SEARCH · Geology Reports

Results for “Rocks & Minerals”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,711 records · Page 95Linked to original sources

USGS2010

Limited hydrologic response to Pleistocene climate change in deep vadose zones - Yucca Mountain, Nevada

Understanding the movement of water through thick vadose zones, especially on time scales encompassing long-term climate change, is increasingly important as societies utilize semi-arid environments for both water resources and sites viewed as favorable for long-term disposal or storage of hazardous waste. Hydrologic responses to Pleistocene climate change within a deep vadose zone in the eastern Mojave Desert at Yucca Mountain, Nevada, were evaluated by uranium-series dating of finely layered hyalitic opal using secondary ion mass spectrometry. Opal is present within cm-thick secondary hydrogenic mineral crusts coating floors of lithophysal cavities in fractured volcanic rocks at depths of 200 to 300 m below land surface. Uranium concentrations in opal fluctuate systematically between 5 and 550 μg/g. Age-calibrated profiles of uranium concentration correlate with regional climate records over the last 300,000 years and produce time-series spectral peaks that have distinct periodicities of 100- and 41-ka, consistent with planetary orbital parameters. These results indicate that the chemical compositions of percolating solutions varied in response to near-surface, climate-driven processes. However, slow (micrometers per thousand years), relatively uniform growth rates of secondary opal and calcite deposition spanning several glacial–interglacial climate cycles imply that water fluxes in the deep vadose zone remained low and generally buffered from the large fluctuations in available surface moisture during different climates.

Nevada↗

USGS2006

Composition of aeolian dust in natural traps on isolated surfaces of the central Mojave Desert - Insights to mixing, sources, and nutrient inputs

The recognition and characterization of aeolian dust in soil contribute to a better understanding of landscape and ecosystem dynamics of drylands. Results of this study show that recently deposited dust, sampled in isolated, mostly high-ground settings, is chemically and mineralogically similar on varied geologic substrates over a large area (15 000 km2) in the Mojave Desert. The silt-plus-clay fraction (fines) on these isolated surfaces is closely alike in magnetic-mineral composition, in contrast to greatly dissimilar magnetic compositions of rock surfaces of vastly different lithologies, on which the fines have accumulated. The fines, thus, are predominantly deposited dust. The amounts of potential nutrients in the sampled dust are much more uniform than might be provided by direct, local weathering of bedrock or by dust locally derived from nearby weathered products. The compositional similarity of the dust on these surfaces is interpreted to result from mixing of fines in the atmosphere as well as in fluvial, alluvial, and lacustrine depositional settings prior to dust emission.

Journal of Arid Environments↗

USGS2015

Mapping the 3-D extent of the Northern Lobe of the Bushveld layered mafic intrusion from geophysical data

Geophysical models image the 3D geometry of the mafic portion of the Bushveld Complex north of the Thabazimbi-Murchison Lineament (TML), critical for understanding the origin of the world's largest layered mafic intrusion and platinum group element deposits. The combination of the gravity and magnetic data with recent seismic, MT, borehole and rock property measurements powerfully constrains the models. The intrusion north of the TML is generally shallowly buried (generally <1500 m) with a modeled area of &sim;160 km × &sim;125 km. The modeled thicknesses are not well constrained but vary from &sim;<1000 to >12,000 m, averaging &sim;4000 m. A feeder, suggested by a large modeled thickness (>10,000 m) and funnel shape, for Lower Zone magmas could have originated near the intersection of NS and NE trending TML faults under Mokopane. The TML has been thought to be the feeder zone for the entire Bushveld Complex but the identification of local feeders and/or dikes in the TML in the models is complicated by uncertainties on the syn- and post-Bushveld deformation history. However, modeled moderately thick high density material near the intersection of faults within the central and western TML may represent feeders for parts of the Bushveld Complex if deformation was minimal. The correspondence of flat, high resistivity and density regions reflect the sill-like geometry of the Bushveld Complex without evidence for feeders north of Mokopane. Magnetotelluric models indicate that the Transvaal sedimentary basin underlies much of the Bushveld Complex north of the TML, further than previously thought and important because the degree of reaction and assimilation of the Transvaal rocks with the mafic magmas resulted in a variety of mineralization zones.

