SEARCH · Geology Reports

Results for “Review Report”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,279 records · Page 71Linked to original sources

USGS1988

Mines, prospects, and mineral sites, wilderness and RARE II areas, White Mountain National Forest, New Hampshire

The Wilderness Act (Public Law 88-577, September 3, 1964) and related acts require the U.S. Geological Survey and the U.S. Bureau of Mines to survey certain areas on Federal lands to determine their mineral value, if any, that may be present. Results must be made available to the public and be submitted to the President and the Congress. This report presents the results of investigations of mines, prospects, and mineral sites in the Great Gulf and Presidential Range-Dry River Wilderness Areas; the Dartmouth Range, Wild River, Pemigewasset, Kinsman Mountain, Mount Wolf-Gordon Pond, Jobildunk, and Carr Mountain Roadless Areas; and the intervening and immediately surrounding areas in the White Mountain National Forest, Coos, Grafton, and Carroll Counties, New Hampshire. The Great Gulf Wilderness was established when the Wilderness Act was passed in 1964, and the Presidential Range-Dry River Wilderness was established by Public Law 93-622, January 3, 1975. The Dartmouth Range, Wild River, Pemigewasset, Kinsman Mountain, Mount Wolf-Gordon Pond, Carr Mountain, and Jobildunk areas were classified as a further planning area during the Second Roadless Area Review and Evaluation (RARE II) by the U.S. Forest Service, January 1979. The areas investigated are located in the White Mountain National Forest in Coos, Grafton, and Carroll Counties, New Hampshire. Personnel from the U.S. Bureau of Mines conducted field reconnaissance of the westernmost areas, Kinsman Mountain, Mt. Wolf-Gordon Pond, Jobildunk, and Carr Mountain, in the fall of 1980. Field reconnaissance of the eastern areas, Great Gulf, Presidential Range-Dry River, Dartmouth Range, Pemigewasset and Wild River was conducted in the spring of 1981. A total of 237 rock and 103 panned-concentrate samples were collected during the investigations. Reconnaissance radiometric ground surveys were conducted at selected locations.

New Hampshire↗

USGS2002

Water quality and aquatic toxicity data of 2002 spring thaw conditions in the upper Animas River watershed, Silverton, Colorado

This report presents hydrologic, water-quality, and biologic toxicity data collected during the annual spring thaw of 2002 in the upper Animas River watershed near Silverton, Colorado. The spring-thaw runoff is a concern because elevated concentrations of iron oxyhydroxides can contain sorbed trace metals that are potentially toxic to aquatic life. Water chemistry of streams draining the San Juan Mountains is affected by natural acid drainage and weathering of hydrothermal altered volcanic rocks and by more than a century of mining activities. The timing of the spring-thaw sampling effort was determined by reviewing historical climate and stream-flow hydrographs and current weather conditions. Twenty-one water-quality samples were collected between 11:00 AM March 27, 2002 and 6:00 PM March 30, 2002 to characterize water chemistry at the A-72 gage on the upper Animas River below Silverton. Analyses of unfiltered water at the A-72 gage showed a relation between turbidity and total-recoverable iron concentrations, and showed diurnal patterns. Copper and lead concentrations were related to iron concentrations, indicating that these elements are probably sorbed to colloidal iron material. Calcium, strontium, and sulfate concentrations showed overall decreasing trends due to dilution, but the loads of those constituents increased over the sampling period. Nine water-quality samples were collected near the confluence of Mineral Creek with the Animas River, the confluence of Cement Creek with the Animas River, and on the upper Animas River above the confluence with Cement Creek (three samples at each site). A total of six bulk water-toxicity samples were collected before, during, and after the spring thaw from the Animas River at the A-72 gage site. Toxicity tests conducted with the bulk water samples on amphipods did not show strong differences in toxicity among the three sampling periods; however, toxicity of river water to fathead minnows showed a decreasing trend during the course of the study.

