Geology Reports⌕ Search

SEARCH · Geology Reports

Results for “Mining Geology”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,513 records · Page 84Linked to original sources

Metal loading assessment of a small mountainous sub-basin characterized by acid drainage -- Prospect Gulch, upper Animas River watershed, Colorado

strongly affected by natural acidity from pyrite weathering. Metal content in the water column is a composite of multiple sources affected by hydrologic, geologic, climatic, and anthropogenic conditions. Identifying sources of metals from various drainage areas was determined using a tracer injection approach and synoptic sampling during low flow conditions on September 29, 1999 to determine loads. The tracer data was interpreted in conjunction with detailed geologic mapping, topographic profiling, geochemical characterization, and the occurrence and distribution of trace metals to identify sources of ground-water inflows. For this highly mineralized sub-basin, we demonstrate that SO4, Al, and Fe load contributions from drainage areas that have experienced historical mining?although substantial?are relatively insignificant in comparison with SO4, Al, and Fe loads from areas experiencing natural weathering of highlyaltered, pyritic rocks. Regional weathering of acid-sulfate mineral assemblages produces moderately low pH waters elevated in SO4, Al, and Fe; but generally lacking in Cu, Cd, Ni, and Pb. Samples impacted by mining are also characterized by low pH and large concentrations of SO4, Al, and Fe; but contained elevated dissolved metals from ore-bearing vein minerals such as Cu, Zn, Cd, Ni, and Pb. Occurrences of dissolved trace metals were helpful in identifying ground-water sources and flow paths. For example, cadmium was greatest in inflows associated with drainage from inactive mine sites and absent in inflows that were unaffected by past mining activities and thus served as an important indicator of mining contamination for this environmental setting. The most heavily mine-impacted reach (PG153 to PG800), contributed 8% of the discharge, and 11%, 9%, and 12% of the total SO4, Al, and Fe loads in Prospect Gulch. The same reach yielded 59% and 37% of the total Cu and Zn loads for the subbasin. In contrast, the naturally acidic inflows from the Red Chemotroph iron spring yielded 39% of the discharge and 54%, 73%, and 87% of the SO4, Al, and Fe loads; but only 4% of the total Cu and 30% of the total Zn loads in Prospect Gulch. Base flow from the Prospect Gulch sub-basin contributes about 4.8 percent of the total discharge at the mouth of Cement Creek; compared with sampled instream loads of 1.8%, 8.8%, 15.9%, 28%, and 8.6% for SO4, Al, Fe, Cu and Zn, respectively. Water-shed scale remediation efforts targeted at reducing loads of SO4, Al, and Fe at inactive mine sites are likely to fail because the major sources of these constituents in Prospect Gulch are predominantly discharged from natural sources. Remediation goals aimed at reducing acidity and loads of Cu and other base metals, may succeed, however, because changes in pH and loads are disproportionately greater than increases in discharge over the same reach, and a substantial fraction of the metal loading is from mining-impacted reaches. Whether remediation of abandoned mines in Prospect Gulch can be successful depends on how goals are defined?that is, whether the objective is to reduce loads of SO4, Al, and Fe; or whether loads of Cu and other base metals and pH are targeted.

Open-File Report↗

Geochemical maps of stream sediments in central Colorado, from New Mexico to Wyoming

The U.S. Geological Survey has completed a series of geologic, mineral resource, and environmental assessment studies in the Rocky Mountains of central Colorado, from Leadville eastward to the range front and from New Mexico to the Wyoming border. Regional stream-sediment geochemical maps, useful for assessing mineral resources and environmental effects of historical mining activities, were produced as part of the study. The data portrayed in this 56-parameter portfolio of landscape geochemical maps serve as a geochemical baseline for the region, indicate element abundances characteristic of various lithologic terranes, and identify gross anthropogenic effects of historical mining. However, although reanalyzed in this study by modern, sensitive methods, the majority of the stream-sediment samples were collected in the 1970s. Thus, metal concentrations portrayed in these maps represent stream-sediment geochemistry at the time of collection.

