SEARCH · Geology Reports

Results for “International Journal of Applied Earth Observations and Geoinformation”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

1,690 records · Page 8Linked to original sources

USGS2024

Elastic stress coupling between supraglacial lakes

Supraglacial lakes have been observed to drain within hours of each other, leading to the hypothesis that stress transmission following one drainage may be sufficient to induce hydro-fracture-driven drainages of other nearby lakes. However, available observations characterizing drainage-induced stress perturbations have been insufficient to evaluate this hypothesis. Here, we use ice-sheet surface-displacement observations from a dense global positioning system array deployed in the Greenland Ice Sheet ablation zone to investigate elastic stress transmission between three neighboring supraglacial lake basins. We find that drainage of a central lake can place neighboring basins in either tensional or compressional stress relative to their hydro-fracture scarp orientations, either promoting or inhibiting hydro-fracture initiation beneath those lakes. For two lakes located within our array that drain close in time, we identify tensional surface stresses caused by ice-sheet uplift due to basal-cavity opening as the physical explanation for these lakes' temporally clustered hydro-fracture-driven drainages and frequent triggering behavior. However, lake-drainage-induced stresses in the up-flowline direction remain low beyond the margins of the drained lakes. This short stress-coupling length scale is consistent with idealized lake-drainage scenarios for a range of lake volumes and ice-sheet thicknesses. Thus, on elastic timescales, our observations and idealized-model results support a stress-transmission hypothesis for inducing hydro-fracture-driven drainage of lakes located within the region of basal cavity opening produced by the initial drainage, but refute this hypothesis for distal lakes.

JGR Earth Surface↗

USGS2026

Validating antler- and movement-based estimates of caribou reproduction using video camera collars

Wildlife agencies invest substantial resources in monitoring ungulate reproductive rates given ongoing concerns about population trends and their implications for management. For barren-ground caribou ( Rangifer tarandus ) in the North American Arctic, data on parturition and neonate survival have traditionally been collected using visual observations of antler retention and calf presence from small, fixed-wing aircraft. However, these surveys are weather-dependent, expensive, and dangerous, motivating the development of movement-based approaches that infer reproductive events from global positioning system (GPS) location data. We had the unique opportunity to use video camera collars to validate both antler- and movement-based methods for estimating reproduction in barren-ground caribou, using data from the Porcupine (2018–2023) and Western Arctic (2021, 2023) herds in Alaska, USA, and Yukon, Canada. For the movement-based approaches, we assessed individual-based and population-based methods, which both inferred parturition following a sharp decline in movement and inferred calf loss following a sharp increase in movement. We investigated these approaches using rarified 1-, 2-, 4-, and 8-hour fix intervals. Based on video collar observations, we found that antler retention at the onset of the calving period was highly accurate for predicting parturition (96% accuracy) but became unreliable as calving progressed, as approximately 80% of parturient females shed their antlers during the calving period. In contrast, both movement methods performed marginally for estimating caribou parturition (~70% accuracy), with estimates from the individual-based method exhibiting greater bias than those from the population-based method. The individual-based method also poorly predicted neonate survival (≤49% accuracy for detecting parturition and calf fate for the Porcupine Herd). Video data revealed that inaccuracies with the movement methods often occurred when caribou bedded during storms, rested after traversing mountainous terrain, lost a calf shortly after birth, or increased movement to evade insects. These results have important implications for management agencies using antler- and movement-based methods to estimate caribou reproduction, particularly when informing assessments of population decline or recovery. Our results demonstrate the utility of video collar data for validating reproductive monitoring approaches and provide insights into how these approaches can be improved.