Colorado↗

USGS2011

Mars Global Digital Dune Database (MGD3): North polar region (MC-1) distribution, applications, and volume estimates

The Mars Global Digital Dune Database (MGD 3 ) now extends from 90°N to 65°S. The recently released north polar portion (MC‐1) of MGD 3 adds ~844 000 km 2 of moderate‐ to large‐size dark dunes to the previously released equatorial portion (MC‐2 to MC‐29) of the database. The database, available in GIS‐ and tabular‐format in USGS Open‐File Reports, makes it possible to examine global dune distribution patterns and to compare dunes with other global data sets (e.g. atmospheric models). MGD 3 can also be used by researchers to identify areas suitable for more focused studies. The utility of MGD 3 is demonstrated through three example applications. First, the uneven geographic distribution of the dunes is discussed and described. Second, dune‐derived wind direction and its role as ground truth for atmospheric models is reviewed. Comparisons between dune‐derived winds and global and mesoscale atmospheric models suggest that local topography may have an important influence on dune‐forming winds. Third, the methods used here to estimate north polar dune volume are presented and these methods and estimates (1130 km 3 to 3250 km 3 ) are compared with those of previous researchers (1158 km 3 to 15 000 km 3 ). In the near future, MGD 3 will be extended to include the south polar region.

Earth Surface Processes and Landforms↗

USGS2003

Environmental fate and effects of the lampricide Bayluscide: A review

Bayluscide is an additive to TFM that increases the effectiveness of TFM as a lampricide. A review of the literature was undertaken to determine the environmental fate and effects of Bayluscide. Niclosamide (2′, 5-dichloro-4′-nitrosalicylanilide), the active ingredient of Bayluscide, degrades rapidly in natural water and sediment systems, however, the rate of degradation is very slow in autoclaved samples. This difference suggests that degradation under laboratory conditions is dependent on microbial activity and hydrolysis plays a minor role in degradation of niclosamide. The major degradation product of niclosamide has been reported to be aminoniclosamide (2′,5-dichloro-4′-aminosalicylanilide), which represented more than 50% of the residues extractable from sediments. Significantly more of the chemical is adsorbed to sediments with higher organic content and at lower pH's. The mobility of niclosamide in soil can be characterized as slight to medium; the estimated leaching distance would range from 0 to > 25 cm depending on the soil type and pH. The active ingredient of Bayluscide (niclosamide) is decomposed by ultra-violet light depending on the intensity and duration of the exposure. The uptake of residues by most invertebrates exposed to 14 C-niclosamide is fairly rapid and equilibrium is reached within 24 h. About 90% of the accumulated residues were lost within 48 h after the organisms were transferred to clean flowing water. As with invertebrates, fish rapidly accumulate and eliminate residues of niclosamide. Three distinct residues were isolated from the extracts of edible fillet tissue; parent niclosamide, the glucuronide conjugate of niclosamide, and the sulfate ester of niclosamide. Aquatic plants and agricultural crops do not appear to be adversely affected at concentrations of Bayluscide used for lamprey or snail control. Mayflies ( Hexagenia sp .). tend to be susceptible to TFM, but are relatively resistant to the effects of exposure to Bayluscide. Bayluscide was originally developed as a molluscicide to eliminate snails. Therefore, it is not surprising that mollusks are extremely sensitive to Bayluscide. Oral, dermal, and ocular administration of Bayluscide to mammals resulted in no clinical signs of systemic toxicity. Tests of the chronic effects of Bayluscide indicated that it is not mutagenic or carcinogenic. Bayluscide is not persistent in the environment; it breaks down in natural water and sediment systems through hydrolysis, photolysis, and microbial degradation. Given the limited use and tight control maintained by the U.S. Fish and Wildlife Service during applications of lampricides, Bayluscide presents minimal risk to human health and safety of the environment.

