Geology Reports⌕ Search

SEARCH · Geology Reports

Results for “Topographic Map”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,513 records · Page 84Linked to original sources

Approximate potentiometric surface of the bedrock aquifer at Great Bay, southeastern New Hampshire, 2001

Ground-water elevations (heads) in 265 wells were used to map the potentiometric-head surface in the fractured-bedrock aquifer adjacent to Great Bay, N.H. Remotely sensed data, spring-water temperatures and specific conductances, land-surface elevations, and simulated heads were also used to guide construction of the potentiometric surface. Heads in the bedrock aquifer locally varied more than 20 ft (feet) between adjacent wells as little as 200 ft apart. The depth to water below land surface was greater on the western and northwestern sides of the bay (about 20 ft) than on the southern and eastern sides (about 8 ft). Topography has a greater effect on heads than does temporal variation or measurement accuracy. Head gradients are steeper at the southern side of Great Bay, where the topographic relief is greatest, than at the northwestern and northeastern sides.

Open-File Report↗

National Assessment Of Shoreline Change: Part 2, Historical Shoreline Changes And Associated Coastal Land Loss Along The U.S. Southeast Atlantic Coast

EXECUTIVE SUMMARY Beach erosion is a chronic problem along most open-ocean shores of the United States. As coastal populations continue to grow and community infrastructures are threatened by erosion, there is increased demand for accurate information regarding past and present trends and rates of shoreline movement. There is also a need for a comprehensive analysis of shoreline movement that is consistent from one coastal region to another. To meet these national needs, the U.S. Geological Survey is conducting an analysis of historical shoreline changes along open-ocean sandy shores of the conterminous United States and parts of Hawaii and Alaska. One purpose of this work is to develop standard repeatable methods for mapping and analyzing shoreline movement so that periodic updates regarding coastal erosion and land loss can be made nationally that are systematic and internally consistent. This report on states comprising the Southeast Atlantic Coast (east Florida, Georgia, South Carolina, North Carolina) represents the second in a series that already includes the Gulf of Mexico and will eventually include the Northeast Atlantic Coast, Pacific Coast, and parts of Hawaii and Alaska. The report summarizes the methods of analysis, interprets the results, provides explanations regarding the historical and present trends and rates of change, and describes how different coastal communities are responding to coastal erosion. Shoreline change evaluations are based on comparing three historical shorelines with a recent shoreline derived from lidar (Light Detection and Ranging) topographic surveys. The historical shorelines generally represent the following periods: 1800s, 1920s-1930s, and 1970s, whereas the lidar shoreline is 1998-2002. Long-term rates of change are calculated using four shorelines (1800s to lidar shoreline), whereas short-term rates of change are calculated for the most recent period (1970s to lidar shoreline). The historical rates of change presented in this report represent past conditions and therefore are not intended for predicting future shoreline positions or rates of change. Rates of erosion for the Southeast Atlantic region were generally highest in South Carolina along barrier islands and headland shores associated with the Santee delta. Erosion was also rapid along some barrier islands in North Carolina. Highest rates of erosion in Florida were generally localized around tidal inlets. The most stable Southeast Atlantic beaches were along the east coast of Florida where low wave energy and frequent beach nourishment minimized erosion. Some beach segments in Florida accreted as a result of net longshore drift convergence around Cape Canaveral and around tidal inlets that were stabilized by jetties. Seawalls, riprap revetments, and groins were constructed in all the Southeast Atlantic states as initial community responses to long-term beach erosion. Although some states, such as Florida, still permit shoreline stabilization structures, beach nourishment has become the preferred method of mitigating long-term erosion. Beach nourishment is common in all of the Southeast Atlantic states except Georgia.

southeast Atlantic coast↗

Airborne imaging spectrometer data of the Ruby Mountains, Montana: Mineral discrimination using relative absorption band-depth images

