Geology ReportsSearch

SEARCH · Geology Reports

Results for “Geophysical Prospecting”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8Linked to original sources

Geological studies of the COST nos. G-1 and G-2 wells, United States North Atlantic outer continental shelf

The COST Nos. G-1 and G-2 wells (fig. 1) are the second and third deep stratigraphic test wells drilled in the North Atlantic Outer Continental Shelf of the United States. COST No. G-1 was drilled in the Georges Bank basin to a total depth of 16,071 ft (4,898 m). G-1 bottomed in phyllite, slate, and metaquartzite overlain by weakly metamorphosed dolomite, all of Cambrian age. From approximately 15,600 to 12,400 ft (4,755 to 3,780 m) the strata are Upper Triassic(?), Lower Jurassic(?), and Middle Jurassic, predominantly red shales, sandstones, and conglomerates. Thin, gray Middle Jurassic beds of shale, sandstone, limestone, and dolomite occur from 12,400 to 9,900 ft (3,780 to 3,018 m). From 9,900 to 1,030 ft (3,018 to 314 m) are coarse-grained unconsolidated sands and loosely cemented sandstones, with beds of gray shale, lignite, and coal. The microfossils indicate the rocks are Upper Jurassic from 10,100 ft (3,078 m) up to 5,400 ft (1,646 m) and Cretaceous from that depth to 1,030 ft (314 m). No younger or shallower rocks were recovered in the drilling at the COST No. G-1 site, but an Eocene limestone is inferred to be disconformable over Santonian strata. The Jurassic strata of the COST No. G-1 well were deposited in shallow marine, marginal marine, and nonmarine environments, which changed to a dominantly shallow marine but still nearshore environment in the Cretaceous. The COST No. G-2 well was drilled 42 statute miles {68 km) east of the G-1 site, still within the Georges Bank basin, to a depth of 21,874 ft (6,667 m). The bottom 40 ft (12 m) of salt and anhydrite is overlain by approximately 7,000 ft {2,134 m) of Upper Triassic{?), Lower Jurassic{?) and Middle Jurassic dolomite, limestone, and interbedded anhydrite from 21,830 to 13,615 ft (6,654 to 4,153 m). From 13,500 to 9,700 ft (4,115 to 2,957 m) are Middle Jurassic limestones with interbedded sandstone. From 9,700 to 4,000 ft (2,957 to 1,219 m) are Upper Jurassic and Cretaceous interbedded sandstones and limestones overlain by Upper Cretaceous unconsolidated sands, sandstones, and calcareous shales. Pliocene, Miocene, Eocene, and Paleocene strata are disconformable over Santonian rocks; uppermost Cretaceous rocks are missing at this site, as at G-1. The sedimentary rocks in the COST No. G-2 well were deposited in somewhat deeper water, farther away from sources of terrigenous material than those at G-l, but still in marginal marine to shallow marine environments. Data from geophysical logs and examination of conventional cores, wellcuttings, and sidewall cores show that below 10,000 ft {3,048 m), the strata in both wells have moderate porosities {< 20 percent) and low to moderate permeabilities {< 100 mD) and are thus considered adequate to poor reservoir rocks. Above 10,000 ft (3,000 m) the porosities range from 16 to 39 percent, and the permeabilities are highly variable, ranging from 0.01 to 7,100 mD. Measurements of vitrinite reflectance, color alteration of visible organic matter, and various organic geochemical properties suggest that the Tertiary and Cretaceous strata of the COST Nos. G-1 and G-2 are not prospective for oil and gas. These sediments have not been buried deeply enough for hydrocarbon generation, and the kerogen and extractable organic matter in them are thermally immature. However, the Jurassic rocks at the G-1 site do contain small amounts of thermally mature gas-prone kerogens. The Jurassic rocks at COST No. G-2 are also gas-prone and are slightly richer in organic carbon and total extractable hydrocarbons than the G-1 rocks, but both sites have only poor to fair oil and gas source-rock potential.

Circular

Groundwater prospecting using a multi-technique framework in the lower Casas Grandes Basin, Chihuahua, México

Groundwater is a strategic resource for economic development, social justice, environmental sustainability, and water governance. The lower Casas Grandes River Basin, located in the state of Chihuahua, México, is in a semi-arid region with increasing groundwater demand and regional challenges such as drought and depletion of aquifers. Even though there is official information about the availability of groundwater, a comprehensive aquifer characterization requiring an interdisciplinary investigation using a diverse suite of tools and multiple data sources has yet to be carried out. This study presents a multi-technique framework to evaluate potential sites to drill for groundwater resources and reduce the risk of unsuccessful drilling. The main components of the methodology include wellhead leveling correction with a differential global positioning survey to define piezometric levels, principal component analysis using LANDSAT-8 images, application of geospatial tools, geophysics analysis using time domain electromagnetic surveys (TDES) and vertical electric soundings (VES), and structural geohydrology to define aquifer characteristics. The results showed that using the proposed framework steps improved the possibility of identifying subsurface layers with lower resistivity values that could be related to groundwater. Low resistivity values (35 Ohm-m) were found at depths from 50 to 85 m at sites where the regional static water level reached a depth of 245 m, indicating the potential location of a shallow groundwater resource at a site where the intersection of a fracture trace was identified. This procedure can be used in other regions in the world where limited information is available for groundwater exploration, thus reducing the risk of drilling dry wells in complex hydrogeological environments.

