Geology Reports⌕ Search

SEARCH · Geology Reports

Results for “Journal of Water Process Engineering”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

1,711 records · Page 77Linked to original sources
USGS2025

Petrogenesis and mineralization potential of the Bradley Peak komatiitic basalts, Wyoming Province

The ca. 2.72 Ga Bradley Peak greenstone terrane in the Wyoming Province contains spinifex- and cumulate-textured komatiitic volcanic rocks that may host Ni-Cu-PGE sulfide mineralization. New whole rock geochemistry classifies these rocks as Al-undepleted komatiitic basalts derived from a parental melt with ~17 wt. % MgO. Isotopic data (Sm-Nd, Re-Os) and REE profiles suggest a plume source and possible assimilation of juvenile footwall volcanic rocks. Calculated sulfur concentrations at sulfide saturation and low-detection PGE geochemistry indicate these magmas did not saturate a sulfide liquid resulting in sulfide mineralization. Although the Bradley Peak komatiitic basalt flows are unlikely to host magmatic sulfide mineralization, they are likely the source of Au for regional orogenic gold deposits.

Wyoming↗
USGS2025

Using gridded seismicity to forecast the long-term spatial distribution of earthquakes for the 2025 Puerto Rico and U.S. Virgin Islands National Seismic Hazard Model

Gridded (or background) seismicity models are a critical component of probabilistic seismic hazard assessments, accounting for off‐fault and smaller‐magnitude earthquakes. They are typically developed by declustering and spatially smoothing an earthquake catalog to estimate a long‐term seismicity rate that can be used to forecast future earthquakes. Here, we present new gridded seismicity models for use in the 2025 National Seismic Hazard Model (NSHM) for Puerto Rico and the U.S. Virgin Islands (PRVI). The previous PRVI NSHM was released in 2003, and our new models incorporate updates to both data and methodology. We utilize an updated earthquake catalog based on improved Puerto Rico Seismic Network data with newly characterized completeness epochs. The catalog is divided into crustal, subduction interface, and intraslab seismicity using new methods and Slab2 subduction zone geometries. To forecast the long‐term spatial distribution of earthquakes, we use an updated methodology developed for the 2023 U.S. 50‐state NSHM, considering three declustering methods and two spatial smoothing methods based on 2D Gaussian kernels. To adapt it for the complex seismotectonics of the region, we also adopt probabilistic methods to account for events with unknown depths and uncertainties in tectonic classification, and develop a new method for spatial scaling to counteract the effects of spatial variability in network coverage while maintaining the use of smaller events. Finally, we test the performance of these spatial models in forecasting the location of M w ≥ 5earthquakes in the region. Our updated methodology improves the representation of epistemic uncertainty relative to the 2003 model, and our results demonstrate the effectiveness of the new measures we have introduced to address heterogeneities in network detection and systematically evaluate forecast performance.

Puerto Rico, U.S. Virgin Islands↗
USGS2025

Estimating the probability of export restrictions to inform mineral criticality

As demand for advanced technologies rises, mineral commodities will increase in geopolitical importance. To assess risks associated with mineral commodity supply chain disruptions, governmental agencies and others have developed "criticality" assessments, with criticality described using the economic impact and probability of supply chain disruptions. In previous work, subjective supply risk indicators were developed to approximate this probability, typically combining several factors such as supply diversity and political stability of trading partners, where indicator weightings can substantially impact results. This work explicitly quantifies trade barrier probability using an ensemble of several machine learning classifiers, with probability estimates informed by exogenous variables such as prior trade barrier implementation and global export dominance. Major differences in the high-probability countries and commodities are observed across models, but the ensemble method highlights Indonesia, China, Tanzania, and the United States as particularly high risk. This approach enables a direct, quantitative, objective approach to assessing trade barrier probability, enhancing risk identification and prioritization for policymakers.

