Arsenopyrite in the bank deposits of the Whitewood Creek-Belle Fourche-Cheyenne River-Lake Oahe system, South Dakota, U.S.A.

A. J. Horowitz; K. A. Elrick; R.B. Cook

doi:10.1016/0048-9697(90)90242-m

Home/Archive/USGS

USGS · 70015828

Arsenopyrite in the bank deposits of the Whitewood Creek-Belle Fourche-Cheyenne River-Lake Oahe system, South Dakota, U.S.A.

A. J. Horowitz·K. A. Elrick·R.B. Cook

View original source ↗Export metadata ↓

Abstract

Mining, milling, and processing wastes containing quantities of arsenopyrite were produced around Lead, South Dokata, from 1875 to 1977. Much of this material was discharged into Whitewood Creek, and from there portions of the waste were transported to the Belle Fourche River, thence to the Cheyenne River, and finally to the Missouri River. In 1958, the Missouri River was dammed at Pierre, forming Lake Oahe. Analyses of cores collected from the lake bottom showed the presence of arsenic-rich layers in the bed sediments; substantial portions of the arsenic are due to arsenopyrite in the 8-16 and 16-32 ??m size fractions of the sediments. In addition, suspended-sediment samples collected from the Cheyenne River above Lake Oahe contain detectable quantities of arsenopyrite in the 8-16 and 16-32 ??m fractions. Solid material collected from the banks and floodplains of the Belle Fourche River and Whitewood Creek contains reduced and oxidized phases. The reduced phases have arsenic maxima in the 16-32 and 32-63 ??m size ranges. These fractions also contribute the most arsenic to the samples; the major source being arsenopyrite. The oxidized segments have arsenic maxima in the < 2 and > 63 ??m size ranges. The < 2 ??m maxima are associated with widely disseminated, arsenic-bearing iron oxide coatings. However, the > 63 ??m fractions contribute the most arsenic to the oxidized samples. This arsenic, despite the oxidized nature of the samples, is associated with arsenopyrite coated with thin iron oxide rinds. It has been calculated that 80% of the arsenic in these deposits is associated with sulfides (in the form of arsenopyrite), while 20% is associated with iron oxides. The arsenopyrite found in the banks and floodplains of Whitewood Creek and the Belle Fourche River are the likely source of the arsenopyrite found in the suspended sediments of the Cheyenne River and in the bed sediment of Lake Oahe.

Explore related subjects

Conference Paper

Keep this discovery

Explore connections, maps & timelines

BibTeX RIS

A. J. Horowitz, K. A. Elrick, R.B. Cook. 1990. Arsenopyrite in the bank deposits of the Whitewood Creek-Belle Fourche-Cheyenne River-Lake Oahe system, South Dakota, U.S.A.. https://doi.org/10.1016/0048-9697(90)90242-m

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related USGS reports

USGS2026

Authoritative knowledge infrastructure for GeoAI: Implications for scientific spatial data providers

Geospatial Artificial Intelligence (GeoAI) increasingly relies on automated analysis of authoritative geospatial data, exposing limitations in data infrastructures originally designed for simple dissemination rather than for knowledge-driven use. From the perspective of scientific spatial data providers, the challenge is enabling GeoAI responsibly while retaining semantic clarity, provenance, reproducibility, and governance. This short paper (i) examines how GeoAI exposed limitations within existing geospatial data infrastructures, and (ii) identifies provider-side requirements for an authoritative knowledge infrastructure. Drawing on GIScience, scientific workflow, and operational AI literature, the paper outlines implications for national mapping organizations that seek to support advanced analytics without jeopardizing scientific rigor or stewardship responsibilities.

Conference Paper↗

USGS2026

Springs of the Catskill Mountains: A conduit flow system in predominantly siliciclastic strata

The Catskill Mountains of New York state are composed of thick sequences of interbedded mudstone, sandstone, and siltstone that are intercalated with thin beds of paludal limestone and calcareous mudstone. Sandstones often contain rip-up clasts of calcareous material at their bases and contain minor amounts of carbonate cement throughout their mass. This minor amount of calcareous material weathers out to produce thin zones of solutional porosity and permeability integrated within perched aquifers that feed perennial hillslope springs. Solutional features are evident within thin carbonate lenses and along fractures in sandstones, occasionally resulting in explorable cave-sized conduits. This study focuses on the behavior of bedrock springs and seeps in the headwaters of the Neversink River basin above the Neversink Reservoir. Bedrock springs are numerous throughout the Catskill Mountains and serve to provide baseflow to the headwater streams that tends to be more persistent during dry times than other baseflow sources. We observed dissolution-influenced conduits within the bedrock, and suffosional conduits within unconsolidated materials. Continuous water temperature at six springs was monitored at hourly intervals from May to October 2022 to investigate the thermal response of groundwater to daily and seasonal changes in air temperature along with event-based meteorological events. Temperature monitoring was augmented at some springs with time-lapse photography to evaluate persistence of flow. The thermal responses of springs to precipitation events were highly variable across sites, with some springs exhibiting flashy responses indicating a strong connection to the surface, while other springs showed muted or no thermal response to events. The seasonal thermal response also varied across sites having lag times of 23-48 days between peak air temperature and peak spring water temperature. The water temperatures and geochemical compositions of these bedrock springs support a conceptual model of multiple residence times, showing both event and seasonal groundwater storage within the conduit flow system that feeds the springs of the Catskill Mountains.

New York↗

USGS2026

Stability changes after weak layer collapse: Insights from an unexpected dataset

While conducting avalanche mitigation or traveling through the backcountry, avalanche professionals sometimes experience a "whumpf": a collapse-mode crack accompanied by surface cracking that does not produce an avalanche. These whumpfs are a clear warning sign of instability in the surrounding terrain. But assessing the collapsed slope itself, if it is steep enough to avalanche, carries much more uncertainty. Can slopes that whumpf and are steep enough to slide still avalanche? The answer to this question supports avalanche mitigators and ski guides in assessing whether to open such slopes. Previous research on collapsed slopes is limited to one study conducted before tests that estimate crack propagation propensity, such as the Propagation Saw Test (PST), were developed. This work showed that weak layer shear strength decreased immediately after collapsing and then increased over time. However, no research has examined crack propagation propensity after a whumpf. Studying propagation propensity is key for assessing how whumpfs immediately affect slope stability. To improve our understanding of changes in propagation propensity following weak layer collapse, we conducted PSTs on a test slope in the hours and days after an unexpected collapse occurred on a layer of surface hoar. Two PSTs at our study site three days prior to this collapse provided an estimate of weak layer propagation propensity. PST cut lengths decreased immediately following the collapse, suggesting that the collapse increased the propagation propensity. However, over the next 4-5 hours, PST cut lengths steadily increased at our site, likely due to ongoing sintering and strengthening in the collapsed weak layer. By the end of day two, we were no longer able to initiate propagation, suggesting substantial stabilization of the weak layer. Our results support prior findings and observations suggesting that slopes may remain capable of producing avalanches immediately after a collapse but likely stabilize over the next day or two. Although this research does not provide answers about precisely when a slope becomes stable after a collapse, it does highlight uncertainties in our understanding and interpretation of the stability of slopes that have whumped.

Montana↗