Alaska, Yukon↗

USGS2026

Overstorey mortality promotes juvenile piñon pine growth during favourable weather at cooler, wetter sites

Hotter droughts have resulted in widespread tree die-off events globally, frequently leading to regeneration failure. Dry forest recovery often depends on the growth and survival of extant juvenile trees. However, it is unclear how microenvironmental changes following overstorey tree die-off affect juvenile trees, particularly in dryland systems where tree recruitment is typically limited by water availability and heat stress. We simulated an overstorey tree die-off event by girdling trees in piñon-juniper woodlands across the south-western United States. We sampled juvenile piñon pine growth from live and dead overstorey treatments across six study sites spanning a regional latitudinal gradient and local elevational gradients. We examined how juvenile branch and needle growth differed between live and dead overstorey treatments, and whether responses varied with weather conditions and juvenile tree size following overstorey mortality. We found greater juvenile branch and needle growth under dead compared with live overstorey trees for 2 years following overstorey mortality at mid- and high-elevation sites which are typically cooler and wetter than the other sites. These observed growth releases were contingent on favourable post-mortality weather conditions. Higher growth under dead overstorey occurred at sites experiencing near-average climatic water deficits compared with sites experiencing above-average climatic water deficits. Growth at all sites increased from the first to second year after overstorey mortality. Across sites, growth was unrelated to juvenile tree size. Synthesis . Our results underscore differentiation in juvenile responses to overstorey tree die-off driven by local site conditions and weather across the range of Pinus edulis . Overstorey mortality resulted in consistently higher juvenile growth only at climatically favourable sites and during favourable weather, while unmeasured microsite differences could help account for variation observed at the hottest and driest site. Results from less climatically favourable sites suggest that overstorey trees neither directly limit nor facilitate juvenile growth, though further study over longer timeframes is needed to resolve the pace and magnitude of potential recovery or decline. Overall, juvenile vigour may be promoted following overstorey mortality only in a narrow spatial (site) and temporal (weather) environmental context, suggesting additional vulnerabilities for piñon populations under more arid conditions.

Arizona, Colorado↗

USGS2025

Framework for assessing intranational risk of critical mineral sectors: Case study of India

Recent geopolitical actions regarding the supply of critical minerals have highlighted both the threats posed by countries dominating a critical mineral supply chain, and the potential mitigations served by alternative supplier countries. However, no systematic quantification exists for the intranational factors that determine such threats or mitigations. This study outlines a methodological framework for quantifying the intranational risk profile of critical mineral sectors and compares them with the sector's international potential for leverage. The four intranational factors of concentration, synchronization, private sector involvement, and regulatory obstacles were analyzed across multiple scales in order to determine an intranational risk score that quantifies the resilience or fragility of the critical mineral sector in question. Network analysis was also separately conducted to identify the most important entities operating across all critical mineral sectors. Finally, this study assessed the critical mineral sector's global share of reserves and production to determine an international risk score that quantifies the country's critical mineral sector's leverage potential. A case study of India showed that two critical mineral sectors with high leverage potential, chromite and barite, were respectively intranationally resilient and fragile. Of the remaining sectors with minimal leverage, five sectors such as aluminum were intranationally resilient and may serve as viable mitigation options for future critical mineral supply. Three sectors such as titanium were intranationally fragile, but recent regulatory developments may both decrease intranational risk and increase international risk, potentially making them major critical mineral sectors in the future.

Resources Policy↗

USGS2023

Slow slip detectability in seafloor pressure records offshore Alaska

In subduction zones worldwide, seafloor pressure data are used to observe tectonic deformation, particularly from megathrust earthquakes and slow slip events (SSEs). However, such measurements are also sensitive to oceanographic circulation-generated pressures over a range of frequencies that conflate with tectonic signals of interest. Using seafloor pressure and temperature data from the Alaska Amphibious Community Seismic Experiment, and sea surface height data from satellite altimetry, we evaluate the efficacy of various seasonal and oceanographic pressure signal proxy corrections and conduct synthetic tests to determine their impact on the timing and amplitude prediction of ramp-like signals typical of SSEs. We find that subtracting out the first mode of the complex empirical orthogonal functions of the pressure records on either the shelf or slope yields signal root-mean-square error (RMS) reductions up to 73% or 80%, respectively. Additional correction with proxies that exploit the depth-dependent spatial coherence of pressure records provides cumulative variance reductions up to 83% and 93%, respectively. Our detectability tests show that the timing and amplitude of synthetic SSE-like ramps can be well constrained for ramp amplitudes ≥4 cm on the shelf and ≥2 cm on the slope, using a fully automated detector. The principal limits on detectability are residual abrupt changes in pressure that occur as part of the transition to and from summer to winter conditions but are not adequately characterized by our seasonal corrections, as well as the inability to properly account for instrumental drift, which is not readily separated from the seasonal signal.

