Geology ReportsSearch

SEARCH · Geology Reports

Results for “Marine Mining”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

121 records · Page 7Linked to original sources

Detection of the Diadema antillarum scuticociliatosis Philaster clade on sympatric metazoa, plankton, and abiotic surfaces and assessment for its potential reemergence

A ciliate belonging to the Diadema antillarum scuticociliatosis (DaSc)-associated Philaster clade (DaScPc) caused catastrophic long-spined urchin mass mortality in spring and summer of 2022. The ciliate can be grown in culture in both the presence and absence of D. antillarum tissues, suggesting that it may persist outside its host by consuming microorganisms or dissolved organic nutrients. We hypothesized that DaScPc was present outside its host during and after mass mortality and absent prior to 2022. We examined DaScPc in DNA extracted from 500 swabs of sym- patric metazoa and abiotic surfaces, and plankton samples, collected at 35 sites in the Caribbean in 2022 and 2023. DaScPc was detected on corals, turf algae, and a sponge, predominantly at sites with active or prior DaSc. We examined whether it was present prior to 2022 by surveying extracted DNA from Caribbean corals and water collected near corals by PCR and by mining publicly available transcriptomes and metagenomes for DaScPc rRNAs. These efforts yielded no DaScPc genes. We further hypothesized that DaScPc may recruit to the specific corals detected in field surveys, and that these may then infect naïve hosts. A mesocosm experiment to test DaScPc recruitment suggested that, while it recruited to corals, it did so inconsistently between coral species. Incubation of corals that recruited DaScPc with naïve urchins yielded inconclusive results since urchins died without characteristic DaSc signs. Overall, our results suggest that DaScPc may occur outside its urchin host, and that it may have been absent in the region prior to 2022.

Florida

Ramah Member of the Crevasse Canyon Formation - A new stratigraphic unit in the Zuni Basin, west-central New Mexico

Nonmarine deposition accompanying and following a regression of the Cretaceous Interior Seaway during late Turonian time left a sedimentary sequence consisting of fluvial channel sandstones, thin overbank sandstones, and paludal shales containing thin coal beds. This unit is herein designated the Ramah Member of the Crevasse Canyon Formation. The Ramah Member is locally well exposed in the Zuni Basin of west-central New Mexico where it rests on the Gallup Sandstone (marine) and is overlain by the distinctive, feldspathic Torrivio Member of the Crevasse Canyon Formation (formerly of the Gallup Sandstone) Near Ramah, New Mexico the sequence overlies the F member of the Gallup but northward it overlies progressively younger members. These younger members are discrete sand-stone units associated with minor oscillations of relative sea level during a major regional-scale regression. North and east of Puerco Gap, near Gallup. New Mexico, the Ramah Member thins appreciably, and where unmappable it may be included with the Torrivio Member Southward from Gallup in the Zuni Basin. the Ramah locally approaches 150 ft in thickness and contains minable coal beds. The interval was previously referred to as the coal-bearing member of the Gallup (Mapel and Yesberger, 1985) or the Ramah unit (Anderson and Stricker, 1904). In the northern part of the Zuni Basin a problem may exist locally in determinig the top of the Ramah Member. This is due to the presence of fluviel sandstone with coarse-grained facies that looks much the s ame as the Torrivio Member, but underlines it Two criteria may be employed to distiguish the lower sandstone from the Torrivio and properly place it in the strartigraphic succession: (1) the lower sandstone is generally not as feldspathic as the Torrivio nor do the coarse-grained facies contain pebble-size material; and (2) the lower sandstone is not nearly as widespread as the overlying Torrivio. which has a blanket geometry. The type section of the Ramah Member is in the SE1/4 NW1/4 sec. 16 T10N R16W approximately 4 mi southwest of the town of Ramah. The principal coal lies near the top of the member and was mined during the 1920s to supply coal for the Zuni Pueblo schools.

New Mexico Geology

Integration of bed characteristics, geochemical tracers, current measurements, and numerical modeling for assessing the provenance of beach sand in the San Francisco Bay Coastal System

Over 150 million m 3 of sand-sized sediment has disappeared from the central region of the San Francisco Bay Coastal System during the last half century. This enormous loss may reflect numerous anthropogenic influences, such as watershed damming, bay-fill development, aggregate mining, and dredging. The reduction in Bay sediment also appears to be linked to a reduction in sediment supply and recent widespread erosion of adjacent beaches, wetlands, and submarine environments. A unique, multi-faceted provenance study was performed to definitively establish the primary sources, sinks, and transport pathways of beach-sized sand in the region, thereby identifying the activities and processes that directly limit supply to the outer coast. This integrative program is based on comprehensive surficial sediment sampling of the San Francisco Bay Coastal System, including the seabed, Bay floor, area beaches, adjacent rock units, and major drainages. Analyses of sample morphometrics and biological composition (e.g., Foraminifera) were then integrated with a suite of tracers including 87 Sr/ 86 Sr and 143 Nd/ 144 Nd isotopes, rare earth elements, semi-quantitative X-ray diffraction mineralogy, and heavy minerals, and with process-based numerical modeling, in situ current measurements, and bedform asymmetry to robustly determine the provenance of beach-sized sand in the region.

