Geology Reports⌕ Search

SEARCH · Geology Reports

Results for “Northwest Geology”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,567 records · Page 87Linked to original sources
USGS1970

Faulting in the Burro Mountain area, California Coast Ranges, and its relation to the Nacimiento fault

The northwest-striking Nacimiento fault, in the southern Coast Ranges of California, has generally been regarded as the boundary between two major structural blocks: the Nacimiento block to the southwest, in which the basement rocks belong to the Franciscan Formation (Upper Jurassic to Upper Cretaceous), and the Salinian block to the northeast, in which the basement rocks are granitic and high-grade metamorphic. It has been found, however, that in the Burro Mountain area of the southern Santa Lucia Range, the “Nacimiento” fault of Jennings (1959) is nearly vertical and is within the Nacimiento block. In this area, the Franciscan Formation crops out northeast of the “Nacimiento” fault through windows in an older, low-angle thrust fault that brings the Asuncion Group of Taliaferro (1943) (Upper Cretaceous) over the Franciscan Formation. The fault boundary between the Nacimiento and the Salinian blocks must therefore lie farther to the northeast, where it may be buried beneath the Asuncion Group and younger strata. This conclusion is supported by Hanna's recent aeromagnetic work (1969).

California↗
USGS1996

A seismic refraction and reflection study across the central San Jacinto Basin, Southern California

The San Jacinto Basin is a northwest-trending, pull-apart basin in the San Jacinto fault zone of the San Andreas fault system in southern California. About 24 km long and 2 to 4 km wide, the basin sits on a graben bounded by two strands of the San Jacinto fault zone: the Claremont Fault on the northeast and the Casa Loma Fault on the southwest. We present a case study of shallow structure (less than 1 km) in the central basin. A 2.75-km refraction line running from the northeast to southwest across the regional structural trend reveals a groundwater barrier (Offset I). Another line, bent southward and continued for 1.65-km, shows a crystalline basement offset (Offset III) near an inferred trace of the Casa Loma Fault. Although a basement refractor was not observed along the 2.75-km line, a mismatch between the estimate of its minimum depth and the basement depth determined for the 1.65-km line suggests that an offset in the basement (greater than 260 m) exists around the junction of the two refraction lines (Offset II). By revealing more faults and subtle sedimentary structures, the reflection stack sections confirm the two refraction offsets as faults. Offsets I and III each separate sediments of contrasting structures and, in addition, Offset III disrupts an unconformity. However, the sense and amount of the offset across Offset III contradict what may be expected across the Casa Loma Fault, which has its basinward basement down-thrown to about 2.5 km in the better defined southeastern part of the graben. The Casa Loma Fault trace has been mislinked in the existing geological maps and the trace should be remapped to Offset II where the reflector disruptions spread over a 400-m wide zone. Our Offset III is an unnamed, concealed fault.

Geophysics↗
USGS2006

Hydrogeologic framework and ground-water Flow in quaternary deposits at the U.S. Army Atterbury Joint Maneuver Training Center near Edinburgh, Indiana, 2002-2003

A hydrogeologic framework was developed for unconsolidated Quaternary deposits at the U.S. Army Atterbury Joint Maneuver Training Center. The framework describes the potential for the occurrence of ground water on the basis of physiography and the distribution of geologic materials within the study area. Four geologic units-the Jessup, Trafalgar, Atherton, and Martinsville Formations-were identified, and their distribution was mapped as four hydrogeologic regions. The Jessup and Trafalgar Formations are fine-grained, poorly sorted tills. At least two facies of the Atherton Formation, the lacustrine and outwash facies, are in the study area. The Martinsville Formation includes materials deposited or reworked since the glacial period. With the exception of the Atherton Formation outwash facies, the Quaternary deposits are primarily fine-grained, silt- and clay-rich sediments that function as confining layers or aquitards. The Atherton Formation out-wash facies includes sand and gravel deposits that constitute the primary aquifers in the study area. The four hydrogeologic regions mapped in this investigation are designated as the Bedrock, Jessup Till, Trafalgar Till, and Atherton Outwash Regions. Each region represents an area with a distinctive physiographic expression and vertical sequence of Quaternary deposits. The Bedrock Region in the western and southwestern part of the study area commonly is underlain by 0 to 15 feet of Martinsville Formation resting directly on bedrock. Potential ground-water yields are limited. The Jessup Till Region in the southeastern part of the study area includes the uplands on either side of the stream valleys. Sediments commonly range from 30 to 90 feet in thickness. This region includes clay-rich till of the Jessup Formation and sand and gravel deposits of the Atherton Formation outwash facies; the Atherton Formation outwash facies tends to be thin, and ground-water yields will be moderate. The Trafalgar Till Region in the north and northwest-central part of the study area commonly is underlain by 10 to 30 feet of Trafalgar till or Trafalgar till over 25 to 50 feet of Jessup till. Within, separating, and beneath these tills are deposits of the Atherton Formation outwash facies-the sand and gravel deposits with the best potential to support a water-supply well. Generally, the outwash facies in this region are thin sand and gravel lenses, except in a few locations that are in excess of 30 feet thick. The Atherton Outwash Region is the lowland area associated with the major valleys in all but the far southwestern part of the study area. This region has the greatest thickness of outwash facies sands and gravels (often in excess of 20 feet), which are the primary aquifers. In the Atterbury Joint Maneuver Training Center, the combined Atherton Outwash Region and the Trafalgar Till Region have the greatest potential as infiltration areas because of low topographic relief and(or) sandy soils. From water-level data collected in July and August 2003, horizontal ground-water flow was determined generally to be toward the Atherton Outwash Region and the valley of the Drift-wood River to the east. Vertical hydraulic gradients were documented at nested well pairs. At two sites, upwardly directed gradients are reflected by flowing wells. Ground-water discharge to surface water is likely in some eastern reaches of the valleys of Nineveh and Lick Creeks. In the valley of Nineveh Creek, potential for ground-water discharge is indicated by the presence of a flowing well, upwardly directed vertical hydraulic gradients, and ground-water heads that were higher than surface-water elevations. In the valley of Lick Creek, ground-water discharge also is indicated by the presence of flowing wells and ground-water heads that were higher than surface-water elevations.