Airborne imaging spectrometer data collected in the near-infrared (1.2–2.4 μm) wavelength range were used to study the spectral expression of metamorphic minerals and rocks in the Ruby Mountains of southwestern Montana. The data were analyzed by using a new data enhancement procedure—the construction of relative absorption band-depth (RBD) images. RBD images, like bandratio images, are designed to detect diagnostic mineral absorption features, while minimizing reflectance variations related to topographic slope and albedo differences. To produce an RBD image, several data channels near an absorption band shoulder are summed and then divided by the sum of several channels located near the band minimum. RBD images are both highly specific and sensitive to the presence of particular mineral absorption features. Further, the technique does not distort or subdue spectral features as sometimes occurs when using other data normalization methods. By using RBD images, a number of rock and soil units were distinguished in the Ruby Mountains including weathered quartz - feldspar pegmatites, marbles of several compositions, and soils developed over poorly exposed mica schists. The RBD technique is especially well suited for detecting weak near-infrared spectral features produced by soils, which may permit improved mapping of subtle lithologic and structural details in semiarid terrains. The observation of soils rich in talc, an important industrial commodity in the study area, also indicates that RBD images may be useful for mineral exploration.

Montana↗

Ground-water resources data for Warren County, Pennsylvania

This report presents lithologic, hydrologic, and chemical data collected during a study of the ground-water resources of Warren County, Pa. The study was conducted during 1983-90 by the U.S. Geological Survey, in cooperation with the Pennsylvania Department of Conservation and Natural Resources, Bureau of Topographic and Geologic Survey, and the Warren County Commissioners. The data include information on aquifers, water levels, and yields for about 600 wells, and records for 57 springs. Descriptions of aquifer lithology and chemical analyses of water samples collected at well and spring sites are provided. Chemical analyses include major cations, anions, nutrients, and selected trace elements. Also included are data on concentrations of volatile organic compounds, dissolved methane, ethane, propane, and total organic carbon. The report presents a summary of the source and significance of selected chemical constituents in ground water, a listing of Federal drinking water standards, and information on selected methods of removing or reducing concentrations of undesirable chemical constituents from water. Daily ground- water levels for five observation wells are tabulated. Maps of Warren County show the location of townships, boroughs, and 7-1/2-minute quadrangles. Data-collection sites are shown on 18 figures. A glossary is provided for readers unfamiliar with ground-water terminology.

Open-File Report↗

Modeling the human invader in the United States

Modern biogeographers recognize that humans are seen as constituents of ecosystems, drivers of significant change, and perhaps, the most invasive species on earth. We found it instructive to model humans as invasive organisms with the same environmental factors. We present a preliminary model of the spread of modern humans in the conterminous United States between 1992 and 2001 based on a subset of National Land Cover Data (NLCD), a time series LANDSAT product. We relied on the commonly used Maxent model, a species-environmental matching model, to map urbanization. Results: Urban areas represented 5.1% of the lower 48 states in 2001, an increase of 7.5% (18,112 km 2 ) in the nine year period. At this rate, an area the size of Massachusetts is converted to urban land use every ten years. We used accepted models commonly used for mapping plant and animal distributions and found that climatic and environmental factors can strongly predict our spread (i.e., the conversion of forests, shrub/grass, and wetland areas into urban areas), with a 92.5% success rate (Area Under the Curve). Adding a roads layer in the model improved predictions to a 95.5% success rate. 8.8% of the 1-km 2 > cells in the conterminous U.S. now have a major road in them. In 2001, 0.8% of 1-km 2 > cells in the U.S. had an urbanness value of > 800, (>89% of a 1-km 2 > cell is urban), while we predict that 24.5% of 1-km 2 > cells in the conterminous U.S. will be > 800 eventually. Main conclusion: Humans have a highly predictable pattern of urbanization based on climatic and topographic variables. Conservation strategies may benefit from that predictability.

Journal of Applied Remote Sensing↗

Movement triggers and remediation in a fracture-dominated translational landslide at the Oregon coast

