layer of iron-stained colluvium that is present in the shallow subsurface consists of pebbles and coarse sand and forms an important conduit for fluid movement. Unusually high percentages (as much as 97 % of total iron) of reduced iron may record the passage of hydrocarbon-rich ground water. Clay minerals are abundant in some samples and are dominated by kaolinite, mixed layer illite-smectite, and smectite. The correlation of grain size and clay mineral content with soil leachate results will be discussed and high percentages of sodium on exchange sites in clay are expected in areas of past spills of produced water.

Oklahoma↗
USGS2010

Evaluation of Methods for Delineating Zones of Transport for Production Wells in Karst and Fractured-Rock Aquifers of Minnesota

Assessment of groundwater-flow conditions in the vicinity of production wells in karst and fractured-rock settings commonly is difficult due in part to the lack of detailed hydrogeologic information and the resources needed to collect it. To address this concern and to better understand the hydrogeology and aquifer properties of karst and fractured-rock aquifers in Minnesota, the U.S. Geological Survey, in cooperation with the Minnesota Department of Health, conducted a study to evaluate methods for delineating zones of transport for 24 production wells in karst and fractured-rock aquifers in Minnesota. Two empirical methods for delineating zones of transport around wells were applied to the 24 production wells that extract groundwater from karst and fractured-rock aquifers in nine Minnesota communities. These methods were the truncated-parabola and modified-ellipse methods, and both methods assume porous-media flow conditions. The 24 wells extracted water from a karst aquifer (Prairie du Chien-Jordan aquifer), porous aquifers interspersed with solution-enhanced fractures (Jordan and Hinckley aquifers), or fractured-bedrock aquifers (Biwabik Iron-Formation and Sioux Quartzite aquifers). Zones of transport delineated using these two empirical methods were compared with zones of transport previously delineated by Minnesota Department of Health hydrologists for the wells using the calculated-fixed-radius method and groundwater-flow models. Large differences were seen in the size and shapes of most zones of transport delineated using the truncated-parabola and modified-ellipse methods compared with the zones of transport delineated by the Minnesota Department of Health. In general, the zones of transport delineated using the truncated-parabola and modified-ellipse methods were smaller in area than those delineated by the Minnesota Department of Health and included only small parts of the Minnesota Department of Health zones of transport. About two-thirds(67 percent) of the individual or composite truncated parabolas and modified ellipses covered less than 50 percent of the area included in zones of transport delineated by the Minnesota Department of Health. The shapes of some of the truncated parabola and modified ellipses did not closely match the zones of transport delineated by the Minnesota Department of Health using the calculated-fixed-radius method and groundwater-flow models. Differences between the zones of transport delineated by the truncated-parabola and modified-ellipse methods and those delineated by the Minnesota Department of Health can be explained by variations inherent to the methods and by the amount of complexity taken into account by different groundwater-flow models. Additional field hydrogeologic studies would be needed at specific sites to support the use of these zone-of-transport delineation methods. Application of the truncated-parabola and modified-ellipse methods to sites for which existing hydrogeologic information is limited can produce questionable results in karst and fractured-rock settings, particularly in areas where many high-capacity wells or active mining operations are nearby.

Scientific Investigations Report↗
USGS2015

Profiles of reservoir properties of oil-bearing plays for selected petroleum provinces in the United States