Indiana↗
USGS1974

Structure of the continental margin of Liberia, West Africa

Geophysical surveys made by R/V Unitedgeo I (USGS–IDOE Cruise Leg 5), combined with earlier surveys and available geologic information, provide the basis for interpreting the structure of the continental margin of Liberia. This area lies at the junction of the Americas and Africa in published reconstructions of Gondwanaland prior to the opening of the North and South Atlantic in Jurassic and Cretaceous time, respectively. Three fracture zones (St. Paul, Cape Palmas, and Grand Cess) are inferred in the area southeast of 9°30′ W. on the basis of magnetic and gravity data, which is supported by bathymetric and seismic reflection data. The three fracture zones appear to exist as separate lineaments near the African coast. Farther seaward, they may be part of the same transform fault crossing the Atlantic (St. Paul fracture zone). The magnetic anomalies associated with these fracture zones, which may have originated in Cretaceous time at the opening of the South Atlantic, are continuous with magnetic anomalies over crust of Eburnean age (∼2,000 m.y.) in southeast Liberia and its continental shelf. This suggests that Eburnean age structures may have been zones of weakness that were reactivated in Cretaceous time. A positive gravity anomaly (∼50 mgal) along the coast and continental shelf of Liberia is attributed to deep crustal rocks that were uplifted and exposed in Pan-African time (∼550 m.y.). The land boundary of this anomaly coincides with a shear zone that marks the boundary between the Pan-African and the Liberian age province (∼2,700 m.y.); the shearing (in a thrust-fault sense) may be the result of compressive stress associated with the closing of a proto-Atlantic ocean. Liberian age magnetic anomalies in the area northwest of 9°30′ W. cross the Pan-African province (and the positive coastal gravity anomaly) and continue over the continental shelf and slope to about the 3,000-m bathymetric contour; the seaward limit of the anomalies is interpreted as representing the seaward limit of the old continental crust. This westward extension of the continental crust does not completely fill the gap in fit in various published reconstructions of Gondwanaland, and we suggest that the northern Florida block may have been located near the Liberian margin at one time. Magnetic data indicate a thick section of sedimentary rock, possibly as great as 8 km, on the continental slope. Comparison of gravity data over magnetically inferred basins in the shelf, slope, and rise suggests that low-density sedimentary rocks constitute a greater proportion of the section in basins beneath the shelf and beneath the slope and rise northwest of 9°30' W. than beneath the slope and rise in the area of the fracture zones. The gravitational attraction that corresponds to a crust-mantle boundary dipping 45° to 60° can be computed to fit observed data – as might be expected at a rifted continental margin. A shallow high-density block beneath the coast and continental shelf is required to fit the coastal positive anomaly; this block is represented by exposures on land of granulite-grade metamorphic rock of the Pan-African province.

