SEARCH · Geology Reports

Results for “Northwest Geology”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,459 records · Page 81Linked to original sources

USGS2022

Oklahoma and Landsat

Oklahoma benefits from a varied landscape abundant in resources. Mountains, grasslands, reservoirs, rivers, fields, and forests offer employment and enjoyment in a State that epitomizes the transition from north to south and east to west. Wheat grows in northern Oklahoma; cotton grows in the south. Wetter deciduous forest lands in the southeast contrast with drier mesas in the northwest. Among the many lakes and reservoirs, the Great Salt Plains Lake on the Arkansas River has thousands of acres of salt flats with unique hourglass-shaped selenite crystals. Grassland and grazing permeate the Sooner State, which is the second largest cattle producer in the country. Oil, natural gas, and coal have long played a key role in Oklahoma’s economy and energy industry, whereas wind farms in western Oklahoma are a more recent addition. The Landsat series of Earth observation satellites has allowed analysts to search for oil in Oklahoma from hundreds of miles above the Earth. The satellite program also helps Oklahoma’s agriculture industry keep an eye on the condition of crops and grazing land. Here are just a few ways Landsat has benefited Oklahoma.

Oklahoma↗

USGS2004

Influence of northwest Pacific productivity on North Pacific Intermediate Water oxygen concentrations during the Bølling-Ållerød interval (14.7-12.9 ka)

Elevated productivity in the northwest Pacific is suggested as a new possible control driving past intervals of low-O 2 intermediate water along the western continental margin of North America. According to this mechanism, O 2 consumption would occur near the site of formation of North Pacific Intermediate Water (NPIW), due to increased respiration of organic carbon in response to a high-productivity event. Evidence is provided for such a productivity increase during the Bølling-Ållerød interval (14.7–12.9 ka), a time when laminated sediments were deposited along the northern California margin. By this mechanism, low-O 2 events in intermediate waters off the western North American margin could occur without significant changes in the rate of NPIW ventilation.

Geology↗

USGS2001

Interglacial theme and variations: 500 k.y. of orbital forcing and associated responses from the terrestrial and marine biosphere, U.S. Pacific Northwest

Sediments collected off northern California by Ocean Drilling Program Leg 167 contain time series that show strong, orbitally driven insolation forcing of surface oceanographic conditions. Orbital forcing caused a strong response in the distribution of major terrestrial vegetation but a less predictable response for primary productivity offshore. Terrestrial vegetation responded primarily to regional sea surface temperature (SST). Coastal ocean productivity appears highest when SST is moderately high, not during peak interglacial conditions nor during insolation maxima. When individual interglacial intervals are examined closely, each has a different signature. Two of six interglacials (MIS [marine isotope stage] 5 and MIS 11) have higher SST than modern conditions, but each elicits a different response from the terrestrial and marine communities. The type of vegetation and the strength of upwelling vary between interglacials, depending on the relative strength of factors that drive the warming, including insolation, ice-cap size, and level of greenhouse gases.

California↗

USGS2013

The giant Pebble Cu-Au-Mo deposit and surrounding region, southwest Alaska: Introduction

The Pebble deposit is located about 320 km southwest of and 27 km northwest of the village of Iliamna in Alaska (Fig. 1A). It is one of the largest porphyry deposits in terms of contained Cu (Fig. 2A) and it has the largest Au endowment of any porphyry deposit in the world (Fig. 2B). The deposit comprises the Pebble West and Pebble East zones that represent two coeval hydrothermal centers within a single system (Lang et al., 2013). Together the measured and indicated resources total 5,942 million metric tons (Mt) at 0.42% Cu, 0.35 g/t Au, and 250 ppm Mo with an inferred resource of 4,835 Mt at 0.24% Cu, 0.26 g/t Au, and 215 ppm Mo. In addition, the deposit contains significant concentrations of Ag, Pd, and Re (Northern Dynasty Minerals, 2011).

Alaska↗

USGS2007

Arc-parallel extension and fluid flow in an ancient accretionary wedge: The San Juan Islands, Washington

Structural analysis of the Lopez Structural Complex, a major Late Cretaceous terrane-bounding fault zone in the San Juan thrust system, reveals a sequence of events that provides insight into accretionary wedge mechanics and regional tectonics. After formation of regional ductile flattening and shear-related fabrics, the area was crosscut by brittle structures including: (1) southwest-vergent thrusts, (2) extension veins and normal faults related to northwest-southeast extension, and (3) conjugate strike-slip structures that record northwest-southeast extension and northeast-southwest shortening. Aragonite-bearing veins are associated with thrust and normal faults, but only rarely with strike-slip faults. High-pressure, low-temperature (HP-LT) minerals constrain the conditions for brittle deformation to ???20 km and <250 ??C. The presence of similar structures elsewhere indicates that the brittle structural sequence is typical of the San Juan nappes. Sustained HP-LT conditions are possible only if structures formed in an accretionary prism during active subduction, which suggests that these brittle structures record internal wedge deformation at depth and early during uplift of the San Juan nappes. The structures are consistent with orogen-normal shortening and vertical thickening followed by vertical thinning and along-strike extension. The kinematic evolution may be related initially to changes in wedge strength, followed by response to overthickening of the wedge in an unbuttressed, obliquely convergent setting. The change in vein mineralogy indicates that exhumation occurred prior to the strike-slip event. The pressure and temperature conditions and spatial and temporal extent of small faults associated with fluid flow suggest a link between these structures and the silent earthquake process. ?? 2007 Geological Society of America.

