Geology Reports⌕ Search

SEARCH · Geology Reports

Results for “Contribution”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,423 records · Page 79Linked to original sources

Alteration of basalt hyaloclastite at the off-axis Sea Cliff hydrothermal field, Gorda Ridge

The Sea Cliff hydrothermal field on the northern segment of the Gorda Ridge is situated along a rift-bounding normal fault about 2.6 km east of the neovolcanic zone and approximately 300 m above the spreading axis. The structural setting of this hydrothermal field differs from that of most other active seafloor hydrothermal sites investigated to date, which are typically situated in the neovolcanic zone. Mineralization occurs in basaltic talus covering a large normal-fault scarp. Hydrothermal crusts cover much of the seafloor in the area of the active hydrothermal field. These crusts form by extensive alteration of basaltic hyaloclastite in a zone of mixing between ascending hydrothermal fluid and entrained seawater. The initial stage of alteration is magnesian metasomatism of both crystalline basalt and basaltic glass, converting the rock to Mg-rich smectite and smectite/chlorite. Further alteration removes nearly all cations and ultimately leads to silicification. Preservation of basaltic texture in the silicified rocks provides evidence that even such sparingly soluble elements as A1 and Ti have been removed. Oxygen-isotopic ratios of the altered rocks constrain initial alteration to temperatures near 220°C, close to the maximum measured vent temperatures of 247°C. Silicification proceeded to much lower temperatures, and most amorphous silica deposition occurred at temperatures below 100°C. Sulfur-, strontium-, and lead-isotopic data all indicate a predominantly basaltic source, with important contributions from seawater but no significant contribution from sedimentary sources. Comparison with ophiolite-hosted massive sulfide deposits shows that the structural setting, alteration sequence, and depositional environment are all similar and suggests that mineralization and replacement of basaltic breccia in the Sea Cliff hydrothermal field likely occur in the subsurface beneath a capping layer of silicified hyaloclastite.

California, Oregon↗

Isotope geochemistry of recent magmatism in the Aegean arc: Sr, Nd, Hf, and O isotopic ratios in the lavas of Milos and Santorini-geodynamic implications

In this comparative study of variations in the isotopic compositions (Sr, Nd, O and Hf) of the calc-alkaline magmas of the largest two volcanoes, Milos and Santorini, of the Aegean arc (eastern Mediterranean) we demonstrate the complexity of the processes governing the evolution of the magmas on the scale both of the arc and of each volcano. On Santorini, the crustal contamination processes have been limited, effecting the magma gradually during its differentiation. The most differentiated lavas (rhyodacite and pumice) are also the most contaminated. On Milos, by contrast, these processes are very extensive. They are expressed in the 143 Nd/ 144 Nd vs. 87 Sr/ 86 Sr diagram as a continuous mixing curve between a mantle and a crustal end member pole defined by schists and metavolcanic rocks outcropping on these volcanoes. In contrast with Santorini, the least differentiated lavas on Milos are the most contaminated. These isotopic singularities can be correlated with the geodynamic evolution of the Aegean subduction zone, consisting of alternating tectonic phases of distension and compression. The genesis of rhyolitic magmas can be linked to the two phases of distension, and the contamination of the calc-alkaline mantle-derived magmas with the intermediate compressive phase. The isotopic characteristics of uncontaminated calc-alkaline primitive magmas of Milos and Santorini are directly comparable to those of magmas generated in subduction zones for which a contribution of subducted sediments to partial melts from the mantle is suggested, such as in the Aleutian, Sunda, and lesser Antilles island arcs. However, in spite of the importance of the sediment pile in the eastern Mediterranen oceanic crust (6–10 km), the contribution of the subducted terrigenous materials remains of limited amplitude.

