Geology topics

Research about Kīlauea volcano

Source-linked reports with geographic coverage including Kīlauea volcano.

At least 19 recordsLinked to original sources

USGS2026

Storage timescales and the crystal growth history recorded in the layered reservoir of the Unit 3 Kulanaokuaiki Tephra Member of the Uēkahuna Ash from Kīlauea volcano

The Kulanaokuaiki Tephra Unit 3 (900 C.E.) was a subplinian basaltic scoria eruption, the largest known to have occurred at Kīlauea’s summit. The initiation mechanism and cause(s) of this highly hazardous eruption remain poorly understood, particularly as this style of activity has not been observed in the modern period. We use olivine diffusion timescales from Fe-Mg and lithium zoning to assess magma storage timescales and evaluate evidence for mixing prior to eruption. Of the 200 crystals assessed, 55% are normally zoned for forsterite and 45% are non-zoned. Zoned crystals (> 1 mm) ( n = 96) have average compositions of Fo 89 cores and Fo 81 rims, while small crystals 0.5–1 mm ( n = 14) have Fo 85 cores and Fo 82 rims. Modeled Fo diffusion timescales range from < 1 to 12.6 years (median of 3.0 years). Lithium maps in 32 of the forsterite-zoned crystals reveal a variety of lithium zoning types, most of which we attribute to crystal growth. Many lithium profiles are coupled to phosphorus within the outer ~ 100 μm of the crystal ( n = 17), reflecting growth processes and precluding their use for diffusion studies. Overall, our Unit 3 olivine dataset displays no evidence of magmatic priming shortly prior to eruption, unlike prior observations for the basaltic subplinian eruption of the Keanakāko‘i Tephra Unit E (1650 C.E.). Thus, explosive eruption magmas may be stored for considerably longer than previously thought, and magmatic priming is not a necessary precursor for Kīlauea’s explosive eruptions. We hypothesize that gas-driven filter pressing from crystallization of microlites and macrocrysts in the reservoir slurry contributed to the explosivity of the Unit 3 eruption.

Hawaii↗

USGS2026

Magmatic source of the opening phase of Kīlauea’s 2018 Lower East Rift Zone eruption

The 2018 eruption of Kīlauea volcano in its Lower East Rift Zone began with the discharge of evolved high-Ti basalt as weak lava fountains and short, slow-moving lava flows. The lavas were quickly geochemically recognized as being derived from magmas stored within the rift zone and remobilized by a new intrusion, a sequence that is common at Kīlauea. This initial phase of the 2018 eruption, referred to as phase 1a, lasted for 6 days and was followed by extrusion of mixed magma after a 3-day pause. Even though remobilization of older rift zone magmas is common within Kīlauea’s rift zones, it is difficult to determine which past intrusion(s) may have initially emplaced those stored magmas. This difficulty stems from the tendency for Kīlauea magmas to follow very similar differentiation paths without significant variations in major, minor, or even trace element chemistry. We investigate possible magma sources for the lavas erupted during phase 1a of the 2018 eruption using whole-rock, mineral, and glass major and trace element compositions from historical East Rift Zone eruptions with adjacent fissures. We consider two primary hypotheses for the phase 1a source: magmas associated with the 1955 Lower East Rift Zone eruption or the nine eruptions in the Middle and Upper East Rift Zone during the 1960s. Our results suggest that magma associated with the earliest phases of Kīlauea’s 1955 eruption was the most likely source of the 2018 phase 1a remobilized magma. We determine volatile saturation pressures from melt inclusion chemistry and find similar storage depths for the 2018 phase 1a and early 1955 magmas. The phase 1a and early 1955 lavas are nearly indistinguishable in all of the compositional criteria considered, implying that the leftover 1955 magma body barely cooled and differentiated in the 63 years between eruptions (cooling rates of ~0.1 °C/year). This study sheds light on the potential for protracted storage of eruptible magmas in rift zones at Kīlauea, and highlights some of the challenges and solutions to identifying genetic relationships between magmas at Kīlauea.

