Geology Reports⌕ Search

USGS · ofr99108

Assessing environmental contaminant threats to lands and biota managed by the U.S. Fish and Wildlife Service

Abstract

The Contaminant Assessment Process (CAP) is a standardized approach for documenting and assessing threats posed by environmental contaminants to lands and biota managed by the Department of the Interior (DOI). The Biomonitoring of Environmental Status and Trends (BEST) Program of the U.S. Geological Survey Biological Resources Division (USGS/BRD) developed the CAP cooperatively with the U.S. Fish and Wildlife Service's (FWS) Division of Environmental Contaminants (DEC). The CAP involves two parts, a retrospective analysis, and if needed, field-sampling. The retrospective analysis documents the ecological characteristics, management goals, areas potentially vulnerable to hazardous substance spills, and habitats of importance for the DOI land unit of interest. In addition, contaminant transport pathways and sources (point and nonpoint) are identified and potentially contaminated areas delineated. The second part of the CAP involves developing field-sampling plans to confirm the presence or effects of contaminants identified in the retrospective analysis. Field-sampling deemed necessary to confirm contaminant issues on national wildlife refuges identified through the retrospective analyses of CAP is handled as part of DECs on- and off-refuge investigation programs. By gathering and interpreting information, the CAP generates valuable insight regarding contaminant issues that may be affecting refuges. Findings from the CAP can help FWS stewards select options that reduce contaminant impacts on the habitats and species that they manage. Information synthesized through the CAP also contributes to the development of Comprehensive Conservation Plans mandated through the National Wildlife Refuge System Improvement Act of 1997. To insure that this information has the maximum benefit to the agency, DEC and the BEST Program jointly developed a data management system to support the CAP. This system facilitates information acquisition from remote sources and serves as a permanent data repository. Thus, the system documents CAP findings, enhances FWS's institutional memory, and supports informed management decisions. This document is a user's guide, intended for use by FWS field biologists responsible for applying the retrospective analysis portion of the CAP to FWS national wildlife refuge lands and provides instructions for entering information into the data management system. This is the third revision of the original document written in 1993 by scientists of the Idaho National Engineering and Environmental Laboratory.

Explore related subjects

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

James Coyle, Craig Moore, R. Sky Bristol, Mary G. Henry, Tim Hall, Tim Kubiak. 1999. Assessing environmental contaminant threats to lands and biota managed by the U.S. Fish and Wildlife Service. https://doi.org/10.3133/ofr99108

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related USGS reports

ECCOE Landsat quarterly calibration and validation report—Quarter 2, 2026

Executive Summary The U.S. Geological Survey Earth Resources Observation and Science Calibration and Validation (Cal/Val) Center of Excellence (ECCOE) focuses on improving the accuracy, precision, calibration, and product quality of remote-sensing data, leveraging years of multiscale optical system geometric and radiometric calibration and characterization experience. The ECCOE Landsat Cal/Val Team continually monitors the geometric and radiometric performance of active Landsat missions and makes calibration adjustments, as needed, to maintain data quality at the highest level. This report provides observed geometric and radiometric analysis results for Landsats 8 and 9 for quarter 2 (April–June), 2026. All data used to compile the Cal/Val analysis results presented in this report are freely available from the U.S. Geological Survey EarthExplorer website: https://earthexplorer.usgs.gov.

Open-File Report↗

ECCOE Landsat quarterly calibration and validation report—Quarter 1, 2026

Executive Summary The U.S. Geological Survey Earth Resources Observation and Science Calibration and Validation (Cal/Val) Center of Excellence (ECCOE) focuses on improving the accuracy, precision, calibration, and product quality of remote-sensing data, leveraging years of multiscale optical system geometric and radiometric calibration and characterization experience. The ECCOE Landsat Cal/Val Team continually monitors the geometric and radiometric performance of active Landsat missions and makes calibration adjustments, as needed, to maintain data quality at the highest level. This report provides observed geometric and radiometric analysis results for Landsats 8 and 9 for quarter 1 (January–March) of 2026. All data used to compile the Cal/Val analysis results presented in this report are freely available from the U.S. Geological Survey EarthExplorer website: https://earthexplorer.usgs.gov . One specific activity that the ECCOE Landsat Cal/Val Team closely monitored was a Landsat 8 Thermal Infrared Sensor encoder alerts anomaly. On March 18, 2026, the Thermal Infrared Sensor instrument’s mechanism control electronics board reset, driving several parameters to default power-on values. Subsequent telemetry and analysis determined that no persistent hardware misconfiguration was present and no radiometric or geometric degradation was observed.

Open-File Report↗

Floods of June 20–July 6, 2024, in the Big Sioux River, Rock River, Little Sioux River, Ocheyedan River, and Floyd River Basins, northwestern Iowa

Major flooding occurred on June 20–July 6, 2024, in northwestern Iowa affecting the Big Sioux, Rock, Little Sioux, Ocheyedan, and Floyd River Basins. Heavy rain fell in northwestern Iowa, southwestern Minnesota, and southeastern South Dakota on June 20–22, 2024. Parts of northwestern Iowa recorded 2–6 inches of rainfall and localized amounts exceeding 12 inches. A maximum peak-of-record streamflow of 175,000 cubic feet per second at the U.S. Geological Survey streamgage Big Sioux River at Akron, Iowa (06485500), was recorded on June 22, 2024, and had an annual exceedance probability range of 0.2–0.49 percent. High-water marks were measured at four locations along the Big Sioux River between U.S. Interstate 29 at Sioux City, Iowa, upstream to Iowa Highway 10 north of Hawarden, Iowa, a distance of 75.7 river miles. A maximum peak-of-record streamflow of 157,000 cubic feet per second at the U.S. Geological Survey streamgage Rock River near Rock Valley, Iowa (06483500), was recorded on June 22, 2024, and had an annual exceedance probability of less than 0.2 percent. High-water marks were measured at eight locations along the Rock River between County Road B30 east of Hudson, South Dakota, upstream to Iowa Highway 9 at Rock Rapids, Iowa, a distance of 39.3 river miles. A maximum peak-of-record streamflow of 63,000 cubic feet per second at the U.S. Geological Survey streamgage Little Sioux River at Correctionville, Iowa (06606600), was recorded on June 24, 2024, and had an annual exceedance probability range of 0.2–0.49 percent. High-water marks were measured at 11 locations along the Little Sioux River between Iowa Highway 31 west of Correctionville, Iowa, upstream to U.S. Highway 18 north of Spencer, Iowa, a distance of 134.8 river miles. A maximum streamflow of 24,500 cubic feet per second at the U.S. Geological Survey streamgage Ocheyedan River near Spencer, Iowa (06605000), was recorded on June 22, 2024, and had an annual exceedance probability range of 0.2–0.49 percent. High-water marks were measured at three locations along the Ocheyedan River between County Road M38 west of Spencer, Iowa, upstream to U.S. Highway 18 west of Everly, Iowa, a distance of 12.8 river miles. A maximum streamflow of 41,000 cubic feet per second at the U.S. Geological Survey streamgage Floyd River at Alton, Iowa (06600100), was recorded on June 22, 2024, and had an annual exceedance probability range of 1–1.99 percent. High-water marks were measured at six locations along the Floyd River between Iowa Highway 3 at Le Mars, Iowa, upstream to Iowa Highway 10 at Alton, Iowa, a distance of 27.5 river miles. The high-water marks were used to develop flood profiles for the Big Sioux, Rock, Little Sioux, Ocheyedan, and Floyd Rivers.

Iowa, Minnesota, South Dakota↗