Geology Reports⌕ Search

SEARCH · Geology Reports

Results for “INformation”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,531 records · Page 85Linked to original sources

1997 flood tracking chart for the Red River of the North basin

The flood tracking chart for the Red River of the North Basin can be used by local citizens and emergency response personnel to determine the latest river stage. By comparing the current stage (water-surface elevation above some datum) and predicted flood crest to the recorded peak stages of previous floods, emergency response personnel and residents can make informed decisions concerning the threat to life and property. The flood tracking chart shows a map of the basin with the location of major real-time streamflow-gaging stations in the basin. Click on a station in the map or in the list below the map. Streamflow and stage information for the last 7 days, current stage relative to recorded peak stages, and streamflow for the previous 18 months are provided in graphic form, along with information such as station location and length of record. The National Weather Service has direct access to all information collected by the USGS for use in their forecasting models and routinely broadcasts the forecast information to the news media and on shortwave radio. The radio frequencies are 162.400 MHz (megahertz) in Petersburg, N. Dak., and Detroit Lakes, Minn.; 162.425 MHz in Webster, N. Dak., and Bemidji, Minn.; 162.450 MHz in Roosevelt, Minn.; 162.475 MHz in Grand Forks and Amenia, N. Dak.; and 162.550 MHz in Thief River Falls, Minn. To use the flood tracking chart for a particular property, determine the approximate elevation of the threatened property and the elevation of the gaging station that is closest to the threatened property. For example, most people in Grand Forks, N. Dak., probably will use the Red River of the North at Grand Forks station. Record the flood elevation for the gaging station. Compare the flood elevation to the elevation of the property to immediately know if the property has an impending threat of flooding. One must be cautioned by the fact that the surface of flowing water is not flat but has a slope. Therefore, the water-surface elevation near a threatened property might not be the same as the river stages at the gaging stations. The network of river-gaging stations in the Red River of the North Basin is operated by the USGS in cooperation with the U.S. Army Corps of Engineers, the North Dakota State Water Commission, the Minnesota Department of Natural Resources, the Southeast Cass Water Resources District, the Cass County Joint Water Resource District, the Red River Joint Water Resource Board, and the Red River Watershed Management Board. For more information about USGS programs in North Dakota, contact the District Chief, U.S. Geological Survey, North Dakota District, at (701) 250-7400.

Open-File Report↗

Assessing environmental contaminant threats to lands and biota managed by the U.S. Fish and Wildlife Service

The Contaminant Assessment Process (CAP) is a standardized approach for documenting and assessing threats posed by environmental contaminants to lands and biota managed by the Department of the Interior (DOI). The Biomonitoring of Environmental Status and Trends (BEST) Program of the U.S. Geological Survey Biological Resources Division (USGS/BRD) developed the CAP cooperatively with the U.S. Fish and Wildlife Service's (FWS) Division of Environmental Contaminants (DEC). The CAP involves two parts, a retrospective analysis, and if needed, field-sampling. The retrospective analysis documents the ecological characteristics, management goals, areas potentially vulnerable to hazardous substance spills, and habitats of importance for the DOI land unit of interest. In addition, contaminant transport pathways and sources (point and nonpoint) are identified and potentially contaminated areas delineated. The second part of the CAP involves developing field-sampling plans to confirm the presence or effects of contaminants identified in the retrospective analysis. Field-sampling deemed necessary to confirm contaminant issues on national wildlife refuges identified through the retrospective analyses of CAP is handled as part of DECs on- and off-refuge investigation programs. By gathering and interpreting information, the CAP generates valuable insight regarding contaminant issues that may be affecting refuges. Findings from the CAP can help FWS stewards select options that reduce contaminant impacts on the habitats and species that they manage. Information synthesized through the CAP also contributes to the development of Comprehensive Conservation Plans mandated through the National Wildlife Refuge System Improvement Act of 1997. To insure that this information has the maximum benefit to the agency, DEC and the BEST Program jointly developed a data management system to support the CAP. This system facilitates information acquisition from remote sources and serves as a permanent data repository. Thus, the system documents CAP findings, enhances FWS's institutional memory, and supports informed management decisions. This document is a user's guide, intended for use by FWS field biologists responsible for applying the retrospective analysis portion of the CAP to FWS national wildlife refuge lands and provides instructions for entering information into the data management system. This is the third revision of the original document written in 1993 by scientists of the Idaho National Engineering and Environmental Laboratory.

Open-File Report↗

Public outreach and communications of the Alaska Volcano Observatory during the 2005-2006 eruption of Augustine Volcano: Chapter 27 in The 2006 eruption of Augustine Volcano, Alaska

The 2005-6 eruption of Augustine Volcano in the Cook Inlet region, Alaska, greatly increased public desire for volcano hazard information, as this eruption was the most significant in Cook Inlet since 1992. In response to this heightened concern, the Alaska Volcano Observatory (AVO) increased ongoing efforts to deliver specific eruption-focused information to communities nearest to the volcano, created a public communications strategy to assist staff with managing requests, and used the recently upgraded AVO Web site as a primary information-delivery path. During the eruption, AVO responded to a minimum of ~1,700 individual requests for information from the media, the public, and other organizations with responsibilities associated with volcanic activity in Alaska; requests were received both as phone calls to the observatory and e-mail stemming from the AVO Web site. Staff also delivered approximately two dozen Augustine-specific presentations and gave nearly three dozen tours of the AVO Anchorage Operations Center in Anchorage. This intensity of public interaction was markedly higher than during noneruptive periods. During the Augustine unrest and eruption, AVO also refined its internal communication procedures, instituted and maintained up-to-date and concise talking points concerning the most recent and relevant volcanic activity and hazards, and created a media management plan to assist staff in working with members of the media. These items aided staff in maintaining a consistent message concerning the eruption, potential hazards, and our response activities. The AVO Web site, with its accompanying database, is the backbone of AVO's external and internal communications. This was the first Cook Inlet volcanic eruption with a public expectation of real-time access to data, updates, and hazards information over the Internet. In March 2005, AVO improved the Web site from individual static pages to a dynamic, database-driven site. This new system provided quick and straightforward access to the latest information for (1) staff within the observatory, (2) emergency managers from State and local governments and organizations, (3) the media, and (4) the public. From mid-December 2005 through April 2006, the AVO Web site served more than 45 million Web pages and about 5.5 terabytes of data.