The Johnson Creek landslide is a translational slide in seaward dipping Miocene siltstone and sandstone (Astoria Formation) and an overlying Quaternary marine terrace deposit. The slide terminates in a sea cliff and has a hummocky to nearly horizontal ground surface. The basal slide plane, however, slopes subparallel to the dip of the Miocene rocks, except beneath the back-tilted toe blocks where it curves upward. The siltstone and sandstone have low estimated permeability but cores and field mapping reveal an extensive fracture system within the slide mass. The slide mainly moves in response to groundwater pressure and coastal erosion of the toe. Limit-equilibrium stability analyses indicate that 3 m of erosion at the toe would destabilize the slide for most of the wet season, although no movement could be directly attributed to erosion in the 5 years of observation. Intense rainfall events raise pore-water pressure throughout the slide in the form of pulses of water pressure traveling from the headwall graben down the axis of the slide at rates of 1.4-2.5 m/hr in the upper part, and 3.5 m/hr to virtually instantaneous in the middle part. Infiltration of meteoric water was only ~50 mm/hr. Slope of the water table exceeds topographic slope from the head to the toe of the slide, so infiltration was too slow to directly raise head in 90 percent of the slide mass where the saturated zone is deeper than a few meters. Only at the headwall graben was the saturated zone shallow enough for rainfall events to trigger pulses of water pressure through the entire saturated zone. When a pressure pulse reached the threshold pressure for movement in the central part of the slide, the whole slide began slow, creeping movement. As head became larger and larger than the threshold for movement in more of the slide mass, movement accelerated and differential displacement between internal slide blocks became more pronounced. These findings suggest that dewatering the shallowest part of the saturated zone in this type of slide will stop these rapid pressure pulses, thereby stopping or greatly reducing seasonal movement. If slides are also subject to continual removal of material from the toe, especially where there are back-tilted toe blocks, then some type of buttress or tied-back shear pile wall may be the only effective long term remediation.

Oregon↗

The observed relationship between wave conditions and beach response, Ocean Beach, San Francisco, CA

Understanding how sandy beaches respond to storms is critical for effective sediment management and developing successful erosion mitigation efforts. However, only limited progress has been made in relating observed beach changes to wave conditions, with one of the major limiting factors being the lack of temporally dense beach topography and nearshore wave data in most studies. This study uses temporally dense beach topographic and offshore wave data to directly link beach response and wave forcing with generally good results. Ocean Beach is an open coast high-energy sandy beach located in San Francisco, CA, USA. From April 2004 through the end of 2008, 60 three-dimensional topographic beach surveys were conducted on approximately a monthly basis, with more frequent “short-term surveys during the winters of 2005-06 and 2006-07. Shoreline position data from the short-term surveys show good correlation with offshore wave height, period, and direction averaged over several days prior to the survey (mean R*=0.54 for entire beach). There is, however, considerable alongshore variation in model performance, with R- values ranging from 0.81 to 0.19 for individual sections of the beach. After wave height, the direction of wave approach was the most important factor in determining the response of the shoreline, followed by wave period. Our results indicate that an empirical predictive model of beach response to wave conditions at Ocean Beach is possible with frequent beach mapping and wave data, and that such a model could be useful to coastal managers.

California↗

Digital topographic data based on lidar survey of Mount Shasta Volcano, California, July-September 2010

The most voluminous of the Cascade volcanoes, northern California’s Mount Shasta, is a massive compound stratovolcano composed of at least four main edifices constructed over a period of at least 590,000 years. An ancestral Shasta volcano was destroyed by Earth’s largest known Quaternary subaerial debris avalanche, which filled Shasta Valley, northwest of the volcano. The Hotlum cone, forming the present summit, the Shastina lava dome complex, and the Black Butte lava dome on the southwest flank, were constructed during the early Holocene. As part of the American Recovery and Reinvestment Act (ARRA) of 2009, the U.S. Geological Survey was awarded funding for high-precision airborne lidar (light detection and ranging) data collection at several volcanoes in the Cascade Range. Data collection was arranged by the Oregon Lidar Consortium, administered by the Oregon Department of Geology and Mineral Industries (DOGAMI). The Oregon Lidar Consortium contracted with Watershed Sciences, Inc., to collect 1,220 square km of high-precision airborne lidar data. These data provide a digital map of the ground surface beneath forest cover with horizontal resolution of 1 m (average of 1.82 ground laser returns per square meter) and estimated vertical accuracy of ±4 centimeters (1 sigma), and horizontal accuracies of ±1.5 centimeters. These data will contribute to monitoring and description of natural hazards, the study of regional geology and volcanic landforms, and analysis of landscape modification during and after the next volcanic eruption at Mount Shasta. Survey Bounding Coordinates: West Bounding Coordinate: −122.438774 East Bounding Coordinate: −121.888382 North Bounding Coordinate: 41.564495 South Bounding Coordinate: 41.126339

