Geology topics

Research about Kīlauea volcano

Source-linked reports with geographic coverage including Kīlauea volcano.

35 records · Page 2Linked to original sources

USGS2020

Seismic velocity variations associated with the 2018 lower East Rift Zone eruption of Kīlauea, Hawaiʻi

The 2018 lower East Rift Zone eruption of Kīlauea (Hawai‘i) marked a dramatic change in the volcano’s 35-year-long rift zone eruption. The collapse of the middle East Rift Zone vent Pu‘u ‘Ō‘ō was followed by one of the volcano’s most voluminous eruptions in 500 years. Over the course of this 3-month eruption, the draining of summit-stored magma led to near-daily collapses of a portion of the caldera and ultimately up to 500 m of summit subsidence. While deformation data indicated that the summit and middle East Rift Zone were inflating for the previous several years, why Pu‘u ‘Ō‘ō collapsed and what initiated down-rift dike propagation remains unclear. Using ambient noise seismic interferometry, we show that a Ml5.3 decollement earthquake beneath Kīlauea’s south flank in June 2017 induced a coseismic decrease of up to 0.30% in seismic velocity throughout the volcano. This velocity decrease may have been caused by dynamic stress–induced shallow crustal fracture, i.e., weakening to dilatant crack growth, and was greatest near Pu‘u ‘Ō‘ō. Additionally, we verify a pre-eruptive increase in seismic velocity, consistent with increasing pressurization in the volcano’s shallow summit magma reservoir. This velocity increase occurred coincident with the first in a series of lower-crustal earthquake swarms, 6 days before a 2-month period of rapid summit and middle East Rift Zone inflation. The increase in up-rift magma-static pressure, combined with the pre-existing weakness from the June 2017 earthquake, may have facilitated down-rift dike propagation and the devastating 2018 eruption.

Hawaii↗

USGS2020

Spatiotemporal seismic structure variations associated with the 2018 Kīlauea eruption based on temporary dense geophone arrays

During the 2018 Kīlauea volcanic eruption, lava erupted from a series of new fissures in the lower East Rift Zone more than 30 km away from the summit through a dike intrusion. Between late May and early August, variations in the effusion rate at the persistent eruptive vent (Fissure 8) were observed following near‐daily summit caldera collapse events. Targeting the ongoing eruptive activity and the subsurface magma movement, we deployed a temporary dense seismic array. The observed time‐lapse changes in seismic velocity associated with the response of the summit collapse in three areas are presented in this study. The results show (1) clear spatially dependent co‐collapse velocity reductions across the newly‐intruded dike structure, (2) a gradual post‐collapse velocity increase near Fissure 8 correlated with the surge of magma supply, and (3) a gradual post‐collapse velocity increase on the summit likely associated with reservoir pressurization and crustal welding.

Hawaii↗

USGS2020

Spatial and temporal variations in SO2 and PM2.5 levels around Kīlauea volcano, Hawai'i during 2007–2018