California

Aeromagnetic map and interpretation of geophysical data from the Condrey Mountain Roadless Area, Siskiyou County, California

The Condrey Mountain Roadless Area lies within the Klamath Mountains geologic province, a province composed of four eastward-dipping imbricate thrust slices or belts consisting predominantly of marine arc-related volcanic and sedimentary rocks, but also including significant amounts of ultramafic and other ophiolitic rocks (Irwin, 1981). From west to east the four Klamath Mountains thrust slices are called the western Jurassic belt, the western Paleozoic and Triassic belt, the central metamorphic belt, and the eastern Klamath belt. The Condrey Mountain Road less Area is located within a structural window in the western Paleozoic and Triassic belt, a window in which the structural dome comprised of the Condrey Mountain Schist is exposed (Coleman and others, 1983). North, east and south of the roadless area, the Condrey Mountain Schist is separated from the overlying western Paleozoic and Triassic belt by a low-angle regional thrust, whereas to the west the two units are in high-angle fault contact (Coleman and others, 1983). The Condrey Mountain schist consists mainly of sedimentary and volcanic rocks metamorphosed to greenschist facies. Metasedimentary rocks are exposed over most of the eastern and central parts of the structural window. Metavolcanic rocks occupy the western part of the window but also occur in small exposures within the metasedimentary rocks and along the eastern and southern margins of the window. Tabular bodies of metaserpentinite, the largest of which crops out near White Mountain, are contained within the metasedimentary rocks. Densities of hand samples from 11 sites scattered throughout the Condrey Mountain window average 2.66±0.05 g/cm 3 . The four samples of metavolcanic rocks yielded a higher average density than the seven samples of metasedimentary rocks (2.71±0.04 g/cm 3 versus 2.63±0.03 g/cm 3 ). Along the western edge of the Condrey Mountain Road less Area, numerous narrow north-trending zones of mineralized schist extend from near Copper Butte on the south, northward to Elliot Creek (Coleman and others, 1983). These zones contain abundant pyrite mineralization associated with pyrrhotite, chalcopyrite, qalena, and sphalerite. The Blue Ledge mine area, 2 mi north-northeast of Copper Butte, is located in a zone of mineralized schist. The western Paleozoic and Triassic belt that nearly surrounds the Condrey Mountain Schist is a melange of sedimentary, volcanic, and ultramafic rocks metamorphosed to amphibolite facies (Coleman and others, 1983). Only two samples of the metamorphic melange were collected near the Condrcy Mountain Road less Area, but extensive sampling of this unit southwest of the roadless area yielded an average sample density of 2.86±0.15 g/cm 3 (112 samples) (Jachens and others, 1983).

California

Vanadium

Vanadium is used primarily in the production of steel alloys; as a catalyst for the chemical industry; in the making of ceramics, glasses, and pigments; and in vanadium redox-flow batteries (VRBs) for large-scale storage of electricity. World vanadium resources in 2012 were estimated to be 63 million metric tons, which include about 14 million metric tons of reserves. The majority of the vanadium produced in 2012 was from China, Russia, and South Africa. Vanadium is extracted from several different types of mineral deposits and from fossil fuels. These deposits include vanadiferous titanomagnetite (VTM) deposits, sandstone-hosted vanadium (with or without uranium) deposits (SSV deposits), and vanadium-rich black shales. VTM deposits are the principal source of vanadium and consist of magmatic accumulations of ilmenite and magnetite containing 0.2 to 1 weight percent vanadium pentoxide (V 2 O 5 ). SSV deposits are another important source; these deposits have average ore grades that range from 0.1 to greater than 1 weight percent V 2 O 5 . The United States has been and is currently the main producer of vanadium from SSV deposits, particularly those on the Colorado Plateau. Vanadium-rich black shales occur in marine successions that were deposited in epeiric (inland) seas and on continental margins. Concentrations in these shales regularly exceed 0.18 weight percent V 2 O 5 and can be as high as 1.7 weight percent V 2 O 5 . Small amounts of vanadium have been produced from the Alum Shale in Sweden and from ferrophosphorus slag generated during the reduction of phosphate to elemental phosphorus in ore from shales of the Phosphoria Formation in Idaho and Wyoming. Because vanadium enrichment occurs in beds that are typically only a few meters thick, most of the vanadiferous black shales are not currently economic, although they may become an important resource in the future. Significant amounts of vanadium are recovered as byproducts of petroleum refining, and processing of coal, tar sands, and oil shales may be important future sources. Vanadium occurs in one of four oxidation states in nature: +2, +3, +4, and +5. The V 3+ ion has an octahedral radius that is almost identical to that of (Fe 3+ ) and (Al 3+ ) and, therefore, it substitutes in ferromagnesian minerals. During weathering, much of the vanadium may partition into newly formed clay minerals, and it either remains in the +3 valence state or oxidizes to the +4 valence state, both of which are relatively insoluble. If erosion is insignificant but chemical leaching is intense, the residual material may be enriched in vanadium, as are some bauxites and laterites. During the weathering of igneous, residual, or sedimentary rocks, some vanadium oxidizes to the +5 valence state, especially in the intensive oxidizing conditions that are characteristic of arid climates. The average contents of vanadium in the environment are as follows: soils [10 to 500 parts per million (ppm)]; streams and rivers [0.2 to 2.9 parts per billion (ppb)]; and coastal seawater (0.3 to 2.8 ppb). Concentrations of vanadium in soils (548 to 7,160 ppm) collected near vanadium mines in China, the Czech Republic, and South Africa are many times greater than natural concentrations in soils. Additionally, if deposits contain sulfide minerals such as chalcocite, pyrite, and sphalerite, high levels of acidity may be present if sulfide dissolution is not balanced by the presence of acid-neutralizing carbonate minerals. Some of the vanadium-bearing deposit types, particularly some SSV and black-shale deposits, contain appreciable amounts of carbonate minerals, which lowers the acid-generation potential. Vanadium is a micronutrient with a postulated requirement for humans of less than 10 micrograms per day, which can be met through dietary intake. Primary and secondary drinking water regulations for vanadium are not currently in place in the United States. Vanadium toxicity is thought to result from an intake of more than 10 to 20 milligrams per day. Vanadium is essential for some biological processes and organisms. For example, some nitrogen-fixing bacteria require vanadium for producing enzymes necessary to convert nitrogen from the atmosphere into ammonia, which is a more biologically accessible form of nitrogen.