Precambrian Research↗

USGS2018

Serpentinite‐rich gouge in a creeping segment of the Bartlett Springs Fault, northern California: Comparison with SAFOD and implications for seismic hazard

An exposure of a creeping segment of the Bartlett Springs Fault (BSF), part of the San Andreas Fault system in northern California, is a ~1.5‐m‐wide zone of serpentinite‐bearing fault gouge cutting through Late Pleistocene fluvial deposits. The fault gouge consists of porphyroclasts of antigorite serpentinite, talc, chlorite, and tremolite‐actinolite, along with some Franciscan metamorphic rocks, in a matrix of the same materials. The Mg‐mineral assemblage is stable at temperatures above 250–300 °C. The BSF gouge is interpreted to have been tectonically incorporated into the fault from depths near the base of the seismogenic zone and to have risen buoyantly to the surface where it is now undergoing right‐lateral displacement. The ultramafic‐rich composition, frictional properties, and inferred mode of emplacement of the BSF serpentinitic gouge correspond to those of the creeping traces of the San Andreas Fault identified in the SAFOD (San Andreas Fault Observatory at Depth) drill hole. This suggests a common origin for creep at both locations. A tectonic model for the source of the ultramafic‐rich materials in the BSF is proposed that potentially could explain the distribution of creep throughout the northernmost San Andreas Fault system.

California↗

USGS1966

Calcium and bromide contents of natural waters

The linear relation observed in a log Ca ++ versus log Br - plot for subsurface Cl - waters is attributed to ultrafiltration by shale of sea water and fresh water that have passed through sedimentary rocks since their formation. Reactions between these solutions and sedimentary minerals, particularly dolomitization, must have contributed additional Ca ++ to solution.

Science↗

USGS1986

Danburite in evaporites of the Paradox basin, Utah.

Danburite (CaB 2 Si 2 O 8 ) has been found as nodules in Pennsylvanian age marine evaporites of the Paradox basin, Utah. Originally danburite had been known as a high-temperature mineral that occurs at numerous localities in igneous and metamorphic rocks. Since its discovery in water-insoluble residues from a Louisiana salt dome in 1937, it has been found in several other evaporites. The occurrence of danburite and its relation to the host rock in the Paradox basin evaporites indicates that it most likely formed by diagenetic reaction of boron-rich, high-salinity brines with constituents in the anhydrite host rock.

Journal of Sedimentary Petrology↗

USGS1996

Trace elements in tourmalines from massive sulfide deposits and tourmalinites: Geochemical controls and exploration applications

Trace element contents of tourmalines from massive sulfide deposits and tourmalinites have been determined in situ by proton microprobe; >390 analyses were acquired from 32 polished thin sections. Concentrations of trace elements in the tourmalines vary widely, from <40 to 3,770 ppm Mn, <4 to 1,800 ppm Ni, <2 to 1,430 ppm CU, <9 to 4,160 ppm Zn, 3 to 305 ppm Ga, <6 to 1,345 ppm Sr, <10 to 745 ppm Sn, <49 to 510 ppm Ba, and <3 to 4,115 ppm Pb. Individual grains and growth zones are relatively homogeneous, suggesting that these trace elements are contained within the crystal structure of the tourmaline, and are not present in inclusions. The highest base metal contents are in ore-related tourmaline samples from Kidd Creek (Ontario), Broken Hill (Australia), and Sazare (Japan). Tourmaline data from these and many other massive sulfide deposits cluster by sample and display broadly linear trends on Zn vs. Fe plots, suggesting chemical control by temperature and hydrothermal and/or metamorphic fluid-mineral equilibria. Significant Ni occurs only in samples from the Kidd Creek Cu-Zn-Pb-Ag deposit, which is associated with a large footwall ultramafic body. An overall antithetic relationship between Zn and Ni probably reflects fluid source controls. Mn is correlated with Fe in tourmalines from barren associations, and possibly in some tourmalines associated with sulfide vein deposits. Sn increases systematically with Fe content irrespective of association; the highest values are found in schorls from granites. Other trace elements are generally uncorrelated with major element concentrations (e.g., Sr-Ca). Base metal proportions in the tourmalines show systematic patterns on ternary Cu-Pb-Zn diagrams that correlate well with the major commodity metals in the associated massive sulfide deposits. For example, data for tourmalines from Cu-Zn deposits (e.g., Ming mine, Newfoundland) fall mainly on the Cu-Zn join, whereas those from Pb-Zn deposits (e.g., Broken Hill, Australia) plot on the Pb-Zn join; no data fall on the Cu-Pb join, consistent with the lack of this metal association in massive sulfide deposits. The systematic relationship between base metal proportions in the tourmalines and the metallogeny of the host massive sulfide deposits indicates that the analyzed tourmalines retain a strong chemical signature of their original hydrothermal formation, in spite of variable metamorphic recrystallization. Such trace element patterns in massive sulfide tourmalines may be useful in mineral exploration, specifically for the evaluation of tourmaline concentrations in rocks, soils, and stream sediments.

