Geology Reports⌕ Search

SEARCH · Geology Reports

Results for “Sedimentary Geology”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,711 records · Page 95Linked to original sources

Geology and hydrology of the Fort Belknap Indian Reservation, Montana

The Fort Belknap Indian Reservation includes an area of 970 square miles in north-central Montana. At its north edge is the Milk River valley, which is underlain by Recent alluvium of the Milk River, glacial deposits, and alluvial deposits of the preglacial Missouri River, which carved and occupied this valley before the Pleistocene Epoch. Rising gently to the south is an undulating glaciated plain broken only by three small syenite porphyry intrusions. Underlying the glacial till of the plain are Upper Cretaceous shale and sandstone of the Bearpaw and Judith River Formations. At the south end of the reservation, 40 miles from the Milk River, an intrusion of syenite porphyry in Tertiary time uplifted, tilted, and exposed the succession of sedimentary rocks overlying the Precambrian metamorphic basement. The sedimentary rocks include 1,000 feet of sandstone and shale of Cambrian age; 2,000 feet of limestone and dolomite of Ordovician, Devonian, and Mississippian age; 400 feet of shale and limestone of Jurassic age; and 3,500 feet of sandstone, siltstone, and shale of Cretaceous age. Extensive gravel terraces of Tertiary and Quaternary age bevel the upturned bedrock formations exposed around the Little Rocky Mountains. Ground water under water-table conditions is obtained at present from alluvium, glaciofluvial deposits, and the Judith River Formation. The water table ranges in depth from a few feet beneath the surface in the Milk River valley alluvium to more than 100 feet deep in the Judith River Formation. Yields to wells are generally low but adequate for domestic and stock-watering use. Quality of the water ranges from highly mineralized and unusable to excellent; many wells in the Milk River valley have been abandoned because of the alkalinity of their water. Potential sources of additional ground-water supplies are the alluvial gravel of creeks issuing from the Little Rocky Mountains and some extensive areas of terrace gravel. The uplift and tilting of the sedimentary sequence around the Little Rocky Mountains and the minor intrusions in the central plain have created artesian conditions within aquifers. Wells obtain artesian water from sandstone aquifers in the Judith River, Eagle, and Kootenai Formations. Other potential aquifers, near their outcrop areas, are the Ellis Group and the Mission Canyon Limestone. Most wells that flow at the surface have small yields, but discharges of as much as 150 gallons per minute have been noted. Quality of artesian water ranges from poor to good. Well depths range from less than 50 to more than 300 feet.

Water Supply Paper↗

Detailed lithologic log of the Dow Chemical #1 B.L. Garrigan Drill Hole, Mississippi County, Arkansas