Among the hazards posed by volcanoes are the emissions of gases and particles that can affect air quality and damage agriculture and infrastructure. A recent intense episode of volcanic degassing associated with severe impacts on air quality accompanied the 2018 lower East Rift Zone (LERZ) eruption of Kīlauea volcano, Hawai'i. This resulted in a major increase in gas emission rates with respect to usual emission values for this volcano, along with a shift in the source of the dominant plume to a populated area on the lower flank of the volcano. This led to reduced air quality in downwind communities. We analyse open-access data from the permanent air quality monitoring networks operated by the Hawai'i Department of Health (HDOH) and National Park Service (NPS), and report on measurements of atmospheric sulfur dioxide (SO 2 ) between 2007 and 2018 and PM 2.5 (aerosol particulate matter with diameter <2.5 μm) between 2010 and 2018. Additional air quality data were collected through a community-operated network of low-cost PM 2.5 sensors during the 2018 LERZ eruption. From 2007 to 2018 the two most significant escalations in Kīlauea's volcanic emissions were: the summit eruption that began in 2008 (Kīlauea emissions averaged 5–6 kt/day SO 2 from 2008 until summit activity decreased in May 2018) and the LERZ eruption in 2018 when SO 2 emission rates reached a monthly average of 200 kt/day during June. In this paper we focus on characterizing the airborne pollutants arising from the 2018 LERZ eruption and the spatial distribution and severity of volcanic air pollution events across the Island of Hawai'i. The LERZ eruption caused the most frequent and severe exceedances of the Environmental Protection Agency (EPA) PM 2.5 air quality threshold (35 μg/m 3 as a daily average) in Hawai'i in the period 2010–2018. In Kona, for example, the maximum 24-h-mean mass concentration of PM 2.5 was recorded as 59 μg/m 3 on the twenty-ninth of May 2018, which was one of eight recorded exceedances of the EPA air quality threshold during the 2018 LERZ eruption, where there had been no exceedances in the previous 8 years as measured by the HDOH and NPS networks. SO 2 air pollution during the LERZ eruption was most severe in communities in the south and west of the island, as measured by selected HDOH and NPS stations in this study, with a maximum 24-h-mean mass concentration of 728 μg/m 3 recorded in Ocean View (100 km west of the LERZ emission source) in May 2018. Data from the low-cost sensor network correlated well with data from the HDOH PM 2.5 instruments, confirming that these low-cost sensors provide a robust means to augment reference-grade instrument networks.

Hawaii↗

USGS2020

Two ensemble approaches for forecasting sulfur dioxide concentrations from Kīlauea volcano

Kīlauea volcano, located on the island of Hawaii, is one of the most active volcanoes in the world. It was in a state of nearly continuous eruption from 1983 to 2018 with copious emissions of sulfur dioxide (SO 2 ) that affected public health, agriculture, and infrastructure over large portions of the island. Since 2010, the University of Hawaiʻi at Mānoa provides publicly available vog forecasts that began in 2010 to aid in the mitigation of volcanic smog (or “vog”) as a hazard. In September 2017, the forecast system began to produce operational ensemble forecasts. The months that preceded Kīlauea’s historic lower east rift zone eruption of 2018 provide an opportunity to evaluate the newly implemented air quality ensemble prediction system and compare it another approach to the generation of ensemble members. One of the two approaches generates perturbations in the wind field while the other perturbs the sulfur dioxide (SO 2 ) emission rate from the volcano. This comparison has implications for the limits of forecast predictability under the particularly dynamic conditions at Kīlauea volcano. We show that for ensemble forecasts of SO 2 generated under these conditions, the uncertainty associated with the SO 2 emission rate approaches that of the uncertainty in the wind field. However, the inclusion of a fluctuating SO 2 emission rate has the potential to improve the prediction of the changes in air quality downwind of the volcano with suitable postprocessing.

Hawaii↗

USGS2019

Post-collapse gravity increase at the summit of Kīlauea Volcano, Hawaiʻi

We conducted gravity surveys of the summit area of Kīlauea Volcano, Hawaiʻi, in November 2018 and March 2019, with the goal of determining whether there was any mass change at depth following the volcano's May–August 2018 caldera collapse. Surface deformation between the two surveys was minimal, but we measured a gravity increase (maximum 44 μGal) centered on the caldera that can be modeled as mass accumulation in a region ~1 km beneath the surface. We interpret this mass increase to be mostly magma accumulation in void space that was created during the summit collapse. Caldera uplift was evident by April 2019, indicating that the magma volume had reached a point where pressurization could be sustained. Modeled gravity change suggests a maximum magma storage rate at Kīlauea's summit during November 2018 to March 2019 that is much less than the pre‐2018 magma supply rate to the volcano.