Atlantic Ocean↗
USGS2010

Geologic map of the Artemis Chasma quadrangle (V-48), Venus

Artemis, named for the Greek goddess of the hunt, represents an approximately 2,600 km diameter circular feature on Venus, and it may represent the largest circular structure in our solar system. Artemis, which lies between the rugged highlands of Aphrodite Terra to the north and relatively smooth lowlands to the south, includes an interior topographic high surrounded by the 2,100-km-diameter, 25- to 200-km-wide, 1- to 2-km-deep circular trough, called Artemis Chasma, and an outer rise that grades outward into the surrounding lowland. Although several other chasmata exist in the area and globally, other chasmata have generally linear trends that lack the distinctive circular pattern of Artemis Chasma. The enigmatic nature of Artemis has perplexed researchers since Artemis Chasma was first identified in Pioneer Venus data. Although Venus' surface abounds with circular to quasi-circular features at a variety of scales, including from smallest to largest diameter features: small shield edifices (>1 km), large volcanic edifices (100-1,000 km), impact craters (1-270 km), coronae (60-1,010 km), volcanic rises and crustal plateaus (~1,500-2,500 km), Artemis defies classification into any of these groups. Artemis dwarfs Venus' largest impact crater, Mead (~280 km diameter); Artemis also lacks the basin topography, multiple ring structures, and central peak expected for large impact basins. Topographically, Artemis resembles some Venusian coronae; however Artemis is an order of magnitude larger than the average corona (200 km) and about twice the size of Heng-O Corona (which is 1,010 km in diameter), the largest of Venusian coronae. In map view Artemis' size and shape resemble volcanic rises and crustal plateaus; however, both of these classes of features differ topographically from Artemis. Volcanic rises and crustal plateaus form broad domical regions, and steep-sided regions with flat tops, respectively; furthermore, neither rises nor plateaus include circular troughs. So although it seems clear what Artemis is not, there is little consensus about what Artemis is, much less how Artemis formed. Debate during the past decade has resulted in the proposal of at least four hypotheses for Artemis' formation. The first (herein referred to as H1) is that Artemis Chasma represents a zone of northwest-directed convergence and subduction. The second hypothesis (herein referred to as H2) is that Artemis consists of a composite structure with a part of its interior region marking the exposure of deformed ductile deep-crustal rocks analogous to a terrestrial metamorphic core complex. The third (herein referred to as H3) is that Artemis reflects the surface expression of an ancient (>3.5 Ga) huge bolide impact event on cold strong lithosphere. The fourth hypothesis (herein referred to as H4) is that Artemis marks the surface expression of a deep mantle plume. Each of these hypotheses holds different implications for Venus geodynamics and evolution processes, and for terrestrial planet processes in general. Viability of H1 would provide support that terrestrial-like plate-tectonic processes once occurred on Earth's sister planet. The feasibility of H2 would require high values of crustal extension and therefore imply that significant horizontal displacements occurred on Venus-displacement that may or may not be related to terrestrial-like plate-tectonic processes. The possibility of H3 would suggest that Venus' surface is extremely old, and that Venus has experienced very little dynamic activity for the last 3.5 billion years or more; this would further imply that Venus is essentially tectonically dead, and has been for most of its history. This view contrasts strongly with studies that highlight a rich history of Venus including activity at least as young as 750 million years ago, and quite likely up to the present. If H4 has credibility, then Artemis could provide clues to cooling mechanisms of Earth's sister planet. Each of these hypotheses

Scientific Investigations Map↗
USGS1952

Hydrologic reconnaissance of the Green River in Utah and Colorado

The Green River, rising in Wyoming and draining high mountains in that state, northeast Utah and northwest Colorado, is a major tributary of the Colorado River. In the late summer, after the snow has melted from these mountains, the flow in the Green River reaches its minimum for the year. At that time a large proportion of the water in the river is returned to the atmosphere by evaporation and transpiration. During a 21-day period in September 1948, when the flow was least for the year, the average flow of the river as it entered Utah from Wyoming was 515 cfs. In the 437 miles of its course through Utah and Colorado evapotranspiration losses averaged 430 cfs. The average discharge of the Green River into the Colorado was about 975 cfs. Contributions to the river in Utah and Colorado totalled 890 cfsi including 560 from tributaries. The calculated ground-water inflow was about 330 cfs, of which about 75 percent was contributed within the Uinta Basin. Verv little ground water was contributed to the river in the lower 180 miles of its course, where the river flows through canyon lands of the Colorado Plateaus. These estimates are based upon information collected during a boat reconnaissance in September 1948, and upon data available from stream-gaging stations along the Green River and many of its tributaries. From these data an accounting was made of the water--as to both quantity and quality--in several segments of the river. For each segment determinations were made of the surface outflow, loss by evapotranspiration, and surface- and ground-water inflow. During the reconnaissance information was also obtained as to the relation of stream flow to regional geology and ground-water hydrology. No detailed hydrologic studies have yet been made within the drainage basin of the Green River. On the basis of this recomiaissance, detailed studies in the Uinta Basin, Browns Park, and Echo Park areas are recommended as highly desirable, because of the possible relations of ground-water hydrology to river-basin development projects. Similar reconnaissance can be of value in delineating the areas where detailed hydrologic studies would be most fruitful throughout the upper Colorado River basin.

