Geology Reports⌕ Search

USGS · wsp1576F

Geology and hydrology of the Fort Belknap Indian Reservation, Montana

Abstract

The Fort Belknap Indian Reservation includes an area of 970 square miles in north-central Montana. At its north edge is the Milk River valley, which is underlain by Recent alluvium of the Milk River, glacial deposits, and alluvial deposits of the preglacial Missouri River, which carved and occupied this valley before the Pleistocene Epoch. Rising gently to the south is an undulating glaciated plain broken only by three small syenite porphyry intrusions. Underlying the glacial till of the plain are Upper Cretaceous shale and sandstone of the Bearpaw and Judith River Formations. At the south end of the reservation, 40 miles from the Milk River, an intrusion of syenite porphyry in Tertiary time uplifted, tilted, and exposed the succession of sedimentary rocks overlying the Precambrian metamorphic basement. The sedimentary rocks include 1,000 feet of sandstone and shale of Cambrian age; 2,000 feet of limestone and dolomite of Ordovician, Devonian, and Mississippian age; 400 feet of shale and limestone of Jurassic age; and 3,500 feet of sandstone, siltstone, and shale of Cretaceous age. Extensive gravel terraces of Tertiary and Quaternary age bevel the upturned bedrock formations exposed around the Little Rocky Mountains. Ground water under water-table conditions is obtained at present from alluvium, glaciofluvial deposits, and the Judith River Formation. The water table ranges in depth from a few feet beneath the surface in the Milk River valley alluvium to more than 100 feet deep in the Judith River Formation. Yields to wells are generally low but adequate for domestic and stock-watering use. Quality of the water ranges from highly mineralized and unusable to excellent; many wells in the Milk River valley have been abandoned because of the alkalinity of their water. Potential sources of additional ground-water supplies are the alluvial gravel of creeks issuing from the Little Rocky Mountains and some extensive areas of terrace gravel. The uplift and tilting of the sedimentary sequence around the Little Rocky Mountains and the minor intrusions in the central plain have created artesian conditions within aquifers. Wells obtain artesian water from sandstone aquifers in the Judith River, Eagle, and Kootenai Formations. Other potential aquifers, near their outcrop areas, are the Ellis Group and the Mission Canyon Limestone. Most wells that flow at the surface have small yields, but discharges of as much as 150 gallons per minute have been noted. Quality of artesian water ranges from poor to good. Well depths range from less than 50 to more than 300 feet.

Explore related subjects

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Douglas C. Alverson. 1965. Geology and hydrology of the Fort Belknap Indian Reservation, Montana. https://doi.org/10.3133/wsp1576f

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related USGS reports

Basic ground-water hydrology

Ground water is one of the Nation's most valuable natural resources. It is the source of about 40 percent of the water used for all purposes exclusive of hydropower generation and electric powerplant cooling. Surprisingly, for a resource that is so widely used and so important to the health and to the economy of the country, the occurrence of ground water is not only poorly understood but is also, in fact, the subject of many widespread misconceptions. Common misconceptions include the belief that ground water occurs in underground rivers resembling surface streams whose presence can be detected by certain individuals. These misconceptions and others have hampered the development and conservation of ground water and have adversely affected the protection of its quality. In order for the Nation to receive maximum benefit from its ground-water resource, it is essential that everyone, from the rural homeowner to managers of industrial and municipal water supplies to heads of Federal and State water-regulatory agencies, become more knowledgeable about the occurrence, development, and protection of ground water. This report has been prepared to help meet the needs of these groups, as well as the needs of hydrologists, well drillers, and others engaged in the study and development of ground-water supplies. It consists of 45 sections on the basic elements of ground-water hydrology, arranged in order from the most basic aspects of the subject through a discussion of the methods used to determine the yield of aquifers to a discussion of common problems encountered in the operation of ground-water supplies. Each section consists of a brief text and one or more drawings or maps that illustrate the main points covered in the text. Because the text is, in effect, an expanded discussion of the illustrations, most of the illustrations are not captioned. However, where more than one drawing is included in a section, each drawing is assigned a number, given in parentheses, and these numbers are inserted at places in the text where the reader should refer to the drawing. In accordance with U.S. Geological Survey policy to encourage the use of metric units, these units are used in most sections. In the sections dealing with the analysis of aquifer (pumping) test data, equations are given in both consistent units and in the inconsistent inch-pound units still in relatively common use among ground-water hydrologists and well drillers. As an aid to those who are not familiar with metric units and with the conversion of ground-water hydraulic units from inch-pound units to metric units, conversion tables are given on the inside back cover. Definitions of ground-water terms are given where the terms are first introduced. Because some of these terms will be new to many readers, abbreviated definitions are also given on the inside front cover for convenient reference by those who wish to review the definitions from time to time as they read the text. Finally, for those who need to review some of the simple mathematical operations that are used in ground-water hydrology, a section on numbers, equations, and conversions is included at the end of the text.

Water Supply Paper↗

Use of stable isotopes of carbon, nitrogen, and sulfur to identify sources of nitrogen in surface waters in the lower Susquehanna River basin, Pennsylvania

With the exception of sewage and septic effluents, most nitrogen sources and soils contain larger proportions of organic and reduced forms of carbon, nitrogen, and sulfur than inorganic, oxidized forms. In contrast, most surface water and ground water contains larger proportions of dissolved inorganic carbon, nitrogen, and sulfur forms than organic forms. Data indicate that carbon, nitrogen, and sulfur are extensively processed in soils and streams.

Water Supply Paper↗

Validation of a numerical modeling method for simulating rainfall-runoff relations for headwater basins in western King and Snohomish Counties, Washington

The validity of a previously determined numerical modeling method was assessed. Numerical models for 11 drainage basins were constructed with the Hydrologic Simulation Program-FORTRAN (HSPF) with parameter values that were generalized for the physiographic region. Large and recurrent simulation errors were initially identified, but three systematic modifications of the models corrected those errors for 10 out of the 11 basins. The validity of the numerical modeling method for simulating rainfall-runoff relations in the study area, as modified during this investigation, was not rejected, but observed streamflow data were needed to apply the method.

Water Supply Paper↗