Economic Geology↗

USGS1998

International strategic mineral issues summary report– Tungsten

Scheelite and wolframite are the principal minerals currently mined for tungsten. Both occur in hard-rock deposits; wolframite is also recovered from placer deposits. Most current mine production of tungsten is from vein/stockwork, skarn, porphyry, and strata-bound deposits. Minor amounts are produced from disseminated, pegmatite, breccia, and placer deposits. Most tungsten is used to make tungsten carbide and tungsten alloys for use in machine tools and drilling equipment. Other important applications are in lamp filaments and cathodes, high-speed steels, textile dyes, paints, and catalysts. The world is well endowed with tungsten resources. China and the former Soviet Union have 8 of the world's 10 largest deposits; these 8 contain about half of the world's resources of tungsten. If economic conditions are suitable, world tungsten resources in known deposits and their extensions (categories R1 and R2), including economic, marginal, and subeconomic resources, are sufficient to permit world production to continue at 1995 levels until well into the 21st century. World tungsten resources in identified deposits and districts that are currently economically exploitable (category R1E) appear to be sufficient to meet world demand at 1995 levels only until the year 2007. However, the figure for resources of this kind does not include or reflect resources whose economic parameters are unknown in major producing areas in the former Soviet Union, China, and other nonmarket-economy countries and thus severely underestimates future tungsten availability. In 1995, China and the former Soviet Union accounted for over three-fourths of the world's mine production of tungsten. China alone produced about two-thirds of world output. Given its vast resources, China will likely maintain its prominent role in world tungsten supply. By the year 2020, changes in supply patterns are likely to result from declining output from individual deposits in Australia, Austria, and Portugal and the opening of new mines in Canada, China, and the United Kingdom.

Circular↗

USGS2000

Surface water data and geographic relation to Tertiary age intrusions and hydrothermal alteration in the Grand Mesa, Uncompahgre, and Gunnison National Forests (GMUG) and intervening Bureau of Land Management (BLM) lands

This data set covering the western part of Colorado includes water quality data from eight different sources (points), nine U.S. Geological Survey Digital Raster Graph (DRG) files for topographic bases, a compilation of Tertiary age intrusions (polygons and lines), and two geotiff files showing areas of hydrothermally altered rock. These data were compiled for use with an ongoing mineral resource assessment of theGrand Mesa, Uncompahgre, and Gunnison National Forests (GMUG) and intervening Bureau of Land Management(BLM) lands. This compilation was assembled to give federal land managers a preliminary view of water within sub-basinal areas, and to show possible relationships to Tertiary age intrusion and areas of hydrothermal alteration.

Open-File Report↗

USGS2008

Geologic Field Notes, Geochemical Analyses, and Field Photographs of Outcrops and Rock Samples from the Big Delta B-1 Quadrangle, East-Central Alaska

The U.S. Geological Survey, in cooperation with the Alaska Department of Natural Resources Division of Mining, Land, and Water, has released a geologic map of the Big Delta B-1 quadrangle of east-central Alaska (Day and others, 2007). This companion report presents the major element oxide and trace element geochemical analyses, including those for gold, silver, and base metals, for representative rock units and for grab samples from quartz veins and mineralized zones within the quadrangle. Also included are field station locations, field notes, structural data, and field photographs based primarily on observations by W.C. Day with additions by J.M. O'Neill and B.M. Gamble, all of the U.S. Geological Survey. The data are provided in both Microsoft Excel spread sheet format and as a Microsoft Access database.

