SEARCH · Geology Reports

Results for “Holocene”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,531 records · Page 85Linked to original sources

USGS2020

Improving paleoseismic earthquake magnitude estimates with rupture length information: Application to the Puget Lowland, Washington State, U.S.A.

Both earthquake displacement and rupture length correlate with magnitude, and therefore observations of each from past earthquakes can be used to estimate the magnitude of those earthquakes in the absence of instrumental records. We extend the Bayesian inversion method of Biasi and Weldon (2006), which estimates paleoearthquake magnitude from displacement observations, to incorporate both rupture length and surface displacement measurements into the magnitude inversion. We then use this method on 27 late Pleistocene to Holocene paleoearthquakes in the Puget Lowland region of Washington. Observations of (typically vertical) fault separation per event range from 0.6 to 7 m, implying net displacement per event of up to 10 ± 4 m for the largest event. Rupture lengths are estimated to vary between the smallest contiguous mapped scarps to the full extent of the faults mapped from geology and geophysical observations. Although a few of the ruptures may be longer than 150 km, the ruptures have a median of 53 km, indicating that earthquakes in the Puget Lowland have relatively high displacement to length ratios. By considering both datasets, we find that all events were between M 6.3 and 7.5, generally consistent with the expected seismicity from the USGS National Seismic Hazard Map for the region. The simultaneous use of both length and displacement data in the magnitude inversion decreases both the estimated earthquake magnitudes and the uncertainty. The magnitude reduction in particular is due to the relatively short rupture lengths possible for Puget Lowland faults. This implies a decrease in the seismic hazard (relative to a displacement-only assessment) to a highly populated and rapidly urbanizing region.

Washington↗

USGS2020

Site response, basin amplification, and earthquake stress drops in the Portland, Oregon area

Site response, sedimentary basin amplification, and earthquake stress drops for the Portland, Oregon area were determined using accelerometer recordings at 16 sites of 10 local earthquakes with M D "> M D MD 2.6–4.0. A nonlinear inversion was applied to calculate site response (0.5–10 Hz), corner frequencies, and seismic moments from the Fourier spectra of the earthquakes. Site amplifications at lower frequencies of 0.1–2.0 Hz were determined from Fourier spectra of four regional earthquakes with M w "> M w Mw 5.8–6.4. Amplifications were calculated relative to a stiff‐soil site outside the Portland and Tualatin basins. Sites on artificial fill and Holocene alluvium show strong amplification peaks (factor of 5) around 1–2 Hz. Sites on the Portland Hills, consisting of thin soil over basalt, display spectral peaks at 4–5 Hz (factor of 4). Spectral peaks at both sites are similar to those predicted for vertically propagating S waves from V S "> V S VS profiles determined at these sites using a borehole and refraction microtremor analysis. The largest amplifications at 0.1–1 Hz were found at stiff‐soil sites in the Tualatin basin, based on recordings of regional earthquakes. Amplifications of a factor of 10, at about 0.3 Hz, were observed for a site in the deeper portion of the Tualatin basin and a factor of 7 at 0.5–0.6 Hz for two adjacent sites closer to the border of that basin. Stiff‐soil sites in the Portland basin exhibit amplifications of 2–3 at frequencies of about 0.3–0.8 Hz. The frequencies of the amplification peaks for the deep Tualatin basin site can be explained by S ‐wave resonance in the shallow sediments, but the observed amplification is underestimated. Earthquake stress drops determined from the inversion range from 3 to 11 MPa, with no overall dependence on seismic moment.

Oregon↗

USGS2024

Limited evidence of late Quaternary tectonic surface deformation in the eastern Tennessee seismic zone, USA