Alaska↗

Flood-inundation maps for the Leaf River at Hattiesburg, Mississippi

Digital flood-inundation maps for a 1.7-mile reach of the Leaf River were developed by the U.S. Geological Survey (USGS) in cooperation with the City of Hattiesburg, City of Petal, Forrest County, Mississippi Emergency Management Agency, Mississippi Department of Homeland Security, and the Emergency Management District. The Leaf River study reach extends from just upstream of the U.S. Highway 11 crossing to just downstream of East Hardy/South Main Street and separates the cities of Hattiesburg and Petal, Mississippi. The inundation maps, which can be accessed through the USGS Flood Inundation Mapping Science Web site at http://water.usgs.gov/osw/flood_inundation/ , depict estimates of the areal extent of flooding corresponding to selected water-surface elevations (stages) at the USGS streamgage at Leaf River at Hattiesburg, Mississippi (02473000). Current conditions at the USGS streamgage may be obtained through the National Water Information System Web site at http://waterdata.usgs.gov/ms/nwis/uv/?site_no=02473000&PARAmeter_cd=00065,00060 . In addition, the information has been provided to the National Weather Service (NWS) for incorporation into their Advanced Hydrologic Prediction Service (AHPS) flood-warning system ( http://water.weather.gov/ahps/ ). The NWS forecasts flood hydrographs at many places that are often collocated at USGS streamgages. The forecasted peak-stage information, available on the AHPS Web site, may be used in conjunction with the maps developed in this study to show predicted areas of flood inundation. In this study, flood profiles were computed for the stream reach by means of a one-dimensional step-backwater model. The model was calibrated using the most current stage-discharge relations at the Leaf River at Hattiesburg, Mississippi, streamgage and documented high-water marks from recent and historical floods. The hydraulic model was then used to determine 13 water-surface profiles for flood stages at 1.0-foot intervals referenced to the streamgage datum and ranging from bankfull to approximately the highest recorded water-surface elevation at the streamgage. The simulated water-surface profiles were then combined with a geographic information system digital elevation model [derived from Light Detection and Ranging (LiDAR) data having a 0.6-foot vertical accuracy and 9.84-foot horizontal resolution] in order to delineate the area flooded at each 1-foot increment of stream stage. The availability of these maps, when combined with real-time stage information from USGS streamgages and forecasted stream stage from the NWS, provides emergency management personnel and residents with critical information during flood-response activities, such as evacuations and road closures, as well as for post-flood recovery efforts.

Mississippi↗

Flood-inundation maps for an 8.9-mile reach of the South Fork Little River at Hopkinsville, Kentucky

Digital flood-inundation maps for an 8.9-mile reach of South Fork Little River at Hopkinsville, Kentucky, were created by the U.S. Geological Survey (USGS) in cooperation with the City of Hopkinsville Community Development Services. The inundation maps, which can be accessed through the USGS Flood Inundation Mapping Science Web site at http://water.usgs.gov/osw/flood_inundation/ depict estimates of the areal extent and depth of flooding corresponding to selected water levels (stages) at the USGS streamgage at South Fork Little River at Highway 68 By-Pass at Hopkinsville, Kentucky (station no. 03437495). Current conditions for the USGS streamgage may be obtained online at the USGS National Water Information System site ( http://waterdata.usgs.gov/nwis/inventory?agency_code=USGS&site_no=03437495 ). In addition, the information has been provided to the National Weather Service (NWS) for incorporation into their Advanced Hydrologic Prediction Service flood warning system ( http://water.weather.gov/ahps/ ). The NWS forecasts flood hydrographs at many places that are often co-located at USGS streamgages. The forecasted peak-stage information, also available on the Internet, may be used in conjunction with the maps developed in this study to show predicted areas of flood inundation. In this study, flood profiles were computed for the South Fork Little River reach by using HEC-RAS, a one-dimensional step-backwater model developed by the U.S. Army Corps of Engineers. The hydraulic model was calibrated by using the most current (2012) stage-discharge relation at the South Fork Little River at Highway 68 By-Pass at Hopkinsville, Kentucky, streamgage and measurements collected during recent flood events. The calibrated model was then used to calculate 13 water-surface profiles for a sequence of flood stages, most at 1-foot intervals, referenced to the streamgage datum and ranging from a stage near bank full to the estimated elevation of the 1.0-percent annual exceedance probability flood at the streamgage. To delineate the flooded area at each interval flood stage, the simulated water-surface profiles were combined with a Digital Elevation Model (DEM) of the study area by using Geographic Information System (GIS) software. The DEM consisted of bare-earth elevations within the study area and was derived from a Light Detection And Ranging (LiDAR) dataset having a 3.28-foot horizontal resolution. These flood-inundation maps, along with online information regarding current stages from USGS streamgage and forecasted stages from the NWS, provide emergency management and local residents with critical information for flood response activities such as evacuations, road closures, and post-flood recovery efforts.