Professional Paper

Chapter A: Summary and findings

The Agency for Toxic Substances and Disease Registry (ATSDR) is conducting epidemiological studies to evaluate the potential for health effects from exposures to volatile organic compounds (VOCs) in finished water supplied to family housing units at U.S. Marine Corps Base Camp Lejeune, North Carolina (USMCB Camp Lejeune). The core period of interest for the epidemiological studies is 1968– 1985. VOCs of major interest to the epidemiological studies include tetrachloroethylene (PCE), trichloroethylene (TCE), trans -1,2-dichloroethylene (1,2-tDCE), vinyl chloride (VC), and benzene. Eight water-distribution systems have supplied or currently (2013) are supplying finished water to family housing and other facilities at USMCB Camp Lejeune. The three distribution systems of interest to this study—Tarawa Terrace, Hadnot Point, and Holcomb Boulevard—have historically supplied finished water to the majority of family housing units at the Base. Historical exposure data needed for the epidemiological studies are limited or unavailable. To obtain estimates of historical exposure, water-modeling methods are used to quantify concentrations of particular contaminants in finished water and to compute the level and duration of human expo- sure to contaminated finished water. During 2007–2009, ATSDR published historical reconstruction results for contaminants delivered in finished water to Tarawa Terrace family housing areas and vicinity. Corresponding results for Hadnot Point and Holcomb Boulevard family housing areas and vicinity are presented here as a series of reports supporting ATSDR’s health studies at USMCB Camp Lejeune. These reports and associated supplements provide comprehensive descriptions of information, data analyses and interpretations, and modeling results used to reconstruct historical contaminant concentration levels in finished water delivered within the service areas of the Hadnot Point and Holcomb Boulevard water treatment plants (WTPs) and vicinities. This report, Chapter A: Summary and Findings, summarizes analyses and results of reconstructed VOC concentrations in groundwater, in water-supply wells, and in finished water delivered by the Hadnot Point WTP (HPWTP) and Holcomb Boulevard WTP (HBWTP) to family housing areas and vicinities. Methods and approaches to complete the historical reconstruction process for the Hadnot Point–Holcomb Boulevard study area included (1) information discovery and data mining, (2) three-dimensional, steady-state (predevelopment) and transient groundwater-flow modeling using MODFLOW-2005 and objective parameter estimation using PEST-12, (3) deter- mining historical water-supply well scheduling and operations using TechWellOp, (4) three-dimensional contaminant fate and transport modeling for VOCs dissolved in groundwater using MT3DMS-5.3, (5) estimating the volume of light nonaqueous phase liquid (LNAPL) released to the subsurface at the Hadnot Point Industrial Area using TechNAPLVol, (6) analysis of LNAPL and dissolved phase fate and transport using TechFlowMP, (7) reconstruction of water-supply well concentrations at the Hadnot Point landfill using the linear control theory model (LCM) TechControl, (8) computation of flow-weighted average concentrations of VOCs assigned to finished water delivered by the HPWTP using a materials mass balance (simple mixing) model, (9) extended period simulation of hydraulics and water quality of the Holcomb Boulevard water-distribution system using EPANET 2, (10) sensitivity analysis of hydraulic, fate and transport, and numerical-model parameter values, (11) uncertainty analysis by coupling Kalman filtering with Monte Carlo simulation within the LCM methodology, and (12) probabilistic analysis of intermittent connections (1972–1985) of the Hadnot Point and Holcomb Boulevard water-distribution systems using the TechMarkov-Chain model. The end result of the historical reconstruction process was the estimation of monthly mean concentrations of selected VOCs in finished water distributed to housing areas served by the HPWTP and HBWTP. Historical reconstruction results summarized herein provide considerable evidence that concentrations of several contaminants of interest in finished water delivered by the HPWTP substantially exceeded current maximum contaminant levels (MCLs) during all or much of the epidemiological study period of 1968–1985. Reconstructed concentrations of TCE exceeded the current MCL of 5 micrograms per liter (μg/L) prior to and during the entire epidemiological study period and reached a maximum reconstructed concentration of 783 μg/L during November 1983. The most likely date that TCE first exceeded its current MCL is during August 1953; however, this exceedance could have been as early as November 1948. Corresponding finished-water concentrations of PCE exceeded the current MCL of 5 μg/L during most of the period 1975–1985 and also reached a maximum concentration of 39 μg/L during November 1983. Similar results for 1,2-tDCE and VC were also noted during the period 1975–1985. The maximum reconstructed concentrations of 1,2-tDCE and VC were 435 and 67 μg/L, respectively, and also occurred during November 1983. The respective current MCLs for these contaminants are 100 and 2.0 μg/L. Substantial volumes of liquid hydrocarbon fuels were lost due to leakage to the subsurface within the Hadnot Point Industrial Area. This area contained as many as 10 active water-supply wells. Despite the large volumes lost, finished- water concentrations of benzene only slightly exceeded the current MCL of 5 μg/L during the period 1980–1985. The maximum reconstructed concentration of 12 μg/L of benzene occurred during April 1984. Within the HBWTP service area, only TCE routinely exceeded its current MCL during intermittent periods (1972–1985). The TCE resulted from transfers of finished water from the Hadnot Point water-distribution system to the Holcomb Boulevard water-distribution system. The maximum reconstructed TCE concentration of 51 μg/L occurred during June 1978 at the Berkeley Manor housing area. During the 8-day period of January 28 through February 4, 1985, the HBWTP was out of service, and the HPWTP continuously supplied finished water to the Holcomb Boulevard housing area. During this period, the maximum reconstructed TCE concentration at the HPWTP was 324 μg/L, which resulted in a maximum reconstructed monthly mean concentration of 66 μg/L within the Paradise Point housing area.