Open-File Report↗

USGS1971

Geochemical maps of Samrah and vicinity, Kingdom of Saudi Arabia

Geochemical maps of Samrah and vicinity, near Ad Dawadimi, display anomalies for the ore metals over each of the major ancient mining sites, a large contamination anomaly over the ancient ore-processing waste, and less-well defined anomalies parallel to mineralized structures. Zirconium and lanthanum display negative anomalies over altered rocks, do not display the contamination anomaly, and, for zirconium, identify the west workings at Samrah as the site of most intense alteration.

Open-File Report↗

USGS1976

Regional appraisal of the Wilcox Group in Texas for subsurface storage of fluid wastes: Part 1: Geology

Sandy beds of the Wilcox Group in Texas are underlain and overlain by clays of the Midway and Claiborne Groups. The Wilcox is divided by a persistent shale wedge. Contrasting delta systems described as high-constructive and high-destructive exist in the divisions. Merged high constructive deltas characterize the lower, while the upper Wilcox was deposited as a high destructive system. Maximum sand development occurs downdip parallel to regional depositional strike in the delta facies. Further downdip, shales replace sands, and sediments are (abnormally high pressured) geopressured. The structure o5 the updip port[on is that of a stable shelf. Downdip, greatly thickened beds are cut by large faults. These faults and the resultant deposits are recognized as being the result of a previously unnamed phenomenon--here termed hydrothermal tectonism. This process is keyed to the thermal diagenesis of the clay mineral montmorillonite and resultant transfer of overburden pressure from the rock framework to the contained fluid.

Texas↗

USGS2015

Hydrogeochemical exploration: a reconnaissance study on northeastern Seward Peninsula, Alaska

A reconnaissance hydrogeochemical study employing high-resolution/high-sensitivity inductively coupled plasma mass spectrometry analysis of stream and seep water samples ( n = 171) was conducted in an area of limited bedrock exposure on the northeastern Seward Peninsula, Alaska. Sampling was focused in drainages around four main areas—at the Anugi Pb-Zn-Ag occurrence and in streams upstream of historically and currently mined placer gold deposits in the Candle Creek, Utica, and Monument Mountain areas. The objective of the study was to determine whether distribution of elevated metal concentrations in water samples could “see” through sediment cover and provide evidence of bedrock sources for base metals and gold. Some observations include (1) elevated Ag, As, Pb, and Zn concentrations relative to the study area as a whole in stream and seep samples from over and downstream of part of the Anugi Pb-Zn-Ag prospect; (2) abrupt downstream increases in Tl and Sb ± Au concentrations coincident with the upstream termination of productive placer deposits in the Inmachuk and Old Glory Creek drainages near Utica; (3) high K, Mo, Sb, and F throughout much of the Inmachuk River drainage near Utica; and (4) elevated As ± base metals and Au at two sites along Patterson Creek near the town of Candle and three additional contiguous sites identified when an 85th percentile cut-off was employed. Molybdenum ± gold concentrations (>90th percentile) were also measured in samples from three sites on Glacier Creek near Monument Mountain. The hydrogeochemistry in some areas is consistent with limited stream-sediment data from the region, including high Pb-Zn-Ag-As concentrations associated with Anugi, as well as historical reports of arsenopyrite-bearing veins upstream of placer operations in Patterson Creek. Chemistry of samples in the Inmachuk River-Old Glory Creek area also suggest more laterally extensive stibnite- (and gold-?) bearing veining than is currently known in the Old Glory Creek drainage. Our results indicate that hydrogeochemistry can be a useful method of geochemical exploration and offer targets for follow-up rock, soil, and subsurface sampling to ascertain the presence of mineralized bedrock.