Profiles of reservoir properties of oil-bearing plays for selected petroleum provinces in the United States were developed to characterize the database to be used for a potential assessment by the U.S. Geological Survey (USGS) of oil that would be technically recoverable by the application of enhanced oil recovery methods using injection of carbon dioxide (CO 2 -EOR). The USGS assessment methodology may require reservoir-level data for the purposes of screening conventional oil reservoirs and projecting CO 2 -EOR performance in terms of the incremental recoverable oil. The information used in this report is based on reservoir properties from the &ldquo;Significant Oil and Gas Fields of the United States Database&rdquo; prepared by Nehring Associates, Inc. (2012). As described by Nehring Associates, Inc., the database &ldquo;covers all producing provinces (basins) in the United States except the Appalachian Basin and the Cincinnati Arch.&rdquo; Under contract to the USGS, INTEK, Inc., developed and applied algorithms to estimate variables useful in projecting EOR performance at the reservoir level and to complete some partial reservoir records of the &ldquo;Significant Oil and Gas Fields of the United States Database&rdquo; (Nehring Associates, Inc., 2012). The augmented database is referred to here as the &ldquo;Comprehensive Resource Database&rdquo; (CRD). The CRD play and province classification scheme corresponds to the definitions used in the 1995 USGS National Oil and Gas Assessment (NOGA). The profiles in this report consist of a resource table and a six-part figure showing the variation of reservoir parameters selected because of their importance in the choice of a miscible or immiscible method for CO 2 -EOR and in the assessment of potential oil recovery using the EOR processes. A subset of these reservoirs may be available for either miscible- or immiscible-type flooding for CO 2 -EOR. Plays with fewer than 10 oil reservoirs were not graphed and were omitted from the province profiles. For this report and for the purposes of screening reservoirs as candidates for the application of CO 2 -EOR methods, oil reservoirs must have no more than 10,000 standard cubic feet of natural gas per barrel of oil at surface conditions. Oil-bearing plays presented in this report must contain at least one oil reservoir so defined. The profile plots allow geologists to evaluate the range of empirical and default values of the oil reservoir characteristics within a play and across plays that belong to the same province in the CRD. For most plays, the default estimates can be identified by the stacking of points at a single value on strip charts in the profiles. Reasonable default values should be within the range of the reservoir parameter values assigned by Nehring Associates, Inc. (2012), to reservoirs of that particular play. Each province profile figure consists of five strip charts and a boxplot. The five strip charts display for individual plays the following reservoir-fluid and reservoir properties: A , oil density (American Petroleum Institute [API] gravity in degrees); B , computed pseudo-Dykstra-Parsons coefficient; C , reservoir porosity (in percent); D , reservoir permeability (in millidarcies); and E , estimates of the original oil in place (OOIP) per unit volume of reservoir rock (in barrels per acre-foot). The OOIP per unit volume of reservoir rock is an indicator of the relative richness of the oil reservoir and is derived from estimates in the CRD of OOIP, reservoir acreage, and net pay. The net pay is the interval of productive reservoir rock. The same data for OOIP per unit volume are graphed as a strip chart ( E ) and a boxplot ( F ).

Open-File Report↗
USGS1978

Ground-water data on the Hudson River basin, New York

Ground water in the Hudson River basin occurs in unconsolidated deposits and consolidated rock. Sand and gravel units of the unconsolidated deposits, which occur principally in valley bottoms, form the best aquifers and commonly provide well yields of several hundred gallons per minute. Carbonate aquifers are the most productive consolidated rock units. Ground water in the Hudson River basin is generally hard and may contain appreciable amounts of iron, salts in solution, or sulfur locally. Basic data on the availability of ground water in the Hudson River drainage area are compiled in (1) a hydrogeologic map of the drainage basin; (2) a table of well depths, yields, concentrations of selected chemical constituents, and hardness of ground water, listed by county and aquifer type; (3) a short text describing the occurrence of ground water in the basin; and (4) a bibliography of ground-water reports pertinent to the area studied. (Woodard-USGS)

Open-File Report↗
USGS2005

Water-quality, phytoplankton, and trophic-status characteristics of Big Base and Little Base lakes, Little Rock Air Force Base, Arkansas, 2003-2004