Geological Society of America Bulletin↗

USGS2025

Estimated average annualized tsunami losses for the United States

Tsunami hazards are substantial threats to coastal communities across the United States (U.S.) and its territories. U.S. states and territories collaborate through the National Tsunami Hazard Mitigation Program (NTHMP) to develop their own tsunami-hazard information for outreach and evacuation planning. An effort to curate this tsunami-hazard information to support comprehensive risk analysis at the national level has not yet been completed. In support of this effort, the Federal Emergency Management Agency (FEMA) collaborated with the NTHMP, the National Oceanic and Atmospheric Administration (NOAA) and the U.S. Geological Survey (USGS) starting in 2023. This collaboration included the collection and analysis of existing tsunami hazard data and methods in the U.S. Tsunami subject matter experts identified and selected scientifically defensible methods for estimating the risks to buildings and populations in coastal communities. These efforts may support decision making regarding resilience policies, priorities, strategies and funding levels. Tsunamis can be triggered by earthquakes, subaerial or submarine landslides, volcanic eruptions, glacial calving, near-earth objects, weather or other events. These events can cause severe destruction, injuries, and loss of life due to powerful currents and flooding. Tsunamis pose a substantial threat to the western United States and all U.S. territories, as described below. ■ Hawaii is threatened by distant tsunamis due to its central location in the Pacific Ocean basin and has a history of local events. ■ Alaska, particularly the Aleutian Islands, faces local tsunami threats due to proximity to the Alaska-Aleutian Subduction Zone, as well as distant tsunamis from around the Pacific Ocean basin. ■ The western coast of the U.S. is threatened by distant tsunamis from around the Pacific Ocean basin and local source tsunamis from earthquakes generated within the Cascadia Subduction Zone in the Pacific Northwest. ■ American Samoa faces local tsunami threats from earthquakes generated in the nearby Tonga Trench, as well as distant tsunami threats. ■ Guam and the Commonwealth of the Northern Mariana Islands are threatened by local tsunamis from the nearby Mariana Subduction Zone, as well as distant sources from around the Pacific Ocean Basin. ■ Puerto Rico and the United States Virgin Islands are threatened by multiple local and distant tsunami sources, such as the Puerto Rico Trench (PRT), given their location in the complex seismic region of the Caribbean Sea. Several historical events stand out because of their catastrophic impacts. ■ In the Pacific Northwest, the 1700 Cascadia earthquake caused a tsunami that affected coastal Native American communities, though the extent of the damage is not fully documented (Ludwin, et al., 2005). ■ In Puerto Rico, the 1918 earthquake triggered a tsunami that caused $77 million in damage in 2022 dollars and 116 fatalities, primarily along the western coast (Coffman et al., 1982). ■ The 1946 Aleutian Islands earthquake triggered a massive tsunami that devastated Hilo, Hawaii, killing 158 people and resulting in approximately $375 million in damage (adjusted to 2022 dollars) (Fisher et al., 2023). ■ The 1964 Alaska earthquake (M 9.2) generated tsunamis that caused severe destruction in some communities across Alaska, Oregon, and California. This disaster led to a total of 124 fatalities and approximately $2.9 billion in property damage (adjusted to 2022 dollars) (Brocher et al., 2014) (Alaska Science Center, 2024). ■ In American Samoa, a tsunami generated by the 2009 Samoa earthquake (Mw 8.1) caused widespread devastation, resulting in 34 confirmed fatalities (Apatu et al., 2013) and economic losses exceeding $160 million (adjusted to 2022 dollars) (DHS, 2011). More recent events, including the 2010 Chile earthquake, the 2011 Japan earthquake, and the 2022 Tonga volcanic eruption, resulted in millions of dollars in damage to numerous ports and harbors in the U.S. South Pacific territories, Hawaii, and along the west coast of the U.S. (Lynett, et al., 2022) (Wilson, et al., 2013). Since these events, the expansion of the built environment in lowlying areas along the coast has increased the exposure of buildings and people, thereby further escalating community risk from tsunamis. This report provides a comprehensive national assessment of earthquake-generated tsunami risk. It does not include impacts from tsunamis generated by landslides, volcanic eruptions, glacial calving, near-earth objects, weather, or other events. This study is based on the best available hazard data from the U.S. Pacific Coast (California, Oregon and Washington), Alaska, Hawaii, U.S. Pacific Territories (American Samoa, Guam and Commonwealth of the Northern Mariana Islands) and Caribbean Territories (Puerto Rico and United States Virgin Islands). Tsunami risks associated with states along the East Coast, Gulf Coast, and Great Lakes are not included in this study because Hazus 6.1 software (FEMA 2024a) does not currently include the ability to analyze tsunami risk in those states. Once modeling capabilities and tsunami hazard data become available for additional states, FEMA may incorporate these data into future editions of this study.

