Geology Reports⌕ Search

USGS · ofr20221119

Hydrologic effects of leakage from the Catskill Aqueduct on the bedrock-aquifer system near High Falls, New York, November 2019–January 2020

Abstract

Historical observations by the New York City Department of Environmental Protection (NYCDEP) indicate that the Rondout pressure tunnel has been leaking in the vicinity of the hamlet of High Falls, New York. In the 74 days from November 11, 2019, to January 23, 2020, NYCDEP shut down and partially dewatered the pressure tunnel for inspection and repairs. On November 5–7, 2019 (during normal tunnel operations), and on January 21–22, 2020 (when the tunnel was shut down), the U.S. Geological Survey used a network of 31 groundwater wells to collect water-level elevations and determine the potentiometric surface of the bedrock aquifer adjacent to the Rondout pressure tunnel. When the tunnel was fully pressurized during normal operations, water levels indicated a two-mile-long groundwater mound which trended northeastward, approximately along the regional strike of the bedrock units. The mound ranged in elevation from 250 to 300 feet (ft) above the North American Vertical Datum of 1988 and extended from 1,500 ft southwest of a suspected leak at the Rondout pressure tunnel to about 8,500 ft northeast of the possible leak. During the 74-day shutdown, during which the aqueduct was nonoperational, this groundwater mound decreased in magnitude and extent as it reverted to equilibrium conditions. This resulted in a flattening of the potentiometric surface, represented by two remnant groundwater plateaus. Water-level differences were calculated for wells that may be affected by potential tunnel leakage to determine the influence on the local bedrock aquifer. The five largest water-level differences (77, 61, 49, 42, and 41 ft) occurred in wells that were generally aligned with the northeastward trend of regional bedrock strike; these wells may penetrate the karstic Helderberg Group bedrock unit. Near the suspected tunnel leak, the Helderberg Group overlies the Binnewater Sandstone and the High Falls Shale, both of which produced substantial groundwater inflows during the construction of the Rondout pressure tunnel. Water levels in wells penetrating the Shawangunk Formation just east of Rondout Creek, where the unit is in contact with the High Falls Shale, and in wells penetrating the Esopus Shale, which is adjacent to the Helderberg Group and northwest of the tunnel leak, may be affected by tunnel leakage. It is unclear if water levels in a well 9,000 ft northwest of the suspected tunnel leak are influenced by the tunnel leakage, by another source of artificial recharge, or by both. This well penetrates the Onondaga Limestone in the northwestern part of the study area. An unconsolidated aquifer composed of stratified gravel, sand, silt, and clay overlies the limestone bedrock in this part of study area―additional study is required to determine if this unconsolidated aquifer is affected by tunnel leakage.

Explore related subjects

90° N90° S · 180° W ← longitude → 180° E
Source-reported bounding extent: 41.81386050567838° to 41.83891091453262° latitude; -74.14864237225162° to -74.10844803029782° longitude. This indicates report coverage, not an exact sampling location. View area on OpenStreetMap.

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Anthony Chu, Michael L. Noll, William D. Capurso. 2022-12-27. Hydrologic effects of leakage from the Catskill Aqueduct on the bedrock-aquifer system near High Falls, New York, November 2019–January 2020. https://doi.org/10.3133/ofr20221119

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related USGS reports

ECCOE Landsat quarterly calibration and validation report—Quarter 2, 2026

Executive Summary The U.S. Geological Survey Earth Resources Observation and Science Calibration and Validation (Cal/Val) Center of Excellence (ECCOE) focuses on improving the accuracy, precision, calibration, and product quality of remote-sensing data, leveraging years of multiscale optical system geometric and radiometric calibration and characterization experience. The ECCOE Landsat Cal/Val Team continually monitors the geometric and radiometric performance of active Landsat missions and makes calibration adjustments, as needed, to maintain data quality at the highest level. This report provides observed geometric and radiometric analysis results for Landsats 8 and 9 for quarter 2 (April–June), 2026. All data used to compile the Cal/Val analysis results presented in this report are freely available from the U.S. Geological Survey EarthExplorer website: https://earthexplorer.usgs.gov.

