The influence of drying on the aeolian transport of river-sourced sand

Joel B. Sankey; Joshua Caster; Alan Kasprak; Helen C. Fairley

doi:10.1029/2022jf006816

Home/Archive/USGS

USGS · 70238613

The influence of drying on the aeolian transport of river-sourced sand

Joel B. Sankey·Joshua Caster·Alan Kasprak·Helen C. Fairley

View original source ↗Export metadata ↓

Abstract

Transgression and regression of water levels (stages) have impacted the evolution of aeolian landforms and sedimentary deposits throughout geologic history. We studied this phenomenon over a five-day period of reduced flow on the Colorado River in Grand Canyon National Park, AZ, USA, in March 2021. These transient low flows exposed river-channel sand deposits to the air, causing progressive desiccation (drying) and thereby making these deposits susceptible to aeolian transport. We measured aeolian threshold friction velocities ( u *t ) for sand saltation and PM10 dust emissions, as well as other characteristics, on a subaerially exposed sandbar and downwind aeolian dunefield during each day of the low river flow. The sandbar transitioned from supply-limited to transport-limited aeolian sediment transport conditions during the regression in river water stage. A possible tipping point between the two transport conditions occurred approximately 48 hours after the drop in river flow. The empirically measured u *t decreased as the sandbar sediment dried with increased subaerial exposure time. Theoretical estimates and empirical measurements of u *t corresponded closely on the aeolian dunefield and on the sandbar when it was drier during the third and fourth day of the experiment. Eighty-seven percent of the variability in u *t was explained by empirical models that provide practical estimates of aeolian transport potential of subaerial river sediment deposits using monitoring data that are commonly available in this and other river systems. The work provides theoretical insight into the response of aeolian processes to sediment supply changes driven by periods of anthropogenic activity, drought, and climate change.

Explore related subjects

Journal of Geophysical Research Earth Surface Article

Source-reported bounding extent: 35.544550609550456° to 36.965267960408156° latitude; -114.03110966943333° to -111.35659478532732° longitude. This indicates report coverage, not an exact sampling location. View area on OpenStreetMap.

Keep this discovery

Explore connections, maps & timelines

BibTeX RIS

Joel B. Sankey, Joshua Caster, Alan Kasprak, Helen C. Fairley. 2022-12-13. The influence of drying on the aeolian transport of river-sourced sand. https://doi.org/10.1029/2022jf006816

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related USGS reports

USGS2021

An eddy-resolving numerical model to study turbulent flow, sediment and bed evolution using detached eddy simulation in a lateral separation zone at the field-scale

Turbulence-resolving simulations elucidate key elements of fluid dynamics and sediment transport in fluvial environments. This research presents a feasible strategy for applying state-of-the-art computational fluid mechanics to the study of sediment transport and morphodynamic processes in lateral separation zones, which are common features in canyon rivers where massive lateral flow separation causes large-scale turbulence that controls sediment erosion and deposition. An eddy-resolving model was developed and tested at the field-scale, coupling a viscous flow and sediment transport solver using Detached Eddy Simulation techniques. A morphodynamic model was applied to the viscous flow/sediment solver to calculate erosion and deposition. A simulation of turbulence was performed at the grid resolution for a straight channel to determine the relative contributions of modeled and resolved diffusivity. The time-dependent, energetically important, correlative, non-stationary signals of the simulated quantities were captured at the lateral separation zone. Strong periodic signals featured by high amplitude were found at the separation zone, while low frequency pulsations were observed at the reattachment zone of the lateral separation zone. Interactions between the eddies and the loose bed boundaries resulted in erosion of sediment at the main channel followed by deposition at the primary eddy and eddy bars. tions elucidate key elements of fluid dynamics and sediment transport in fluvial environments. This research presents a feasible strategy for applying state-of-the-art computational fluid mechanics to the study of sediment transport and morphodynamic processes in lateral separation zones, which are common features in canyon rivers where massive lateral flow separation causes large-scale turbulence that controls sediment erosion and deposition. An eddy-resolving model was developed and tested at the field scale, coupling viscous flow and sediment transport solver using Detached Eddy Simulation (DES) techniques. A morphodynamic model was applied to the viscous flow/sediment solver to calculate erosion and deposition. A simulation of turbulence was performed at the grid resolution for a straight channel to determine the relative contributions of modeled and resolved diffusivity. The time-dependent, energetically important, correlative non-stationary signals of the simulated quantities were captured at the lateral separation zone. Strong periodic signals featured by high amplitude were found at the separation zone, while low frequency pulsations were observed at the reattachment zone of the lateral separation zone. Interactions between the eddies and the loose bed boundaries resulted in massive erosion of sediment at the main channel followed by deposition at the primary eddy and eddy bars.

Arizona↗

USGS2021

Self-limitation of sand storage in a bedrock-canyon river arising from the interaction of flow and grain size

Bedrock-canyon rivers tend to be supply limited because they are efficient transporters of sediment and not because the upstream supply of sediment is small. A byproduct of this supply limitation is that the finer alluvium stored in these rivers has shorter residence times and smaller volumes than in alluvial rivers. To improve our understanding of disequilibrium sediment transport and its effect on sand storage in bedrock-canyon rivers, we undertook a 20-year study, synthesized herein, of the Colorado River in Grand Canyon. Despite the large loads for which it was renowned, this river exhibited evidence of natural sand-supply limitation and became the perfect natural laboratory for studying sand transport in a bedrock canyon after upstream dam construction exacerbated this supply limitation. During our study, we made and analyzed an unprecedented ∼2.5 million measurements of the suspended and bed sediment. Results indicate that sand storage in this bedrock-canyon river is self-limiting owing to the physical controls of flow and grain size causing negative feedbacks that likely also operate in other bedrock-canyon rivers. Following episodic tributary floods that supply finer sand, sand migrates quickly downstream in the form of a wave in which large systematic changes in bed-sand grain size occur. These grain-size changes cause discharge-independent systematic changes in suspended-sand concentration in excess of a factor of 20. Although the tributary supply of sand increases the amount of sand storage, it also greatly increases the downstream sand transport by causing bed-sand fining, thus limiting the residence time and volume of sand storage.

Arizona↗

USGS2020

Measuring basal force fluctuations of debris flows using seismic recordings and empirical green's functions

We present a novel method for measuring the fluctuating basal normal and shear stresses of debris flows by using along‐channel seismic recordings. Our method couples a simple parameterization of a debris flow as a seismic source with direct measurements of seismic path effects using empirical Green's functions generated with a force hammer. We test this method using two large‐scale (8 and 10 m 3 ) experimental flows at the U.S. Geological Survey debris‐flow flume that were recorded by dozens of three‐component seismic sensors. The seismically derived basal stress fluctuations compare well in amplitude and timing to independent force plate measurements within the valid frequency range (15–50 Hz). We show that although the high‐frequency seismic signals provide band‐limited forcing information, there are systematic relations between the fluctuating stresses and independently measured flow properties, especially mean basal shear stress and flow thickness. However, none of the relationships are simple, and since the flow properties also correlate with one another, we cannot isolate a single factor that relates in a simple way to the fluctuating forces. Nevertheless, our observations, most notably the gradually declining ratio of fluctuating to mean basal stresses during flow passage and the distinctive behavior of the coarse, unsaturated flow front, imply that flow style may be a primary control on the conversion of translational to vibrational kinetic energy. This conversion ultimately controls the radiation of high‐frequency seismic waves. Thus, flow style may provide the key to revealing the nature of the relationship between fluctuating forces and other flow properties.

Journal of Geophysical Research Earth Surface↗