The ~300-km-long eastern Tennessee seismic zone (ETSZ), USA, is the second-most seismically active region east of the Rocky Mountains. Seismicity generally occurs below the Paleozoic fold-and-thrust belt within the Mesoproterozoic basement, at depths of 5–26 km, and earthquake magnitudes during the instrumental record have been moment magnitude ( M w )≤4.8. Evidence of surface deformation may not exist or be difficult to detect because of the vegetated and soil-mantled landscape, landslides, locally steep topography, anthropogenic landscape modification, or long, irregular recurrence intervals between surface-rupturing earthquakes. Despite the deep seismicity, analog models indicate that accumulation of strike-slip or oblique-slip displacement at depth could be expected to propagate upward through the Paleozoic section, producing a detectable surficial signal of distributed faulting. To identify potential surface deformation, we interrogated the landscape at different spatial scales. We evaluated morphotectonic and channel metrics, such as channel sinuosity and catchment-scale hypsometry. Additionally, we mapped possible fault-related topographic features on 1-m lidar. Finally, we integrated our observations with available bedrock and Quaternary surficial mapping and subsurface geophysical data. At a regional scale, most morphotectonic and channel metrics have a strong lithologic control. Within smaller regions of similar lithology, we observe changes in landscape metrics like channel sinuosity and catchment-scale hypsometry that spatially correlate with new lineaments identified in this study and previously mapped east–west Cenozoic faults. These faults have apparent left-lateral offsets, are optimally oriented to slip in the current stress field, and match kinematics from recent focal mechanisms, but do not clearly preserve evidence of late Pleistocene or Holocene tectonic surface deformation. Most newly mapped lineaments might be explained by either tectonic or non-tectonic origins, such as fluvial or karst processes. We also re-evaluated a previously described paleoseismic site and interpret that the exposure does not record evidence of late Pleistocene faulting but instead is explained by fluvial stratigraphy.

Tennessee↗

USGS2013

The northwest trending north Boquerón Bay-Punta Montalva Fault Zone; A through going active fault system in southwestern Puerto Rico

The North Boquerón Bay–Punta Montalva fault zone has been mapped crossing the Lajas Valley in southwest Puerto Rico. Identification of the fault was based upon detailed analysis of geophysical data, satellite images, and field mapping. The fault zone consists of a series of Cretaceous bedrock faults that reactivated and deformed Miocene limestone and Quaternary alluvial fan sediments. The fault zone is seismically active (local magnitude greater than 5.0) with numerous locally felt earthquakes. Focal mechanism solutions suggest strain partitioning with predominantly east–west left-lateral displacements with small normal faults striking mostly toward the northeast. Northeast-trending fractures and normal faults can be found in intermittent streams that cut through the Quaternary alluvial fan deposits along the southern margin of the Lajas Valley, an east–west-trending 30-km-long fault-controlled depression. Areas of preferred erosion within the alluvial fan trend toward the west-northwest parallel to the onland projection of the North Boquerón Bay fault. The North Boquerón Bay fault aligns with the Punta Montalva fault southeast of the Lajas Valley. Both faults show strong southward tilting of Miocene strata. On the western end, the Northern Boquerón Bay fault is covered with flat-lying Holocene sediments, whereas at the southern end the Punta Montalva fault shows left-lateral displacement of stream drainage on the order of a few hundred meters.

Puerto Rico↗

USGS2015

The Mw6.0 24 August 2014 South Napa earthquake

The M w 6.0 South Napa earthquake, which occurred at 10:20 UTC 24 August 2014 was the largest earthquake to strike the greater San Francisco Bay area since the M w 6.9 1989 Loma Prieta earthquake. The rupture from this right‐lateral earthquake propagated mostly unilaterally to the north and up‐dip, directing the strongest shaking toward the city of Napa, where peak ground accelerations (PGAs) between 45% g and 61% g were recorded and modified Mercalli intensities (MMIs) of VII–VIII were reported. Tectonic surface rupture with dextral slip of up to 46 cm was observed on a 12.5 km long segment, some of which was along a previously mapped strand of the West Napa fault system, although the rupture extended to the north of the mapped Quaternary strand. Modeling of seismic and geodetic data suggests an average coseismic slip of 50 cm, with a maximum slip of about 1 m at depths of 10–11 km. We observed up to 35 cm of afterslip along the surface trace in the week following the mainshock, primarily along the southern half of the surface rupture that experienced relatively little coseismic offset. Relocation of the sparse aftershock sequence suggests en echelon southwest‐ and northeast‐dipping fault planes, reflective of the complex fault geometry in this region. The Napa basin and historic and late Holocene alluvial flood deposits in downtown Napa amplified the ground motions there. Few ground failures were mapped, reflecting the dry season (as well as a persistent drought that had lowered the groundwater table) and the short duration of strong shaking in the epicentral area.

