Geology ReportsSearch

Geology topics

Research about California

Source-linked reports with geographic coverage including California.

118 records · Page 4Linked to original sources

Irrigated agriculture influences selenium levels in an endangered marsh bird

Selenium bioaccumulation in aquatic food webs poses risks to wildlife, particularly in wetlands receiving irrigation runoff. The Salton Sea, California’s largest lake, is primarily sustained by agricultural drainage. This drainage creates wetland habitat along the lakeshore that many bird species depend on, including the federally endangered Yuma Ridgway’s rail ( Rallus obsoletus yumanensis ). However, these marshes may pose an ecological trap – attracting rails despite high selenium exposure. We captured rails during the 2020–2023 breeding seasons and compared rail selenium levels within three types of marshes (fed with irrigation runoff, Colorado River water, or groundwater). We collected blood, breast feathers, and head feathers of rails in all three water sources for selenium comparisons. We tagged adult rails with GPS transmitters to locate nests and foraging locations where we collected eggshells, unhatched eggs, and prey. We assessed selenium exposure by collecting multiple prey species commonly eaten by rails in all three water sources. Selenium concentrations varied among sampling locations. Selenium concentrations in most sample types were predominately influenced by water source and marsh inflow velocity (sometimes in combination with marsh size). Distance to inflow, however, did not influence selenium concentrations in any sample type. Selenium concentrations were highest in agricultural-fed marshes compared to river-fed and spring-fed marshes. Increased marsh inflow velocities resulted in lower selenium concentrations. Given the risk of an ecological trap, our results suggest that supplementing wetlands with Colorado River water could mitigate selenium bioaccumulation in Yuma Ridgway’s rails.

California

Updating regional‐scale geospatial liquefaction models with locally available geotechnical data

We present a method to update the geospatial liquefaction model used by the U.S. Geological Survey’s near‐real‐time ground failure product with subsurface geotechnical data. The geospatial model estimates liquefaction probability from peak ground velocity (via ShakeMap) and geospatial susceptibility proxies. In many regions, additional information relevant to constraining liquefaction likelihood is also available, including surface geology maps and subsurface geotechnical measurements. There is currently no mechanism to use these data in the ground failure product liquefaction model, even though these data could provide more precise constraints on spatial variations in the lithologic character of the soil (surface geology) and direct measurements of the subsurface mechanical properties that affect liquefaction occurrence and severity (geotechnical measurements). In this study, we develop a method to integrate these data with the geospatial model and assess how these data can improve regional‐scale predictions. We develop a Bayesian updating framework and apply it to the 1989 magnitude 6.9 Loma Prieta, California, earthquake, for which mapped observations are available to evaluate performance. We constrain the Bayesian framework with 373 Northern California cone penetration tests and liquefaction susceptibility classes based on the mapped surface geology. This Bayesian model incorporates geotechnical information into the geospatial model and more accurately predicts liquefaction occurrences than the geospatial model, while sacrificing less accuracy in terms of predicting the absence of liquefaction than the geotechnical model. In future applications, this approach could be adapted to update other geospatial models using locally available subsurface data.

California

Did they feel it? Legacy maroseismic data illuminates an engimatic 20th century earthquake

The challenges and the importance of preserving legacy instrumental records of earthquakes are now well-recognized (e.g., Richards & Hellweg, 2020, https://doi.org/10.1785/0220200053 ). Seismologists may not be aware of parallel challenges and opportunities with legacy macroseismic data for earthquakes in the United States. For much of the 20th century, macroseismic data were collected by a series of U.S. government agencies using a standard questionnaire distributed on postcards. Published summaries of postcards provide macroseismic data akin to modern Did You Feel It? questionnaire responses. In this paper we focus on the M 6.5 Fickle Hill, California earthquake, on 21 December 1954 (Hellweg et al., 2025) as a proof-of-concept, illustrating the potential of what we dub Did They Feel It? (DTFI) data to improve our understanding of significant 20th century U.S. earthquakes for which instrumental data are sparse. Legacy macroseismic data interpreted following modern conventions can potentially constrain traditional ShakeMaps at a level of detail and accuracy that in some respects rival maps for modern earthquakes. The updated ShakeMap for the 1954 Fickle Hill earthquake, also drawing from recently published media and first-person accounts, supports the location, depth, and stress drop value estimated from available instrumental data (Hellweg et al., 2025).