California↗

Gently dipping normal faults identified with Space Shuttle radar topography data in central Sulawesi, Indonesia, and some implications for fault mechanics

Space-shuttle radar topography data from central Sulawesi, Indonesia, reveal two corrugated, domal landforms, covering hundreds to thousands of square kilometers, that are bounded to the north by an abrupt transition to typical hilly to mountainous topography. These domal landforms are readily interpreted as metamorphic core complexes, an interpretation consistent with a single previous field study, and the abrupt northward transition in topographic style is interpreted as marking the trace of two extensional detachment faults that are active or were recently active. Fault dip, as determined by the slope of exhumed fault footwalls, ranges from 4° to 18°. Application of critical-taper theory to fault dip and hanging-wall surface slope, and to similar data from several other active or recently active core complexes, suggests a theoretical limit of three degrees for detachment-fault dip. This result appears to conflict with the dearth of seismological evidence for slip on faults dipping less than ~ 30°. The convex-upward form of the gently dipping fault footwalls, however, allows for greater fault dip at depths of earthquake initiation and dominant energy release. Thus, there may be no conflict between seismological and mapping studies for this class of faults.

Sulawesi↗

Shelf-edge deltas and drowned barrier-island complexes on the northwest Florida outer continental shelf

A high-resolution multibeam survey of the northwest Florida shelf mapped six relict shelf-edge deltas, each with a drowned barrier-island system developed on its south and southwestern rims. The deltas appear to have formed during periods of sea-level stasis that occurred between 58,000 and 28,000 years ago. The barrier islands formed on the deltas during periods of slow regression during this same time interval. Large fields of asymmetric dunes are found on the delta surfaces as well as on the south and southwestern flanks of the deltas. The asymmetry and orientation of the dunes suggest that a northward-flowing current was sheared by the presence of the delta topography, and as a result, the upper layer of the flow continued to the north, whereas the lower layer was steered by the topography. The topographic steering accelerated the northward flow around the south and southwestern flanks with speeds adequate to form large dunes. The flow slowed after rounding southwestern flank but accelerated again as it encountered the next delta flank to the north. The age of the dune formation is unknown, and no northward-flowing geostrophic flow has been reported in the literature from this area. ?? 2004 Elsevier B.V. All rights reserved.

Geomorphology↗

The vertical gradient of gravity in vertical and near vertical boreholes

The vertical gradient of gravity is the rate of change of gravity in the direction of the plumb line. For a vertical borehole interval, it is approximated by the ratio of the gravity difference to the height difference as measured between the end points of the interval. The borehole vertical gradient is strongly affected by the densities of the rocks laterally adjacent to the well. Because of this useful effect, vertical (gravimetric) density profiles of the rooks adjacent to the borehole can be calculated from the borehole vertical gradients. A second useful effect, termed the "anomalous" vertical gradient, is caused by non-level equal-density surfaces related to the local and regional geology. The anomalous vertical gradient can enhance exploration beyond the confines of the borehole although it is a small and commonly negligible effect. These two useful effects are not determinable with absolute accuracy from observed borehole vertical gradients without independent subsurface rock density and (or) surface gravity information. In this study observed vertical gradients from high-precision, detailed gravity surveys made in seven shallow oil wells that penetrate a late Cenozoic sequence of marine and non-marine rocks in the Midway-Sunset Oil Field, California, are interpreted to obtain vertical density profiles. These gravimetric density profiles are adjusted 1) for anomalous vertical gradients calculated from surface gravity maps end, alternatively, measured on a portable tower and 2) for small extraneous effects of surface topography. The unadjusted and adjusted density profiles are compared with density measurements of core samples. The unadjusted density profiles of six wells are on the average systematically greater than core densities by .05 g/cm 3 . Adjusted profiles for the same wells agree with core densities to within .01 g/cm 3 on the average. Densities of an adjusted profile of a seventh well are .15 g/cm 3 less than those of the unadjusted profile and are in better agreement with core densities by that amount. However, residual systematic discrepancies between core and gravimetric densities for this seventh well indicate a measurable variation of the anomalous vertical gradient with depth and (or) lack of representative core density data. Topographic effects and anomalous vertical gradients in boreholes are usually small and change slowly with depth but, in some instances, may be comparatively large and change rapidly with depth. In the former case, gravimetric density profiles unadjusted for these effects can be in error by as much as about .05 g/cm 3 and, in the latter case, by as much as several tenths of a g/cm 3 . In both cases, relative errors between neighboring parts of the density profiles are much smaller. In cases where the anomalous vertical gradient changes appreciably with depth, it cannot be reliably estimated in the borehole from surface gravity measurements or from tower gradient measurements, which are especially sensitive to very shallow local density irregularities. At any borehole depth the anomalous gradient can be estimated from the difference between core and gravimetric densities of the same borehole interval. The core densities must be highly accurate and representative of the interval and the gravimetric density must he adjusted for topographic effects. Measured borehole vertical gradients have precisions of .00025 to .00050 mgal/ft (8 to 16 Eotvos units) for vertical intervals as small as 10 feet (3 meters); this meets the most stringent requirements of recognized applications for borehole gravimetry. An ideal borehole density logging device would be an in-motion continuously recording vertical gravity gradiometer.