Alaska↗

USGS1953

Rosamond Prospect, Kern county, California

Small quantities of autunite and gummite (?) occur in tuffaceous sedimentary rocks of the Rosamond formation of Miocene age at the Rosamond prospect. The property is about 10 miles south of Mojave, Jern County, California, in the western Mojave Desert. Examination of the propert in January 1952, by George W. Walker and Luther H. Baumgardner of the U.S. Geological Survey, indicates the the autunite occurs principally as coating on fracture and joint surfaces and, to a less extent, as disseminations in the tuffaceous rocks adjacent to faults. A waxy, reddish-brown, radioactive mineral, here called gummite (?), is found in small quantities on slickensided fault surfaces associated with iron oxides and chlorite (?). The uranium minerals are erratically distributed over an area of about 15 acres. Assay of 12 samples indicate a uranium content ranging from 0.002 to 0.59 percent and an average content of slightly less than 0.08 percent uranium.

California↗

USGS1985

CLAY MINERALOGY OF INSOLUBLE RESIDUES IN MARINE EVAPORITES.

Insoluble residues from three sequences of Paleozoic marine evaporites (Retsof salt bed in western New York, Salado Formation in south-eastern New Mexico, and Paradox Member of the Hermosa Formation in southeastern Utah) are rich in trioctahedral clays. Chlorite (clinochlore), corrensite (mixed-layer chlorite-trioctahedral smectite), talc, and illite (the only dioctahedral clay) are the dominant clay minerals; serpentine, discrete trioctahedral smectite (saponite), and interstratified talc-trioctahedral smectite are sporadically abundant. These clay-mineral assemblages differ chemically and mineralogically from those observed in most continental and normal marine rocks, which commonly contain kaolinite, dioctahedral smectite (beidellite-montmorillonite), illite, mixed-layer illite-dioctahedral smectite, and, in most cases, no more than minor quantities of trioctahedral clay minerals. The distinctive clay mineralogy in these evaporite sequences suggests a largely authigenic origin. These clay minerals are thought to have formed during deposition and early diagenesis through interaction between argillaceous detritus and Mg-rich marine evaporite brines.

Conference Paper↗

USGS1990

Oxygen and carbon isotope ratios of hydrothermal minerals from Yellowstone drill cores

Oxygen and carbon isotope ratios were measured for hydrothermal minerals (silica, clay and calcite) from fractures and vugs in altered rhyolite, located between 28 and 129 m below surface (in situ temperatures ranging from 81 to 199??C) in Yellowstone drill holes. The purpose of this study was to investigate the mechanism of formation of these minerals. The ??18O values of the thirty-two analyzed silica samples (quartz, chalcedony, ??-cristobalite, and ??-cristobalite) range from -7.5 to +2.8???. About one third of the silica 7samples have ??18O values that are consistent with isotopic equilibrium with present thermal waters; most of the other silica samples appear to have precipitated from water enriched in 18O (up to 4.7???) relative to present thermal water, assuming precipitation at present in situ temperatures. Available data on fluid-inclusion homogenization temperatures in hydrothermal quartz indicate that silica precipitation occurred mostly at temperatures above those measured during drilling and imply that 15O enrichments in water during silica precipitation were generally larger than those estimated from present conditions. Similarly, clay minerals (celadonite and smectite) have ??18O values higher (by 3.5 to 7.9???) than equilibrium values under present conditions. In contrast, all eight analyzed calcite samples are close to isotopic equilibrium with present thermal waters. The frequent incidence of apparent 18O enrichment in thermal water from which the hydrothermal minerals precipitated may indicate that a higher proportion of strongly 18O-enriched deep hydrothermal fluid once circulated through shallow portions of the Yellowstone system, or that a recurring transient 18O-enrichment effect occurs at shallow depths and is caused either by sudden decompressional boiling or by isotopic exchange at low water/rock ratios in new fractures. The mineralogy and apparent 18O enrichments of hydrothermal fracture-filling minerals are consistent with deposition during transient boiling or rock-water exchange (fracturing) events. ?? 1990.