Earth and Planetary Science Letters↗

Mechanical and hydraulic properties of rocks related to induced seismicity

Witherspoon, P.A. and Gale, J.E., 1977. Mechanical and hydraulic properties of rocks related to induced seismicity. Eng. Geol., 11(1): 23-55. The mechanical and hydraulic properties of fractured rocks are considered with regard to the role they play in induced seismicity. In many cases, the mechanical properties of fractures determine the stability of a rock mass. The problems of sampling and testing these rock discontinuities and interpreting their non-linear behavior are reviewed. Stick slip has been proposed as the failure mechanism in earthquake events. Because of the complex interactions that are inherent in the mechanical behavior of fractured rocks, there seems to be no simple way to combine the deformation characteristics of several sets of fractures when there are significant perturbations of existing conditions. Thus, the more important fractures must be treated as individual components in the rock mass. In considering the hydraulic properties, it has been customary to treat a fracture as a parallel-plate conduit and a number of mathematical models of fracture systems have adopted this approach. Non-steady flow in fractured systems has usually been based on a two-porosity model, which assumes the primary (intergranular) porosity contributes only to storage and the secondary (fracture) porosity contributes only to the overall conductivity. Using such a model, it has been found that the time required to achieve quasi-steady state flow in a fractured reservoir is one or two orders of magnitude greater than it is in a homogeneous system. In essentially all of this work, the assumption has generally been made that the fractures are rigid. However, it is clear from a review of the mechanical and hydraulic properties that not only are fractures easily deformed but they constitute the main flow paths in many rock masses. This means that one must consider the interaction of mechanical and hydraulic effects. A considerable amount of laboratory and field data is now available that clearly demonstrates this stress-flow behavior. Two approaches have been used in attempting to numerically model such behavior: (1) continuum models, and (2) discrete models. The continuum approach only needs information as to average values of fracture spacing and material properties. But because of the inherent complexity of fractured rock masses and the corresponding decrease in symmetry, it is difficult to develop an equivalent continuum that will simulate the behavior of the entire system. The discrete approach, on the other hand, requires details of the fracture geometry and material properties of both fractures and rock matrix. The difficulty in obtaining such information has been considered a serious limitation of discrete models, but improved borehole techniques can enable one to obtain the necessary data, at least in shallow systems. The possibility of extending these methods to deeper fracture systems needs more investigation. Such data must be considered when deciding whether to use a continuum or discrete model to represent the interaction of rock and fluid forces in a fractured rock system, especially with regard to the problem of induced seismicity. When one is attempting to alter the pressure distribution in a fault zone by injection or withdrawal of fluids, the extent to which this can be achieved will be controlled in large measure by the behavior of the fractures that communicate with the borehole. Since this is essentially a point phenomenon, i.e., the changes will propagate from a relatively small region around the borehole, the use of a discrete model would appear to be preferable.

Engineering Geology↗

Ferromanganese nodules from MANOP Sites H, S, and R-Control of mineralogical and chemical composition by multiple accretionary processes

The chemical composition of ferromanganese nodules from the three nodule-bearing MANOP sites in the Pacific can be accounted for in a qualitative way by variable contributions of distinct accretionary processes. These accretionary modes are: 1. (1) hydrogenous, i.e ., direct precipitation or accumulation of colloidal metal oxides in seawater, 2. (2) oxic diagenesis which refers to a variety of ferromanganese accretion processes occurring in oxic sediments; and 3. (3) suboxic diagenesis which results from reduction of Mn +4 by oxidation of organic matter in the sediments. Geochemical evidence suggests processes (1) and (2) occur at all three MANOP nodule-bearing sites, and process (3) occurs only at the hemipelagic site, H, which underlies the relatively productive waters of the eastern tropical Pacific. A normative model quantitatively accounts for the variability observed in nearly all elements. Zn and Na, however, are not well explained by the three end-member model, and we suggest that an additional accretionary process results in greater variability in the abundances of these elements. Variable contributions from the three accretionary processes result in distinct top-bottom compositional differences at the three sites. Nodule tops from H are enriched in Ni, Cu, and Zn, instead of the more typical enrichments of these elements in nodule bottoms. In addition, elemental correlations typical of most pelagic nodules are reversed at site H. The three accretionary processes result in distinct mineralogies. Hydrogenous precipitation produces δMnO 2 . Oxic diagenesis, however, produces Cu-Ni-rich todorokite, and suboxic diagenesis results in an unstable todorokite which transforms to a 7 Å phase (“birnessite”) upon dehydration. The presence of Cu and Ni as charge-balancing cations influence the stability of the todorokite structure. In the bottoms of H nodules, which accrete dominantly by suboxic diagenesis, Na + and possibly Mn +2 provide much of the charge balance for the todorokite structure. Limited growth rate data for H nodules suggest suboxic accretion is the fastest of the three processes, with rates at least 200 mm/10 6 yr. Oxic accretion is probably 10 times slower and hydrogenous 100 times slower. Since these rates predict more suboxic component in bulk nodules than is calculated by the normative analysis, we propose that suboxic accretion is a non-steady-state process. Variations in surface water productivity cause pulses of particulate flux to the sea floor which result in transient Mn reduction in the surface sediments and reprecipitation on nodule surfaces.

Geochimica et Cosmochimica Acta↗

Stable isotope geochemistry of acid mine drainage: Experimental oxidation of pyrite

Sulfate and water from experiments in which pyrite was oxidized at a pH of 2.0 were analyzed for sulfur and oxygen stable isotopes. Experiments were conducted under both aerobic and anaerobic sterile conditions, as well as under aerobic conditions in the presence of Thiobacillus ferrooxidans, to elucidate the pathways of oxidation. Oxygen isotope fractionation between SO2-4 and H2O varied from +4.0 %. (anaerobic, sterile) to + 18.0 %. (aerobic, with T. ferrooxidans.). The oxygen isotope composition of dissolved oxygen utilized in both chemical and microbially-mediated oxidation was also determined (+11.4 %., by T. ferrooxidans; +18.4 %., chemical). Contributions of water-derived oxygen and dissolved oxygen to the sulfate produced in the oxidation of pyrite could thus be estimated. Water-derived oxygen constituted from 23 to ~ 100 percent of the oxygen in the sulfate produced in the experiments, and this closely approximates the range of contribution in natural acid mine drainage. Oxidation of sulfides in anaerobic, water-saturated environments occurs primarily by chemical oxidation pathways, whereas oxidation of sulfides in well-aerated, unsaturated zone environments occurs dominantly by microbially mediated pathways.