Open-File Report↗

Channel morphology and large wood control postfire debris-flow erosion and deposition

Runoff-generated debris flows are a known response to wildfire, and accurately predicting the volume of these debris flows is important for estimating the magnitude of downstream hazards. Prior data collection efforts have focused on debris-flow volume measurements at catchment outlets, but few studies have considered how erosion and deposition modulate the volume of sediment arriving at catchment outlets. This study takes advantage of a high-resolution dataset to document the factors that control the total debris-flow volume reaching the catchment outlet during a fatal postfire debris flow. Using pre- and post-event airborne lidar, satellite imagery and field mapping, we found that a postfire debris flow in the Black Hollow catchment in northern Colorado eroded 136,000 ± 30,000 m 3 and redeposited 27,000 ± 7,500 m 3 in the main channel. Most of the in-channel deposition (52% by volume) occurred where a confined channel reach transitioned to an unconfined channel reach downstream, allowing the flow to widen and deposit material. Wood jams played multiple roles in the debris-flow dynamics, both nucleating deposition (25% of the deposit volume was stored behind wood jams) and exacerbating erosion (50% of the total erosion occurred downstream from a wood dam break). The remaining deposition occurred due to spatial changes in channel slope as well as deposition observed at newly formed channel bars. Using these data in this study, we identified topographic and vegetation metrics that can be used (pre-event) to anticipate where deposition may occur in channels prior to a debris flow.

Colorado↗

Mapping the invasive species, Chinese tallow, with EO1 satellite Hyperion hyperspectral image data and relating tallow occurrences to a classified Landsat Thematic Mapper land cover map

Our objective was to provide a realistic and accurate representation of the spatial distribution of Chinese tallow (Triadica sebifera) in the Earth Observing 1 (EO1) Hyperion hyperspectral image coverage by using methods designed and tested in previous studies. We transformed, corrected, and normalized Hyperion reflectance image data into composition images with a subpixel extraction model. Composition images were related to green vegetation, senescent foliage and senescing cypress-tupelo forest, senescing Chinese tallow with red leaves ('red tallow'), and a composition image that only corresponded slightly to yellowing vegetation. These statistical and visual comparisons confirmed a successful portrayal of landscape features at the time of the Hyperion image collection. These landscape features were amalgamated in the Landsat Thematic Mapper (TM) pixel, thereby preventing the detection of Chinese tallow occurrences in the Landsat TM classification. With the occurrence in percentage of red tallow (as a surrogate for Chinese tallow) per pixel mapped, we were able to link dominant land covers generated with Landsat TM image data to Chinese tallow occurrences as a first step toward determining the sensitivity and susceptibility of various land covers to tallow establishment. Results suggested that the highest occurrences and widest distribution of red tallow were (1) apparent in disturbed or more open canopy woody wetland deciduous forests (including cypress-tupelo forests), upland woody land evergreen forests (dominantly pines and seedling plantations), and upland woody land deciduous and mixed forests; (2) scattered throughout the fallow fields or located along fence rows separating active and non-active cultivated and grazing fields, (3) found along levees lining the ubiquitous canals within the marsh and on the cheniers near the coastline; and (4) present within the coastal marsh located on the numerous topographic highs. ?? 2005 US Government.

