SEARCH · Geology Reports

Results for “Environmental Geosciences”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 recordsLinked to original sources

USGS2005

Environmental issues of petroleum exploration and production: Introduction

Energy is the lifeblood of our planet Earth, an essential commod- ity that powers the expanding global economy. Starting in the 1950s, oil and natural gas became the main sources of primary energy for the increasing world population, and this dominance is expected to continue for several more decades (Edwards, 1997; Energy Information Administration (EIA), 2004). In the United States, petroleum production started in 1859 when Drake's well was drilled near Titusville, Pennsylvania, and oil and natural gas currently supply approximately 63% of the energy consumption; forecasts indicate that by 2025, their use will increase by about 40% to 28.3 million bbl/day and to 31.4 tcf/yr (EIA, 2004). The clear benefits of petroleum consumption, however, can carry major environmental impacts that may be regional or global in scale, in- cluding air pollution, global climate change, and oil spills. This vol- ume of Environmental Geosciences, covering environmental impacts of petroleum exploration and production, does not address these major impacts directly because air pollution and global warming are issues related primarily to petroleum and coal uses, and major oil spills are generally attributed to marine petroleum transportation, such as the Exxon Valdez's 1989 spill of 260,000 bbl of oil into Prince William Sound, Alaska. Exploration for and production of petroleum, however, have caused local detrimental impacts to soils, surface and groundwa- ters, and ecosystems in the 36 producing states in the United States (Richter and Kreitler, 1993; Kharaka and Hanor, 2003). These im- pacts arose primarily from the improper disposal of some of the large volumes (presently estimated at 20 billion bbl/yr total pro- duced) of saline water produced with oil and gas, from accidental hydrocarbon and produced-water releases, and from abandoned oil wells that were orphaned or not correctly plugged (Kharaka et al., 1995; Veil et al., 2004). Impacts and ground-surface disturbances, in the order of several acres per well, can also arise from related activities such as site clearance, construction of roads, tank bat- teries, brine pits and pipelines, and other land modifications nec- essary for the drilling of exploration and production wells and construction of production facilities. The cumulative impacts from these operations are high, because a total of about 3.5 million oil.

Environmental Geosciences↗

USGS2007

Geologic and anthropogenic factors influencing karst development in the Frederick region of Maryland

Karst features pervade the outcrop belts of Triassic, Ordovician, and Cambrian rocks in the Frederick Valley region of Maryland's western Piedmont. Detailed stratigraphic analysis and geologic and karst mapping demonstrate that individual stratigraphic units have differing susceptibilities of karst feature creation. Although the Triassic Leesburg Member of the Bull Run Formation and Rocky Springs Station Member of the Cambrian Frederick Formation have many surface depressions within their outcrop belts, the Lime Kiln Member of the Frederick Formation and the Ceresville, Fountain Rock, and Woodsboro members of the Ordovician Grove Formation have the greatest potential for development of catastrophic collapse sinkholes. Although these four members have the highest relative susceptibility, human activity can increase the potential for sinkhole activation in all units. Rerouting of surface drainage patterns, unlined drainage, and storm-water management areas and removal of significant overburden deposits significantly increase sinkhole development, but mainly, these units are inherently more susceptible to begin with. Copyright ?? 2007. The American Association of Petroleum Geologists/Division of Environmental Geosciences. All rights reserved.

Environmental Geosciences↗

USGS2010

Application of the surface azimuthal electrical resistivity survey method to determine patterns of regional joint orientation in glacial tills

Joints within unconsolidated material such as glacial till can be primary avenues for the flow of electrical charge, water, and contaminants. To facilitate the siting and design of remediation programs, a need exists to map anisotropic distribution of such pathways within glacial tills by determining the azimuth of the dominant joint set. The azimuthal survey method uses standard resistivity equipment with a Wenner array rotated about a fixed center point at selected degree intervals that yields an apparent resistivity ellipse. From this ellipse, joint set orientation can be determined. Azimuthal surveys were conducted at 21 sites in a 500-km2 (193 mi2) area around Milwaukee, Wisconsin, and more specifically, at sites having more than 30 m (98 ft) of glacial till (to minimize the influence of underlying bedrock joints). The 26 azimuthal surveys revealed a systematic pattern to the trend of the dominant joint set within the tills, which is approximately parallel to ice flow direction during till deposition. The average orientation of the joint set parallel with the ice flow direction is N77??E and N37??E for the Oak Creek and Ozaukee tills, respectively. The mean difference between average direct observation of joint set orientations and average azimuthal resistivity results is 8??, which is one fifth of the difference of ice flow direction between the Ozaukee and Oak Creek tills. The results of this study suggest that the surface azimuthal electrical resistivity survey method used for local in situ studies can be a useful noninvasive method for delineating joint sets within shallow geologic material for regional studies. Copyright ?? 2010 The American Association of Petroleum Geologists/Division of Environmental Geosciences. All rights reserved.