Hawaii↗

USGS2025

Growth of a passive lava lake during the 2020–2021 eruption of Kīlauea volcano, Hawaii

We investigate the growth of a passive lava lake in Halemaʻumaʻu crater during the December 2020 to May 2021 eruption of Kīlauea volcano, Hawaii. Fed by vents above their surfaces, the formation of passive lava lakes in topographic lows is an important process in the growth of basaltic volcanoes. We captured visible and thermal images during 17 helicopter overflights and applied structure-from-motion photogrammetry to create digital elevation models and orthomosaics of Halemaʻumaʻu. These data products allowed us to track eruptive activity and processes. The bulk time-averaged discharge rate (TADR) in December 2020 initially exceeded 100 m 3 s –1 but decreased to < 10 m 3 s –1 within seven days. By February 2021, TADR was < 2 m 3 s –1 and continued to decrease until the eruption ended in May 2021. A total volume of 40.6 ± 0.5 × 10 6 m 3 of lava filled Halemaʻumaʻu to a depth of 225 m. As TADR decreased, the lake progressively developed an immobile, solidified crust, beginning with surfaces farthest from the vent. This immobile surface rose endogenously, whereas exogenous surface rise occurred near the vent. Eruptive activity at a vent ended when the level of the lake surface exceeded that of the vent, which we attribute to the effects of lava sitting above the vent on ascending magma. Regular helicopter overflights, combined with field observations and the extensive monitoring network at Kīlauea, generated an unprecedented density of observations that provide insights into the emplacement of passive lava lakes and how these eruptions wane and end.

Hawaii↗

USGS2024

Earthquake cycle mechanics during caldera collapse: Simulating the 2018 Kīlauea eruption

In multiple observed caldera-forming eruptions, the rock overlying a draining magma reservoir dropped downward along ring faults in sequences of discrete collapse earthquakes. These sequences are analogous to tectonic earthquake cycles and provide opportunities to examine fault mechanics and collapse eruption dynamics over multiple events. Collapse earthquake cycles have been studied with zero-dimensional slider-block models, but these do not account for the complicated interplay between fluid and elastic dynamics or for factors such as the heterogeneous fault properties and non-vertical ring fault geometries often inferred at volcanoes. We present two-dimensional axisymmetric mafic piston-like collapse earthquake cycle models that include rate-and-state friction, fully-dynamic elasticity, and compressible viscous fluid magma flow. We demonstrate that collapse earthquake intervals and magnitudes are highly sensitive to inertial effects, evolving stress fields, fault geometry, and depth-varying fault friction. Given the consistent earthquake cycles observed in most eruptions, this suggests that ring faults can quickly stabilize and often become nearly vertical at depth. We use the well-monitored 2018 collapse sequence at Kı̄lauea as a case study. Our model can produce many features of Kı̄lauea seismic and geodetic observations, except for a significant amount of interseismic slip, which cannot be readily explained with simple rate-and-state friction parameterizations.

Hawaii↗

USGS2024

Tracking magma pathways and surface faulting in the Southwest Rift Zone and the Koaʻe fault system (Kīlauea volcano, Hawai ‘i) using photogrammetry and structural observations

