Geology ReportsSearch

SEARCH · Geology Reports

Results for “Rock Products”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 recordsLinked to original sources

Magnetic properties, acid neutralization capacity, and net acid production of rocks in the Animas River Watershed Silverton, Colorado

Federal land managers along with local stakeholders in the Upper Animas River watershed near Silverton, Colorado are actively designing and implementing mine waste remediation projects to mitigate the effects of acid mine drainage from several abandoned hard rock metal mines and mills. Local source rocks with high acid neutralization capacity (ANC) within the watershed are of interest to land managers for use in these remediation projects. A suite of representative samples was collected from propylitic to weakly sericitic-altered volcanic and plutonic rocks exposed in outcrops throughout the watershed. Acid-base accounting laboratory methods coupled with mineralogic and geochemical characterization provide insight into lithologies that have a range of ANC and net acid production (NAP). Petrophysical lab determinations of magnetic susceptibility converted to estimates for percent magnetite show correlation with the environmental properties of ANC and NAP for many of the lithologies. A goal of our study is to interpret watershed-scale airborne magnetic data for regional mapping of rocks that have varying degrees of ANC and NAP. Results of our preliminary work are presented here.

Conference Paper

Mineral resources of the Whipple Mountains and Whipple Mountains Addition Wilderness Study Areas, San Bernardino County, California

At the request of the U.S. Bureau of Land Management, approximately 85,100 acres of the Whipple Mountains Wilderness Study Area (CDCA-312) and 1,380 acres of the Whipple Mountains Addition Wilderness Study Area (AZ-050-010) were evaluated for identified mineral resources (known) and mineral resource potential (undiscovered). In this report, the Whipple Mountains and Whipple Mountains Addition Wilderness Study Areas are referred to as simply "the study area." Most of the mines and prospects with identified resources in the Whipple Mountains Wilderness Study Area are within areas designated as having mineral resource potential. The area in and around the Turk Silver mine and the Lucky Green group and the area near the northwest boundary of the study area have high mineral resource potential for copper, lead, zinc, gold, and silver. An area along the west boundary of the study area has moderate resource potential for copper lead, zinc, gold, and silver. An area in the east adjacent to the Whipple Mountains Addition Wilderness Study Area has moderate resource potential for copper, gold, and silver resources. One area on the north boundary and one on the southeast boundary of the study area have low mineral resource potential for copper, lead, zinc, gold, and silver. Two areas, one on the north boundary and one inside the east boundary of the study area, have moderate resource potential for manganese. A small area inside the south boundary of the study area has high resource potential for decorative building stone, and the entire study area has low resource potential for sand and gravel and other rock products suitable for construction. Two areas in the eastern part of the study area have low resource potential for uranium. There is no resource potential for oil and gas or geothermal resources in the Whipple Mountains Wilderness Study Area. Sites within the Whipple Mountains Wilderness Study Area with identified resources of copper, gold, silver, manganese and (or) decorative building stone are located at the Stewart mine, New American Eagle mine, Turk Silver mine, Twin Lode mine, decorative stone property, Lucky Green group, Blue Cloud mine, Nickel Plate mine, Crescent mine, Quadrangle Copper group, and the Copper Basin mine. The Whipple Mountains Addition Wilderness Study Area has moderate resource potential for copper, gold, and silver resources and low resource potential for sand and gravel and other rock products. There is no resource potential for oil and gas or for geothermal energy in the Whipple Mountains Addition Wilderness Study Area. Although there are no identified resources in the Whipple Mountains Addition Wilderness Study Area, sites within and immediately adjacent warrant further study because of gold assays from widespread, numerous samples.