The geology and tectonic setting of the New Madrid region in southeastern Missouri has received considerable attention because of the area's high seismic activity. The largest recorded earthquakes in this area occurred in the winter of 1811-1812. These earthquakes has estimated magnitudes as large as 8.0 on the Richter scale (Johnsonton and Kanter, 1990) and affected an area of about 1 million square miles (Fuller, 1912). Today, an area of continuously high seismic activity defines the New Madrid seismic zone, which extends from northeastern Arkansas into southeastern Missouri and northwestern Tennessee. Seismicity is locally concentrated along two subsurface archers--the Blytheville and Pascola (Hildenbrand and others, 1977; Crone and others, 1985; Hildenbrand, 1985; McKeown, 1988). The Padcola arch is not pertinent to this study and, therefore will not be discusses further. The Blytheville arch is located in and is subparallel to the axis of the northeast-southwest-trending Reelfoot structural basin, which formed during early Paleozoic rifting (Ervin and McGinnis, 1975; fig. 1). The Reelfoot basin is filled with Cambrian and Ordovician sedimentary rocks (Grohskopf, 1955; Howe, 1984; Houseknevht, 1989; Collins and others, 1992) that are uncomfortably overlain by Cretacaous and Tertiary sedimentary rocks and underlain by crystalline rocks of the eastern granite-rhyolite province (see Bickford and others, 1986). The presence of some Late Proterozoic sedimentary rocks in the Reelfoot basin currently cannot be ruled out. The Dow Chemical #1 B.L. Garrigan drill hole (hereafter, Garrigan) penetrated Paleozoic rocks on the Blytheville arch. The Garrigan is locted in the Reelfoot basin in the NW1/4, NW1/4 sec. 28, T. 15 N., R. 10 E., Mississippi County, Arkansas (fig. 1) and was completed to a total depth of 12,038 ft from a ground elevation of 239 ft on April 11, 1982 (Swolfs, 1991). The Garrigan is the only reported drill hole that penetrates the subsurface Blytheville arch and is an important source of core from the Reelfoot basin (Collins and others, 1992). Therefore, this drill hole is important for understanding structure and Paleozoic stratigraphy in a basin where stratigraphic and structural data are sparse. Rocks in the Garrigan were originally logged and described by J.R. Howe (personal communication to D.S. Collins, 1990) and published as a composite stratigraphic section along with the rock description for the Dow Chemical #1 Wilson drill hole (Howe, 1984). F.A. McKeown later relogged the rocks in the Garrigan and presented a generalized log in McKeown and others (1990). Swolfs (1991) presented another version of the Garrigan drill-hole geologic section (fig. 2). Aided by new biostratigraphic information, Taylor and others (1991) corrected major errors in the characterization and correlation of rocks in the Garrigan (fig. 2). Collins (1991) described the insoluble residues from the cuttings of the Garrigan, but could not correlate them with the insoluble resides from rocks of the carbonate platform west of the basin. However Taylor and others (1991), Collins and others (1992), and Collins and Bohm (1993) did correlate fossils from the Garrigan to other drill holes in the Reelfoot basin and adjacent areas. Using these correlated data, Collins and Bohm (1993) provided information on the structural relief across a part of the Reelfoot basin. Collins and others (1992) also interpreted the depositional setting for the Paleozoic rocks of the Garrigan. This report presents a detailed lithologic log of the Paleozoic rocks penetrated by the Garrigan that differs from the lithologic logs of previous workers (Howe, 1984; McKeown and others, 1990; see also Dart, 1992, p. 18-19). The lithologic descriptions of the Garrigan are derived from observations of well cuttings and core. Cored intervals used were 11,426-11,402 ft, 10,229-10,200 ft, and 8,002-7,979 ft. These intervals were the only intervals cored during the Garrigan drill project. Detailed analyses of the core will be described in a subsequent report.

Arkansas↗

Isotopic evidence for early Proterozoic age of the Idono Complex, west-central Alaska

The Idono Complex of west-central Alaska is a fault-bounded, fragment of Early Proterozoic continental crust surrounded by overlap assemblages and younger terranes accreted in Mesozoic time. It is composed of granitic to dioritic orthogneiss, amphibolite, and metasedimentary rocks. Trace element compositions of the granitoids and amphibolite suggest rock formation in a subduction-related volcanic arc terrain. Nine zircon fractions from three samples of granitoid orthogneiss define a U-Pb discordia line intersecting concordia at and . The upper and lower intercepts are interpreted, respectively, as approximations of the time of granitoid crystallization and major episodic Pb-loss. The lower intercept age is similar to that indicated by some hornblende and biotite K-Ar ages. Other biotite, hornblende, and white mica K-Ar ages record later isotopic disturbance in Early Cretaceous time. Nd isotopic compositions at 2.06 Ga for tonalite orthogneiss ( ) and amphibolite ( and +2.3) indicate that Early Proterozoic crust formation in the Idono Complex involved significant additions of mantle-derived magma. These rocks yield (depleted mantle) model ages of 2.0 to 2.1 Ga, similar to the U-Pb zircon upper intercept age. Involvement of Archean crust in the formation of at least some rocks of the Idono Complex is indicated by a granitic orthogneiss ( ), which yields a model age of 2.5 Ga. The ~2.06-Ga age of the Idono Complex is similar to that indicated for provenance(s) of widely distributed sedimentary rocks in western North America and may represent a fragment of the North American craton displaced by northward movement of the Pacific plate. At such, rocks of the Idono Complex may provide important insights into both Early Proterozoic evolution along the craton margin, and subsequent displacements.

Journal of Geology↗

Patterns and origin of radial dike swarms associated with West Spanish Peak and Dike Mountain, south-central Colorado

West Spanish Peak and Dike Mountain in south-central Colorado are stocks which cut Tertiary sedimentary rocks near the axis of the La Veta syncline, the structural trough of the Raton basin. Associated with these stocks are radial dike swarms . The outline of the West Spanish Peak dike swarm is elliptical. The Dike Mountain swarm is more radial , and its outline is oval. Both systems are elongated normal to the axis of the La Veta syncline. The dikes of the West Spanish Peak swarm are of diverse rock types and represent several separate magmatic phases. Those of the Dike Mountain swarm are facies of syenodiorite and probably represent a single phase of magmatic invasion. The dikes occupy vertical joints that have been generally attributed to radial fissuring during doming of the sedimentary rocks by the emplacement of the stocks. Structural studies, however, indicate that several systems of shear and tension joints resulted from intermittent orogenic stresses of varying direction and magnitude during folding of the syncline before invasion of the magmas, and the writer suggests that selective intrusion into this joint complex accounts for the dike patterns .