Colorado↗

Mineral resource of the month: tellurium

The article offers information on tellerium, a rare and expensive metal. Tellerium is considered the 71st most abundant element in Earth's crust, along with platinum and palladium. The element belongs to the chalcogen chemical family, and is recovered as a byproduct of nonferrous metal mining. The global demand for tellerium has significantly increased due to the growth in solar cell production in the U.S. and Europe, and thermoplastics in China.

Earth↗

Geochemical characterization of groundwater discharging from springs north of the Grand Canyon, Arizona, 2009–2016

A geochemical study was conducted on 37 springs discharging from the Toroweap Formation, Coconino Sandstone, Hermit Formation, Supai Group, and Redwall Limestone north of the Grand Canyon near areas of breccia-pipe uranium mining. Baseline concentrations were established for the elements As, B, Li, Se, SiO 2 , Sr, Tl, U, and V. Three springs exceeded U.S. Environmental Protection Agency drinking water standards: Fence Spring for arsenic, Pigeon Spring for selenium and uranium, and Willow (Hack) Spring for selenium. The majority of the spring sites had uranium values of less than 10 micrograms per liter (μg/L), but six springs discharging from all of the geologic units studied that are located stratigraphically above the Redwall Limestone had uranium values greater than 10 μg/L (Cottonwood [Tuckup], Grama, Pigeon, Rock, and Willow [Hack and Snake Gulch] Springs). The geochemical characteristics of these six springs with elevated uranium include Ca-Mg-SO 4 water type, circumneutral pH, high specific conductance, correlation and multivariate associations between U, Mo, Sr, Se, Li, and Zn, low 87 Sr/ 86 Sr, low 234 U/ 238 U activity ratios (1.34–2.31), detectable tritium, and carbon isotopic interpretation indicating they may be a mixture of modern and pre-modern waters. Similar geochemical compositions of spring waters having elevated uranium concentrations are observed at sites located both near and away from sites of uranium-mining activities in the present study. Therefore, mining does not appear to explain the presence of elevated uranium concentrations in groundwater at the six springs noted above. The elevated uranium at the six previously mentioned springs may be influenced by iron mineralization associated with mineralized breccia pipe deposits. Six springs discharging from the Coconino Sandstone (Upper Jumpup, Little, Horse, and Slide Springs) and Redwall Limestone (Kanab and Side Canyon Springs) contained water with corrected radiocarbon ages as much as 9,300 years old. Of the springs discharging water with radiocarbon age, Kanab and Side Canyon Springs contain tritium of more than 1.3 picocuries per liter (pCi/L), indicating they may contain a component of modern water recharged after 1952. Springs containing high values of tritium (greater than 5.1 pCi/L), which may suggest a significant component of modern water, include Willow (Hack), Saddle Horse, Cottonwood (Tuckup), Hotel, Bitter, Unknown, Hole in the Wall, and Hanging Springs. Fence and Rider Springs, located on the eastern end of the study area near the Colorado River, have distinctly different geochemical compositions compared to the other springs of the study. Additionally, water from Fence Spring has the highest 87 Sr/ 86 Sr for samples analyzed from this study with a value greater than those known in sedimentary rocks from the region. Strontium isotope data likely indicate that water discharging at Fence Spring has interacted with Precambrian basement rocks. Rider Spring had the most depleted values of stable O and H isotopes indicating that recharge, if recent, occurred at higher elevations or was recharged during earlier, cooler-climate conditions.