Environmental Geosciences↗

USGS2010

Use of the azimuthal resistivity technique for determination of regional azimuth of transmissivity

Many bedrock units contain joint sets that commonly act as preferred paths for the movement of water, electrical charge, and possible contaminants associated with production or transit of crude oil or refined products. To facilitate the development of remediation programs, a need exists to reliably determine regional-scale properties of these joint sets: azimuth of transmissivity ellipse, dominant set, and trend(s). The surface azimuthal electrical resistivity survey method used for local in situ studies can be a noninvasive, reliable, efficient, and relatively cost-effective method for regional studies. The azimuthal resistivity survey method combines the use of standard resistivity equipment with a Wenner array rotated about a fixed center point, at selected degree intervals, which yields an apparent resistivity ellipse from which joint-set orientation can be determined. Regional application of the azimuthal survey method was tested at 17 sites in an approximately 500 km2 (193 mi2) area around Milwaukee, Wisconsin, with less than 15m (50 ft) overburden above the dolomite. Results of 26 azimuthal surveys were compared and determined to be consistent with the results of two other methods: direct observation of joint-set orientation and transmissivity ellipses from multiple-well-aquifer tests. The average of joint-set trend determined by azimuthal surveys is within 2.5?? of the average of joint-set trend determined by direct observation of major joint sets at 24 sites. The average of maximum of transmissivity trend determined by azimuthal surveys is within 5.7?? of the average of maximum of transmissivity trend determined for 14 multiple-well-aquifer tests. Copyright ?? 2010 The American Association of Petroleum Geologists/Division of Environmental Geosciences. All rights reserved.

Environmental Geosciences↗

USGS2009

Assessing spatial uncertainty in reservoir characterization for carbon sequestration planning using public well-log data: A case study

Mapping and characterization of potential geologic reservoirs are key components in planning carbon dioxide (CO 2 ) injection projects. The geometry of target and confining layers is vital to ensure that the injected CO 2 remains in a supercritical state and is confined to the target layer. Also, maps of injection volume (porosity) are necessary to estimate sequestration capacity at undrilled locations. Our study uses publicly filed geophysical logs and geostatistical modeling methods to investigate the reliability of spatial prediction for oil and gas plays in the Medina Group (sandstone and shale facies) in northwestern Pennsylvania. Specifically, the modeling focused on two targets: the Grimsby Formation and Whirlpool Sandstone. For each layer, thousands of data points were available to model structure and thickness but only hundreds were available to support volumetric modeling because of the rarity of density-porosity logs in the public records. Geostatistical analysis based on this data resulted in accurate structure models, less accurate isopach models, and inconsistent models of pore volume. Of the two layers studied, only the Whirlpool Sandstone data provided for a useful spatial model of pore volume. Where reliable models for spatial prediction are absent, the best predictor available for unsampled locations is the mean value of the data, and potential sequestration sites should be planned as close as possible to existing wells with volumetric data. ?? 2009. The American Association of Petroleum Geologists/Division of Environmental Geosciences. All rights reserved.

Environmental Geosciences↗

USGS2009

Reservoir uncertainty, Precambrian topography, and carbon sequestration in the Mt. Simon Sandstone, Illinois Basin