Colorado↗

The quicksilver deposits of the Terlingua region, Texas

Texas is second among quicksilver-producing States because of the Terlingua region, in the Big Bend of the Rio Grande. This region contains Cretaceous strata, largely calcareous, which grade upward into Tertiary volcanics, locally without break. The strata are cut by numerous intrusions, largely alkalic, and are extensively folded and faulted.Many of the lodes are near the base of the impervious Del Rio clay, some at higher horizons, and a few in intrusive masses. The solutions penetrated only along open passageways, such as major fractures or joints in zones of tension, and, especially at horizons above the Del Rio, in fractures related to fault zones.The quicksilver is believed to have been brought in by alkali sulphide solutions. Most other constituents that may once have been present in the solutions had been separated earlier. Precipitation resulted largely from mingling with groundwater. The comparatively low temperature and pressure at the shallow levels where groundwater was present aided the precipitation. As the then-existing zone of groundwater circulation has since been partly exposed by erosion, the lodes are necessarily rather close to the present surface. The gangue minerals, particularly the calcite, are believed to have been derived mainly from the sedimentary rocks with some addition of material from deep sources. The relation of the widespread bitumen to genesis is puzzling here, as in many other quicksilver deposits. Weathering is of slight economic importance. Many minerals that resemble supergene products, including the quicksilver chlorides, are thought to have resulted here from original deposition within the zone of vadose water.

Texas↗

The Chesapeake Bay bolide: Modern consequences of an ancient cataclysm

During the late Eocene, the formerly quiescent geological regime of the Virginia Coastal Plain was dramatically transformed when a bolide struck in the vicinity of the Delmarva Peninsula, and produced the following principal consequences: The bolide carved a roughly circular crater twice the size of the state of Rhode Island (~6400 km 2) , and nearly as deep as the Grand Canyon (1.3 km deep). The excavation truncated all existing ground water aquifers in the impact area by gouging ~4300 km 3 of rock from the upper lithosphere, including Proterozoic and Paleozoic crystalline basement rocks and Middle Jurassic to upper Eocene sedimentary rocks. A structural and topographic low formed over the crater. The impact crater may have predetermined the present-day location of Chesapeake Bay. A porous breccia lens, 600-1200 m thick, replaced local aquifers, resulting in ground water ~1.5 times saltier than normal sea water. Long-term differential compaction and subsidence of the breccia lens spawned extensive fault systems in the area, which are potential hazards for local population centers in the Chesapeake Bay area.

Chesapeake Bay↗

Surficial geologic map and geodatabase of the Cuddeback Lake 30' x 60' quadrangle, San Bernardino and Kern Counties, California

A USGS surficial geologic mapping project, focused on the arid Southwest USA, conducted mapping and process studies to investigate landscape development and tectonic evolution. This project included the Cuddeback Lake 1:100,000-scale quadrangle located in the western Mojave Desert north-northeast of Los Angeles, between the southern Sierra Nevada and San Bernardino Mountains, in Kern and San Bernardino Counties, California. Geomorphic features include high-relief mountains, small hills, volcanic domes, pediments, broad alluvial valleys, and dry lakes. The mapped area includes pre-Tertiary plutonic, metavolcanic, metasedimentary, and other metamorphic rocks; Tertiary sedimentary and volcanic rocks; and Quaternary sediments and basalts. Included in the area are the El Paso, Lockhart, Blackwater, and Muroc faults as well as the central segment of the Garlock fault zone. The tectonically active western Mojave Desert and the variety of surficial materials have resulted in distinctive geomorphic features and terrains. Mapping has shown that the tectonically active area near the Garlock fault zone and El Paso Fault influenced development of drainage networks; base level is controlled by fault offset. There is evidence of a late Tertiary drainage network preserved in remnants of alluvial fans and paleo-drainage deposits north of the El Paso Mountains, west of the Lava Mountains, and south and west of the Rand Mountains. Faults identified as being active in the Holocene based on displaced stream channels, scarps, and shutter ridges include the Cantil Valley, Lockhart, Garlock, and Rand Mountain faults. Previously unmapped Holocene and late Pleistocene fault strands identified near the Rand Mountains may represent a splay at the northwest termination of the Lockhart Fault. The informally named Grass Valley fault, NW of Black Mountain, is a right-lateral strike-slip fault that may be a splay of the Blackwater Fault. Holocene activity on the Grass Valley fault is indicated by one displaced early Holocene stream terrace. Mapped faults in Fremont Valley are tentatively identified as surficial expressions of the buried Cantil Valley fault.