Lower Casas Grandes Basin, Chihuahua

Summary of references to mineral occurrences (other than mineral fuels and construction materials) in the Gulkana Quadrangle, Alaska

These summaries of references are designed to aid in library research on metallic and nonmetallic (other than mineral fuels and construction materials) mineral occurrences in the Gulkana quadrangle, Alaska. All references to most reports of the Geological Survey, the U.S. Bureau of Mines, and the State of Alaska Division of Geological and Geophysical Surveys and its predecessor State and Territorial agencies released before June 1, 1979, are summarized. Certain, mainly statistical, reports such as the Annual Minerals Yearbook of the U.S. Bureau of Mines and the biennial and annual reports of the State of Alaska Division of Geological and Geophysical Surveys and its predecessor agencies are not included. Also not included are data on many claims about which little more than their locations is known (for example, some of those in MacKevett and Holloway, 1977 (OF 77-169A), p. 20). These omissions should not be interpreted as a judgement on my part that the claims are not valid mineral occurrences, but only that there are insufficient data to describe any mineral deposit that might be present. This report is divided into three parts: a section made up of summaries of references arranged alphabetically by occurrence name; a section that lists synonyms for names in the first section, the names of operators and owners of mines and prospects, and claim names; and a section that lists, by author, all references summarized in the first section or mentioned in intruductory remarks.

Alaska

Geologic map of the Kechumstuk fault zone in the Mount Veta area, Fortymile mining district, east-central Alaska

This map was developed by the U.S. Geological Survey Mineral Resources Program to depict the fundamental geologic features for the western part of the Fortymile mining district of east-central Alaska, and to delineate the location of known bedrock mineral prospects and their relationship to rock types and structural features. This geospatial map database presents a 1:63,360-scale geologic map for the Kechumstuk fault zone and surrounding area, which lies 55 km northwest of Chicken, Alaska. The Kechumstuk fault zone is a northeast-trending zone of faults that transects the crystalline basement rocks of the Yukon-Tanana Upland of the western part of the Fortymile mining district. The crystalline basement rocks include Paleozoic metasedimentary and metaigneous rocks as well as granitoid intrusions of Triassic, Jurassic, and Cretaceous age. The geologic units represented by polygons in this dataset are based on new geologic mapping and geochronological data coupled with an interpretation of regional and new geophysical data collected by the Alaska Department of Natural Resources, Division of Geological and Geophysical Surveys. The geochronological data are reported in the accompanying geologic map text and represent new U-Pb dates on zircons collected from the igneous and metaigneous units within the map area.

Alaska

Summary of references to mineral occurrences (other than mineral fuels and construction materials) in the Mount McKinley Quadrangle, Alaska

These summaries of references are designed to aid in library research on metallic and nonmetallic (other than mineral fuels and construction materials) mineral occurrences in the Mount McKinley quadrangle, Alaska. All references to most reports of the Geological Survey, the U.S. Bureau of Mines, and the State of Alaska Division of Geological and Geophysical Surveys and its predecessor State and Territorial agencies released before November 1, 1979, are summarized. Certain, mainly statistical, reports such as the annual Mineral Yearbook of the U.S. Bureau of Mines and the biennial and annual reports of the State of Alaska Division of Geological and Geophysical Surveys and its predecessor State and Territorial agencies are not included. Also not included are data on many claims about which little more than their locations is known (for example, MacKevett and Holloway, 1977 (OF 77-169A), p. 48). These omissions should not be interpreted as a judgment on my part that the claims are not valid mineral occurrences, but only that there are insufficient data to describe any mineral deposit that might be present. This report is divided into three parts: a section made up of summaries of references arranged alphabetically by occurrence name; a section that lists synonyms for names in the first section, claim names, and the names of operators and owners of mines and prospects; and a section that lists, by author, all references summarized in the first section and in these introductory paragraphs.

Alaska

Summary of references to mineral occurrences (other than mineral fuels and construction materials) in the Seldovia Quadrangle, Alaska

These summaries of references are designed to aid in library research on metallic and nonmetallic (other than mineral fuels and construction materials) mineral occurrences in the Seldovia quadrangle, Alaska. All references to most reports of the Geological Survey, the U.S. Bureau of Mines, and the State of Alaska Division of Geological and Geophysical Surveys and its predecessor State and Territorial agencies released before September 1, 1979, are summarized. Certain, mainly statistical, reports such as the annual Mineral Yearbook of the U.S. Bureau of Mines and the biennial and annual reports of the State of Alaska Division of Geological and Geophysical Surveys and its predecessor State and Territorial agencies are not included. Also not included are data on many claims about which little more than their locations is known (for example, MacKevett and Holloway, 1977 (OF 77-169A), p. 55). These omissions should not be interpreted as a judgment on my part that the claims are not valid mineral occurrences, but only that there are insufficient data to describe any mineral deposit that might be present. This report is divided into three parts: a section made up of summaries of references arranged alphabetically by occurrence name; a section that lists synonyms for names in the first section, claim names, and the names of operators and owners of mines and prospects; and a section that lists, by author, all references summarized in the first section and in these introductory paragraphs.