Little Rock Air Force Base is the largest C-130 base in the Air Force and is the only C-130 training base in the Department of Defense. Little Rock Air Force Base is located in central Arkansas near the eastern edge of the Ouachita Mountains, near the Mississippi Alluvial Plain, and within the Arkansas Valley Ecoregion. Habitats include upland pine forests, upland deciduous forest, broad-leaved deciduous swamps, and two small freshwater lakes?Big Base Lake and Little Base Lake. Big Base and Little Base Lakes are used primarily for recreational fishing by base personnel and the civilian public. Under normal (rainfall) conditions, Big Base Lake has a surface area of approximately 39 acres while surface area of Little Base Lake is approximately 1 acre. Little Rock Air Force Base personnel are responsible for managing the fishery in these two lakes and since 1999 have started a nutrient enhancement program that involves sporadically adding fertilizer to Big Base Lake. As a means of determining the relations between water quality and primary production, Little Rock Air Force Base personnel have a need for biological (phytoplankton density), chemical (dissolved-oxygen and nutrient concentrations), and physical (water temperature and light transparency) data. To address these monitoring needs, the U.S. Geological Survey in cooperation with Little Rock Air Force Base, conducted a study to collect and analyze biological, chemical, and physical data. The U.S. Geological Survey sampled water quality in Big Base Lake and Little Base Lake on nine occasions from July 2003 through June 2004. Because of the difference in size, two sampling sites were established on Big Base Lake, while only one site was established on Little Base Lake. Lake profile data for Big Base Lake indicate that low dissolved- oxygen concentrations in the hypolimnion probably constrain most fish species to the upper 5-6 feet of depth during the summer stratification period. Dissolved-oxygen concentrations in Big Base Lake below a depth of 6 feet generally were less than 3 milligrams per liter for summer months that were sampled in 2003 and 2004. Some evidence indicates that phosphorus was limiting primary production during the sampling period. Dissolved nitrogen constituents frequently were detected in water samples (indicating availability) but dissolved phosphorus constituents-orthophosphorus and dissolved phosphorus-were not detected in any samples collected at the two lakes. The absence of dissolved phosphorus constituents and presence of total phosphorus indicates that all phosphorus was bound to suspended material (sediment particles and living organisms). Nitrogen:phosphorus ratios on most sampling occasions tended to be slightly higher than 16:1, which can be interpreted as further indication that phosphorus could be limiting primary production to some extent. An alkalinity of 20 milligrams per liter of calcium carbonate or higher is recommended to optimize nutrient availability and buffering capacity in recreational fishing lakes and ponds. Median values for water samples collected at the three sites ranged from 12-13 milligrams per liter of calcium carbonate. Alkalinities ranged from 9-60 milligrams per liter of calcium carbonate, but 13 of 17 samples collected at the deepest site had alkalinities less than 20 milligrams per liter of calcium carbonate. Results of three trophic-state indices, and a general trophic classification, as well as abundant green algae and large growths of blue-green algae indicate that Big Base Lake may be eutrophic. Trophic-state index values calculated using total phosphorus, chlorophyll a, and Secchi disc measurements from both lakes generally exceeded criteria at which lakes are considered to be eutrophic. A second method of determining lake trophic status-the general trophic classification-categorized the three sampling sites as mesotrophic or eutrophic. Green algae were found to be in abundance throughout mos

Scientific Investigations Report↗
USGS2010

Spectral assessment of new ASTER SWIR surface reflectance data products for spectroscopic mapping of rocks and minerals

ASTER reflectance spectra from Cuprite, Nevada, and Mountain Pass, California, were compared to spectra of field samples and to ASTER-resampled AVIRIS reflectance data to determine spectral accuracy and spectroscopic mapping potential of two new ASTER SWIR reflectance datasets: RefL1b and AST_07XT. RefL1b is a new reflectance dataset produced for this study using ASTER Level 1B data, crosstalk correction, radiance correction factors, and concurrently acquired level 2 MODIS water vapor data. The AST_07XT data product, available from EDC and ERSDAC, incorporates crosstalk correction and non-concurrently acquired MODIS water vapor data for atmospheric correction. Spectral accuracy was determined using difference values which were compiled from ASTER band 5/6 and 9/8 ratios of AST_07XT or RefL1b data subtracted from similar ratios calculated for field sample and AVIRIS reflectance data. In addition, Spectral Analyst, a statistical program that utilizes a Spectral Feature Fitting algorithm, was used to quantitatively assess spectral accuracy of AST_07XT and RefL1b data.Spectral Analyst matched more minerals correctly and had higher scores for the RefL1b data than for AST_07XT data. The radiance correction factors used in the RefL1b data corrected a low band 5 reflectance anomaly observed in the AST_07XT and AST_07 data but also produced anomalously high band 5 reflectance in RefL1b spectra with strong band 5 absorption for minerals, such as alunite. Thus, the band 5 anomaly seen in the RefL1b data cannot be corrected using additional gain adjustments. In addition, the use of concurrent MODIS water vapor data in the atmospheric correction of the RefL1b data produced datasets that had lower band 9 reflectance anomalies than the AST_07XT data. Although assessment of spectral data suggests that RefL1b data are more consistent and spectrally more correct than AST_07XT data, the Spectral Analyst results indicate that spectral discrimination between some minerals, such as alunite and kaolinite, are still not possible unless additional spectral calibration using site specific spectral data are performed. ?? 2010.