California↗

New vitrinite reflectance data for the Bighorn Basin, north-central Wyoming and south-central Montana

The Bighorn Basin is a large Laramide (Late Cretaceous through Eocene) structural and sedimentary basin that encompasses about 10,400 mi2 in north-central Wyoming and south-central Montana (fig. 1). Important conventional oil and gas resources have been discovered and produced from reservoirs ranging in age from Cambrian through Tertiary (Fox and Dolton, 1989, 1996a, b; De Bruin, 1993). In addition, a potential unconventional basin-centered gas accumulation may be present in Cretaceous reservoirs (Johnson and Finn, 1998; Johnson and others, 1999). The purpose of this report is to present new vitrinite reflectance data to be used in support of the U.S Geological Survey’s assessment of undiscovered oil and gas resources of the Bighorn Basin. These new data supplement previously published data by Nuccio and Finn (1998), and Yin (1997), and lead to a better understanding and characterization of the thermal maturation and burial history of potential source rocks. Eighty-nine samples of Cretaceous and Tertiary strata (fig. 2) were collected and analyzed—15 samples were from outcrops around the margins of the basin and 74 samples were well cuttings (fig. 1). Forty-one of the samples were shale, two were carbonaceous shale, and the remainder from coal. All samples were analyzed by vitrinite reflectance to determine levels of thermal maturation. Preparation of samples for reflectance analysis required (1) crushing the larger pieces into 0.25-to 1-mm pieces, (2) casting the pieces with epoxy in pre-cut and drilled plugs, and (3) curing the samples overnight. Subsequently, a four-step grinding and polishing process was implemented that included sanding with progressively finer sandpaper (60 and 600 grit) followed with a two-step polishing process (0.3 and 0.05 micron). Vitrinite reflectance measurements were determined at 500 X magnification using plane-polarized incident white light and a 546-nm monochromatic filter in immersion oil. For samples containing sufficiently high quality vitrinite, at least 25 measurements were recorded. For samples of poorer quality, either due to a poor polish or to the presence of mineral or other inorganic material, fewer measurements were recorded. Analytical results are given in tables 1 and 2.

Open-File Report↗

Groundwater-quality data and regional trends in the Virginia Coastal Plain, 1906-2007

A newly developed regional perspective of the hydrogeology of the Virginia Coastal Plain incorporates updated information on groundwater quality in the area. Local-scale groundwater-quality information is provided by a comprehensive dataset compiled from multiple Federal and State agency databases. Groundwater-sample chemical-constituent values and related data are presented in tables, summaries, location maps, and discussions of data quality and limitations. Spatial trends in groundwater quality and related processes at the regional scale are determined from interpretive analyses of the sample data. Major ions that dominate the chemical composition of groundwater in the deep Piney Point, Aquia, and Potomac aquifers evolve eastward and with depth from (1) 'hard' water, dominated by calcium and magnesium cations and bicarbonate and carbonate anions, to (2) 'soft' water, dominated by sodium and potassium cations and bicarbonate and carbonate anions, and lastly to (3) 'salty' water, dominated by sodium and potassium cations and chloride anions. Chemical weathering of subsurface sediments is followed by ion exchange by clay and glauconite, and subsequently by mixing with seawater along the saltwater-transition zone. The chemical composition of groundwater in the shallower surficial and Yorktown-Eastover aquifers, and in basement bedrock along the Fall Zone, is more variable as a result of short flow paths between closely located recharge and discharge areas and possibly some solutes originating from human sources. The saltwater-transition zone is generally broad and landward-dipping, based on groundwater chloride concentrations that increase eastward and with depth. The configuration is convoluted across the Chesapeake Bay impact crater, however, where it is warped and mounded along zones having vertically inverted chloride concentrations that decrease with depth. Fresh groundwater has flushed seawater from subsurface sediments preferentially around the impact crater as a result of broad contrasts between sediment permeabilities. Paths of differential flushing are also focused along the inverted zones, which follow stratigraphic and structural trends southeastward into North Carolina and northeastward beneath the chloride mound across the outer impact crater. Brine within the inner impact crater has probably remained unflushed. Regional movement of the saltwater-transition zone takes place over geologic time scales. Localized movement has been induced by groundwater withdrawal, mostly along shallow parts of the saltwater-transition zone. Short-term episodic withdrawals result in repeated cycles of upconing and downconing of saltwater, which are superimposed on longer-term lateral saltwater intrusion. Effective monitoring for saltwater intrusion needs to address multiple and complexly distributed areas of potential intrusion that vary over time. A broad belt of large groundwater fluoride concentrations underlies the city of Suffolk, and thins and tapers northward. Fluoride in groundwater probably originates by desorbtion from phosphatic sedimentary material. The high fluoride belt possibly was formed by initial adsorbtion of fluoride onto sediment oxyhydroxides, followed by desorbtion along the leading edge of the advancing saltwater-transition zone. Large groundwater iron and manganese concentrations are most common to the west along the Fall Zone, across part of the saltwater-transition zone and eastward, and within shallow groundwater far to the east. Iron and manganese initially produced by mineral dissolution along the Fall Zone are adsorbed eastward and with depth by clay and glauconite, and subsequently desorbed along the leading edge of the advancing saltwater-transition zone. Iron and manganese in shallow groundwater far to the east are produced by reaction of sediment organic matter with oxyhydroxides. Large groundwater nitrate and ammonium concentrations are mostly limited to shallow depths. Most nitrate a