Colorado, Utah↗
USGS2003

Geologic map of the Bonners Ferry 30' x 60' quadrangle, Idaho and Montana

This data set maps and describes the geology of the Bonners Ferry 30' x 60' quadrangle, Idaho and Montana. The bedrock geology of the Bonners Ferry quadrangle consists of sedimentary, metamorphic, and granitic rocks ranging in age from Middle Proterozoic to Eocene. Bedrock units include rocks of (1) the Middle Proterozoic Belt Supergroup (2) the Middle Proterozoic Deer Trail Group, (3) the Late Proterozoic Windermere Group, (4) miogeoclinal or shelf facies lower Paleozoic rocks, and (5) Mesozoic and Tertiary granitic rocks. The Belt Supergroup, a thick sequence of argillite, siltite, quartzite, and impure carbonate rocks up to 9,000 m thick, occurs in two non-contiguous sequences in the quadrangle: (1) the Clark Fork-Eastport Sequence east of the Purcell trench and (2) the Newport Sequence in the hanging wall of the Newport Fault. Only the two lowest Belt formations of the Newport Sequence are found in the Bonners Ferry quadrangle, but these two units are part of a continuous section, which extends southwestward to the town of Newport. Belt Supergroup rocks of the Clark Fork-Eastport Sequence are separated from those of the Newport Sequence by the Newport Fault, Priest River Complex, and Purcell Trench Fault. Some formations of the Belt Supergroup show differences in thickness and (or) lithofacies from one sequence to the other that are greater than those predicted from an empirical depositional model for the distances currently separating the sequences. These anomalous thickness and facies differences suggest that there has been a net contraction along structures separating the sequences despite Eocene extension associated with emplacement of the Priest River Complex. In addition to these two Belt sequences, probable Belt rocks are present in the Priest River Complex as high metamorphic grade crystalline schist and gneiss. Northwest of the Newport Sequence of Belt Supergroup is the Deer Trail Group, a distinct Middle Proterozoic sequence of argillite, siltite, quartzite, and carbonate rocks lithostratigraphically similar to the Belt Supergroup, but separated from all Belt Supergroup rocks by the Jumpoff Joe Fault. Rocks of the Deer Trail Group are pervasively phyllitic and noticeably more deformed than rocks in the Belt Supergroup sequences. Lithostratigraphically the Deer Trail Group is equivalent to part of the upper part of the Belt Supergroup. Differences in lithostratigraphy and thickness between individual Deer Trail and Belt units and between the Deer Trail and Belt sequences as a whole indicate that they were probably much farther apart when they were deposited. The Windermere Group is a lithologically varied sequence of volcanic rocks and coarse-grained, mostly immature, clastic sedimentary rocks up to 8,000 m thick. It is characterized by extreme differences in thickness and lithofacies over short distances caused by syndepositional faulting associated with initial stages of continental rifting in the Late Proterozoic. Strata of the Windermere Group unconformably overlie only the Deer Trail Group, and are nowhere found in depositional contact with Belt Supergroup rocks. Paleozoic rocks in the Bonners Ferry quadrangle consist of a thin, fault-bounded remnant preserved within the Clark Fork-Eastport Belt Supergroup Sequence. Mesozoic granitic rocks underlie at least 50 percent of the Bonners Ferry quadrangle. They fall into two petrogenetic suites, hornblende-biotite plutons and muscovite-biotite (two-mica) plutons, most of which are Cretaceous in age. Both suites are represented in the mid-crustal Priest River Complex and in the higher level plutons that flank the complex; by far the majority of the Priest River Complex are Cretaceous, two-mica bodies. Tertiary rocks are restricted to a single small stock, numerous hypabyssal dikes that are too small to show at the scale of the map, and to cataclastic rocks related to the Newport Fault. Quaternary deposits include unconsolidated to poorl

Miscellaneous Field Studies Map↗
USGS1978

A sediment-dispersal model for the South Texas continental shelf, northwest Gulf of Mexico

Textural-distribution patterns of sea-floor sediments on the South Texas continental shelf between Matagorda Bay and the U.S.-Mexico international boundary were evaluated as part of a regional environmental-studies program. Sediment textural gradients support a conceptual model for the regional sediment-dispersal system, which is characterized by both net offshore transport and net south-trending coastwise transport components on a wind-dominated shelf. Coastwise transport results in the net southward migration of both palimpsest sandy mud composing the ancestral Brazos-Colorado delta flank in the northern sector, and modern mud composing the central sector; these migrating sediments are encroaching southward onto immobile relict muddy sands composing the ancestral Rio Grande delta in the southern sector. In the proposed model, the suspension transport of modern silt-enriched mud derived mainly from coastal sources is the dominant dispersal mechanism. Net offshore transport is attributed both to diffusion, and to the advective ebb-tide discharge of turbid lagoonal-estuarine waters from coastal inlets. Net southward transport is attributed mainly to advection by seasonally residual coastwise drift currents reflecting a winter-dominated hydraulic regime. Frequent winter storms characterized by relatively high-speed northerly winds that accompany the passage of cold fronts appear to be dominant regional dispersal agents.

Texas↗
USGS2003

Topographic map of the northwest Loire Valles region of Mars MTM 500k -15/337E OMKT

This map, compiled photogrammetrically from Viking Orbiter stereo image pairs, is part of a series of topographic maps of areas of special scientific interest on Mars. MTM 500k –15/337E OMKT: Abbreviation for Mars Transverse Mercator; 1:500,000 series; center of sheet latitude 15° S., longitude 337.5° E. in planetocentric coordinate system (this corresponds to –15/022; latitude 15° S., longitude 22.5° W. in planetographic coordinate system); orthophotomosaic (OM) with color coded (K) topographic contours and nomenclature (T) [Greeley and Batson, 1990]. The figure of Mars used for the computation of the map projection is an oblate spheroid (flattening of 1/176.875) with an equatorial radius of 3396.0 km and a polar radius of 3376.8 km (Kirk and others, 2000). The datum (the 0–km contour line) for elevations is defined as the equipotential surface (gravitational plus rotational) whose average value at the equator is equal to the mean radius as determined by Mars Orbiter Laser Altimeter (Smith and others, 2001). The image base for this map employs Viking Orbiter images from orbit 651. An orthophotomosaic was created on the digital photogrammetric workstation using the DTM compiled from stereo models. Integrated Software for Imagers and Spectrometers (ISIS) (Torson and Becker, 1997) provided the software to project the orthophotomosaic into the Transverse Mercator Projection.