Alaska

Preliminary results of spectral induced polarization measurements, Wadi Bidah District, Kingdom of Saudi Arabia

Laboratory spectral induced polarization (SIP) measurements on 29 carbonaceous schist samples from the Wadi Bidah district show that most are associated with very long polarization decays or, equivalently, large time constants. In contrast, measurements on two massive sulfide samples indicate shorter polarization decays or smaller time constants. This difference in time constants for the polarization process results in two differences in the phase spectra in the frequency range of from 0.06 to 1Hz. First, phase values of carbonaceous rocks generally decrease as a function of increasing frequency. Second, phase values of massive sulfide-bearing rocks increase as a function of increasing frequency. These results from laboratory measurements agree well with those from other reported SIP measurements on graphites and massive sulfides from the Canadian Shield. Four SIP lines, measured by using a 50-m dipole-dipole array, were surveyed at the Rabathan 4 prospect to test how well the results of laboratory sample measurements can be applied to larger scale field measurements. Along one line, located entirely over carbonaceous schists, the phase values decreased as a function of increasing frequency. Along a second line, located over both massive sulfides and carbonaceous schists as defined by drilling, the phase values measured over carbonaceous schists decreased as a function of increasing frequency, whereas those measured over massive sulfides increased. In addition, parts of two lines were surveyed down the axes of the massive sulfide and carbonaceous units. The phase values along these lines showed similar differences between the carbonaceous schists and massive sulfides. To date, the SIP survey and the SIP laboratory measurements have produced the only geophysical data that indicate an electrical difference between the massive sulfide-bearing rocks and the surrounding carbonaceous rocks in the Wadi Bidah district. However, additional sample and field measurements in areas of known mineralization would fully evaluate the SIP method as applied to various geologic environments and styles of massive sulfide mineralization. Additionally, the efficiency of SIP surveys in delineating areas of sulfide mineralization might be improved by surveying lines down the axes of known electrical conductors. An evaluation of the applied research done on the SIP method to date suggests that this technique offers significant exploration applications to massive sulfide exploration in the Kingdom of Saudi Arabia.

Open-File Report

The use of Schlumberger and equatorial soundings in groundwater investigations near El Paso, Texas

Electrical soundings using the symmetric AMNB Schlumberger and the bipole-dipole equatorial arrays were made along two profiles near El Paso, Texas, in support of a groundwater exploration program which included seismic refraction and gravity surveys. Electrode spacings (AB/2 or R) reaching 12,000 ft allowed exploration to depths of about 7000 ft. Geoelectrical information on the subsurface materials was augmented by sounding with the bilateral equatorial configuration and by transforming Schlumberger curves into dipole-polar sounding curves with formulas developed by Al'pin and by Tsekov. The bilateral equatorial sounding curves were found useful for detecting the direction of dip of highly resistive bedrocks whereas transformed sounding curves were used to evaluate the average longitudinal resistivity, and hence the depth, to the "electric basement." A few of the Schlumberger sounding curves were either clearly or subtly distorted by nonhorizontal geologic structures. The interpretation of these sounding curves illustrates the requirement for careful analysis in processing electrical prospecting data obtained over complex geologic conditions. The interpretation of a combined Schlumberger-equatorial sounding curve, which did not agree with the preliminary interpretation of seismic refraction data, was confirmed to be correct by data from a test well drilled to a depth of 4363 ft. The application of electrical sounding data in the El Paso area furnished valuable information on the depth to fresh-water-saltwater interfaces and on the depth to highly resistive impervious bedrocks.