Volcanic islands are often subject to flank instability, resulting from a combination of magmatic intrusions along rift zones and gravitational spreading causing extensional faulting at the surface. Here, we study the Koaʻe fault system (KFS), located south of the summit caldera of Kīlauea volcano in Hawaiʻi, one of the most active volcanoes on Earth, prone to active faulting, episodic dike intrusions, and flank instability. Two rift zones and the KFS are major structures controlling volcanic flank instability and magma propagation. Although several magmatic intrusions occurred over the KFS, the link between these faults, two nearby rift zones and the flank instability, is still poorly studied. To better characterize the KFS and its structural linkage with the surrounding fault and rift zones, we performed a detailed structural analysis of the extensional fault system, coupled with a helicopter photogrammetric survey, covering part of the south flank of Kīlauea. We generated a high-resolution DEM (~ 8 cm) and orthomosaic (~ 4 cm) to map the fracture field in detail. We also collected ~ 1000 ground structural measurements of extensional fractures during our three field missions (2019, 2022, and 2023). We observed many small, interconnected grabens, monoclines, rollover structures, and en-echelon fractures that were in part previously undocumented. We estimate the cumulative displacement rate across the KFS during the last 600 ~ 700 years and found a decrease toward the west of the horizontal component from 2 to 6 cm per year, consistent with GNSS data. Integrating morphology observations, fault mapping, and kinematic measurements, we propose a new kinematic model of the upper part of the Kīlauea’s south flank, suggesting a clockwise rotation and a translation of a triangular wedge. This wedge is bordered by the extensional structures (ERZ, SWRZ, and the KFS), largely influenced by gravitational spreading. These findings illustrate a structural linkage between the two rift zones and the KFS, the latter being episodically affected by dike intrusions.

Hawaii↗

USGS2024

Olivine diffusion constrains months-scale magma transport within Kīlauea volcano’s summit reservoir system prior to the 2020 eruption

The unprecedented 2018 summit collapse at Kīlauea and subsequent 2020–2021 eruption within the newly deepened Halema‘uma‘u Crater provide an unparalleled opportunity to understand how collapse events impact a volcano’s shallow reservoir system and magmatic processes. Glass and olivine from tephra ejected by lava fountains and several explosions on 20–21 December, within a few hours of the 2020 eruption onset, yield information about pre-eruptive magma storage and transport. The olivine population is bimodal with zoned and non-zoned phenocrysts. Normally zoned olivine crystals with core compositions around Fo 88 have 30–50 μm wide Fo 82 overgrowth rims that have skeletal textures. Two skeletal xenocrysts (cores Fo 74 and Fo 81 ) are also reversely zoned up to Fo 82 rims. The crystal cores have trace element records of at least two cycles of growth and dissolution prior to the formation of the overgrowth rims. These rims and a separate population of non-zoned Fo 82 crystals are in Fe–Mg equilibrium with their host glass (average MgO of 6.9 ± 0.4 wt% (1σ), Mg# [Mg / (Mg + Fe 2+ )] of 0.57), which suggests undercooling after intrusion of magma to shallow levels in the plumbing system. In the years prior to the 2018 collapse, non-zoned Fo 81 olivine and slightly lower MgO glasses (6.8 wt%) reflected continuous mixing and compositional buffering of magma recharge into several km 3 of stored magma in the Halema‘uma‘u reservoir (1–2 km depth). The 2020 olivine crystals lack evidence of an intrusion mixing with resident shallow magma, indicating that magma transport occurred in a disrupted system, and/or it may not have significantly mixed with stored magma remaining in the Halema‘uma‘u reservoir after the events of 2018. Diffusion modeling of Fe–Mg exchange in the zoned 2020 olivine crystals yield timescales that are mostly 60 days prior to the eruption or less, which aligns well with 22–24 October 2020 and subsequent seismic swarms at Nāmakani Paio ~ 5 km west of Kīlauea’s summit caldera. This correlation indicates that magma intruding beneath the summit (volume accommodation, recorded by the olivine crystals) was expressed by tectonic earthquakes along the Ka‘ōiki fault zone (stress accommodation). The absence of precursory SO 2 within minutes prior to eruption also indicates that the 2020 December magma may have risen from 1 to 2 km depth to the surface in as little as 10 min.