Remote Sensing of Environment↗
USGS1950

Value of domestic production of minerals from various classes of rocks

Fluids and sedimentary rocks accounted for 48 and 36 percent, respectively, of the total value of the 1946 domestic mineral production. The epigenetic (vein and replacement) and metamorphic deposits each contributed 6 percent of the total, and residual and igneous deposits accounted for 3 and 1 percent, respectively. Fuels were the most valuable of all the minerals produced--77 percent of the total. Petroleum, natural gas, and similar fluid fuels accounted for 47 percent of the total production and 98 percent of that from fluids; bituminous coal made up 24 percent of the total production and 67 percent of that from sedimentary rocks; anthracite coal was valued at 6 percent of the total production and 92 percent of that from metamorphic rocks. Exclusive of fuels, the bulk of the production of nonmetallics, and of the total mineral production too, was from sedimentary rocks (74 and 50 percent, respectively) and from veins and replacements (8 and 28 percent, respectively). Most of the production of metals, however, was from veins, etc. (62 percent) and residuum (29 percent).

Economic Geology↗
USGS1992

Bedrock geology and mineral resources of the Knoxville 1° x 2° quadrangle, Tennessee, North Carolina, and South Carolina

The Knoxville 1° x 2° quadrangle spans the Southern Blue Ridge physiographic province at its widest point from eastern Tennessee across western North Carolina to the northwest corner of South Carolina. The quadrangle also contains small parts of the Valley and Ridge province in Tennessee and the Piedmont province in North and South Carolina. Bedrock in the Valley and Ridge consists of unmetamorphosed, folded and thrust-faulted Paleozoic miogeoclinal sedimentary rocks ranging in age from Cambrian to Mississippian. The Blue Ridge is a complex of stacked thrust sheets divided into three parts: (1) a west flank underlain by rocks of the Late Proterozoic and Early Cambrian Chilhowee Group and slightly metamorphosed Late Proterozoic Ocoee Supergroup west of the Greenbrier fault; (2) a central part containing crystalline basement of Middle Proterozoic age (Grenville), Ocoee Supergroup rocks east of the Greenbrier fault, and rocks of the Murphy belt; and (3) an east flank containing the Helen, Tallulah Falls, and Richard Russell thrust sheets and the amphibolitic basement complex. All of the east flank thrust sheets contain polydeformed and metamorphosed sedimentary and igneous rocks of mostly Proterozoic age. The Blue Ridge is separated by the Brevard fault zone from a large area of rocks of the Inner Piedmont to the east, which contains the Six Mile thrust sheet and the ChaugaWalhalla thrust complex. All of these rocks are also polydeformed and metamorphosed sedimentary and igneous rocks. The Inner Piedmont rocks in this area occupy both the Piedmont and part of the Blue Ridge physiographic provinces. The intensity of deformation and metamorphism increases from west to east in the Blue Ridge. The west flank is mostly chlorite grade or relatively unmetamorphosed, and the central part of the Blue Ridge is mostly staurolite, garnet, or biotite grade, although sillimanite grade rocks occur along the eastern part of the central Blue Ridge in the vicinity of the leading edge of the Hayesville fault. The east flank of the Blue Ridge and much of the Inner Piedmont are at kyanite or sillimanite grade of regional metamorphism except for a zone of retrograde rocks in the Brevard fault zone and a small area of biotite-grade rocks in the extreme southwest part of the Grandfather Mountain window in the northeast corner of the quadrangle. The major mineral resources in the Knoxville 1° x 2° quadrangle are construction materials and a variety of industrial minerals mostly related to either granite and pegmatite or ultramafic rocks. Past production in the quadrangle of metals, which are of secondary importance relative to construction materials and industrial minerals, include copper in massive sulfides of the Besshi type, gold-bearing quartz veins, and residual iron and manganese deposits. Resources are discussed in relation to the Valley and Ridge, Blue Ridge, and Piedmont provinces. The following resources are the most important: A. Construction materials: Dimension stone of the Tennessee marble district in the Valley and Ridge. Limestone and dolomite of the Valley and Ridge. Sand and gravel and crushed stone, widespread throughout the quadrangle. B. Industrial minerals: Feldspar, flake mica, and quartz produced by flotation methods from the Spruce Pine Alaskite (muscovite granodiorite) in the east flank of the Blue Ridge. The district produces about half of the U.S. feldspar and significant amounts of the U.S. flake mica. Olivine produced from alpine-type dunite bodies in the east flank of the Blue Ridge. Talc and marble from the Murphy belt in the central part of the Blue Ridge. Vermiculite produced from a large deposit near Tigerville, S.C., in the Inner Piedmont. Deposit worked out and mine backfilled. Smaller deposits associated with ultramafic rocks in the east flank of the Blue Ridge are now uneconomic and have not been worked in the past 20 years. C. Metals: Copper in three deposits, the Fontana and Hazel Creek mines in the Great Smoky Mountains National Park in the Central Blue Ridge, and the Cullowhee mine in the east flank of the Blue Ridge. D. Organic fuels: The rocks of the quadrangle contain no coal and probably lie outside the maximum range in thermal maturity permitting the survival of oil. The rocks in the Valley and Ridge and for a short distance eastward below the west flank of the Blue Ridge probably lie within a zone of thermal maturity permitting the survival of natural gas. Consequently the western part of the quadrangle is an area of high risk for hydrocarbon exploration. No exploration drilling has been done in this belt.