North Carolina

Constraints on the sedimentation history of San Francisco Bay from 14C and 10Be

Industrialization and urbanization around San Francisco Bay as well as mining and agriculture in the watersheds of the Sacramento and San Joaquin rivers have profoundly modified sedimentation patterns throughout the estuary. We provide some constraints on the onset of these erosional disturbances with 10Be data for three sediment cores: two from Richardson Bay, a small embayment near the mouth of San Francisco Bay, and one from San Pablo Bay, mid-way between the river delta and the mouth. Comparison of pre-disturbance sediment accumulation determined from three 14C-dated mollusk shells in one Richardson Bay core with more recent conditions determined from the distribution of 210Pb and 234Th [Fuller, C.C., van Geen, A., Baskaran, M, Anima, R.J., 1999. Sediment chronology in San Francisco Bay, California, defined by 210Pb, 234Th, 239,240Pu.] shows that the accumulation rate increased by an order of magnitude at this particular site. All three cores from San Francisco Bay show subsurface maxima in 10Be concentrations ranging in magnitude from 170 to 520 x 106 atoms/g. The transient nature of the increased 10Be input suggests that deforestation and agricultural develop- ment caused basin-wide erosion of surface soils enriched in 10Be. probably before the turn of the century.

California

Petroleum system and production characteristics of the Muddy (J) Sandstone (Lower Cretaceous) Wattenberg continuous gas field, Denver basin, Colorado

Wattenberg field is a continuous-type gas accumulation. Estimated ultimate recovery from current wells is 1.27 tcf of gas from the Lower Cretaceous Muddy (J) Sandstone. Mean gas resources that have the potential to be added to these reserves in the next 30 yr are 1.09 tcf; this will be primarily through infill drilling to recover a greater percentage of gas in place and to drain areas that are isolated because of geologic compartmentalization. Greatest gas production from the Muddy (J) Sandstone in Wattenberg field occurs (1) from within the most permeable and thickest intervals of Fort Collins Member delta-front and nearshore-marine sandstones, (2) to a lesser extent from the Horsetooth Member valley-fill channel sandstones, (3) in association with a large thermal anomaly that is delineated by measured temperatures in wells and by vitrinite reflectance contours of 0.9% and greater, (4) in proximity to the bounding Mowry, Graneros, and Skull Creek shales that are the hydrocarbon source rocks and reservoir seals, and (5) between the Lafayette and Longmont right-lateral wrench fault zones (WFZs) with secondary faults that act as conduits in areas of the field. The axis of greatest gas production is north 25 to 35 degrees northeast, which parallels the basin axis. Recurrent movement along five right-lateral WFZs that crosscut Wattenberg field shifted the Denver basin axis to the northeast and influenced depositional and erosional patterns of the reservoir and seal intervals. Levels of thermal maturity within the Wattenberg field are anomalously high compared to other areas of the Denver basin. The Wattenberg field thermal anomaly may be due to upward movement of fluids along faults associated with probable igneous intrusions. Areas of anomalous high heat flow within the field correlate with an increased and variable gas-oil ratio. Debra Higley has 5 years experience in uranium exploration and 20 years as a petroleum geologist with the U.S. Geological Survey. Her research interests include and integrate reservoir characterization, thermal maturation studies, and petroleum resource assessment in basins in North and South America. She received a B.S. degree in geology from Mesa State College (Colorado) and an M.S. degree in geochemistry and Ph.D. in geology from the Colorado School of Mines.Dave Cox is vice president of Reservoir Engineering for Questa Engineering in Golden, Colorado. He has 25 years experience in the oil and gas industry, primarily in reservoir engineering and property evaluations, and has analyzed reservoirs in 31 states of the United States and 19 other countries. He is an expert in coalbed methane, tight gas reservoirs, and enhanced oil recovery. He has B.S. and M.S. degrees in petroleum engineering from the Colorado School of Mines. Robert Weimer has taught courses in stratigraphy, regional and field geology, and energy resource exploration and development for 43 years. He earned B.A. and M.A. degrees from the University of Wyoming and his Ph.D. from Stanford University. He has been a visiting professor at universities in Calgary, Canada; Adelaide, Australia; and Bandung, Indonesia. He is currently professor emeritus, Colorado School of Mines. Weimer has been honored for teaching excellence, blending basic and applied research, national and international continuing education, and service to scientific societies and to state and national boards.