Conference Paper↗

USGS2003

Environmental fate and effects of the lampricide bayluscide: a review

Bayluscide is an additive to TFM that increases the effectiveness of TFM as a lampricide. A review of the literature was undertaken to determine the environmental fate and effects of Bayluscide. Niclosamide (2', 5-dichloro-4'-nitrosalicylanilide), the active ingredient of Bayluscide, degrades rapidly in natural water and sediment systems, however, the rate of degradation is very slow in autoclaved samples. This difference suggests that degradation under laboratory conditions is dependent on microbial activity and hydrolysis plays a minor role in degradation of niclosamide. The major degradation product of niclosamide has been reported to be aminoniclosamide (2',5-dichloro-4'-aminosalicylanilide), which represented more than 50% of the residues extractable from sediments. Significantly more of the chemical is adsorbed to sediments with higher organic content and at lower pH's. The mobility of niclosamide in soil can be characterized as slight to medium; the estimated leaching distance would range from 0 to > 25 cm depending on the soil type and pH. The active ingredient of Bayluscide (niclosamide) is decomposed by ultra-violet light depending on the intensity and duration of the exposure. The uptake of residues by most invertebrates exposed to super(14)C-niclosamide is fairly rapid and equilibrium is reached within 24 h. About 90% of the accumulated residues were lost within 48 h after the organisms were transferred to clean flowing water. As with invertebrates, fish rapidly accumulate and eliminate residues of niclosamide. Three distinct residues were isolated from the extracts of edible fillet tissue; parent niclosamide, the glucuronide conjugate of niclosamide, and the sulfate ester of niclosamide. Aquatic plants and agricultural crops do not appear to be adversely affected at concentrations of Bayluscide used for lamprey or snail control. Mayflies (Hexagenia sp.). tend to be susceptible to TFM, but are relatively resistant to the effects of exposure to Bayluscide. Bayluscide was originally developed as a molluscicide to eliminate snails. Therefore, it is not surprising that mollusks are extremely sensitive to Bayluscide. Oral, dermal, and ocular administration of Bayluscide to mammals resulted in no clinical signs of systemic toxicity. Tests of the chronic effects of Bayluscide indicated that it is not mutagenic or carcinogenic. Bayluscide is not persistent in the environment; it breaks down in natural water and sediment systems through hydrolysis, photolysis, and microbial degradation. Given the limited use and tight control maintained by the U.S. Fish and Wildlife Service during applications of lampricides, Bayluscide presents minimal risk to human health and safety of the environment.

Journal of Great Lakes Research↗

USGS1992

Relating results from earthworm toxicity tests to agricultural soil

The artificial soil tests of the European Economic Community and of the Organization for Economic Cooperation produce data relating earthworm mortality to pesticide concentrations in soil under laboratory conditions. To apply these results to agricultural soils it is necessary to relate these concentrations to amounts of pesticide applied per area. This paper reviews the relevant published literature and suggests a simple relation for regulatory use. Hazards to earthworms from pesticides are suggested to be greatest soon after application, when the pesticides may be concentrated in a soil layer a few millimeters thick. For estimating exposure of earthworms, however, a thicker soil layer should be considered, to account for their movement through soil. During favorable weather conditions, earthworms belonging to species appropriate to the artificial soil test have been reported to confine their activity to a layer about 5 cm. If a 5-cm layer is accepted as relevant for regulatory purposes, then an application of 1 kg/ha would be equivalent to 1-67 ppm (dry) in the artificial soil test.

Book chapter↗

USGS1990

Isopach map of the interval from surface elevation to the top of the Pennsylvanian and Permian Minnelusa Formation and equivalents, Powder River basin, Wyoming and Montana

This map is one in a series of U.S. Geological Survey Miscellaneous Field Studies (MF) maps showing computer-generated structure contours, isopachs, and cross sections of selected formations in the Powder River basin, Wyoming and Montana. The map and cross sections were constructed from information stored in a U.S. Geological Survey Evolution of Sedimentary Basins data base. This data base contains picks of geologic formation and (or) unit tops and bases determined from electric resistivity and gamma-ray logs of 8,592 wells penetrating Tertiary and older rocks in the Powder River basin. Well completion cards (scout tickets) were reviewed and compared with copies of all logs, and formation or unit contacts determined by N. M. Denson, D.L. Macke, R. R. Schumann and others. This isopach map is based on information from 1,480 of these wells that penetrate the Minnelusa Formation and equivalents.