Alaska, California, Hawaii Oregon, Washington↗

USGS2009

Selected ground-water-quality data in Pennsylvania - 1979-2006

This study, by the U.S. Geological Survey (USGS) in cooperation with the Pennsylvania Department of Environmental Protection (PADEP), provides a compilation of ground-water-quality data for a 28-year period (January 1, 1979, through December 31, 2006) based on water samples from wells and springs. The data are from 14 source agencies or programs—Borough of Carroll Valley, Chester County Health Department, Montgomery County Health Department, Pennsylvania Department of Agriculture, Pennsylvania Department of Environmental Protection 2002 Pennsylvania Water-Quality Assessment, Pennsylvania Department of Environmental Protection Agency Act 537 Sewage Facilities Program, Pennsylvania Department of Environmental Protection-Ambient and Fixed Station Network, Pennsylvania Department of Environmental Protection–North-Central Region, Pennsylvania Department of Environmental Protection–South-Central Region, Pennsylvania Drinking Water Information System, Pennsylvania Topographic and Geologic Survey, Susquehanna River Basin Commission, U.S. Environmental Protection Agency, and the U.S. Geological Survey. The ground-water-quality data from the different source agencies or programs varied in type and number of analyses; however, the analyses are represented by 11 major analyte groups: antibiotics, major ions, microorganisms (bacteria, viruses, and other microorganisms), minor ions (including trace elements), nutrients (predominantly nitrate and nitrite as nitrogen), pesticides, pharmaceuticals, radiochemicals (predominantly radon or radium), volatiles (volatile organic compounds), wastewater compounds, and water characteristics (field measurements, predominantly field pH, field specific conductance, and hardness). For the USGS and the PADEP–North-Central Region, the pesticide analyte group was broken down into fungicides, herbicides, and insecticides. Summary maps show the areal distribution of wells and springs with ground-water-quality data statewide by source agency or program. Summary data tables by source agency or program provide information on the number of wells and springs and samples collected for each of the 35 watersheds and analyte groups. The number of wells and springs sampled for ground-water-quality data varies considerably across Pennsylvania. Of the 24,772 wells and springs sampled, the greatest concentration of wells and springs is in the southeast (Berks, Bucks, Chester, Delaware, Lancaster, Montgomery, and Philadelphia Counties) and in the northwest (Erie County). The number of wells and springs sampled is relatively sparse in north-central (Cameron, Elk, Forest, McKean, Potter, and Warren Counties) Pennsylvania. Little to no data are available for approximately one-fourth of the state. Nutrients and water characteristics were the most frequently sampled major analyte groups—43,025 and 30,583 samples, respectively. Minor ions and major ions were the next most frequently sampled major analyte groups–26,972 and 13,115 samples, respectively. For the remaining 10 major analyte groups, the number of samples collected ranged from a low of 24 samples (antibiotic compounds) to a high of approximately 4,674 samples (microorganisms). The number of samples that exceeded a maximum contaminant level (MCL) or secondary maximum contaminant level (SMCL) by major analyte group also varied. Of the 4,674 samples in the microorganism analyte group, 50.2 percent had water that exceeded an MCL. Of the 4,528 samples collected and analyzed for volatile organic compounds, 23.5 percent exceeded an MCL. Other major analyte groups that frequently exceeded MCLs or SMCLs included major ions (18,343 samples and a 27.7 percent exceedence), minor ions (26,972 samples, 44.7 percent exceedence), pesticides (4,868 samples, 0.7 percent exceedence), water characteristics (30,583 samples, 19.3 percent exceedence), and radiochemicals (1,866 samples, 9.6 percent exceedence). Samples collected and analyzed for antibiotics (24 samples), fungicides (1,273 samples), herbicides (1,470 samples), insecticides (1,424 samples), nutrients (43,025 samples), pharmaceuticals (28 samples), and wastewater compounds (328 samples) had the lowest exceedences of 0.0, 2.4, 1.2, <1.0, 8.3, 0.0, and <1.0 percent, respectively.

Pennsylvania↗

USGS2010

Implementation and Evaluation of the Streamflow Statistics (StreamStats) Web Application for Computing Basin Characteristics and Flood Peaks in Illinois

Illinois StreamStats (ILSS) is a Web-based application for computing selected basin characteristics and flood-peak quantiles based on the most recently (2010) published (Soong and others, 2004) regional flood-frequency equations at any rural stream location in Illinois. Limited streamflow statistics including general statistics, flow durations, and base flows also are available for U.S. Geological Survey (USGS) streamflow-gaging stations. ILSS can be accessed on the Web at http://streamstats.usgs.gov/ by selecting the State Applications hyperlink and choosing Illinois from the pull-down menu. ILSS was implemented for Illinois by obtaining and projecting ancillary geographic information system (GIS) coverages; populating the StreamStats database with streamflow-gaging station data; hydroprocessing the 30-meter digital elevation model (DEM) for Illinois to conform to streams represented in the National Hydrographic Dataset 1:100,000 stream coverage; and customizing the Web-based Extensible Markup Language (XML) programs for computing basin characteristics for Illinois. The basin characteristics computed by ILSS then were compared to the basin characteristics used in the published study, and adjustments were applied to the XML algorithms for slope and basin length. Testing of ILSS was accomplished by comparing flood quantiles computed by ILSS at a an approximately random sample of 170 streamflow-gaging stations computed by ILSS with the published flood quantile estimates. Differences between the log-transformed flood quantiles were not statistically significant at the 95-percent confidence level for the State as a whole, nor by the regions determined by each equation, except for region 1, in the northwest corner of the State. In region 1, the average difference in flood quantile estimates ranged from 3.76 percent for the 2-year flood quantile to 4.27 percent for the 500-year flood quantile. The total number of stations in region 1 was small (21) and the mean difference is not large (less than one-tenth of the average prediction error for the regression-equation estimates). The sensitivity of the flood-quantile estimates to differences in the computed basin characteristics are determined and presented in tables. A test of usage consistency was conducted by having at least 7 new users compute flood quantile estimates at 27 locations. The average maximum deviation of the estimate from the mode value at each site was 1.31 percent after four mislocated sites were removed. A comparison of manual 100-year flood-quantile computations with ILSS at 34 sites indicated no statistically significant difference. ILSS appears to be an accurate, reliable, and effective tool for flood-quantile estimates.

