EXPLORE THE ARCHIVE

Alex R. Grant

Publications and source records attributed to Alex R. Grant.

8 recordsLinked to original sources

USGS2026

Simulation-based scenario ShakeMaps for large magnitude (MW6.5+) crustal earthquakes on the Seattle, Tacoma, and southern Whidbey Island faults, Washington, USA

Scenario ground‐motion maps based on empirical ground‐motion models (GMMs) provide a rapid and generally reliable means of estimating the amplitude and distribution of earthquake shaking. However, because GMMs are designed for broad applicability, they often rely on simplified representations of Earth structure, which can limit their accuracy in regions with complex source, path, and site effects. This can substantially impact the accuracy of predicted shaking in areas like western Washington State, where deep, interconnected basin structure exerts a strong influence on seismic‐wave propagation. In this study, we present a new suite of simulation‐based scenario ShakeMaps that characterize ground shaking from large‐magnitude ( ⁠ M W 6.5–7.5) earthquakes on the Seattle, Tacoma, and southern Whidbey Island faults. These maps are developed using results from recent 3D wave propagation simulations ( Stone et al. , 2022 , 2023 , 2025 ) that incorporate realistic rupture geometries, variable slip distributions, and a regional 3D seismic velocity model with shallow soils. Broadband ground motions are estimated by combining the low‐frequency (<1 Hz) deterministic seismograms from these studies with high‐frequency (1–10 Hz) stochastic seismograms. Simulated ground motions are corrected to account for the enforced minimum shear‐wave velocity and nonlinear site response. The resulting ShakeMaps represent median ground‐shaking estimates derived from multiple rupture scenarios with varying slip distributions and hypocenter locations for each fault. To extend ShakeMap coverage beyond the simulation domain (i.e., into eastern Washington, northern Oregon, and southwestern British Columbia), we scale GMM‐based ground‐motion estimates using amplification patterns observed in the simulations. These new ShakeMaps reveal the substantial influence of deep basin structure on shaking intensity, underscoring the importance of considering crustal structure complexity in regional hazard assessments for the Pacific Northwest.

Washington↗

USGS2026

Cascadia Subduction Zone science: Call for the next generation community seismic velocity model

The Cascadia subduction zone (CSZ) hosts major seismic and tsunami hazards, yet key questions persist about the relationship between margin structure, fluid distribution, episodic tremor and slip, shallow megathrust behavior, shaking and tsunamigenesis, and the resulting hazard estimates. Addressing these problems requires an empirically grounded, three‐dimensional seismic velocity model to illuminate subsurface structure and properties and to provide a basis for geophysical studies such as earthquake simulations and ground‐motion estimation. In May 2024, the National Science Foundation‐funded Cascadia Region Earthquake Science Center (CRESCENT) community velocity model (CVM) working group, with U.S. Geological Survey and regional partners, convened a workshop to identify priorities for such a model. Participants emphasized the features necessary for addressing key science questions, including implementing findability, accessibility, interoperability, and reusability (FAIR) access, capturing along‐strike and along‐dip structural heterogeneity, resolving shallow offshore–onshore structure, constraining elastic properties and quantifying their uncertainties for numerical wave propagation simulations, their validation benchmarks, and supporting associated accurate earthquake ground‐motion simulations and hazard assessments. This article describes the priorities defined in the workshop, and a description of how, guided by these needs, CRESCENT plans to develop multiple generations of a CVM to advance CSZ science and improve seismic and tsunami hazard modeling across the Pacific Northwest. The CVM will span the CSZ from the surface to ∼100 km depth, offshore and east of the Cascades into Idaho (∼132°–110° W) and the southern and northern tectonic regime transitions (∼36°–52° N) to capture the entire tectonic system as well as its surroundings.

Cascadia Subduction Zone↗

USGS2026

The damability function: A probabilistic approach to regional landslide dam susceptibility analysis applied to the Oregon Coast Range, USA

Landslides can dam rivers and require rapid response to mitigate catastrophic outburst floods. Here, we present a workflow to map landslide dam formation susceptibility at a regional scale. We define a probabilistic function that combines river valley width and landslide volume to efficiently determine the likelihood of a landslide dam or “damability”. We combine damability values with landslide susceptibility to estimate landslide dam susceptibility. The valley width measurements are automated using a new elevation threshold-based algorithm. Landslide volume is represented as a statistical distribution from mapped landslides. We validate and apply our approach to the Oregon Coast Range, USA and find that 36 % of river stretches exceed a dam potential threshold; these are in river headwaters and steeper terrain, which in this case correlate with more resistant lithologies. We also estimate volumes of the potential dammed lakes and find that most rivers with high dam susceptibility are less likely to impound large lakes because they have low drainage areas. However, widespread susceptibility, and the potential impacts from exceptionally large landslides, suggest that this hazard should be considered in the Pacific Northwest. The damability function workflow can ingest new data and be applied more broadly to assess future landslide dam hazards.

Oregon↗

USGS2026

Rapid characterization of the 2025 Mw 8.8 Kamchatka, Russia earthquake

The 29 July 2025 M w 8.8 Kamchatka, Russia, earthquake was the sixth largest instrumentally recorded earthquake. This event was seismically well observed at regional and teleseismic distances, but publicly available near‐source data were sparse at the time of the event, presenting unique challenges for rapid source and impact characterization. The U.S. Geological Survey (USGS) National Earthquake Information Center provides global real‐time monitoring for earthquakes, including rapid response information products that estimate source characteristics, shaking, and the resulting impacts. We describe the USGS rapid response earthquake information products following the Kamchatka event and discuss their implications for ongoing hazards in the region. We describe potential improvements to our response workflows motivated by this event, including more rapid constraints on source geometries and the automated selection of fault geometries for finite‐fault inversions. The rapid response products together support the interpretation of a unilateral southwestward rupture with significant slip on the southwestern end of the rupture extent. The M w 8.8–9.0 event in 1952, which ruptured a comparable extent of the Kuril–Kamchatka subduction interface, has many similarities to the 2025 rupture. This illustrates that slip deficits may remain following great earthquakes and highlights the usefulness of comparative studies between historic and modern events.