Hawaii↗

USGS2023

Coordinating science during an eruption: Lessons from the 2020–2021 Kīlauea volcanic eruption

Data collected during well-observed eruptions can lead to dramatic increases in our understanding of volcanic processes. However, the necessary prioritization of public safety and hazard mitigation during a crisis means that scientific opportunities may be sacrificed. Thus, maximizing the scientific gains from eruptions requires improved planning and coordinating science activities among governmental organizations and academia before and during volcanic eruptions. One tool to facilitate this coordination is a Scientific Advisory Committee (SAC). In the USA, the Community Network for Volcanic Eruption Response (CONVERSE) has been developing and testing this concept during workshops and scenario-based activities. The December 2020 eruption of Kīlauea volcano, Hawaii, provided an opportunity to test and refine this model in real-time and in a real-world setting. We present here the working model of a SAC developed during this eruption. Successes of the Kīlauea SAC (K-SAC) included broadening the pool of scientists involved in eruption response and developing and codifying procedures that may form the basis of operation for future SACs. Challenges encountered by the K-SAC included a process of review and facilitation of research proposals that was too slow to include outside participation in the early parts of the eruption and a decision process that fell on a small number of individuals at the responding volcano observatory. Possible ways to address these challenges include (1) supporting community-building activities between eruptions that make connections among scientists within and outside formal observatories, (2) identifying key science questions and pre-planning science activities, which would facilitate more rapid implementation across a broader scientific group, and (3) continued dialog among observatory scientists, emergency responders, and non-observatory scientists about the role of SACs. The SAC model holds promise to become an integral part of future efforts, leading in the short and longer term to more effective hazard response and greater scientific discovery and understanding.

Hawaii↗

USGS2022

Damage assessment for the 2018 lower East Rift Zone lava flows of Kīlauea volcano, Hawaiʻi

Cataloguing damage and its correlation with hazard intensity is one of the key components needed to robustly assess future risk and plan for mitigation as it provides important empirical data. Damage assessments following volcanic eruptions have been conducted for buildings and other structures following hazards such as tephra fall, pyroclastic density currents, and lahars. However, there are relatively limited quantitative descriptions of the damage caused by lava flows, despite the number of communities that have been devastated by lava flows in recent decades (e.g., Cumbre Vieja, La Palma, 2021; Nyiragongo, Democratic Republic of Congo, 2002 and 2021; Fogo, Cape Verde, 2014–2015). The 2018 lower East Rift Zone (LERZ) lava flows of Kīlauea volcano, Hawaiʻi, inundated 32.4 km 2 of land in the Puna District, including residential properties, infrastructure, and farmland. During and after the eruption, US Geological Survey scientists and collaborators took over 8000 aerial and ground photographs and videos of the eruption processes, deposits, and impacts. This reconnaissance created one of the largest available impact datasets documenting an effusive eruption and provided a unique opportunity to conduct a comprehensive damage assessment. Drawing on this georeferenced dataset, satellite imagery, and 2019 ground-based damage surveys, we assessed the pre-event typology and post-event condition of structures within and adjacent to the area inundated by lava flows during the 2018 LERZ eruption. We created a database of damage: each structure was assigned a newly developed damage state and data quality category value. We assessed 3165 structures within the Puna District and classified 1839 structures (58%) as destroyed, 90 structures (3%) as damaged, and 1236 (39%) as unaffected. We observed a range of damage states, affected by the structural typology and hazard characteristics. Our study reveals that structures may be damaged or destroyed beyond the lava flow margin, due to thermal effects from the lava flow, fire spread, or from exposure to a range of hazards associated with fissure eruptions, such as steam, volcanic gases, or tephra fall. This study provides a major contribution to the currently limited evidence base required to forecast future lava flow impacts and assess risk.