SSRN↗
USGS2024

Onset of aftershocks: Constraints on the Rate-and-State model

Aftershock rates typically decay with time t after the mainshock according to the Omori–Utsu law, R (t)=K(c+t) −p ⁠ , with parameters K , c , and p . The rate‐and‐state (RS) model, which is currently the most popular physics‐based seismicity model, also predicts an Omori–Utsu decay with p = 1 and a c ‐value that depends on the size of the coseismic stress change. Because the mainshock‐induced stresses strongly vary in space, the c ‐value should vary accordingly. Short‐time aftershock incompleteness (STAI) in earthquake catalogs has prevented a detailed test of this prediction so far, but the newly developed a ‐positive method for reconstructing the true earthquake rate now allows its testing. Using previously published slip models, we calculate the coseismic stress changes for the six largest mainshocks in Southern California in recent decades and estimate the maximum shear as a scalar proxy of the coseismic stress tensor. Aftershock rates reconstructed for events in different stress ranges show that the rates follow a power law with p = 1 independent of stress with no clear sign of a c ‐value. The onset of the power‐law decay is abrupt and more delayed in areas with smaller stress changes. The observations do not necessarily contradict the RS model, as STAI limits the resolution for early aftershocks, and the RS model can reproduce the observations for specific Aσ values. However, the observations lead to strong constraints, namely Aσ <10 kPa and a power‐law decay of the background rate with distance to the fault, with exponent 2.7.

Seismological Research Letters↗
USGS2024

Rainfall intensification amplifies exposure of American Southwest to conditions that trigger postfire debris flows

Short-duration, high-intensity rainfall can initiate deadly and destructive debris flows after wildfire. Methods to estimate the conditions that can trigger debris flows exist and guidance to determine how often those thresholds will be exceeded under the present climate are available. However, the limited spatiotemporal resolution of climate models has hampered efforts to characterize how rainfall intensification driven by global warming may affect debris-flow hazards. We use novel, dynamically downscaled (3.75-km), convection-permitting simulations of short-duration (15-min) rainfall to evaluate threshold exceedance for late 21st-century climate scenarios in the American Southwest. We observe significant increases in the frequency and magnitude of exceedances for regions dominated by cool- and warm-season rainfall. We also observe an increased frequency of exceedance in regions where postfire debris flows have not been documented, and communities are unaccustomed to the hazard. Our findings can inform planning efforts to increase resiliency to debris flows under a changing climate.

Arizona, California, Nevada, New Mexico, Utah↗
USGS2026

Apatite (U-Th)/He thermochronology from Marsh Creek anticline reconciles Cenozoic and Holocene strain patterns and elucidates the Cenozoic canning displacement zone of Arctic Alaska

The northeastern Brooks Range is a vast fold-thrust belt that records the northernmost expression of Cenozoic deformation in Alaska, likely with complex dynamic linkages to distant tectonic elements. The principal focus of this manuscript is the Marsh Creek anticline (MCA), which is a large and recently active structure within the broader northeastern Brooks Range. The MCA is a complex, polyphase structure mostly buried beneath the Arctic coastal plain. We present apatite (U-Th)/He (AHe) dates from six outcrop samples, all near the structural crest of the anticline, as well as supporting detrital zircon U/Pb (ZUPb) age spectra from five outcrop samples. The AHe sample transect spans ~3 km of structural relief. The four shallowest AHe samples are not reset. However, the two deepest samples exhibit low intrasample variability among replicates and strong date versus grain radius correlations, suggesting post-depositional burial heating to within the AHe partial retention zone. Inverse thermal history modeling of these data resolves a protracted phase of exhumational cooling that began around 33–28 Ma. Detrital ZUPb age spectra from Paleogene strata support an interpretation of diverse inherited thermal histories recorded by the AHe data, and they are also consistent with extant reconstructions of Paleogene sediment dispersal. Placed into regional context, the results constrain a phase of increasing structural relief in the northeastern Brooks Range fold-thrust belt that began by the Eocene. The relief developed in a zone characterized by diminishing structural relief to the west called the Canning displacement zone. Although this zone was active since the Eocene, several structures including the studied part of the MCA were rapidly exhumed in the Oligocene. Lastly, we argue for kinematic compatibility between Cenozoic contraction and active strike-slip in the northeastern Brooks Range, with the temporal change in strain style likely reflecting the increase in structural relief and topography.