Geochimica et Cosmochimica Acta↗

Variations in the chemical and stable isotope composition of carbon and sulfur species during organic-rich sediment alteration: An experimental and theoretical study of hydrothermal activity at Guaymas Basin, Gulf of California

Organic-rich diatomaceous ooze was reacted with seawater and a Na-Ca-K-Cl fluid of seawater chlorinity at 325–400°C, 400–500 bars, and fluid/sediment mass ratios of 1.56–2.35 to constrain factors regulating the abundance and stable isotope composition of C and S species during hydrothermal alteration of sediment from Guaymas Basin, Gulf of California. Alteration of inorganic and organic sedimentary components resulted in extensive exchange reactions, the release of abundant H 2 S, CO 2 , CH 4 , and C organic , to solution, and recrystallization of the sediment to an assemblage containing albitic plagioclase, quartz, pyrrhotite, and calcite. The δ 34 S cdt "> δ 34 S cdt values of dissolved H 2 S varied from −10.9 to +4.3‰ during seawater-sediment interaction at 325 and 400°C and from −16.5 to −9.0‰ during Na-Ca-K-Cl fluid-sediment interaction at 325 and 375°C. In the absence of seawater SO 4 , H 2 S is derived from both the transformation of pyrite to pyrrhotite and S released during the degradation of organic matter. In the presence of seawater SO 4 , reduction of SO 4 contributes directly to H 2 S production. Sedimentary organic matter acts as the reducing agent during pyrite and SO 4 reduction. Requisite acidity for the reduction of SO 4 is provided by Mg fixation during early-stage sediment alteration and by albite and calcite formation in Mg-free solutions. Organically derived CH 4 was characterized by δ 13 C pdb "> δ13Cpdb values ranging between −20.8 and −23.1‰, whereas δ 13 C pdb "> δ 13 C pdb values for dissolved C organic ranged between −14.8 and −17.7%. Mass balance calculations indicate that δ 13 C values for organically derived CO 2 were ≥ − 14.8%. Residual solid sedimentary organic C showed small (≤ 0.7‰) depletions in 13 C relative to the starting sediment. The experimental results are consistent with the isotopic and chemical composition of natural hydrothermal fluids and minerals at Guaymas Basin and permit us to better constrain sources and sinks for C and S species in subseafloor hydrothermal systems at sediment-covered spreading centers. Our data show that the sulfur isotope composition of hydrothermal Sulfide minerals in Guaymas Basin can be explained by derivation of S from diagenetic sulfide and seawater sulfate. Basaltic S may also contribute to hydrothermal sulfide precipitates but is not required to explain their isotopic composition. Estimates of seawater/ sediment mass ratios based on sulfur isotopic composition of sulfide minerals and the abundance of dissolved NH 3 in vent fluids range from 3–29 during hydrothermal circulation. Sources of C in Guaymas Basin hydrothermal fluids include thermal degradation of organic matter, bacteriogenic methane production, and dissolution of diagenetic carbonate.

Baja California Sur↗

Annual and semiannual variations of the geomagnetic field at equatorial locations

For a year of quiet solar-activity level, geomagnetic records from American hemisphere observatories located between about 0?? and 30?? north geomagnetic latitude were used to compare the annual and semiannual variations of the geomagnetic field associated with three separate contributions: (a) the quiet-day midnight level, MDT; (b) the solar-quiet daily variation, Sq; (c) the quiet-time lunar semidiurnal tidal variation, L(12). Four Fourier spectral constituents (24, 12, 8, 6 h periods) of Sq were individually treated. All three orthogonal elements (H, D and Z) were included in the study. The MDT changes show a dominant semiannual variation having a range of about 7 gammas in H and a dominant annual variation in Z having a range of over 8 gammas. These changes seem to be a seasonal response to the nightside distortions by magnetospheric currents. There is a slow decrease in MDT amplitudes with increasing latitude. The Sq changes follow the patterns expected from an equatorial ionospheric dynamo electrojet current system. The dominant seasonal variations occur in H having a range of over 21 gammas for the 24 h period and over 12 gammas for the 12 h period spectral components. The higher-order components are relatively smaller in size. The Sq(H) amplitudes decrease rapidly with increasing latitude. Magnetospheric contributions to the equatorial Sq must be less than a few per cent of the observed magnitude. The L(12) variation shows the ionospheric electrojet features by the dominance of H and the rapid decrease in amplitude with latitude away from the equator. However, the seasonal variation range of over 7 gammas has a maximum in early February and minimum in late June that is not presently explainable by the known ionospheric conductivity and tidal behavior. ?? 1981.

