Geology Reports⌕ Search

SEARCH · Geology Reports

Results for “Geophysics, Geochemistry, Geosystems”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

220 records · Page 7Linked to original sources
USGS1999

The effects of the Chesapeake Bay impact crater on the geological framework and correlation of hydrogeologic units of the lower York-James Peninsula, Virginia

This report documents the highly variable structure, stratigraphy, and buried topography of the outer rim of the Chesapeake Bay impact crater created by its impact and burial. Lithologies of cores are correlated with borehole geophysical logs to characterize the physical properties of the stratigraphic units and their geophysical signatures. The correlation between cores, well cuttings, and borehole geophysical logs is augmented with seismic-reflection data, and these data are compiled into a lithostratigraphic cross section that illustrates the geological framework of the lower York-James Peninsula and immediate surrounding areas.

Virginia↗
USGS2025

Evidence for fluid pressurization of fault zones and persistent sensitivity to injection rate beneath the Raton Basin

Subsurface wastewater injection has increased the seismicity rate within the Raton Basin over more than two decades, with the basin-wide injection rate peaked between 2009-2015. To understand the evolution of injection-induced earthquakes, we systematically analyzed 2016-2024 broadband recordings with a machine-learning-based phase picker and constructed a catalog with 95,993 earthquakes (-1≤ M L ≤4.3). We then inverted for full centroid moment tensors (CMT) for 90 M L ≥ 2 events, with a special interest in constraining the non-double-couple components via probabilistic metrics. Both relocations and CMT solutions support basement-rooted normal faults, including graben and half-graben structures. Furthermore, we observe the non-double-couple components that imply elevated pore pressure in the fault zones. An earthquake cluster emerged in the north-central basin in 2023, preceded by ~1-yr of increased injection volume from wells within 15km. Despite a basin-wide decrease in the injection volume, we highlights the persistence of seismicity that remains to sensitive to injection rates within the Raton Basin.

Colorado, New Mexico↗
USGS2024

Shallow lake, strong shake: Record of seismically triggered lacustrine sedimentation from the 1959 M7.3 Hebgen Lake earthquake within Henrys Lake, Idaho

We investigate a shallow lake basin for evidence of a large historic intraplate earthquake in western North America. Henrys Lake, Idaho is an atypical candidate for a lacustrine paleoseismic study given its shallow depth (~7 m) and low relief (≤2° slopes ). Here, we test the earthquake-recording capacity of this basin type by showing sedimentological evidence of the 1959 M7.3 Hebgen Lake earthquake within sediment cores, using anthropogenically produced 137 Cs activity to constrain timing. In addition to expanding the morphologic range of basins targeted for lacustrine paleoseismic studies, this work has implications for sediment response in dam-enhanced basins. Lack of sedimentological evidence for other earthquakes coupled with radiocarbon chronology reveals that the 1959 event is the only clearly recorded earthquake within Henrys Lake since the mid-Holocene. Henrys Lake offers a proxy for paleo-earthquake signatures within similar lacustrine environments and underscores the importance of further paleoseismic studies in the region.

Idaho↗
USGS2025

Divide and conquer: Separating the two probabilities in seismic phase picking

There are two fundamental probabilities in the seismic phase picking process – the probability of the existence of a seismic phase (detection probability) and the probability of correctly identifying the phase arrival time (timing probability). The nearly ubiquitous approach in developing deep learning phase picking models is to use a kernel, such as a truncated Gaussian, to mask the labeled phase arrival time, and train a segmentation model. Once a model is trained, the times of the peaks in the output are taken as phase arrival times (picks) and the height of the peaks are taken as “probability” of the picks. Here, we show that this “probability” represents neither the detection nor the timing probabilty because this approach forces the output to follow the shape of the kernel. We introduce an approach using two models to estimate these two distinct probabilities. We use a binary classifier with a calibrated confidence to address the detection probability and a multi-class classifier to obtain a probability mass function to address the timing probability. This new approach makes the deep learning-based phase picking process more interpretable and gives us options to logically control seismic monitoring workflows.