Alaska↗

USGS2026

Egg thiamine concentrations reflect dietary differences between four hatchery strains, including two morphotypes, of Lake Trout in Lake Ontario

Objective Test whether dietary differences among hatchery strains of Lake Trout Salvelinus namaycush were associated with variation in egg thiamine concentrations and assess the potential for using strain-specific traits to mitigate thiamine deficiency complex (TDC) in Lake Ontario restoration efforts. Methods Stomach content analysis and stable isotope mixing models were used to compare diets among four hatchery strains of Lake Trout, representing lean and humper morphotypes. Egg thiamine concentrations were measured to test whether dietary differences correlated with susceptibility to TDC. Results Significant differences in diet and egg thiamine concentrations were observed among Lake Trout strains. A humper-like morphotype strain exhibited elevated thiamine levels, which were associated with reduced consumption of prey known to degrade thiamine levels when consumed, Alewife Alosa pseudoharengus and Rainbow Smelt Osmerus mordax , and increased reliance on Round Goby Neogobius melanostomus or sculpin species (Slimy Sculpin Cottus cognatus and Deepwater Sculpin Myoxocephalus thompsonii ). These findings support the link between the consumption of Alewife and Rainbow Smelt and thiamine deficiency. Conclusions Our findings support a link between strain-specific dietary preferences and susceptibility to TDC in Lake Trout. Preferential stocking of strains less prone to TDC, such as the strain derived from a humper morph from Lake Superior, could enhance restoration success in Lake Ontario. This strategy may be especially effective given the continued dominance of Alewife in the lake's prey base and the current management priorities supporting fisheries for Pacific salmon Oncorhynchus spp.

North American Journal of Fisheries Management↗

USGS2024

Diel temperature signals track seasonal shifts in localized groundwater contributions to headwater streamflow generation at network scale

Groundwater contributions to streamflow sustain aquatic ecosystem resilience; streams without significant groundwater inputs often have well-coupled air and water temperatures that degrade cold-water habitat during warm low flow periods. Widespread uncertainty in stream-groundwater connectivity across space and time has created disparate predictions of energy and nutrient fluxes across headwater networks, hindering predictions of cold-water habitat resilience under climate change scenarios. Recently, annual paired air and water temperature signals have been harnessed to indicate stream water thermal sensitivity and the dominance of deep versus shallow groundwater influence, although the utility of diel air–water temperature signal metrics for hydrologic inference has remained unexplored. Here we analyzed two consecutive years of locally paired, air–water temperature data from 47 headwater stream sites in the Catskill Mountains, New York, USA, and discovered characteristic seasonal patterns in diel temperature signal sinusoid metrics (amplitude ratio, phase lag, and mean ratio) driven by shifts in streamflow generation mechanisms and stream network position. Hydrologic interpretations of observed patterns were supported by stream heat budget model scenarios and additional analysis of paired air–water temperature data from two streams in Shenandoah National Park, Virginia, USA, with well characterized stream-groundwater connectivity. We found that within smaller tributaries, streamflow generation transitions from runoff to groundwater dominance were driven by hillslope drying during seasonal periods of lower precipitation. This was evidenced by significant correlations (p < 0.01) between daily water:air temperature signal amplitudes (non-linear decreases of ∼ 50 %) and derived base-flow index at 22 of the 28 sites, indicating enhanced local groundwater influence on streamflow promotes decoupling of diel air–water temperature signals. Additionally, ratios between daily water:air temperature signal means were lower in tributaries (∼0.68) when compared to main-stem (∼0.8) sites, increasing linearly throughout the observational period. In conceptual stream heat budget models, groundwater inflow had minimal effects on daily phase lags (∼0.2 hr), but increases in fractional groundwater discharge (0–50 %) depressed daily amplitude (∼20 % to 50 %) and mean ratios (∼15 %), supporting the sensitivity of daily metrics to interpreted changes in seasonal groundwater contributions to streamflow. During observational periods (i.e., April through October 2021 and 2022), significant differences (p < 0.01) between tributary and main-stem air–water metrics occurred when base-flow contributions were highest (∼0.93 vs. ∼ 0.68), as sites lower in the network had daily temperature metrics dominated by stream channel thermal inertia, rather than local groundwater connectivity, showing enhanced air–water diel signal coupling during warmer, drier periods. Divergent air temperature coupling across the network was interpreted as being driven by distance from local groundwater source zones, additional lateral groundwater inflows do not contribute a meaningful fraction to channel discharge lower in the network. Given the growing footprint of stream temperature observations, diel air–water temperature signals can provide distributed metrics sensitive to upstream groundwater discharge. Consequently, these metrics can support ongoing efforts by resource managers and researchers seeking to forecast the resilience of cold-water habitat to climate warming and changing precipitation regimes in mountain headwater streams.