Hawaii↗

USGS2022

Earthquake-derived seismic velocity changes during the 2018 caldera collapse of Kīlauea volcano

The 2018 Kīlauea caldera collapse produced extraordinary sequences of seismicity and deformation, with 62 episodic collapse events which significantly altered the landscape of the summit region. Despite decades of focused scientific studies at Kīlauea, detailed information about the internal structure of the volcano is limited. Recently developed techniques in seismic interferometry can be used to monitor the internal structure of an active volcano more directly by detecting subtle spatiotemporal changes in seismic wave velocity, but their utility relies on accurate interpretations of the underlying phenomena causing those velocity changes. Here, we retrospectively apply repeating-earthquake-based seismic interferometry to the 2018 Kīlauea eruption sequence. We find that seismic velocities changed over two distinct time scales: a sudden increase followed by a slower decrease in velocity in the hours following each collapse event, and a gradual, long-term decrease in velocity over several weeks that ceased approximately 1 month prior to the end of the eruption. Modeling suggests that short-term changes can be explained by magma reservoir pressurization which specifically closed vertical ring fractures. Long-term changes are related to subsidence of the caldera and likely include the influence of inelastic strain from the formation of new fractures. These observations provide new insights into the evolution of Kīlauea during its progressive collapse and will inform future interpretations for near-real-time monitoring at hazardous volcanoes around the world using similar techniques, especially where a dominant fracture orientation is present.

Hawaii↗

USGS2022

Modeling the occurrence of M ∼ 5 caldera collapse-related earthquakes in Kīlauea volcano, Hawai'i

During the 2018 Kīlauea eruption and caldera collapse, M ∼ 5 caldera collapse earthquakes occurred almost daily from mid-May until the beginning of August. While caldera collapses happen infrequently, the collapse-related seismicity damaged nearby structures, and so these events should be included in a complete seismic hazard assessment. Here, we present an approach to forecast the seismic hazard of the collapse earthquakes. We model their occurrence by combining a Poisson distribution for the number of collapses with a negative binomial for the number of earthquakes in a collapse, based on observations at Kīlauea. This rate model is then combined with a ground motion model to assess the seismic hazard posed by caldera collapse events. The rate model is non-Poisson but a Poisson model is adequate for low exceedance probabilities (e.g., <10% in 50 years). This approach could be generalized to model the hazard from earthquakes triggered by other underlying processes.

Hawaii↗

USGS2021

Proportions, timing, and re-equilibration progress during the 1959 Summit Eruption of Kīlauea: An example of magma mixing processes operating during OIB petrogenesis

Petrographic and chemical analysis of scoria samples collected during the 1959 Kīlauea summit eruption illustrates the progress of thermal and chemical homogenization of the melts, and the gradual growth and/or re-equilibration of olivine phenocrysts, over the course of the eruption. Glass compositions show that thermal equilibration was largely complete within the span of the eruption, whereas chemical homogenization was a work in progress. The olivine phenocryst population, known to contain conspicuous antecrystic components, is also hybrid within the euhedral population. The bulk of the olivine reached the level of the erupting magma on November 18–19, 1959. Zoning patterns in olivine phenocrysts show that initially unzoned grains developed normal zoning by the end of the eruption. Reverse zoning in relatively Fe-rich olivine phenocrysts (interpreted as cognate to the stored magma) was progressively eliminated from November 21 to December 19, 1959, by diffusive re-equilibration between crystals and melt. Toward the end of the eruption, the only olivine composition in direct contact with the melt was Fo 84–86 , with the original rim compositional heterogeneity gone in 4–5 weeks’ time. Activity in December 1959 differed from that in November, as high fountaining events were more closely spaced and almost all samples were picritic, with bulk MgO ≥16·5 wt%. Three different levels were in play during the 1959 eruption: a deep source for high-MgO melts and forsteritic (Fo 87–89 ) olivines, an intermediate source for the bulk of the stored magma, and a shallower source for the most differentiated magma. This model is consistent with geophysical, petrological and chemical observations. Comparison of the 1959 eruption with results from older explosive deposits suggests that stored and recharge melts and olivine from the deeper parts of Kīlauea’s plumbing are similar in composition to those observed or inferred in the 1959 eruption, so they behave similarly during extrusive and explosive periods alike.

