Geology ReportsSearch

USGS · 70226939

Granular avalanches across irregular three-dimensional terrain: 2. Experimental tests

Abstract

Scaling considerations indicate that miniature experiments can be used to test models of granular avalanches in which the effects of intergranular fluid and cohesion are negligible. To test predictions of a granular avalanche model described in a companion paper, we performed bench top experiments involving avalanches of dry sand across irregular basal topography that mimicked the complexity of natural terrain. The experiments employed a novel method of laser-assisted cartography to map the three-dimensional morphology of rapidly moving avalanches, thereby providing high-resolution data for comparison with model output. Model input consisted of two material properties (angles of internal and basal Coulomb friction of the sand), which were measured in independent tests, and of initial and boundary conditions that characterized the geometry of the experimental apparatus. Experimental results demonstrate that the model accurately predicts not only the gross behavior but also many details of avalanche motion, from initiation to deposition. We attribute this accuracy to a mathematical and computational formulation that conserves mass and momentum in three-dimensional physical space and satisfies the Coulomb equation in three-dimensional stress space. Our results support the hypothesis that a Coulomb proportionality between shear and normal stresses applies in moderately rapid granular flows and that complicated constitutive postulates are unnecessary if momentum conservation is strictly enforced in continuum avalanche models. Furthermore, predictions of our Coulomb continuum model contrast with those of a Coulomb point mass model, illustrating the importance of multidimensional modeling and model testing.

Explore related subjects

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Richard M. Iverson, Matthew Logan, Roger P. Denlinger. 2004-03-27. Granular avalanches across irregular three-dimensional terrain: 2. Experimental tests. https://doi.org/10.1029/2003jf000084

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related USGS reports

The influence of drying on the aeolian transport of river-sourced sand

Transgression and regression of water levels (stages) have impacted the evolution of aeolian landforms and sedimentary deposits throughout geologic history. We studied this phenomenon over a five-day period of reduced flow on the Colorado River in Grand Canyon National Park, AZ, USA, in March 2021. These transient low flows exposed river-channel sand deposits to the air, causing progressive desiccation (drying) and thereby making these deposits susceptible to aeolian transport. We measured aeolian threshold friction velocities ( u *t ) for sand saltation and PM10 dust emissions, as well as other characteristics, on a subaerially exposed sandbar and downwind aeolian dunefield during each day of the low river flow. The sandbar transitioned from supply-limited to transport-limited aeolian sediment transport conditions during the regression in river water stage. A possible tipping point between the two transport conditions occurred approximately 48 hours after the drop in river flow. The empirically measured u *t decreased as the sandbar sediment dried with increased subaerial exposure time. Theoretical estimates and empirical measurements of u *t corresponded closely on the aeolian dunefield and on the sandbar when it was drier during the third and fourth day of the experiment. Eighty-seven percent of the variability in u *t was explained by empirical models that provide practical estimates of aeolian transport potential of subaerial river sediment deposits using monitoring data that are commonly available in this and other river systems. The work provides theoretical insight into the response of aeolian processes to sediment supply changes driven by periods of anthropogenic activity, drought, and climate change.

Arizona

An eddy-resolving numerical model to study turbulent flow, sediment and bed evolution using detached eddy simulation in a lateral separation zone at the field-scale

Turbulence-resolving simulations elucidate key elements of fluid dynamics and sediment transport in fluvial environments. This research presents a feasible strategy for applying state-of-the-art computational fluid mechanics to the study of sediment transport and morphodynamic processes in lateral separation zones, which are common features in canyon rivers where massive lateral flow separation causes large-scale turbulence that controls sediment erosion and deposition. An eddy-resolving model was developed and tested at the field-scale, coupling a viscous flow and sediment transport solver using Detached Eddy Simulation techniques. A morphodynamic model was applied to the viscous flow/sediment solver to calculate erosion and deposition. A simulation of turbulence was performed at the grid resolution for a straight channel to determine the relative contributions of modeled and resolved diffusivity. The time-dependent, energetically important, correlative, non-stationary signals of the simulated quantities were captured at the lateral separation zone. Strong periodic signals featured by high amplitude were found at the separation zone, while low frequency pulsations were observed at the reattachment zone of the lateral separation zone. Interactions between the eddies and the loose bed boundaries resulted in erosion of sediment at the main channel followed by deposition at the primary eddy and eddy bars. tions elucidate key elements of fluid dynamics and sediment transport in fluvial environments. This research presents a feasible strategy for applying state-of-the-art computational fluid mechanics to the study of sediment transport and morphodynamic processes in lateral separation zones, which are common features in canyon rivers where massive lateral flow separation causes large-scale turbulence that controls sediment erosion and deposition. An eddy-resolving model was developed and tested at the field scale, coupling viscous flow and sediment transport solver using Detached Eddy Simulation (DES) techniques. A morphodynamic model was applied to the viscous flow/sediment solver to calculate erosion and deposition. A simulation of turbulence was performed at the grid resolution for a straight channel to determine the relative contributions of modeled and resolved diffusivity. The time-dependent, energetically important, correlative non-stationary signals of the simulated quantities were captured at the lateral separation zone. Strong periodic signals featured by high amplitude were found at the separation zone, while low frequency pulsations were observed at the reattachment zone of the lateral separation zone. Interactions between the eddies and the loose bed boundaries resulted in massive erosion of sediment at the main channel followed by deposition at the primary eddy and eddy bars.

Arizona

Self-limitation of sand storage in a bedrock-canyon river arising from the interaction of flow and grain size

Bedrock-canyon rivers tend to be supply limited because they are efficient transporters of sediment and not because the upstream supply of sediment is small. A byproduct of this supply limitation is that the finer alluvium stored in these rivers has shorter residence times and smaller volumes than in alluvial rivers. To improve our understanding of disequilibrium sediment transport and its effect on sand storage in bedrock-canyon rivers, we undertook a 20-year study, synthesized herein, of the Colorado River in Grand Canyon. Despite the large loads for which it was renowned, this river exhibited evidence of natural sand-supply limitation and became the perfect natural laboratory for studying sand transport in a bedrock canyon after upstream dam construction exacerbated this supply limitation. During our study, we made and analyzed an unprecedented ∼2.5 million measurements of the suspended and bed sediment. Results indicate that sand storage in this bedrock-canyon river is self-limiting owing to the physical controls of flow and grain size causing negative feedbacks that likely also operate in other bedrock-canyon rivers. Following episodic tributary floods that supply finer sand, sand migrates quickly downstream in the form of a wave in which large systematic changes in bed-sand grain size occur. These grain-size changes cause discharge-independent systematic changes in suspended-sand concentration in excess of a factor of 20. Although the tributary supply of sand increases the amount of sand storage, it also greatly increases the downstream sand transport by causing bed-sand fining, thus limiting the residence time and volume of sand storage.

Arizona