North Carolina, South Carolina, Tennessee↗
USGS2004

Bedrock geology and mineral resources of the Knoxville 1° x 2° quadrangle, Tennessee, North Carolina, and South Carolina

The Knoxville 1&deg;x 2&deg; quadrangle spans the Southern Blue Ridge physiographic province at its widest point from eastern Tennessee across western North Carolina to the northwest corner of South Carolina. The quadrangle also contains small parts of the Valley and Ridge province in Tennessee and the Piedmont province in North and South Carolina. Bedrock in the Valley and Ridge consists of unmetamorphosed, folded and thrust-faulted Paleozoic miogeoclinal sedimentary rocks ranging in age from Cambrian to Mississippian. The Blue Ridge is a complex of stacked thrust sheets divided into three parts: (1) a west flank underlain by rocks of the Late Proterozoic and Early Cambrian Chilhowee Group and slightly metamorphosed Late Proterozoic Ocoee Supergroup west of the Greenbrier fault; (2) a central part containing crystalline basement of Middle Proterozoic age (Grenville), Ocoee Supergroup rocks east of the Greenbrier fault, and rocks of the Murphy belt; and (3) an east flank containing the Helen, Tallulah Falls, and Richard Russell thrust sheets and the amphibolitic basement complex. All of the east flank thrust sheets contain polydeformed and metamorphosed sedimentary and igneous rocks of mostly Proterozoic age. The Blue Ridge is separated by the Brevard fault zone from a large area of rocks of the Inner Piedmont to the east, which contains the Six Mile thrust sheet and the ChaugaWalhalla thrust complex. All of these rocks are also polydeformed and metamorphosed sedimentary and igneous rocks. The Inner Piedmont rocks in this area occupy both the Piedmont and part of the Blue Ridge physiographic provinces. The intensity of deformation and metamorphism increases from west to east in the Blue Ridge. The west flank is mostly chlorite grade or relatively unmetamorphosed, and the central part of the Blue Ridge is mostly staurolite, garnet, or biotite grade, although sillimanite grade rocks occur along the eastern part of the central Blue Ridge in the vicinity of the leading edge of the Hayesvil Ie fault. The east flank of the Blue Ridge and much of the Inner Piedmont are at kyanite or silli manite grade of Manuscript approved for publication February 22, 1991. regional metamorphism except for a zone of retrograde rocks in the Brevard fault zone and a small area of biotite-grade rocks in the extreme southwest part of the Grandfather Mountain window in the northeast corner of the quadrangle. The major mineral resources in the Knoxville 1&deg;x2&deg; quadrangle are construction materials and a variety of industrial minerals mostly related to either granite and pegmatite or ultramafic rocks. Past production in the quadrangle of metals, which are of secondary importance relative to construction materials and industrial minerals, include copper in massive sulfides of the Besshi type, gold-bearing quartz veins, and residual iron and manganese deposits. Resources are discussed in relation to the Valley and Ridge, Blue Ridge, and Piedmont provinces. The following resources are the most important: A. Construction materials: Dimension stone of the Tennessee marble district in the Valley and Ridge. Limestone and dolomite of the Valley and Ridge. Sand and gravel and crushed stone, widespread throughout the quadrangle. B. Industrial minerals: Feldspar, flake mica, and quartz produced by flotation methods from the Spruce Pine Alaskite (muscovite granodiorite) in the east flank of the Blue Ridge. The district produces about half of the U.S. feldspar and significant amounts of the U.S. flake mica. Olivine produced from alpine-type dunite bodies in the east flank of the Blue Ridge. Talc and marble from the Murphy belt in the central part of the Blue Ridge, Vermiculite produced from a large deposit near Tigerville, S.C-, in the Inner Piedmont. Deposit worked out and mine backfilled. Smaller deposits associated with ultramafic rocks in the east flank of the Blue Ridge are now uneconomic and have not been worked in the past 20 years. C. Metals: Copper in three deposits, the Fontana and Hazel Creek mines in the Great Smoky Mountains Abstract Figure 1. Location of the Knoxville 1&ordm;x2&ordm; quadrangle, with state and county boundaries National Park in the Central Blue Ridge, and the Cullowhee mine in the east flank of the Blue Ridge. D. Organic fuels: The rocks of the quadrangle contain no coal and probably lie outside the maximum range in thermal maturity permitting the survival of oil. The rocks in the Valley and Ridge and for a short distance eastward below the west flank of the Blue Ridge probably lie within a zone of thermal maturity permitting the survival of natural gas. Consequently the western part of the quadrangle is an area of high risk for hydrocarbon exploration. No exploration drilling has been done in this belt.