California

Mechanics and statistics of postseismic shaking

Analysis of two weeks of continuous post-seismic shaking after the 2019 M7.1 Ridgecrest, CA earthquake sequence using 4 nearby borehole seismometers reveals that continuous ground motions decay as Omori’s law in time and follow the Gutenberg-Richter distribution in logarithmic amplitude. The measured temporal decay in amplitudes agrees with predictions of the rate-and-state framework and indicates shaking amplitudes are proportional to the velocity of afterslip. Our ground motion-based statistical framework provides a basis to forecast shaking intensity in the minutes to hours after a large earthquake.

California

Extremophile hotspots linked to containerized industrial waste dumping in a deep-sea basin

Decaying barrels on the seafloor linked to DDT contamination have raised concerns about the public health implications of decades old industrial waste dumped off the coast of Los Angeles. To explore their contents, we collected sediment cores perpendicular to five deep-sea barrels. The concentration of DDT and its breakdown products were highly elevated relative to control sites yet did not vary with distance from the barrels, suggesting that they were not associated with the contamination. Sediment cores collected through white halos surrounding three barrels were enriched in calcite and had elevated pH. The associated microbial communities were low diversity and dominated by alkalophilic bacteria with metagenome-assembled genomes adapted to high pH. A solid concretion sampled between a white halo and barrel was composed of brucite, a magnesium hydroxide mineral that forms at high pH. Based on these findings, we postulate that leakage of containerized alkaline waste triggered the formation of mineral concretions that are slowly dissolving and raising the pH of the surrounding sediment pore water. This selects for taxa adapted to extreme alkalinity and drives the precipitation of “anthropogenic” carbonates forming white halos, which serve as a visual identifier of barrels that contained alkaline waste. Remarkably, containerized alkaline waste discarded >50 years ago represents a persistent pollutant creating localized mineral formations and microbial communities that resemble those observed at some hydrothermal systems. These formations were observed at one-third of the visually identified barrels in the San Pedro Basin and have unforeseen, long-term consequences for benthic communities in the region.

California

Seismic response of rock towers at the Trona Pinnacles (U.S.A.) to the 2019 Ridgecrest earthquake sequence: Theory, observations, and models

We analyze the seismic response of a class of fragile geologic features (FGFs), referred to as rock towers (RTs) at the Trona Pinnacles, a group of RTs in southern California that suffered strong shaking during the 2019 Ridgecrest earthquake sequence. FGFs, including RTs, may provide maximum constraints on past earthquake shaking intensity, and thereby support probabilistic seismic hazard assessments (PSHAs). In a rare case study, we explore the hypothesis that RT structural integrity is time dependent, as damage accumulates progressively. We develop finite‐element method (FEM) models of the RTs using photogrammetric shape models. We validate the models by comparing numerical simulations of their response to broadband ground shaking with low‐intensity seismic recordings obtained at the Pinnacles. Results of our simulations are in good agreement with the seismic recordings of actual earthquake aftershocks. We next use the results of the FEM models to analyze the response and evolution of RTs. Our analyses elucidate the influence of geometry over their seismic response, providing a rationale that may explain the rarity of slender RTs at Trona: high‐aspect‐ratio structures that respond in bending develop detrimental tensile stresses that crack the rock, whereas low‐aspect‐ratio ones’ response also includes shearing, which does not compromise material integrity as much as tension. Field measurements with a rebound hammer support this finding, suggesting that the material around the base of slender rocks has been weakened relative to other parts of the RT. We also study how to define simplified mechanical models (“archetypes”) to predict the natural frequencies of RTs. Results from our work illuminate the fundamental mechanisms of seismic response and progressive failure of RTs, and open new avenues of research to potentially incorporate these geologic features as long‐return period constraints on PSHA, in ways analogous to those of the widely used precariously balanced rocks.