California

Evidence for Paleocene dinosaurs in the Ojo Alamo Sandstone, San Juan Basin, New Mexico

Dinosaur fossils from the Ojo Alamo Sandstone, San Juan Basin, New Mexico, have been a puzzle to geologists for decades because other stratigraphic and paleontologic evidence indicates that this formation is Paleocene in age. The Paleocene age of the Ojo Alamo is based on the following evidence: (1) the lowermost part of the Nacimiento Formation, which conformably overlies and intertongues with the Ojo Alamo Sandstone in the Ojo Alamo type area in the southern part of the basin, contains Paleocene (Puercan) mammalian fossils; (2) plant megafossils collected from the Ojo Alamo indicate a Tertiary age for this rock unit; (3) pollen-productive rock samples collected from the Ojo Alamo at several localities in the basin have, without exception, yielded Paleocene-age palynomorph assemblages, and conversely, no Cretaceous pollen has ever been reported from Ojo Alamo rock samples. We report here the first discovery of Paleocene palynomorphs from Ojo Alamo Sandstone outcrops in the northern San Juan Basin. The pollen-producing rock samples were collected from a coaly, carbonaceous shale bed 12-m above the base of the Ojo Alamo and 3-m below the level of a large hadrosaur femur (1310-mm long and weighing about 130 kg) collected from this site. The bone was recovered from a cobble-to-boulder conglomeratic sandstone but shows no evidence of abrasion by erosion indicating almost instant burial after death of the animal and early mineralization of the femur. It is our opinion that this bone was not reworked from underlying Cretaceous strata. The data from the San Juan River site indicate that dinosaurs did not die out at the end of the Cretaceous in the San Juan Basin, but lived on for as much as a few hundred thousand years into the Paleocene before finally becoming extinct.

New Mexico

Rock-forming metals and Pb in modern Alaskan snow

Metal concentrations in annual and subannual increments of snowpack from the accumulation zone of a south central Alaska glacier indicate that the deposition of Pb with and upon snow is decoupled from that of rock dusts. Rock dusts accumulate, apparently as dry deposition, on the topmost, exposed surfaces of snowpacks in spring and summer, whereas Pb does not. Pb concentration is elevated throughout the latest one third of an annual snowpack, whereas that of rock dusts is not. For whole-year snowpacks, there is a generally sympathetic relationship among concentration of Pb, concentration of rock dust, degree of dominance of rock dusts over ocean solutes, and ferromagnesian character of the rock dusts; however, the fractional abundance of Pb in whole year samples may decrease when rock dust masses become large and/or when rock dusts dominate most strongly over salts. The metal suite chosen to characterize rock dusts and to distinguish them from ocean solutes gives detailed information about rock type of dust source areas and about the nature of the degraded rock products that are taken up, transported, and deposited by the atmosphere. Rock dusts are present at concentrations of only about 300 nanograms (ng) of dust per gram of snow in the Alaskan snowpacks. Concentrations of Pb in the Alaska snow samples are moderate, ranging from 0.1 to 0.3 ng Pb/g snow. This contrasts with larger Pb concentrations of 0.4 to 0.9 ng Pb/g snow in whole-year snowpack samples from the Sierra Nevada, California; with similar to smaller concentrations from north and south Greenland of about 0.04 ng Pb/g snow or less, and about 0.2 ng Pb/g snow or less, respectively, and with much smaller concentrations from Antarctica, now believed to range from a minimum of about 0.001 to a maximum of 0.005 (or 0.01) ng Pb/g snow.

Journal of Geophysical Research D: Atmospheres

Distribution of copper in biotite and biotite alteration products in intrusive rocks near two Arizona porphyry copper deposits

Biotite and its alteration products (primarily chlorite) from igneous rocks around the Ray and Esperanza (Esperanza-Sierrita) porphyry copper deposits, Arizona, were analyzed for copper by electron microprobe. The copper occurs in amounts >90 p/m (limit of detection) in most of the chlorites analyzed, is concentrated at the optical and chemical boundary of chlorite and biotite, and is not associated with sulfur. Most unaltered igneous and hydrothermal biotites analyzed contain <90 p/m Cu, and except for one sample, all copper that was detected can be explained as contamination by copper from chlorite grains. The paucity of detectable copper in igneous and hydrothermal biotite and its presence in daughter chlorite suggest that the positive association noted by some workers between the proximity of an ore deposit and the copper content of biotite might be partly the result: of increased amounts of chloritization of biotite near a deposit coupled with difficulty in physically cleaning the biotite separates. Additionally, previous speculations that (1) part of the copper in a deposit may come from altered biotite, and (2) copper in biotite indicates how copper behaves in a differentiating magma, are of doubtful value if based on data derived from analyses of bulk mineral separates.