Kentucky↗

Flood-inundation maps for the East Fork White River near Bedford, Indiana

Digital flood-inundation maps for an 1.8-mile reach of the East Fork White River near Bedford, Indiana (Ind.) were created by the U.S. Geological Survey (USGS) in cooperation with the Indiana Department of Transportation. The inundation maps, which can be accessed through the USGS Flood Inundation Mapping Science Web site at http://water.usgs.gov/osw/flood_inundation/ depict estimates of the areal extent and depth of flooding corresponding to selectedwater levels (stages) at USGS streamgage 03371500, East Fork White River near Bedford, Ind. Current conditions for estimating near-real-time areas of inundation using USGS streamgage information may be obtained on the Internet at http://waterdata.usgs.gov/in/nwis/uv?site_no=03371500. In addition, information has been provided to the National Weather Service (NWS) for incorporation into their Advanced Hydrologic Prediction Service (AHPS) flood warning system (http://water.weather.gov/ahps/). The NWS forecasts flood hydrographs at many places that are often colocated with USGS streamgages, including the East Fork White River near Bedford, Ind. NWS-forecasted peak-stage information may be used in conjunction with the maps developed in this study to show predicted areas of flood inundation. For this study, flood profiles were computed for the East Fork White River reach by means of a one-dimensional step-backwater model. The hydraulic model was calibrated by using the most current stage-discharge relations at USGS streamgage 03371500, East Fork White River near Bedford, Ind., and documented high-water marks from the flood of June 2008. The calibrated hydraulic model was then used to determine 20 water-surface profiles for flood stages at 1-foot intervals referenced to the streamgage datum and ranging from bankfull to the highest stage of the current stage-discharge rating curve. The simulated water-surface profiles were then combined with a geographic information system (GIS) digital elevation model (DEM, derived from Light Detection and Ranging (LiDAR) data having a 0.593-foot vertical accuracy) in order to delineate the area flooded at each water level. The availability of these maps, along with Internet information regarding current stage from the USGS streamgage near Bedford, Ind., and forecasted stream stages from the NWS, provides emergency management personnel and residents with information that is critical for flood response activities such as evacuations and road closures, as well as for postflood recovery eforts.

Indiana↗

Flood-inundation maps for a 6.5-mile reach of the Kentucky River at Frankfort, Kentucky

Digital flood-inundation maps for a 6.5-mile reach of Kentucky River at Frankfort, Kentucky, were created by the U.S. Geological Survey (USGS) in cooperation with the City of Frankfort Office of Emergency Management. The inundation maps, which can be accessed through the USGS Flood Inundation Mapping Science Web site at http://water.usgs.gov/osw/flood_inundation/, depict estimates of the areal extent and depth of flooding corresponding to selected water levels (stages) at the USGS streamgage Kentucky River at Lock 4 at Frankfort, Kentucky (station no. 03287500). Current conditions for the USGS streamgage may be obtained online at the USGS National Water Information System site (http://waterdata.usgs.gov/nwis/inventory?agency_code=USGS&site_no=03287500). In addition, the information has been provided to the National Weather Service (NWS) for incorporation into their Advanced Hydrologic Prediction Service (AHPS) flood warning system (http:/water.weather.gov/ahps/). The NWS forecasts flood hydrographs at many places that are often colocated at USGS streamgages. The forecasted peak-stage information, also available on the Internet, may be used in conjunction with the maps developed in this study to show predicted areas of flood inundation. In this study, flood profiles were computed for the Kentucky River reach by using HEC–RAS, a one-dimensional step-backwater model developed by the U.S. Army Corps of Engineers. The hydraulic model was calibrated by using the most current (2013) stage-discharge relation for the Kentucky River at Lock 4 at Frankfort, Kentucky, in combination with streamgage and high-water-mark measurements collected for a flood event in May 2010. The calibrated model was then used to calculate 26 water-surface profiles for a sequence of flood stages, at 1-foot intervals, referenced to the streamgage datum and ranging from a stage near bankfull to the elevation that breached the levees protecting the City of Frankfort. To delineate the flooded area at each interval flood stage, the simulated water-surface profiles were combined with a digital elevation model (DEM) of the study area by using geographic information system software. The DEM consisted of bare-earth elevations within the study area and was derived from a Light Detection And Ranging (LiDAR) dataset having a 5.0-foot horizontal resolution and an accuracy of 0.229 foot. The availability of these maps, along with Internet information regarding current stages from USGS streamgages and forecasted stages from the NWS, provides emergency management personnel and local residents with critical information for flood response activities such as evacuations, road closures, and postflood recovery efforts.

Kentucky↗

Flood inundation maps for the Wabash and Eel Rivers at Logansport, Indiana

Digital flood-inundation maps for an 8.3-mile reach of the Wabash River and a 7.6-mile reach of the Eel River at Logansport, Indiana (Ind.), were created by the U.S. Geological Survey (USGS) in cooperation with the Indiana Office of Community and Rural Affairs. The inundation maps, which can be accessed through the USGS Flood Inundation Mapping Science Web site at http://water.usgs.gov/osw/flood_inundation/ , depict estimates of the areal extent and depth of flooding corresponding to selected water levels (stages) at USGS streamgage Wabash River at Logansport, Ind. (sta. no. 03329000) and USGS streamgage Eel River near Logansport, Ind. (sta. no. 03328500). Current conditions for estimating near-real-time areas of inundation using USGS streamgage information may be obtained on the Internet at http://waterdata.usgs.gov/ . In addition, information has been provided to the National Weather Service (NWS) for incorporation into their Advanced Hydrologic Prediction Service (AHPS) flood warning system http:/water.weather.gov/ahps/ ). The NWS forecasts flood hydrographs at many places that are often colocated with USGS streamgages. NWS-forecasted peak-stage information may be used in conjunction with the maps developed in this study to show predicted areas of flood inundation. For this study, flood profiles were computed for the stream reaches by means of a one-dimensional step-backwater model developed by the U.S. Army Corps of Engineers. The hydraulic model was calibrated by using the most current stage-discharge relations at USGS streamgages 03329000, Wabash River at Logansport, Ind., and 03328500, Eel River near Logansport, Ind. The calibrated hydraulic model was then used to determine five water-surface profiles for flood stage at 1-foot intervals referenced to the Wabash River streamgage datum, and four water-surface profiles for flood stages at 1-foot intervals referenced to the Eel River streamgage datum. The stages range from bankfull to approximately the highest stages that have occurred since 1967 when three flood control dams were built upstream of Logansport, Ind. The simulated water-surface profiles were then combined with a geographic information system (GIS) digital elevation model (DEM, derived from Light Detection and Ranging [lidar] data having a 0.37-foot vertical accuracy and 3.9-foot horizontal resolution) in order to delineate the area flooded at each stage. The availability of these maps, along with information available on the Internet regarding current stages from the USGS streamgages at Logansport, Ind., and forecasted stream stages from the NWS, provides emergency management personnel and residents with information that is critical for flood response activities such as evacuations and road closures, as well as for post flood recovery efforts.