Hawaii↗

USGS2021

A decade of geodetic change at Kīlauea’s summit—Observations, interpretations, and unanswered questions from studies of the 2008–2018 Halemaʻumaʻu eruption

On March 19, 2008, a small explosion heralded the onset of an extraordinary eruption at the summit of Kīlauea Volcano. The following 10 years provided unprecedented access to an actively circulating lava lake located within a region monitored by numerous geodetic tools, including Global Navigation Satellite System (GNSS), interferometric synthetic aperture radar (InSAR), tilt, and gravity. These datasets revealed a range of processes occurring on widely different timescales. Over years, pressure change within the summit magmatic system, determined from ground deformation and lava-lake surface height, seems to have been governed by broad variations in the rate of magma supply from the mantle to the volcano’s shallow magmatic system, as well as changes in the efficiency of East Rift Zone (ERZ) magma transport and eruption. Over weeks to months, intrusions at the summit and along the ERZ, where new eruptive vents commonly formed and intrusions were primed by extension from south-flank motion, were a result of short-term increases in magma supply or waning lava effusion from the ERZ. Waning lava effusion caused magma to back up behind the ERZ eruptive vent all the way to the summit. ERZ intrusions and eruptions caused rapid depressurization of the summit magmatic system, whereas summit intrusions resulted in complex deformation patterns as magma moved to and from two main sub-caldera storage areas. Over hours to days, pressure changes were caused by episodic deflation-inflation (DI) events and possibly small summit intrusions, and deformation of the rim of the summit eruptive vent revealed instabilities that indicated an increased potential for collapse and minor explosive activity. Finally, over timescales of minutes to hours, gas pistoning, summit explosions, very-long-period seismic events, and even the airborne eruptive plume had clear manifestations in geodetic datasets, providing insights into the causes and consequences of those processes. The diversity and quantity of geodetic observations shed important light on this exceptional and well-documented decade-long summit eruption and its accompanying phenomena, yet numerous questions remain about the causal mechanisms, physical processes, and magmatic conditions associated with eruptive and intrusive activity.

Hawaii↗

USGS2021

High-speed lava flow infrasound from Kīlauea’s fissure 8 and its utility in monitoring effusion rate

The 2018 eruption of Kīlauea Volcano produced large and destructive lava flows from the fissure 8 (Ahu ‘aila ‘au) vent with flow velocities up to 17 m s −1 , highly variable effusion rates over both short (minutes) and long (hours) time scales, and a proximal channel or spillway that displayed flow features similar to open channel flow in river systems. Monitoring such dynamic vent and lava flow systems is a challenge. Our results demonstrate that infrasound, combined with ground-based observations and imagery from unoccupied aircraft systems (UAS), can be used to distinguish vent degassing activity from high-speed lava flow activity. We use spectral characteristics and the infrasound frequency index (FI) to distinguish spillway infrasound from vent infrasound. Comparing FI with flow speeds derived from UAS videos reveals that spillway infrasound only occurs when flow speeds were sufficiently high to cause a supercritical flow state and breaking waves (Froude values > 1.7), and we propose that the spillway signals are produced primarily through the interaction of the turbulent lava-free surface with the atmosphere. We show that FI can also provide a means to track bulk effusion rate. Our results indicate that infrasound offers a new way to characterize lava flow channel hydraulics and is a powerful tool for monitoring effusive eruptions when high-speed flows are possible.

Hawaii↗

USGS2021

Rapid metal pollutant deposition from the volcanic plume of Kīlauea, Hawai’i

Long-lived basaltic volcanic eruptions are a globally important source of environmentally reactive, volatile metal pollutant elements such as selenium, cadmium and lead. The 2018 eruption of Kīlauea, Hawai’i produced exceptionally high discharge of metal pollutants, and was an unprecedented opportunity to track them from vent to deposition. Here we show, through geochemical sampling of the plume that volatile metal pollutants were depleted in the plume up to 100 times faster than refractory species, such as magnesium and iron. We propose that this rapid wet deposition of complexes containing reactive and potentially toxic volatile metal pollutants may disproportionately impact localised areas close to the vent. We infer that the relationship between volatility and solubility is an important control on the atmospheric behaviour of elements. We suggest that assessment of hazards from volcanic emissions should account for heterogeneous plume depletion of metal pollutants.