Montana, Wyoming↗

USGS1990

Map showing contours on the top of the Pennsylvanian and Permian Minnelusa Formation and equivalents, Powder River basin, Wyoming and Montana

Montana, Wyoming↗

USGS1991

Map showing structure contours on the top of the upper Jurassic Morrison Formation, Powder River basin, Wyoming and Montana

This map is one in a series of U.S. Geological Survey Miscellaneous Field Studies (MF) maps showing computer-generated structure contours, isopachs, and cross sections of selected formations in the Powder River basin, Wyoming and Montana. The map and cross sections were constructed from information stored in a U.S. Geological Survey Evolution of Sedimentary Basins data base. This data base contains picks of geologic formation and (or) unit tops and bases determined from electric resistivity and gamma-ray logs of 8,592 wells penetrating Tertiary and older rocks in the Powder River basin. Well completion cards (scout tickets) were reviewed and compared with copies of all logs, and formation or unit contacts determined by N. M. Denson, D.L. Macke, R. R. Schumann and others. This isopach map is based on information from 2,429 of these wells that penetrate the Minnelusa Formation and equivalents.

Montana;Wyoming↗

USGS1991

Map showing contours on top of the upper Cretaceous Mowry Shale, Powder River basin, Wyoming and Montana

This map is one in a series of U.S. Geological Survey Miscellaneous Field Studies (MF) maps showing computer-generated structure contours, isopachs, and cross sections of selected formations in the Powder River basin, Wyoming and Montana. The map and cross sections were constructed from information stored in a U.S. Geological Survey Evolution of Sedimentary Basins data base. This data base contains picks of geologic formation and (or) unit tops and bases determined from electric resistivity and gamma-ray logs of 8,592 wells penetrating Tertiary and older rocks in the Powder River basin. Well completion cards (scout tickets) were reviewed and compared with copies of all logs, and formation or unit contacts determined by N. M. Denson, D.L. Macke, R. R. Schumann and others. This isopach map is based on information from 4,926 of these wells that penetrate the Minnelusa Formation and equivalents.

Montana, Wyoming↗

USGS2018

Guidelines for determining flood flow frequency — Bulletin 17C

Accurate estimates of flood frequency and magnitude are a key component of any effective nationwide flood risk management and flood damage abatement program. In addition to accuracy, methods for estimating flood risk must be uniformly and consistently applied because management of the Nation’s water and related land resources is a collaborative effort involving multiple actors including most levels of government and the private sector. Flood frequency guidelines have been published in the United States since 1967, and have undergone periodic revisions. In 1967, the U.S. Water Resources Council presented a coherent approach to flood frequency with Bulletin 15, “A Uniform Technique for Determining Flood Flow Frequencies.” The method it recommended involved fitting the log-Pearson Type III distribution to annual peak flow data by the method of moments. The first extension and update of Bulletin 15 was published in 1976 as Bulletin 17, “Guidelines for Determining Flood Flow Frequency” (Guidelines). It extended the Bulletin 15 procedures by introducing methods for dealing with outliers, historical flood information, and regional skew. Bulletin 17A was published the following year to clarify the computation of weighted skew. The next revision of the Bulletin, the Bulletin 17B, provided a host of improvements and new techniques designed to address situations that often arise in practice, including better methods for estimating and using regional skew, weighting station and regional skew, detection of outliers, and use of the conditional probability adjustment. The current version of these Guidelines are presented in this document, denoted Bulletin 17C. It incorporates changes motivated by four of the items listed as “Future Work” in Bulletin 17B and 30 years of post-17B research on flood processes and statistical methods. The updates include: adoption of a generalized representation of flood data that allows for interval and censored data types; a new method, called the Expected Moments Algorithm, which extends the method of moments so that it can accommodate interval data; a generalized approach to identification of low outliers in flood data; and an improved method for computing confidence intervals. Federal agencies are requested to use these Guidelines in all planning activities involving water and related land resources. State, local, and private organizations are encouraged to use these Guidelines to assure uniformity in the flood frequency estimates that all agencies concerned with flood risk should use for Federal planning decisions. This revision is adopted with the knowledge and understanding that review of these procedures will be ongoing. Updated methods will be adopted when warranted by experience and by examination and testing of new techniques.