Geophysical Journal International↗
USGS2026

Detecting snow avalanche activity using infrasound: Hooker Valley, New Zealand

Snow avalanches pose considerable hazards to people and infrastructure in alpine environments. Traditional avalanche monitoring relies on meteorological data and visual observations, which can be limited in scope and timeliness. Infrasound offers a promising complementary monitoring tool by detecting the low-frequency sound waves generated by avalanches. Here, we present infrasound and camera observations during a 50-day field campaign in the Hooker Valley of Aoraki/Mount Cook National Park, New Zealand. Our study detected seven avalanches with the cameras, whereas the infrasound system identified only one of these events, which was the largest and occurred under conditions that likely favoured infrasound propagation. The infrasound system recorded numerous other events not captured by the cameras, indicating the benefit of further investigation to determine their sources. These findings highlight the potential of infrasound technology for detecting avalanches and providing broad spatial coverage, capturing events in areas not monitored by cameras, while also showcasing limitations in infrasound capabilities. The limited detection of smaller avalanches underscores the opportunity for further research to enhance detection capabilities and understand environmental influences such as snow cover and wind noise. Overall, this study emphasises the utility of multidisciplinary monitoring techniques to improve avalanche detection in alpine environments.

Hooker Valley↗
USGS2024

Earthquake cycle mechanics during caldera collapse: Simulating the 2018 Kīlauea eruption

In multiple observed caldera-forming eruptions, the rock overlying a draining magma reservoir dropped downward along ring faults in sequences of discrete collapse earthquakes. These sequences are analogous to tectonic earthquake cycles and provide opportunities to examine fault mechanics and collapse eruption dynamics over multiple events. Collapse earthquake cycles have been studied with zero-dimensional slider-block models, but these do not account for the complicated interplay between fluid and elastic dynamics or for factors such as the heterogeneous fault properties and non-vertical ring fault geometries often inferred at volcanoes. We present two-dimensional axisymmetric mafic piston-like collapse earthquake cycle models that include rate-and-state friction, fully-dynamic elasticity, and compressible viscous fluid magma flow. We demonstrate that collapse earthquake intervals and magnitudes are highly sensitive to inertial effects, evolving stress fields, fault geometry, and depth-varying fault friction. Given the consistent earthquake cycles observed in most eruptions, this suggests that ring faults can quickly stabilize and often become nearly vertical at depth. We use the well-monitored 2018 collapse sequence at Kı̄lauea as a case study. Our model can produce many features of Kı̄lauea seismic and geodetic observations, except for a significant amount of interseismic slip, which cannot be readily explained with simple rate-and-state friction parameterizations.

Hawaii↗
USGS2025

3D viscoelastic models of slip-deficit rate along the Cascadia subduction zone

Interseismic deformation in the Pacific Northwest is constrained by the horizontal crustal velocity field derived from the Global Positioning System (GPS) in addition to vertical rates derived from GPS, leveling, and tide gauge measurements. Such measurements were folded in to deformation models of fault slip rates as part of the 2023 National Seismic Hazard Model (NSHM) update. Here I build upon one of the contributing models, the viscoelastic earthquake-cycle model of Pollitz [2022]. This model permits inclusion of effects of time-dependent viscoelastic relaxation within earthquake cycles (i.e., ‘ghost transients’) and laterally variable elastic and/or ductile material properties. I lever-age these capabilities to incorporate the Cascadia megathrust into Western U.S.-wide deformation models in which crustal fault slip rates are estimated simultaneously with slip deficit rates along the interplate boundary between the descending Juan de Fuca plate and North American plate. This effort includes construction of a margin-wide model of viscoelastic structure founded on the Slab 2.0 model and probes different models of the ductile properties of the surrounding oceanic asthenosphere, continental lower crust, and mantle asthenosphere. This results in new estimates of the distribution of slip deficit rate along the ∼ 1000 km long margin, highlights the importance of correcting for glacial-isostatic adjustment effects, and permits assessment of sensitivity of results to assumed ductile properties.