North Carolina, South Carolina, Tennessee↗
USGS2004

Ad Duwayhi, Saudi Arabia: Geology and geochronology of a neoproterozoic intrusion-related gold system in the Arabian shield

The Ad Duwayhi gold deposit, located in the east-central part of the Arabian shield, is the newest gold discovery in Saudi Arabia. Exploration to date has identified a gold resource of greater than 1 million ounces (oz) with significant potential for expansion. Gold mineralization was closely associated, in time and space, with emplacement of a late- to postorogenic, intracrustal, northwest-oriented granite body (659 &plusmn; 7 Ma) and comagmatic square quartz porphyry (646 &plusmn; 11 Ma), a hypabyssal and perhaps younger phase of the granite. Mineralization was largely confined to northeast-striking, southeast-dipping fault zones. Hydrothermal alteration consisted of early biotitic alteration overprinted by sericitic alteration. Sericitic alteration was coincident with gold mineralization and produced a quartz-sericite-carbonate-pyrite-rutile mineral assemblage, found both as vein fill and wall-rock alteration products. Mineralization styles, in the following general paragenetic sequence, include (1) quartz-molybdenite veins in and near the granite stock, (2) low-grade gold-bearing quartz vein breccia in and along the margins of the granite stock, (3) gold-bearing stockwork and sheeted quartz veins, and (4) massive to banded gold-rich tabular quartz veins. The gold-bearing stockwork, sheeted, and tabular veins are generally spatially associated with square quartz porphyry dikes and more distal to the granite stock. Mineralized zones at Ad Duwayhi are characterized by low sulfide and base metal content and gold/silver ratios of approximately 6/1. Gold shows no significant correlation with other metals, except lead, and moderate correlation with silver. Re-Os dating of molybdenite from a quartz-molybdenite vein and a tabular quartz vein with cogenetic gold produced robust ages of 655.6 &plusmn; 2.7 and 649.9 &plusmn; 2.3 Ma, respectively, documenting that gold mineralization and crystallization of granite and square quartz porphyry were, within uncertainty, coeval events. This age correlation combined with granite textural features, the presence of unidirectional solidification textures in granite and square quartz porphyry, and the nature and time-space distribution of mineralization styles, all indicate that mineralization evolved in and near the interface between a crystallizing magma and the surrounding rocks and, thus, is consistent with an intrusion-related genesis. In light of our findings at Ad Duwayhi, a reassessment of similar intrusion-hosted deposits in the Arabian shield is warranted, and areas of late- to postorogenic plutonism, particularly in the Afif composite terrane, should be considered prospective for intrusion-related gold systems.

Economic Geology↗
USGS2007

Time, space, and composition relations among northern Nevada intrusive rocks and their metallogenic implications