Indiana↗

An expanded model: flood-inundation maps for the Leaf River at Hattiesburg, Mississippi, 2013

Digital flood-inundation maps for a 6.8-mile reach of the Leaf River at Hattiesburg, Mississippi (Miss.), were created by the U.S. Geological Survey (USGS) in cooperation with the City of Hattiesburg, City of Petal, Forrest County, Mississippi Emergency Management Agency, Mississippi Department of Homeland Security, and the Emergency Management District. The inundation maps, which can be accessed through the USGS Flood Inundation Mapping Science Web site at http://water.usgs.gov/osw/flood_inundation/ , depict estimates of the areal extent and depth of flooding corresponding to selected water levels (stages) at the USGS streamgage at Leaf River at Hattiesburg, Miss. (station no. 02473000). Current conditions for estimating near-real-time areas of inundation by use of USGS streamgage information may be obtained on the Internet at http://waterdata.usgs.gov/ . In addition, the information has been provided to the National Weather Service (NWS) for incorporation into their Advanced Hydrologic Prediction Service (AHPS) flood warning system ( http://water.weather.gov/ahps/ ). The NWS forecasts flood hydrographs at many places that are often colocated with USGS streamgages. NWS-forecasted peak-stage information may be used in conjunction with the maps developed in this study to show predicted areas of flood inundation. In this study, flood profiles were computed for the stream reach by means of a one-dimensional step-backwater model. The model was calibrated by using the most current stage-discharge relations at the Leaf River at Hattiesburg, Miss. streamgage (02473000) and documented high-water marks from recent and historical floods. The hydraulic model was then used to determine 13 water-surface profiles for flood stages at 1.0-foot intervals referenced to the streamgage datum and ranging from bankfull to approximately the highest recorded water level at the streamgage. The simulated water-surface profiles were then combined with a geographic information system (GIS) digital elevation model (DEM, derived from light detection and ranging (lidar) data having a 0.6-foot vertical and 9.84-foot horizontal resolution) in order to delineate the area flooded at each water level. Development of the estimated flood inundation maps as described in this report update previously published inundation estimates by including reaches of the Bouie and Leaf Rivers above their confluence. The availability of these maps along with Internet information regarding current stage from USGS streamgages and forecasted stream stages from the NWS provide emergency management personnel and residents with information that is critical for flood response activities such as evacuations and road closures as well as for post flood recovery efforts.

Mississippi↗

Metal prices in the United States through 2010

This report, which updates and revises the U.S. Geological Survey (USGS) (1999) publication, “Metal Prices in the United States Through 1998,” presents an extended price history for a wide range of metals available in a single document. Such information can be useful for the analysis of mineral commodity issues, as well as for other purposes. The chapter for each mineral commodity includes a graph of annual current and constant dollar prices for 1970 through 2010, where available; a list of significant events that affected prices; a brief discussion of the metal and its history; and one or more tables that list current dollar prices. In some cases, the metal prices presented herein are for some alternative form of an element or, instead of a price, a value, such as the value for an import as appraised by the U.S. Customs Service. Also included are the prices for steel, steel scrap, and iron ore—steel because of its importance to the elements used to alloy with it, and steel scrap and iron ore because of their use in steelmaking. A few minor metals, such as calcium, potassium, sodium, strontium, and thorium, for which price histories were insufficient, were excluded. The annual prices given may be averages for the year, yearend prices, or some other price as appropriate for a particular commodity. Certain trade journals have been the source of much of this price information—American Metal Market, ICIS Chemical Business, Engineering and Mining Journal, Industrial Minerals, Metal Bulletin, Mining Journal, Platts Metals Week, Roskill Information Services Ltd. commodity reports, and Ryan’s Notes. Price information also is available in minerals information publications of the USGS (1880–1925, 1996–present) and the U.S. Bureau of Mines (1926–95), such as Mineral Commodity Summaries, Mineral Facts and Problems, Mineral Industry Surveys, and Minerals Yearbook. In addition to prices themselves, these journals and publications contain information relevant to prices, which has been helpful in the preparation of this publication. Prices in this report have been graphed in 1992 constant dollars to show the effects of inflation as measured by the U.S. Bureau of Labor Statistics Consumer Price Index for All Urban Consumers, a widely used measure of overall inflation in the United States. These prices are not tabulated, but a table of the deflators used is given in an appendix. Constant dollar prices can be used to show how prices that producers receive would have less purchasing power.