California, Oregon, Washington↗
USGS2024

Exploring the dynamic interactions between the Southern San Andreas Fault and a normal fault under the Salton Sea

We investigate the dynamic interactions between the Southern San Andreas Fault (SSAF) and a proximal normal fault (NF) beneath the Salton Sea in southern California. The NF, positioned near the SSAF terminus at Bombay Beach, exhibits 11–15 displacement events across 14 stratigraphic sequences, with a range of 0.2–1.4 m of vertical offset since ∼2–3 ka. Notably, four of these events may align temporally with SSAF earthquakes, raising questions about the possible interplay between the two faults. Utilizing dynamic rupture models, we analyze the coseismic interactions between the SSAF and NF, addressing under what conditions the SSAF induces slip on the NF. Our findings reveal that a suite of SSAF ruptures, particularly those propagating from north to south, can trigger slip on the normal fault and replicate observed vertical offsets. If the SSAF extends beneath the Salton Sea, earthquakes originating south of the NF intersection are less likely to trigger normal fault slip, although we cannot exclude this possibility. Some SSAF ruptures do not trigger discernible slip on the NF, rendering such events undetectable in the stratigraphic record. Our research contributes toward discussions regarding the seismic hazard in southern California, shedding light on the interplay between the SSAF and NF.

California↗
USGS2024

Afterslip and creep in the rate-dependent framework: Joint inversion of borehole strain and GNSS displacements for the Mw 7.1 Ridgecrest earthquake

The elusive transition toward afterslip following an earthquake is challenging to capture with typical data resolution limits. A dense geodetic network recorded the Mw 7.1 Ridgecrest earthquake, including 16 Global Navigation Satellite System (GNSS) stations and 3 borehole strainmeters (BSM). The sub-nanostrain precision and sub-second sampling rate of BSMs bridges a gap between conventional seismologic and geodetic methods, exemplified by atypical postseismic shear strain reversals observed at nearfield (<2 km) station B921 that remain unexplained. We jointly invert GNSS displacements and BSM strains for coseismic and postseismic slip spanning hours to months over 7 independent periods. Cosiesmically, our model resolves the largest slip magnitudes of up to 6.6 m on the mainshock rupture plane, with similar patterns to other inferred slip distributions. The foreshock fault appears to slip coincidently with mainshock, revealing potential asperities activated during the preceding Mw 6.4 event. Postseismically, the best-fitting models adhere to mechanical rate-and-state expectations of logarithmically decaying slip adjacent to the coseismic rupture terminus, and where deep rheologic conditions favor creep. Most spatial variation occurs in the early postseismic timeframe (<1–2 weeks), with evidence for regional rheologic control and static stress dependence. Triggered creep on the neighboring Garlock Fault unexpectedly persists for >178 days—further highlighting the importance of fault networks in postseismic stress redistribution, critical to assessing future hazard.

Journal of Geophysics Research↗
USGS2026

Open-source gravity reduction workflows for geothermal resource assessment

Potential-field geophysical data such as gravity can enhance understanding of geothermal resources at all stages of the resource life cycle, including assessment, exploration, development, and monitoring, and at multiple scales, from the reservoir scale to regional scale. However, to make gravity data useful for geothermal resource characterization, several processing steps are required to isolate the effects of density variations in the Earth’s crust to enable the identification of structural features associated with geothermal resources. Although this process is well-established, standard computational implementations for processing gravity data that are FAIR (Findable, Accessible, Interoperable, and Reproduceable) are still lacking. This paper details ongoing efforts at the U.S. Geological Survey (USGS) to develop a standard set of open-source Python tools for gravity data reduction that align with the FAIR principles. This workflow makes use of existing open-source tools for geophysical data processing with the goal of maximizing opportunities for rapid improvements, interoperability, and adaptability to other types of geophysical data.