California

Melt generation sources and conditions in the wake of a migrating slab window: Geochemistry and petrology of the million-year history of primitive volcanism at Clear Lake volcanic field, California

Clear Lake volcanic field (CLVF) is the northernmost and youngest (~2.2 Ma to 8 ka) of the volcanic centers distributed along the San Andreas transform fault in western California. The initial phase of CLVF volcanism (interval one) occurred between ~2.2 and 1.3 Ma and extends ~35 km southeast of Clear Lake, forming a semi-continuous upland plateau capped by lava flows, with isolated volcanic remnants on the periphery. This volcanism is broadly characterized by geochemically primitive compositions that reflect three source compositions and conditions of melt generation. (1) Partial melting of upwelling asthenospheric mantle lherzolite at moderate pressures (1.2–1.4 GPa) and temperatures (1297–1329 °C) produced high-CaO (9.8–11.3 wt %) basalts with high Al 2 O 3 (16.8–17.6 wt %), Mg#s (66–70), MgO (8–10 wt %), Ni (103–262 μg/g), and Cr (284–609 μg/g). These high-CaO basalts contain olivine (Fo 87–91 ) phenocrysts with Cr-spinel inclusions ± subordinate plagioclase and crop out only in the southern part of the CLVF. (2) Partial melting of depleted sub-continental lithospheric mantle harzburgite at variable pressures (0.7–1.5 GPa) and temperatures (1097–1299 °C) produced a compositional continuum of med-K 2 O, calc-alkaline, high-MgO basalts through high-MgO andesites with high Mg#s (67–77), MgO (8–14 wt %) and high Ni and Cr abundances (154–439 and 340–1124 μg/g, respectively). Mineral assemblages are olivine (Fo 88–93 ) with Cr-spinel inclusions ± subordinate clinopyroxene, orthopyroxene and plagioclase. Small (<2.5 cm) mantle harzburgite xenoliths and mantle olivine xenocrysts are also found in several of these samples. These high-MgO basalts through andesites represent the largest volume of primitive compositions and have erupted predominantly along the main, fault-controlled northwest-southeast trending axis of volcanism with peripheral outcrops to the north, west, and east. (3) Partial melting of the Gorda eclogite slab edge produced adakitic silicic slab melts with strong depletion in the heavy rare earth elements (Yb = 0.6 μg/g). Subsequent reaction of those melts with depleted ultramafic rocks during ascent imprinted the adakitic dacites with high Mg#s (65–78) and elevated Ni (117–210 μg/g) and Cr (191–283 μg/g). Phenocrysts of orthopyroxene (En 87–94 ) with spinel inclusions (Cr# = 80–88) and extremely Ni-rich (9483 μg/g) olivine cores (Fo 84–93 ) record those reactions. Small-volume outcrops of the adakites on the eastern periphery of the CLVF track the passing slab edge. The trio of melting sources recorded by early CLVF magmatism reflect the tectonically complex environment and the hot (1097–1329 °C), shallow (0.7–1.5 GPa) melting conditions for these primitive compositions and provide estimates of the heat delivered to the crust. Over time, this flux led to maturation of the CLVF magmatic system toward the more voluminous and silicic volcanism that characterizes the balance of its subsequent volcanic history and maintains the present-day anomalously high heat flow in the region. The current interval (interval four) of volcanic activity at CLVF is characterized by low-volume, fault-controlled eruptions of basaltic andesite and andesite suggestive of mantle magma and heat delivery to the crust, similar to interval one. This analogous activity provides motivation for the current study and begs the question of whether the system is undergoing thermal priming for renewed silicic volcanism.

California

Magnitude, depth and methodological variations of spectral stress drop within the SCEC/USGS Community Stress Drop Validation Study using the 2019 Ridgecrest Earthquake Sequence

We present the first ensemble analysis of the 56 different sets of results submitted to the ongoing Community Stress Drop Validation Study using the 2019 Ridgecrest, California, earthquake sequence. Different assumptions and methods result in different estimation of the source contribution to recorded seismograms, and hence to the source parameters (principally corner frequency, f c ⁠ , spectral stress drop, Δσ, and seismic moment, M 0 ⁠ ) obtained from modeling calculated source spectra. For earthquakes smaller than magnitude (M) 2.5 there is negligible correlation between the f c values obtained by different studies, implying that no present method is reliable using available data. For larger magnitude events, correlation between f c measurements of different studies, within even a small M range is always higher than spectral ⁠Δσ , because the f c measurements simply reflect the underlying physical decrease in f c with increasing M. We model the observed trends of submitted f c with both magnitude and depth. Most methods report an increase in spectral Δσ with M, although a magnitude‐invariant spectral Δσ is within the confidence limits. The depth dependence is smaller and depends on whether a study allows attenuation to vary with source depth; a combination of depth‐dependent attenuation correction, and depth‐dependent shear‐wave velocity can compensate for reported depth trends. We model the submitted values to remove differing M and depth variation to investigate the relative interevent variability. We find consistent relative variation between individual events, and also lower relative spectral Δσ in the northwest of the aftershock sequence, and higher on the cross fault and in the region of main fault intersection. This large‐scale comparison implies that absolute spectral Δσ estimates are dependent on the methods used; studies of different regions or using different methods should not be directly compared and improved constraints on path and site corrections are needed to resolve these absolute spectral Δσ differences.