IMAP↗
USGS2019

Evaluation of chemical and hydrologic processes in the eastern Snake River Plain Aquifer based on results from geochemical modeling, Idaho National Laboratory, eastern Idaho

Nuclear research activities at the U.S. Department of Energy (DOE) Idaho National Laboratory (INL) produced liquid and solid chemical and radiochemical wastes that were disposed to the subsurface resulting in detectable concentrations of some waste constituents in the eastern Snake River Plain (ESRP) aquifer. These waste constituents may affect the water quality of the aquifer and may pose risks to the eventual users of the aquifer water. To understand these risks to water quality the U.S. Geological Survey, in cooperation with the DOE, conducted geochemical mass-balance modeling of the ESRP aquifer to improve the understanding of chemical reactions, sources of recharge, mixing of water, and groundwater flow directions in the shallow (upper 250 feet) aquifer at the INL. Modeling was conducted using the water chemistry of 127 water samples collected from sites at and near the INL. Water samples were collected between 1952 and 2017 with most of the samples collected during the mid-1990s. Geochemistry and isotopic data used in geochemical modeling consisted of dissolved oxygen, carbon dioxide, major ions, silica, aluminum, iron, and the stable isotope ratios of hydrogen, oxygen, and carbon. Geochemical modeling results indicated that the primary chemical reactions in the aquifer were precipitation of calcite and dissolution of plagioclase (An 60 ) and basalt volcanic glass. Secondary minerals other than calcite included calcium montmorillonite and goethite. Reverse cation exchange, consisting of sodium exchanging for calcium on clay minerals, occurred near site facilities where large amounts of sodium were released to the ESRP aquifer in wastewater discharge. Reverse cation exchange acted to retard the movement of wastewater-derived sodium in the aquifer. Regional groundwater inflow was the primary source of recharge to the aquifer underlying the Northeast and Southeast INL Areas. Birch Creek (BC), the Big Lost River (BLR), and groundwater from BC valley provided recharge to the North INL Area, and the BLR and groundwater from BC and Little Lost River (LLR) valleys provided recharge to the Central INL Area. The BLR, groundwater from the BLR and LLR valleys and the Lost River Range, and precipitation provided recharge to the Northwest and Southwest INL Areas. The primary source of recharge west and southwest of the INL was groundwater inflow from BLR valley. Upwelling geothermal water was a small source of recharge at two wells. Aquifer recharge from surface water in the northern, central, and western parts of the INL indicated that the aquifer in these areas was a dynamic, open system, whereas the aquifer in the eastern part of the INL, which receives little recharge from surface water, was a relatively static and closed system. Sources of recharge identified from isotope ratios and geochemical modeling (major ion concentrations) were nearly identical for the North, Northeast, Southeast, and Central INL Areas, which indicated that both methods probably accurately identified the sources of recharge in these areas. Conversely, isotope ratios indicated that the BLR and groundwater from the LLR valley provided most recharge to the western parts of the Northwest and Southwest INL Areas, whereas geochemical modeling results indicated a smaller area of recharge from the BLR and groundwater from the LLR valley, a larger area of recharge from the Lost River Range, and recharge of groundwater from the BLR valley that extended to the west INL boundary. The results from geochemical modeling probably were more accurate because major ion concentrations, but not isotope ratios, were available to characterize groundwater from the BLR valley and the Lost River Range. Sources of recharge identified with a groundwater flow model (using particle tracking) and geochemical modeling were similar for the Northeast and Southeast INL Areas. However, differences between the models were that the geochemical model represented (1) recharge of groundwater from the Lost River Range in the western part of the INL, whereas the flow model did not, (2) recharge of groundwater from the BC and BLR valleys extending farther south and east, respectively, than the flow model, and (3) more recharge from the BLR in the Southwest INL Area than the flow model. Mixing of aquifer water beneath the INL included (1) mixing of regional groundwater and water from the BC valley in the Northeast and Southeast INL Areas and (2) mixing of surface water (primarily from the BLR) and groundwater across much of the North, Central, Northwest, and Southwest INL Areas. Localized recharge from precipitation mixed with groundwater in the Northwest and Southwest INL Areas, and localized upwelling geothermal water mixed with groundwater in the Central and Northeast INL Areas. Flow directions of regional groundwater were south in the eastern part of the INL and south-southwest at downgradient locations. Groundwater from the BC and LLR valleys initially flowed southeast before changing to south-southwest flow directions that paralleled regional groundwater, and groundwater from the BLR valley initially flowed south before changing to a southsouthwest direction. Wastewater-contaminated groundwater flowed south from the Idaho Nuclear Technology and Engineering Center (INTEC) infiltration ponds in a narrow plume, with the percentage of wastewater in groundwater decreasing due to dilution, dispersion, and (or) degradation from about 60‒80 percent wastewater 0.7‒0.8 mile (mi) south of the INTEC infiltration ponds to about 1.4 percent wastewater about 15.5 mi south of the INTEC infiltration ponds. Wastewater contaminated groundwater flowed southeast and then southwest from the Naval Reactors Facility industrial waste ditch, with the percentage of wastewater in groundwater decreasing from about 100 percent wastewater adjacent to the waste ditch to about 2 percent wastewater about 0.6 mi south of the waste ditch.

Idaho↗
USGS2000

The Beaver River structure: A cross-strike discontinuity of possible crustal dimensions in the southern Mackenzie Fold Belt, Yukon and Northwest territories, Canada

A significant cross-strike structural discontinuity, the Beaver River Structure, has been recognized near the boundary between the north-central part of the Mackenzie Fold Belt and its southern part, the Liard Plateau. The Beaver River Structure is the northeast continuation of the Beaver Fault toward the confluence of the South Nahanni and Liard rivers and into the Interior Platform. It is oriented sub-parallel with the Liard Line farther south. Cumulative Laramide-aged dextral movement of 10 to 20 kilometres is inferred to have occurred along the Beaver River Structure. Small dextral offsets occur along the Beaver Fault, a possible surface manifestation of the Beaver River Structure and large, dominantly north-south oriented Laramide-aged folds and faults, such as the Kotaneelee and Liard synclines and the Nahanni Thrust Fault appear to have been locally rotated in a manner consistent with dextral strike-slip of at least 10 to 20 kilometres. The absence of Permian and Triassic strata in the Mackenzie Fold Belt north of the Beaver River Structure may indicate that uplift and erosion occurred north of the Beaver River Structure during the Early Cretaceous Columbian Orogeny. It is likely that the Beaver River Structure is an ancient, possibly Precambrian, structure that has been reactivated several times throughout Phanerozoic time.