New York, Virginia↗

USGS2024

Isotopic evaluation of the National Water Model reveals missing agricultural irrigation contributions to streamflow across the western United States

The National Water Model (NWM) provides critical analyses and projections of streamflow that support water management decisions. However, the NWM performs poorly in lower-elevation rivers of the western United States (US). The accuracy of the NWM depends on the fidelity of the model inputs and the representation and calibration of model processes and water sources. To evaluate the NWM performance in the western US, we compared observations of river water isotope ratios ( 18 O / "> 16 O and 2 H / "> 1 H expressed in δ notation) to NWM-flux-estimated (model) river reach isotope ratios. The modeled estimates were calculated from long-term (2000–2019) mean summer (June, July, and August) NWM hydrologic fluxes and gridded isotope ratios using a mass balance approach. The observational dataset comprised 4503 in-stream water isotope observations in 877 reaches across 5 basins. A simple regression between observed and modeled isotope ratios explained 57.9 % ( δ 18 O) and 67.1 % ( δ 2 H) of variance, although observations were 0.5 ‰ ( δ 18 O) and 4.8 ‰ ( δ 2 H) higher, on average, than mass balance estimates. The unexplained variance suggest that the NWM does not include all relevant water fluxes to rivers. To infer possible missing water fluxes, we evaluated patterns in observation–model differences using δ 18 O diff ( δ 18 O obs − δ 18 O mod ) and d diff ( δ 2 H diff - 8 ⋅ δ 18 O diff "> ). We detected evidence of evaporation in observations but not model estimates (negative d diff and positive δ 18 O diff ) at lower-elevation, higher-stream-order, arid sites. The catchment actual-evaporation-to-precipitation ratio, the fraction of streamflow estimated to be derived from agricultural irrigation, and whether a site was reservoir-affected were all significant predictors of d diff in a linear mixed-effects model, with up to 15.2 % of variance explained by fixed effects. This finding is supported by seasonal patterns, groundwater levels, and isotope ratios, and it suggests the importance of including irrigation return flows to rivers, especially in lower-elevation, higher-stream-order, arid rivers of the western US.