Colorado

Geology and geochemistry of jasperoids from the Gold Bar district, Nevada

Gold Bar is one of several Carlin-type gold mining districts located in the Battle Mountain-Eureka trend, Nevada. It is composed of one main deposit, Gold Bar; five satellite deposits; and four resources that contain 1.6 Moz (50 t) of gold. All of the deposits and resources occur at the intersection of north-northwest- and northeast-trending high-angle faults in slope facies limestones of the Devonian Nevada Group exposed in windows through Ordovician basin facies siliciclastic rocks of the Roberts Mountains allochthon. Igneous intrusions and magnetic anomalies are notably absent. The Gold Bar district contains a variety of discordant and stratabound jasperoid bodies, especially along the Wall Fault zone, that were mapped and studied in some detail to identify the attributes of those most closely associated with gold ore and to constrain genetic models. Four types of jasperoids, J0, J1, J2, and J3, were distinguished on the basis of their geologic and structural settings and appearance. Field relations suggest that J0 formed during an early event. Petrographic observations, geochemistry, and ??18O values of quartz suggest it was overprinted by the hydrothermal event that produced ore-related J1, J2, and J3 jasperoids and associated gold deposits. The greater amount of siliciclastic detritus present in J0 jasperoids caused them to have higher ??18O values than J1,2,3 jasperoids hosted in underlying limestones. Ore-related jasperoids are composed of main-ore-stage replacements and late-ore-stage open-space filling quartz with variable geochemistry and an enormous range of ??18O values (24.5 and -3.7???). Jasperoids hosted in limestones with the most anomalous Au, Ag, Hg, ??(As, Sb, Tl) concentrations and the highest ??18O values are associated with the largest deposits. The 28??? range of jasperoid ??18O values is best explained by mixing between an 18O-enriched fluid and an 18O-depleted fluid. The positive correlation between the sizes of gold deposits and the ??18O composition of jasperoids indicates that gold was introduced by the 18O-enriched fluid. The lowest calculated ??18O value for water in equilibrium with late-ore-stage quartz at 200??C (-15???) and the measured ??D value of fluid inclusion water extracted from late-ore-stage orpiment and realgar (-116???) indicate that the 18O-depleted fluid was composed of relatively unexchanged meteoric water. The source of the 18O-enriched ore fluid is not constrained. The ??34S values of late-ore-stage realgar, orpiment, and stibnite (5.7-15.5???) and barite (31.5-40.9???) suggest that H2S and sulfate were derived from sedimentary sources. Likewise, the ??13C and ??18O values of late-stage calcite (-4.8 to 1.5??? and 11.5 to 17.4???, respectively) suggest that CO2 was derived from marine limestones. Based on these data and the apparent absence of any Eocene intrusions in the district, Gold Bar may be the product of a nonmagmatic hydrothermal system. ?? Springer-Verlag 2006.

Mineralium Deposita

Good practices for species distribution modeling of deep-sea corals and sponges for resource management: Data collection, analysis, validation, and communication

Resource managers in the United States and worldwide are tasked with identifying and mitigating trade-offs between human activities in the deep sea (e.g., fishing, energy development, and mining) and their impacts on habitat-forming invertebrates, including deep-sea corals and sponges (DSCS). Related management decisions require information about where DSCS occur and in what densities. Species distribution modeling (SDM) provides a cost-effective means of identifying potential DSCS habitat over large areas to inform these management decisions and data collection. Here we describe good practices for DSCS SDM, especially in the context of data collection and management applications. Managers typically need information regarding DSCS encounter probabilities, densities, and sizes, defined at sub-regional to basin-wide scales and validated using subsequent, targeted data collections. To realistically achieve these goals, we suggest analysts: 1) integrate available data sources in SDMs including fine-scale visual sampling and broad-scale resource surveys (e.g., fisheries trawl surveys); and 2) include environmental predictor variables representing multiple spatial scales, model residual spatial autocorrelation, and quantify prediction uncertainty. When possible, models fitted to presence-absence and density data are preferred over models fitted only to presence data, which are difficult to validate and can confound estimated probability of occurrence or density with sampling effort. Ensembles of models can provide robust predictions, while multi-species models leverage information across taxa and facilitate community inference. To facilitate the use of models by managers, predictions should be expressed in units that are widely understood and validated at an appropriate spatial scale using a sampling design that provides strong statistical inference. We present three case studies for the Pacific Ocean that illustrate good practices with respect to data collection, modeling, and validation; these case studies demonstrate it is possible to implement our good practices in real-world settings.