Northern Nevada contains &sim;360 igneous intrusions subequally distributed among three age groups: middle Tertiary, Cretaceous, and Jurassic. These intrusions are dominantly granodiorite and monzogranite, although some are more mafic. Major-oxide and trace-element compositions of intrusion age groups are remarkably similar, forming compositional arrays that are continuous, overlapping, and essentially indistinguishable. Within each age group, compositional diversity is controlled by a combination of fractional crystallization and two-component mixing. Mafic intrusions represent mixing of mantle-derived magma and assimilated continental crust, whereas intermediate to felsic intrusions evolved by fractional crystallization. Several petrologic parameters suggest that the northern Nevada intrusion age groups formed in a variety of subduction-related, magmatic arc settings: Jurassic intrusions were likely formed during backarc, slab-window magmatism related to breakoff of the Mezcalera plate; Cretaceous magmatism was related to rapid, shallow subduction of the Farallon plate and consequent inboard migration of arc magmatism; and Tertiary magmatism initially swept southward into northern Nevada in response to foundering of the Farallon plate and was followed by voluminous Miocene bimodal magmatism associated with backarc continental rifting. Nearly 3000 hydrothermal mineral deposits (many only small uneconomic occurrences), of diverse size and type, are spatially and (or) genetically associated with northern Nevada intrusions; significantly, the largest and most important deposits are aligned along prominent mineral-deposit trends. Because northern Nevada is a globally significant metallogenic province, determining whether age, modal composition, and geochemical features of associated intrusive rocks discriminate productive intrusions is important. Mineral-deposit types, including W vein and skarn, polymetallic vein, distal disseminated Au-Ag, porphyry Cu-Mo-W-Au, and epithermal Ag-Au deposits, all spatially and genetically associated with intrusions and known to involve magmatic inputs, are emphasized in this analysis. In addition, although evidence for a direct magmatic input, other than heat, is scarce for Carlin-type gold deposit formation, this deposit type was included because of its economic significance. Consequently, intrusions along mineral-deposit trends, in particular those associated with the largest and economically most significant mineral deposits, were a focus of the investigation. Importantly, modal composition, age, and geochemical characteristics of intrusions associated with large mineral deposits along the trends, are indistinguishable from non-mineralized intrusions in northern Nevada and thus do not identify intrusions associated with significant deposits. Moreover, intrusion age and composition show little correlation with mineral-deposit type, abundance, and size. Given the lack of diagnostic characteristics for intrusions associated with deposits, it is uncertain whether age, modal composition, and geochemical data can identify intrusions associated with mineral deposits. These findings suggest that associations between northern Nevada intrusions and mineral deposits reflect superimposition of many geologic factors, none of which was solely responsible for mineral-deposit formation. These factors might include intrusion size, efficiency of fluid and metal extraction from magma, prevailing redox and sulfidation conditions, or derivation of metals and ligands from host rocks and groundwater. The abundance and diversity of mineral deposits in northern Nevada may partly reflect geochemical inheritance, for example, along the mineral trends rather than the influence of petrologically unique magma or associated fluids.

Nevada↗
USGS2021

Evidence of glacial activity during MIS 4 in the Rocky Mountains, Colorado, USA

The Ziegler Reservoir fossil site near Snowmass Village, Colorado, provides a rare opportunity to examine environmental conditions in the Rocky Mountains during marine isotope stage (MIS) 4 (71–57 ka). Although recognized as a global-scale cold event, MIS 4 is typically absent from Rocky Mountain glacial chronologies because the geologic evidence was covered or destroyed during the subsequent, and more extensive, MIS 2 (Pinedale; 29–14 ka) glaciation. Ziegler Reservoir lies beyond the Pinedale glacial extent, which allowed for the preservation of a long-lived sequence of eolian sediments deposited in a lacustrine environment that spans from late MIS 6 (ca. 140 ka) through early MIS 3 (ca. 55 ka). Sediments dating to MIS 4 exhibit a significant increase in clay-sized particles, suggesting that the source areas, most likely nearby glacio-fluvial deposits, were enriched with fine-grained material at that time. We hypothesize that the elevated clay content was the result of rock flour production by nearby valley glaciers that were active in the Rocky Mountains during MIS 4. The results of our study illustrate how recognizing indirect evidence of glacial activity can result in a more complete record of past climate conditions than what could be achieved by the study of moraines alone.

Colorado↗
USGS2007

Geochemical data for stream-sediment, surface-water, rock, and vegetation samples from Red Mountain (Dry Creek), an unmined volcanogenic massive sulfide deposit in the Bonnifield District, Alaska Range, east-central Alaska

North-central and northeast Nevada contains numerous large plutons and smaller stocks but also contains many small, shallowly emplaced intrusive bodies, including dikes, sills, and intrusive lava dome complexes. Decades of geologic investigations in the study area demonstrate that many ore deposits, representing diverse ore deposit types, are spatially, and probably temporally and genetically, associated with these igneous intrusions. However, despite the number and importance of igneous instrusions in the study area, no synthesis of geochemical data available for these rocks has been completed. This report presents a synthesis of composition and age data for these rocks. The product represents the first phases of an effort to evaluate the time-space-compositional evolution of Mesozoic and Cenozoic magmatism in the study area and identify genetic associations between magmatism and mineralizing processes in this region.