Texas

Hydrogeology and water quality of the Leetown area, West Virginia

The U.S. Geological Survey’s Leetown Science Center and the co-located U.S. Department of Agriculture’s National Center for Cool and Cold Water Aquaculture both depend on large volumes of cold clean ground water to support research operations at their facilities. Currently, ground-water demands are provided by three springs and two standby production wells used to augment supplies during periods of low spring flow. Future expansion of research operations at the Leetown Science Center is dependent on assessing the availability and quality of water to the facilities and in locating prospective sites for additional wells to augment existing water supplies. The hydrogeology of the Leetown area, West Virginia, is a structurally complex karst aquifer. Although the aquifer is a karst system, it is not typical of most highly cavernous karst systems, but is dominated by broad areas of fractured rock drained by a relatively small number of solution conduits. Characterization of the aquifer by use of fluorometric tracer tests, a common approach in most karst terranes, therefore only partly defines the hydrogeologic setting of the area. In order to fully assess the hydrogeology and water quality in the vicinity of Leetown, a multi-disciplinary approach that included both fractured rock and karst research components was needed. The U.S. Geological Survey developed this multi-disciplinary research effort to include geologic, hydrologic, geophysical, geographic, water-quality, and microbiological investigations in order to fully characterize the hydrogeology and water quality of the Leetown area, West Virginia. Detailed geologic and karst mapping provided the framework on which hydrologic investigations were based. Fracture trace and lineament analysis helped locate potential water-bearing fractures and guided installation of monitoring wells. Monitoring wells were drilled for borehole geophysical surveys, water-quality sampling, water-level measurements, and aquifer tests to characterize the quality of water and the hydraulic properties of the aquifer. Surface geophysical surveys provided a 3-dimensional view of bedrock resistivity in order to assess geologic and lithologic controls on ground-water flow. Borehole geophysical surveys were conducted in monitoring wells to assess the storage and movement of water in subsurface fractures. Numerous single-well, multi-well, and straddle packer aquifer tests and step-drawdown tests were conducted to define the hydraulic properties of the aquifer and to assess the role of bedrock fractures and solution conduits in the flow of ground water. Water samples collected from wells and springs were analyzed to assess the current quality of ground water and provide a baseline for future assessment. Microbiological sampling of wells for indicator bacteria and human and animal DNA provided an analysis of agricultural and suburban development impacts on ground-water quality. Light detection and ranging (LiDAR) data were analyzed to develop digital elevation models (DEMs) for assessing sinkhole distribution, to provide elevation data for development of a ground-water flow model, and to assess the distribution of major fractures and faults in the Leetown area. The flow of ground water in the study area is controlled by lithology and geologic structure. Bedrock, especially low permeability units such as the shale Martinsburg Formation and the Conococheague Limestone, act as barriers to water flowing down gradient and across bedding. This retardation of cross-strike flow is especially pronounced in the Leetown area, where bedding typically dips at steep angles. Highly permeable fault and fracture zones that disrupt the rocks in cross-strike directions provide avenues through which ground water can flow laterally across or through strata of low primary permeability. Significant strike parallel thrust faults and cross-strike faults typically coincide with larger solution conduits and act as drains for the more pervasive network of interconnected diffuse fractures. Results of borehole geophysical surveys indicate that although numerous fractures may intersect a borehole, only one or two of the fractures typically transmit most of the water to a well. The diffuse-flow dominated network of fractures that provides the majority of storage occupies only a small proportion of the total aquifer volume but constitutes the majority of porosity within the aquifer. Solution conduits, while occupying a relatively small volume of the overall aquifer, are especially important because they serve as primary drains for the ground-water flow system. Surface resistivity maps and cross-sectionsshow anomalous areas of low resistivities coincident with the prevailing geologic strike at N. 20º E., with major cross-strike faults, and with major springs in the region. Transmissivity derived from straddle packer tests was highly variable, and ranged over three orders of magnitude (1.8 x 10 -6 to 5.9 x 10 -3 ft 2 /d) in diffuse-flow fractures. A similar large variability in transmissivity was documented by single- and multi-well aquifer tests conducted in conduit-flow dominated portions of the aquifer (2.0 x 10 3 to 1.4 x 10 4 ft 2 /d) in lowland areas immediately adjacent to the Leetown Science Center. A stream-gaging station installed on Hopewell Run near the point where the stream exits the Leetown watershed indicates average daily streamflow for the Hopewell Run of approximately 11.2 ft 3 /s, and ranged from a minimum of 1.80 ft 3 /s on September 28, 2005, to a maximum of 73.0 ft 3 /s on December 11, 2003. Base-flow (ground-water) discharge surveys identified numerous small seeps adjacent to streams in the area. Hydrographs of the stage of Balch Spring show rapid response to individual storms. Strong correlation of the flow of Hopewell Run and Balch Spring indicates the nearby losing stream reach is partly responsible for higher fluctuations in the stage of Balch Spring. A water budget for the study period (2003-2005), based on measured precipitation and hydrograph analyses, is expressed as Precipitation (38.60 in/yr) = Surface Runoff (1.36 in/yr) + Ground-Water Discharge (17.73 in/yr) + Evapotranspiration (24.23 in/yr) – Change in storage (4.72 in/yr). Flow of ground water through the epikarst, a shallow zone of intensely weathered rock and regolith, can be rapid (on the order of days or weeks) as flow is concentrated in solution conduits. Flow within the intermediate and deeper zones is typically much slower. Eight dye-tracer tests conducted in the Leetown area found ground-water flow patterns to be divergent, with velocities ranging from about 12.5 to 610 ft/day and a median velocity of 50 ft/day. Estimates of ground-water age in carbonate rocks in the region are on the order of 15 years in the shallower portions of the aquifer to 50 years or older for deeper portions of the aquifer. Shallow springs can have a significant component of fairly young water (< 5 years in age). Ground-water samples collected from 16 sites (12 wells and 4 springs) in the Leetown area were analyzed for more than 340 constituents. Only turbidity, indicator bacteria, and radon were typically present in concentrations exceeding U.S. Environmental Protection Agency (USEPA) drinking-water or aquatic life standards.