Arizona↗

Reconnaissance study of the major and trace element content of bauxite deposits in the Arkansas bauxite region, Saline and Pulaski Counties, central Arkansas

The Arkansas bauxite district, which comprises about 275 square miles (710 square kilometers) of central Arkansas, produced an order of magnitude more bauxite and alumina than the other bauxite districts in the United States combined. Bauxite was mined in the region continuously from 1898 to 1982. These bauxites are laterite deposits, formed from intensive in-place weathering of the exposed surface of the Granite Mountain pluton, a Late Cretaceous batholith composed mainly of nepheline syenite and lesser amounts of syenite. Nepheline syenite was the aluminum source for the bauxite and clay deposits that blanket the pluton. The early Eocene continental sedimentary rocks that contain and overlie the bauxite deposits indicate that central Arkansas had a warm tropical environment during bauxite formation. Bauxite ores are the principal sources of aluminum. Some of the global bauxite deposits have been found to contain co-occurring metals that have essential applications in modern technologies. For example, bauxite is the largest global source of gallium (Ga), used in semiconductors, which is recovered as a byproduct of processing bauxite to recover alumina. Other critical metal commodities within some bauxites that reportedly have potential for byproduct recovery include niobium (Nb), scandium (Sc), and rare earth elements (REEs). Currently (2021), the United States is wholly dependent on imports for its supplies of bauxite for processing to produce alumina. The United States is also dependent on foreign sources of gallium, niobium, and scandium, as well for most of its domestic requirements of REEs. For these reasons, samples were collected from Arkansas bauxite deposits, associated clays, mill residue wastes (respectively referred to as red muds and black sands), and the parent nepheline syenite to determine their elemental content, with a particular focus on gallium, niobium, scandium, and REEs. Each sample was analyzed for 60 elements; these data and the methods used are published as a U.S. Geological Survey data release. The results indicate that, of the critical metals in bauxites, gallium is a potential byproduct from the central Arkansas bauxite deposits. The highest gallium concentrations occur in the raw bauxite ore, with an average concentration of 76 parts per million (ppm). Gallium partitions with alumina (the product) rather than into mine waste residues. Results indicate an average niobium content of 662 ppm in the Arkansas bauxite ores. Niobium progressively increases in concentration from parent syenite (247 ppm) to clays (315 ppm) and further from bauxite (662 ppm) to processed residues (1,075 ppm). Low concentrations of scandium were found in all samples, averaging 10 ppm or less in the parent rock (syenite), bauxite, clays, and processing residues. Modest concentrations of the light and heavy REEs were found in samples of bauxite ores, bauxitic clays and interbedded clays, syenite, and the residues of ore. The highest REE values were found in processed residues, with average concentrations of 613 ppm total light REEs and 130 ppm total heavy REEs. These concentrations suggest that additional processing to recover REEs is unlikely to be economic in the foreseeable future.

Arkansas↗

Geology and coal resources of the Stonewall-Tercio area, Las Animas County, Colorado

The Stonewall-Tercio area lies along the western edge of the Trinidad coal field, Colorado, a part of the large Raton Mesa region of Colorado and New Mexico. Coal of Upper Cretaceous and early Tertiary age in that region has been utilized extensively for coking and for domestic heating. Present mining operations are limited, but mining is possible throughout much of the field.

Colorado↗

Exploration for uranium-vanadium deposits by U.S. Geological Survey 1948-56 in western Disappointment Valley area, Slick Rock district, San Miguel County, Colorado

The western Disappointment Valley area is in San Miguel County, Colo., in the northeastern part of the Slick Rock district, (see location map). It covers an area of approximately 50 square miles in Tps. 43 and 44 N., Rs. 17, 18, and 19 W., New Mexico principal meridian. The mining camp of Slick Rock is in the western part of the area. On the northeast the area is bounded by Gypsum Valley; the other boundaries are arbitrarily drawn to delimit the area in which drilling was done.

Colorado↗

The Alaska Mineral Resource Assessment Program: Background information to accompany geologic and mineral-resource maps of the Cordova and Middleton Island quadrangles, southern Alaska