Hawaii↗

USGS2021

Earthquakes indicated magma viscosity during Kīlauea’s 2018 eruption

Magma viscosity strongly controls the style (for example, explosive versus effusive) of a volcanic eruption and thus its hazard potential, but can only be measured during or after an eruption. The identification of precursors indicative of magma viscosity would enable forecasting of the eruption style and the scale of associated hazards 1 . The unanticipated May 2018 rift intrusion and eruption of Kīlauea Volcano, Hawai‘i 2 displayed exceptional chemical and thermal variability in erupted lavas, leading to unpredictable effusion rates and explosivity. Here, using an integrated analysis of seismicity and magma rheology, we show that the orientation of fault-plane solutions (which indicate a fault’s orientation and sense of movement) for earthquakes preceding and accompanying the 2018 eruption indicate a 90-degree local stress-field rotation from background, a phenomenon previously observed only at high-viscosity eruptions 3 , and never before at Kīlauea 4,5,6,7,8 . Experimentally obtained viscosities for 2018 products and earlier lavas from the Pu‘u ‘Ō‘ō vents tightly constrain the viscosity threshold required for local stress-field reorientation. We argue that rotated fault-plane solutions in earthquake swarms at Kīlauea and other volcanoes worldwide provide an early indication that unrest involves magma of heightened viscosity, and thus real-time monitoring of the orientations of fault-plane solutions could provide critical information about the style of an impending eruption. Furthermore, our results provide insight into the fundamental nature of coupled failure and flow in complex multiphase systems.

Hawaii↗

USGS2021

Submarine lava deltas of the 2018 eruption of Kilauea volcano

Hawaiian and other ocean island lava flows that reach the coastline can deposit significant volumes of lava in submarine deltas. The catastrophic collapse of these deltas represents one of the most significant, but least predictable, volcanic hazards at ocean islands. The volume of lava deposited below sea level in delta-forming eruptions and the mechanisms of delta construction and destruction are rarely documented. Here, we report on bathymetric surveys and ROV observations following the Kīlauea 2018 eruption that, along with a comparison to the deltas formed at Pu‘u ‘Ō‘ō over the past decade, provide new insight into delta formation. Bathymetric differencing reveals that the 2018 deltas contain more than half of the total volume of lava erupted. In addition, we find that the 2018 deltas are comprised largely of coarse-grained volcanic breccias and intact lava flows, which contrast with those at Pu‘u ‘Ō‘ō that contain a large fraction of fine-grained hyaloclastite. We attribute this difference to less efficient fragmentation of the 2018 ‘a‘ā flows leading to fragmentation by collapse rather than hydrovolcanic explosion. We suggest a mechanistic model where the characteristic grain size influences the form and stability of the delta with fine grain size deltas (Pu‘u ‘Ō‘ō) experiencing larger landslides with greater run-out supported by increased pore pressure and with coarse grain size deltas (Kīlauea 2018) experiencing smaller landslides that quickly stop as the pore pressure rapidly dissipates. This difference, if validated for other lava deltas, would provide a means to assess potential delta stability in future eruptions.