West Virginia

Controls on mineralisation in the Sierra Foothills gold province, central California, USA: A GIS-based reconnaissance prospectivity analysis

The assessment of spatial relationships between the location, abundance and size of orogenic-gold deposits in the highly endowed Sierra Foothills gold province in California, via the combination of field studies and a GIS-based analysis, illustrates the power of such an approach to the characterisation of important parameters of mineral systems, and the prediction of districts likely to host economic mineralisation. Regional- to deposit-scale reconnaissance mapping suggests that deposition of gold-bearing quartz veins occurred in second- and third-order, east-over-west thrusts during regional east - west compression and right-lateral transpression. At the district-scale, significant zones of mineralisation correspond with such transpressional reactivation zones and dilational jogs that developed during the Late Jurassic - Early Cretaceous along the misaligned segments of first-order faults throughout the Sierra Nevada Foothills Metamorphic Belt. Field-based observations and interpretation of GIS data (including solid geology, structural elements, deposit locations, magnetics, gravity) also highlight the importance of structural permeability contrasts, rheological gradients, and variations in fault orientation for localising mineralisation. Although this approach confirms empirical findings and produces promising results at the province scale, enhanced geological, structural, geophysical and geochronological data density is required to generate regionally consistent, high-quality input layers that improve predictive targeting at the goldfield to deposit-scale.

Australian Journal of Earth Sciences

Summaries of data on and lists of references to metallic and selected nonmetallic mineral deposits in the Talkeetna Mountains Quadrangle, Alaska

These summaries of data on metallic and selected nonmetallic mineral occurrences and lists of selected references to them in Geological Survey, U.S. Bureau of Mines, and State of Alaska Division of Geological and Geophysical Surveys (and predecessor State agencies) reports and maps are designed to aid in library research on the mineral resources of the Talkeetna Mountains quadrangle, Alaska. The references listed are selected in the sense that mainly statistical reports such as the annual Minerals Yearbook of the U.S. Bureau of Mines and many annual and biennial reports of the Alaska Division of Geological and Geophysical Surveys and its predecessor agencies are not included. Also not included are data on many claims about which little more than their locations is known (for example, localities 3 and 6 in Csejtey and Miller, 1978 (OF 78- 558B)). These omissions should not be interpreted as a judgement that the claims are not on valid mineral occurrences, but only that there are insufficient data to describe any mineral deposit that might be present. Geochemical anomalies determined by analyses of rock and stream—sediment samples in which no metallic mineral was identified are also omitted. This report is divided into three parts: a section made up of summaries of data and reference lists arranged alphabetically by occurrence name; a second section that lists synonyms for names in the first section and the names of owners and operators of mines and prospects; and a final section that lists alphabetically by author all references mentioned in the first section and in these introductory paragraphs.

Alaska

Tungsten skarn quantitative mineral resource assessment and gold, rare earth elements, graphite, and uranium qualitative assessments of the Kuldjuktau and Auminzatau Ranges, in the central Kyzylkum region, Uzbekistan

A new quantitative mineral resource assessment for tungsten skarn was conducted for the Auminzatau and Kuldjuktau mountain ranges in Central Uzbekistan, along with qualitative assessments of orogenic gold, rare earth elements (REEs), amorphous graphite, and uranium. By integrating a variety of geological, geochemical, geophysical, and remote sensing data sets, estimates of undiscovered tungsten skarn deposits in permissive tracts are combined with grade and tonnage distributions of known deposits to generate probabilistic estimates of undiscovered resources. Undiscovered deposits in Auminzatau are estimated to contain median resources of 98 thousand metric tons (kt) of WO 3 with a 70 percent (%) probability of at least 28 kt and a 10% probability of at least 468 kt, of which 16 kt to 293 kt may be economic to extract. In Kuldjuktau, the undiscovered deposits are estimated to contain median resources of 27 kt of WO 3 with a 60% probability of at least 12 kt and a 10% probability of at least 208 kt, of which 5 kt to 132 kt may be economic to extract. Our results suggest that the Auminzatau–Kuldjuktau Mountains area is highly prospective for additional discovery of significant Au and U resources and has low prospectivity for discovery of significant REE and graphite resources.