Sequestration sites are evaluated by studying the local geological structure and confirming the presence of both a reservoir facies and an impermeable seal not breached by significant faulting. The Cambrian Mt. Simon Sandstone is a blanket sandstone that underlies large parts of Midwest United States and is this region's most significant carbon sequestration reservoir. An assessment of the geological structure of any Mt. Simon sequestration site must also include knowledge of the paleotopography prior to deposition. Understanding Precambrian paleotopography is critical in estimating reservoir thickness and quality. Regional outcrop and borehole mapping of the Mt. Simon in conjunction with mapping seismic reflection data can facilitate the prediction of basement highs. Any potential site must, at the minimum, have seismic reflection data, calibrated with drill-hole information, to evaluate the presence of Precambrian topography and alleviate some of the uncertainty surrounding the thickness or possible absence of the Mt. Simon at a particular sequestration site. The Mt. Simon is thought to commonly overlie Precambrian basement granitic or rhyolitic rocks. In places, at least about 549 m (1800 ft) of topographic relief on the top of the basement surface prior to Mt. Simon deposition was observed. The Mt. Simon reservoir sandstone is thin or not present where basement is topographically high, whereas the low areas can have thick Mt. Simon. The paleotopography on the basement and its correlation to Mt. Simon thickness have been observed at both outcrops and in the subsurface from the states of Illinois, Ohio, Wisconsin, and Missouri. ?? 2009. The American Association of Petroleum Geologists/Division of Environmental Geosciences. All rights reserved.

Environmental Geosciences↗

USGS2007

Geologic characteristics of the central stretch of the Ticona Channel, north-central Illinois

The Ticona Channel is located in north-central Illinois and occurs in Grundy, LaSalle, and Putnam counties. It is a buried bedrock valley that served as the principal paleodrainage system in north-central Illinois during the Illinoian and pre-Illinoian. This study focused on the part of the Ticona Channel within the Leonore 7.5??? Quadrangle. The geometry and stratigraphy of sediments that fill the Ticona Channel were investigated using high-resolution, shallow seismic reflection profiling, traditional field geologic mapping techniques, borehole data, and water-well-log data. The valley is about 2 km (1 mi) wide and approximately 60 m (200 ft) deep. The U-shape channel is straight, trends east-west, and has only one mappable tributary. The valley is carved into the Pennsylvanian Carbondale Formation in the eastern part of the study area; it has incised into the Ordovician Prairie du Chien Group in the west. At its base, the Ticona Channel is filled with the Pearl Formation, which is coarse-grained sand and gravel that was deposited during the Illinoian glaciation. The Pearl Formation is overlain by Illinoian till of the Glasford Formation and is capped by Wedron Group sediments from the Wisconsinan stage. Copyright ?? 2007. The American Association of Petroleum Geologists/Division of Environmental Geosciences. All rights reserved.

Environmental Geosciences↗

USGS2008

Citronelle Dome: A giant opportunity for multizone carbon storage and enhanced oil recovery in the Mississippi Interior Salt Basin of Alabama

The Citronelle Dome is a giant, salt-cored anticline in the eastern Mississippi Interior Salt Basin of southern Alabama that is located near several large-scale, stationary, carbon-emitting sources in the greater Mobile area. The dome forms an elliptical, four-way structural closure containing opportunities for CO2-enhanced oil recovery (CO2-EOR) and large-capacity saline reservoir CO2 sequestration. The Citronelle oil field, located on the crest of the dome, has produced more than 169 million bbl of 42-46?? API gravity oil from sandstone bodies in the Lower Cretaceous Rodessa Formation. The top seal for the oil accumulation is a thick succession of shale and anhydrite, and the reservoir is underfilled such that oil-water contacts are typically elevated 30-60 m (100-200 ft) above the structural spill point. Approximately 31-34% of the original oil in place has been recovered by primary and secondary methods, and CO2-EOR has the potential to increase reserves by up to 20%. Structural contour maps of the dome demonstrate that the area of structural closure increases upward in section. Sandstone units providing prospective carbon sinks include the Massive and Pilot sands of the lower Tuscaloosa Group, as well as several sandstone units in the upper Tuscaloosa Group and the Eutaw Formation. Many of these sandstone units are characterized by high porosity and permeability with low heterogeneity. The Tuscaloosa-Eutaw interval is capped by up to 610 m (2000 ft) of chalk and marine shale that are proven reservoir seals in nearby oil fields. Therefore, the Citronelle Dome can be considered a major geologic sink where CO2 can be safely stored while realizing the economic benefits associated with CO2-EOR. Copyright ?? 2008. The American Association of Petroleum Geologists/Division of Environmental Geosciences. All rights reserved.