Scientific Investigations Report↗

Evaluation of the expected moments algorithm and a multiple low-outlier test for flood frequency analysis at streamgaging stations in Arizona

Flooding is among the costliest natural disasters in terms of loss of life and property in Arizona, which is why the accurate estimation of flood frequency and magnitude is crucial for proper structural design and accurate floodplain mapping. Current guidelines for flood frequency analysis in the United States are described in Bulletin 17B (B17B), yet since B17B’s publication in 1982 (Interagency Advisory Committee on Water Data, 1982), several improvements have been proposed as updates for future guidelines. Two proposed updates are the Expected Moments Algorithm (EMA) to accommodate historical and censored data, and a generalized multiple Grubbs-Beck (MGB) low-outlier test. The current guidelines use a standard Grubbs-Beck (GB) method to identify low outliers, changing the determination of the moment estimators because B17B uses a conditional probability adjustment to handle low outliers while EMA censors the low outliers. B17B and EMA estimates are identical if no historical information or censored or low outliers are present in the peak-flow data. EMA with MGB (EMA-MGB) test was compared to the standard B17B (B17B-GB) method for flood frequency analysis at 328 streamgaging stations in Arizona. The methods were compared using the relative percent difference (RPD) between annual exceedance probabilities (AEPs), goodness-of-fit assessments, random resampling procedures, and Monte Carlo simulations. The AEPs were calculated and compared using both station skew and weighted skew. Streamgaging stations were classified by U.S. Geological Survey (USGS) National Water Information System (NWIS) qualification codes, used to denote historical and censored peak-flow data, to better understand the effect that nonstandard flood information has on the flood frequency analysis for each method. Streamgaging stations were also grouped according to geographic flood regions and analyzed separately to better understand regional differences caused by physiography and climate. The B17B-GB and EMA-MGB RPD-boxplot results showed that the median RPDs across all streamgaging stations for the 10-, 1-, and 0.2-percent AEPs, computed using station skew, were approximately zero. As the AEP flow estimates decreased (that is, from 10 to 0.2 percent AEP) the variability in the RPDs increased, indicating that the AEP flow estimate was greater for EMA-MGB when compared to B17B-GB. There was only one RPD greater than 100 percent for the 10- and 1-percent AEP estimates, whereas 19 RPDs exceeded 100 percent for the 0.2-percent AEP. At streamgaging stations with low-outlier data, historical peak-flow data, or both, RPDs ranged from −84 to 262 percent for the 0.2-percent AEP flow estimate. When streamgaging stations were separated by the presence of historical peak-flow data (that is, no low outliers or censored peaks) or by low outlier peak-flow data (no historical data), the results showed that RPD variability was greatest for the 0.2-AEP flow estimates, indicating that the treatment of historical and (or) low-outlier data was different between methods and that method differences were most influential when estimating the less probable AEP flows (1, 0.5, and 0.2 percent). When regional skew information was weighted with the station skew, B17B-GB estimates were generally higher than the EMA-MGB estimates for any given AEP. This was related to the different regional skews and mean square error used in the weighting procedure for each flood frequency analysis. The B17B-GB weighted skew analysis used a more positive regional skew determined in USGS Water Supply Paper 2433 (Thomas and others, 1997), while the EMA-MGB analysis used a more negative regional skew with a lower mean square error determined from a Bayesian generalized least squares analysis. Regional groupings of streamgaging stations reflected differences in physiographic and climatic characteristics. Potentially influential low flows (PILFs) were more prevalent in arid regions of the State, and generally AEP flows were larger with EMA-MGB than with B17B-GB for gaging stations with PILFs. In most cases EMA-MGB curves would fit the largest floods more accurately than B17B-GB. In areas of the State with more baseflow, such as along the Mogollon Rim and the White Mountains, streamgaging stations generally had fewer PILFs and more positive skews, causing estimated AEP flows to be larger with B17B-GB than with EMA-MGB. The effect of including regional skew was similar for all regions, and the observed pattern was increasingly greater B17B-GB flows (more negative RPDs) with each decreasing AEP quantile. A variation on a goodness-of-fit test statistic was used to describe each method’s ability to fit the largest floods. The mean absolute percent difference between the measured peak flows and the log-Pearson Type 3 (LP3)-estimated flows, for each method, was averaged over the 90th, 75th, and 50th percentiles of peak-flow data at each site. In most percentile subsets, EMA-MGB on average had smaller differences (1 to 3 percent) between the observed and fitted value, suggesting that the EMA-MGB-LP3 distribution is fitting the observed peak-flow data more precisely than B17B-GB. The smallest EMA-MGB percent differences occurred for the greatest 10 percent (90th percentile) of the peak-flow data. When stations were analyzed by USGS NWIS peak flow qualification code groups, the stations with historical peak flows and no low outliers had average percent differences as high as 11 percent greater for B17B-GB, indicating that EMA-MGB utilized the historical information to fit the largest observed floods more accurately. A resampling procedure was used in which 1,000 random subsamples were drawn, each comprising one-half of the observed data. An LP3 distribution was fit to each subsample using B17B-GB and EMA-MGB methods, and the predicted 1-percent AEP flows were compared to those generated from distributions fit to the entire dataset. With station skew, the two methods were similar in the median percent difference, but with weighted skew EMA-MGB estimates were generally better. At two gages where B17B-GB appeared to perform better, a large number of peak flows were deemed to be PILFs by the MGB test, although they did not appear to depart significantly from the trend of the data (step or dogleg appearance). At two gages where EMA-MGB performed better, the MGB identified several PILFs that were affecting the fitted distribution of the B17B-GB method. Monte Carlo simulations were run for the LP3 distribution using different skews and with different assumptions about the expected number of historical peaks. The primary benefit of running Monte Carlo simulations is that the underlying distribution statistics are known, meaning that the true 1-percent AEP is known. The results showed that EMA-MGB performed as well or better in situations where the LP3 distribution had a zero or positive skew and historical information. When the skew for the LP3 distribution was negative, EMA-MGB performed significantly better than B17B-GB and EMA-MGB estimates were less biased by more closely estimating the true 1-percent AEP for 1, 2, and 10 historical flood scenarios.