Alaska↗
USGS2025

False positives in the identification of dynamic earthquake triggering

Dynamic earthquake triggering is commonly identified through the temporal correlation between increased seismicity rates and global earthquakes that are possible triggering events. However, correlation does not imply causation. False positives may occur when unrelated seismicity rate changes coincidently occur at around the time of candidate triggers. We investigate the expected false positive rate in Southern California with global M ≥ 6 earthquakes as candidate triggers. We compute the false positive rate by applying the statistical tests used by DeSalvio and Fan (2023), https://doi.org/10.1029/2023jb026487 to synthetic earthquake catalogs with no real dynamic triggering. We find a false positive rate of ∼3.5%–8.5% when realistic earthquake clustering is present, consistent with the 95% confidence typically used in seismology. However, when this false positive rate is applied to the tens of thousands of spatial-temporal windows in Southern California tested in DeSalvio and Fan (2023), https://doi.org/10.1029/2023jb026487 , thousands of false positives are expected. The expected false positive occurrence is large enough to explain the observed apparent triggering following 70% of large global earthquakes (DeSalvio & Fan, 2023, https://doi.org/10.1029/2023jb026487 ), without requiring any true dynamic triggering. Aside from the known triggering from the nearby El Mayor-Cucapah, Mexico, earthquake, the spatial and temporal characteristics of the reported triggering are indistinguishable from random false positives. This implies that best practice for dynamic triggering studies that depend on temporal correlation is to estimate the false positive rate and investigate whether the observed apparent triggering is distinguishable from the correlations that may occur by chance.

JGR Solid Earth↗
USGS2025

Implications of physics-based M9 ground motions on liquefaction-induced damage in the Cascadia Subduction Zone: Looking forward and backward

Given the likelihood of future M9 Cascadia Subduction Zone (CSZ) earthquakes, various estimates of the resulting, regional ground motions have been made, including a suite of 30 physics-based simulations that reflect key modeling uncertainties. However, because the last CSZ interface rupture occurred in 1700 CE, the shaking expected in such an event is especially uncertain, as are the impacts to the built and living environments. Like other coseismic impacts, soil liquefaction poses a significant threat and must be considered by any scenario study used to inform planning and response, or to focus mitigation resources. Liquefaction is also notable for its potential to “ground truth” ground-motion estimates, given that its presence or absence in the geologic record can provide constraint on the intensities of shaking in past events. It is thus an important phenomenon looking both forward and backward. Accordingly, using recent physics-based simulations, this study (1) predicts liquefaction in M9 CSZ ruptures at 400 locations in Oregon, Washington, and British Columbia (BC) using an array of cone-penetration-test based models and (2) uses paleoliquefaction evidence at ten sites spanning from Southern Oregon to Vancouver, BC to constrain possible ground-motion intensities experienced in the 1700 CE earthquake. The forward predictions indicate that liquefaction in M9 events could be pervasive in the region and affect numerous population hubs, with the potential for damage across hundreds of square kilometers. The backward analyses suggest that 1700 CE ground-motion intensities may have been less than expected from M9 simulations in some northern portions of the CSZ (e.g. Seattle), given the paucity of 1700 CE liquefaction evidence in these areas. Ultimately, further discovery and analysis of CSZ paleoliquefaction, or lack thereof, will confirm or modify this possibility and the conclusions drawn herein.

Oregon, Washington↗
USGS2012

Development of vegetation based soil quality indices for mineralized terrane in arid and semi-arid regions

Soil quality indices (SQIs) are often management driven and attempt to describe key relationships between above- and below-ground parameters. In terrestrial systems, indices that were initially developed and modified for agroecosystems have been applied to non-agricultural systems in increasing number. We develop an SQI in arid and semi-arid ecosystems of the Western US impacted by different types of geologic mineralization using the relationship between vegetation community parameters and soil abiotic and biotic properties. We analyze these relations in soils associated with three different mineralization types: podiform chromite, Cu/Mo porphyry, and acid-sulfate gold vein systems at four different sites in California and Nevada. Soil samples were collected from undisturbed soils in both mineralized and nearby unmineralized substrates as well as from waste rock and tailings. Aboveground net primary productivity (ANPP), canopy cover and shrub density were measured for the vegetative communities. Minimum data sets were developed based on correlations between the soil and vegetation parameters, refined using principal components analysis, scored using non-linear functions, and combined into an overall SQI. The indices are comprised of one or two microbial parameters and three to six abiotic parameters, the latter consisting of nutrients and metals. Given the preliminary development of this approach, the parameters and combinations to arrive at an SQI for a given site cannot at this time be correlated or compared with that of another site. This SQI approach provides a means of quantifying disturbed ecosystem recovery resulting from mining, and could be applied to other disturbances in a way that readily distills the information for potential use by land managers. However, severely disturbed areas with little to no aboveground biomass, such as unreclaimed tailings, have likely crossed an ecological threshold that precludes the use of this type of monitoring tool.