British Columbia, Northwest Territories, Yukon↗
USGS2020

Preliminary bedrock geologic map of the Lahore 7.5-minute quadrangle, Orange, Spotsylvania, and Louisa Counties, Virginia

Introduction Bedrock geologic mapping of the Lahore, Va., 7.5-minute quadrangle was completed as part of a broader project, undertaken jointly between the U.S. Geological Survey, the Virginia Division of Geology and Mineral Resources, and other Federal and State agencies to better understand the causative mechanisms of the magnitude-5.8 (M5.8) earthquake that occurred near Mineral, Va., on August 23, 2011. This project involved detailed mapping of eight quadrangles in the epicentral region of the Mineral, Va., earthquake in order to improve our understanding of the geologic framework of the central Virginia seismic zone, which has a long record of historical and prehistoric seismicity. The Lahore 7.5-minute quadrangle contains the contact between Ordovician to Silurian, dioritic and granodioritic rocks of the Lahore and Ellisville plutons and older metasedimentary and metavolcanic rocks. The Lahore quadrangle is northeast of the Ferncliff and Louisa, Va., quadrangles, where the Shores complex is intruded by the Ellisville pluton along the pluton’s southwestern margin. The new mapping in the Lahore quadrangle shows that the Shores complex continues northeast of the Ellisville pluton. A northeast-trending mafic- and ultramafic-bearing belt within the Shores complex is a fault-bounded accretionary zone (accretionary wedge) between rocks of the Chopawamsic Formation and Laurentian slope-and-rise deposits. In the Lahore quadrangle, this belt contains several mappable, northeast- to southwest-trending mafic bodies and also includes small exposures of gabbro and talc schist. The Lahore quadrangle contains structures of both early- and late-Paleozoic age that correspond to the Taconic and Alleghanian orogenies. Taconic (Late Ordovician) S 1 schistosity in layered rocks is typically fine-grained and parallel to compositional layering, when present. Alleghanian (Pennsylvanian) S 2 schistosity is coarser and more micaceous than S 1 and is locally accompanied by a lineation that is represented by mineral lineations, micro-crenulations, or mullion fabric, and represents the hinges of F 2 folds. A foliation in the plutonic rocks is represented by an equilibrium assemblage of aligned mafic minerals and is early Paleozoic in age. Metamorphic grade in the non-plutonic rocks of the Lahore quadrangle ranges from lower-greenschist to the northwest to upper-greenschist to the southeast, as represented by mineral assemblages in non-plutonic rocks. The biotite isograd may be, in part, lithologically controlled by the contact between the informally-named Hardware and Byrd Mill formations, and locally affected by contact metamorphism by the Lahore pluton (western part of map). The Taconic garnet isograd is defined by the sparse presence of small (less than 1 millimeter), euhedral garnet crystals. Both the biotite and garnet isograds continue along strike to the southwest into the Ferncliff and Louisa quadrangles, where the isograds have been identified as Ordovician age (Taconic orogeny) based on muscovite, biotite, and amphibole 40 Ar/ 39 Ar cooling ages. Regionally, the most common trend and plunge of joints is northwest and subvertical, respectively, and orthogonal to the regional strike of foliation. Early Mesozoic extension may have reactivated the Harris Creek fault (southeast corner of map), a late Paleozoic (Alleghanian orogeny) transpressional fault that marks the contact between granodiorite of the Ellisville pluton and the Chopawamsic Formation.

Virginia↗
USGS1984

Reconnaissance geology of the Zarghat Quadrangle, sheet 26/40 B, Kingdom of Saudi Arabia