Professional Paper↗

Geologic map and database of the Chocolate Mountain Aerial Gunnery Range, Riverside and Imperial Counties, California

The northwest-trending Chocolate Mountains are situated along the northeastern margin of the southern Salton Trough. The Chocolate Mountain Aerial Gunnery Range occupies most of the 75-km-long part of the Chocolate Mountains that lies between Salt Creek to the north and California State Highway 78 to the south. Mapping studies in the Chocolate Mountains within the gunnery range are few and this study was conducted in cooperation with the U.S. Navy (Naval Facilities Engineering Command Southwest, San Diego, California) and U.S. Marine Corps (Range Management Department, Marine Corps Air Station, Yuma, Arizona). Crystalline basement rocks in the Chocolate Mountains range in age from early Proterozoic to middle Cenozoic. Early and middle Proterozoic metamorphosed sedimentary and plutonic rocks include sillimanite-biotite-quartz feldspar gneiss, layered biotite-quartz-feldspar gneiss, biotite-quartz-feldspar augen gneiss, and largely undeformed late Proterozoic anorthosite and syenite. These rock types, which crop out as dispersed domains in the Chocolate Mountains, are remnants—along with more extensive domains observed in the Eastern Transverse Ranges to the north and in the San Gabriel Mountains to the northwest—of an originally more continuous assemblage that has been dextrally displaced along strands of the San Andreas Fault System.

California↗

Geology, distribution, and classification of gold deposits in the western Qinling belt, central China

Gold deposits of the western Qinling belt occur within the western part of the Qinling-Dabie-Sulu orogen, which is located between the Precambrian North China and Yangtze cratons and east of the Songpan-Ganzi basin. The early Paleozoic to early Mesozoic orogen can be divided into northern, central, and southern zones, separated by the Shangdan and Lixian-Shanyang thrust fault systems. The northern zone consists of an early Paleozoic arc accreted to the North China craton by ca. 450 Ma. The central zone, which contains numerous orogenic gold deposits, is dominated by clastic rocks formed in a late Paleozoic basin between the converging cratonic blocks. The southern zone is characterized by the easternmost exposure of Triassic sedimentary rocks of the Songpan-Ganzi basin. These Early to Late Triassic turbidities, in part calcareous, of the immense Songpan-Ganzi basin also border the western Qinling belt to the west. Carlinlike gold deposits are abundant (1) along a westward extension of the southern zone defined by a window of early Paleozoic clastic rocks extending into the basin, and (2) within the easternmost margin of the basinal rocks to the south of the extension, and in adjacent cover rocks of the Yangtze craton. Triassic and Early Jurassic synkinematic granitoids are widespread across the western Qinling belt, as well as in the Songpan-Ganzi basin. Orogenic lode gold deposits along brittle-ductile shear zones occur within greenschist-facies, highly deformed, Devonian and younger clastic rocks of the central zone. Mainly coarse-grained gold, along with pyrite, pyrrhotite, arsenopyrite, and minor base metal sulfides, occur in networks of quartz veinlets, brecciated wall rock, and are dissminated in altered wall rock. Isotopic dates suggest that the deposits formed during the Late Triassic to Middle Jurassic as the leading edge of the Yangtze craton was thrust beneath rocks of the western Qinling belt. Many gold-bearing placers are distributed along the river systems that flow south from the lode-bearing central zone. Carlin-like gold deposits have only been identified during the last decade in the southern zone of the western Qinling and in the northeastern corner of the Songpan-Ganzi basin. The deposits mainly contain micron-diameter gold in arsenical pyrite; are characterized by the common occurrence of cinnabar, stibnite, realgar, and orpiment; exhibit strong silicification, carbonatization, pyritization, and decalcification dissolution textures; and are structurally controlled. The lack of reactive host lithologies may have prevented development of large (> 100 tones of gold), stratigraphically-controlled orebodies, which are typical of the Carlin deposits in the western USA. These deposits are hosted by Triassic turbidities and shallow-water carbonates, and an early Paleozoic inlier in the Songpan-Ganzi basin that extends in an east-west belt for about 300 km. Rather than true "Carlin" deposits, these Carlin-like deposits may be some type of shallow-crustal (i.e., epithermal) hybrid with features intermediate to Nevada-style Carlin deposits and the orogenic gold deposits to the immediate north. These Carlin-like deposits also overlap in age with the early Mesozoic orogenic gold deposits and, therefore, also formed during the final stages of collision between the cratons and intermediate basin closure.