Open-File Report↗

ECCOE Landsat quarterly calibration and validation report—Quarter 1, 2026

Executive Summary The U.S. Geological Survey Earth Resources Observation and Science Calibration and Validation (Cal/Val) Center of Excellence (ECCOE) focuses on improving the accuracy, precision, calibration, and product quality of remote-sensing data, leveraging years of multiscale optical system geometric and radiometric calibration and characterization experience. The ECCOE Landsat Cal/Val Team continually monitors the geometric and radiometric performance of active Landsat missions and makes calibration adjustments, as needed, to maintain data quality at the highest level. This report provides observed geometric and radiometric analysis results for Landsats 8 and 9 for quarter 1 (January–March) of 2026. All data used to compile the Cal/Val analysis results presented in this report are freely available from the U.S. Geological Survey EarthExplorer website: https://earthexplorer.usgs.gov . One specific activity that the ECCOE Landsat Cal/Val Team closely monitored was a Landsat 8 Thermal Infrared Sensor encoder alerts anomaly. On March 18, 2026, the Thermal Infrared Sensor instrument’s mechanism control electronics board reset, driving several parameters to default power-on values. Subsequent telemetry and analysis determined that no persistent hardware misconfiguration was present and no radiometric or geometric degradation was observed.

Open-File Report↗

Floods of June 20–July 6, 2024, in the Big Sioux River, Rock River, Little Sioux River, Ocheyedan River, and Floyd River Basins, northwestern Iowa

Major flooding occurred on June 20–July 6, 2024, in northwestern Iowa affecting the Big Sioux, Rock, Little Sioux, Ocheyedan, and Floyd River Basins. Heavy rain fell in northwestern Iowa, southwestern Minnesota, and southeastern South Dakota on June 20–22, 2024. Parts of northwestern Iowa recorded 2–6 inches of rainfall and localized amounts exceeding 12 inches. A maximum peak-of-record streamflow of 175,000 cubic feet per second at the U.S. Geological Survey streamgage Big Sioux River at Akron, Iowa (06485500), was recorded on June 22, 2024, and had an annual exceedance probability range of 0.2–0.49 percent. High-water marks were measured at four locations along the Big Sioux River between U.S. Interstate 29 at Sioux City, Iowa, upstream to Iowa Highway 10 north of Hawarden, Iowa, a distance of 75.7 river miles. A maximum peak-of-record streamflow of 157,000 cubic feet per second at the U.S. Geological Survey streamgage Rock River near Rock Valley, Iowa (06483500), was recorded on June 22, 2024, and had an annual exceedance probability of less than 0.2 percent. High-water marks were measured at eight locations along the Rock River between County Road B30 east of Hudson, South Dakota, upstream to Iowa Highway 9 at Rock Rapids, Iowa, a distance of 39.3 river miles. A maximum peak-of-record streamflow of 63,000 cubic feet per second at the U.S. Geological Survey streamgage Little Sioux River at Correctionville, Iowa (06606600), was recorded on June 24, 2024, and had an annual exceedance probability range of 0.2–0.49 percent. High-water marks were measured at 11 locations along the Little Sioux River between Iowa Highway 31 west of Correctionville, Iowa, upstream to U.S. Highway 18 north of Spencer, Iowa, a distance of 134.8 river miles. A maximum streamflow of 24,500 cubic feet per second at the U.S. Geological Survey streamgage Ocheyedan River near Spencer, Iowa (06605000), was recorded on June 22, 2024, and had an annual exceedance probability range of 0.2–0.49 percent. High-water marks were measured at three locations along the Ocheyedan River between County Road M38 west of Spencer, Iowa, upstream to U.S. Highway 18 west of Everly, Iowa, a distance of 12.8 river miles. A maximum streamflow of 41,000 cubic feet per second at the U.S. Geological Survey streamgage Floyd River at Alton, Iowa (06600100), was recorded on June 22, 2024, and had an annual exceedance probability range of 1–1.99 percent. High-water marks were measured at six locations along the Floyd River between Iowa Highway 3 at Le Mars, Iowa, upstream to Iowa Highway 10 at Alton, Iowa, a distance of 27.5 river miles. The high-water marks were used to develop flood profiles for the Big Sioux, Rock, Little Sioux, Ocheyedan, and Floyd Rivers.

Iowa, Minnesota, South Dakota↗