Conference Paper↗
USGS2026

The United States Magnetotelluric Array and the National Impedance Map

The United States Magnetotelluric Array (USMTArray) data set, collected in the years 2006–2024, consists of more than 1,700 long-period magnetotelluric stations covering the entirety of the contiguous United States on a quasi-regular 70 km grid. Funding across multiple federal agencies was critical to sustaining this effort to its completion. Important components of the project included active guidance and participation from the MT community, the open and timely availability of all data, and the application of consistent instrumentation and robust data processing. Together with parallel advancement in the development of publicly available three-dimensional (3D) inversion codes, the USMTArray has revitalized the US magnetotelluric community and increased the visibility of magnetotellurics within the Earth-science community. Taken as a whole, these data are visualized as the National Impedance Map, which, together with a 3D synthesis conductivity model of the nation, reveals the electrical architecture of the contiguous US. USMTArray data are used by researchers worldwide for fundamental and applied studies, including investigations of continental architecture and evolution, estimation of hazards to critical infrastructure due to geomagnetic storms, and assessment of the nation's undiscovered geothermal and mineral resources. We here review the history and development of the project, discuss the challenges and successes in its execution, present the National Impedance Map and synthesis conductivity model, and highlight the breadth of research stemming from this rich data set.

conterminous United States↗
USGS2024

Limited preservation of strike-slip surface displacement in the geomorphic record

Offset geomorphic markers are commonly used to interpret slip history of strike-slip faults and have played an important role in forming earthquake recurrence models. These data sets are typically analyzed using cumulative probability methods to interpret average amounts of slip in past earthquakes. However, interpretation of the geomorphic record to infer surface slip history is complicated by slip variability, measurement uncertainty, and modification of offset features in the landscape. To investigate how well geomorphic data record surface slip, we use offset measurements from recent strike-slip surface ruptures ( n = 39), faults with geomorphic evidence of multiple strike-slip earthquakes ( n = 29), and synthetic slip distributions with added noise ( n > 10,000) to examine the constraints of the geomorphic record and the underlying assumptions of the cumulative offset probability distribution analysis method. We find that the geomorphic record is unlikely to resolve more than two paleo-slip distributions, except in specific cases with low slip variability, high slip-per-event, and semiarid climate. In cases where site-specific conditions allow for interpretation of more than two earthquakes, lateral extrapolation along a fault is not straightforward because on-fault displacement and distributed deformation may be spatially variable in each earthquake. We also find that average slip in modern earthquakes is adequately recovered by probability methods, but the reported prevalence of strike-slip faults with characteristic slip history is not supported by geomorphic data. We also propose updated methods to interpret slip history and construct uncertainty bounds for paleo-slip distributions.

Journal of Geophysical Research: Solid Earth↗
USGS2024

RegionGrow3D: A deterministic analysis for characterizing discrete three-dimensional landslide source areas on a regional scale

Regional-scale characterization of shallow landslide hazards is important for reducing their destructive impact on society. These hazards are commonly characterized by (a) their location and likelihood using susceptibility maps, (b) landslide size and frequency using geomorphic scaling laws, and (c) the magnitude of disturbance required to cause landslides using initiation thresholds. Typically, this is accomplished through the use of inventories documenting the locations and triggering conditions of previous landslides. In the absence of comprehensive landslide inventories, physics-based slope stability models can be used to estimate landslide initiation potential and provide plausible distributions of landslide characteristics for a range of environmental and forcing conditions. However, these models are sometimes limited in their ability to capture key mechanisms tied to discrete three-dimensional (3D) landslide mechanics while possessing the computational efficiency required for broad-scale application. In this study, the RegionGrow3D (RG3D) model is developed to broadly simulate the area, volume, and location of landslides on a regional scale (≥1,000 km 2 ) using 3D, limit-equilibrium (LE)-based slope stability modeling. Furthermore, RG3D is incorporated into a susceptibility framework that quantifies landsliding uncertainty using a distribution of soil shear strengths and their associated probabilities, back-calculated from inventoried landslides using 3D LE-based landslide forensics. This framework is used to evaluate the influence of uncertainty tied to shear strength, rainfall scenarios, and antecedent soil moisture on potential landsliding and rainfall thresholds over a large region of the Oregon Coast Range, USA.