Journal of Atmospheric and Terrestrial Physics↗

Determination of the components of stormflow using water chemistry and environmental isotopes, Mattole River basin, California

The chemical and isotopic composition of rainfall and stream water was monitored during a storm in the Mattole River basin of northwestern California. About 250 mm of rain fell during 6 days (∼80% within a 42 h period) in late January, 1972, following 24 days of little or no precipitation. River discharge near Petrolia increased from 22 m 3 s −1 to a maximum of 1300 m 3 s −1 while chloride and silica concentrations decreased only from 3.2 to 2.1 and 11.5 to 8.6 mgl −1 , respectively. Meanwhile, the isotopic composition of the river changed from δD = -42%, δ 18 O = -6.8% and 40 tritium units (T.U.) to extreme values at highest flow of δD = -35%, δ 18 O = -5.9% and 25 T.U. in response to volume-weighted rainfall averaging δD = -19.5%, δ 18 O = -3.1% and 18 T.U. Despite much rainfall of a composition quite different from that of the prestorm river water, “buffering” processes in the watershed greatly restricted changes in the chemical and isotopic content of the river during storm runoff. Because of the physical and hydrologic characteristics of the watershed, major contributions of groundwater to stormflow are very unlikely. The large increase in dissolved chemical load observed at maximum river discharge required that extensive interaction with, and presumably penetration of, soils occurred within a few hours time. Such a large increase in chemical load also required subsurface stormflow throughout a high proportion of the watershed. Chemical and isotopic stabilization of stormflow is believed to be due mainly to displacement of prestorm soil water, with some effects on river chemistry due to rapid rain-soil interactions. The isotopic and chemical composition of prestorm soil moisture cannot readily be predicted a priori because of possible variability in rainfall composition, evaporation, and exchange with atmospheric moisture, nor can it be assumed that baseflow has a predictable relation to the chemical or isotopic composition of water displaced from soils during storms. Therefore, it seems inappropriate to draw conclusions as to the relative proportions of groundwater and rainfall in runoff from a particular storm based only on the average compositions of rainfall, stormflow, and prestorm river water, as has been done in most previous isotope hydrograph studies. Given the great variation in hydrology, topography, soil characteristics, rainfall intensity and quantity, etc. from place to place, the relative amount of overland flow, subsurface flow from the unsaturated zone and of groundwater in stormflow can vary greatly in time and space.

California↗

Effect of atrazine on potential denitrification in aquifer sediments

Agriculturaf use of fertilizers and herbicides has often resulted in nitrate and atrazine contamination of the shallow aquifers that underlay cultivated fields. In several cases, the concentrations of atrazine and nitrate dissolved in ground water are positively correlated (Spalding ef al., 1979; Chen and Druliner, 1987; Spalding et al., 1989). Because simultaneous application of nitrate fertilizers and the herbicide, atrazine, is common, the co-occurrence of these contaminants in ground water is not entirely unexpected. However, the possibility also exists that this co-occurrence may ret&t interactions of atrazine with nitrate in the subsurface environment. R&ton and Cervelh (1980), McElhannon ei al. (1984) and Mills (1984) have reported that atrazine inhibits denitrification in‘soil’lf this i‘s indeed the case, atrazine contamination may contribute to nitrate preservation and accumulation in anaerobic aquifers by inhibiting denitrification, the principal mechanism for nitrate removal in anaerobic systems. Huwever, the effect of atrazine on the rate of denit~ficat~on in soils remains controversial, because atrazine has been reported variously to enhance denitrification (Cervelli and Ralston, 1983) or to have no effect on denitrification in soils (Bollag and Henninger, 1976; Yeomans and Bremner, IQ85, 1987). Moreover, the effect of dissolved atrazine concentrations on the rate of denitrification in aquifer sediments has not been reported. Our purpose was to determine the elects of dissolved atrazine concentrations on potential rates ofdenitri~~t~on in aquifer sediments from two different agricultural areas to evaluate the hypothesis that, by inhibiting denitrification, atrazine contributes to nitrate preservation in anaerobic aquifer systems.