Scientific Investigations Report↗

USGS1985

Geology and geochronology of granitoid and metamorphic rocks of late Archean age in northwestern Wisconsin

Granitoid rocks of the Puritan Quartz Monzonite and associated biotite gneiss and amphibolite in northwestern Wisconsin compose the southwestern part of the Puritan batholith of Late Archean age. They differ from rocks in the Michigan segment of the batholith in having been deformed by brittle-ductile deformation and partly recrystallized during shearing accompanying development of the midcontinent rift system of Keweenawan (Middle Proterozoic) age. Granitoid rocks ranging in composition from granite to tonalite are dominant in the Wisconsin part of the batholith. To the north of the Mineral Lake fault zone, they are massive to weakly foliated and dominantly of granite composition, whereas south of the fault zone they are more strongly foliated and mainly of tonalite composition. Massive granite, leucogranite, and granite pegmatite cut the dominant granitoid rocks. Intercalated with the granitoid rocks in small to large conformable bodies are biotite gneiss, amphibolite, and local tonalite gneiss. Metagabbro dikes of probable Early Proterozoic age as much as 15 m thick cut the Archean rocks. Rubidium-strontium whole-rock data indicate a Late Archean age for the granitoids and gneisses, but data points are scattered and do not define a single isochron. Zircon from two samples of tonalitic gneiss for uranium-thorium-Iead dating define a single chord on a concordia diagram, establishing an age of 2,735?16 m.y. The lower intercept age of 1,052?70 m.y. is in close agreement with rubidium-strontium and potassium-argon biotite ages from the gneisses. Two episodes of deformation and metamorphism are recorded in the Archean rocks. Deformation during the Late Archean produced a steep west-northwest-oriented foliation and gently plunging fold axes and was accompanied by low amphibolite-facies metamorphism of the bedded rocks. A younger deformation resulting from largely brittle fracture was accompanied by retrogressive metamorphism; this deformation is most evident adjacent to the Mineral Lake fault and took place during Keweenawan rifting about 1,050 m.y. ago. The Mineral Lake fault is one of several northwest-trending faults in the Lake Superior region that originated in the Late Archean and were reactivated intermittently during the Proterozoic, including Keweenawan time. The faults dominantly have right-lateral displacements. The Archean rocks of the Puritan batholith exposed in northwestern Wisconsin compose part of the greenstone-granite terrane, as defined in the Lake Superior region. These rocks were formed 2,7502,600 m.y. ago. The long dimension of the Puritan batholith as well as that of several batholiths in adjacent Minnesota are oriented sub parallel to the boundary between the greenstone-granite terrane and the older gneiss terrane, to the south. This conformity in trend is interpreted as indicating that the granite probably was emplaced after the two basement crustal segments had been joined.

Professional Paper↗

USGS2023

Bathymetric, hydrodynamic, biological, and water-quality characteristics of a nearshore area of the Laguna Madre near South Padre Island, Texas, 2021–22

A variety of data were collected by the U.S. Geological Survey, in cooperation with the City of South Padre Island, to better understand the physical and biological habitat in Tompkins Channel and adjacent seagrass beds in the lower Laguna Madre, Texas, where the construction of berms has been proposed in the City of South Padre Island’s Shoreline Master Plan. These berms would be used to create living shorelines, defined as shorelines that “connect the land and water to stabilize the shoreline, reduce erosion, and provide ecosystem services, like [maintaining] valuable habitat, that enhances coastal resilience.” Bathymetric surveys show variability in the lagoon depth within the study area and clearly delineate the relatively shallow bay from the deeper Tompkins Channel. There were seasonal patterns in daily mean tidal water-surface elevations, with higher mean tides in the fall and spring and lower mean tides in the winter and summer. Seasonal differences in mean tidal water-surface elevations were primarily caused by astronomical forces. Shorter-term (daily and weekly) variations in tidal water-surface elevations were produced by meteorological forcing resulting from high- and low-pressure systems, the passage of fronts, local storms, and tropical storms. The tide driven currents typically were toward the north-northwest during flood tide or toward the south-southeast during ebb tide, roughly parallel to the general South Padre Island shoreline orientation. Prevailing water current velocity (current speed and direction) indicates that there usually is a net inflow into the lower Laguna Madre from the Gulf of Mexico and a net outflow at locations north of the study area. The overall seagrass density was generally lowest in the northeast section of the transect. Areas of low seagrass density were also most commonly observed close to the channel edge of the transect. Overall, Syringodium filiforme was considerably more abundant than Thalassia testudinum and Halodule wrightii . Amphipods from the families Ampithoidae and Melitidae were the most abundant benthic invertebrates, followed by gastropods in the family Calyptraeidae. Higher abundances of benthic invertebrates were recorded at sites farther away from Tompkins Channel than at sites closer to it, perhaps because of the sensitivity of these organisms to disturbances caused by erosional forces in the channel. Changes in water-quality measured during a 2-day survey were consistent with patterns observed in prior studies, indicating biological processes likely play an important role in the physicochemical environment of the study area. Collectively, the data provide baseline information that can be used as reference conditions prior to any shoreline enhancement activities in the lower Laguna Madre.