Journal of Volcanology and Geothermal Research↗

USGS1999

Middle Miocene paleotemperature anomalies within the Franciscan Complex of northern California: Thermo-tectonic responses near the Mendocino triple junction

This study documents three localities in the Franciscan accretionary complex of northern California, now adjacent to the San Andreas fault, that were overprinted thermally between 13.9 and 12.2 Ma: Point Delgada-Shelter Cove (King Range terrane); Bolinas Ridge (San Bruno Mountain terrane); and Mount San Bruno (San Bruno Mountain terrane). Vein assemblages of quartz, carbonate, sulfide minerals, and adularia were precipitated locally in highly fractured wall rock. Vitrinite reflectance (Rm) values and illite crystallinity decrease away from the zones of metalliferous veins, where peak wall-rock temperatures, as determined from Rm, were as high as 315??C. The ??18O values of quartz and calcite indicate that two separate types of fluid contributed to vein precipitation. Higher ??18O fluids produced widespread quartz and calcite veins that are typical of the regional paleothermal regime. The widespread veins are by-products of heat conduction and diffuse fluid flow during zeolite and prehnite-pumpellyite-grade metamorphism, and we interpret their paleofluids to have evolved through dehydration reactions and/or extensive isotopic exchange with accreted Franciscan rocks. Lower ??18O fluids, in contrast, evolved from relatively high temperature exchange between seawater (or meteoric water) and basaltic and/or sedimentary host rocks; focused flow of those fluids resulted in local deposition of the metalliferous veins. Heat sources for the three paleothermal anomalies remain uncertain and may have been unrelated to one another. Higher temperature metalliferous fluids in the King Range terrane could have advected either from a site of ridge-trench interaction north of the Mendocino fracture zone or from a "slabless window" in the wake of the northward migrating Mendocino triple junction. A separate paradox involves the amount of Quaternary offset of Franciscan basement rocks near Shelter Cove by on-land faults that some regard as the main active trace of the San Andreas plate boundary. Contouring of vitrinite reflectance values to the north of an area affected by A.D. 1906 surface rupture indicates that the maximum dextral offset within the interior of the King Range terrane is only 2.5 km. If this fault extends inland, and if it has been accommodating most of the strike-slip component of San Andreas offset at a rate of 3-4 cm/yr, then its activity began only 83-62 ka. This interpretation would also mean that a longer term trace of the San Andreas fault must be nearby, either offshore or along the northeast boundary of the King Range terrane. An offshore fault trace would be consistent with peak heating of King Range strata north of the Mendocino triple junction. Conversely, shifting the fault to the east would be compatible with a slabless window heat source and long-distance northward translation of the King Range terrane after peak heating.

Geological Society of America Bulletin↗

USGS2012

Lunar ferroan anorthosites: mineralogy, compositional variations, and petrogenesis

Detailed petrologic study of a suite of lunar ferroan anorthosites indicates that their mineral compositional variations are generally consistent with derivation of these anorthosites from a common parent magma. There are continuous compositional variations in major elements and smooth trends in minor elements (Mg, Fe in plagioclase; Al, Ti, Cr in pyroxene). Relict textures, zoning, and possible primary trends of mineral compositional variations are preserved in many of the anorthosites. The presence of heterogeneous, bimodal, and/or trimodal pyroxene compositions suggests that some of the anorthosites are polymict rocks; however, they are composed entirely of ferroan-anorthosite-suite lithologies. Some aspects of the mineral composition data suggest that complex processes operated during formation of the ferroan anorthosites. The lack of a well-defined, positive or negative trend of pyroxene Mg/(Mg + Fe) versus plagioclase anorthite content, the homogenization of mineral compositions in some anorthosites, and the varied and apparently enriched Mn contents of pyroxenes in some anorthosites suggest that original igneous compositional characteristics have been altered during and/or after crystallization. Processes operative during anorthosite formation may have included some mixing of different melts, trapping of variable amounts of intercumulus liquid, postcrystallization redistribution of elements, or perturbations both during adcumulus growth and subsequent to crystallization by impact events. FeO and MgO contents of the highly calcic plagioclase typical of these anorthosites suggest that the plagioclase-melt distribution coefficients for these elements need to be reassessed.

Journal of Geophysical Research↗