California↗
USGS2026

Fully contained laboratory earthquakes: The effect of asperity aspect ratio and free surfaces

Corner frequency ( f c ) and seismic moment ( M 0 ) are key parameters derived from seismic signals that are used to characterize earthquake stress drop, rupture area, and slip. These parameters are also affected by fault geometry and boundary conditions. However, the systematic study of these effects in laboratory settings has been challenging. This study presents laboratory earthquake experiments that examine how rupture dynamics are influenced by (a) the aspect ratio of rectangular PMMA velocity-weakening (VW) asperities surrounded by the Teflon velocity-strengthening (VS) patches, and (b) whether the sides of a VW asperity are confined with VS patches or are free surfaces. We found that increasing confinement by reducing free surfaces or increasing the VW asperity aspect ratio stabilizes fault slip, so that higher normal stress is required to transition from aseismic to seismic slip. Increased confinement and high aspect ratios also reduced M 0 and increased f c , both of which were determined from the radiated seismic waves. M 0 and f c were primarily controlled by the shorter dimension of the VW asperity. Analysis of high-frequency acoustic emission signals revealed that ruptures on high-aspect-ratio VW asperities propagated more unidirectionally, whereas ruptures on square VW asperities were more complex. Further, the high-aspect-ratio asperities were more likely to be eroded by surrounding VS regions while low-aspect-ratio asperities were more likely to rupture into the VS surroundings. These results demonstrate that both the confinement from surrounding stable areas and the geometry of the seismogenic patch can affect rupture nucleation, propagation, and seismic source characteristics.

JGR Solid Earth↗
USGS2025

Exploration for blind geothermal systems in the eastern Great Basin of Utah: An update on the “Lund North” INGENIOUS detailed study site

Existing geothermal production in Utah is commonly collocated with surficial expressions of geothermal heat including active hot springs and hot spring deposits. However, geothermal potential across the Great Basin region is thought to be much higher for hidden or blind geothermal systems. Accordingly, exploration techniques that can locate geothermal resources that lack surface thermal features could support future development of these systems. The goal of the INGENIOUS project is to reduce exploration risk and discover new, economically viable hidden geothermal systems in the Great Basin region. This paper summarizes the efforts and preliminary results of blind geothermal resource prospecting in Utah as part of the larger INGENIOUS project. The Lund North site in the Basin and Range province of southwest Utah was designated as the fourth detailed study site for the project. The site was initially identified from the preliminary Play Fairway Analysis (PFA) geothermal favorability map, which is based on various data elements, and the identification of favorable structural settings across Utah. This site contains existing legacy data including a thermal gradient borehole with a heat-flow value exceeding 220 mW/m 2 . New data collected at this site include terrestrial gravity, magnetotellurics, transient electromagnetics, fluid geochemistry, geologic mapping, UAV-based lidar, paleomagnetism, aeromagnetic surveys, and a shallow temperature survey. Preliminary data and model interpretations corroborate the presence of a large, east-dipping, northeast-southwest-trending normal fault on the edge of a typical Basin and Range graben. Quaternary fault mapping refined by high-resolution lidar surveys suggests a complex step over fault geometry. Utilizing multi-disciplinary datasets for further site assessment at Lund North will facilitate the development of a local-scale PFA and geothermal conceptual model. This new data will be used to site successive thermal gradient drilling to verify heat flow with temperatures at depth at the Lund North site and further investigate the existence of a local geothermal system.

Utah↗
USGS2026

The geologic history of the Chehalis Forearc Basin, Washington State, USA

The Chehalis basin is located between the Cascade arc and the Coast Range in southwest Washington State. It consists of sedimentary and volcanic rocks deposited throughout the Cenozoic and is underlain by the Siletzia terrane, a thick, large igneous province accreted in the Eocene. Here, we constrain evolution of the Chehalis basin depocenter using isochore maps derived from isostatic gravity anomalies, borehole data, and stratigraphy for several time periods: the Eocene (47.6–36.8 Ma), the Oligocene (36.8–20 Ma), and the Neogene (20–0 Ma). Our results suggest that local subsidence is driven by deformation on faults that bound and intersect the basin. We see northward depocenter migration, interpreted as a shift in deformation from the northwest striking Cedar Creek fault to the west striking Doty fault. We interpret these data in terms of the long-term north-south shortening and clockwise rotation of the Cascadia forearc. During the Eocene, the Cedar Creek fault was preferentially aligned with north-south shortening, but became less active when clockwise rotation brought the Doty fault into east-west alignment with the stress field. Sediment accumulation rates decreased from 196 m/Myr in the Paleogene (∼40–20 Ma) to 27 m/Myr in the Neogene (∼20–0 Ma) as Miocene uplift of the Coast Range limited accommodation space and shifted the depositional environment from marine to fluvial. Our results are consistent with the geologic evolution of the Portland and Tualatin basins to the south and reveal a depositional and structural history uniquely shaped by clockwise rotation of the Cascadia forearc.