Minerals

Developing, testing, and communicating earthquake forecasts: Current practices and future directions

While deterministically predicting the time and location of earthquakes remains impossible, earthquake forecasting models can provide estimates of the probabilities of earthquakes occurring within some region over time. To enable informed decision-making of civil protection, governmental agencies, or the public, Operational Earthquake Forecasting (OEF) systems aim to provide authoritative earthquake forecasts based on current earthquake activity in near-real time. Establishing OEF systems involves several nontrivial choices. This review captures the current state of OEF worldwide and analyzes expert recommendations on the development, testing, and communication of earthquake forecasts. An introductory summary of OEF-related research is followed by a description of OEF systems in Italy, New Zealand, and the United States. Combined, these two parts provide an informative and transparent snapshot of today's OEF landscape. In Section 4, we analyze the results of an expert elicitation that was conducted to seek guidance for the establishment of OEF systems. The elicitation identifies consensus and dissent on OEF issues among a non-representative group of 20 international earthquake forecasting experts. While the experts agree that communication products should be developed in collaboration with the forecast user groups, they disagree on whether forecasting models and testing methods should be user-dependent. No recommendations of strict model requirements could be elicited, but benchmark comparisons, prospective testing, reproducibility, and transparency are encouraged. Section 5 gives an outlook on the future of OEF. Besides covering recent research on earthquake forecasting model development and testing, upcoming OEF initiatives are described in the context of the expert elicitation findings.

Reviews of Geophysics

Electrical structure of Newberry Volcano, Oregon

From the interpretation of magnetotelluric, transient electromagnetic, and Schlumberger resistivity soundings, the electrical structure of Newberry Volcano in central Oregon is found to consist of four units. From the surface downward, the geoelectrical units are (1) very resistive, young, unaltered volcanic rock, (2) a conductive layer of older volcanic material composed of altered tuffs, (3) a thick resistive layer thought to be in part intrusive rocks, and (4) a lower-crustal conductor. This model is similar to the regional geoelectrical structure found throughout the Cascade Range. Inside the caldera, the conductive second layer corresponds to the steep temperature gradient and alteration minerals observed in the USGS Newberry 2 test hole. Drill hole information on the south and north flanks of the volcano (test holes GEO N-1 and GEO N-3, respectively) indicates that outside the caldera the conductor is due to alteration minerals (primarily smectite) and not high-temperature pore fluids. On the flanks of Newberry the conductor is generally deeper than inside the caldera, and it deepens with distance from the summit. A notable exception to this pattern is seen just west of the caldera rim, where the conductive zone is shallower than at other flank locations. The volcano sits atop a rise in the resistive layer, interpreted to be due to intrusive rocks. The intrusive material has served as a heat source to produce enhanced hydrothermal alteration and, perhaps in the case of the west-flank anomaly, elevated fluid temperatures. While no public drill hole information is available to confirm this hypothesis, the west-flank anomaly appears to be a good geothermal target. In addition to the possibility that a region on the west side of the volcano could be favorable for prospecting, part of the resistive structure under the center of the volcano could be due to a vapor-dominated environment with temperatures above 300°C. In other parts of the Cascades, pervasive alteration has produced mixed layer clays and zeolites, resulting in low-resistivity anomalies. Low resistivities cannot be assumed to indicate high-temperature pore fluids. The use of electrical methods that measure resistivity as a function of excitation frequency, such as spectral induced polarization, may provide a way of obtaining information about the type and extent of alteration.

Journal of Geophysical Research Solid Earth

Geologic appraisal of the petroleum potential of offshore southern California; the borderland compared to onshore coastal basins

Offshore southern California is part of a much larger Pacific continental margin, and the two areas have a similar geologic history at least as far back as middle Tertiary time. Assessment of the petroleum potential of the offshore Southern California borderland is accomplished by examining the adjacent highly explored productive coastal basins in the tectonically unstable area west of the San Andreas fault. Known oil and gas accumulations in this region can be characterized as follows: 88 percent comes from the Los Angeles and Ventura basins; 87 percent has been found in late Miocene and younger strata and only 0.2 percent has been found in Eocene strata; 80 percent has been found in thick deposits of deep-water turbidite reservoirs; and 5 percent has been found in fractured Miocene siliceous shale reservoirs. The percentage of siliceous shale reservoirs will increase as a result of recent discoveries in this rock type in the Santa Barbara Channel. Of the 212 known fields only 5 are giants (greater than 500 million barrels), and these fields account for 52 percent of all past production from the region. Most fields are faulted anticlines, and the largest fields have the highest oil recoveries per acre. Geologic knowledge of the offshore is limited by the availability of data. Data have been obtained from geophysical surveys, analyses of bedrock samples from the sea floor, and extrapolations of data from the mainland and offshore islands. Several factors have a negative effect on the assessment of the petroleum potential of the southern California borderland. They are: 1. The Neogene section is relatively thin, and the Paleogene section is thin and has a limited distribution. 2. Over large areas, Miocene sediments apparently rest directly on basement. 3. Along much of the Santa Rosa-Cortes Ridge, sediments are uplifted and truncated, exposing Paleogene rocks. 4. Organic content in Paleogene sediments is believed too low to generate large amounts of petroleum. 5. Source rocks are immature, even in sediments as old as Eocene. 6. Burial and thermal history are insufficient for the generaton of hydrocarbons over much of the borderland area. 7. Documented oil and gas seeps are unknown seaward of the Channel Islands. 8. Limited exploratory drilling nearshore, the best prospective area, has not been favorable. 9. Adequate or thick reservoirs of deep-water turbidire origin are not evident. These negative factors are partly offset by the following positive factors: 1. Miocene sediments are excellent potential source rocks. 2. Asphaltic oil in rocks of Monterey-type lithology may be generated at lower than normal temperatures. 3. Shallow-water sands of reservoir quality possibly are present in the uppermost Paleogene and lowermost Neogene section. 4. Potential structural traps may be analogous to major structural producing trends onshore. 5. Fractured shale reservoirs may be present along flanks of major banks and ridges. 6. Buried and unsampled Paleogene and Late Cretaceous sediments may be better source rocks than those sampled and measured. The southern California borderland, although a part of a locally rich petroliferous region, has no known basins with geologic histories or characteristics similar to the Los Angeles and Ventura basins. Some offshore basins are similar to less endowed basins in terms of petroleum potential such as the Santa Maria and Salinas basins. Areas with the best petroleum potential may be in deep water (greater than 500 m). Some of the past high estimates of the petroleum potential may have been overstated; the existing geologic data tend to substantiate low estimates of 0.6 to 5.8 billion barrels of oil and 0.6 to 5.8 trillion ft3 of gas for the southern California borderland at the 5 and 95 percent probability level.