Texas↗

USGS2015

What lies beneath: geophysical mapping of a concealed Precambrian intrusive complex along the Iowa–Minnesota border

Large-amplitude gravity and magnetic highs over northeast Iowa are interpreted to reflect a buried intrusive complex composed of mafic–ultramafic rocks, the northeast Iowa intrusive complex (NEIIC), intruding Yavapai province (1.8–1.72 Ga) rocks. The age of the complex is unproven, although it has been considered to be Keweenawan (∼1.1 Ga). Because only four boreholes reach the complex, which is covered by 200–700 m of Paleozoic sedimentary rocks, geophysical methods are critical to developing a better understanding of the nature and mineral resource potential of the NEIIC. Lithologic and cross-cutting relations interpreted from high-resolution aeromagnetic and airborne gravity gradient data are presented in the form of a preliminary geologic map of the basement Precambrian rocks. Numerous magnetic anomalies are coincident with airborne gravity gradient (AGG) highs, indicating widespread strongly magnetized and dense rocks of likely mafic–ultramafic composition. A Yavapai-age metagabbro unit is interpreted to be part of a layered intrusion with subvertical dip. Another presumed Yavapai unit has low density and weak magnetization, observations consistent with felsic plutons. Northeast-trending, linear magnetic lows are interpreted to reflect reversely magnetized diabase dikes and have properties consistent with Keweenawan rocks. The interpreted dikes are cut in places by normally magnetized mafic–ultramafic rocks, suggesting that the latter represent younger Keweenawan rocks. Distinctive horseshoe-shaped magnetic and AGG highs correspond with a known gabbro, and surround rocks with weaker magnetization and lower density. Here, informally called the Decorah complex, the source body has notable geophysical similarities to Keweenawan alkaline ring complexes, such as the Coldwell and Killala Lake complexes, and Mesoproterozoic anorogenic complexes, such as the Kiglapait, Hettasch, and Voisey’s Bay intrusions in Labrador. Results presented here suggest that much of the NEIIC is composed of such complexes, and broadly speaking, may be a discontinuous group of several intrusive bodies. Most units are cut by suspected northwest-trending faults imaged as magnetic lineaments, and one produces apparent sinistral fault separation of a dike in the eastern part of the survey area. The location, trend, and apparent sinistral sense of motion are consistent with the suspected faults being part of the Belle Plaine fault zone, a complex transform fault zone within the Midcontinent rift system that is here proposed to correspond with a major structural discontinuity.

Iowa, Minnesota↗

USGS1967

Geology of the Windsor quadrangle, Massachusetts

The Windsor quadrangle lies on the boundary between the eugeosynclinal and miogeosynclinal rocks of the Appalachian geosyncline on the western flank of the metamorphic high in western New England. Precambrian rocks crop out in a north-trending belt in the central part of the quadrangle. They have been classified into 2 formations. The Stamford Granite Gneiss crops out in the eastern half of the Precambrian terrane. It is a microcline-quartz-biotite augen gneiss. Stratified Precambrian rocks (the Hinsdale Gneiss) crop out entirely the west of the Stamford Granite Gneiss. They are predominantly highly metamorphosed felsic gneisses and .quartzites with minor calc-silicate rock, amphibolite, and graphitic gneiss. Eugeosynclinal rocks (the Hoosac Formation and the Rowe Schist), .ranging in age from Lower Cambrian to Lower Ordovician, crop out in a north-trending belt east of the Precambrian terrane. They are composed predominantly of albite schist and muscovite-chlorite schist with minor garnet schist, quartz-muscovite-calcite schist, felsic granulite and gneiss, quartzite, greenschist, and carbonaceous phyllite and schist. West of the Precambrian rocks, the Hoosac Formation is overlain by a miogeosynclinal sequence (the Dalton Formation, Cheshire Quartzite, Kitchen Brook Dolomite, Clarendon Springs Dolomite, Shelburne Marble, and the Bascom Formation) ranging in age from Lower Cambrian to Lower Ordovician. These rocks are unconformably overlain by the Berkshire Schist of Middle Ordovician age that is composed of carbonaceous schist, phyllite, and quartzite. The relationships in the zone of transition between the miogeosynclinal and eugeosynclinal rocks are unknown because the rocks of this zone are no longer present. The contact between the eugeosynclinal Hoosac Formation and the Dalton Format ion is conformable and deposition. The dominant structure is a large recumbent, northwest-facing anticline (the Hoosac nappe) with a Precambrian co re. The miogeosynclinal rocks are inverted in the northwestern part of the quadrangle and upright in the southwestern part of the quadrangle. A later generation of open, post-metamorphic folds has folded the recumbent folds in the miogeosynclinal rocks. The eugeosynclinal rocks show 3 phases of folding. The earliest folds are isoclinal, have steep plunges, were synmetamorphic, and have a strong axial plane schistosity. Two post-metamorphic generations of folds are more open and have axial plane cleavage. The development of the Hoosac nappe and the isoclinal folds was accompanied by regional metamorphism of the garnet zone. The pressure exceeded the pressure for the triple point of the Al2SiO 5 polymorphs. The composition of the paragonite coexisting with muscovite suggests a period of retrograde metamorphism for the Paleozoic rocks as well as the Cambrian rocks that were originally of higher grade (sillimanite? ). Later events include high-angle faulting (Triassic?), erosion, and Pleistocene glaciation.