Hawaii↗

USGS2019

Undocumented late 18th- to early 19th-century volcanic eruptions in the Southwest Rift Zone of Kīlauea Volcano, Hawai‘i

The historical record of volcanic activity at Kīlauea Volcano on the Island of Hawaiʻi begins with the phreatomagmatic blasts of 1790. Three decades later, in 1823, the first party of non-Hawaiian visitors, organized by the English Reverend William Ellis, reached Kīlauea’s summit. A detailed narrative by Ellis includes an account of an eruption in Kīlauea’s Southwest Rift Zone that occurred shortly before his visit. In the absence of other source materials, the interval between the eruptions of 1790 and 1823 has been overlooked by geologists working at Kīlauea, with the presumption that little if anything took place volcanically outside of the summit caldera during that time. Careful stratigraphic observations combined with radiocarbon dating demonstrate that during these years a set of Southwest Rift Zone eruptions took place, including two that were long-lasting (weeks to months). Inclusion of these events gives a more complete historical (post-1790) record for Kīlauea and a better understanding of its eruptive behavior.

Hawaii↗

USGS2019

Controls on lava lake level at Halema‘uma‘u Crater, Kīlauea Volcano

The height of the lava column is a fundamental measure of open-vent volcanic activity, but little continuous long-term data exist to understand this parameter. The recent (2008-2018) lava lake activity at the summit of Kīlauea Volcano provides a unique opportunity to track and understand the processes that control lava level over timescales ranging from minutes to years. We review recently published data as well as analyze the long-term record of lava level at Kīlauea’s summit during 2009-2017. Longer timescale fluctuations, over days to months, have a strong positive linear correlation with ground deformation, suggesting they reflect pressure changes in the summit magma reservoir. Shorter timescale fluctuations, over minutes to hours, have an inverse relationship with spattering (i.e. outgassing) intensity at the lake surface – increased outgassing lowers the lake level and vice versa. Our analysis of the long-term lava level data thus confirms that lava level at Halemaʻumaʻu is controlled by these two types of processes: 1) those related to magma reservoir pressure changes (such as magma supply rate) and 2) shallow outgassing fluctuations (such as gas pistoning). Frequency filtering can isolate pressure- and outgassing-driven components of lava level change. Time series analysis indicates that there was no large, persistent periodicity in the lava level; a minor fortnightly oscillation might be related to Earth tides but was not continuously present. The remarkable correlation between lava level and deformation of the summit indicates that the lava lake acts as a reliable “piezometer”; tracking lava level over time may thus provide an indication of flank eruptive potential. We show that long-term interdisciplinary monitoring is necessary to discriminate the processes that control lava level.

Hawaii↗

USGS2019

Eruption and fountaining dynamics of selected 1985–1986 high fountaining episodes at Kīlauea volcano, Hawai'i, from quantitative vesicle microtexture analysis

Tephra from the early Hawaiian fountaining episodes of the ongoing eruption of Pu'u 'Ō'ō in the East Rift Zone (ERZ) of Kīlauea provides an opportunity to study the vesicle microtextures of pyroclasts erupted from a single vent over a prolonged period of time. We report the results of microtextural analysis of pyroclasts from five of Pu'u 'Ō'ō's high (>200 m) Hawaiian fountaining episodes (episodes 32, 37, 40, 44 and 45) erupted during 1985–1986. This analysis was carried out to constrain the parameters that led to large variations in fountain height at Pu'u 'Ō'o, and the extent to which pyroclast residence times in the fountain modified microtextures. Our results confirm the finding of Stovall et al., 2011 , Stovall et al., 2012 that pyroclasts from a single Hawaiian fountain can vary greatly in texture (from bubbly to foamy), and have vesicle volume densities (N m v ) and vesicle to melt ratios (V G /V L ) that vary by an order of magnitude. This range in vesicle texture and population is due to extensive growth and coalescence of vesicles within the fountain after fragmentation. Only one pyroclast from four of five episodes was found to have textures interpreted as indicative of the vesicle population near the moment of fragmentation: bubbly texture, high density (typically >500 kg m −3 ), high N m v (2.2 × 10 6 to 4.4 × 10 6 ), and low V G /V L of 2.06 to 4.65. We demonstrate a linear correlation between Δ(V G /V L ) and peak fountain height across a range of Hawaiian fountains from Kilauea. This correlation could be used to infer peak heights of unobserved Hawaiian fountaining eruptions after further testing using well-recorded events.