Circular

Sandstone copper assessment of the Chu-Sarysu Basin, Central Kazakhstan: Chapter E in Global mineral resource assessment

Mineral resource assessments represent a synthesis of available information to estimate the location, quality, and quantity of undiscovered mineral resources in the upper part of the Earth&rsquo;s crust. This report presents a probabilistic mineral resource assessment of undiscovered sandstone copper deposits within the late Paleozoic Chu-Sarysu Basin in central Kazakhstan by the U.S. Geological Survey as a contribution to a global assessment of mineral resources. The purposes of this study are to: (1) provide a database of known sandstone copper deposits and significant prospects in this area, (2) delineate permissive areas (tracts) for undiscovered sandstone copper deposits within 2 km of the surface at a scale of 1:1,000,000, (3) estimate numbers of undiscovered deposits within these permissive tracts at several levels of confidence, and (4) provide probabilistic estimates of amounts of copper (Cu), silver (Ag), and mineralized rock that could be contained in undiscovered deposits within each tract. The assessment uses the three-part form of mineral resource assessment based on mineral deposit models (Singer, 1993; Singer and Menzie, 2010). Delineation of permissive tracts for resources is based on the distribution of a Carboniferous oxidized nonmarine clastic (red bed) stratigraphic sequence that lies between overlying Permian and underlying Devonian evaporite-bearing sequences. Subsurface information on the extent and depth of this red bed sequence and structural features that divide the basin into sub-basins was used to define four permissive tracts. Structure contour maps, mineral occurrence databases, drill hole lithologic logs, geophysical maps, soil geochemical maps, locations of producing gas fields, and evidence for former gas accumulations were considered in conjunction with descriptive deposit models and grade and tonnage models to guide the assessment team&rsquo;s estimates of undiscovered deposits in each tract. The four permissive tracts are structural sub-basins of the Chu-Sarysu Basin and range in size from 750 to 65,000 km&sup2;. Probabilistic estimates of numbers of undiscovered sandstone copper deposits were made for the four tracts by a group of experts. Using these probabilistic estimates, Monte Carlo simulation was used to estimate the amount of metal contained within each tract. The results of the simulation serve as the basis for estimates of the metal endowment. The team estimates that 26 undiscovered deposits occur within the Chu-Sarysu Basin, and that these deposits contain an arithmetic mean of at least 21.5 million metric tons (Mt) of copper and 21,900 metric tons (t) of silver. The undiscovered deposits are in addition to the 7 known deposits that contain identified resources of 27.6 Mt of copper. Sixty percent of the estimated mean undiscovered copper resources are associated with the two permissive tracts that contain the identified resources; the remaining estimated resources are associated with the two tracts that have no known deposits. For the three tracts that contain 95 percent of the estimated undiscovered copper resources, the probability that each tract contains its estimated mean or more is about 40 percent. For the tract with 5 percent of the estimated undiscovered cop-per resources, the probability that it contains that amount or more is 25 percent.

Chu-Sarysu Basin

The influence of pre-existing structures on geothermal springs: Inferences from potential field mapping in Surprise Valley, CA and other sites In the northwestern Great Basin