Open-File Report↗

USGS2007

Water velocity and suspended solids measurements by in-situ instruments in Upper Klamath Lake, Oregon

The U. S. Geological Survey conducted hydrodynamic measurements in Upper Klamath Lake during four summer seasons (approximately mid-June to mid-September) during 2003 to 2006. Measurements included water current profiles made by acoustic Doppler current profilers at a number of fixed locations in the lake during all four years as well as from a moving boat during 2005 and 2006. Measurements of size distribution of suspended material were made at four locations in the lake during 2004-2006. Raw (unfiltered) data are presented as time series of measurements. In addition, water-velocity data have been filtered to remove wind-induced variations with periods less than thirty hours from the measurements. Bar graphs of horizontal and vertical water speed and acoustic backscatter have been generated to discern diurnal variations, especially as they relate to wind patterns over the lake. Mean speeds of the horizontal currents in the lake range between about 3.5 to 15 cm/s with the higher speeds at the deep locations in the trench on the west side of the lake. Current directions generally conform to the lake’s bathymetry contours and the water circulation pattern is usually in a clockwise direction around the lake as established by the prevailing north to northwesterly surface winds in the region. Diurnal patterns in horizontal currents probably relate to diurnal wind patterns with minimum wind speeds near noon and maximum wind speeds near 2100. Diurnal variations in vertical velocities do not appear to be related to wind patterns; they do appear to be related to expected patterns of vertical migration of Aphanizomenon flos aquae , (AFA) the predominant species of blue-green algae in the lake. Similarly, diurnal variations in acoustic backscatter, especially near the lake’s surface, are probably related to the vertical migration of AFA.

Oregon↗

USGS2007

The Black Mountain tectonic zone--a reactivated northeast-trending crustal shear zone in the Yukon-Tanana Upland of east-central Alaska: Chapter D in Recent U.S. Geological Survey studies in the Tintina Gold Province, Alaska, United States, and Yukon, Canada--results of a 5-year project

The Black Mountain tectonic zone in the YukonTanana terrane of east-central Alaska is a belt of diverse northeast-trending geologic features that can been traced across Black Mountain in the southeast corner of the Big Delta 1°×3° degree quadrangle. Geologic mapping in the larger scale B1 quadrangle of the Big Delta quadrangle, in which Black Mountain is the principal physiographic feature, has revealed a continuous zone of normal and left-lateral strikeslip high-angle faults and shear zones, some of which have late Tertiary to Quaternary displacement histories. The tectonic zone includes complexly intruded wall rocks and intermingled apophyses of the contiguous mid-Cretaceous Goodpaster and Mount Harper granodioritic plutons, mafic to intermediate composite dike swarms, precious metal mineralization, early Tertiary volcanic activity and Quaternary fault scarps. These structures define a zone as much as 6 to 13 kilometers (km) wide and more than 40 km long that can be traced diagonally across the B1 quadrangle into the adjacent Eagle 1°×3° quadrangle to the east. Recurrent activity along the tectonic zone, from at least mid-Cretaceous to Quaternary, suggests the presence of a buried, fundamental tectonic feature beneath the zone that has influenced the tectonic development of this part of the Yukon-Tanana terrane. The tectonic zone, centered on Black Mountain, lies directly above a profound northeast-trending aeromagnetic anomaly between the Denali and Tintina fault systems. The anomaly separates moderate to strongly magnetic terrane on the northwest from a huge, weakly magnetic terrane on the southeast. The tectonic zone is parallel to the similarly oriented left-lateral, strike-slip Shaw Creek fault zone 85 km to the west.

Alaska;Yukon↗

USGS2022

Field-trip guide to continental arc to rift volcanism of the southern Rocky Mountains—Southern Rocky Mountain, Taos Plateau, and Jemez Mountains volcanic fields of southern Colorado and northern New Mexico