Hawai'i↗

USGS2019

Cyclic lava effusion during the 2018 eruption of Kīlauea Volcano

Lava flows present a recurring threat to communities on active volcanoes, and volumetric eruption rate is one of the primary factors controlling flow behavior and hazard. The timescales and driving forces of eruption rate variability, however, remain poorly understood. In 2018, a highly destructive eruption occurred on the lower flank of Kīlauea Volcano, Hawaiʻi, where the primary vent exhibited dramatic cyclic eruption rates on both short (minutes) and long (tens of hours) timescales. We use multiparameter data to show that the short cycles were driven by shallow outgassing, while longer cycles were pressure-driven surges in magma supply triggered by summit caldera collapse events 40 km upslope. The results provide a clear link between eruption rate fluctuations and their driving processes in the magmatic system.

Hawaii↗

USGS2019

Magma reservoir failure and the onset of caldera collapse at Kīlauea volcano in 2018

Caldera-forming eruptions are among Earths most hazardous natural phenomena, yet the architecture of subcaldera magma reservoirs and the conditions that trigger collapse are poorly understood. Observations from the formation of a 0.8cubic kilometer basaltic caldera at Klauea Volcano in 2018 included the draining of an active lava lake, which provided a window into pressure decrease in the reservoir. We show that failure began after <4% of magma was withdrawn from a shallow reservoir beneath the volcanos summit, reducing its internal pressure by ~17 megapascals. Several cubic kilometers of magma were stored in the reservoir, and only a fraction was withdrawn before the end of the eruption. Thus, caldera formation may begin after withdrawal of only small amounts of magma and may end before source reservoirs are completely evacuated.

Hawaii↗

USGS2019

Products, processes, and implications of Keanakāko‘i volcanism, Kīlauea Volcano, Hawai‘i

The Keanakāko‘i Tephra offers an exceptional window into the explosive portion of Kīlauea’s recent past. Once thought to be the products of a single eruption, the deposits instead formed through a wide range of pyroclastic activity during an ~300 yr period following the collapse of the modern caldera in ca. 1500 CE. No single shallow conduit or vent system prevailed during this period, and most of the deposits are confined to distinct sectors around the caldera. Vent position shifted abruptly and repeatedly throughout this time period. This combination of circumstances, influenced by prevailing wind direction, led to rapid lateral changes in the stratigraphy. We define and describe 12 units, several of which are subdivided into subunits or beds, and place them in a framework that reflects volcanologic processes as well as temporal succession.

Hawaii↗

USGS2018

Eruptions in sync: Improved constraints on Kīlauea Volcano's hydraulic connection

Kīlauea Volcano is an archetype for the complex interactions that can occur between a volcano’s summit and flanks. Decades of monitoring at Kīlauea have demonstrated that magma rises beneath the summit and flows laterally at shallow depths to erupt along the rift zones. Kīlauea’s recent eruptions at Halema‘uma‘u and Pu‘u ‘Ō‘ō mark the first time in the historic record that long-term (>1 year) eruptions have been concurrent at the summit and a rift zone, offering a new opportunity to improve our understanding of the relationship between these two segments of the magmatic system. While magma supply rate beneath the summit has been shown in previous studies to be a primary control on magmatic system pressure and eruptive activity, the role of the eruptive vent has been less clear. Our study shows that a dynamic equilibrium is maintained between Kīlauea’s summit and East Rift Zone (ERZ) eruptive vent—and lava lake level fluctuations are closely coupled at the two eruption sites—providing new constraints on the hydraulic connection and ERZ conduit. We show that localized changes at the ERZ eruption site during 2010-2011 regulated summit behavior in an uprift direction over distances of ~20 km. Changes in the elevation and efficiency of the ERZ vent affect pressure in Kīlauea’s magmatic system and impact summit behavior. Thus, the hydraulic connection between the summit and rift zone is a “two-way street” that transmits both downrift- and uprift-directed changes. Our results support recent work at other volcanoes that shows a complex interplay between a volcano’s summit reservoir and flank conduit during flank eruptions, and suggest that explosive summit activity may in some cases be triggered by changes far away on a volcano’s rift.