Georgia↗

USGS1977

Status, distribution, and movements of martens in northeastern Minnesota

The decline of martens in Minnesota is reviewed and a recent increase documented. Adjacent and partially overlapping home ranges of 4.3 to 19.9 sq km were determined by telemetry for a female and three males. Habitat use is described. If current trapping and timber management practices persist, martens should continue to increase.

Research Paper↗

USGS2000

Proceedings of a workshop concerning walrus survey methods

In March 2000, the U.S. Fish and Wildlife Service and U.S. Geological Survey hosted a workshop to evaluate various techniques and approaches to estimate the size and trend of the Pacific walrus population. Workshop participants included American and Russian experts in walrus biology and survey design, subsistence hunters, and resource managers. Workshop participants reviewed previous efforts to survey the Pacific walrus population and identified problems that were encountered in designing and conducting those surveys. The group also summarized survey conditions by season and evaluated potential tools and techniques for surveying walrus populations.

Fish and Wildlife Technical Report↗

USGS2022

Workshops report for mesophotic and deep benthic community fish, mobile invertebrates, sessile invertebrates and infauna

Two workshops with subject matter experts in the appropriate fields, were held in November and December 2021 to elicit guidance and feedback from the broader mesophotic and deep benthic scientific community. These workshops focused on best practices/approaches and identifying data gaps relative to habitat assessment and evaluation goals of the Mesophotic and Deep Benthic Community (MDBC) restoration portfolio. The first workshop was a combined effort of the Habitat Assessment and Evaluation (HAE) Project Team and the Deepwater Horizon (DWH) Program. Industrial Economics, Inc. (IEc) provided extensive workshop planning, organizing, execution, and facilitation support during all stages of the workshop. Based on a questionnaire sent to scientists in August, 2021, the workshop focused on fish and mobile invertebrate habitat associations, abundance trends, community metrics, and food web functionality. Topical presentations and discussions focused not only on demersal fish and mobile invertebrates that are directly associated with mesophotic and deep benthic habitats, but also considered water column species and communities that benefit from these habitats more broadly. The second workshop, intended to complement the first workshop, focused on identifying best practices and critical information gaps for key community metrics, larval dispersal modeling, connectivity, effects and variability of environmental parameters, and recovery trajectories of corals, infauna, and other sessile invertebrates. Through literature review, internal HAE scientists considered these topics to be critical for restoration success. Products from the literature review included topical summaries (see Appendix B) that summarized the current state-of-the-science and provided the framework for the workshop. Information generated from the workshops will assist the MDBC HAE Project, and more broadly the DWH Program, identify data gaps and develop a suite of best practices for restoration activities.