The southern Rocky Mountains of northern New Mexico and southern Colorado preserve the Oligocene to Pleistocene record of North American continental arc to rift volcanism. The 35–23 million year old (Ma) southern Rocky Mountain volcanic field (SRMVF), spectacularly preserved in the San Juan Mountains of southern Colorado, records the evolution of large andesitic stratovolcanoes to complex caldera clusters, from which at least 22 major ignimbrite sheets (each 150–5,000 cubic kilometers) were erupted. Outflow deposits of the SRMVF preserved along the broadly uplifted northwest flank of the northern Rio Grande rift basin (the San Luis Valley) provide critical structural and temporal constraints on the inception of crustal extension. Coincident with waning stages of SRMVF caldera-forming volcanism (~25.4 Ma), extensional tectonism was accompanied by a transition from bimodal early Miocene to intermediate-composition late Miocene and dominantly basaltic Pliocene rift volcanism of the Taos Plateau in the southern San Luis Basin. Concomitant rift volcanism in the Española Basin and bordering Jemez Mountains of northern New Mexico records a similar Miocene eruptive history dominated by intermediate-composition volcanism that transitioned locally to Pliocene rift-related basaltic volcanism of the Cerros del Rio volcanic field and culminated in eruptions of the iconic rhyolitic Pleistocene Bandelier Tuff and formation of the Valles Caldera along the northwestern rift-basin margin. This 6-day, 7-night field trip will focus, in broadly equal proportions, on rift-related extensional volcanism of the Jemez Mountains and Taos Plateau regions during the first half of the trip, and on caldera-forming volcanism of the southern Rocky Mountain volcanic field during the second half of the trip. The 35-million-year volcanic history of the region highlighted by new geologic mapping, high-resolution geochronology, petrologic, geochemical, and geophysical data facilitates discussion of (1) the magmatic response to the tectonic transition from subducted-slab arc to continental-rift volcanism; (2) the nature and temporal evolution of rift magmas; (3) fault controls on the spatial evolution of rift magmatism; (4) the diversity of continental-arc ignimbrite volcanism and associated lavas; (5) ignimbrite caldera structure and associated intrusions in three-dimension; (6) the role of recycled crystal mush and magmatic cumulates during growth of Cordilleran batholiths; and (7) high-precision geochronologic contributions to interpretation of relations between regional tectonic and volcanic processes. Most stops will be along roads, but there will be moderate hikes on trails of less than 1-hour duration covering 1–2 kilometers (0.6–1.2 miles) with modest elevation gain of <150 meters (<492 feet). The route will progress in reverse stratigraphic order, starting in the Jemez Mountains of New Mexico and proceed northward to San Luis Basin and San Luis Hills before turning west to the southeast and central San Juan Mountains. Our last full day takes us to the little-visited and only recently mapped, Bonanza caldera of the northeastern San Juan Mountains and on the final day, we leave the San Luis Valley to briefly explore the Tertiary subvolcanic plutons of the Collegiate Range along the west side of the Arkansas Valley rift valley, en route to Denver. The authors of all daily contributions acknowledge the helpful reviews by Amy Gilmer and Joe Colgan and thank Christine Chan and Jeremy Havens for assistance with figures, tables, and guidebook text.

Colorado, New Mexico↗

USGS2016

Geologic map and cross sections of the Embudo Fault Zone in the Southern Taos Valley, Taos County, New Mexico

The southern Taos Valley encompasses the physiographic and geologic transition zone between the Picuris Mountains and the San Luis Basin of the Rio Grande rift. The Embudo fault zone is the rift transfer structure that has accommodated the kinematic disparities between the San Luis Basin and the Española Basin during Neogene rift extension. The eastern terminus of the transfer zone coincides with the intersection of four major fault zones (Embudo, Sangre de Cristo, Los Cordovas, and Picuris-Pecos), resulting in an area of extreme geologic and hydrogeologic complexities in both the basin-fill deposits and the bedrock. Although sections of the Embudo fault zone are locally exposed in the bedrock of the Picuris Mountains and in the late Cenozoic sedimentary units along the top of the Picuris piedmont, the full proportions of the fault zone have remained elusive due to a pervasive cover of Quaternary surficial deposits. We combined insights derived from the latest geologic mapping of the area with deep borehole data and high-resolution aeromagnetic and gravity models to develop a detailed stratigraphic/structural model of the rift basin in the southern Taos Valley area. The four fault systems in the study area overlap in various ways in time and space. Our geologic model states that the Picuris-Pecos fault system exists in the basement rocks (Picuris formation and older units) of the rift, where it is progressively down dropped and offset to the west by each Embudo fault strand between the Picuris Mountains and the Rio Pueblo de Taos. In this model, the Miranda graben exists in the subsurface as a series of offset basement blocks between the Ponce de Leon neighborhood and the Rio Pueblo de Taos. In the study area, the Embudo faults are pervasive structures between the Picuris Mountains and the Rio Pueblo de Taos, affecting all geologic units that are older than the Quaternary surficial deposits. The Los Cordovas faults are thought to represent the late Tertiary to Quaternary reactivation of the old and deeply buried Picuris-Pecos faults. If so, then the Los Cordovas structures may extend southward under the Picuris piedmont, where they form growth faults as they merge downward into the Picuris-Pecos bedrock faults. The exceptionally high density of cross-cutting faults in the study area has severely disrupted the stratigraphy of the Picuris formation and the Santa Fe Group. The Picuris formation exists at the surface in the Miranda and Rio Grande del Rancho grabens, and locally along the top of the Picuris piedmont. In the subsurface, it deepens rapidly from the mountain front into the rift basin. In a similar manner, the Tesuque and Chamita Formations are shallowly exposed close to the mountain front, but are down dropped into the basin along the Embudo faults. The Ojo Caliente Sandstone Member of the Tesuque Formation appears to be thickest in the northwestern study area, and thins toward the south and the east. In the study area, the Lama formation thins westward and southward. The Servilleta Basalt is generally thickest to the north and northwest, thins under the Picuris piedmont, and terminates along a major, linear, buried strand of the Embudo fault zone, demonstrating that the Servilleta flows were spatially and temporally related to Embudo fault activity.