Soil Biology and Biochemistry↗

Surface faults in the gulf coastal plain between Victoria and Beaumont, Texas

Displacement of the land surface by faulting is widespread in the Houston-Galveston region, an area which has undergone moderate to severe land subsidence associated with fluid withdrawal (principally water, and to a lesser extent, oil and gas). A causative link between subsidence and fluid extraction has been convincingly reported in the published literature. However, the degree to which fluid withdrawal affects fault movement in the Texas Gulf Coast, and the mechanism(s) by which this occurs are as yet unclear. Faults that offset the ground surface are not confined to the large (>6000-km 2 ) subsidence “bowl” centered on Houston, but rather are common and characteristic features of Gulf Coast geology. Current observations and conclusions concerning surface faults mapped in a 35,000-km 2 area between Victoria and Beaumont, Texas (which area includes the Houston subsidence bowl) may be summarized as follows: (1) Hundreds of faults cutting the Pleistocene and Holocene sediments exposed in the coastal plain have been mapped. Many faults lie well outside the Houston-Galveston region; of these, more than 10% are active, as shown by such features as displaced, fractured, and patched road surfaces, structural failure of buildings astride faults, and deformed railroad tracks. (2) Complex patterns of surface faults are common above salt domes. Both radial patterns (for example, in High Island, Blue Ridge, Clam Lake, and Clinton domes) and crestal grabens (for example, in the South Houston and Friendswood-Webster domes) have been recognized. Elongate grabens connecting several known and suspected salt domes, such as the fault zone connecting Mykawa, Friendswood-Webster, and Clear Lake domes, suggest fault development above rising salt ridges. (3) Surface faults associated with salt domes tend to be short (<5 km in length), numerous, curved in map view, and of diverse trend. Intersecting faults are common. In contrast, surface faults in areas unaffected by salt diapirism are frequently mappable for appreciable distances (>10 km), occur singly or in simple grabens, have gently sinuous traces, and tend to lie roughly parallel to the ENE-NE “coastwise” trend common to regional growth faults identified in subsurface Tertiary sediments. (4) Evidence to support the thesis that surface scarps are the shallow expression of faults extending downward into the Tertiary section is mostly indirect, but nonetheless reasonably convincing. Certainly the patterns of crestal grabens and radiating faults mapped on the surface above salt domes are more than happenstance; analogous fault patterns have been documented around these structures at depth. Similarly, some of the long surface faults not associated with salt domes seem to have subsurface counterparts among known regional growth faults documented through well logs and seismic data. Correlations between surface scarps and faults offsetting subsurface data are not conclusive because of the large vertical distances (1900- 3800 m) involved in making the most of the inferred connections. Nevertheless, the large number of successful correlations - in trend, movement sense, and position - suggests that many surface scarps represent merely the most recent displacements on faults formed during the Tertiary. (5) Upstream-facing fault scarps in this region of low relief can be significant impediments to streams. Locally, both abandoned, mud-filled Pleistocene distributary channels and, more commonly, Holocene drainage lines still occupied by perennial streams reflect the influence of faulting on their development. Some bend sharply near faults and have tended to flow along or pond against the base of scarps; others meander within topographically expressed grabens. Such evidence for Quaternary displacement of the ground surface is widespread in the Texas Gulf coast. In the general, however, streams in areas now offset by faulting show no disruption of their courses where they cross fault scarps. Such scarps are probably very young, and where they can be demonstrated to partly or wholly predate fluid withdrawal, very recent natural fault activity is indicated. (6) Early aerial photographs (1930) of the entire region and topographic maps (1915-16 surveys) of Harris County (Houston and vicinity) show that many faults had already displaced the land surface at a time when appreciable pressure declines in subjacent strata were localized to relatively few areas of large-scale pumping. Prehistoric faulting of the land surface, as noted above, appears to have affected much of the Texas Gulf Coast. (7) A relation between groundwater extraction and current motion on active faults is suspected because of the increased incidence of ground failure in the Houston-Galveston subsidence bowl. This argument is weakened somewhat by recognition of numerous surface faults, some of them active today, far beyond the periphery of the strongly subsiding area. Moreover, tilt beam records from two monitored faults in northwest Houston and accounts of fault damage from local residents demonstrate a complex, episodic nature of fault creep which can only partially be correlated with groundwater production. Nevertheless, although specific mechanisms are in doubt, the extraction of groundwater from shallow (<800-m) sands is probably a major factor in contributing to current displacement of the ground surface in the Houston-Galveston region. Within this large area, the number of faults recognizable from aerial photographs has increased at least tenfold between 1930 and 1970. Elsewhere in the Texas Gulf Coast only a moderate increase has been noted, some of which is possibly attributable to oil and gas production. Surface fault density in the Houston-Galveston region is far greater than in any other area of the Texas Gulf Coast investigated to date. A plausible explanation for these differences is that large overdrafts of groundwater over an extended period of time in the Houston-Galveston region have stimulated fault activity there. Throughout the Texas Gulf Coast, however, a natural contribution to fault motion remains a distinct possibility.

Texas↗

Arsenopyrite in the bank deposits of the Whitewood Creek-Belle Fourche-Cheyenne River-Lake Oahe system, South Dakota, U.S.A.

