Geology ReportsSearch

USGS · ofr20041075

Bedrock geology and mineral resources of the Knoxville 1° x 2° quadrangle, Tennessee, North Carolina, and South Carolina

Abstract

The Knoxville 1°x 2° quadrangle spans the Southern Blue Ridge physiographic province at its widest point from eastern Tennessee across western North Carolina to the northwest corner of South Carolina. The quadrangle also contains small parts of the Valley and Ridge province in Tennessee and the Piedmont province in North and South Carolina. Bedrock in the Valley and Ridge consists of unmetamorphosed, folded and thrust-faulted Paleozoic miogeoclinal sedimentary rocks ranging in age from Cambrian to Mississippian. The Blue Ridge is a complex of stacked thrust sheets divided into three parts: (1) a west flank underlain by rocks of the Late Proterozoic and Early Cambrian Chilhowee Group and slightly metamorphosed Late Proterozoic Ocoee Supergroup west of the Greenbrier fault; (2) a central part containing crystalline basement of Middle Proterozoic age (Grenville), Ocoee Supergroup rocks east of the Greenbrier fault, and rocks of the Murphy belt; and (3) an east flank containing the Helen, Tallulah Falls, and Richard Russell thrust sheets and the amphibolitic basement complex. All of the east flank thrust sheets contain polydeformed and metamorphosed sedimentary and igneous rocks of mostly Proterozoic age. The Blue Ridge is separated by the Brevard fault zone from a large area of rocks of the Inner Piedmont to the east, which contains the Six Mile thrust sheet and the ChaugaWalhalla thrust complex. All of these rocks are also polydeformed and metamorphosed sedimentary and igneous rocks. The Inner Piedmont rocks in this area occupy both the Piedmont and part of the Blue Ridge physiographic provinces. The intensity of deformation and metamorphism increases from west to east in the Blue Ridge. The west flank is mostly chlorite grade or relatively unmetamorphosed, and the central part of the Blue Ridge is mostly staurolite, garnet, or biotite grade, although sillimanite grade rocks occur along the eastern part of the central Blue Ridge in the vicinity of the leading edge of the Hayesvil Ie fault. The east flank of the Blue Ridge and much of the Inner Piedmont are at kyanite or silli manite grade of Manuscript approved for publication February 22, 1991. regional metamorphism except for a zone of retrograde rocks in the Brevard fault zone and a small area of biotite-grade rocks in the extreme southwest part of the Grandfather Mountain window in the northeast corner of the quadrangle. The major mineral resources in the Knoxville 1°x2° quadrangle are construction materials and a variety of industrial minerals mostly related to either granite and pegmatite or ultramafic rocks. Past production in the quadrangle of metals, which are of secondary importance relative to construction materials and industrial minerals, include copper in massive sulfides of the Besshi type, gold-bearing quartz veins, and residual iron and manganese deposits. Resources are discussed in relation to the Valley and Ridge, Blue Ridge, and Piedmont provinces. The following resources are the most important: A. Construction materials: Dimension stone of the Tennessee marble district in the Valley and Ridge. Limestone and dolomite of the Valley and Ridge. Sand and gravel and crushed stone, widespread throughout the quadrangle. B. Industrial minerals: Feldspar, flake mica, and quartz produced by flotation methods from the Spruce Pine Alaskite (muscovite granodiorite) in the east flank of the Blue Ridge. The district produces about half of the U.S. feldspar and significant amounts of the U.S. flake mica. Olivine produced from alpine-type dunite bodies in the east flank of the Blue Ridge. Talc and marble from the Murphy belt in the central part of the Blue Ridge, Vermiculite produced from a large deposit near Tigerville, S.C-, in the Inner Piedmont. Deposit worked out and mine backfilled. Smaller deposits associated with ultramafic rocks in the east flank of the Blue Ridge are now uneconomic and have not been worked in the past 20 years. C. Metals: Copper in three deposits, the Fontana and Hazel Creek mines in the Great Smoky Mountains Abstract Figure 1. Location of the Knoxville 1ºx2º quadrangle, with state and county boundaries National Park in the Central Blue Ridge, and the Cullowhee mine in the east flank of the Blue Ridge. D. Organic fuels: The rocks of the quadrangle contain no coal and probably lie outside the maximum range in thermal maturity permitting the survival of oil. The rocks in the Valley and Ridge and for a short distance eastward below the west flank of the Blue Ridge probably lie within a zone of thermal maturity permitting the survival of natural gas. Consequently the western part of the quadrangle is an area of high risk for hydrocarbon exploration. No exploration drilling has been done in this belt.

Explore related subjects

90° N90° S · 180° W ← longitude → 180° E
Source-reported bounding extent: 35° to 36° latitude; -84° to -82° longitude. This indicates report coverage, not an exact sampling location. View area on OpenStreetMap.