International Journal of Remote Sensing↗

Climate refugia for Pinus spp. in topographic and bioclimatic environments of the Madrean sky islands of México and the United States

Climate refugia, or places where habitats are expected to remain relatively buffered from regional climate extremes, provide an important focus for science and conservation planning. Within high-priority, multi-jurisdictional landscapes like the Madrean sky islands of the United States and México, efforts to identify and manage climate refugia are hindered by the lack of high-quality and consistent transboundary datasets. To fill these data gaps, we assembled a bi-national field dataset ( n = 1416) for five pine species ( Pinus spp.) and used generalized boosted regression to model pine habitats in relation to topographic variability as a basis for identifying potential microrefugia at local scales in the context of current species’ distribution patterns. We developed additional models to quantify climatic refugial attributes using coarse scale bioclimatic variables and finer scale seasonal remote sensing indices. Terrain metrics including ruggedness, slope position, and aspect defined microrefugia for pines within elevation ranges preferred by each species. Response to bioclimatic variables indicated that small shifts in climate were important to some species (e.g., P. chihuahuana, P. strobiformis ), but others exhibited a broader tolerance (e.g., P. arizonica ). Response to seasonal climate was particularly important in modeling microrefugia for species with open canopy structure and where regular fires occur (e.g., P. engelmannii and P. chihuahuana ). Hotspots of microrefugia differed among species and were either limited to northern islands or occurred across central or southern latitudes. Mapping and validation of refugia and their ecological functions are necessary steps in developing regional conservation strategies that cross jurisdictional boundaries. A salient application will be incorporation of climate refugia in management of fire to restore and maintain pine ecology.

Arizona, Chihuahua, New Mexico, Sonora↗

Analyses of rocks and stream sediments of the Superstition Wilderness, Arizona

The geochemical investigation of the Superstition Wilderness, Maricopa, Pinal and Gila Counties, Arizona, consisted of the collection and analyses of 2269 samples. This included 1231 rocks and 1038 stream sediments. All samples were prepared and analyzed on location during two separate field seasons (fall of 1975 and 1976) by mobile laboratories of the U.S. Geological Survey. Sample localities and analytical results are listed in this report. Samples lie within the following U.S.G.S. topographic quadrangles: Goldfield, Mormon Flat Dam, Weavers Needle, Horse Mesa Dam, Iron Mountain, Pinyon Mountain, Haunted Canyon, and Two Bar Mountain. Locations for all samples are in Universal Transverse Mercator (UTM) coordinates, the X coordinate is the northing value, which ranges from 3,693,000 m to 3,720,000 m and the Y coordinate is the casting value, which ranges from 453,500 m to 500,000 m. Because of limitations of the computer program, the initial digit of the northing numbers has been dropped. Data of rocks are listed on Table 1 and stream sediments on Table 2. The analytical and geologic data were entered into a computer storage system (RASS II) by S. K. McDanal and retrievals were handled by T. M. Billings and George VanTrump. Geochemical sampling was carried out during geologic mapping by a U.S. Geological Survey field party consisting of D. W. Peterson, D. L. Gaskill, M. L. Sorenson, and W. E. Yeend, assisted by Kerwin Stark, N. H. Suneson, and G. D. Johnpeer. Analytical support was given by R. N. Babcock and D. G. Murrey.

Arizona↗

Reconnaissance of ground-water resources in the Eastern Coal Field Region, Kentucky