This report summarizes recent results of integrated geological, geochemical, and geophysical field and laboratory studies conducted by the U.S. Geological Survey in the Cordova and Middleton Island 1°x3° quadrangles of coastal southern Alaska. Published open-file reports and maps accompanied by descriptive and interpretative texts, tables, diagrams, and pertinent references provide background information for a mineral-resource assessment of the two quadrangles. Mines in the Cordova and Middleton Island quadrangles produced copper and byproduct gold and silver in the first three decades of the 20th century. The quadrangles may contain potentially significant undiscovered resources of precious and base metals (gold, silver, copper, zinc, and lead) in veins and massive sulfide deposits hosted by Cretaceous and Paleogene sedimentary and volcanic rocks. Resources of manganese also may be present in the Paleogene rocks; uranium resources may be present in Eocene granitic rocks; and placer gold may be present in beach sands near the mouth of the Copper River, in alluvial sands within the canyons of the Copper River, and in smaller alluvial deposits underlain by rocks of the Valdez Group. Significant coal resources are present in the Bering River area, but difficult access and structural complexities have discouraged development. Investigation of numerous oil and gas seeps near Katalla in the eastern part of the area led to the discovery of a small, shallow field from which oil was produced between 1902 and 1933. The field has been inactive since, and subsequent exploration and drilling onshore near Katalla in the 1960's and offshore near Middleton Island on the outer continental shelf in the 1970's and 1980's was not successful.

Alaska↗

Geology of the Plumtree area, Spruce Pine district, North Carolina

This report describes the results of study and geologic mapping (1:12,000) in the 70-square-mile Plumtree area in the northeastern part of the Spruce Pine pegmatite district, on the Blue Ridge upland in western North Carolina. The district has been the chief domestic source of feldspar and sheet mica. The mining belt just west of the Blue Ridge Front trends northeast and is 25 miles long and 10 miles wide. The center of the Plumtree area lies 10 miles northeast of Spruce Pine pegmatite district, on the Blue Ridge upland in western North Carolina. The district has been the chief domestic source of feldspar and sheet mica. The mining belt just west of the Blue Ridge Front trends northeast and is 25 miles long and 10 miles wide. The center of the Plumtree area lies 10 miles northeast of Spruce Pine and includes parts of Mitchell and Avery Counties shown on the portions of the 7.5-minute Spruce Pine, Linville Falls, Newland, North Carolina, and Carvers Gap, North Carolina and Tennessee quadrangle. The topography varies from rugged mountains to rounded or flat topped hills near the entrenched, meandering master streams. Old erosion surfaces are approximately 600,1,100, 1,500, and 2,500 feet above the present master stream level. The area is in late youth or early maturity after rejuvenation.. The regionally metamorphosed rocks of the amophibolite facies form three mappable units: mica gneiss, mica schist, and hornblende rock. These rocks, perhaps of Precambrian age, are intimately interlayered with thicknesses of the individual layers ranging from less than one inch to several tons of feet. Field relationships and chemical data suggest that the mica (Carolina-type) rocks were derived from sandstones, graywackes, and shales and that the hornblende-rich (Roan-type) layers were derived from impure carbonate rocks. The igneous rocks include alaskite and associated pegmatite of early Paleozoic age (?), dunite and associated soapstone of a prepegmatite age, and a few diabasic dikes of post-pegmatite age (Triassic?). The alaskite and pegmatite have similar bulk compositions, notably low in iron (0.3 percent). The major constituents in order of decreasing abundance are plagioclase, perthitic microcline, quartz, and muncovite. All of these minerals, as well as clay deposits derived from the weathering of alaskite under old terraces, have economic value. The zoned pegmatites contain fewer zones which are less complex mineralogically than those in the pegmatites of many other areas. These essentially unmetamorphosed bodies were intruded approximately at the peak of the regional metamorphism. Their emplacement was controlled by local structure and rock type. The source of this igneous material may have been the mobilized portions of the Cranberry gneiss which underlies the area. The dunite bodies were intruded early in the metamorphic cycle. The bodies are commonly zoned: from the wall rock inwards (1) talc-antrophyllite-serpentine fringe, (3) serpentinized dunite, (3) granular olivine core. Dunite, chromite, vermiculite, and anthophyllite are the major economic commodities. Extensive hydrothermal alteration of dunite bodies produced soapstone. The area is the northeast end of a southwest plunging synclinorium about 20 miles wide with the steeper limb on the northwest side. There are three structural zones: zone I on the northwest is characterized by the northeast-trending isoclinal folds with steep southeast dips; zone II on the southwest includes an area of rocks with low and variable dip; zone III is the complex central core. In the extreme northeast zones I and II have an indistinct boundary where they coalesce along the rim of the synclinorium. Six stratigraphic units are exposed totaling approximately 10,500 feet of metamorphic rocks. Small scale structural features include a foliation, and a lineation in the planes of the foliation. Minor folding reflects the trends of the major structures. There are randomly orient