Washington↗
USGS2026

Cruise summary—Samoa Basin abyssal mapping—Box coring leg, Pago Pago, Territory of American Samoa to Pago Pago, American Samoa, April 11– May 1, 2026

Expedition Summary U.S. Geological Survey scientists led a box coring effort to the Samoa Basin to characterize minerals and the surrounding abyssal sediments and fauna. Thirty-eight box cores were deployed between April 13, 2026, and April 28, 2026. Thirty-six box cores recovered sufficient material to determine nodule density, and 35 recovered sufficient material for subcores to be collected. The purpose of this Data Report is to provide a summary of samples collected, initial results that were obtained shipboard, and briefly mention planned future analyses from this expedition.

Data Report↗
USGS2025

Preliminary field report of landslide hazards following Hurricane Helene

Executive Summary This report reflects our knowledge regarding the widespread landslide activity associated with Hurricane Helene observed during the U.S. Geological Survey’s (USGS) mission assignment to North Carolina in October 2024. The material in this report was originally prepared for the Federal Emergency Management Agency under mission assignment DR-4827-NC. The data and commentary in this report are reflective of a report provided to the Federal Emergency Management Agency (FEMA) on October 18, 2024, as well as information provided in briefings at the Buncombe County Emergency Operations Center. The report has been modified for public dissemination. This assessment was based on systematic visual examination and mapping of landslide locations from aerial and satellite imagery, visual and photographic observations from low-level helicopter overflights and conversations with local landslide experts from the North Carolina Geological Survey and Appalachian Landslide Consultants PLLC, and more than 50 years of combined landslide hazard professional experience of the mission-assigned field team. No systematic field investigations were done by the USGS. While responding to the event, the USGS did not identify any landslides that posed an immediate major threat to recovery personnel in parts of nine counties in North Carolina (Avery, Buncombe, Henderson, McDowell, Mitchell, Polk, Rutherford, Watauga, and Yancey); however, threats from renewed landslide activity may remain heightened in localized areas for months or even years. Known areas of the most abundant landslide occurrence include Bat Cave, Lake Lure, Chimney Rock, Swannanoa, Black Mountain, Fairview, steep areas in Asheville, and the Blue Ridge Parkway. The USGS shared detailed locations of known landslides with the Emergency Operations Centers. The thousands of landslide scars on hillsides and landslide deposits on flatter ground may present some threat to recovery activities. Soil and rocks will continue to erode from newly exposed landslide scars and may pose a threat to people and infrastructure who are immediately nearby. In general, the steeper and taller the landslide scar, the greater the potential threat. This threat is heightened during periods of rainfall and increases with the duration and intensity of rainstorms. Very heavy rainfall, or repeated rainfall events during short periods, could also initiate new landslides on steep slopes. Excavation of landslide deposits, particularly excavation of those deposits directly adjacent to steep slopes, may also pose a threat to nearby people and equipment. An interagency collaborative mapping effort led by the USGS that informed this assessment identified 1,155 landslide locations by the October 2024 briefings, but that number increased to 2,217 in a final reviewed version of the locations published in January 2025. Locations were mapped from satellite imagery, fixed-wing and helicopter surveys, media and social media, and field reports in the 3 weeks following the passage of the remnants of Hurricane Helene. USGS products outlined in this report are publicly available and include geotagged photographs from aerial reconnaissance, hazard models, an interactive view of mapped landslide locations, and landslide safety and education resources.

North Carolina, South Carolina, Tennessee, Virgini↗
USGS2025

Woods Hole Coastal and Marine Science Center—2023 annual report

The 2023 annual report of the U.S. Geological Survey Woods Hole Coastal and Marine Science Center highlights accomplishments of 2023, includes a list of 2023 publications, and summarizes the work of the center, as well as the work of each of its science groups. This product allows readers to gain a general understanding of the focus areas of the center’s scientific research and learn more about specific projects and progress made throughout 2023, all while enjoying photographs taken in various environments and laboratories, and applicable maps and figures.