Arizona↗

Flood-inundation maps for the North Branch Elkhart River at Cosperville, Indiana

Digital flood-inundation maps for a reach of the North Branch Elkhart River at Cosperville, Indiana (Ind.), were created by the U.S. Geological Survey (USGS) in cooperation with the U.S. Army Corps of Engineers, Detroit District. The inundation maps, which can be accessed through the USGS Flood Inundation Mapping Science Web site at http://water.usgs.gov/osw/flood_inundation/ depict estimates of the areal extent and depth of flooding corresponding to selected water levels (stages) at USGS streamgage 04100222, North Branch Elkhart River at Cosperville, Ind. Current conditions for estimating near-real-time areas of inundation using USGS streamgage information may be obtained on the Internet at http://waterdata.usgs.gov/in/nwis/uv?site_no=04100222 . In addition, information has been provided to the National Weather Service (NWS) for incorporation into their Advanced Hydrologic Prediction Service (AHPS) flood warning system ( http:/water.weather.gov/ahps/ ). The NWS AHPS forecasts flood hydrographs at many places that are often colocated with USGS streamgages, including the North Branch Elkhart River at Cosperville, Ind. NWS AHPS-forecast peak-stage information may be used in conjunction with the maps developed in this study to show predicted areas of flood inundation. For this study, flood profiles were computed for the North Branch Elkhart River reach by means of a one-dimensional step-backwater model. The hydraulic model was calibrated by using the most current stage-discharge relations at USGS streamgage 04100222, North Branch Elkhart River at Cosperville, Ind., and preliminary high-water marks from the flood of March 1982. The calibrated hydraulic model was then used to determine four water-surface profiles for flood stages at 1-foot intervals referenced to the streamgage datum and ranging from bankfull to the highest stage of the current stage-discharge rating curve. The simulated water-surface profiles were then combined with a geographic information system (GIS) digital elevation model (DEM, derived from Light Detection and Ranging [LiDAR]) in order to delineate the area flooded at each water level. The availability of these maps, along with Internet information regarding current stage from the USGS streamgage 04100222, North Branch Elkhart River at Cosperville, Ind., and forecast stream stages from the NWS AHPS, provides emergency management personnel and residents with information that is critical for flood response activities such as evacuations and road closures, as well as for post-flood recovery efforts.

Indiana↗

Flood-inundation map library for the Licking River and South Fork Licking River near Falmouth, Kentucky

Digital flood inundation maps for a 17-mile reach of Licking River and 4-mile reach of South Fork Licking River near Falmouth, Kentucky, were created by the U.S. Geological Survey (USGS) in cooperation with Pendleton County and the U.S. Army Corps of Engineers–Louisville District. The inundation maps, which can be accessed through the USGS Flood Inundation Mapping Science Web site at http://wim.usgs.gov/FIMI/FloodInundationMapper.html , depict estimates of the areal extent and depth of flooding corresponding to selected water levels (stages) at the USGS streamgage on the Licking River at Catawba, Ky., (station 03253500) and the USGS streamgage on the South Fork Licking River at Hayes, Ky., (station 03253000). Current conditions (2015) for the USGS streamgages may be obtained online at the USGS National Water Information System site ( http://waterdata.usgs.gov/nwis ). In addition, the streamgage information has been provided to the National Weather Service (NWS) for incorporation into their Advanced Hydrologic Prediction Service (AHPS) flood warning system ( http:/water.weather.gov/ahps/ ). The flood hydrograph forecasts provided by the NWS are usually collocated with USGS streamgages. The forecasted peak-stage information, also available on the NWS Web site, may be used in conjunction with the maps developed in this study to show predicted areas of flood inundation. In this study, flood profiles were computed for the Licking River reach and South Fork Licking River reach by using a one-dimensional step-backwater model. The hydraulic model was calibrated by using the most current (2015) stage-discharge relations for the Licking River at Catawba, Ky., and the South Fork Licking River at Hayes, Ky., USGS streamgages. The calibrated model was then used to calculate 60 water-surface profiles for a sequence of flood stages, at 2-foot intervals, referenced to the streamgage datum and ranging from an elevation near bankfull to the elevation associated with a major flood that occurred in the region in 1997. To delineate the flooded area at each interval flood stage, the simulated water-surface profiles were combined with a digital elevation model of the study area by using geographic information system software. The availability of these flood inundation maps for Falmouth, Ky., along with online information regarding current stages from the USGS streamgages and forecasted stages from the NWS, provides emergency management personnel and local residents with information that is critical for flood response activities such as evacuations, road closures, and post-flood recovery efforts.