Open-File Report↗

Chemical analysis of 45 Maryland coal samples

This report is part of a continuing program by the U.S. Geological Survey, State Geological Surveys, and the Coal Analysis Section of the U.S. Department of Energy to provide chemical data on the composition of important coal beds of the United States of America. Such data are useful in determining the economic value of a coal, environmental effects of coal mining and coal use, and the adaptability of a coal to cleaning and to other technological processes of coal treatment and usage.

Maryland↗

Hydrology of Area 61, Northern Great Plains and Rocky Mountain Coal Provinces, Colorado and New Mexico

Area 61 is located on the Colorado-New Mexico boundary in Huerfano and Las Animas Counties, Colorado, and Colfax County, New Mexico, and includes the Raton Mesa coal region. The 5 ,900-square-mile area is an asymmetrical structural trough bounded by the Rocky Mountains on the west and the Great Plains on the east. The area is drained by the Huerfano, Apishapa, Purgatoire, and Canadian Rivers (and their tributaries), all tributary to the Arkansas River. The principal coal-bearing formations are the Vermejo Formation of Late Cretaceous age and the Raton Formation of Late Cretaceous and Paleocene age. Much of the coal in the area is of coking quality, important to the metallurgical industry. Topographic relief in the area is greater than 8,700 feet, and this influences the climate which in turn affects the runoff pattern of area streams. Summer thunderstorms often result in flash floods. Virtually all geologic units in the region yield water. Depth to ground water ranges from land surface to 400 feet. Surface and ground water in the area contain mostly bicarbonate and sulfate ions; locally in the ground water, chloride ions predominate. Potential hydrologic problems associated with surface coal mining in the area are water-quality degradation, water-table decline, and increased erosion and sedimentation.

Open-File Report↗

Apache Trail uranium prospect, White Signal district, Grant County, New Mexico

The Apache Trail uranium prospect in the White Signal district, Grant County. N. Mex., was mapped by the Geological Survey in May 1950. Pre-Cambrian granite is cut by a diabase dike and a parallel quartz-hematite vein, both of which strike easterly and dip 60 to 65 degrees north. Small quantities of copper carbonates and bismuth-gold ore have been mined. The quartz-hematite vein is moderately radioactive and, although no uranium minerals were seen, two samples contained about 0.01 percent uranium. The diabase dike locally contains torbernite. Two samples of diabase contained about 0.04 percent uranium.

New Mexico↗

Hydrology of Area 61, Northern Great Plains and Rocky Mountain Coal Provinces, Colorado and New Mexico

Area 61 is located on the Colorado-New Mexico boundary in Huerfano and Las Animas Counties, Colorado, and Colfax County, New Mexico, and includes the Raton Mesa coal region. The 5 ,900-square-mile area is an asymmetrical structural trough bounded by the Rocky Mountains on the west and the Great Plains on the east. The area is drained by the Huerfano, Apishapa, Purgatoire, and Canadian Rivers (and their tributaries), all tributary to the Arkansas River. The principal coal-bearing formations are the Vermejo Formation of Late Cretaceous age and the Raton Formation of Late Cretaceous and Paleocene age. Much of the coal in the area is of coking quality, important to the metallurgical industry. Topographic relief in the area is greater than 8,700 feet, and this influences the climate which in turn affects the runoff pattern of area streams. Summer thunderstorms often result in flash floods. Virtually all geologic units in the region yield water. Depth to ground water ranges from land surface to 400 feet. Surface and ground water in the area contain mostly bicarbonate and sulfate ions; locally in the ground water, chloride ions predominate. Potential hydrologic problems associated with surface coal mining in the area are water-quality degradation, water-table decline, and increased erosion and sedimentation. (USGS)