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Gilpin R. Robinson, Frank G. Lesure, J. I. Marlowe, Nora K. Foley, S. H. Clark. 2004. Bedrock geology and mineral resources of the Knoxville 1° x 2° quadrangle, Tennessee, North Carolina, and South Carolina. https://doi.org/10.3133/ofr20041075

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related USGS reports

Estimating aftershock risk for entry into earthquake-damaged buildings

We present a simple method to estimate the risk of experiencing strong shaking from aftershocks during entry into earthquake-damaged buildings. We compute wait times until the probability of strong ground shaking from aftershocks reaches a predefined risk threshold; for example, a 0.4 percent probability of experiencing Modified Mercalli Intensity 7 or greater shaking during the planned building entry. We also develop a relation between aftershock probability and the probability of strong shaking, so that users can reference the U.S. Geological Survey aftershock forecast during an ongoing aftershock sequence to determine if the risk threshold has been met. We apply our method to active continental regions (for example, the Western United States), stable continental regions (for example, the Central and Eastern United States), and subduction zones (for example, Cascadia or Alaska).

Open-File Report

End-user needs for remote sensing wetlands of the Prairie Pothole Region of North America

The Prairie Pothole Region (PPR) of North America comprises globally important grassland and wetland ecosystems critical for numerous populations of migratory birds. Due to the importance of this region for migratory birds, and particularly waterfowl, and the threats of habitat loss due to intensifying agriculture, there is a mature and diverse system of conservation organizations, agencies, and partnerships that spends hundreds of millions of dollars annually on habitat conservation to support migratory bird populations. Remote sensing can be a powerful tool for observing and evaluating global change at large scales as well as expanding inferences from field studies to the broader landscape with statistical models. However, development and utilization of these tools has lagged behind their demand for several reasons, including concerns over spatial and temporal resolution and accuracy of products; perception of a misalignment with decision-maker needs; technological barriers such as skill sets of conservation professionals, computing resources, data access, and usability. In this report, we summarize the needs of conservation professionals and scientists who use or want to use remote sensing data products to inform science about wetland change and conservation of wetlands in the PPR. We assembled this information through several methods leading up to, during, and following a January 2026 PPR Wetland Remote Sensing Workshop. The workshop included United States and Canadian scientists, conservation professionals, and policy experts. Our goal was to bring together end-users and remote sensing product developers jointly to explore reducing the lag between product development and utilization of products to inform science and conservation. Specifically, we aimed to identify gaps in wetland remote sensing that limit effective monitoring, management, and conservation in the PPR, and to develop a framework that outlines pathways to address these gaps by fostering collaboration, improving communication networks, encouraging discussion, and building on existing and ongoing efforts. This report summarizes our participants’ descriptions of end-user needs and the outcomes of the workshop.

Prairie Pothole region

Bathymetric survey and storage capacity of Upper Lake Mary near Flagstaff, Arizona in 2024

The U.S. Geological Survey (USGS), in cooperation with the city of Flagstaff, collected bathymetric, light detection and ranging (lidar), and land-survey data of Upper Lake Mary in Arizona during the months of April and October 2024. The city of Flagstaff uses a combination of groundwater from well fields throughout the Flagstaff area and surface water, mainly from Upper Lake Mary, for its potable water supply. The purpose of the survey is to update previous surveys using new technology and compare the results to previous surveys to determine if there was a decrease in storage capacity that could affect the city’s water supply. The lakebed was mapped in April 2024 using a vessel equipped with a multibeam echosounder (MBES) and mobile lidar scanner with positioning captured using a real-time kinematic global navigation satellite system (RTK GNSS) base and receivers. In October 2024, areas of the reservoir that were too shallow for the boat and shoreline that were not captured by the vessel-based lidar were surveyed on foot using hand-held RTK GNSS receivers. At full pool (spillway elevation of 6,831.82 feet above NAVD 88 [2,082.34 meters (m)], Upper Lake Mary has a storage capacity of 16,449.80 acre-feet (20,290,611.73 cubic meters) and a surface area of 953.57 acres (3,860,926.075 square meters). The reservoir is 5.7 miles (9.7 kilometers) long and varies in width from 326 feet (99.36 m) near the central, narrow portion of the reservoir to 2,613 feet (796.44 m) in the upper portion. Comparisons between this survey and the previous two surveys from the 1950s and 2006 indicate no apparent decrease in reservoir area or storage capacity. Results of the 2024 survey indicate that Upper Lake Mary’s storage capacity increased by 0.9 percent from the 2006 survey and a 1.6 percent increase in surface area from the 2006 survey.

Arizona