California↗

USGS2024

Recent expansion of the Cascades Volcano Observatory geophysical network at Mount Rainier for improved volcano and lahar monitoring

The U.S. Geological Survey Cascades Volcano Observatory (CVO) recently expanded its continuous geophysical monitoring at Mount Rainier, an active stratovolcano in Washington state. CVO monitors volcanoes in Oregon, Washington, and Idaho to characterize volcanic systems and detect unrest. Mount Rainier has a history of large lahar occurrences in the Holocene, including at least one that may not have been associated with volcanic activity. Pierce County, Washington, is one of the areas most at risk from large lahars. In the 1990s, CVO collaborated with Pierce County to install the Rainier lahar detection system (RLDS), an automated system designed to detect large lahars in high‐risk drainages and mitigate hazards to heavily populated areas. The system was designed to detect lahars within 5–10 min of their occurrence and alert authorities of the need to evacuate populated low‐lying areas before lahar arrival. In addition, CVO and the Pacific Northwest Seismic Network (PNSN) maintained and expanded a network of seismic and geodetic monitoring stations on and near the edifice to provide adequate volcano monitoring capabilities. Since 2016, CVO has worked to upgrade the existing RLDS and to expand its capabilities into other drainages around Mount Rainier. This expansion includes installation of 25 new broadband seismic stations with many including infrasound along high‐risk drainages, as well as support for equipment upgrades at existing PNSN and CVO volcano monitoring sites. All stations transmit continuous, near‐real‐time data with dramatically improved spatial coverage for volcano monitoring and lahar hazard mitigation compared to the previous system.

Washington↗

USGS2024

Paleoseismology of the Sawtooth fault and implications for fault behavior in the epicentral region of the 2020 Mw 6.5 Stanley, Idaho, earthquake

The 2020 moment magnitude ( M w ⁠⁠ ) 6.5 Stanley, Idaho, earthquake raised questions about the history and extent of complex faulting in the northwestern Centennial Tectonic Belt (CTB) and its relation to the Sawtooth normal fault and Eocene Trans‐Challis fault system (TCFS). To explore faulting in this area, we excavated a paleoseismic trench across the Sawtooth fault along the western margin of the CTB, and compared an early Holocene (9.1 ± 2.1 ka, 1δ ⁠ ) rupture at the site with lacustrine paleoseismic data and fault mapping in the 2020 epicentral region. We find: (1) a history of partial to full rupture of the Sawtooth fault ( M w ⁠ 6.8–7.4), (2) that shorter ruptures ( M w ≤ ⁠⁠6.9 ) are likely along distributed and discontinuous faults in the epicentral region, (3) that this complex system that hosted the 2020 earthquake is not directly linked to the Sawtooth fault, (4) that the northeast‐trending TCFS likely plays a role in controlling fault length and rupture continuity for adjacent faults, and (5) that parts of the TCFS may facilitate displacement transfer between normal faults that accommodate crustal extension and rotation. Our results help unravel complex faulting in the CTB and imply that relict structures can help inform regional seismic hazard assessments.

Idaho↗

USGS1996

Site response for urban Los Angeles using aftershocks of the Northridge earthquake

Ground-motion records from aftershocks of the 1994 Northridge earthquake are used to estimate site response in the urban Los Angeles area. Over 1300 shear-wave records from 61 sources and 90 sites are used in a linear inversion for source and site-response spectra. The methodology makes no assumptions about the shape of the source spectrum. To obtain a stable unique inverse, a Q model and geometrical spreading factor are assumed. In addition, the site response at a hard-rock site is constrained to be approximately 1.0 with a kappa of 0.02. The site-response spectra compare favorably with the results of previous and on-going investigations in Los Angeles. A couple of first-order effects are lower site response in the surrounding mountains, dominated by Mesozoic and Tertiary rocks, and higher values in the San Fernando and Los Angeles Basins, containing surficial Pleistocene and Holocene alluvial deposits. Results show good correlation of high site-response spectral values with localized areas of severe damage (Interstate 10 collapse, Sherman Oaks, Northridge, Interstate 5/14 collapse). However, widespread trends in site response across the sedimentary basins are not obvious. The data suggest that site responses are lower near the southern margin of the San Fernando Valley for sources to the north, due to north-dipping sedimentary structures. But the general pattern of site response is characterized by high variability on length scales less than a kilometer. Variations of a factor of 2 in site response are observed over the length scale of 200 m and for the same surficial geologic unit. For some of the alluvial basin sites, surface-wave generation is a significant contributor to elevated site response at lower frequencies, below 2 Hz. The total damage pattern for the Northridge earthquake is influenced by strong source directivity to the north and strong local site effects. The correlation of weak-motion site-response estimates with areas of significant damage demonstrates the value of these field measurements in future urban planning and in the reduction of seismic risk in urban areas.