Water-Resources Investigations Report↗

Characterizing sedimentary organic carbon in a hydrothermal spreading center, the Escanaba Trough

Sediments in critical marine mineral environments are of wide importance due to their preservation of both marine minerals and organic carbon (OC) stocks. However, OC storage and cycling is often overlooked in mineral system studies. This work characterizes sedimentary OC within the Escanaba Trough, a hydrothermal sulfide system off the coast of northern California. By utilizing ROV-based push coring, we collected sediments near and far from high temperature, low temperature, and inactive vents. We applied a multipronged organic geochemical approach, measuring bulk sediment, OC fractions of varying labilities, and biomarkers to tease apart the storage, source, and cycling of OC within this complex system. In contrast to past work indicating a primarily terrestrial source to deeper, Pleistocene sediments, our results suggest a primarily marine source in surface sediments at least 50 m away from active venting. Near active venting, we see evidence of locally produced chemosynthetic OC in addition to the background marine source. This chemosynthetic OC appears to be rapidly remineralized and supports more complex deep-sea food webs compared to hemipelagic sites. Still, the greatest contribution of labile OC was observed at inactive vent sites, which we suggest is due to hydrothermal fluid alteration of more labile OC at actively venting sites. Depending on fluid temperature, hydrothermally altered OC is either preserved in the sediments as petroleum or migrated with fluid flow. Considering inactive sites are those most likely to be targeted by potential mining, we suggest additional studies could verify if these results apply at other sedimented seafloor massive sulfide systems.

California↗

Trace element emissions from spontaneous combustion of gob piles in coal mines, Shanxi, China

The emissions of potentially hazardous trace elements from spontaneous combustion of gob piles from coal mining in Shanxi Province, China, have been studied. More than ninety samples of solid waste from gob piles in Shanxi were collected and the contents of twenty potentially hazardous trace elements (Be, F, V, Cr, Mn, Co, Ni, Cu, Zn, As, Se, Mo, Cd, Sn, Sb, Hg, Tl, Pb, Th, and U) in these samples were determined. Trace element contents in solid waste samples showed wide ranges. As compared with the upper continental crust, the solid waste samples are significantly enriched in Se (20x) and Tl (12x) and are moderately enriched in F, As, Mo, Sn, Sb, Hg, Th, and U (2-5x). The solid waste samples are depleted in V, Cr, Mn, Co, Ni, Cu, and Zn. The solid waste samples are enriched in F, V, Mn, Cr, Co, Ni, Cu, Zn, Sb, Th, and U as compared with the Shanxi coals. Most trace elements are higher in the clinker than in the unburnt solid waste except F, Sn, and Hg. Trace element abundances are related to the ash content and composition of the samples. The content of F is negatively correlated with the ash content, while Pb is positively correlated with the ash. The concentrations of As, Mn, Zn, and Cd are highly positively correlated with Fe2O3 in the solid waste. The As content increases with increasing sulfur content in the solid waste. The trace element emissions are calculated for mass balance. The emission factors of trace elements during the spontaneous combustion of the gobs are determined and the trace element concentrations in the flue gas from the spontaneous combustion of solid waste are calculated. More than a half of F, Se, Hg and Pb are released to the atmosphere during spontaneous combustion. Some trace element concentrations in flue gas are higher than the national emission standards. Thus, gob piles from coal mining pose a serious environmental problem. ?? 2007 Elsevier B.V. All rights reserved.

International Journal of Coal Geology↗

Pleistocene apparent ages by U-Pb isotope and U-series methods for uranium ore in Dakota Sandstone near Gallup, New Mexico

Radiometric dates of a high-grade uranium ore from the Hogback No. 4 mine in Dakota Sandstone near Gallup, N. Mex., indicate a late Pleistocene age of mineralization. The 206 Pb/ 238 U and 207 Pb/ 235 U apparent ages of about 70 000 yr and 100000 yr, respectively, are discordant, but are in broad agreement with the discordant 230 Th/ 238 U and 231 Pa/ 235 U apparent ages of 130000 yr and 78000 yr, respectively. Although it is not clear how the analyzed sample relates to the main period of mineralization at this mine, these dates are consistent with previous age limits suggested for Dakota Sandstone uranium-ores.