The Zarghat quadrangle is located in the northern Precambrian shield of Saudi Arabia between lat 26°30' and 27°00' N. and long 41°00' and 41°30 ' E. The area is underlain by three Precambrian volcanosedimentary units and a range of Precambrian dioritoid and granitoid plutonic intrusive rocks. Paleozoic(?) sandstone crops out in small areas in the northwestern part of the quadrangle, and a lobe of QuaternaryC?) basalt from Harrat Ithnain penetrates the southwest corner of the quadrangle. The Banana greenstone, the oldest unit in the quadrangle, is composed of basic to intermediate volcanic and subvolcanic rocks and minor interbedded marble that have been metamorphosed to greenschist-facies assemblages. The volcanic rocks range from basalt to andesite and dacite, and the subvolcanic rocks are diabase and diorite. Two less-metamorphosed Precambrian units, the Hadn formation and the Zarghat formation, unconformably overlie the Banana greenstone. The Hadn formation is composed of predominantly rhyolitic to dacitic volcanic rock and minor amounts of continental sedimentary rock; it is exposed only in the east half of the quadrangle. The Zarghat formation is also rhyolitic to dacitic volcanic rock but contains much more sedimentary rock that appears to have been deposited in a shallow-marine environment. The relation between these two formations is not clear at this time. Two groups of intrusive rocks are recognized on the basis of their ages relative to the Hadn and Zarghat formations. An older group is composed of hornblende quartz diorite, granodiorite, tonalite, and lesser amounts of granite. Tnese rocks intrude the Banana greenstone but predate the Hadn and Zarghat formations. Post-Hadn/Zarghat intrusive rocks are voluminous undivided granite, several varieties of alkali-feldspar granite, monzogranite, granophyre, hypabyssal rhyolite, aplite, diabase, and gabbro. The structural grain within the quadrangle appears to trend north-south. The Precambrian volcanosedimentary rocks and older plutonic rocks define three major north-trending lithologic belts. The Zarghat formation makes up the westernmost belt, and the Hadn formation comprises the easternmost belt. The central belt consists of Banana greenstone and older plutonic rocks. The north-south structural grain is crosscut by large plutons that postdate the Hadn and Zarghat formations. The dominant faults in the area belong to a northeast-trending system of shears; less common fault orientations are northwesterly, northerly, and east-westerly. Outcrops of magnesite in the southwest corner of the quadrangle constitute the only known economic potential in the area.

Open-File Report↗
USGS2019

Postglacial faulting near Crater Lake, Oregon, and its possible association with the Mazama caldera-forming eruption

Volcanoes of subduction-related magmatic arcs occur in a variety of crustal tectonic regimes, including where active faults indicate arc-normal extension. The Cascades arc volcano Mount Mazama overlaps on its west an ∼10-km-wide zone of ∼north-south–trending normal faults. A lidar (light detection and ranging) survey of Crater Lake National Park, reveals several previously unrecognized faults west of the caldera. Postglacial vertical separations measured from profiles across scarps range from ∼2 m to as much as 12 m. Scarp profiles commonly suggest two or more postglacial surface-rupturing events. Ignimbrite of the ca. 7.6 ka climactic eruption of Mount Mazama, during which Crater Lake caldera formed, appears to bury fault strands where they project into thick, valley-filling ignimbrite. Lack of lateral offset of linear features suggests principally normal displacement, although predominant left stepping of scarp strands implies a component of dextral slip. West-northwest–east-southeast and north-northwest–south-southeast linear topographic elements, such as low scarps or ridges, shallow troughs, and straight reaches of streams, suggest that erosion was influenced by distributed shear, consistent with GPS vectors and clockwise rotation of the Oregon forearc block. Surface rupture lengths (SRL) of faults suggest earthquakes of (moment magnitude) M w 6.5 from empirical scaling relationships. If several faults slipped in one event, a combined SRL of 44 km suggests an earthquake of M w 7.0. Postglacial scarps as high as 12 m imply maximum vertical slip rates of 1.5 mm/yr for the zone west of Crater Lake, considerably higher than the ∼0.3 mm/yr long-term rate for the nearby West Klamath Lake fault zone. An unanswered question is the timing of surface-rupturing earthquakes relative to the Mazama climactic eruption. The eruption may have been preceded by a large earthquake. Alternatively, large surface-rupturing earthquakes may have occurred during the eruption, a result of decrease in east-west compressive stress during ejection of ∼50 km 3 of magma and concurrent caldera collapse.

Oregon↗
USGS2004

The offshore Palos Verdes fault zone near San Pedro, Southern California

High-resolution seismic-reflection data are combined with a variety of other geophysical and geological data to interpret the offshore structure and earthquake hazards of the San Pedro shelf, near Los Angeles, California. Prominent structures investigated include the Wilmington graben, the Palos Verdes fault zone, various faults below the west part of the San Pedro shelf and slope, and the deep-water San Pedro basin. The structure of the Palos Verdes fault zone changes markedly along strike southeastward across the San Pedro shelf and slope. Under the north part of the shelf, this fault zone includes several strands, with the main strand dipping west. Under the slope, the main fault strands exhibit normal separation and mostly dip east. To the southeast near Lasuen Knoll, the Palos Verdes fault zone locally is low angle, but elsewhere near this knoll, the fault dips steeply. Fresh seafloor scarps near Lasuen Knoll indicate recent fault movement. We explain the observed structural variation along the Palos Verdes fault zone as the result of changes in strike and fault geometry along a master right-lateral strike-slip fault at depth. Complicated movement along this deep fault zone is suggested by the possible wave-cut terraces on Lasuen Knoll, which indicate subaerial exposure during the last sea level lowstand and subsequent subsidence of the knoll. Modeling of aeromagnetic data indicates a large magnetic body under the west part of the San Pedro shelf and upper slope. We interpret this body to be thick basalt of probable Miocene age. This basalt mass appears to have affected the pattern of rock deformation, perhaps because the basalt was more competent during deformation than the sedimentary rocks that encased the basalt. West of the Palos Verdes fault zone, other northwest-striking faults deform the outer shelf and slope. Evidence for recent movement along these faults is equivocal, because we lack age dates on deformed or offset sediment.