In the Eastern Coal Field region of Kentucky, water is obtained from consolidated sedimentary rocks ranging in age from Devonian to Pennsylvanian and from unconsolidated sediments of Quaternary age. About 95 percent of the area is underlain by shale, sandstone, and coal of Pennsylvanian age. Principal factors governing the availability of water in the region are depth, topographic location, and the lithology of the aquifer penetrated. In general, the yield of the well increases as the depth increases. Wells drilled in topographic lows, such as valleys, are likely to yield more water than wells drilled on topographic highs, such as hills. Sand and gravel, present in thick beds in the alluvium along the Ohio River, form the most productive aquifer in the Eastern Coal Field. Of the consolidated rocks in the region sandstone strata are the best aquifers chiefly because joints, openings along bedding planes, and intergranular pore spaces are best developed in them. Shale also supplies water to many wells in the region, chiefly from joints and openings along bedding planes. Coal constitutes a very small part of the sedimentary section, but it yields water from fractures to many wells. Limestone yields water readily from solution cavities developed along joint and bedding-plane openings. The availability of water in different parts of the region was determined chiefly by analyzing well data collected during the reconnaissance. The resulting water-availability maps, published as hydrologic investigations atlases (Price and others, 1961 a, b; Kilburn and others, 1961) were designed to be used in conjunction with this report. The maps were constructed by dividing the region into 5 physiographic areas, into 10 subareas based chiefly on lithologic facies, and, in the case of the Kanawha section, into 2 quality-of-water areas. The 5 physiographic areas are the Knobs, Mississippian Plateau, Cumberland Plateau section, Kanawha section, and Cumberland Mountain section. The 10 subareas are as follows: 1. The Chattanooga shale. This black shale yields only enough water for a minimum domestic supply-100 to 500 gpd (gallons per day). 2. Mississippian-Devonian rocks exposed along Pine Mountain. These rocks consist of shale, limestone, and sandstone. The limestone yields water to springs, and faulted limestone and sandstone lying below drainage may yield several hundred gallons per minute to wells. 3. Mississippian rocks exposed along the western margin of the region. These rocks consist of thick limestone underlain by shale. The limestone yields enough water for a modern domestic supply (more than 500 gpd) , and discharges as much as 100 gpm (gallons per minute) to springs. The shale yields only enough water for a minimum domestic supply. 4. Subarea 1 of the Lee formation of Pennsylvanian age. The thin shaly rocks of this subarea generally yield only enough water for a minimum domestic supply. 5. Subarea 2 of the Lee formation of Pennsylvanian age. This subarea is predominantly underlain by massive sandstones; it generally yields enough water for a modern domestic supply, and in some places, enough water for small public and industrial supplies. 6. Subarea 1 of the Breathitt and Conemaugh formations of Pennsylvanian age. Rocks in this subarea contain more shale than sandstone. Wells in this subarea range from adequate for a minimum domestic supply to adequate for a modern domestic supply. 7. Subarea 2 of the Breathitt formation of Pennsylvanian age and undifferentiated post-Lee Pennsylvanian rocks. Wells in this subarea yield enough water for a modern domestic supply, and in many places, enough water for small public and industrial supplies. 8. Alluvium along the Ohio River. Mostly composed of glacial outwash sand and gravel, the alluvium is reported to yield as much as 360 gpm to wells. 9. Alluvium along the Big Sandy River and lower reaches of its Tug and Levisa Forks. Where consisting mostly of sand,

Water Supply Paper↗

Hydraulic Characteristics of Bedrock Constrictions and Evaluation of One- and Two-Dimensional Models of Flood Flow on the Big Lost River at the Idaho National Engineering and Environmental Laboratory, Idaho

A 1.9-mile reach of the Big Lost River, between the Idaho National Engineering and Environmental Laboratory (INEEL) diversion dam and the Pioneer diversion structures, was investigated to evaluate the effects of streambed erosion and bedrock constrictions on model predictions of water-surface elevations. Two one-dimensional (1-D) models, a fixed-bed surface-water flow model (HEC-RAS) and a movable-bed surface-water flow and sediment-transport model (HEC-6), were used to evaluate these effects. The results of these models were compared to the results of a two-dimensional (2-D) fixed-bed model [Transient Inundation 2-Dimensional (TRIM2D)] that had previously been used to predict water-surface elevations for peak flows with sufficient stage and stream power to erode floodplain terrain features (Holocene inset terraces referred to as BLR#6 and BLR#8) dated at 300 to 500 years old, and an unmodified Pleistocene surface (referred to as the saddle area) dated at 10,000 years old; and to extend the period of record at the Big Lost River streamflow-gaging station near Arco for flood-frequency analyses. The extended record was used to estimate the magnitude of the 100-year flood and the magnitude of floods with return periods as long as 10,000 years. In most cases, the fixed-bed TRIM2D model simulated higher water-surface elevations, shallower flow depths, higher flow velocities, and higher stream powers than the fixed-bed HEC-RAS and movable-bed HEC-6 models for the same peak flows. The HEC-RAS model required flow increases of 83 percent [100 to 183 cubic meters per second (m3/s)], and 45 percent (100 to 145 m3/s) to match TRIM2D simulations of water-surface elevations at two paleoindicator sites that were used to determine peak flows (100 m3/s) with an estimated return period of 300 to 500 years; and an increase of 13 percent (150 to 169 m3/s) to match TRIM2D water-surface elevations at the saddle area that was used to establish the peak flow (150 m3/s) of a paleoflood with a return period of 10,000 years. A field survey of the saddle area, however, indicated that the elevation of the lowest point on the saddle area was 1.2 feet higher than indicated on the 2-ft contour map that was used in the TRIM2D model. Because of this elevation discrepancy, HEC-RAS model simulations indicated that a peak flow of at least 210 m3/s would be needed to initiate flow across the 10,000-year old Pleistocene surface. HEC-6 modeling results indicated that to compensate for the effects of streambed scour, additional flow increases would be needed to match HEC-RAS and TRIM2D water-surface elevations along the upper and middle reaches of the river, and to compensate for sediment deposition, a slight decrease in flows would be needed to match HEC-RAS water-surface elevations along the lower reach of the river. Differences in simulated water-surface elevations between the TRIM2D and the HEC-RAS and HEC-6 models are attributed primarily to differences in topographic relief and to differences in the channel and floodplain geometries used in these models. Topographic differences were sufficiently large that it was not possible to isolate the effects of these differences on simulated water-surface elevations from those attributable to the effects of supercritical flow, streambed scour, and sediment deposition.