Arizona

Titanium deposits in alkalic igneous rocks

Many types of alkalic rocks are enriched in Ti0 2 relative to the average for the crust. Silicate minerals in these rocks may have high Ti0 2 contents, but the oxides ilmenite, rutile, brookite, and perovskite are also characteristic primary phases. These tend to be higher in niobium than are the same minerals from other rock suites. At Tapira, Brazil, titanium minerals in a carbonatite complex comprise tens of millions of tons contained Ti0 2. Anatase (as "leucoxene") is present in laterite lying over parent rocks containing perovskite, ilmenite, and rutile. In other discovered localities of alkalic rocks, production of titanium minerals is at best economically marginal.

Open-File Report

Hydrogeologic conditions and simulation of ground-water flow in the Greater Orlando Metropolitan Area, East-Central Florida

A finite-difference ground-water flow model was used to simulate the effects of both modern-day (1988) and projected 2010 ground-water withdrawals on the Floridan aquifer system in the greater Orlando metropolitan area. This area covers about 2,500 square miles and includes all of Orange and Seminole Counties and parts of Lake, Volusia, Brevard, Osceola, and Polk Counties. The hydrogeology of the area is characterized by a thin surficial aquifer underlain by the thick, highly productive rocks of the Floridan aquifer system. Water in the Upper Floridan aquifer is brackish (chloride concentrations greater than 1,000 milligrams per liter) in discharge areas beneath and near the St. Johns and Wekiva Rivers and is freshest (chloride concentrations less than 100 milligrams per liter) inrecharge areas. A slight trend toward increasing concentrations of dissolved solids, chloride, and sulfate has been observed at Upper Floridan aquifer springs. Chloride concentrations in the Upper Floridan aquifer measured between 1966 and 1993 at the Cocoa well field have increased from 50 milligrams per liter to 120 milligrams per liter; concentrations measured in the Lower Floridan aquifer between 1966 and 1993 have increasedfrom 600 milligrams per liter to 3,000 milligrams per liter. The flow model was calibrated by comparing (a) simulated and estimated Upper Floridan aquifer predevelopment (unstressed) potentiometric surfaces, (b) simulated and measured heads at 142 Upper Floridan aquifer monitoring wells in 1988 (averageabsolute error of 1.8 feet), (c) simulated and measured discharge rates at 15 Upper Floridan aquifer springs in 1988 (306 cubic feet per second), and (d) simulated and measured drawdowns at 134 Upper Floridan aquifer monitoring wells between 1988 and May 1990 (58 and 95 percent of simulated drawdowns were within plus or minus 25and 50 percent of measured drawdowns, respectively). Relative to predevelopment conditions, model simulations indicate that about half of the 305 million gallons per day of water pumped from the Floridan aquifer system in 1988 was accounted for by increased recharge from the surficial aquifer system. About 23 cubic feet persecond was derived from increased lateral inflow. A storage coefficient of 1x10-3 provided the best comparisons of measured-to-simulated data during the transient simulation from January to May 1990. This storativity probably is greater than the true storativity of the Upper Floridan aquifer because storage contributions from the intermediateconfining unit were not accounted for during model design and development. Calibrated transmissivity ranged from 10,000 to greater than 400,000 feet squared per day in the Upper Floridan aquifer, and from 5,000 to 600,000 feet squared per day in the Lower Floridan aquifer. Calibrated intermediate confining unit leakance ranged from 1x10-5 to 4x10-3 per day and was highest in areas where the unit is thin or has been breached by numerous sinkholes. In general,calibrated transmissivity and leakance values were higher than associated aquifer-test values. Simulated recharge rates to the Upper Floridan aquifer from the surficial aquifer system ranged from less than 3 to 21 inches per year. Recharge rates of greater than 10 inches per year were simulated in areas of west Seminole, west Orange, east Lake, and southwest Volusia Counties. Recharge rates of less than 3 inches per year were simulated in east Orange and northeast Osceola Counties. The calibrated model was used to simulate the effects of increased Floridan aquifer withdrawals in the year 2010 (542 million gallons per day) on water levels and spring flow. Projected effects were simulated for both "wet" conditions (using 1988 fixed-head arrays) and for "dry" conditions (using May 1990 fixed-head arrays), thus bracketing a potential range of effects. Relative to simulated 1988 conditions, simulated 2010 spring flow decreased by 43 cubic f

Water-Resources Investigations Report

Mineral resource of the month: clays

Clays represent one of the largest mineral commodities in the world in terms of mineral and rock production and use. Many people, however, do not recognize that clays are used in an amazingly wide variety of applications. Use continues to increase worldwide as populations and their associated needs increase. Robert Virta, clay and shale commodity specialist for the U.S. Geological Survey, has prepared the following information about clays.