Hydrology and Earth Systems Science↗

USGS2024

ECCOE Landsat quarterly Calibration and Validation report—Quarter 1, 2024

Executive Summary The U.S. Geological Survey Earth Resources Observation and Science Calibration and Validation (Cal/Val) Center of Excellence (ECCOE) focuses on improving the accuracy, precision, calibration, and product quality of remote-sensing data, leveraging years of multiscale optical system geometric and radiometric calibration and characterization experience. The ECCOE Landsat Cal/Val Team continually monitors the geometric and radiometric performance of active Landsat missions and makes calibration adjustments, as needed, to maintain data quality at the highest level. This report provides observed geometric and radiometric analysis results for Landsats 8 and 9 for quarter 1 (January–March), 2024. All data used to compile the Cal/Val analysis results presented in this report are freely available from the U.S. Geological Survey EarthExplorer website: https://earthexplorer.usgs.gov . This quarterly report is the third to include analysis results for Landsat 9, which was launched in September 2021. The inclusion of Landsat 9 analysis results was dependent on two factors: a complete reprocessing of the Landsat 9 data archive and enough time elapsing to begin formulating lifetime trends. In April 2023, all Landsat 9 image data acquired since the satellite’s launch were reprocessed to take advantage of calibration updates identified by the ECCOE Landsat Cal/Val Team. Additional information about the Landsat 9 reprocessing effort is available at https://www.usgs.gov/landsat-missions/news/upcoming-reprocessing-all-landsat-9-data . Additional information about Landsat 9 prelaunch, commissioning, and early on-orbit imaging performance is available at https://www.mdpi.com/journal/remotesensing/special_issues/15B4V2K92K . This quarterly report is the first to not include analysis results for Landsat 7 because Enhanced Thematic Mapper Plus imaging was suspended on January 19, 2024, after the satellite transitioned into full sunlight. The satellite has been drifting since early 2022 after being lowered from the nominal orbit altitude, and the transition into full sunlight is a result of the satellite operating in its extended science mission. Additional information about the imaging suspension is available at https://www.usgs.gov/landsat-missions/news/landsat-7-imaging-suspended . Additional information about the Landsat 7 extended science mission is available at https://www.usgs.gov/landsat-missions/landsat-7-extended-science-mission .

Open-File Report↗

USGS2024

ECCOE Landsat quarterly Calibration and Validation report—Quarter 2, 2024

Executive Summary The U.S. Geological Survey Earth Resources Observation and Science Calibration and Validation (Cal/Val) Center of Excellence (ECCOE) focuses on improving the accuracy, precision, calibration, and product quality of remote-sensing data, leveraging years of multiscale optical system geometric and radiometric calibration and characterization experience. The ECCOE Landsat Cal/Val Team continually monitors the geometric and radiometric performance of active Landsat missions and makes calibration adjustments, as needed, to maintain data quality at the highest level. This report provides observed geometric and radiometric analysis results for Landsats 8 and 9 for quarter 2 (April–June) of 2024. All data used to compile the Cal/Val analysis results presented in this report are freely available from the U.S. Geological Survey EarthExplorer website: https://earthexplorer.usgs.gov . This is the fourth quarterly report to include analysis results for Landsat 9, which was launched in September 2021. The inclusion of Landsat 9 analysis results was dependent on two factors: a complete reprocessing of the Landsat 9 data archive and enough time elapsing to begin formulating lifetime trends. In April 2023, all Landsat 9 image data acquired since the satellite’s launch were reprocessed to take advantage of calibration updates identified by the ECCOE Landsat Cal/Val Team. Additional information about the Landsat 9 reprocessing effort is available at https://www.usgs.gov/landsat-missions/news/upcoming-reprocessing-all-landsat-9-data . Additional information about Landsat 9 prelaunch, commissioning, and early on-orbit imaging performance is available at https://www.mdpi.com/journal/remotesensing/special_issues/15B4V2K92K . This is the second quarterly report that does not include analysis results for Landsat 7 because Enhanced Thematic Mapper Plus imaging was suspended on January 19, 2024, after the satellite transitioned into full sunlight. The satellite has been drifting since early 2022 when it was lowered from the nominal orbit altitude, and the transition into full sunlight is a result of the satellite operating in its extended science mission. Additional information about the imaging suspension is available at https://www.usgs.gov/landsat-missions/news/landsat-7-imaging-suspended . Additional information about the Landsat 7 extended science mission is available at https://www.usgs.gov/landsat-missions/landsat-7-extended-science-mission .