Kuril-Kamchatka subduction zone↗

USGS2025

High frequency and region-scale simulations of large (Mw7+) earthquakes on the southern Whidbey Island fault, Washington, USA

We simulate ground shaking in western Washington State from hypothetical M w 7.0–7.5 earthquakes on the southern Whidbey Island fault (SWIF). Ground motions are modeled considering kinematic source distributions on a complex fault plane, a 3D seismic velocity model, and region‐specific soil velocity models. We run simulations with varying model resolutions, including regional‐scale simulations with a maximum‐modeled frequency of ∼1 Hz and local‐scale simulations with a maximum‐modeled frequency of ∼2.5 Hz. Additional local‐scale simulations are run considering high‐resolution surface topography. We explore how source parameters (i.e., magnitude, hypocenter location, and dip direction) and 3D velocity structure impact peak shaking intensity and its variability. In particular, we find that earthquakes on the SWIF would likely produce strong shaking throughout the populated Puget Lowland, including in the cities of Everett, Seattle, Bellevue, and Tacoma, Washington. Simulated short‐period ( T ≤ 2 s) spectral accelerations are strong throughout the Puget Lowland, and long‐period shaking ( T ≥ 5 s) is strong in the deep regional sedimentary basins, especially the Everett and Seattle basins. Source parameters strongly influence intra‐ and interevent variability in response, primarily through changes in source and site geometry, as well as rupture directivity. We also note a potential coupling between rupture directivity and basin effects, wherein directivity pulses are seemingly guided through the region’s deep, interconnected sedimentary basins. Overall, this work highlights the impacts of 3D source, path, and site effects on seismic hazard in the U.S. Pacific Northwest and substantially expands the catalog of simulated ground motions for Puget Sound area crustal faults.

Washington↗

USGS2025

Earthquake probabilities and hazards in the U.S. Pacific Northwest

Earthquakes and their cascading consequences pose a significant threat to the people, environment, infrastructure, and economy of the U.S. Pacific Northwest. The Pacific Northwest is susceptible to three types of earthquakes: deep (intraslab) earthquakes, subduction zone (megathrust) earthquakes, and shallow crustal earthquakes. For each of these earthquake types, earth scientists can use a variety of methods to estimate the probability of occurrence for future events, which constrains seismic hazard and informs building codes. The timing of past earthquakes indicates that there is an 85-percent chance of a magnitude 6.5 or greater deep earthquake in the Puget Sound region; a 10-15-percent chance of an approximately magnitude 9 earthquake on the Cascadia Subduction Zone; and a 17-percent chance of a magnitude 6.5 or greater crustal fault earthquake in the Puget Sound region in the next 50 years. Individuals and communities can take simple steps to prepare for and reduce the impact of future earthquakes.

California, Oregon, Washington↗

USGS2025

Three-dimensional seismic velocity model for the Cascadia Subduction Zone with shallow soils and topography, version 1.7

The U.S. Geological Survey’s seismic velocity model for the Cascadia Subduction Zone provides P- and S-wave velocity ( V P and V S , respectively) information from 40.2° to 50.0° N. latitude and −129.0° to −121.0° W. longitude, and is used to support a variety of research topics, including three-dimensional (3D) earthquake simulations and seismic hazard assessment in the Pacific Northwest. This report describes an update to the previous version (v) 1.6 of the 3D seismic velocity model for the Cascadia Subduction Zone. This new model (herein referred to as v1.7) contains more detailed near-surface structure for improved earthquake ground motion modeling. Updated features include the addition of a new shallow soil velocity model in the top few hundred meters and the option of adding user-specified topography. Although v1.6 of the Cascadia seismic velocity model has a minimum V S of 600 meters per second (m/s), the new model (v1.7) has a minimum V S of approximately 40 m/s. Overall, this update will allow for more accurate ground motion estimates from 3D simulations of scenario earthquakes in the Cascadia Subduction Zone region.

British Columbia, California, Oregon, Washington↗

USGS2025

A soil velocity model for improved ground motion simulations in the U. S. Pacific Northwest

Near-surface seismic velocity structure may significantly impact the intensity, duration, and frequency content of ground shaking during an earthquake. In this study, we compile 649 shear wave velocity (Vs) profiles throughout the U.S. Pacific Northwest and southern British Columbia (PNW) and use these measured profiles to develop a representative soil velocity model for four major Holocene soil provinces: Puget Lowlands, Willamette Valley, fill and alluvium, and `other' soils. The resulting soil velocity model shows good agreement to measured data for a wide range of site conditions, with variability between different geologic domains reflecting fundamental differences in depositional environments. We then show that using this regional soil velocity model in simulations of the 2001 M6.8 Nisqually, Washington earthquake improves the fit to observed high-frequency (≥ 0.5 Hz) ground motions in the Puget Sound region compared to simulations that do not incorporate shallow (≤ 200 m) seismic velocity structure. Overall, this work shows that incorporating localized soil velocity profiles into seismic velocity models is important for accurately estimating high-frequency ground motion and regional seismic hazard in earthquake simulations. Future earthquake simulations and hazard studies in the PNW could incorporate these soil velocity profiles to capture the region's distinct site response characteristics.

Washington↗