Geotimes

Radiogenic heat production in sedimentary rocks of the Gulf of Mexico basin, south Texas

Radiogenic heat production within the sedimentary section of the Gulf of Mexico basin is a significant source of heat. Radiogenic heat should be included in thermal models of this basin (and perhaps other sedimentary basins). We calculate that radiogenic heat may contribute up to 26% of the overall surface heat-flow density for an area in south Texas. Based on measurements of the radioactive decay rate of a-particles, potassium concentration, and bulk density, we calculate radiogenic heat production for Stuart City (Lower Cretaceous) limestones, Wilcox (Eocene) sandstones and mudrocks, and Frio (Oligocene) sandstones and mudrocks from south Texas. Heat production rates range from a low of 0.07 ±0.01 µW/m 3 in clean Stuart City limestones to 2.21 ±0.24 µW/m 3 in Frio mudrocks. Mean heat production rates for Wilcox sandstones, Frio sandstones, Wilcox mudrocks, and Frio mudrocks are 0.88, 1.19, 1.50, and 1.72 µW/m3, respectively. In general, the mudrocks produce about 30-40% more heat than stratigraphically equivalent sandstones. Frio rocks produce about 15% more heat than Wilcox rocks per unit volume of clastic rock (sandstone/mudrock). A one-dimensional heat- conduction model indicates that this radiogenic heat source has a significant effect on subsurface temperatures. If a thermal model were calibrated to observed temperatures by optimizing basal heat-flow density and ignoring sediment heat production, the extrapolated present-day temperature of a deeply buried source rock would be overestimated.

American Association of Petroleum Geologists Bulle

Summary appraisals of the nation's ground-water resources – New England region

The New England Region has a total area of about 62,400 square miles (160,000 km 2 ) and includes the States of Maine and New Hampshire, eastern Vermont, most of Massachusetts and Connecticut, all of Rhode Island, and a small part of southeastern New York. The longest stream is the Connecticut River, which extends from northern Vermont and New Hampshire, through western Massachusetts and central Connecticut, and drains into Long Island Sound. Other major streams are the Penobscot and Kennebec Rivers in Maine, the Androscoggin in Maine and New Hampshire, the Merrimack in New Hampshire and Massachusetts, and the Housatonic in western Massachusetts and Connecticut. Of the smaller streams, some, like the Charles River in the Boston area, are widely known because of their proximity to large population centers. Ground water occurs in two types of geologic materials: consolidated rocks and unconsolidated sedimentary rocks. The consolidated rocks underlie the entire region. They include crystalline igneous and metamorphic rocks and consolidated sedimentary rocks-shale, sandstone, and limestone and other carbonate rocks. The most productive unconsolidated rocks are sand and gravel of glacial origin. These deposits occur all over Cape Cod and nearby islands in southeastern Massachusetts and in many valleys throughout the region. Ground water is derived from precipitation. It can be intercepted for use by pumping from wells (1) before it discharges to the streams as base flow and (2) before it drains directly into coastal wetlands, bays, Long Island Sound, or the ocean. Withdrawals of fresh ground water in 1975 aggregated about 220 billion gallons (830 hm 3 ), or about 12 percent of the total freshwater withdrawals (from all sources) of 1,800 billion gallons (6,800 hm 3 ). In view of the available ground-water reserves, considerable additional water, for the anticipated continuing increase in population and economic activity, could be developed.