California↗

USGS1998

Source character of microseismicity in the San Francisco Bay block, California, and implications for seismic hazard

We examine relocated seismicity within a 30-km-wide crustal block containing San Francisco Bay and bounded by two major right-lateral strike-slip fault systems, the Hayward and San Andreas faults, to determine seismicity distribution, source character, and possible relationship to proposed faults. Well-located low-level seismicity ( M d ≦ 3.0) has occurred persistently within this block throughout the recording interval (1969 to 1995), with the highest levels of activity occurring along or directly adjacent to (within ∼5 km) the bounding faults and falling off toward the long axis of the bay. The total seismic moment release within the interior of the Bay block since 1969 is equivalent to one M L 3.8 earthquake, one to two orders of magnitude lower than activity along and within 5 km of the bounding faults. Focal depths of reliably located events within the Bay block are generally less than 13 km with most seismicity in the depth range of 7 to 12 km, similar to focal depths along both the adjacent portions of the San Andreas and Hayward faults. Focal mechanisms for M d 2 to 3 events within the Bay block mimic focal mechanisms along the adjacent San Andreas fault zone and in the East Bay, suggesting that Bay block is responding to a similar regional stress field. Two potential seismic source zones have been suggested within the Bay block. Our hypocentral depths and focal mechanisms suggest that a proposed subhorizontal detachment fault 15 to 18 km beneath the Bay is not seismically active. Several large-scale linear NW-trending aeromagnetic anomalies within the Bay block were previously suggested to represent large through-going subvertical fault zones. The two largest earthquakes (both M d 3.0) in the Bay block since 1969 occur near two of these large-scale linear aeromagnetic anomalies; both have subvertical nodal planes with right-lateral slip subparallel to the magnetic anomalies, suggesting that structures related to the anomalies may be capable of brittle failure. Geodetic, focal mechanism and seismicity data all suggest the Bay block is responding elastically to the same regional stresses affecting the bounding faults; however, continuous Holocene reflectors across the proposed fault zones suggest that if the magnetic anomalies represent basement fault zones, then these faults must have recurrence times one to several orders of magnitude longer than on the bounding faults.

California↗

USGS2002

The Commerce geophysical lineament and its possible relation to Mesoproterozoic igneous complexes and large earthquakes in the central Illinois Basin

New inversions of existing magnetic and gravity data lead to insights on upper crustal structures in the central Illinois basin. The results of 2D and 3D inversion techniques suggest that the source of the Commerce geophysical lineament follows the southeast boundary of a dense and magnetic, northeast-trending igneous center, named the Vincennes igneous center. Thus the Commerce geophysical lineament, defining the 5- to 10-km-wide Commerce deformation zone, appears to have influenced the structural development of the Vincennes igneous center. Overlying this igneous center is the Centralia seismic-reflection sequence, expressed as highly coherent reflectors ( McBride and Kolata, 1999 ). We suggest that the buried Vincennes igneous center is the source of inferred volcanic units of the Centralia sequence and is related to a rifted margin or a Proterozoic plate boundary. A comparison of gravity and magnetic fields over the Vincennes igneous center and the St. Francois Mountains igneous center in southeastern Missouri suggests that the associated sources in these regions are similar in composition and perhaps origin. Such a conclusion, although speculative, suggests that ∼1.47 Ga-year-old volcanic fields of high-silica rocks, with more abundant mafic components at depth, characterize basement in the regions of the Vincennes igneous center and the St. Francois Mountains. Further, we conclude that the Commerce deformation zone evolved in the Mesoproterozoic (1.1 to 1.5 Ga) as a major cratonic rheological boundary and was the focus of episodic reactivation related to varying stress regimes throughout its history. Spatial relations of the Commerce deformation zone with large Pleistocene and Holocene earthquakes suggest that the zone represents a major rheological boundary intimately related to both surface and deep structures and to the seismic hazard of the Illinois basin region. Assuming recent right-lateral slip along the Commerce deformation zone, we propose that a jog or left step in the Vincennes area leads to thrusting or a restraining bend, where associated stress accumulations may have resulted in nearby large prehistoric earthquakes and may also be the nucleation sites of future large earthquakes.