California↗
USGS2018

Sulfur isotopes of host strata for Howards Pass (Yukon–Northwest Territories) Zn-Pb deposits implicate anaerobic oxidation of methane, not basin stagnation

A new sulfur isotope stratigraphic profile has been developed for Ordovician-Silurian mudstones that host the Howards Pass Zn-Pb deposits (Canada) in an attempt to reconcile the traditional model of a stagnant euxinic basin setting with new contradictory findings. Our analyses of pyrite confirm the up-section 34 S enrichment reported previously, but additional observations show parallel depletion of carbonate 13 C, an increase in organic carbon weight percent, and a change in pyrite morphology. Taken together, the data suggest that the 34 S enrichment reflects a transition in the mechanism of pyrite formation during diagenesis, not isotopic evolution of a stagnant water mass. Low in the stratigraphic section, pyrite formed mainly in the sulfate reduction zone in association with organic matter–driven bacterial sulfate reduction. In contrast, starting just below the Zn-Pb mineralized horizon, pyrite formed increasingly within the sulfate-methane transition zone in association with anaerobic oxidation of methane. Our new insights on diagenesis have implications for (1) the setting of Zn-Pb ore formation, (2) the reliability of redox proxies involving metals, and (3) the source of ore sulfur for Howards Pass, and potentially for other stratiform Zn-Pb deposits contained in carbonaceous strata.

Northwest Territories, Yukon↗
USGS2008

Analysis of a spatial point pattern: Examining the damage to pavement and pipes in Santa Clara Valley resulting from the Loma Prieta earthquake

This report describes some simple spatial statistical methods to explore the relationships of scattered points to geologic or other features, represented by points, lines, or areas. It also describes statistical methods to search for linear trends and clustered patterns within the scattered point data. Scattered points are often contained within irregularly shaped study areas, necessitating the use of methods largely unexplored in the point pattern literature. The methods take advantage of the power of modern GIS toolkits to numerically approximate the null hypothesis of randomly located data within an irregular study area. Observed distributions can then be compared with the null distribution of a set of randomly located points. The methods are non-parametric and are applicable to irregularly shaped study areas. Patterns within the point data are examined by comparing the distribution of the orientation of the set of vectors defined by each pair of points within the data with the equivalent distribution for a random set of points within the study area. A simple model is proposed to describe linear or clustered structure within scattered data. A scattered data set of damage to pavement and pipes, recorded after the 1989 Loma Prieta earthquake, is used as an example to demonstrate the analytical techniques. The damage is found to be preferentially located nearer a set of mapped lineaments than randomly scattered damage, suggesting range-front faulting along the base of the Santa Cruz Mountains is related to both the earthquake damage and the mapped lineaments. The damage also exhibit two non-random patterns: a single cluster of damage centered in the town of Los Gatos, California, and a linear alignment of damage along the range front of the Santa Cruz Mountains, California. The linear alignment of damage is strongest between 45° and 50° northwest. This agrees well with the mean trend of the mapped lineaments, measured as 49? northwest.

California↗
USGS2022

Hydrologic effects of leakage from the Catskill Aqueduct on the bedrock-aquifer system near High Falls, New York, November 2019–January 2020

Historical observations by the New York City Department of Environmental Protection (NYCDEP) indicate that the Rondout pressure tunnel has been leaking in the vicinity of the hamlet of High Falls, New York. In the 74 days from November 11, 2019, to January 23, 2020, NYCDEP shut down and partially dewatered the pressure tunnel for inspection and repairs. On November 5–7, 2019 (during normal tunnel operations), and on January 21–22, 2020 (when the tunnel was shut down), the U.S. Geological Survey used a network of 31 groundwater wells to collect water-level elevations and determine the potentiometric surface of the bedrock aquifer adjacent to the Rondout pressure tunnel. When the tunnel was fully pressurized during normal operations, water levels indicated a two-mile-long groundwater mound which trended northeastward, approximately along the regional strike of the bedrock units. The mound ranged in elevation from 250 to 300 feet (ft) above the North American Vertical Datum of 1988 and extended from 1,500 ft southwest of a suspected leak at the Rondout pressure tunnel to about 8,500 ft northeast of the possible leak. During the 74-day shutdown, during which the aqueduct was nonoperational, this groundwater mound decreased in magnitude and extent as it reverted to equilibrium conditions. This resulted in a flattening of the potentiometric surface, represented by two remnant groundwater plateaus. Water-level differences were calculated for wells that may be affected by potential tunnel leakage to determine the influence on the local bedrock aquifer. The five largest water-level differences (77, 61, 49, 42, and 41 ft) occurred in wells that were generally aligned with the northeastward trend of regional bedrock strike; these wells may penetrate the karstic Helderberg Group bedrock unit. Near the suspected tunnel leak, the Helderberg Group overlies the Binnewater Sandstone and the High Falls Shale, both of which produced substantial groundwater inflows during the construction of the Rondout pressure tunnel. Water levels in wells penetrating the Shawangunk Formation just east of Rondout Creek, where the unit is in contact with the High Falls Shale, and in wells penetrating the Esopus Shale, which is adjacent to the Helderberg Group and northwest of the tunnel leak, may be affected by tunnel leakage. It is unclear if water levels in a well 9,000 ft northwest of the suspected tunnel leak are influenced by the tunnel leakage, by another source of artificial recharge, or by both. This well penetrates the Onondaga Limestone in the northwestern part of the study area. An unconsolidated aquifer composed of stratified gravel, sand, silt, and clay overlies the limestone bedrock in this part of study area―additional study is required to determine if this unconsolidated aquifer is affected by tunnel leakage.

New York↗