Connecticut, Maine, Massachusetts New Hampshire, N

Appalachian piedmont regolith: Relations of saprolite and residual soils to rock-type

Saprolite is a major product of rock weathering on the Appalachian Piedmont from New Jersey to Alabama. On the Piedmont, it is the primary substrate from which residual soils are developed. Properties of saprolite and residual soils are highly related to their parent rocks. Studies of cores and outcrops illustrate that rock structure and mineralogy control upland regolith zonation. Saprolite develops by in situ chemical alteration of a wide variety of mafic to highly silicic rocks. Thickness of upland saprolite varies from a few meters on mafic rocks to tens of meters on silicic rocks. Saprolite thickness decreases with increasing slope and saprolite is generally thin or absent in valley bottoms. Massive residual subsoils and soils develop by physical and chemical processes that alter the upper few meters of saprolite. The fabric, texture and mineralogy of residual soils are distinctly different from underlying saprolite. The boundary between soil and saprolite is often gradual, and often a zone of low permeability. Geologic maps are useful guides to Piedmont regolith thickness and zonation. In regional design studies, geologic maps and regolith characteristics can be useful in environmental decision-making.

Geotechnical Special Publication

Use of spatial statistics and isotopic tracers to measure the influence of arsenical pesticide use on stream sediment chemistry in New England, USA

Arsenical pesticides and herbicides, principally Pb arsenate, Ca arsenate, and Na arsenate with lesser use of other metal-As pesticides, were widely applied on apple, blueberry, and potato crops in New England during the first half of the twentieth century. Agricultural census data for this time period is used to define an agricultural index that identifies areas that are inferred to have used arsenical pesticides extensively. Factor analysis on metal concentrations in 1597 stream sediment samples collected throughout New England, grouped by agricultural-index categories, indicate a positive association of areas with stream sediment sample populations that contain higher As and Pb concentrations than samples from the region as a whole with sample site settings having high agricultural-index values. Population statistics for As and Pb concentrations and factor scores for an As-Pb factor all increase systematically and significantly with increasing agricultural-index intensity in the region, as tested by Kruskal-Wallis analysis. Lead isotope compositions for 16 stream sediments from a range of agricultural-index settings generally overlap the observed variation in rock sulfides and their weathering products; however, sediments collected from high agricultural-index settings have slightly more radiogenic Pb compositions, consistent with an industrial Pb contribution to these samples. Although weathering products from rocks are likely to be the dominant source of As and metals to most of the stream sediment samples collected in the region, the widespread use of arsenical pesticides and herbicides in New England during the early 1900-1960s appears to be a significant anthropogenic source of As and metals to many sediments in agricultural areas in the region and has raised background levels of As in some regions. Elevated concentrations of As in stream sediments are of concern for two reasons. Stream sediments with elevated As concentrations delineate areas with elevated background concentrations of As from both natural rock and anthropogenic sources that may contribute As to groundwater systems used for drinking water supplies. Conversion of agricultural land contaminated with arsenical pesticide residues to residential development may increase the likelihood that humans will be exposed to As. In addition, many stream sediment sites have As concentrations that exceed sediment quality guidelines established for freshwater ecosystems. Thirteen percent of the New England sediment sample sites exceed 9.79 mg/kg As, the threshold effects concentration (TEC), below which harmful effects are unlikely to be observed. Arsenic concentrations exceed 33 mg/kg, the probable effects concentration (PEC), above which harmful effects on sediment-dwelling organisms are expected to occur frequently, at 1.25% of the sediment sample sites. The sample sites that exceed the PEC value occur predominately in agricultural areas that used arsenical pesticides.