Illinois, Indiana, Kentucky↗

USGS2005

Wagon loads of sand blows in White County, Illinois

Several anecdotal accounts provide compelling evidence that liquefaction occurred at several sites in Illinois during the 1811-1812 New Madrid sequence, as much as 250 km north of the New Madrid seismic zone (NMSZ). At one Wabash Valley location, sand blows are still evident near Big Prairie, Illinois, a location described in a particularly detailed and precise historic account. This account includes descriptions of substantial liquefaction (sand blows) as well as a two-mile-long east-west-trending “crack” along which two feet of south-side-down displacement occurred. An offset can no longer be seen at this location, which has been extensively farmed and plowed for decades. Field reconnaissance verifies many of the details provided in the account, however. We conducted a seismic-reflection experiment at this location and observed a modest offset in the Paleozoic strata at this location. The offset is opposite to that described in the historic account, consistent with the hypothesis that large midcontinent earthquakes occur on faults reactivated in a Holocene stress regime different from the one in which they were formed. Only two explanations can account for these observations: Either large NMSZ events triggered substantial liquefaction at distances greater than hitherto realized, or at least one large “New Madrid” event occurred significantly north of the NMSZ. We explore these possibilities and conclude that, while neither one can be ruled out, several disparate lines of evidence suggest that the 23 January 1812 “New Madrid mainshock” occurred in White County, Illinois, near the location of the m b 5.5 1968 southern Illinois earthquake and recent microearthquake activity.

Illinois↗

USGS2005

Revised magnitude-bound relation for the Wabash Valley seismic zone of the central United States

Seismic hazard assessment in the central United States, and in particular the Wabash Valley seismic zone of Indiana-Illinois, frequently relies on empirical estimates of paleoearthquake magnitudes ( M ). In large part these estimates have been made using the magnitude-bound method. Existing region-specific magnitude-bound relations rely heavily on only a few historical earthquakes in the central United States and eastern Canada that induced reported liquefaction features. Recent seismological studies have suggested smaller magnitudes than previously presumed for some of these earthquakes, however, and other studies have reinterpreted site-to-source distances to liquefaction features associated with some of these earthquakes. In this paper, we re-examine historical earthquakes ( M > ∼5) that occurred in the central and eastern United States and eastern Canada; some of these earthquakes triggered liquefaction and others did not. Based on our findings, we reinterpret the region-specific magnitude-bound relation for the Wabash Valley. Using this revised magnitude-bound relation, we present magnitude estimates for four prehistoric earthquakes that occurred in the Wabash Valley seismic zone during Holocene time.

Illinois, Indiana↗

USGS2011

Developing seismogenic source models based on geologic fault data

Calculating seismic hazard usually requires input that includes seismicity associated with known faults, historical earthquake catalogs, geodesy, and models of ground shaking. This paper will address the input generally derived from geologic studies that augment the short historical catalog to predict ground shaking at time scales of tens, hundreds, or thousands of years (e.g., SSHAC 1997). A seismogenic source model, terminology we adopt here for a fault source model, includes explicit three-dimensional faults deemed capable of generating ground motions of engineering significance within a specified time frame of interest. In tectonically active regions of the world, such as near plate boundaries, multiple seismic cycles span a few hundred to a few thousand years. In contrast, in less active regions hundreds of kilometers from the nearest plate boundary, seismic cycles generally are thousands to tens of thousands of years long. Therefore, one should include sources having both longer recurrence intervals and possibly older times of most recent rupture in less active regions of the world rather than restricting the model to include only Holocene faults (i.e., those with evidence of large-magnitude earthquakes in the past 11,500 years) as is the practice in tectonically active regions with high deformation rates. During the past 15 years, our institutions independently developed databases to characterize seismogenic sources based on geologic data at a national scale. Our goal here is to compare the content of these two publicly available seismogenic source models compiled for the primary purpose of supporting seismic hazard calculations by the Istituto Nazionale di Geofisica e Vulcanologia (INGV) and the U.S. Geological Survey (USGS); hereinafter we refer to the two seismogenic source models as INGV and USGS, respectively. This comparison is timely because new initiatives are emerging to characterize seismogenic sources at the continental scale (e.g., SHARE in the Euro-Mediterranean, http://www.share-eu.org/; EMME in the Middle East, http://www.emme-gem.org/) and global scale (e.g., GEM, http://www.globalquakemodel.org/; Anonymous 2008). To some extent, each of these efforts is still trying to resolve the level of optimal detail required for this type of compilation. The comparison we provide defines a common standard for consideration by the international community for future regional and global seismogenic source models by identifying the necessary parameters that capture the essence of geological fault data in order to characterize seismogenic sources. In addition, we inform potential users of differences in our usage of common geological/seismological terms to avoid inappropriate use of the data in our models and provide guidance to convert the data from one model to the other (for detailed instructions, see the electronic supplement to this article). Applying our recommendations will permit probabilistic seismic hazard assessment codes to run seamlessly using either seismogenic source input. The USGS and INGV database schema compare well at a first-level inspection. Both databases contain a set of fields representing generalized fault three-dimensional geometry and additional fields that capture the essence of past earthquake occurrences. Nevertheless, there are important differences. When we further analyze supposedly comparable fields, many are defined differently. These differences would cause anomalous results in hazard prediction if one assumes the values are similarly defined. The data, however, can be made fully compatible using simple transformations.