DWH MDBC Summary Report↗

USGS2010

Estimation of magnitude and frequency of floods in urban basins in Missouri

Streamgage flood-frequency analyses were done for 35 streamgages on urban streams in and adjacent to Missouri for estimation of the magnitude and frequency of floods in urban areas of Missouri. A log-Pearson Type-III distribution was fitted to the annual series of peak flow data retrieved from the U.S. Geological Survey National Water Information System. For this report, the flood frequency estimates are expressed in terms of percent annual exceedance probabilities of 50, 20, 10, 4, 2, 1, and 0.2. Of the 35 streamgages, 30 are located in Missouri. The remaining five non-Missouri streamgages were added to the dataset to improve the range and applicability of the regression analyses from the streamgage frequency analyses. Ordinary least-squares was used to determine the best set of independent variables for the regression equations. Basin characteristics selected for independent variables into the ordinary least-squares regression analyses were based on theoretical relation to flood flows, literature review of possible basin characteristics, and the ability to measure the basin characteristics using digital datasets and geographic information system technology. Results of the ordinary least-squares were evaluated on the basis of Mallow's Cp statistic, the adjusted coefficient of determination, and the statistical significance of the independent variables. The independent variables of drainage area and percent impervious area were determined to be statistically significant and readily determined from existing digital datasets. The drainage area variable was computed using the best elevation data available, either from a statewide 10-meter grid or high-resolution elevation data from urban areas. The impervious area variable was computed from the National Land Cover Dataset 2001 impervious area dataset. The National Land Cover Dataset 2001 impervious area data for each basin was compared to historical imagery and 7.5-minute topographic maps to verify the national dataset represented the urbanization of the basin at the time streamgage data were collected. Eight streamgages had less urbanization during the period of time streamflow data were collected than was shown on the 2001 dataset. The impervious area values for these eight urban basins were adjusted downward as much as 23 percent to account for the additional urbanization since the streamflow data were collected. Weighted least-squares regression techniques were used to determine the final regression equations for the statewide urban flood-frequency equations. Weighted least-squares techniques improve regression equations by adjusting for different and varying lengths in streamflow records. The final flood-frequency equations for the 50-, 20-, 10-, 4-, 2-, 1-, and 0.2-percent annual exceedance probability floods for Missouri provide a technique for estimating peak flows on urban streams at gaged and ungaged sites. The applicability of the equations is limited by the range in basin characteristics used to develop the regression equations. The range in drainage area is 0.28 to 189 square miles; range in impervious area is 2.3 to 46.0 percent. Seven of the 35 selected streamgages were used to compare the results of the existing rural and urban equations to the urban equations presented in this report for the 1-percent annual exceedance probability. Results of the comparison indicate that the estimated peak flows for the urban equation in this report ranged from 3 to 52 percent higher than the results from the rural equations. Comparing the estimated urban peak flows from this report to the existing urban equation developed in 1986 indicated the range was 255 percent lower to 10 percent higher. The overall comparison between the current (2010) and 1986 urban equations indicates a reduction in estimated peak flow values for the 1-percent annual exceedance probability flood.

Missouri↗

USGS2013

Evaluation of the groundwater-flow model for the Ohio River alluvial aquifer near Carrollton, Kentucky, updated to conditions in September 2010

The Ohio River alluvial aquifer near Carrollton, Ky., is an important water resource for the cities of Carrollton and Ghent, as well as for several industries in the area. The groundwater of the aquifer is the primary source of drinking water in the region and a highly valued natural resource that attracts various water-dependent industries because of its quantity and quality. This report evaluates the performance of a numerical model of the groundwater-flow system in the Ohio River alluvial aquifer near Carrollton, Ky., published by the U.S. Geological Survey in 1999. The original model simulated conditions in November 1995 and was updated to simulate groundwater conditions estimated for September 2010. The files from the calibrated steady-state model of November 1995 conditions were imported into MODFLOW-2005 to update the model to conditions in September 2010. The model input files modified as part of this update were the well and recharge files. The design of the updated model and other input files are the same as the original model. The ability of the updated model to match hydrologic conditions for September 2010 was evaluated by comparing water levels measured in wells to those computed by the model. Water-level measurements were available for 48 wells in September 2010. Overall, the updated model underestimated the water levels at 36 of the 48 measured wells. The average difference between measured water levels and model-computed water levels was 3.4 feet and the maximum difference was 10.9 feet. The root-mean-square error of the simulation was 4.45 for all 48 measured water levels. The updated steady-state model could be improved by introducing more accurate and site-specific estimates of selected field parameters, refined model geometry, and additional numerical methods. Collection of field data to better estimate hydraulic parameters, together with continued review of available data and information from area well operators, could provide the model with revised estimates of conductance values for the riverbed and valley wall, hydraulic conductivities for the model layer, and target water levels for future simulations. Additional model layers, a redesigned model grid, and revised boundary conditions could provide a better framework for more accurate simulations. Additional numerical methods would identify possible parameter estimates and determine parameter sensitivities.