New Mexico↗

Reconnaissance geology of the Sabkhat Muraysis quadrangle, Kingdom of Saudi Arabia

The Sabkhat Muraysis quadrangle .covers an area of 2843 sq km in the central part of the Kingdom of Saudi Arabia. In the northwestern quarter of the area Precambrian rocks are exposed. They are overlain toward the .south and east by sedimentary formations of Permian and younger age. Four main units of Precambrian .rocks were identified in this area. From oldest to youngest they are: hornblende-biotite granite gneiss; amphibolite and rhyolite of the Halaban Group; graywacke and chlorite-sericite schist of the Bi'r Khountina Group; and biotite-hornblende granite, The hornblende-biotite granite gneiss unit and the biotite-hornblende granite .unit are both poorly exposed and largely covered by veneers of sand, Owing to these factors the boundaries between the granitic, rocks are obscure, Much of what is shown as hornblende-biotite granite gneiss may actually be biotite-hornblende granite. The Halaban Group is represented by an older amphibolite unit called the Umm Mushraha Formation and by a younger rhyolite unit., called the Wadi al Jifr Formation. Layered and msslve components in the Umm Mushraha Formation represent metamorphosed .andesite and graywacke, ,and metamorphosed diorite., gabbro, and pyroxenite. The Wadi al Jifr Formation consists of virtually unmetamorphosed to strongly sheared and metamorphosed rhyolite, rhyolite porphyry, and rhyolite tuff which at many places has been metamorphosed to quartz-sericite schist and biotite-muscovite schist. These schists retain porphyroclasts of blue quartz which also form conspicuous phenocrysts in the unsheared rhyolite. Locally, the sheared rhyolite ha s been hydrothermally altered resulting in the formation of quartz-chlorite-ankerite veins and a sparse impregnation of pyrite. The Bi'r Khountina Group consists of a unit of graywacke and argillite with interbedded andesite that is metamorphosed to chlorite-sericite schist near the contacts of intrusive biottte-hornblende granite. This .unit is-called the Abu Sawarir Formation. It is Intruded by masslve gabbro and pyroxenite. No ancient mines or old prospects were found in the Precambrian part of the quadrangle. Three alteration zones in rhyolite near the northwestern corner of the quadrangle tend to have threshold amounts of molybdenum and tungsten, but they have only background amounts of the base metals and silver. Pyrite is more common in the altered rhyolite than in adjacent rocks. Geological mapping plus and electromagnetic surveys of this area are recommended to explore for sulfide minerals.

Open-File Report↗

Rare earth elements in sedimentary phosphate deposits: Solution to the global REE crisis?

The critical role of rare earth elements (REEs), particularly heavy REEs (HREEs), in high-tech industries has created a surge in demand that is quickly outstripping known global supply and has triggered a worldwide scramble to discover new sources. The chemical analysis of 23 sedimentary phosphate deposits (phosphorites) in the United States demonstrates that they are significantly enriched in REEs. Leaching experiments using dilute H 2 SO 4 and HCl, extracted nearly 100% of their total REE content and show that the extraction of REEs from phosphorites is not subject to the many technological and environmental challenges that vex the exploitation of many identified REE deposits. Our data suggest that phosphate rock currently mined in the United States has the potential to produce a significant proportion of the world's REE demand as a byproduct. Importantly, the size and concentration of HREEs in some unmined phosphorites dwarf the world's richest REE deposits. Secular variation in phosphate REE contents identifies geologic time periods favorable for the formation of currently unrecognized high-REE phosphates. The extraordinary endowment, combined with the ease of REE extraction, indicates that such phosphorites might be considered as a primary source of REEs with the potential to resolve the global REE (particularly for HREE) supply shortage.

Gondwana Research↗