Mining, milling, and processing wastes containing quantities of arsenopyrite were produced around Lead, South Dokata, from 1875 to 1977. Much of this material was discharged into Whitewood Creek, and from there portions of the waste were transported to the Belle Fourche River, thence to the Cheyenne River, and finally to the Missouri River. In 1958, the Missouri River was dammed at Pierre, forming Lake Oahe. Analyses of cores collected from the lake bottom showed the presence of arsenic-rich layers in the bed sediments; substantial portions of the arsenic are due to arsenopyrite in the 8-16 and 16-32 ??m size fractions of the sediments. In addition, suspended-sediment samples collected from the Cheyenne River above Lake Oahe contain detectable quantities of arsenopyrite in the 8-16 and 16-32 ??m fractions. Solid material collected from the banks and floodplains of the Belle Fourche River and Whitewood Creek contains reduced and oxidized phases. The reduced phases have arsenic maxima in the 16-32 and 32-63 ??m size ranges. These fractions also contribute the most arsenic to the samples; the major source being arsenopyrite. The oxidized segments have arsenic maxima in the < 2 and > 63 ??m size ranges. The < 2 ??m maxima are associated with widely disseminated, arsenic-bearing iron oxide coatings. However, the > 63 ??m fractions contribute the most arsenic to the oxidized samples. This arsenic, despite the oxidized nature of the samples, is associated with arsenopyrite coated with thin iron oxide rinds. It has been calculated that 80% of the arsenic in these deposits is associated with sulfides (in the form of arsenopyrite), while 20% is associated with iron oxides. The arsenopyrite found in the banks and floodplains of Whitewood Creek and the Belle Fourche River are the likely source of the arsenopyrite found in the suspended sediments of the Cheyenne River and in the bed sediment of Lake Oahe.

Conference Paper↗

Response of a 42-storey steel-frame building to the Ms = 7.1 Loma Prieta earthquake

A set of 14 acceleration records was obtained from a 42-storey steel-frame building, the Chevron Building, in San Francisco during the M s = 7.1 "> M s = 7.1 Loma Prieta earthquake of 17 October 1989. Data were analysed using a system identification method based on the discretetime linear filtering, and the least-squares estimation techniques. The results show that the response of the building is dominated by two modes: a translational mode in the weaker (southwest-northeast) principal direction of the building at 0.16 Hz with 5% damping, and a translational-torsional mode along the east-west diagonal of the building's cross-section at 0.20 Hz with 7% damping. There are significant contributions from higher modes at 0.54 Hz, 0.62 Hz, 1.02 Hz and 1.09 Hz. All the modes incorporate some torsion, but the amplitudes of torsional components are small, about 10% of translational amplitudes. Soil-structure interaction influences the vibrations near 1.0 Hz. The contribution of soil-structure interaction to the peak displacements of the building is significant, particularly at lower floors.

California↗

Studies of angiospermous woods in Australian brown coal by nuclear magnetic resonance and analytical pyrolysis: new insight into early coalification

Many Tertiary coals contain abundant fossilized remains of angiosperms, which commonly dominated the ancient peat-swamp environments; modern analogs of such swamps can be found in tropical and subtropical regions of the world. Comparisons of angiospermous wood from Australian brown coal with similar wood buried in modern peat swamps of Indonesia have provided some new insights into coalification reactions. These comparisons were made by using solid-state 13 C nuclear magnetic resonance (NMR) techniques and pyrolsis-gas chromatography-mass spectrometry (py-gc-ms). These two modern techniques are especially suited for detailed structural evaluation of the complex macromolecules in coal. The earliest transformation (peatification) of organic matter in angiospermous wood is the degradation and removal of cellulosic components and the concomitant selective preservation of lignin-derived components. The angiospermous lignin that becomes enriched in wood as a result of cellulose degradation also is modified by coalification reactions; this modification, however, does not involve degradation and removal of the lignin. Rather, the early coalification process transforms the lignin phenols (guiacyl and syringyl) to eventually yield the aromatic structures typically found in brown coal. One such transformation, which is determined from NMR data, involves the cleavage of aryl-ether bonds that link guaiacyl and syringyl units in lignin, and this transformation leads to the formation of free lignin phenols. Another transformation, which is also determined from the NMR data, involves the loss of methoxyl groups, probably via demethylation, to produce catechol-like structures. Coincident with ether-cleavage and demethylation, the aromatic rings derived from lignin phenols become more carbon-substituted and cross linked, as determined by dipolar-dephasing NMR studies. This cross linking is probably responsible for preventing the lignin phenols, which are freed from the lignin macromolecule by ether cleavage, from being removed from the coal by dissolution. Pyrolysis data suggest that the syringyl units are altered more readily than are guaiacyl units, and this difference in resistance leads to an enrichment of the guaiacyl units in fossil angiospermous woods. Many of the coalification reactions noted above occur to some degree in all angiospermous fossil wood examined; however, some significant differences are observed in the degree of coalification of the fossil wood samples from the same burial depth in the brown coal. These differences indicate that the depth and duration of burial are probably not entirely responsible for the variations in degree of coalification. Different rates of degradation in peat may have contributed to the variations in the apparent degree of coalification; some woods may have been altered more rapidly at the peat stage than others. Although preliminary, this systematic study of botanically related wood in peat and coal results in a more detailed differentiation of coalification reactions than have previous investigations. The combined use of solid-state 13 C NMR and py-gc-ms has facilitated this detailed insight into the coalification of angiospermous wood.

