Geology Reports⌕ Search

USGS · 70024712

Environmental fate and effects of the lampricide Bayluscide: A review

Abstract

Bayluscide is an additive to TFM that increases the effectiveness of TFM as a lampricide. A review of the literature was undertaken to determine the environmental fate and effects of Bayluscide. Niclosamide (2′, 5-dichloro-4′-nitrosalicylanilide), the active ingredient of Bayluscide, degrades rapidly in natural water and sediment systems, however, the rate of degradation is very slow in autoclaved samples. This difference suggests that degradation under laboratory conditions is dependent on microbial activity and hydrolysis plays a minor role in degradation of niclosamide. The major degradation product of niclosamide has been reported to be aminoniclosamide (2′,5-dichloro-4′-aminosalicylanilide), which represented more than 50% of the residues extractable from sediments. Significantly more of the chemical is adsorbed to sediments with higher organic content and at lower pH's. The mobility of niclosamide in soil can be characterized as slight to medium; the estimated leaching distance would range from 0 to > 25 cm depending on the soil type and pH. The active ingredient of Bayluscide (niclosamide) is decomposed by ultra-violet light depending on the intensity and duration of the exposure. The uptake of residues by most invertebrates exposed to 14 C-niclosamide is fairly rapid and equilibrium is reached within 24 h. About 90% of the accumulated residues were lost within 48 h after the organisms were transferred to clean flowing water. As with invertebrates, fish rapidly accumulate and eliminate residues of niclosamide. Three distinct residues were isolated from the extracts of edible fillet tissue; parent niclosamide, the glucuronide conjugate of niclosamide, and the sulfate ester of niclosamide. Aquatic plants and agricultural crops do not appear to be adversely affected at concentrations of Bayluscide used for lamprey or snail control. Mayflies ( Hexagenia sp .). tend to be susceptible to TFM, but are relatively resistant to the effects of exposure to Bayluscide. Bayluscide was originally developed as a molluscicide to eliminate snails. Therefore, it is not surprising that mollusks are extremely sensitive to Bayluscide. Oral, dermal, and ocular administration of Bayluscide to mammals resulted in no clinical signs of systemic toxicity. Tests of the chronic effects of Bayluscide indicated that it is not mutagenic or carcinogenic. Bayluscide is not persistent in the environment; it breaks down in natural water and sediment systems through hydrolysis, photolysis, and microbial degradation. Given the limited use and tight control maintained by the U.S. Fish and Wildlife Service during applications of lampricides, Bayluscide presents minimal risk to human health and safety of the environment.

Explore related subjects

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

V. K. Dawson. 2003. Environmental fate and effects of the lampricide Bayluscide: A review. https://doi.org/10.1016/s0380-1330(03)70509-7

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related USGS reports

Authoritative knowledge infrastructure for GeoAI: Implications for scientific spatial data providers

Geospatial Artificial Intelligence (GeoAI) increasingly relies on automated analysis of authoritative geospatial data, exposing limitations in data infrastructures originally designed for simple dissemination rather than for knowledge-driven use. From the perspective of scientific spatial data providers, the challenge is enabling GeoAI responsibly while retaining semantic clarity, provenance, reproducibility, and governance. This short paper (i) examines how GeoAI exposed limitations within existing geospatial data infrastructures, and (ii) identifies provider-side requirements for an authoritative knowledge infrastructure. Drawing on GIScience, scientific workflow, and operational AI literature, the paper outlines implications for national mapping organizations that seek to support advanced analytics without jeopardizing scientific rigor or stewardship responsibilities.

Conference Paper↗

Springs of the Catskill Mountains: A conduit flow system in predominantly siliciclastic strata

The Catskill Mountains of New York state are composed of thick sequences of interbedded mudstone, sandstone, and siltstone that are intercalated with thin beds of paludal limestone and calcareous mudstone. Sandstones often contain rip-up clasts of calcareous material at their bases and contain minor amounts of carbonate cement throughout their mass. This minor amount of calcareous material weathers out to produce thin zones of solutional porosity and permeability integrated within perched aquifers that feed perennial hillslope springs. Solutional features are evident within thin carbonate lenses and along fractures in sandstones, occasionally resulting in explorable cave-sized conduits. This study focuses on the behavior of bedrock springs and seeps in the headwaters of the Neversink River basin above the Neversink Reservoir. Bedrock springs are numerous throughout the Catskill Mountains and serve to provide baseflow to the headwater streams that tends to be more persistent during dry times than other baseflow sources. We observed dissolution-influenced conduits within the bedrock, and suffosional conduits within unconsolidated materials. Continuous water temperature at six springs was monitored at hourly intervals from May to October 2022 to investigate the thermal response of groundwater to daily and seasonal changes in air temperature along with event-based meteorological events. Temperature monitoring was augmented at some springs with time-lapse photography to evaluate persistence of flow. The thermal responses of springs to precipitation events were highly variable across sites, with some springs exhibiting flashy responses indicating a strong connection to the surface, while other springs showed muted or no thermal response to events. The seasonal thermal response also varied across sites having lag times of 23-48 days between peak air temperature and peak spring water temperature. The water temperatures and geochemical compositions of these bedrock springs support a conceptual model of multiple residence times, showing both event and seasonal groundwater storage within the conduit flow system that feeds the springs of the Catskill Mountains.

New York↗

Rapid deglaciation of the Tuolumne Meadows region linked to glacier hypsometry

During the LGM deglaciation (19–11 ka), episodes of glacier retreat and stabilization in the western United States are often attributed to abrupt climate change events via changes in Atlantic Meridional Overturning Circulation (e.g., Becker et al. 2025; McGee et al. 2018; Phillips 2016). However, there is considerable variability in the magnitude and timing of glacier retreat across the western US that is difficult to reconcile with a uniform climate forcing (Marcott et al. 2019), indicating either heterogeneous climate change or the influence of local non-climatic variables, such as glacier hypsometry (Young et al. 2011). Prior work from basal lake radiocarbon ages (Gillespie and Clark 2011) and cosmogenic nuclide dating (Phillips 2016; Phillips et al. 2009; Rood et al. 2011) established that Sierra Nevada glaciers receded from LGM moraines to north-facing cirques between 18 and 15 ka, with most deglaciation occurring at 15.8 ± 0.5 ka. As discussed above, geomorphic evidence supports abrupt glacier stagnation and in situ melting in the Tuolumne Meadows region.

Calfiornia↗