Seismological Research Letters↗

USGS2016

Quaternary alluvial fans of Ciudad Juárez, Chihuahua, northern México: OSL ages and implications for climatic history of the region

Alluvial fans formed from sediments derived from erosion of the Juárez Mountains in northernmost México have a significant flood impact on the Ciudad Juárez, which is built on the fan system. The northern part of Ciudad Juárez is the most active; further south, older parts of the fan, upon which the rest of the city is built, were largely eroded by natural processes prior to human habitation and subsequently modified only recently by human construction. Three aeolian sand samples, collected from the uppermost (youngest) parts of the fan system in the city area, in places where human intervention has not disturbed the sediment, and constrain the latest dates of fan building. Depositional ages of the Quaternary alluvial fans were measured using Optically Stimulated Luminescence (OSL) on aeolian sands that have inter-fingered with alluvial fan material. These dates are: a) sample P1, 31 ka; b) sample P2, 41 ka; c) sample P3, 74 ka, between Oxygen Isotope Stages (OIS) 3 to 5. They demonstrate that fan development, in the area now occupied by the city, terminated in the Late Pleistocene, immediately after what we interpret to have been an extended period of erosion without further deposition, lasting from the Late Pleistocene to Holocene. The three dates broadly correspond to global glacial periods, implying that the cool, dry periods may reflect periods of aeolian transport in northern México in between phases that were wetter to form the alluvial fans. Alluvial fan margins inter-finger with fluvial terrace sediments derived from the Río Bravo, indicating an additional component of fan dissection by Río Bravo lateral erosion, presumed to be active during earlier times than our OSL ages, but these are not yet dated. Further dating is required to ascertain the controls on the fan and fluvial system.

Ciudad Juarez↗

USGS2009

Response of the everglades ridge and slough landscape to climate variability and 20th-century water management

The ridge and slough landscape of the Florida Everglades consists of a mosaic of linear sawgrass ridges separated by deeper-water sloughs with tree islands interspersed throughout the landscape. We used pollen assemblages from transects of sediment cores spanning sawgrass ridges, sloughs, and ridge-slough transition zones to determine the timing of ridge and slough formation and to evaluate the response of components of the ridge and slough landscape to climate variability and 20th-century water management. These pollen data indicate that sawgrass ridges and sloughs have been vegetationally distinct from one another since initiation of the Everglades wetland in mid-Holocene time. Although the position and community composition of sloughs have remained relatively stable throughout their history, modern sawgrass ridges formed on sites that originally were occupied by marshes. Ridge formation and maturation were initiated during intervals of drier climate (the Medieval Warm Period and the Little Ice Age) when the mean position of the Intertropical Convergence Zone shifted southward. During these drier intervals, marsh taxa were more common in sloughs, but they quickly receded when precipitation increased. Comparison with regional climate records suggests that slough vegetation is strongly influenced by North Atlantic Oscillation variability, even under 20th-century water management practices. ?? 2009 by the Ecological Society of America.