Journal of Geophysical Research: Earth Surface↗
USGS2026

Corundum discovered by SuperCam and the Perseverance rover at Jezero crater, Mars

Mars is primarily composed of mafic mineral assemblages and their alteration products, but small, scattered rocks strewn across the landscape offer clues to greater petrological diversity. While traversing the Jezero crater rim, the Perseverance rover encountered several plagioclase-rich light-toned float rocks. SuperCam identified the distinctive signature of corundum (α-Al 2 O 3 ) in these rocks using time-resolved luminescence spectroscopy. Two strong peaks (692.7 and 694.1 nm) with millisecond lifetimes, and additional supporting lines, are consistent with Cr 3+ substitution for Al 3+ in corundum. Corundum forms in Al-rich, Si-depleted environments through magmatic or metamorphic processes. Given the rocks' small size, association with plagioclase, and location on the crater rim, we interpret the most plausible formation scenario to be impact induced metamorphism at the interface of a felsic and a mafic/ultramafic member with the likely action of fluids at some stage, although other possibilities are not excluded.

Geophysical Research Letters↗
USGS2026

Surface-wave relocation and characterization of the 2024–2025 dyking episode along the Fentale–Dofen segment of the Ethiopian rift

From late-December 2024 to mid-March 2025, a 50-km-long dyke intrusion triggered over 300 earthquakes (magnitude 4 to 5.9) between Fentale and Dofen volcanoes along the Northern Main Ethiopian Rift. Dyke intrusions periodically occur along the Fentale–Dofen magmatic segment and are an expression of ongoing rift extension. Preliminary analyses using interferometric synthetic aperture radar revealed extensive ground deformation (up to 60 cm), which closely matched the temporal and spatial evolution of surface manifestations and earthquake locations from global catalogues. While global catalogues are critical for real-time monitoring, the precision of locations in remote and or sparsely instrumented regions can be low. In this investigation, we present surface-wave relocation results of the dyking episode that began near Fentale volcano in December 2024. We estimate relative locations using differential traveltimes measured from regional-to-teleseismic distance surface-wave observations of earthquakes reported by the U.S. Geological Survey. Relative relocations reduce the initial region of diffuse seismicity to a 50-km-long narrow band bounding the strike of surface manifestations and the zone of maximum surface deformation. We demonstrate the precision of surface-wave relocations over incremental time periods, capturing the progression of dyking from seismic onset through seismic migration and caldera subsidence. Results showcase the utility of surface-wave relocations in the characterization of dyking episodes and provide complementary insights into the current understanding of the Fentale–Dofen volcanic plumbing system.