Scientific Investigations Report↗

Detection and mapping of hydrothermally altered rocks in the vicinity of the Comstock Lode, Virginia Range, Nevada, using enhanced Landsat images

The Virginia Range, immediately southeast of Reno, Nev., consists mainly of flows, breccias, and turfs of Miocene age. Most of these volcanic rocks are of intermediate composition; rhyodacite is the most common rock type. Basalt, rhyolite and rhyolite tuff, and tuffaceous sedimentary rocks of Miocene and Pliocene age also cover substantial areas in the range. Pre-Tertiary metasedimentary, metavolcanic, and granitic rocks are exposed in scattered inliers, mostly along the southern and eastern margins of the range. Several large areas and many small areas within the volcanic pile were subjected to hydrothermal alteration during and after the period of intermediate volcanic activity. Economic precious metal mineralization is spatially and temporally associated with the hydrothermal alteration in several areas. The most important deposit is the Comstock Lode, which produced 192 million troy ounces of silver and 8.3 million troy ounces of gold from epithermal veins (Bonham, 1969). The hydrothermally altered rocks include silicified, advanced argillic, montmorillonite-bearing argillic, and propylitic types. The first three types typically contain pyrite, and some propylitic rocks contain pyrite as well. Supergene oxidation of these pyritic rocks produces limonitic bleached rocks. The term 'limonite,' as used here, refers to any combination of the minerals hematite, goethite, and Jarosite. Where vegetation cover is sparse to moderate, these limonitic rocks are readily identified on Landsat images enhanced by the color-ratio composite technique developed by Rowan and others (1974), so the altered areas can be mapped. About 30 percent tree cover (here mainly pinyon pine) is sufficient to change the spectral signature of individual picture elements (pixels) enough so that limonitic materials can no longer be uniquely identified. As in all other areas where this technique has been applied, limonitic unaltered rocks with intermediate to high albedos have the same appearance on the color-ratio composite as limonitic altered rocks. This problem represents the most important limitation to the use of enhanced Landsat images for detection and mapping of hydrothermally altered rocks. Reflectance spectra of altered and unaltered rocks taken in the field in the Virginia Range show that most altered rocks have a conspicuous absorption band near 2.2 ?m produced by clay minerals or alunite, whereas unaltered rocks have no features in this spectral region. Thus spectral information for selected bands in the 1.1-2.5 ?m region may allow discrimination between limonitic altered and limonitic unaltered rocks (Rowan and others, 1977; Abrams and others, 1977; Rowan and Abrams, 1978). Another potential limitation is loss of spectral information on slopes with low effective sun angle. Although a minor problem in the Virginia Range, loss of information sufficient to preclude identification of limonitic altered rocks occurs with effective sun angle lower than 20-25 degrees. Thus, even at moderate latitudes substantial parts of areas with high topographic relief may be lost to observation.

Open-File Report↗