Open-File Report↗

USGS2026

Multi-site evaluation of a postfire debris-flow runout forecast method

Postfire debris flows pose a hazard to human life, property, and infrastructure when they travel from steep source areas to urbanized alluvial fans or other developed areas. Existing methods for rapid (<1 week) postfire debris-flow hazard assessment document the increase in the likelihood and size of debris flows as the magnitude of high-intensity rain necessary to initiate debris flows increases but do not indicate the extent of downstream debris-flow runout. Although many models for the simulation of debris-flow motion are available, there is no established approach for using these models to delineate locations susceptible to postfire debris-flow runout that (a) is feasible to use at the spatial scale of an entire fire; (b) is appropriate for runout onto unconfined areas; (c) reproduces observed relations between runout and rainfall intensity; and (d) characterizes inherent uncertainty in runout, even without spatiotemporally variable rainfall. We propose and evaluate a method for generating postfire debris-flow runout hazard maps that has all the above qualities. Selection of case studies prioritized events triggered by a range of rainfall intensities, locations within and outside of southern California, and observed runout onto unconfined topography. Qualitative and quantitative assessment of performance for four events indicate that simulation results broadly match observations albeit with some discrepancies at a scale larger than structure or land parcel level (approximately 20-m by 20-m). The method may be used to identify potentially hazardous areas immediately following a fire and to provide approximate runout forecasts when a storm is imminent.

Arizona, California↗

USGS2017

Field-trip guide to Mount Hood, Oregon, highlighting eruptive history and hazards

This guidebook describes stops of interest for a geological field trip around Mount Hood volcano. It was developed for the 2017 International Association of Volcanology and Chemistry of the Earth’s Interior (IAVCEI) Scientific Assembly in Portland, Oregon. The intent of this guidebook and accompanying contributions is to provide an overview of Mount Hood, including its chief geologic processes, magmatic system, eruptive history, local tectonics, and hazards, by visiting a variety of readily accessible localities. We also describe coeval, largely monogenetic, volcanoes in the region. Accompanying the field-trip guidebook are separately authored contributions that discuss in detail the Mount Hood magmatic system and its products and behavior (Kent and Koleszar, this volume); Mount Hood earthquakes and their relation to regional tectonics and the volcanic system (Thelen and Moran, this volume); and young surface faults cutting the broader Mount Hood area whose extent has come to light after acquisition of regional light detection and ranging coverage (Madin and others, this volume). The trip makes an approximately 175-mile (280-kilometer) clockwise loop around Mount Hood, starting and ending in Portland. The route heads east on Interstate 84 through the Columbia River Gorge National Scenic Area. The guidebook points out only a few conspicuous features of note in the gorge, but many other guides to the gorge are available. The route continues south on the Mount Hood National Scenic Byway on Oregon Route 35 following Hood River, and returns to Portland on U.S. Highway 26 following Sandy River. The route traverses rocks as old as the early Miocene Eagle Creek Formation and overlying Columbia River Basalt Group of middle Miocene age, but chiefly lava flows and clastic products of arc volcanism of late Miocene to Holocene age.

Oregon↗

USGS2025

Gas emissions from the Sulphur Bank Mercury Mine hydrothermal system, Clear Lake volcanic field, California

The Sulphur Bank Mercury Mine (SBMM) hydrothermal system offers insights into active degassing processes in the Clear Lake volcanic field (CLVF), a high-threat region based on its record of Holocene eruptions and proximity to populated areas. Here we present chemical and isotopic analyses of gas samples collected between 2015 and 2023, along with the first comprehensive CO 2 flux survey of the SBMM area conducted in 2023. Sampled gases are CO 2 - and CH 4 -rich (≥84 and 6 mol% in dry gas, respectively) with high mantle-derived helium contributions ( 3 He/ 4 He = 6.54–7.86 R C /R A ). Carbon isotopic compositions of CO 2 (δ 13 C = −10.0 to −9.5 ‰) and CH 4 (δ 13 C = −35.8 ‰) indicate mixed sources, with significant contributions from metamorphism of organic-rich Franciscan Complex rocks hosting the hydrothermal system. Modeling of gas compositions shows that scrubbing by interaction with air-saturated groundwater strongly influences observed compositional variability. From our CO₂ flux measurements, we estimate the deeply derived CO 2 emission rate from the SBMM hydrothermal area (0.2 km 2 ) at 240 t d −1 , comparable to many quiescently degassing volcanoes worldwide. We also provide a first-order estimate of CH 4 emissions at approximately 0.5 t d −1 . Our findings establish crucial baseline data for future volcanic monitoring efforts, enhancing detection capabilities for potential changes in this active hydrothermal system. This work contributes to the broader understanding of volatile contributions from volcanic and metamorphic sources to the global carbon budget, while highlighting the strong influence of bedrock geology on gas compositions in the CLVF.