Frontiers in Marine Science

Hydrothermal vents and methane seeps: Rethinking the sphere of influence

Although initially viewed as oases within a barren deep ocean, hydrothermal vent and methane seep communities are now recognized to interact with surrounding ecosystems on the sea floor and in the water column, and to affect global geochemical cycles. The importance of understanding these interactions is growing as the potential rises for disturbance from oil and gas extraction, seabed mining and bottom trawling. Here we synthesize current knowledge of the nature, extent and time and space scales of vent and seep interactions with background systems. We document an expanded footprint beyond the site of local venting or seepage with respect to elemental cycling and energy flux, habitat use, trophic interactions, and connectivity. Heat and energy are released, global biogeochemical and elemental cycles are modified, and particulates are transported widely in plumes. Hard and biotic substrates produced at vents and seeps are used by “benthic background” fauna for attachment substrata, shelter, and access to food via grazing or through position in the current, while particulates and fluid fluxes modify planktonic microbial communities. Chemosynthetic production provides nutrition to a host of benthic and planktonic heterotrophic background species through multiple horizontal and vertical transfer pathways assisted by flow, gamete release, animal movements, and succession, but these pathways remain poorly known. Shared species, genera and families indicate that ecological and evolutionary connectivity exists among vents, seeps, organic falls and background communities in the deep sea; the genetic linkages with inactive vents and seeps and background assemblages however, are practically unstudied. The waning of venting or seepage activity generates major transitions in space and time that create links to surrounding ecosystems, often with identifiable ecotones or successional stages. The nature of all these interactions is dependent on water depth, as well as regional oceanography and biodiversity. Many ecosystem services are associated with the interactions and transitions between chemosynthetic and background ecosystems, for example carbon cycling and sequestration, fisheries production, and a host of non-market and cultural services. The quantification of the sphere of influence of vents and seeps could be beneficial to better management of deep-sea environments in the face of growing industrialization.

Frontiers in Marine Science

Geology of the southern Elkhorn Mountains, Jefferson and Broadwater Counties, Montana

The geology of an area of about 270 square miles in the southern Elkhorn Mountains, west of Townsend in west-central Montana, is described. The mountains in the southern part of the area comprise northward-trending alternating ridges and valleys underlain principally by folded sedimentary rocks. They merge northward into the higher and more rugged main mass of the mountains, which is underlain principally by upper Cretaceous volcanic rocks. The mountaintops are 1,000 to 4,500 feet above the major valleys. The sedimentary rocks range in age from Precambrian to Tertiary and the igneous rocks from late Cretaceous to probably middle Tertiary. The oldest rocks are varicolored mudstone, shale, and sandstone of the Belt series of late Precambrian age. They are overlain with slight unconformity by a moderately thick but incomplete section of Paleozoic rocks. The basal Paleozoic formation is the Flathead quartzite of Middle Cambrian age, which is overlain by alternating units of shale and carbonate rock : the Wolsey shale, the Meagher limestone, the Park shale, the Pilgrim dolomite, and the Red Lion formation, all of Cambrian age. A slight erosional unconformity between the Red Lion formation and the Maywood formation of late Devonian age marks a long interval of crustal stability in the area. The Maywood is overlain by the Jefferson dolomite and the Three Forks shale of Late Devonian and Mississippian age, and these in turn are conformably overlain by the Lodgepole and Mission Canyon limestones, a thick carbonate sequence of Mississippian age. A slight erosional unconformity separates the Mission Canyon limestone from the Amsden formation, which probably includes beds of both Mississippian and Pennsylvanian age. The Amsden is composed of a heterogeneous assemblage of arenaceous, argillaceous, dolomitic, and calcareous rocks and grades upward into the Quadrant formation of Pennsylvanian age, an alternation of quartzitic sandstone and dolomite. At the top of the Paleozoic section is the Phosphoria formation of Permian age, a thin unit of chert and quartzitic sandstone that contains a few thin phosphate beds. The basal Mesozoic unit is the Swift formation of late Jurassic age, a thin calcareous marine sandstone that overlies the Phosphoria with slight erosional unconformity. It is overlain by nonmarine shale and sandstone of the Morrison formation of late Jurassic age and the Kootenai formation of Early Cretaceous age. The Kootenai is overlain, possibly with slight erosional unconformity, by the Colorado formation an assemblage of marine dark shale and siliceous mudstone and nonmarine