Environmental Geosciences↗

USGS2009

Characterization of the Helderberg Group as a geologic seal for CO 2 sequestration

The Midwest Regional Carbon Sequestration Partnership recognizes that both the Devonian Oriskany Sandstone and the Silurian Salina Group offer potential for subsurface carbon dioxide storage in northern West Virginia. The Silurian-Devonian Helderberg Group lies stratigraphically between these two units, and consequendy, its potential as a geologic seal must be evaluated. Predominantly a carbonate interval with minor interbedded siliciclastics and chert, the Helderberg Group was deposited in an ancient epeiric sea. Although most previous investigations of this unit have concentrated on outcrops in eastern West Virginia, new information is available from an injection well drilled along the Ohio River at First Energy's R. E. Burger electric power plant near Shadyside, Ohio. Geophysical, seismic, and core data from this well have been combined with existing outcrop information to evaluate the Helderberg Group's potential as a seal. The data collected suggest that only secondary porosity remains, and permeability, if it exists, most likely occurs along faults or within fractures. ?? 2009. The American Association of Petroleum Geologists/Division of Environmental Geosciences. All rights reserved.

Environmental Geosciences↗

USGS2014

Geomorphological Fieldwork

Geomorphological Fieldwork addresses a topic that always remains popular within the geosciences and environmental science. More specifically, the volume conveys a growing legacy of field-based learning for young geomorphologists that can be used as a student book for field-based university courses and postgraduate research requiring fieldwork or field schools. The editors have much experience of field-based learning within geomorphology and extend this to physical geography. The topics covered are relevant to basic geomorphology as well as applied approaches in environmental and cultural geomorphology. The book integrates a physical-human approach to geography, but focuses on physical geography and geomorphology from an integrated field-based geoscience perspective.

Book↗

USGS2024

Hypothetical CO2 leakage into, and hydrological plume management within, an underground source of drinking water at a proposed CO2 storage facility, Kemper County, Mississippi, USA

A large Geologic Carbon Sequestration (GCS) hub has been proposed in Kemper County, Mississippi. The target injection interval consists of numerous Cretaceous-aged deep saline aquifers overlain by a competent and extensive regional sealing layer. Above the seal, the deepest Underground Source of Drinking Water (USDW) at the site is the Eutaw aquifer of the Eutaw Group and McShan Formation, undifferentiated. To assess potential risks of leakage from the deep sequestration reservoir, a model of a portion of the Cretaceous Eutaw Group was constructed in this study. Simulations tested various permeabilities, hypothetical leakage rates, and plume mitigation strategies utilizing existing wells. Results suggest that, under the influence of regional groundwater flow fields, leaking CO 2 would effectively bypass the existing wells, and to influence this migration would require very large water extraction rates. Therefore, to ensure plume detection, monitoring for leakage at the injection wells themselves is very important.

Mississippi↗

USGS2000

Monitoring beach morphology changes using small-format aerial photography and digital softcopy photogrammetry

Current methods of monitoring beach morphology changes commonly involve the establishment of Global Positioning System profiles that are surveyed on a regular basis. Although this method produces precise measurements of coastal topography, it is costly in time and effort and may result in large data gaps between profiles. Much of our understanding of coastal dynamics is thus limited by profile spacing and survey frequency. Softcopy photogrammetry is increasingly being used as an alternative to assess shoreline change and study beach morphodynamics. This method of producing three-dimensional topographic models and orthophotographs from digitized aerial photography can aid in filling in the gaps between established profiles. A limiting factor to this technology is the cost of obtaining high-resolution aerial photography. We have developed an aerial mapping system designed to collect data in an efficient and cost-effective way. We use a small-format aerial photography system that can be mounted on a variety of small aircraft on short notice. After a flight, the photographs are scanned, and softcopy photogrammetry software is used to create both DTMs (Digital Terrain Models) and orthophotographs. The DTMs can be compared with existing profiles for accuracy, and volumetric changes can be computed. The orthophotos are used to make precise measurements of the position and morphology of shoreline features. This aerial mapping system is advantageous over previous methods of beach morphology change monitoring because it allows for rapid response to storm events and provides a cost-effective method of establishing a continual monitoring program in erosion hazard areas.