California

Young explosive eruptions from the Clear Lake volcanic field

The Clear Lake volcanic field is the northernmost and youngest field in a chain of volcanic fields in and near the California Coast Range mountains. For 2 million years, numerous eruptions have happened around (and through) Clear Lake. The most recent period of activity in the Clear Lake volcanic field probably started around 40,000 years ago and was mainly explosive eruptions concentrated on and near faults in and around the lake. The combination of hot magma and groundwater created explosive releases of hot steam. The craters, called maars, threw out volcanic ash, pumice, and lava fragments, which fell back to the ground and draped the surrounding landscape. The deposits are visible in many places around the southeast end of the lake.

California

Landsliding follows signatures of wildfire history and vegetative regrowth in a steep coastal shrubland

Five years after the deadly and destructive 9 January 2018 Montecito debris flows (Santa Barbara County, California, USA), an atmospheric river storm on 9 January 2023 triggered widespread landsliding that affected many of the same drainages in the Santa Ynez Mountains. Using high-resolution aerial imagery, we identified >10,000 landslides over an ∼160 km 2 area. Most of the landslides were shallow (<1 m in depth) translational debris slides that initiated on steep (∼40°), south-facing hillslopes, with the highest incidence of landsliding in a sandstone-dominated bedrock unit. The landslides mobilized into debris flows and delivered substantial quantities of sediment downstream, which contributed to costly infrastructure impairments. We detected order-of-magnitude differences in landslide density across the study area that could not be attributed to variations in geomorphology (topographic aspect and slope), geology (bedrock type), or hydrology (seasonal antecedent rainfall, peak hourly storm rainfall intensity, total storm rainfall), which are usually considered relevant factors for shallow landsliding. Rather, we found that vegetation regrowth following wildfire was likely a relevant factor associated with the highly variable landslide densities. Hillslopes with less and different types of vegetation regrowth after fire appear to have been more susceptible to shallow landslides. We identify a possible vegetation control on postfire landsliding, which highlights an opportunity for hypothesis testing using more advanced techniques to track the evolution of vegetation cover and vegetation type in steep shrubland environments following wildfire.

California

Impact of land subsidence on housing sale values: Evidence from the San Joaquin Valley, California

This study assesses the impact of land subsidence on housing sale values in the San Joaquin Valley, California. The study utilizes home sale transactions and vertical land-surface displacement data from Interferometric Synthetic Aperture Radar techniques. Using fine-scale fixed effects, matching, as well as a repeat-sales approach, our results indicate that land subsidence resulted in a 2.4% to 5.8% reduction in housing sale values, with the largest reductions occurring in areas where substantial subsidence occurred. Such findings may have implications for groundwater management and can potentially help inform policy design to help mitigate the causes and impacts of land subsidence.

California

Rupture process of the Mw7.0 December 5, 2024 Offshore Cape Mendocino earthquake

The Mw7.0 December 5, 2024 Offshore Cape Mendocino earthquake ruptured a km long portion of the east-west trending Mendocino fault zone (MFZ). In order to clarify the rupture process, we assemble three-component seismograms from regional seismic stations, horizontal coseismic displacement vectors derived from Global Navigation Satellite System (GNSS) time series, and a Sentinel-1 ascending interferogram. These data are interpreted with a model of slip distributed on two vertical fault planes representative of the eastern MFZ and spanning the ~70 km length of the aftershock zone. Assuming right-lateral strike slip, we find that the rupture initiates in the oceanic mantle at 20-30 km depth and proceeds unilaterally updip and toward the east. Early aftershocks locate adjacent to the peak slip areas, tracking the coseismic rupture propagation from oceanic mantle to shallower depth and implying a significant role of static stress transfer in driving aftershocks in an ocean plate environment.