quartz-chert sandstone. The Colorado formation as here used includes beds of both Early and Late Cretaceous age. The Colorado in places grades upwards into a sequence of feldspathic sandstone and tuff beds here named the Slim Sam formation. Elsewhere within the area, the Slim Sam formation is absent, probably in part owing to erosion and in part nondeposition. Where present, the Slim Sam grades upward into a thick sequence of andesitic and quartz latitic volcanic rocks, comprising tuffs, lapilli tuffs, breccias, welded tuffs and flows, that are here named the Elkhorn Mountains volclinics and are probably entirely of Cretaceous age. Where the Slim Sam formation is absent, the Elkhorn Mountains volcanics rest with angular unconformity on beds as old as the Morrison. The pre-Tertiary layered rocks, aggregating more than 15,000 feet in thickness, were folded and intruded by igneous rocks of several types, and the area was uplifted and eroded to a terrain of mature relief, similar to that of the present. During the Oligocene epoch, volcanic sediments with interbreds of nonvolcanic gravel accumulated. These beds were in turn moderately eroded, and gravel of Miocene ( ?) age was deposited in channels within them. Subsequently, probably during the Pliocene epoch, the Tertiary beds were weakly deformed locally, and a pediment was cut across the Tertiary and older rocks in the southern part of the area. Fan gravel, in part of Recent origin and in part older, blankets parts of the pediment. Glacial deposits of at least two stages of Pleistocene glaciation are present in the higher mountains in the northern part of the area. The intrusive igneous rocks, except for a few felsite dikes of uncertain age, are divisible into two groups, primarily on the basis of structural relations and secondarily on the basis of composition and fabric. The older group of dioritic and andesitic rocks were intruded in part, if not wholly, prior to the main folding and are similar in chemical and mineralogical composition to the Elkhorn Mountains volcanics. They were probably emplaced throughout the period of volcanism that commenced in late Niobrara time and continued until late Cretaceous time. The younger group consists chiefly of quartzbearing phanerites but includes rocks ranging from gabbro to alaskitic granite and aplite. These rocks were emplaced after the main episode of folding and faulting. The Boulder batholith, composed dominantly of quartz monzonite, is the principal body of this younger group. The older igneous rocks metamorphosed the invaded rocks only slightly. In contrast, the younger intrusive bodies, and especially the batholith, altered and recrystallized the country rock in moderately broad belts, changing them to various types of hornfels, calcsilicate rock, marble, and vitreous quartzite. Concomitantly magnetite, garnet, axinite, and other high-temperature replacement minerals formed locally as products of additive metamorphism. The pre-Tertiary layered rocks of the southern Elkhorn Mountains are folded into northward-trending folds and are cut by many faults. The sedimentary rocks tend to be more tightly folded than the Elkhorn Mountains volcanics, although both were involved in the major folding. The principal folds of the area from east to west are : a major dome, a complex syncline with several second-order folds, and a remnant of a northward-plunging anticline, the major part of which was engulfed by the batholith. The folded rocks are cut by many faults of small to moderate displacement and by two faults of large displacement. Most of the faults were probably formed by the same forces that produced the folds. The origin of the two major faults, however, is uncertain, and may be related to igneous activity. The batholith crosscuts the folded structure and is in turn cut by small faults. Some parts of the area were elevated along steep normal faults in late Tertiary time. The southern part of the Elkhorn Mountains has been mountainous at least since early Oligocene time, and probably began to take form during the Cretaceous. As a consequence of long continued erosion, the modern topography reflects the structure and lithologic character of the underlying rocks except in a few areas blanketed by poorly consolidated Tertiary rocks and in the higher mountains where glaciation has been prominent. Silver, lead, zinc, and gold have been produced, either singly or, more typically, as a combination of metals from a number of types of ore deposits. Replacement deposits in carbonate rocks are the most common type, but veins, contact metamorphic deposits, and pipelike bodies of breccia cemented by ore and gangue minerals also are present. The Elkhorn mining district has the largest number of mines and the greatest variety of types of deposits. In the Tizer Basin several narrow goldbearing veins cut andesitic volcanic rocks, and in the southern part of the area sporadic small veins and replacement deposits occur in carbonate rocks. The mines and prospects of the area are described, and some suggestions for future prospecting are outlined. The application of geochemical prospecting techniques may prove of value, judging from the results of reconnaissance soil sampling in the vicinity of the Elkhorn mine.