Environmental Geosciences↗

USGS2000

Radar structure of earthquake-induced, coastal landslides in Anchorage, Alaska

Ground-penetrating radar (GPR) was used to investigate the internal structure of two large landslides in Anchorage, Alaska that resulted from the great 1964 earthquake. The Government Hill and Turnagain Heights landslides occurred in similar stratigraphic and geographic settings, yet the style of ground deformation is different at each site. GPR data are compared with previous investigations and are shown, under certain conditions, to have utility in the identification of ancient landslides. Reflection surveys accurately reproduced the subsurface geometry of horst and graben structures and imaged finer scale features such as ground cracks and fissures. Where more complete disintegration of the bluff occurred, GPR reflections from within the slide mass are generally chaotic and include no recognizable evidence of the original stratigraphy. Common midpoint surveys estimated GPR velocity in the sediment and allowed the conversion of travel times to depths.

Alaska↗

USGS2001

Coastal-zone hazard maps and recommendations: Eastern Puerto Rico

A series of coastal zone hazard maps cover the area impacted by Hurricane Hugo (1989) in eastern Puerto Rico. The mapping strategy was to develop a tool for quick visualization of multiple hazards for use by coastal planners, managers, property owners, and potential property owners. The Puerto Rico shoreline is heavily developed in places and also highly compartmentalized in terms of shoreline types, geology, and adjacent shelf conditions. Hazards such as coastal erosion, storm surge, riverine flooding, landsliding, and seismic impact also may be compartmentalized. From a management perspective, resources therefore can be allocated on a compartment-by-compartment basis. Six types of hazards were considered in this investigation: (1) shoreline-setting hazards (long-term coastal problems), (2) marine hazards (short-term impacts of coastal storms), (3) earthquake and slope hazards (ground shaking, landslides, and liquefaction), (4) riverine hazards (historical floods), (5) development hazards (high-density development at risk or lowdensity development in extreme-hazard settings), and (6) engineering hazards (special cases in which shoreline engineering projects such as breakwaters or sand mining have significant detrimental effects on portions of the shoreline). Shoreline segments were ranked as being at extreme, high, moderate, or low risk, depending on the number of hazards present within that segment. These rankings are likely to change, gradually over decades with natural coastal evolution, more rapidly as human development infringes on the coastal zone, or in an instant during a severe storm. The hazard maps provide a basis for hazard mitigation and management recommendations.

Puerto Rico↗

USGS2019

Groundwater salinity and the effects of produced water disposal in the Lost Hills-Belridge oilfields, Kern County, California

Increased oil and gas production in many areas has led to concerns over the effects these activities may be having on nearby groundwater quality. In this study we determine the lateral and vertical extent of groundwater with less than 10,000 milligrams per liter (mg/l) total dissolved solids (TDS) near the Lost Hills-Belridge oilfields in northwestern Kern County, California and document evidence of impacts by produced water disposal within the Tulare aquifer and overlying alluvium—the primary protected aquifers in the area. The depth at which groundwater salinity surpasses 10,000 mg/l ranges from 150 m (500 ft [ft]) in the northwestern part of the study area to 490 to 550 m (1,600-1,800 ft) in the south and east respectively as determined by geophysical log analysis and lab analysis of produced water samples. Comparison of logs from replacement wells with logs from their older counterparts shows relatively higher resistivity intervals representing the vadose zone or fresher groundwater being replaced by intervals with much lower resistivity due to infiltration of brines from surface disposal ponds and injection of brines into disposal wells. The effect of the surface ponds is confined to the alluvial aquifer—the underlying Tulare aquifer is largely protected by a regional clay layer at the base of the alluvium. Sand layers affected by injection of produced waters in nearby disposal wells often exhibit log resistivity profiles that change from high resistivity in their upper parts to low resistivity near the base due to stratification by gravity segregation of the denser brines within each affected sand. The effects of produced water injection are mainly evident within the Tulare Formation and can be noted as far as 550 m (1,800 ft) from the main group of disposal wells located along the east flank of South Belridge.