Mineralium Deposita↗

Fluorine, fluorite, and fluorspar in central Colorado

Fluorine (F) is a widespread element that was deposited in a variety of rocks, minerals, and geologic environments in central Colorado. It occurs as a trace element, as a major component of the mineral fluorite (CaFs), and as a major economic source of fluorine in fluorspar deposits, which are massive concentrations of fluorite. This study has compiled available geochemical analyses of rocks, both unmineralized and mineralized, to determine the distribution of fluorine in specific age-lithologic categories, ranging from 1.8-giga-annum (Ga) metamorphic rocks to modern soils, throughout central Colorado. It also draws upon field studies of fluorine-rich mineral deposits, including fluorspar deposits, to decipher the nearly two-billion-year-long geologic history of fluorine in the study area, with implications for mineral-resource evaluations and exploration. The resulting compilation provides an important inventory of the naturally occurring levels and sources of fluorine that ultimately weather, erode, and become part of surface waters that are used for domestic water supplies in densely populated areas along the Colorado Front Range. Most commonly, fluorine is a trace element in virtually all rocks in the region. In the 3,798 unmineralized rocks that were analyzed for fluorine in the study area, the average fluorine content was 1,550 parts per million (ppm). The median was 640 ppm, nearly identical to the average crustal abundance of 650 ppm, and some high-fluorine rocks in the Pikes Peak area skewed the average to a value much greater than the median. Most unmineralized age-lithologic rock suites, including Proterozoic metamorphic rocks, 1.7- and 1.4-Ga granitic batholiths, Cambrian igneous rocks, Phanerozoic sedimentary rocks, and Laramide and Tertiary igneous rocks, had median fluorine values of 400 to 740 ppm fluorine. In all suites, however, a small number of analyzed samples contained more than 1 percent (10,000 ppm) fluorine. The 1.1-Ga plutonic rocks related to the Pikes Peak batholith had a mean fluorine content of 1,700 ppm, and primary magmatic fluorite and fluorite-bearing pegmatites are common throughout that igneous mass. Fluorine was deposited in many types of economic mineral deposits in central Colorado, and it currently is a significant trace element in some thermal springs. In the fluorspar deposits, fluorine contents were as high as 37 percent. Some fluorine-rich porphyry systems, such as Jamestown, had fluorine values that ranged from 200 ppm to nearly 37 percent fluorine, and veins in other deposits contained hydrothermal fluorite, although it was not ubiquitous. For the 495 samples from non-fluorspar mining districts (and excluding Jamestown), however, the median fluorine content was 990 ppm. This is above the crustal average but still relatively modest compared to the fluorspar deposits, and it indicates that the majority of the mineralizing systems in central Colorado did not deposit large amounts of fluorine. Nevertheless, the fluorine- and fluorite-rich mineral deposits could be used as guides for the evaluation and discovery of related but concealed porphyry and epithermal base- and precious-metal deposits. The Cenozoic geologic history of central Colorado included multiple periods during which fluorine-bearing rocks and mineral deposits were exposed, weathered, and eroded. This protracted history has released fluorine into soils and regoliths, and modern rainfall and snowmelt interact with these substrates to add fluorine to the hydrosphere. This study did not evaluate the fluorine contents of water or make any predictions about what areas might be major sources for dissolved fluorine. However, the abundant data that are available on fluorine in surface water and ground water can be coupled with the results of this study to provide additional insight into natural sources of fluorine in domestic drinking water.