Kentucky↗

Flood-inundation maps for the Yellow River at Plymouth, Indiana

Digital flood-inundation maps for a 4.9-mile reach of the Yellow River at Plymouth, Indiana (Ind.), were created by the U.S. Geological Survey (USGS) in cooperation with the Indiana Office of Community and Rural Affairs. The flood-inundation maps, which can be accessed through the USGS Flood Inundation Mapping Science Web site at http://water.usgs.gov/osw/flood_inundation/ , depict estimates of the areal extent and depth of flooding corresponding to selected water levels (stages) at the USGS streamgage 05516500, Yellow River at Plymouth, Ind. Current conditions for estimating near-real-time areas of inundation using USGS streamgage information may be obtained on the Internet at http://waterdata.usgs.gov/in/nwis/uv?site_no=05516500 . In addition, information has been provided to the National Weather Service (NWS) for incorporation into their Advanced Hydrologic Prediction Service (AHPS) flood-warning system ( http:/water.weather.gov/ahps/ ). The NWS AHPS forecasts flood hydrographs at many sites that are often collocated with USGS streamgages, including the Yellow River at Plymouth, Ind. NWS AHPS-forecast peak-stage information may be used in conjunction with the maps developed in this study to show predicted areas of flood and forecasts of flood hydrographs at this site. For this study, flood profiles were computed for the Yellow River reach by means of a one-dimensional step-backwater model. The hydraulic model was calibrated by using the current stage-discharge relations at the Yellow River streamgage, in combination with the flood-insurance study for Marshall County (issued in 2011). The calibrated hydraulic model was then used to determine eight water-surface profiles for flood stages at 1-foot intervals referenced to the streamgage datum and ranging from bankfull to the highest stage of the current stage-discharge rating curve. The 1-percent annual exceedance probability flood profile elevation (flood elevation with recurrence intervals within 100 years) is within the calibrated water-surface elevations for comparison. The simulated water-surface profiles were then used with a geographic information system (GIS) digital elevation model (DEM, derived from Light Detection and Ranging [lidar]) in order to delineate the area flooded at each water level. The availability of these maps, along with Internet information regarding current stage from the USGS streamgage 05516500, Yellow River at Plymouth, Ind., and forecast stream stages from the NWS AHPS, provides emergency management personnel and residents with information that is critical for flood response activities such as evacuations and road closures, as well as for postflood recovery efforts.

Indiana↗

Flood-inundation maps for the Wabash River at Lafayette, Indiana

Digital flood-inundation maps for an approximately 4.8-mile reach of the Wabash River at Lafayette, Indiana (Ind.) were created by the U.S. Geological Survey (USGS) in cooperation with the Indiana Office of Community and Rural Affairs. The inundation maps, which can be accessed through the USGS Flood Inundation Mapping Science web site at https://water.usgs.gov/osw/flood_inundation/ , depict estimates of the areal extent and depth of flooding corresponding to selected water levels (stages) at USGS streamgage 03335500, Wabash River at Lafayette, Ind. Current streamflow conditions for estimating near-real-time areas of inundation using USGS streamgage information may be obtained on the internet at https://waterdata.usgs.gov/in/nwis/uv?site_no=03335500 . In addition, information has been provided to the National Weather Service (NWS) for incorporation into their Advanced Hydrologic Prediction Service (AHPS) flood-warning system ( https://water.weather.gov/ahps/ ). The NWS AHPS forecasts flood hydrographs at many places that are often colocated with USGS streamgages, including the Wabash River at Lafayette, Ind. NWS AHPS-forecast peak-stage information may be used with the maps developed in this study to show predicted areas of flood inundation. For this study, flood profiles were computed for the Wabash River reach by means of a one-dimensional step-backwater model. The hydraulic model was calibrated by using the most current stage-discharge relations at USGS streamgage 03335500, Wabash River at Lafayette, Ind., and high-water marks from the flood of July 2003 (U.S. Army Corps of Engineers [USACE], 2007). The calibrated hydraulic model was then used to determine 23 water-surface profiles for flood stages at 1-foot intervals referenced to the streamgage datum and ranging from bankfull to the highest stage of the current stage-discharge rating curve. The simulated water-surface profiles were then combined with a geographic information system digital elevation model derived from light detection and ranging to delineate the area flooded at each water level. The availability of these maps, along with internet information regarding current stage from the USGS streamgage 03335500, Wabash River at Lafayette, Ind., and forecasted high-flow stages from the NWS AHPS, will provide emergency management personnel and residents with information that is critical for flood-response activities such as evacuations and road closures, and for postflood recovery efforts.

Indiana↗

Comparison of U.S. Geological Survey and Bureau of Reclamation water-use reporting in the Colorado River Basin

The use of water in the United States is arguably one of the most important factors determining water availability at any specific place and time. Numerous local, State, and Federal entities develop, compile, and report water-use data, which can lead to confusing or conflicting information. This report was authored jointly by the U.S. Geological Survey (USGS) and Bureau of Reclamation (Reclamation) to compare and contrast the two agencies’ water-use information programs in the Colorado River Basin. The report also describes the legal drivers for each program, clarifies confusing terminology, compares the methods used, and contrasts the information reported by each agency. This detailed comparison demonstrates that these two Federal agencies have different missions, different programmatic drivers, and different user communities, all of which lead to different approaches to water-use data collection, analysis, and reporting. This report highlights those differences and explains why the USGS and Reclamation programs exist and how the data serve different user communities. Even though the two water-use programs are different by design and purpose, the program comparison presented in this report has identified opportunities for closer coordination and sharing of information between the USGS and Reclamation, as well as program components where agency collaboration can improve water-use estimate methodologies. This comparison effort emphasizes that it is incumbent upon each agency to clearly define the meaning of the terms used and the appropriate application of the reported information to avoid confusion or the accidental misuse of the information. An additional benefit of this comparison effort is the formation of a joint USGS/Reclamation water-use team that will continue to investigate opportunities to expand and coordinate future water-use data compilation and reporting.