California

A newly identified creeping strand of the Concord fault, San Francisco Bay Area

The Concord fault constitutes a major branch of the Pacific–North America transform plate boundary in Northern California, bridging the strike‐slip Bartlett Springs ‐ Green Valley Fault system to the north with the Greenville and Calaveras Faults to the south. Like many faults in the San Francisco Bay Area its long‐term slip is partially accommodated by aseismic slip (creep). Although creep has been recognized and monitored on the northern half of the fault for decades, the precise location of the southern half of the fault and its slip rate—whether accommodated seismically or aseismically—has remained enigmatic. How slip transfers between the Concord and Greenville or Calaveras faults to the south remains an outstanding question. New field observations presented here indicate that the active trace of the fault south of downtown Concord is not where previously interpreted and is indeed actively creeping. We report observations of shallow creep continuing >7 km farther south along the Concord fault than previously reported, along a fault strand not previously recognized for most of its length. This is evident as right‐laterally deflected concrete curbs and sidewalk slabs on both sides of every street that crosses the fault at a high angle in southeast Concord and northeast Walnut Creek. We document the magnitude and location of these deflections to estimate accumulated right‐lateral aseismic slip expressed in engineered structures. Offsets of these piercing lines range from 8 to 18 cm, over widths varying from narrow breaks along centimeter‐scale concrete joints to 10‐m‐wide zones of deflection. Significantly, this active trace is ∼400 m west of where the Quaternary active trace has previously been inferred, placing it within—rather than bounding—the built area of suburban Concord. Slip along the fault has already caused infrastructure damage. These results revise our understanding of the southern Concord fault and help constrain its seismic potential.

California

Spatiotemporal variations in strain release and seismic rupture in multifault systems: An example from Panamint Valley, southeastern California

Geometrically complex, multifault ruptures have been observed in recent, damaging earthquakes in southeastern California, sparking renewed efforts to identify physical conditions that promote or inhibit fault discontinuity-spanning coseismic ruptures. The likelihood of ruptures propagating across fault discontinuities is thought to be partly controlled by fault geometries, rupture direction, and the history of strain release. However, these parameters vary in space and time over multiple earthquake cycles, making it difficult to forecast the likelihood that an earthquake on one fault will trigger rupture on a nearby fault. Here we use tectono-geomorphic mapping of a geometrically complex fault zone in Panamint Valley, southeastern California, to assess spatiotemporal variations of paleo-rupture patterns and geometries of fault discontinuities over multiple earthquake cycles. First, we identify ten generations of late Pleistocene to Holocene alluvium using geomorphic parameters and luminescence dating to constrain ages of alluvium and bracket late Holocene earthquake timing. Then, we quantify slip kinematics using high-resolution structure from motion digital surface models. We find the Panamint Valley transtensional relay (PVTR) hosted four late Holocene earthquakes, bracketed to ~5.8–3.4 ka, ~3.8–2.2 ka, ~2.4–0.6 ka, and ~0.64–0.16 ka, with ~0.6–1.1 m of slip per event, correlative to Mw ≈ 6.7–6.9 earthquakes. Additionally, we find similarities in earthquake timing on the Ash Hill, PVTR, and Panamint Valley faults and similarities in the slip magnitude and slip kinematics between the Ash Hill and PVTR faults, implying that the PVTR may co-rupture with nearby faults. Paleo-rupture patterns indicate that seismogenic strain transfer may occur through the PVTR, along different combinations of fault segments and jump distances, over multiple earthquake cycles. These data highlight the utility of tectono-geomorphic mapping in evaluating paleo-rupture patterns and suggest that the PVTR may act to propagate and/or arrest rupture between the Ash Hill and Panamint Valley faults.

California

Using public participatory geographic information systems (PPGIS) to explore uses and values for Mojave Trails National Monument, California

Many people ascribe a variety of values to public lands and waters, but some values are more difficult to assess and quantify than others. Public participatory geographic information systems (PPGIS) are tools that have been used to help quantify and map the public’s diverse values for a landscape. This work describes the first known Office of Management and Budget–approved use of PPGIS by a Department of the Interior bureau. The U.S. Geological Survey developed an internet-based application to aid in gathering PPGIS data, called Values Mapping for Planning in Regional Ecosystems (VaMPIRE). Further, this work describes the first pilot of the VaMPIRE application in coordination with the Bureau of Land Management to collect spatial data and other survey data regarding the public’s uses of and values for locations within Mojave Trails National Monument. We emailed the link to the VaMPIRE application to an interested party email list in 2024 with 207 valid emails and received 74 responses; we also received 47 responses from members of an off-roading social media group. Of the list of 16 value options, recreation was the most popular value for the monument, followed by wilderness and inspirational. Over 1,000 points were placed throughout the monument, indicating locations people use or value, with the locations spread throughout the entire monument. Additionally, most survey respondents stated their ability to receive benefits in locations they mapped would not change in response to a hypothetical scenario related to recreational facility development. This report describes exploratory results from the first use of the VaMPIRE tool in Mojave Trails National Monument and includes reflections on how the process went and considerations for future use of VaMPIRE.