Ecological Applications↗

USGS2012

High shrew diversity on Alaska's Seward Peninsula: Community assembly and environmental change

In September 2010, 6 species of shrews (genus: Sorex ) were collected at a single locality on the Seward Peninsula of Alaska. Such high sympatric diversity within a single mammalian genus is seldom realized. This phenomenon at high latitudes highlights complex Arctic community dynamics that reflect significant turnover through time as a consequence of environmental change. Each of these shrew species occupies a broad geographic distribution collectively spanning the entire Holarctic, although the study site lies within Eastern Beringia, near the periphery of all individual ranges. A review of published genetic evidence reflects a depauperate shrew community within ice-free Beringia through the last glaciation, and recent assembly of current diversity during the Holocene.

Alaska↗

USGS2018

The tectonically controlled San Gabriel Channel–Lobe Transition Zone, Catalina Basin, Southern California Borderland

High-resolution geophysical data across the Catalina Basin, offshore southern California, USA, reveal a complex channel–lobe transition zone (CLTZ) and provide an opportunity to characterize an entire seafloor CLTZ in a tectonically active and confined-basin setting. The seafloor morphology, distribution of depositional and erosional features, and location of depocenters in the CLTZ are controlled by shifting confinement and seafloor gradient related to inherited basement structures, active faults, and basin margins. Below a Holocene hemipelagic drape, the Catalina Basin is dominated by CLTZ and lobe sedimentation from the San Gabriel Channel, with lesser accumulations from local sediment sources limited to basin margins. The San Gabriel Channel is structurally confined as it enters the Catalina Basin and appears unable to avulse; it continues into the basin as a channel that rapidly widens, decreases in relief, and becomes scoured at its margins. A CLTZ is imaged between the confined San Gabriel channel and its terminal lobes deposited > 50 km into the basin. Narrow, apparently disconnected channels with knickpoints occur throughout the proximal and mid-CLTZ and are concentrated near basement highs and basin-bounding Quaternary-active dextral strike-slip faults. A field of small-scale erosional crescent-shaped scours (∼ 100 m length, ∼ 200 m width, up to ∼ 10 m relief across ∼ 30 km 2 region) occurs above a partially buried basement high that creates perturbations in seafloor gradient. Likewise, above a buried basement structure that locally increases seafloor gradient (up to 0.4°), the distal CLTZ may contain sediment waves (∼ 2–4 m wave height and ∼ 200–300 m wavelength) that are smaller than many other CLTZ examples. This study of the San Gabriel CLTZ in Catalina Basin provides high-resolution geophysical data coverage of a complete CLTZ and illustrates a tectonically controlled end-member CLTZ from the modern seafloor.

Journal of Sedimentary Research↗

USGS1991

Tectonic evolution of submarine canyons along the California continental margin

The development of submarine canyons along active-plate margins commonly is influenced by tectonic processes. Recent studies of submarine canyons along the transform margin of western North America show that the origin and subsequent evolution of many canyons are correlatable with plate motion and plate-margin deformation. Elements of canyon morphology such as bends and meanders commonly are controlled by faults and folds that are relatable to the structural fabric of the continental shelf and slope. Some canyon heads that appear to be displaced from their lower reaches are explainable as the result of movement along strike-slip faults associated with the plate margin. Many submarine canyons along the California margin are not associated with large rivers and thus may owe their origins either to pre-Holocene fluvial or structural processes. Some modern canyons appear to be associated with pre-Pleistocene ancestral canyons. Because of both vertical and horizontal tectonic movements during the past 20 Ma, some California submarine canyons have been repeatedly filled and exhumed; the most recent exhumation began during the latest lowstand of sea level and continues today. Canyons that today have their upper reaches on the continental slope or outermost shelf, distant from large rivers or other sources of sediment supply, commonly appear to have been laterally displaced along offshore faults. Palinspastic reconstructions along these faults commonly reveal a genetic relation between such canyons and canyons heading nearshore, from which they were offset. For example, detailed studies of the Ascension-Monterey Submarine Canyon system in Monterey Bay suggest that several smaller canyons on the outer shelf and upper slope have been displaced northwestward from the headward part of Monterey Canyon by right slip along offshore faults of the Palo Colorado-San Gregorio, Ascension, and Monterey Bay fault zones. Many other canyons on the California margin have developed along, or had their courses abruptly altered by, structural zones, owing either to canyon cutting along a zone of weakness or to fault displacement. Mass wasting associated with zones of faulting and slumping, which may have been seismically induced, also may affect canyon form. Clearly, submarine canyons along the California margin commonly owe their origin and morphologic development to influences other than fluvial erosion during sea-level lowstands. A chief influence has been the San Andreas fault system.

California↗