Conference Paper

Geologic history of sea water: An attempt to state the problem

Paleontology and biochemistry together may yield fairly definite information, eventually, about the paleochemistry of sea water and atmosphere. Several less conclusive lines of evidence now available suggest that the composition of both sea water and atmosphere may have varied somewhat during the past; but the geologic record indicates that these variations have probably been within relatively narrow limits. A primary problem is how conditions could have remained so nearly constant for so long. It is clear, even from inadequate data on the quantities and compositions of ancient sediments, that the more volatile materials—H 2 O, CO 2 , Cl, N, and S— are much too abundant in the present atmosphere, hydrosphere, and biosphere and in ancient sediments to be explained, like the commoner rock-forming oxides, as the products of rock weathering alone. If the earth were once entirely gaseous or molten, these “excess” volatiles may be residual from a primitive atmosphere. But if so, certain corollaries should follow about the quantity of water dissolved in the molten earth and the expected chemical effects of a highly acid, primitive ocean. These corollaries appear to be contradicted by the geologic record, and doubt is therefore cast on this hypothesis of a dense primitive atmosphere. It seems more probable that only a small fraction of the total “excess” volatiles was ever present at one time in the early atmosphere and ocean. Carbon plays a significant part in the chemistry of sea water and in the realm of living matter. The amount now buried as carbonates and organic carbon in sedimentary rocks is about 600 times as great as that in today's atmosphere, hydrosphere, and biosphere. If only 1/100 of this buried carbon were suddenly added to the present atmosphere and ocean, many species of marine organisms would probably be exterminated. Furthermore, unless CO 2 is being added continuously to the atmosphere-ocean system from some source other than rock weathering, the present rate of its subtraction by sedimentation would, in only a few million years, cause brucite to take the place of calcite as a common marine sediment. Apparently, the geologic record shows no evidence of such simultaneous extinctions of many species nor such deposits of brucite. Evidently the amount of CO 2 in the atmosphere and ocean has remained relatively constant throughout much of the geologic past. This calls for some source of gradual and continuous supply, over and above that from rock weathering and from the metamorphism of older sedimentary rocks. A clue to this source is afforded by the relative amounts of the different “excess” volatiles. These are similar to the relative amounts of the same materials in gases escaping from volcanoes, fumaroles, and hot springs and in gases occluded in igneous rocks. Conceivably, therefore, the hydrosphere and atmosphere may have come almost entirely from such plutonic gases. During the crystallization of magmas, volatiles such as H 2 O and CO 2 accumulate in the remaining melt and are largely expelled as part of the final fractions. Volcanic eruptions and lava flows have brought volatiles to the earth's surface throughout the geologic past; but intrusive rocks are probably a much more adequate source of the constituents of the atmosphere and hydrosphere. Judged by the thermal springs of the United States, hot springs (carrying only 1 per cent or less of juvenile matter) may be the principal channels by which the “excess” volatiles have escaped from cooling magmas below. This mechanism fails to account for a continuous supply of volatiles unless it also provides for a continuous generation of new, volatile-rich magmas. Possibly such local magmas form by a continuous process of selective fusion of subcrustal rocks, to a depth of several hundred kilometers below the more mobile areas of the crust. This would imply that the volume of the ocean has grown with time. On this point, geologic evidence permits differences of interpretation; the record admittedly does not prove, but it seems consistent with, an increasing growth of the continental masses and a progressive sinking of oceanic basins. Perhaps something like the following mechanism could account for a continuous escape of volatiles to the earth's surface and a relatively uniform composition of sea water through much of geologic time: (1) selective fusion of lower-melting fractions from deep-seated, nearly anhydrous rocks beneath the unstable continental margins and geosynclines; (2) rise of these selected fractions (as granitic and hydrous magmas) and their slow crystallization nearer the surface; (3) essentially continuous isostatic readjustment between the differentiating continental masses and adjacent ocean basins; and (4) renewed erosion and sedimentation, with resulting instability of continental margins and mountainous areas and a new round of selective fusion below.

Geological Society of America Bulletin

Lead isotopic compositions of common arsenical pesticides used in New England

The three most important arsenical pesticides and herbicides that were extensively used on apple, blueberry, and potato crops in New England from mid-1800s to recent times are lead arsenate, calcium arsenate, and sodium arsenate. Lead arsenate was probably the most heavily used of the arsenical pesticides until it was banned in 1988. Other metal-arsenic pesticides were also used but in lesser amounts. A recent report identified areas in New England where arsenical pesticides were used extensively (Robinson and Ayuso, 2004). On the basis of factor analysis of metal concentrations in stream sediment samples, a positive correlation with pesticide use was shown in regions having stream sediment sample populations that contained concentrations of high arsenic and lead. Lead isotope compositions of stream sediments from areas with heavy use of the pesticides could not be entirely explained by lead originating from rock sulfides and their weathering products. An industrial lead contribution (mostly from atmospheric deposition of lead) was suggested in general to explain the lead isotopic distributions of the stream sediments that could not be accounted for by the natural lead in the environment. We concluded that when agricultural land previously contaminated with arsenical pesticides is urbanized, pesticide residues in the soils and stream sediments could be released into the groundwater. No lead isotopic data characterizing the compositions of pesticides were available for comparison. We have determined the lead isotopic compositions of commonly used pesticides in New England, such as lead arsenate, sodium metaarsenite, and calcium arsenate, in order to assist in future isotopic comparisons and to better establish anthropogenic sources of Pb and As. New data are also presented for copper acetoarsenite (or Paris green), methyl arsonic acid and methane arsonic acid, as well as for arsanilic acid, all of which are used as feed additives to promote swine and poultry growth. The new data characterize these anthropogenic sources. The data show that the arsenical pesticides have similar compositions: 208Pb/207Pb = 2.3839-2.4721, 206Pb/207Pb = 1.1035-1.2010, and 206Pb/204Pb = 17.070-18.759 and, more importantly, that the pesticides overlap the composition of the stream sediments that represent the areas with the most extensive agricultural use. Copper acetoarsenite (Paris green), arsenic oxide, methyl arsonic acid, methane arsonic acid, and arsanilic acid were also analyzed and have lead isotope compositions that range widely. An important source of arsenic and metals to most of the stream sediment samples in New England appears to be weathering products from rocks and industrial lead, but the extensive use of arsenical pesticides and herbicides up to about the 1960s can also be a significant anthropogenic source in agricultural regions.