Surprise Valley, located in the northwestern Great Basin, is an asymmetric extensional basin that marks a major tectonic transition between the relatively un-extended volcanic Modoc Plateau to the west, and the Basin and Range to the east that has undergone 10-15% extension. In addition, it sits just north of the Walker Lane which accommodates up to 20% of dextral slip associated with Pacific-North American plate interactions. Thermal springs issue from eight areas within Surprise Valley. Most of these occur within the basin and are not situated on the main basin forming range-front faults. As a result, efforts to resolve the structural setting of the valley’s hydrothermal system have relied on geophysics to characterize basin structure and geology. Extensive efforts to map the basin with ground and airborne magnetics have revealed a >35 km-long linear, intra-basin magnetic high, interpreted as a buried dike swarm. Geothermal springs on the eastern side of the valley, including Seifert hot springs, Leonards hot springs, and Surprise Valley hot springs (SVHS), are all situated along the magnetic high and occur at local breaks and bends in the anomaly, suggesting that fracture permeability is enhanced along the feature and particularly at these discontinuities. Recent studies, including drilling over the anomaly near SVHS that likely intersected dike material, as well as subsequent mapping and sampling of dikes outcropping along the anomaly on the playa surface south of SVHS, confirm (as previously inferred) that mafic intrusives are the principal source of the anomaly. Similar interpretations made in two other valleys (in southern Oregon and northwestern Nevada), where inferred intra-basin dikes appear to be spatially correlated with hot springs or prospective geothermal resource areas, suggest that the impact of pre-existing basement structure on hydrothermal activity may pertain more generally to other hydrothermal settings throughout the Great Basin. If so, efforts to map basement may enhance understanding structural controls on some geothermal systems. Furthermore, similarities across these disparate sites suggest that magmatism may play a much larger role in accommodating extension and influencing basin evolution across the western Great Basin than previously recognized.

Conference Paper

Field guide to hydrothermal alteration in the White River altered area and in the Osceola Mudflow, Washington

The Cenozoic Cascades arcs of southwestern Washington are the product of long-lived, but discontinuous, magmatism beginning in the Eocene and continuing to the present (for example, Christiansen and Yeats, 1992). This magmatism is the result of subduction of oceanic crust beneath the North American continent. The magmatic rocks are divided into two subparallel, north-trending continental-margin arcs, the Eocene to Pliocene Western Cascades, and the Quaternary High Cascades, which overlies, and is east of, the Western Cascades. Both arcs are calc-alkaline and are characterized by voluminous mafic lava flows (mostly basalt to basaltic andesite compositions) and scattered large stratovolcanoes of mafic andesite to dacite compositions. Silicic volcanism is relatively uncommon. Quartz diorite to granite plutons are exposed in more deeply eroded parts of the Western Cascades Arc (for example, Mount Rainier area and just north of Mt. St. Helens). Hydrothermal alteration is widespread in both Tertiary and Quaternary igneous rocks of the Cascades arcs. Most alteration in the Tertiary Western Cascades Arc resulted from hydrothermal systems associated with small plutons, some of which formed porphyry copper and related deposits, including copper-rich breccia pipes, polymetallic veins, and epithermal gold-silver deposits. Hydrothermal alteration also is present on many Quaternary stratovolcanoes of the High Cascades Arc. On some High Cascades volcanoes, this alteration resulted in severely weakened volcanic edifices that were susceptible to failure and catastrophic landslides. Most notable is the sector collapse of the northeast side of Mount Rainier that occurred about 5,600 yr. B.P. This collapse resulted in formation of the clay-rich Osceola Mudflow that traveled 120 km down valley from Mount Rainier to Puget Sound covering more than 200 km2. This field trip examines several styles and features of hydrothermal alteration related to Cenozoic magmatism in the Cascades arcs. The morning of the trip will examine the White River altered area, which includes high-level alteration related to a large, early Miocene magmatic-hydrothermal system exposed about 10 km east of Enumclaw, Washington. Here, vuggy silica alteration is being quarried for silica and advanced argillic alteration has been prospected for alunite. Clay-filled fractures and sulfide-rich, fine-grained sedimentary rocks of hydrothermal origin locally are enriched in precious metals. Many hydrothermal features common in high-sulfidation gold-silver deposits and in advanced argillic alteration zones overlying porphyry copper deposits (for example, Gustafson and Hunt, 1975; Hedenquist and others, 2000; Sillitoe, 2000) are exposed, although no economic base or precious metal mineralized rock has been discovered to date. The afternoon will be spent examining two exposures of the Osceola Mudflow along the White River. The Osceola Mudflow contains abundant clasts of altered Quaternary rocks from Mount Rainier that show various types of hydrothermal alteration and hydrothermal features. The mudflow matrix contains abundant hydrothermal clay minerals that added cohesiveness to the debris flow and helped allow it to travel much farther down valley than other, noncohesive debris flows from Mount Rainier (Crandell, 1971; Vallance and Scott, 1997). The White River altered area is the subject of ongoing studies by geoscientists from Weyerhaeuser Company and the U.S. Geological Survey (USGS). The generalized descriptions of the geology, geophysics, alteration, and mineralization presented here represent the preliminary results of this study (Ashley and others, 2003). Additional field, geochemical, geochronologic, and geophysical studies are underway. The Osceola Mudflow and other Holocene debris flows from Mount Rainier also are the subject of ongoing studies by the USGS (for example, Breit and others, 2003; John and others, 2003; Plumlee and others, 2003, Sisson and others, 2003; Vallance and others, 2003). Studies of hydrothermal alteration in the Osceola Mudflow are being used to better understand fossil hydrothermal systems on Mount Rainier and potential hazards associated with this alteration.

Washington