International Journal of Coal Geology↗

Tectonics and metallogenic provinces

Various theories have been advanced to explain the well-known uneven distribution of metals and ore-deposit types in space and time. Primordial differences in the mantle, preferential concentration of elements in the crust, the prevalence of ore-forming processes at certain times and (or) places, and combinations of one or several of these factors have all been called upon to account for the "metallogenic provinces," which can be defined loosely as regions containing similar deposits of one or a group of metals or minerals. Because many, perhaps most, provinces have complex, multistage origins, the relative importance of inheritance vs. process is still controversial. In recent years the geographic relationship of many geologically young provinces to present-day plate-tectonic positions (accreting or consuming margins, intraplate structures, etc.) has been widely recognized, and the presumption is strong that older provinces had similar relationships to former plates. As most ore deposits resulted from a favorable conjunction of geological processes that are no longer operative, elucidation of their genesis requires reconstruction of the geologic history of the province, with particular emphasis on events coeval with mineralization. Tectonic analysis is an important aspect of this reconstruction; data from orbiting satellites have contributed greatly to this analysis, as the voluminous literature of the past decade testifies. Both the synoptic view of large areas and the ability to emphasize faint contrasts have revealed linear, curvilinear, and circular features not previously recognized from field studies. Some of these undoubtedly reflect basement structures that have contributed to the development, or limit the extent, of metallogenic provinces. Their recognition and delineation will be increasingly valuable to the assessment of resources available and as guides to exploration for the ores needed by future generations. ?? 1983.

Advances in Space Research↗

Mechanisms for trace metal enrichment at the surface microlayer in an estuarine salt marsh

The relative contributions of adsorption to particulate surfaces, complexation with surface-active organic ligands and uptake by micro-organisms were evaluated with respect to their importance in the surface microlayer enrichment (‘partitioning’) of Cd, Pb and Cu. The contributions of each process were inferred from field data in which partitioning of the dissolved and particulate forms of Cd, Pb and Cu, total and dissolved organic carbon, particles and total bacteria were observed. In the South San Francisco Bay estuary, particle enrichment appears to control trace metal partitioning. Trace metal association with the particulate phase and the levels of partitioning observed were in the order Pb > Cu > Cd and reflect the calculated equilibrium chemical speciation of these metals in computer-simulated seawater matrices.

Marine Chemistry↗

Computer simulations of large asteroid impacts into oceanic and continental sites--Preliminary results on atmospheric, cratering and ejecta dynamics

Computer simulations have been completed that describe passage of a 10-km-diameter asteroid through the Earth's atmosphere and the subsequent cratering and ejecta dynamics caused by impact of the asteroid into both oceanic and continental sites. The asteroid was modeled as a spherical body moving vertically at 20 km/s with a kinetic energy of 2.6 × 10 30 ergs (6.2 × 10 7 Mt ). Detailed material modeling of the asteroid, ocean, crustal units, sedimentary unit, and mantle included effects of strength and fracturing, generic asteroid and rock properties, porosity, saturation, lithostatic stresses, and geothermal contributions, each selected to simulate impact and geologic conditions that were as realistic as possible. Calculation of the passage of the asteroid through a U.S. Standard Atmosphere showed development of a strong bow shock wave followed by a highly shock compressed and heated air mass. Rapid expansion of this shocked air created a large low-density region that also expanded away from the impact area. Shock temperatures in air reached ∼20, 000K near the surface of the uplifting crater rim and were as high as ∼2000K at more than 30 km range and 10 km altitude. Calculations to 30 s showed that the shock fronts in the air and in most of the expanding shocked air mass preceded the formation of the crater, ejecta, and rim uplift and did not interact with them. As cratering developed, uplifted rim and target material were ejected into the very low density, shock-heated air immediately above the forming crater, and complex interactions could be expected. Calculations of the impact events showed equally dramatic effects on the oceanic and continental targets through an interval of 120 s. Despite geologic differences in the targets, both cratering events developed comparable dynamic flow fields and by ∼29s had formed similar-sized transient craters ∼39km deep and ∼62km across. Transient-rim uplift of ocean and crust reached a maximum altitude of nearly 40 km at ∼30s and began to decay at velocities of 500 m/s to develop large-tsunami conditions. After ∼30s, strong gravitational rebound drove both craters toward broad flat-floored shapes. At 120 s, transient crater diameters were ∼80km (continental) and ∼105km (oceanic) and transient depths were ∼27km; crater floors consisting of melted and fragmented hot rock were rebounding rapidly upward. By 60 s, the continental crater had ejected ∼2 × 10 14 t, about twice the mass ejected from the oceanic crater. By 120 s, ∼70, 000km 3 (continental) and ∼90, 000km 3 (oceanic) target material were excavated (no mantle) and massive ejecta blankets were formed around the craters. We estimate that in excess of ∼70% of the ejecta would finally lie within ∼3 crater diameters of the impact, and the remaining ejecta (∼10 13 t), including the vaporized asteroid, would be ejected into the atmosphere to altitudes as high as the ionosphere. Effects of secondary volcanism and return of the ocean over hot oceanic crater floor could also be expected to contribute substantial material to the atmosphere.