Open-File Report

Radiogenic heat production of contrasting magma series: Bearing on interpretation of heat flow

Variation in radiogenic heat production of rocks of diverse magma series (representative of calcic, calc-alkalic, alkali-calcic, and alkalic petrographic provinces on a worldwide basis) is better correlated with some form of magmatic differentiation index, rather than simply with potassium content alone as commonly supposed. The “lime-alkali” (Peacock) index generally gives the best correlation of the various indices tested. Plots of heat production for igneous suites versus indices of differentiation (“heat production trends”) demonstrate systematic correlations of heat productivity as functions of fractionation trends and/or spatial-temporal associations. In general, heat production trends of calcic suites tend to indicate lower radiogenic heat productivity than those of more alkalic suites for a given silica or potassium content. Because many recent measurements of heat flow in plutons can be linearly related to heat production of surface rocks, these “heat production trends” have important bearing on the interpretation of crustal heat flow. Our data suggest possible alternative interpretations of the heat production-heat flow pattern for the Sierra Nevada which differ from that in Lachen-bruch's (1968) preliminary geothermal model.

GSA Bulletin

Origin and evolution of mafic volcanism associated with 3 m.y. of andesite production at the Goat Rocks volcanic cluster, southern Washington Cascade Range

More than 3 m.y. of mafic volcanism near the Goat Rocks volcanic cluster in the southern Washington Cascade Range, USA, lends insight into the evolution of basalts and the subarc mantle at a long-lived, major arc volcanic locus. We contribute field observations, 40 Ar/ 39 Ar dates, paleomagnetic directions, and bulk rock and mineral compositions to characterize nine mafic units that erupted in association with the Goat Rocks volcanic cluster. The time frame of mafic volcanism, ca. 3.6 Ma to 60 ka, encompasses the lifespan of the central volcanic cluster (3.1 Ma to 115 ka), with a lull from ca. 2.7 Ma to 1.4 Ma. A climactic period of voluminous mafic activity and far-traveled lava flows, including construction of the Hogback Mountain shield volcano, coincided with voluminous andesite eruptions from the central volcanic cluster. The basaltic rocks in the Goat Rocks area are calc-alkaline to barely tholeiitic and have high field strength element depletion relative to large-ion lithophile elements characteristic of calc-alkaline basalts (CAB) of the Cascade volcanic arc. Unlike at neighboring andesitic volcanic centers (Mounts Adams, St. Helens, and Rainier), no other mafic end members such as high-aluminum olivine tholeiite (HAOT) or intraplate-type basalt (IPB) are present at or near the Goat Rocks volcanic cluster, although some of the calc-alkaline basalts in this study have IPB-like affinities. The Goat Rocks mafic units exhibit two main temporal trends in composition: (1) the most primitive basalts erupted earlier, compared to less primitive and more evolved compositions later, and (2) high field strength element concentrations are higher in the younger basalt units relative to the oldest two. In contrast to these temporal trends, the mafic units define two compositional groups that recur through time, a low-Sr and a high-Sr group, each with distinct trace element and Sr and Nd isotope ratios. Although radiogenic isotope ratios are generally aligned with High Cascades CAB and HAOT, some extend toward IPB of Mount Adams and Simcoe Mountains volcanic field. Olivine-dominated crystal fractionation at shallow pressure from a small range of parent magma compositions accounts for much of the variation among the basalts and basaltic andesites. A high-pressure fractionation model is plausible for only one of the youngest basalt units (basalt of Walupt Lake volcano). Mafic recharge and crustal assimilation accounts for the incompatible-element enriched composition of basaltic andesites erupted during construction of the largest andesitic centers, further supporting sustained basalt mass flux and thermal energy driving andesite genesis. We model the most primitive members of the Goat Rocks mafic units as partial melts of successively less depleted mantle in time. Variable degrees of fluxing with fluids and melts from subduction explain the distinction between high-Sr and low-Sr groups. We propose that mantle metasomatism by ancestral subduction and fluid-flux melting is heterogeneously distributed through the local subarc mantle and played a greater role in the genesis of the high-Sr basalt group. The limited range of primitive basalt types around the Goat Rocks volcanic cluster contrasts with the much greater diversity of basalts throughout the southern Washington to northern Oregon Cascade arc. On the other hand, the central volcanic cluster encompasses nearly the entire diversity observed at neighboring composite volcanoes. In the case of the Goat Rocks area at least, and perhaps attributable to the entire region, this means that the genesis of diverse intermediate magmas is independent from and does not require vastly different parental basalt compositions.

