Geology Reports⌕ Search
Home/Archive/USGS

USGS · 70035523

Tracking solutes and water from subsurface drip irrigation application of coalbed methane-produced waters, Powder River Basin, Wyoming

Mark A. Engle·Carleton R. Bern·Richard W. Healy·J.I. Sams·J.W. Zupancic·K.T. Schroeder
View original source ↗Export metadata ↓

Abstract

One method to beneficially use water produced from coalbed methane (CBM) extraction is subsurface drip irrigation (SDI) of croplands. In SDI systems, treated CBM water (injectate) is supplied to the soil at depth, with the purpose of preventing the buildup of detrimental salts near the surface. The technology is expanding within the Powder River Basin, but little research has been published on its environmental impacts. This article reports on initial results from tracking water and solutes from the injected CBM-produced waters at an SDI system in Johnson County, Wyoming. In the first year of SDI operation, soil moisture significantly increased in the SDI areas, but well water levels increased only modestly, suggesting that most of the water added was stored in the vadose zone or lost to evapotranspiration. The injectate has lower concentrations of most inorganic constituents relative to ambient groundwater at the site but exhibits a high sodium adsorption ratio. Changes in groundwater chemistry during the same period of SDI operation were small; the increase in groundwater-specific conductance relative to pre-SDI conditions was observed in a single well. Conversely, groundwater samples collected beneath another SDI field showed decreased concentrations of several constituents since the SDI operation. Groundwater-specific conductance at the 12 other wells showed no significant changes. Major controls on and compositional variability of groundwater, surface water, and soil water chemistry are discussed in detail. Findings from this research provide an understanding of water and salt dynamics associated with SDI systems using CBM-produced water.

Explore related subjects

Environmental GeosciencesArticle
90° N90° S · 180° W ← longitude → 180° E
Source-reported bounding extent: 42.17968819665961° to 45.01918507438176° latitude; -107.325439453125° to -104.073486328125° longitude. This indicates report coverage, not an exact sampling location. View area on OpenStreetMap.

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Mark A. Engle, Carleton R. Bern, Richard W. Healy, J.I. Sams, J.W. Zupancic, K.T. Schroeder. 2011. Tracking solutes and water from subsurface drip irrigation application of coalbed methane-produced waters, Powder River Basin, Wyoming. https://doi.org/10.1306/eg.03031111004

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related USGS reports

USGS2024

Hypothetical CO2 leakage into, and hydrological plume management within, an underground source of drinking water at a proposed CO2 storage facility, Kemper County, Mississippi, USA

A large Geologic Carbon Sequestration (GCS) hub has been proposed in Kemper County, Mississippi. The target injection interval consists of numerous Cretaceous-aged deep saline aquifers overlain by a competent and extensive regional sealing layer. Above the seal, the deepest Underground Source of Drinking Water (USDW) at the site is the Eutaw aquifer of the Eutaw Group and McShan Formation, undifferentiated. To assess potential risks of leakage from the deep sequestration reservoir, a model of a portion of the Cretaceous Eutaw Group was constructed in this study. Simulations tested various permeabilities, hypothetical leakage rates, and plume mitigation strategies utilizing existing wells. Results suggest that, under the influence of regional groundwater flow fields, leaking CO 2 would effectively bypass the existing wells, and to influence this migration would require very large water extraction rates. Therefore, to ensure plume detection, monitoring for leakage at the injection wells themselves is very important.

Mississippi↗
USGS2020

Modeling geologic sequestration of carbon dioxide in a deep saline carbonate reservoir with TOUGH2–ChemPlugin, a new tool for reactive transport modeling

This paper outlines the development and demonstration of a new tool, TOUGH2–ChemPlugin (T2CPI) for predicting rock–water–CO 2 interaction following injection of supercritical CO 2 into a heterogeneous carbonate system. Specifically, modeling capabilities of TOUGH2, which examines multiphase flow and supercritical CO 2 behavior, were combined with the geochemical modeling capabilities of The Geochemist’s Workbench ® (GWB), using ChemPlugin TM . ChemPlugin is a self-linking re-entrant software object that, when coupled to a transport simulator, retains the flow and transport capabilities of the simulator but enables incorporation of reactive chemistry via GWB. To test and assess the capabilities of T2CPI, results from T2CPI simulations were compared to those of TOUGHREACT, using the same carbonate reservoir parameters (based on the Dollar Bay Formation of the South Florida Basin). Overall, results of simulations from TOUGHREACT and T2CPI were very similar for nearly all evaluated parameters. Dissimilarities between the two programs included qualitative differences in how TOUGHREACT and T2CPI predicted calcite dissolution and the subsequent spatial pattern of the porosity gain caused by how each handles evaporation of water near the injection point. The TOUGHREACT program is a proven, widely used tool for evaluating CO 2 –brine–rock interaction following supercritical CO 2 injection. The T2CPI tool offers similar capabilities and strengths of TOUGHREACT, with the ability to read in and use databases for a wide range of activity coefficient types. This program also has abilities to use a wide range of kinetic constraints, define those kinetic constraints with scripts or compiled libraries, account for colloidal transport, and/or account for a wide range of surface sorption models.

Florida↗
USGS2019

Groundwater salinity and the effects of produced water disposal in the Lost Hills-Belridge oilfields, Kern County, California

Increased oil and gas production in many areas has led to concerns over the effects these activities may be having on nearby groundwater quality. In this study we determine the lateral and vertical extent of groundwater with less than 10,000 milligrams per liter (mg/l) total dissolved solids (TDS) near the Lost Hills-Belridge oilfields in northwestern Kern County, California and document evidence of impacts by produced water disposal within the Tulare aquifer and overlying alluvium—the primary protected aquifers in the area. The depth at which groundwater salinity surpasses 10,000 mg/l ranges from 150 m (500 ft [ft]) in the northwestern part of the study area to 490 to 550 m (1,600-1,800 ft) in the south and east respectively as determined by geophysical log analysis and lab analysis of produced water samples. Comparison of logs from replacement wells with logs from their older counterparts shows relatively higher resistivity intervals representing the vadose zone or fresher groundwater being replaced by intervals with much lower resistivity due to infiltration of brines from surface disposal ponds and injection of brines into disposal wells. The effect of the surface ponds is confined to the alluvial aquifer—the underlying Tulare aquifer is largely protected by a regional clay layer at the base of the alluvium. Sand layers affected by injection of produced waters in nearby disposal wells often exhibit log resistivity profiles that change from high resistivity in their upper parts to low resistivity near the base due to stratification by gravity segregation of the denser brines within each affected sand. The effects of produced water injection are mainly evident within the Tulare Formation and can be noted as far as 550 m (1,800 ft) from the main group of disposal wells located along the east flank of South Belridge.

California↗