International Journal of Impact Engineering↗

Lead isotopes in iron and manganese oxide coatings and their use as an exploration guide for concealed mineralization

Lead isotopes from Fe and Mn oxides that coat stream pebbles from around the Mount Emmons porphyry molybdenum deposit in Colorado were studied to assess the feasibility of using Pb isotopes to detect concealed mineral deposits. The Fe/Mn oxide coatings were analyzed to determine their elemental concentrations using ICP-AES. The Pb isotope compositions of solutions from a selected suite of samples were measured, using both thermal ionization and ICP mass spectrometry, to compare results determined by the two analytical methods. Heavy mineral concentrates from the same sites were also analyzed to compare the Pb isotope compositions of the Fe/Mn coatings with those found in panned concentrates. The Fe/Mn and 206 Pb/ 204 Pb ratios of the oxide coatings are related to the lithology of the host rocks; Fe/Mn oxide coatings on pebbles of black shale have higher Fe/Mn values than do the coatings on either sandstone or igneous rocks. The shale host rocks have a more radiogenic signature (e.g. higher 206 Pb/ 204 Pb) than the sandstone or igneous host rocks. The Pb isotope data from sandstone and igneous hosts can detect concealed mineralized rock on both a regional and local scale, even though there are contributions from: (1) metals from the main-stage molybdenite ore deposit; (2) metals from the phyllic alteration zone which has a more radiogenic Pb isotope signature reflecting hydrothermal leaching of Pb from the Mancos Shale; (3) Pb-rich base metal veins with a highly variable Pb isotope signature; and (4) sedimentary country rocks which have a more radiogenic Pb isotope signature. An investigation of within-stream variation shows that the Pb isotope signature of the molybdenite ore zone is retained in the Fe/Mn oxide coatings and is not camouflaged by contributions from Pb-rich base-metal veins that crop out upstream. In another traverse, the Pb isotope data from Fe/Mn oxide coatings reflect a complex mixing of Pb from the molybdenite ore zone and its hornfels margin, Pb-rich base-metal veins, and sedimentary country rocks. Stream-sediment anomalies detected using oxalic acid leaches can be evaluated using Pb isotope analysesof selected geochemical anomalies. Such an evaluation procedure, given regional target Pb isotope signatures for concealed mineralization, can greatly reduce the cost of exploration for undiscovered ore deposits concealed beneath barren overburden. Lead isotope measurements on aliquots of the same solutions showed that ICP-MS determinations are of low precision and vary non-systematically when compared with the Pb isotope values of the higher precision thermal ionization method. These variations and lower precision of the ICP-MS measurements are attributed to matrix effects.

Colorado↗

Reproduction and reproductive strategies relevant to management of Whooping Cranes ex situ

Due to the small population size (∼400 birds) and continuing threats to wild Whooping Cranes ( Grus americana ), an ex situ (captive) population is maintained to contribute to the recovery of the species. The goals of the captive breeding program are to provide opportunity for research and birds for reintroduction. However, reproduction among captive birds is far from optimal. Specifically, whooping cranes maintained ex situ experience delayed onset of reproduction as well as low rates of egg production and egg fertility when compared to wild populations. To improve the contribution of the captive population to Whooping Crane recovery, there is a need to (1) advance the understanding about the mechanisms regulating ovarian function and egg production, especially the influence of males (their presence and behavior) on endocrine and reproductive behavior in females, as well as (2) identify the underlying cause(s) of poor reproduction in Whooping Cranes housed ex situ. In this chapter, we summarize current knowledge of Whooping Crane reproduction with a focus on egg production and fertility. We also discuss management strategies, such as environmental management, and reproductive technologies, including artificial insemination and sperm cryopreservation that may benefit captive reproduction, and finish with a discussion of future research priorities.

Book chapter↗