California↗

USGS2011

Tracking solutes and water from subsurface drip irrigation application of coalbed methane-produced waters, Powder River Basin, Wyoming

One method to beneficially use water produced from coalbed methane (CBM) extraction is subsurface drip irrigation (SDI) of croplands. In SDI systems, treated CBM water (injectate) is supplied to the soil at depth, with the purpose of preventing the buildup of detrimental salts near the surface. The technology is expanding within the Powder River Basin, but little research has been published on its environmental impacts. This article reports on initial results from tracking water and solutes from the injected CBM-produced waters at an SDI system in Johnson County, Wyoming. In the first year of SDI operation, soil moisture significantly increased in the SDI areas, but well water levels increased only modestly, suggesting that most of the water added was stored in the vadose zone or lost to evapotranspiration. The injectate has lower concentrations of most inorganic constituents relative to ambient groundwater at the site but exhibits a high sodium adsorption ratio. Changes in groundwater chemistry during the same period of SDI operation were small; the increase in groundwater-specific conductance relative to pre-SDI conditions was observed in a single well. Conversely, groundwater samples collected beneath another SDI field showed decreased concentrations of several constituents since the SDI operation. Groundwater-specific conductance at the 12 other wells showed no significant changes. Major controls on and compositional variability of groundwater, surface water, and soil water chemistry are discussed in detail. Findings from this research provide an understanding of water and salt dynamics associated with SDI systems using CBM-produced water.

Wyoming↗

USGS2009

Unraveling the stratigraphy of the Oriskany Sandstone: A necessity in assessing its site-specific carbon sequestration potential

The widespread distribution, favorable reservoir characteristics, and depth make the Lower Devonian Oriskany Sandstone a viable sequestration target in the Appalachian Basin. The Oriskany Sandstone is thickest in the structurally complex Ridge and Valley Province, thins toward the northern and western basin margins, and is even absent in other parts of the basin (i.e., the no-sand area of northwestern Pennsylvania). We evaluated four regions using petrographic data, core analyses, and geophysical log analyses. Throughout the entire study area, average porosities range from 1.35 to 14%. The most notable porosity types are primary intergranular, secondary dissolution, and fracture porosity. Intergranular primary porosity dominates at stratigraphic pinch-out zones near the Oriskany no-sand area and at the western limit of the Oriskany Sandstone. Secondary porosity occurs from dissolution of carbonate constituents primarily in the combination-traps natural gas play extending through western Pennsylvania, western West Virginia, and eastern Ohio. Fracture porosity dominates in the central Appalachian Plateau Province and Valley and Ridge Province. Based on average porosity, the most likely regions for successful sequestration in the Oriskany interval are (1) updip from Oriskany Sandstone pinch-outs in eastern Ohio, and (2) western Pennsylvania, western West Virginia, and eastern Ohio where production occurs from a combination of stratigraphic and structural traps. Permeability data, where available, were used to further evaluate the potential of these regions. Permeability ranges from 0.2 to 42.7 md. Stratigraphic pinch-outs at the northern and western limits of the basin have the highest permeabilities. We recommend detailed site assessments when evaluating the sequestration potential of a given injection site based on the variability observed in the Oriskany structure, lithology, and reservoir characteristics. ?? 2009. The American Association of Petroleum Geologists/Division of Environmental Ceosciences. All rights reserved.

Environmental Geosciences↗

USGS2011

Depositional and diagenetic variability within the Cambrian Mount Simon Sandstone: Implications for carbon dioxide sequestration

The Cambrian Mount Simon Sandstone is the major target reservoir for ongoing geologic carbon dioxide (CO 2 ) sequestration demonstrations throughout the midwest United States. The potential CO 2 reservoir capacity, reactivity, and ultimate fate of injected CO 2 depend on textural and compositional properties determined by depositional and diagenetic histories that vary vertically and laterally across the formation. Effective and efficient prediction and use of the available pore space requires detailed knowledge of the depositional and diagenetic textures and mineralogy, how these variables control the petrophysical character of the reservoir, and how they vary spatially. Here, we summarize the reservoir characteristics of the Mount Simon Sandstone based on examination of geophysical logs, cores, cuttings, and analysis of more than 150 thin sections. These samples represent different parts of the formation and depth ranges of more than 9000 ft ( 2743 m) across the Illinois Basin and surrounding areas. This work demonstrates that overall reservoir quality and, specifically, porosity do not exhibit a simple relationship with depth, but vary both laterally and with depth because of changes in the primary depositional facies, framework composition (i.e., feldspar concentration), and diverse diagenetic modifications. Diagenetic processes that have been significant in modifying the reservoir include formation of iron oxide grain coatings, chemical compaction, feldspar precipitation and dissolution, multiple generations of quartz overgrowth cementation, clay mineral precipitation, and iron oxide cementation. These variables provide important inputs for calculating CO 2 capacity potential, modeling reactivity, and are also an important baseline for comparisons after CO 2 injection.

Indiana↗