Alaska↗
USGS2007

Geochemical Database for Intrusive Rocks of North-Central and Northeast Nevada

North-central and northeast Nevada contains numerous large plutons and smaller stocks but also contains many small, shallowly emplaced intrusive bodies, including dikes, sills, and intrusive lava dome complexes. Decades of geologic investigations in the study area demonstrate that many ore deposits, representing diverse ore deposit types, are spatially, and probably temporally and genetically, associated with these igneous intrusions. However, despite the number and importance of igneous intrusions in the study area, no synthesis of geochemical data available for these rocks has been completed. This report presents a synthesis of geochemical data for these rocks. The product represents the first phases of an effort to evaluate the time-space-compositional evolution of Mesozoic and Cenozoic magmatism in the study area and identify genetic associations between magmatism and mineralizing processes in this region.

Data Series↗
USGS1977

Genesis of a zoned granite stock, Seward Peninsula, Alaska

A composite epizonal stock of biotite granite has intruded a diverse assemblage of metamorphic rocks in the Serpentine Hot Springs area of north-central Seward Peninsula, Alaska. The metamorphic rocks include amphibolite-facies orthogneiss and paragneiss, greenschist-facies fine-grained siliceous and graphitic metasediments, and a variety of carbonate rocks. Lithologic units within the metamorphic terrane trend generally north-northeast and dip moderately toward the southeast. Thrust faults locally juxtapose lithologic units in the metamorphic assemblage, and normal faults displace both the metamorphic rocks and some parts of the granite stock. The gneisses and graphitic metasediments are believed to be late Precambrian in age, but the carbonate rocks are in part Paleozoic. Dating by the potassium-argon method indicates that the granite stock is Late Cretaceous. The stock has sharp discordant contacts, beyond which is a well-developed thermal aureole with rocks of hornblende hornfels facies. The average mode of the granite is 29 percent plagioclase, 31 percent quartz, 36 percent K-feldspar, and 4 percent biotite. Accessory minerals include apatite, magnetite, sphene, allanite, and zircon. Late-stage or deuteric minerals include muscovite, fluorite, tourmaline, quartz, and albite. The stock is a zoned complex containing rocks with several textural facies that are present in four partly concentric zones. Zone 1 is a discontinuous border unit, containing fine- to coarse-grained biotite granite, that grades inward into zone 2. Zone 2 consists of porphyritic biotite granite with oriented phenocrysts of pinkish-gray microcline in a coarse-grained equigranular groundmass of plagioclase, quartz, and biotite. It is in sharp, concordant to discordant contact with rocks of zone 3. Zone 3 consists of seriate-textured biotite granite that has been intruded by bodies of porphyritic biotite granite containing phenocrysts of plagioclase, K-feldspar, quartz, and biotite in an aplitic groundmass. Flow structures, pegmatite and aplite segregations, and miarolitic cavities are common in the seriate-textured granite. Zone 4, which forms the central part of the complex, consists of fine- to medium-grained biotite granite and locally developed leucogranite. Small miarolitic cavities are common within it. Eight textural facies have been defined within the complex, and mineralogic, petrographic, modal, and chemical variations are broadly systematic within the facies sequence. Study of these variations shows that the gradational facies of zones l and 2 systematically shift toward more mafic compositions inward within the complex. Seriate-textured rocks of zone 3 are similar in composition to those of zone 2, but porphyritic rocks of zone 3 and rocks of zone 4 mark shifts to more felsic compositions. These late-crystallizing felsic rocks are products of an interior residual magma system. This system was enriched in water and certain trace elements including tin, lithium, niobium, lead, and zinc. The complex as a whole has higher concentrations of these elements than many other granites. The nature of this geochemical specialization is particularly well demonstrated by the trace-element composition of biotite. The crystallization history of the pluton was complex. The available data suggest that this history could have included: (1) chilling and metasomatic alteration adjacent to the contact, (2) in-situ crystallization in several marginal facies accompanied by some transfer of residual constituents toward interior parts of the pluton, (3) slight upward displacement of magma that was subjacent to the crystallized walls, accompanied by disequilibrium crystallization and local vapor saturation, (4) upward displacement of part of the residual water-rich interior magma, accompanied by rapid loss of a separated vapor phase, and (5) displacement of the margins of the pluton by normal faults, accompanied by loss of an exsolved vapor phase from th

Open-File Report↗