Hawaii↗

USGS2021

Kīlauea’s 2008–2018 summit lava lake—Chronology and eruption insights

The first eruption at Kīlauea’s summit in 25 years began on March 19, 2008, and persisted for 10 years. The onset of the eruption marked the first explosive activity at the summit since 1924, forming the new “Overlook crater” (as the 2008 summit eruption crater has been informally named) within the existing crater of Halemaʻumaʻu. The first year consisted of sporadic lava activity deep within the Overlook crater. Occasional small explosions deposited spatter and small wall-rock lithic pieces around the Halemaʻumaʻu rim. After a month-long pause at the end of 2008, deep sporadic lava lake activity returned in 2009. Continuous lava lake activity began in February 2010. The lake rose significantly in late 2010 and early 2011, before subsequently draining briefly in March 2011. This disruption of the summit eruption was triggered by eruptive activity on the East Rift Zone. Rising lake levels through 2012 established a more stable, larger lake in 2013, with continued enlargement over the subsequent 5 years. Lava reached the Overlook crater rim and overflowed on the Halemaʻumaʻu floor in brief episodes in 2015, 2016, and 2018, but the lake level was more commonly 20–60 meters below the rim during 2014–18. The lake was approximately 280×200 meters (~42,000 square meters) by early 2018 and formed one of the two largest lava lakes on Earth. A new eruption began in the lower East Rift Zone on May 3, 2018, causing magma to drain from the summit reservoir complex. The lava in Halemaʻumaʻu had drained below the crater floor by May 10, followed by collapse of the Overlook and Halemaʻumaʻu craters. The collapse region expanded as much of the broader summit caldera floor subsided incrementally during June and July. By early August 2018, the collapse sequence had ended, and the summit was quiet. The historical changes in May–August 2018 brought a dramatic end to the decade of sustained activity at Kīlauea’s summit. The unique accessibility of the 2008–18 lava lake provided new observations of lava lake behavior and open-vent basaltic outgassing. Data indicated that explosions were triggered by rockfalls from the crater walls, that the lake consisted of a low-density foamy lava, that cycles of gas pistoning were rooted at shallow depths in the lake, and that lake level fluctuations were closely tied to the pressure of the summit magma reservoir. Lava chemistry added further support for an efficient hydraulic connection between the summit and East Rift Zone. Notwithstanding the benefits to scientific understanding, the eruption presented a persistent hazard of volcanic air pollution (vog) that commonly extended far from Kīlauea’s summit.

Hawaii↗

USGS2021

Groundwater dynamics at Kīlauea Volcano and vicinity, Hawaiʻi

Kīlauea Volcano, on the Island of Hawaiʻi, is surrounded and permeated by active groundwater systems that interact dynamically with the volcanic system. A generalized conceptual model of Hawaiian hydrogeology includes high-level dike-impounded groundwater, very permeable perched and basal aquifers, and a transition (mixing) zone between freshwater and saltwater. Most high-level groundwater is associated with the low-permeability intrusive complexes that underlie volcanic rift zones and calderas and also act to compartmentalize the groundwater system. Hydrogeologic studies of Kīlauea in recent decades, accompanied by deep research drilling, have shown that high-level groundwater is more widespread than once understood, that permeability decreases dramatically at depth, particularly in rift zones, and that freshwater can occur at depths of as much as several kilometers below the local water table. Copious groundwater recharge causes near-surface conductive heat flow to be near zero over much of Kīlauea. Approximately 95 percent of groundwater discharge occurs offshore, accompanied by approximately 99 percent of the approximately 6,000 megawatts of heat supplied by magmatic intrusion. Here, we summarize current understanding of the groundwater system of Kīlauea Volcano and describe transient changes during the decade or more preceding the 2018 eruption sequence. The changes in groundwater chemistry and thermal structure beneath Kīlauea summit hold implications for volcanic-volatile transport and the potential for explosive volcanism. Between 2008 and 2018, the magma conduit beneath the lava lake likely created an adjacent zone of very hot rock that significantly delayed liquid groundwater inflow to the draining magma conduit. Sulfate concentrations in groundwater beneath Kīlauea summit, sampled at the National Science Foundation-funded drill hole 1.5 kilometers south-southwest of the lava lake, declined substantially between 2010 and present. This decline likely reflects, at least in part, the decreased effectiveness of volatile condensation and solution into groundwater (scrubbing). The vent opening in 2008 presumably focused volatile flux into the vicinity of the vent, and progressive drying of the surroundings further restricted interaction with the groundwater system. The decrease in sulfate concentrations in the drill hole between 2010 and 2018 likely reflects decreased effectiveness of scrubbing.

Hawaii↗