California↗

USGS2025

Widespread occurrence of former anhydrite phenocrysts in Laramide-age magmas related to porphyry-skarn Cu mineralization at Santa Rita and Hanover-Fierro, New Mexico, USA

Reports of magmatic anhydrite are relatively rare, with only ~30 occurrences documented worldwide so far. However, magmatic anhydrite saturation is difficult to recognize because anhydrite decomposes rapidly in near-surface environments. In most cases, only anhydrite inclusions shielded within other phenocryst phases were able to survive. Alternatively, since anhydrite phenocrysts preserved in fresh volcanic rocks are characteristically intergrown with apatite phenocrysts, the former presence of anhydrite phenocrysts can be recognized based on the occurrence of lath-shaped cavities that show a strong spatial association with apatite phenocrysts. These cavities can be either empty or filled with low-temperature, secondary minerals such as zeolites, carbonates, or microcrystalline silica. A systematic search for the occurrence of such cavities, combined with optical and Raman-spectroscopic identification of anhydrite inclusions preserved within apatite, hornblende and quartz phenocrysts, demonstrates that most of the Laramide-age magmas associated with the Santa Rita and Hanover-Fierro porphyry-skarn Cu (Zn, Mo, Au, Pb) deposits were saturated in magmatic anhydrite. The anhydrite typically coexisted with monosulfide solid solution (MSS), suggesting oxygen fugacities of ~2.0±0.5 log units above the fayalite-magnetite-quartz buffer. The magmas range from andesitic to rhyodacitic in composition, and from shortly pre-mineralization (~61 Ma) to shortly post-mineralization (~57 Ma) in age. In three samples with particularly well-recognizable former anhydrite phenocrysts, their modal abundance could be quantified based on high-resolution scans of polished hand specimens. The observed modal anhydrite abundances of 0.63–1.8 vol% translate into minimum magma sulfur contents of 0.20–0.56 wt% S. The highest sulfur content of 0.56 wt% S is difficult to reconcile with available anhydrite solubility models, but it could be reproduced in an anhydrite solubility experiment performed at 950 °C and 1.15 GPa on a natural latite containing 13.1 wt% dissolved H2O. The sample with the second-highest sulfur content of 0.26 wt% S requires ~10 wt% H2O in the silicate melt, and, consequently, a minimum pressure of ~0.5 GPa. Taken together, the results suggest that the magmas of the Central Mining District were extremely hydrous and thus originated from great depth. Indeed, their major element compositions and reconstructed H2O and S contents agree well with experimentally observed and numerically predicted compositions of residual silicate melts after 50–70 wt% crystallization of ordinary arc basalts at high pressure and high oxygen fugacities.

New Mexico↗

USGS2025

Multi-scale geophysical imaging of a hydrothermal system in Yellowstone National Park, USA

Little is known about the local plumbing systems that fuel Yellowstone’s famous hot springs, geysers and mud pots. A multi-method, multi-scale geophysical investigation was carried out in the Obsidian Pool Thermal Area (OPTA) to: (i) delineate the lateral extent of the hydrothermal area and associated surface features; (ii) estimate the dimensions of the upflow zone and identify its main controlling structures; (iii) assess fluids circulation pathways from depth to surface. Ground and airborne geophysical data were acquired to connect local and regional scales, from shallow to large depths. Maps of surface electrical resistivity show a strong correlation with hydrothermal features. At in-termediate depths, electrical resistivity permits delineating the upper limit of the upflow zone, while Poisson’s ratio highlights differences in subsurface fluid content. Combining these results with surface observations and topographic information, we speculate that differential mixing of hydrothermal and fresh water could explain the wide diversity of features observed at OPTA. Low electrical resistivity observed at large depths also suggest that a vast upflow zone, controlled by rhyolite flows and conjugate faults, underlies the OPTA. We speculate that hydrothermal fluids rise along fractures and reach the surface in topographic lows to form hydrothermal features. Our results show that synoptic, multi-scale geophysical measurements provide a roadmap for understanding where and how geologic heterogeneity, topography, fluid-gas separation, and the mixing of thermal and meteoric waters conspire to produce the wide variety of Yellowstone’s renowned hydrothermal features.