Kentucky↗

USGS2012

Structures data collection for the national map using volunteered geographic information

The U.S. Geological Survey (USGS) has historically sponsored volunteered data collection projects to enhance its topographic paper and digital map products. This report describes one phase of an ongoing project to encourage volunteers to contribute data to The National Map using online editing tools. The USGS recruited students studying geographic information systems (GIS) at the University of Colorado Denver and the University of Denver in the spring of 2011 to add data on structures - manmade features such as schools, hospitals, and libraries - to four quadrangles covering metropolitan Denver. The USGS customized a version of the online Potlatch editor created by the OpenStreetMap project and populated it with 30 structure types drawn from the Geographic Names Information System (GNIS), a USGS database of geographic features. The students corrected the location and attributes of these points and added information on structures that were missing. There were two rounds of quality control. Student volunteers reviewed each point, and an in-house review of each point by the USGS followed. Nine-hundred and thirty-eight structure points were initially downloaded from the USGS database. Editing and quality control resulted in 1,214 structure points that were subsequently added to The National Map . A post-project analysis of the data shows that after student edit and peer review, 92 percent of the points contributed by volunteers met National Map Accuracy Standards for horizontal accuracy. Lessons from this project will be applied to later phases. These include: simplifying editing tasks and the user interfaces, stressing to volunteers the importance of adding structures that are missing, and emphasizing the importance of conforming to editorial guidelines for formatting names and addresses of structures. The next phase of the project will encompass the entire State of Colorado and will allow any citizen to contribute structures data. Volunteers will benefit from this project by engaging with their local geography and contributing to a national resource of topographic information that remains in the public domain for anyone to download.

Denver↗

USGS2023

Pathology and infectious agents of unionid mussels: A primer for pathologists in disease surveillance and investigation of mortality events

Freshwater mussels are one of the most imperiled groups of organisms in the world, and more than 30 species have gone extinct in the last century. While habitat alteration and destruction have contributed to the declines, the role of disease in mortality events is unclear. In an effort to involve veterinary pathologists in disease surveillance and the investigation of freshwater mussel mortality events, we provide information on the conservation status of unionids, sample collection and processing techniques, and unique and confounding anatomical and physiological differences. We review the published accounts of pathology and infectious agents described in freshwater mussels including neoplasms, viruses, bacteria, fungi, fungal-like agents, ciliated protists, Aspidogastrea, Digenea, Nematoda, Acari, Diptera, and Odonata. Of the identified infectious agents, a single viral disease, Hyriopsis cumingii plague disease, that occurs only in cultured mussels is known to cause high mortality. Parasites including ciliates, trematodes, nematodes, mites, and insects may decrease host fitness, but are not known to cause mortality. Many of the published reports identify infectious agents at the light or ultrastructural microscopy level with no lesion or molecular characterization. Although metagenomic analyses provide sequence information for infectious agents, studies often fail to link the agents to tissue changes at the light or ultrastructural level or confirm their role in disease. Pathologists can bridge this gap between identification of infectious agents and confirmation of disease, participate in disease surveillance to ensure successful propagation programs necessary to restore decimated populations, and investigate mussel mortality events to document pathology and identify causality.

Veterinary Pathology↗