Geophysical Journal International↗
USGS2023

Slow slip detectability in seafloor pressure records offshore Alaska

In subduction zones worldwide, seafloor pressure data are used to observe tectonic deformation, particularly from megathrust earthquakes and slow slip events (SSEs). However, such measurements are also sensitive to oceanographic circulation-generated pressures over a range of frequencies that conflate with tectonic signals of interest. Using seafloor pressure and temperature data from the Alaska Amphibious Community Seismic Experiment, and sea surface height data from satellite altimetry, we evaluate the efficacy of various seasonal and oceanographic pressure signal proxy corrections and conduct synthetic tests to determine their impact on the timing and amplitude prediction of ramp-like signals typical of SSEs. We find that subtracting out the first mode of the complex empirical orthogonal functions of the pressure records on either the shelf or slope yields signal root-mean-square error (RMS) reductions up to 73% or 80%, respectively. Additional correction with proxies that exploit the depth-dependent spatial coherence of pressure records provides cumulative variance reductions up to 83% and 93%, respectively. Our detectability tests show that the timing and amplitude of synthetic SSE-like ramps can be well constrained for ramp amplitudes ≥4 cm on the shelf and ≥2 cm on the slope, using a fully automated detector. The principal limits on detectability are residual abrupt changes in pressure that occur as part of the transition to and from summer to winter conditions but are not adequately characterized by our seasonal corrections, as well as the inability to properly account for instrumental drift, which is not readily separated from the seasonal signal.

Alaska↗
USGS2025

Uncertainty reduction for subaerial landslide-tsunami hazards

Subaerial rock slopes may generate a tsunami by rapidly moving into the water. Large uncertainty in landslide characteristics propagates into large uncertainty in tsunami hazard, making hazard assessment more difficult for land and emergency managers. Once a potentially tsunamigenic landslide is identified, it may not be clear which landslide characteristics contribute most significantly to uncertainty in the tsunami hazard. Our aim is to document the relative worth of different landslide characteristics (e.g., size, material properties) for reducing uncertainty in landslide-tsunami hazard assessments. Isolating the relative importance of specific landslide characteristics may inform prioritization of data collection and improve efficiency in understanding hazard. To accomplish this, we generated a set of 288 landslide-tsunami simulations in which we systematically varied the size and material properties of possible failure extents at the Barry Arm landslide complex in northwestern Prince William Sound, Alaska, USA. We find that for landslides smaller than the receiving waterbody, the landslide volume has the strongest effect on resulting wave characteristics and thus the highest leverage on reducing uncertainty in tsunami hazard. In contrast, for landslides substantially larger than the waterbody, the duration of rapid movement of the landslide has the highest leverage. Based on our results, we propose a classification scheme for subaerial landslides based on the relative size of the landslide and waterbody. Additionally, our results support the generation of a tsunami height transfer function between existing tide gages and a nearby coastal city. These results have direct implications for the practice of operational early warning.

Alaska↗
USGS2025

Timescales of surface faulting preservation in low-strain intraplate regions from landscape evolution modeling and the geomorphic and historical record

Large surface-rupturing intraplate earthquakes in stable continental regions (SCRs) are uncommon globally and have recurrence intervals of thousands to hundreds of thousands of years based on the paleoseismic and geomorphic record, challenging accurate active fault identification in these regions. To constrain the timescales of preservation for scarps created by surface ruptures from dip-slip earthquakes, we use a two-dimensional scarp diffusion model for typical intraplate settings and explore which parameters influence fault scarp preservation. These parameters include the coseismic vertical surface offset, the recurrence interval of similar magnitude earthquakes, diffusivity (as a proxy for mean annual precipitation rate), and the erodibility of the surficial material. We constrain parameter ranges from a compilation of historical surface ruptures in intraplate settings in a variety of climates, including the Central and Eastern United States, Australia, Europe, Central Asia (Mongolia, China), India, and West Africa. The timescales of scarp preservation from landscape evolution modeling agree well with observations of scarp preservation in low-strain SCR and intraplate tectonic settings, with some notable exceptions for Australian scarps. We find that the erodibility of the surficial material and earthquake recurrence interval have a stronger effect on the timescales of scarp preservation than diffusivity or coseismic vertical surface offset. Our model results may aid in identifying and characterizing subtle, slow-moving active faults in low-strain SCR and intraplate tectonic settings for different tectonic, geomorphic, and climatic characteristics. Accurate fault locations and characterization from the landscape record has implications for both probabilistic seismic and fault displacement hazard analyses.

Journal of Geophysical Research Solid Earth↗