Scientific Investigations Report↗

Contributing areas to domestic wells in dipping sedimentary rocks under extreme recharge events

We use particle tracking to determine contributing areas (CAs) to wells for transient flow models that simulate cyclic domestic pumping and extreme recharge events in a small synthetic watershed underlain by dipping sedimentary rocks. The CAs consist of strike-oriented bands at locations where the water table intersects high-hydraulic conductivity beds, and from which groundwater flows to the pumping well. Factors that affect the size and location of the CAs include topographic flow directions, rock dip direction, cross-bed fracture density, and position of the well relative to streams. For an effective fracture porosity (n e ) of 10 -4 , the fastest advective travel times from CAs to wells are only a few hours. These results indicate that wells in this type of geologic setting can be highly vulnerable to contaminants or pathogens flushed into the subsurface during extreme recharge events. Increasing n e to 10 -3 results in modestly smaller CAs and delayed well vulnerability due to slower travel times. CAs determined for steady-state models of the same setting, but with long-term average recharge and pumping rates, are smaller than CAs in the models with extreme recharge. Also, the earliest-arriving particles arrive at the wells later in the steady-state models than in the extreme-recharge models. The results highlight the importance of characterizing geologic structure, simulating plausible effective porosities, and simulating pumping and recharge transience when determining CAs in fractured rock aquifers to assess well vulnerability under extreme precipitation events.

Groundwater↗

Late Cretaceous to Paleocene metamorphism and magmatism in the Funeral Mountains metamorphic core complex, Death Valley, California

Amphibolite-facies Proterozoic metasedimentary rocks below the low-angle Ceno-zoic Boundary Canyon Detachment record deep crustal processes related to Meso-zoic crustal thickening and subsequent extension. A 91.5 ?? 1.4 Ma Th-Pb SHRIMP-RG (sensitive high-resolution ion microprobe-reverse geometry) monazite age from garnet-kyanite-staurolite schist constrains the age of prograde metamorphism in the lower plate. Between the Boundary Canyon Detachment and the structurally deeper, subparallel Monarch Spring fault, prograde metamorphic fabrics are overprinted by a pervasive greenschist-facies retrogression, high-strain subhorizontal mylonitic foliation, and a prominent WNW-ESE stretching lineation parallel to corrugations on the Boundary Canyon Detachment. Granitic pegmatite dikes are deformed, rotated into parallelism, and boudinaged within the mylonitic foliation. High-U zircons from one muscovite granite dike yield an 85.8 ?? 1.4 Ma age. Below the Monarch Spring fault, retrogression is minor, and amphibolite-facies mineral elongation lineations plunge gently north to northeast. Multiple generations of variably deformed dikes, sills, and leucosomal segregations indicate a more complex history of partial melting and intrusion compared to that above the Monarch Spring fault, but thermobarometry on garnet amphibolites above and below the Monarch Spring fault record similar peak conditions of 620-680 ??C and 7-9 kbar, indicating minor (<3-5 km) structural omission across the Monarch Spring fault. Discordant SHRIMP-RG U-Pb zircon ages and 75-88 Ma Th-Pb monazite ages from leucosomal segregations in paragneisses suggest that partial melting of Proterozoic sedimentary protoliths was a source for the structurally higher 86 Ma pegmatites. Two weakly deformed two-mica leucogranite dikes that cut the high-grademetamorphic fabrics below the Monarch Spring fault yield 62.3 ?? 2.6 and 61.7 ?? 4.7 Ma U-Pb zircon ages, and contain 1.5-1.7 Ga cores. The similarity of metamorphic, leuco-some, and pegmatite ages to the period of Sevier belt thrusting and the period of most voluminous Sierran arc magmatism suggests that both burial by thrusting and regional magmatic heating contributed to metamorphism and subsequent partial melting. ??2007 Geological Society of America. All rights reserved.