Hawaii↗

USGS2017

Partitioning of pyroclasts between ballistic transport and a convective plume: Kīlauea volcano, 19 March 2008

We describe the discrete ballistic and wind-advected products of a small, but exceptionally well-characterized, explosive eruption of wall-rock-derived pyroclasts from Kīlauea volcano on 19 March 2008 and, for the first time, integrate the size distribution of the two subpopulations to reconstruct the true size distribution of a population of pyroclasts as it exited from the vent. Based on thinning and fining relationships, the wind-advected fraction had a mass of 6.1 × 10 5 kg and a thickness half distance of 110 m, placing it at the bottom end of the magnitude and intensity spectra of pyroclastic falls. The ballistic population was mapped, in the field and by using structure-from-motion techniques, to a diameter of > 10–20 cm over an area of ~0.1 km 2 , with an estimated mass of 1 × 10 5 kg. Initial ejection velocities of 50–80 m/s were estimated from inversion of isopleths. The total grain size distribution was estimated by using a mass partitioning of 98% of wind-advected material and 2% of ballistics, resulting in median and sorting values of −1.7 ϕ and 3.1 ϕ . It is markedly broader than those calculated for the products of magmatic explosive eruptions, because the grain size of 19 March 2008 clast population is unrelated to a volcanic fragmentation event and instead was “inherited” from a population of talus clasts that temporary blocked the vent prior to the eruption. Despite a conspicuous near-field presence, the ballistic subpopulation has only a minor influence on the grain size distribution because of its rapid thinning and fining away from source.

Hawaii↗

USGS2016

Magma decompression rates during explosive eruptions of Kīlauea volcano, Hawaii, recorded by melt embayments

The decompression rate of magma as it ascends during volcanic eruptions is an important but poorly constrained parameter that controls many of the processes that influence eruptive behavior. In this study, we quantify decompression rates for basaltic magmas using volatile diffusion in olivine-hosted melt tubes (embayments) for three contrasting eruptions of Kīlauea volcano, Hawaii. Incomplete exsolution of H 2 O, CO 2 , and S from the embayment melts during eruptive ascent creates diffusion profiles that can be measured using microanalytical techniques, and then modeled to infer the average decompression rate. We obtain average rates of ~0.05–0.45 MPa s −1 for eruptions ranging from Hawaiian style fountains to basaltic subplinian, with the more intense eruptions having higher rates. The ascent timescales for these magmas vary from around ~5 to ~36 min from depths of ~2 to ~4 km, respectively. Decompression-exsolution models based on the embayment data also allow for an estimate of the mass fraction of pre-existing exsolved volatiles within the magma body. In the eruptions studied, this varies from 0.1 to 3.2 wt% but does not appear to be the key control on eruptive intensity. Our results do not support a direct link between the concentration of pre-eruptive volatiles and eruptive intensity; rather, they suggest that for these eruptions, decompression rates are proportional to independent estimates of mass discharge rate. Although the intensity of eruptions is defined by the discharge rate, based on the currently available dataset of embayment analyses, it does not appear to scale linearly with average decompression rate. This study demonstrates the utility of the embayment method for providing quantitative constraints on magma ascent during explosive basaltic eruptions.