Wyoming↗

USGS2018

Divisions of geologic time—Major chronostratigraphic and geochronologic units

Introduction Effective communication in the geosciences requires a consistent nomenclature for stratigraphic units and, especially, for divisions of geologic time. A geologic time scale is composed of standard stratigraphic divisions based on rock sequences and is calibrated in years. Geologists from the U.S. Geological Survey (USGS), State geological surveys, academia, and other organizations require a consistent time scale to be used in communicating ages of geologic units in the United States. Many international debates have occurred over names and boundaries of units, and various time scales have been used by the geoscience community. For consistent usage of time terms, the USGS Geologic Names Committee and the Association of American State Geologists developed the Divisions of Geologic Time ; the 2018 update in this fact sheet contains the unit names and boundary age estimates ratified by the International Commission on Stratigraphy in 2018. Scientists may use other published time scales, provided that these are specified and referenced.

Fact Sheet↗

USGS2026

Compact seismicity bursts have different characteristics from regional seismicity

Earthquakes tend to cluster, developing into sequences driven by stress perturbations and transient fault-zone processes. Depending on the driving process, earthquake sequences show differing behaviors. This variability challenges our ability to observe or distinguish these driving processes in high resolution. Here we systematically identify seismicity bursts throughout southern California using new statistical methods and examine their causes with other independent geophysical observations. Seismicity bursts are defined as statistically significant seismicity rate anomalies. Our approach has the advantage of being data driven, depending on few earthquake occurrence assumptions. We find abundant seismicity bursts across southern California, most frequently occurring along the San Jacinto Fault and in the Salton Sea and Coso geothermal fields. These seismicity bursts are highly compact in space and time, often encompassed by a 5 km radius and have durations less than 10 hr. Many of the seismicity bursts have their largest earthquake near the beginning of the sequence, but the largest earthquake is usually not an obvious mainshock. We utilize a variety of independent geophysical data sets to analyze the characteristics of the seismicity bursts, finding that the seismicity bursts have low b-values, low spectral stress drops, and varied stress ratios compared to regional seismicity. These differences suggest that seismicity bursts are driven by transient processes acting frequently across fault networks.

California↗

USGS2024

A great tsunami earthquake component of the 1957 Aleutian Islands earthquake

The great 1957 Aleutian Islands earthquake ruptured ∼1200 km of the plate boundary along the Aleutian subduction zone and produced a destructive tsunami across Hawaiʻi. Early seismic and tsunami analyses indicated that large megathrust fault slip was concentrated in the western Aleutian Islands, but tsunami waves generated by slip in the west cannot explain the large observed runup in Hawaiʻi far to the southeast. Recently mapped 1957 geologic deposits on eastern Aleutian Islands suggest occurrence of very large nearby slip. Jointly modeling tsunami runup along the eastern Aleutian and Hawaiian Islands together with tide gauge recordings across the Pacific resolves 12-26 m shallow slip along 600 km of the eastern Aleutian Islands in addition to modest, deeper western slip inferred from seismic records. The eastern near-trench slip results in an M W 8.3-8.6 tsunami earthquake component of the M W 8.6-8.8 rupture, comparable in size to the adjacent 1946 Aleutian tsunami earthquake to the east. The reexamination of the 1957 rupture confirms the tsunami hazards posed by the eastern Aleutian subduction zone to Hawaiʻi and lays the groundwork for investigation of large prehistoric earthquakes through modeling tsunami runup inferred from stratigraphic observations to constrain their rupture processes.

Alaska↗