California, Oregon, Washington

Chemical analyses of coal, coal-associated rocks and coal combustion products collected for the National Coal Quality Inventory

In 1999, the USGS initiated the National Coal Quality Inventory (NaCQI) project to address a need for quality information on coals that will be mined during the next 20-30 years. At the time this project was initiated, the publicly available USGS coal quality data was based on samples primarily collected and analyzed between 1973 and 1985. The primary objective of NaCQI was to create a database containing comprehensive, accurate and accessible chemical information on the quality of mined and prepared United States coals and their combustion byproducts. This objective was to be accomplished through maintaining the existing publicly available coal quality database, expanding the database through the acquisition of new samples from priority areas, and analysis of the samples using updated coal analytical chemistry procedures. Priorities for sampling include those areas where future sources of compliance coal are federally owned. This project was a cooperative effort between the U.S. Geological Survey (USGS), State geological surveys, universities, coal burning utilities, and the coal mining industry. Funding support came from the Electric Power Research Institute (EPRI) and the U.S. Department of Energy (DOE).

Open-File Report

Geological characterization of remote field sites using visible and infrared spectroscopy: Results from the 1999 Marsokhod field test

Upcoming Mars Surveyor lander missions will include extensive spectroscopic capabilities designed to improve interpretations of the mineralogy and geology of landing sites on Mars. The 1999 Marsokhod Field Experiment (MFE) was a Mars rover simulation designed in part to investigate the utility of visible/near-infrared and thermal infrared field spectrometers to contribute to the remote geological exploration of a Mars analog field site in the California Mojave Desert. The experiment simultaneously investigated the abilities of an off-site science team to effectively analyze and acquire useful imaging and spectroscopic data and to communicate efficiently with rover engineers and an on-site field team to provide meaningful input to rover operations and traverse planning. Experiences gained during the MFE regarding effective communication between different mission operation teams will be useful to upcoming Mars mission teams. Field spectra acquired during the MFE mission exhibited features interpreted at the time as indicative of carbonates (both dolomitic and calcitic), mafic rocks and associated weathering products, and silicic rocks with desert varnish-like coatings. The visible/near-infrared spectra also suggested the presence of organic compounds, including chlorophyll in one rock. Postmission laboratory petrologic and spectral analyses of returned samples confirmed that all rocks identified as carbonates using field measurements alone were calc-silicates and that chlorophyll associated with endolithic organisms was present in the one rock for which it was predicted. Rocks classified from field spectra as silicics and weathered mafics were recognized in the laboratory as metamorphosed monzonites and diorite schists. This discrepancy was likely due to rock coatings sampled by the field spectrometers compared to fresh rock interiors analyzed petrographically, in addition to somewhat different surfaces analyzed by laboratory thermal spectroscopy compared to field spectra.

California