Conference Paper↗

Notes on the availability of mid-Atlantic multichannel seismic reflection profiles 11 and 12-A, -B, -C, and -D

Available are two multichannel profiles collected by Digicon Geophysical Corporation in 1975 using a 48-channel streamer (3600 m long). and a 27.9 cu. liter air gun array. They were processed in Denver on the Phoenix "I" by William C. Patterson. The processing included demultiplexing and resampling, geometry and common-depth-point definition, velocity analysis, noise muting, band-pass filtering, time-variant filtering, time-variant deconvolution, and automatic gain control (AGC) scaling, prior to the final profile playout. The release includes parts of two lines off the mid-atlantic continental margin (see map) over the Baltimore Canyon trough. These profiles were collected as part of a regional grid over the offshore Atlantic sedimentary basins, as a part of a continuing program to assess the resource potential using non-proprietary data Line 11 is a cross shelf profile (233 ken long) taken across the shelf, slope and upper rise off Virginia (southern Baltimore Canyon trough). Line 12 (shotpoint 1Ol- 6011, parts A, 8, C and D) is an along-the-shelf profiler and stretches from the Cape Hatteras IPOD line to line 2, at the northern part of the Baltimore Canyon trough), a distance of 591 km. These profiles may be viewed at the U.S. Geological Survey, Atlantic Gulf of Mexico, Office of Marine Geology, Quissett campus, Building B, Woods Hole, Massachusetts 02543, and at the U.S. Geological Survey, Branch of Oil and Gas Resources, Denver Federal Center, Building 25, Denver. Colorado 80225. Copies of the profiles can be purchased from the Nations Geophysical and Solar-Terrestrial Data Center, Environmental Data Service- NOAA, Code D621 Boulder, Colorado 80303.

Open-File Report↗

Geologic map of the Peach Springs 30' x 60' quadrangle, Mohave and Coconino counties, northwestern Arizona

This map is a product of a cooperative project of the U.S. Geological Survey, the U.S. National Park Service, and the Bureau of Land Management to provide geologic map coverage and regional geologic information for visitor services and resource management of Grand Canyon National Park, Lake Mead National Recreation Area, Grand Canyon-Parashant-National Monument, and adjacent lands in northwestern Arizona. This map is a synthesis of previous and new geologic mapping that encompasses the Peach Springs 30' x 60' quadrangle, Arizona. The geologic data will support future geologic, biologic, hydrologic, and other science resource studies of this area conducted by the National Park Service, the Hualapai Indian Tribe, the Bureau of Land Management, the State of Arizona, and private organizations. The Colorado River and its tributaries have dissected the southwestern Colorado Plateau into what is now the southwestern part of Grand Canyon. The erosion of Grand Canyon has exposed about 426 m (1,400 ft) of Proterozoic crystalline metamorphic rocks and granite, about 1,450 m (4,760 ft) of Paleozoic strata, and about 300 m (1,000 ft) of Tertiary sedimentary rocks. Outcrops of Proterozoic crystalline rocks are exposed at the bottom of Grand Canyon at Granite Park from Colorado River Mile 207 to 209, at Mile 212, and in the Lower Granite Gorge from Colorado River Mile 216 to 262, and along the Grand Wash Cliffs in the southwest corner of the map area.

Arizona↗

Geohydrology and susceptibility of aquifers to surface contamination in Alabama; area 5

The U.S. Geological Survey, in cooperation with the Alabama Department of Environmental Management, is conducting a series of geohydrologic studies to delineate the major aquifers and their susceptibility to contamination in Alabama. This report delineates and describes the geohydrology and susceptibility of the major aquifers to contamination in Area 5--Chambers, Clay, Cleburne, Coosa, Lee, Randolph, and Tallapoosa Counties. Little groundwater is used for public water supplies in Area 5. Groundwater withdrawals for public supply in 1985 were 0.88 million gal/day. Most cities and towns that formerly used groundwater presently use surface water. None of the sedimentary rocks or unconsolidated deposits is tapped by public supply wells. None of the igneous and metamorphic rocks are considered a major aquifer because of low yields. Aquifers in the study area are susceptible to surface contamination throughout their entire outcrop area. Areas that are highly faulted and valley areas where groundwater is at or near land surface have potential to be highly susceptible to surface contamination. (USGS)

Water-Resources Investigations Report↗

Metamorphosed melange terrane in the eastern Piedmont of North Carolina

The Falls Lake melange crops out in the eastern Piedmont of North Carolina between the Carolina slate belt and the Raleigh belt. The melange is composed of mafic and ultramafic blocks and pods of diverse shapes and sizes, dispersed without apparent stratigraphic continuity, in a matrix of pelitic schist and biotite-muscovite-plagioclase-quartz gneiss. Textures and structural relationships suggest formation by a combination of sedimentary and tectonic processes, perhaps in the accretionary wedge of a convergent plate margin. The Falls Lake melange and the overlying late Proterozoic to Early Cambrian volcanic-arc terrane of the Carolina slate belt were thrust upon a probable continental terrane of the Raleigh belt before overprinting by late Paleozoic folding and metamorphism.

Geology↗