Montana

Analysis and review of fishery-dependent data for Hawaiian nearshore noncommercial fisheries

Noncommercial, shore-based fisheries provide economic, social, and cultural services to communities throughout the Hawaiian Islands. The State of Hawai‘i Department of Land and Natural Resources (DLNR), Division of Aquatic Resources (DAR) routinely conducts surveys to monitor noncommercial fisheries such that estimates of fishing effort and catch by gear type can be generated and used to implement more sustainable management practices. DAR executes both the Hawai‘i Marine Recreational Fishery Survey (HMRFS), a nationally standardized survey that focuses on intercepting fishers at access points (i.e., boat ramps) across the main Hawaiian Islands, and a set of roving creel surveys on O‘ahu, Maui Nui, and Kaua‘i that observe and intercept fishers at locations along the shoreline outside of those targeted by HMRFS. The latter set of creel surveys were designed to complement HMRFS by expanding its geographic coverage and thus providing a more representative picture of noncommercial fishing in Hawai‘i. Sustainable management priorities set by DAR rely on the availability of statewide, fishery- dependent data. Thus, we collate information from island-based roving creel surveys into a cohesive Statewide Creel Survey Database. Further, we provide preliminary analyses and describe ways that surveys could be streamlined to improve future data collection, analysis, and utility. In so doing, we synthesize the most detailed information to-date about noncommercial shore-based fisheries of Hawai‘i. The unprecedented spatial and temporal coverage of DAR’s dataset reveals the value of their survey efforts over the last decade to address fishery management needs. Our primary objectives, results, and conclusions are summarized below: 1) Integrate DAR roving creel survey data from different islands into a single Statewide Creel Survey Dataset (Chapter II). We describe the collation of creel survey data from O‘ahu, Maui Nui, and Kaua‘i into a statewide dataset. We also offer ways in which these surveys could be streamlined to meet the needs of managers and decision makers. Briefly, these are to create a statewide strategic plan, standardize the execution of standard operating procedures, centralize the creel survey database and associated metadata, and consider using technology that improves the data pipeline, including transitioning from paper-based to electronic systems for data entry and processing. 2) Assess whether the new Statewide Creel Survey Dataset can provide inputs for length-based stock assessments (Chapter III). Only on Maui were interviews conducted with associated catch data. There was reasonably high taxonomic coverage (42 species from 186 interviews with 310 fishers), but low sample sizes for nearly all species precluded the development of length-based stock assessments. We provide summary statistics from the existing data and briefly discuss how technologies could be used to automate analysis of images of noncommercial catch. 3) Analyze the Statewide Creel Survey Dataset for spatial and temporal patterns in fishing effort (Chapter IV): a. Visualizing noncommercial fishing pressure . We found that fishing effort (mean number of fishers observed per survey event at a site) on O'ahu was over three times greater than that recorded during similar surveys conducted on Maui or Kaua'i. We create maps that display the distribution of angling and spearfishing effort around each of the three islands. b. Factors that predict fishing “hotspots” around Maui . Fishing effort on Maui was associated with areas with more wave power and less parking availability. There were half as many fishers in areas with parking lots than in areas with parking on the road shoulder only. c. Changes in fishing effort during the COVID-19 pandemic . There was no change in fishing effort on O‘ahu during the first year of the pandemic, but there was a 20% decline in year 2 and a 33% decline in year 3, both in comparison to pre-pandemic levels. Pre-pandemic creel survey data were unavailable for Maui and Kaua‘i, but fishing effort on these islands also declined as the pandemic progressed at similar or greater rates than those observed on O‘ahu. 4) Quantify potential bias in survey methods by experimentally deriving fisher detection probabilities of shore-based and drone-based surveys (Chapter V): a. Shore-based surveys . We conducted roving creel surveys for four months at three locations around Hilo Bay, designed to emulate and estimate the efficacy of DAR standard operating procedures. There was high agreement between paired observers in counting fishers, leading to near-perfect detection probabilities of both anglers (94%) and spearfishers (97%), but relatively low agreement and detection probabilities of other fishers (throw net, ‘opihi picking, etc.) (52%). b. Drone-based surveys . We used an unmanned aerial vehicle (UAV; operated by DAR staff) to collect imagery of fishers along the Hilo Bay shoreline. We used still images and video clips (with known fishing activity) to build an online survey that was distributed to DAR and HCFRU personnel, asking them to count and categorize resource users as a snorkeler, spearfisher, angler, or other fisher. Only 40.0% of the responses correctly counted and categorized resource users in the image. Anglers were correctly identified and enumerated in 90.0% of the responses, but the correct response rates of the other three user categories ranged from 67.8% – 79.4%. Snorkelers and anglers tended to be undercounted while spearfishers and other fishers were overcounted. 5) Review the potential for incorporating emerging technologies that will improve, augment, and evolve creel survey data collection, especially for spearfishing (Chapter VI). Within the context of monitoring shore-based noncommercial fishing, we review the use of electronic data entry/processing systems with geospatial and image capabilities, field cameras, drones, smart buoys, citizen science apps, data mining social media, artificial intelligence and machine learning. We highlight several of the challenges and considerations when implementing these technologies into creel surveys and provide a synthesis of options that could be used to better estimate spearfishing. The general conclusion of this assessment is that the DAR roving creel survey program is collecting valuable data that supplement the existing HMRFS efforts. However, there are a number of areas that could be improved to make these efforts a more effective tool for decision-making processes in resource management and conservation: 1) Establishment of clear statewide and island objectives for the Statewide Creel Survey Dataset. Currently, data collection efforts are focused towards addressing a very broad purpose – supplementing the HMRFS data collection efforts. However, the results of the preliminary analyses conducted as part of this project suggest that the data could be used to address other areas of need if these objectives were clearly defined. Further, the design of the creel survey would benefit from greater standardization of survey protocols between islands and an effort to define a) the acceptable margins of error associated with the estimates generated by these data and b) the minimum level of change that the surveys would need to detect to be useful to managers. 2) Centralization of data entry, data quality assessment, and data accessibility. Currently, each DAR office manages data entry, checks the data for errors, and is responsible for managing and storing the data. Instituting a centralized data entry system, particularly an online database that can receive survey data from tablets or smartphones running a standardized data collection application would improve efficiency, reduce data entry errors, and accelerate the availability of data to managers. A substantial amount of time and effort from the project described in this report was devoted to checking the dataset for errors. The development and application of data quality assurance protocols would ensure that the data are reliable and available in a timely fashion to support management decisions. 3) Address lingering questions regarding the efficacy of current survey protocols to capture and characterize the spearfishing component of the noncommercial fishery. The results presented in the report suggest that the current creel survey protocols do a good job detecting spearfishers when present but are not capturing sufficient data about their catch or total effort. There are also questions remaining as to whether the survey times and sites are sufficiently capturing the behavior of spearfishers in Hawai‘i. A more thorough assessment – whether through additional research, alteration of survey design, or review of data by representatives of the spearfishing community – would provide insight on how to use the Statewide Creel Survey Database to inform management of spearfishing. 4) Investigate the integration of technological advancements into the creel survey methods. As priorities and needs are developed and formalized, it would be valuable to consider how various technological advancements might enhance and streamline data collection or open new avenues of inquiry.

Hawaii