Circular↗
USGS2026

Woods Hole Coastal and Marine Science Center—2024 annual report

The 2024 annual report of the U.S. Geological Survey Woods Hole Coastal and Marine Science Center highlights accomplishments of 2024, includes a list of 2024 publications, and summarizes the work of the center, as well as the work of each of its science groups. This product allows readers to gain a general understanding of the focus areas of the center’s scientific research and learn more about specific projects and progress made throughout 2024, all while enjoying photographs taken in various environments and laboratories, and applicable maps and figures.

Circular↗
USGS2026

Quantitative mineral resource assessment of lithium pegmatite deposits in the southern Appalachian orogen

The first quantitative mineral resource assessment for undiscovered lithium pegmatite deposits in the southern Appalachian region of the United States was conducted. Permissive tracts for lithium pegmatite deposits were delineated by integrating lithological, tectonic, geochemical, geophysical and mineral occurrence data. Lithium pegmatite prospectivity of the tracts was ranked with simplified mappable criteria, including proximity to Paleozoic felsic intrusions and major lithotectonic structures, stream sediment geochemical anomalies, and pegmatite occurrence data. The geospatial data and permissive tracts were used to estimate the number of undiscovered lithium pegmatite deposits. These estimates were integrated into probabilistic simulations along with a new global lithium pegmatite grade and tonnage dataset to quantify potential contained undiscovered lithium resources. An economic filter was applied to convert the probabilistic estimates of contained lithium into recoverable material. The identified lithium pegmatite resources for the Carolina Lithium and Kings Mountain deposits, North Carolina, contain 1589 thousand tons (kt) of Li 2 O. The median contained undiscovered resource for the southern Appalachian orogen was estimated to be 2240 kt Li 2 O. At 90% confidence, the region contains at least 130 kt Li 2 O, and 10,700 kt at 10% confidence. After applying economic filters, the median recoverable contained resource was 1430 kt Li 2 O, corresponding to approximately 201 years of current lithium imports for consumption in the United States. North and South Carolina are likely to contain most of these resources. Coarse data resolution and intra-state variations in the geological data contribute to uncertainty of undiscovered lithium pegmatite resources. Continued efforts to harmonize disparate geospatial datasets with updated or new information can improve the accuracy and precision of estimated undiscovered lithium pegmatite resources in the study area and at broader scales.

Alabama, Georgia, Maryland, North Carolina, South ↗
USGS2024

Methodology for inclusion of produced and stored carbon dioxide in the U.S. Geological Survey Federal lands greenhouse gas inventory

The U.S. Geological Survey (USGS) has developed two new carbon dioxide (CO2) emissions and sequestration accounting methods for use in future reports. The first method is a Federal lease-produced CO2 emissions calculation for an update of the report, “Federal Lands Greenhouse Gas Emissions and Sequestration in the United States.” The methodology to incorporate Federal lease CO2 production emissions into the updated report relies on CO2 sales royalty data from the Office of Natural Resources Revenue (ONRR). The end usage points for the gas include enhanced oil recovery with CO2 (CO2-EOR), food and beverage, and chemical production. CO2-EOR is the main end point for natural CO2 production in the United States; it accounted for 94% of usage in 2022 [1]. Federal lands emissions from this sector are estimated at 460 metric tons of CO2 in 2022, a very small amount relative to most other Federal lands emissions sector estimates. The second new method, planned for a separate report, is a calculation of the geologic storage of CO2 on Federal lands. The second method estimates the CO2 stored under Federal surface lands and documents Federal climate change mitigation efforts. Currently, there is no storage of CO2 at an industrial level on Federal lands, however multiple proposals and projects are planned. This method was developed on non-Federal lands datasets in an effort to prepare for when these activities on Federal lands will require accounting. National estimates for CO2 geologic storage using this method, but without a Federal lands filtering step, totaled 8.0 million metric tons (Mt) in 2022. The two methods described here are new benchmark methods in a collection of accounting procedures to document the current state of greenhouse gas emissions and their storage on Federal lands. These benchmarks can then be used to measure any subsequent changes in emissions from or carbon storage beneath Federal lands. While the magnitude of the values is currently non-existent to small, emissions mitigation goals established by decision makers indicate that these values will grow, and their documentation will take on greater value and use.

continental United States↗