New Mexico↗

USGS2006

The geochemical record of the last 17,000 years in the Guaymas Basin, Gulf of California

Sediments deposited on the western slope of the Guaymas Basin in the central Gulf of California are composed predominantly of detrital clastic material and biogenic silica (biopal), with minor organic material (average of 2.8% organic carbon) and calcium carbonate. The CaCO 3 is derived from calcareous plankton and is highly variable ranging from 0% to 16%. In general, the CaCO 3 content of the sediments varies inversely with the biopal content, reflecting the relative abundance of calcareous and siliceous plankton in the photic zone. Siliceous plankton dominate when winds are predominantly out of the northwest producing strong upwelling. Calcareous plankton indicates weak southeasterly winds that bring warm, tropical Pacific surface water into the Gulf. Based mainly on relative abundances of biopal and CaCO 3 , the sediments deposited over the last 17,000 years in the western Guaymas Basin can be divided into five intervals. In general, the sediments in the intervals with high biopal and low CaCO 3 are laminated, but this is not always true. Unlike most other continental margins of the world with well-developed oxygen minimum zones where highest concentrations of organic carbon and redox-sensitive trace metals occur in laminated sediments, the laminated sediments on the anoxic slope of the western Guaymas Basin do not always have the highest concentrations of organic carbon and trace metals such as Mo and Cd.

Guaymas Basin, Gulf of California↗

USGS2020

Energy and minerals division tight oil and gas committee: Activities and commodity report for 2019-2020

In 2019, total daily tight oil and gas production increased in the United States month over month, with annualized growth of 14% for oil and 12% for gas. Those gains leveled off in the first quarter of 2020 due to aggressive price competition and increases in international production. Then came the pandemic with a substantially larger dose of economic turmoil, driving down demand due in part to shelter in place orders and safety concerns around travel. Between March and May, tight oil and gas production dropped by nearly 2 million bpd and almost 5 Bcf/day before beginning to recover. Production has continued to increase for the most part through the second half of 2020, but drilling remains subdued throughout most of the U.S. and uncertainty around long term demand along with the current price environment and general state of the economy has contributed to layoffs throughout the industry. Some shale-gas production has declined recently, but a few areas have seen expansion due to construction of LNG facilities along the East Coast of the U.S. (e.g., the Haynesville Formation). Current U.S. shale-gas production is still higher now than in 2019, with daily production of almost 71 Bcf as of October 2020 driven in large part by increased production from the Marcellus Shale in the Appalachian Basin and shales within the Permian Basin. Shale liquids production is down by around a million bpd to approximately 7.1 million (September 2020; U.S. EIA) from pre-pandemic production levels at the end of 2019 and beginning of 2020. Tight oil production remains dominated by plays in the Permian Basin as well as the Bakken and Eagle Ford Formations. On the development and production front, new enhanced oil recovery approaches for tight shale reservoirs are being more widely implemented. Natural gas or CO2 injection is currently being utilized in the Bakken Formation, Eagle Ford Formation, Anadarko Basin, and the Permian Basin to optimize injection sequences and boost recovery. Refracturing of existing wells to reduce drilling costs, improve production, and prolong well productive life has also begun to occur more widely in developed plays. International interest in exploiting hydrocarbons from unconventional reservoirs continues to develop, with active exploration projects on most continents. Europe remains relatively underexplored as compared to North America, although a total of 141 exploration and appraisal wells with a possible shale-gas exploration component have been spudded, including horizontal legs from vertical wells. Shale exploration has made a breakthrough in China with shale gas output in 2019 of 10 billion cubic meters (35.3 Bcf), 60% of which was produced from Sinopec’s Fuling Shale Gas field. Lacustrine shale oil exploration has also been successful in the Sichuan and Ordos Basins in central China, Junggar and Tarim Basins in northwest China, and Songliao Basin in north China, and Bohai Bay Basins in northeast China as of 2018. South America’s potential as an unconventional shale gas and oil province is mainly in Argentina and Brazil, where the production from Neuquen Basin’s tight shale of the Vaca Muerta Formation has been steadily increasing since 2016, but only 4% of the shale resource has been developed thus far. According to International Energy Agency’s report in 2013, Brazil holds the 9th largest unconventional gas reserves. Brazil has shale oil and gas potential in the Parana, Solimoes and Amazon Basins and is actively producing from the oil shale unit of the Irati Formation. In 2019, the Brazil energy ministry launched REATE 2020 to boost onshore investments that include the expectation of drilling an experimental unconventional well in the northeast region. For this inaugural report, the new AAPG EMD Tight Oil and Gas Committee (TO&G; formerly the Shale Gas & Liquids and Tight Gas Sands committees) has developed new commodity report requirements for contributors. This includes shorter annual reports focused on new developments, play concepts, along with the typical updates on production and new drilling in the play areas they cover. We are also asking contributors to collect background geologic and production related information into a document that summarizes important features of the plays they cover that will be stored on the TO&G webpage along with our commodity reports. TO&G is currently working to expand the number of contributors to cover more play areas and replace committee and advisory board members that have recently stepped down. Changes to committee leadership occurred in October as recent chairs transition to EMD elected positions.

Activities and Commodities Report↗