Arizona, Colorado, New Mexico, Utah, Wyoming↗

Techniques for estimating the magnitude and frequency of peak flows on small streams in the binational U.S. and Canadian Lake of the Woods–Rainy River Basin upstream from Kenora, Ontario, Canada, based on data through water year 2013

A binational study was initiated to update statistical equations that are used to estimate the magnitude and frequency of peak flows on streams in Manitoba and Ontario, Canada, and Minnesota that are contained within the binational Lake of the Woods–Rainy River Basin upstream from Kenora, Ontario, Canada. Hydraulic engineers use peak streamflow data to inform designs of bridges, culverts, and dams, and water managers use peak streamflow data to inform regulation and planning activities. However, long-term streamflow measurements are available at few locations along the more than 20,000 miles of stream/ditch networks within the binational Lake of the Woods–Rainy River Basin upstream from Kenora, Ontario, Canada. Estimates of peak-flow magnitudes for 66.7-, 50-, 20-, 10-, 4-, 2-, 1-, and 0.2-percent annual exceedance probabilities equivalent to annual flood-frequency recurrence intervals of 1.5-, 2-, 5-, 10-, 25-, 50-, 100-, and 500-year recurrence intervals, respectively, are presented for 49 streamgages in Minnesota and adjacent areas in the Province of Ontario, Canada, based on data collected through water year 2013. Peak-flow frequency information was subsequently used in regression analyses to develop equations relating peak flows for selected recurrence intervals to various basin and climatic characteristics. The study area includes 49 streamgages located in the binational Lake of the Woods–Rainy River Basin upstream from Kenora, Ontario, Canada, and is represented by southern portions of the Canadian Provinces of Manitoba (2 percent) and Ontario (56 percent) and the northern portion of the U.S. State of Minnesota (42 percent). The study area was represented by three regions that were defined in previous studies in the U.S. State of Minnesota and another in the Canadian Province of Ontario. The two Minnesota regions A and B were developed using a multiple regression method and hydrologic landscape units were used to validate regions in Minnesota. The Ontario region A was developed using a multiple regression method and standardized residuals from the 100-year recurrence intervals. Canadian maximum instantaneous peak-flow data were converted from a calendar year to a water year (October 1 to September 30) and where the annual maximum instantaneous peak-flow value was not available in HYDAT, the Sangal method was applied to known average daily flow values to estimate an annual maximum instantaneous peak-flow value. Geographic information system software was used to calculate eight characteristics investigated as potential explanatory variables in the regression analyses. The procedure for estimating peak-flow frequency for selected exceedance probabilities for a specific ungaged site depends on whether the site is near a streamgage on the same stream or is on an ungaged stream. For an ungaged site near a streamgage on the same stream, the drainage-area ratio method can be used. For an ungaged site on an ungaged stream, the regional regression equations developed for this study should be used. All equations presented in this study will be incorporated into StreamStats, a web-based geographic information system tool developed by the U.S. Geological Survey. StreamStats allows users to obtain streamflow statistics, basin characteristics, and other information for user-selected locations on streams through an interactive map.

Manitoba, Minnesota, Ontario↗

Flood-inundation maps for Fourmile Creek at Silver Grove, Kentucky

Digital flood-inundation maps for a 3.4-mile reach of Fourmile Creek at Silver Grove, Kentucky, were created by the U.S. Geological Survey (USGS) in cooperation with the City of Silver Grove and the U.S. Army Corps of Engineers Louisville District. Because the City of Silver Grove is subject to flooding from Fourmile Creek and the Ohio River (backwater flooding up Fourmile Creek), a set of flood-inundation maps was created, including maps for each flooding source considered independently and for possible scenarios involving flooding from both sources combined. The flood-inundation maps depict estimates of the areal extent and depth of flooding corresponding to a range of gage heights (gage height is commonly referred to as “stage,” or the water-surface elevation at a streamgage) at the USGS streamgage on Fourmile Creek at Grays Crossing at Silver Grove, Ky. (station number 03238785), and the USGS streamgage on Fourmile Creek at Highway 8 at Silver Grove, Ky. (station number 03238798). Near-real-time stages at these streamgages can be obtained from the USGS National Water Information System at https://waterdata.usgs.gov/ . The USGS streamgage on the Ohio River at Cincinnati, Ohio (station number 03255000), is also important in this study because the National Weather Service (NWS) Advanced Hydrologic Prediction Service (AHPS; https://water.weather.gov/ahps/ ) forecasts flood hydrographs for this site (NWS AHPS site CCNO1). The peak-stage information forecast by the NWS AHPS can be used in conjunction with the maps developed in this study to show predicted areas of flood inundation. Flood profiles were computed for the Fourmile Creek study reach by means of a one-dimensional, step-backwater hydraulic model (HEC-RAS) developed by the U.S. Army Corps of Engineers. The hydraulic model was calibrated by using the current stage-discharge relation (USGS rating number 1.1) at USGS streamgage 03238785, Fourmile Creek at Grays Crossing at Silver Grove, Ky. The model was then used to compute water-surface profiles for 83 combinations of flood stages on the Ohio River and Fourmile Creek ranging from approximately base flow to greater than a 2-percent annual exceedance probability flood in the model reach. An additional 50 water-surface profiles were computed for backwater-only flooding (from the Ohio River) for flood elevations (referenced to the North American Vertical Datum of 1988 [NAVD 88]) at 1-foot intervals referenced to USGS streamgage 03238798, Fourmile Creek at Highway 8 at Silver Grove, Ky.; these elevations ranged from approximately normal pool (460 ft, NAVD 88) to approximately a 0.2-percent annual exceedance probability flood (509 ft, NAVD 88) on the Ohio River. The computed water-surface profile information was then combined with a digital elevation model derived from light detection and ranging (lidar) data to delineate the approximate flooded areas. The digital flood-inundation maps are available through the USGS Flood Inundation Mapper application ( https://fim.wim.usgs.gov/fim/ ), which presents map libraries and provides detailed information on flood extent and depths for selected sites. The flood-inundation maps developed in this study, in conjunction with the real-time stage data from the USGS streamgages on Fourmile Creek at Silver Grove, Ky., and forecasted stream stages from the NWS AHPS, are intended to provide information that can help inform the public about potential flooding and provide emergency management personnel with a tool to efficiently manage emergency flood operations, such as evacuations and road closures, and assist in postflood recovery efforts.

Kentucky↗