Hawaii↗

USGS2016

Thermal mapping of a pahoehoe lava flow, Kilauea Volcano

Pāhoehoe lava flows are a major component of Hawaiian eruptive activity, and an important part of basaltic volcanism worldwide. In recent years, pāhoehoe lava has destroyed homes and threatened parts of Hawai‘i with inundation and disruption. In this study, we use oblique helicopter-borne thermal images to create high spatial resolution (~1 m) georeferenced thermal maps of the active pāhoehoe flow on Kīlauea Volcano’s East Rift Zone. Thermal maps were created on 27 days during 2014–2016 in the course of operational monitoring, encompassing a phase of activity that threatened the town of Pāhoa. Our results illustrate and reinforce how pāhoehoe flows are multicomponent systems consisting of the vent, master tube, distributary tubes and surface breakouts. The thermal maps accurately depict the distribution and character of pāhoehoe breakouts through time, and also delineate the subsurface lava tube. Surface breakouts were distributed widely across the pāhoehoe flow, with significant portions concurrently active well upslope of the flow front, often concentrated in clusters of activity that evolved through time. Gradual changes to surface breakout distribution and migration relate to intrinsic processes in the flow, including the slow evolution of the distributary tube system. Abrupt disruptions to this system, and the creation of new breakouts (and associated hazards), were triggered by extrinsic forcing—namely fluctuations in lava supply rate at the vent which disrupted the master lava tube. Although the total area of a pāhoehoe flow has been suggested to relate to effusion rate, our results show that changes in the proportion of expansion vs. overplating can complicate this relationship. By modifying existing techniques, we estimate time-averaged discharge rates for the flow during 2014–2016 generally in the range of 1–2 m3 s-1 (mean: 1.3±0.4 m3 s-1) – less than half of Kīlauea’s typical eruption rate on the East Rift Zone and suggestive of a weak eruptive regime during 2014–2016. We caution, however, that this discharge rate approach requires further independent corroboration. The thermal maps provide the first synoptic characterization of pāhoehoe flow activity at high spatial resolution, essential both for operational hazard assessment and fundamental understanding of pāhoehoe behavior.

Hawaii↗

USGS2015

Crustal stress and structure at Kīlauea Volcano inferred from seismic anisotropy

Seismic anisotropy, measured through shear wave splitting (SWS) analysis, can be indicative of the state of stress in Earth's crust. Changes in SWS at Kīlauea Volcano, Hawai‘i, associated with the onset of summit eruptive activity in 2008 hint at the potential of the technique for tracking volcanic activity. To use SWS observations as a monitoring tool, however, it is important to understand the cause of seismic anisotropy at the volcano throughout the eruptive cycle. To address this need, we analyzed SWS results from across Kīlauea in combination with macroscopic surface structures (mapped fractures, faults, and fissures) and stress orientations inferred from fault plane solutions. Seismic anisotropy seems to be due to pervasive aligned structures in most regions of the volcano. The upper East and Southwest Rift Zones, however, show a bimodality in stress and SWS, suggesting a stress discontinuity with depth, perhaps related to magma conduits that trend obliquely to the dominant structure. Other areas in and around Kīlauea Caldera display principal stresses of similar magnitudes, indicating that small stress perturbations can rotate the maximum horizontal compressive stress direction by up to 90 ° . In these locations, static structures generally control SWS, but dynamic conditions due to magmatic activity can override the structural control. Monitoring of SWS may therefore provide important signs of impending volcanism.

Hawaii↗

USGS2015

Primative components, crustal assimilation, and magmatic degassing of the 2008 Kilauea summit eruption

Simultaneous summit and rift zone eruptions at Kīlauea starting in 2008 reflect a shallow eruptive plumbing system inundated by a bourgeoning supply of new magma from depth. Olivine-hosted melt inclusions, host glass, and bulk lava compositions of magma erupted at both the summit and east rift zone demonstrate chemical continuity at both ends of a well-worn summit-to-rift pipeline. Analysis of glass within dense-cored lapilli erupted from the summit in March – August 2008 show these are not samplings of compositionally distinct magmas stored in the shallow summit magma reservoir, but instead result from remelting and assimilation of fragments from conduit wall and vent blocks. Summit pyroclasts show the predominant and most primitive component erupted to be a homogenous, relatively trace-element-depleted melt that is a compositionally indistinguishable from east rift lava. Based on a “top-down” model for the geochemical variation in east rift zone lava over the past 30 years, we suggest that the apparent absence of a 1982 enriched component in melt inclusions, as well as the proposed summit-rift zone connectivity based on sulfur and mineral chemistry, indicate that the last of the pre-1983 magma has been flushed out of the summit reservoir during the surge of mantle-derived magma from 2003-2007.

Hawaii↗