California

Quantitative evaluations of earthquake early warning performance using “Did You Feel It?” and post-alert surveys

We examine responses to the U.S. Geological Survey’s “Did You Feel It?” (DYFI) survey and its companion earthquake early warning (EEW) questionnaire to assess the performance of the U.S. ShakeAlert EEW system directly from the alert recipients’ perspectives. ShakeAlert rapidly detects earthquakes and develops alert information, but as official alert delivery partners issue these alerts, it is thus difficult to determine how many people were alerted and when. We investigate DYFI reports for six California earthquakes that had EEW alerts and substantial responses to the DYFI EEW questionnaire. Comparisons of ShakeAlert predictions to reported intensities demonstrate that magnitude estimation accuracy is not necessarily indicative of ground-motion prediction accuracy. Perceived warning time distributions indicate that estimating maximum-expected warning times using the S-wave arrival is a reasonable assumption when discussing public EEW performance. However, we also find many reports of shorter warning times, late alerts, and missed alerts than expected based on ShakeAlert publication times, suggesting alert delivery latencies are substantial and highly variable. The novelty of our analysis is that we demonstrate that the DYFI EEW survey provides useful EEW efficacy information—independent of the specific alerting pathway—that can be used to inform our choices for conveying EEW performance.

California

Relationship between peak and cumulative ground motions from 49 Mw 3-6 earthquakes in the San Francisco Bay Area

We examine the relationship between peak ground velocity (PGV) and cumulative absolute displacement (CAD) for 49 M w 3 – 6 earthquakes in the San Francisco Bay Area (SFBA) and gain insight into the spatiotemporal partitioning of seismic energy in ground motion records with respect to source, path, and site effects. PGV and CAD are positively correlated, but there can be large deviations from the average trend. For example, ground motion records with either very long duration resonance or short pulse-like motions will have higher or lower CAD, respectively, but could have very similar PGV. We perform principal component analysis (PCA) on PGV-CAD for >7000 records in the SFBA with the goal of investigating what influences positive or negative anomalies in cumulative motions. PCA rotates the PGV-CAD datapoints into two principal components, where the one with the larger variance, which we call the “primary intensity” represents mostly the distance-dependence of ground motion amplitudes. The other principal component, which we call the “excess motion”, represents the deviation from cumulative motions that would be typical for a ground motion record with a given PGV. The excess motion will be positive in the case of records with long duration ringing and will be negative for short duration pulse-like ground motions. We find that excess motion is generally positive at sites in sedimentary basins and in soft sediments around the SF Bay. Excess motion is generally negative in the very near field, as well as at sites on hard bedrock. We discuss the findings here in terms of implications for seismic hazard applications and other wave propagation phenomena.

California

Three-dimensional seismic velocity models for the San Francisco Bay region, California from joint body-wave and surface-wave tomography validated by waveform simulation

A high-resolution seismic velocity model for both P and S waves is essential for the San Francisco Bay (SFB) region to accurately simulate earthquake ground motions and assess seismic hazards in this high-risk region. We present new three-dimensional P-wave and S-wave velocity (Vp and Vs) models of the SFB region developed using joint tomographic inversion with a rich set of earthquake and active-source body-wave data and ambient-noise surface-wave data. We designed a dynamic balance strategy to effectively balance the contributions of body-wave and surface-wave data during each iteration of the inversion. Owing to the complementary resolution of body-wave and surface-wave data, our new models are significantly improved compared to previous tomographic models. Major geologic features in the SFB region, including low-velocity basins, high-velocity Franciscan Complex, granite, and gabbro rocks, and across-fault velocity contrasts, are imaged in our Vp and Vs models. Compared to the geology-based U.S. Geological Survey velocity model, our new model has better defined structures for some important areas that are of great concern for seismic hazard assessment, such as the Sacramento-San Joaquin Delta, and the 2014 magnitude 6.0 South Napa earthquake area. We validated our model by simulating waveforms for a set of moderate-magnitude earthquakes. The good performance of our model in waveform simulation indicates its potential for improving ground motion simulation and seismic hazard assessment in the SFB region.

California