Geology Reports⌕ Search

SEARCH · Geology Reports

Results for “The Depositional Record”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,243 records · Page 69Linked to original sources

Attributes for MRB_E2RF1 Catchments by Major River Basins in the Conterminous United States: Normalized Atmospheric Deposition for 2002, Nitrate (NO3)

This tabular data set represents the average normalized (wet) deposition, in kilograms per square kilometer multiplied by 100, of Nitrate (NO3) for the year 2002 compiled for every MRB_E2RF1 catchment of the Major River Basins (MRBs, Crawford and others, 2006). Estimates of NO3 deposition are based on National Atmospheric Deposition Program (NADP) measurements (B. Larsen, U.S. Geological Survey, written. commun., 2007). De-trending methods applied to the year 2002 are described in Alexander and others, 2001. NADP site selection met the following criteria: stations must have records from 1995 to 2002 and have a minimum of 30 observations. The MRB_E2RF1 catchments are based on a modified version of the U.S. Environmental Protection Agency's (USEPA) ERF1_2 and include enhancements to support national and regional-scale surface-water quality modeling (Nolan and others, 2002; Brakebill and others, 2011). Data were compiled for every MRB_E2RF1 catchment for the conterminous United States covering New England and Mid-Atlantic (MRB1), South Atlantic-Gulf and Tennessee (MRB2), the Great Lakes, Ohio, Upper Mississippi, and Souris-Red-Rainy (MRB3), the Missouri (MRB4), the Lower Mississippi, Arkansas-White-Red, and Texas-Gulf (MRB5), the Rio Grande, Colorado, and the Great basin (MRB6), the Pacific Northwest (MRB7) river basins, and California (MRB8).

Data Series↗

Sediment-transport investigations of the upper Yellowstone River, Montana, 1999 through 2001: Data collection, analysis, and simulation of sediment transport

The upper Yellowstone River in Montana is an important State and national water resource, providing recreational, agricultural, and commercial benefits. Floods in 1996 and 1997, with recorded peak discharges having recurrence intervals close to 100 years, caused substantial streambank erosion and hill- slope mass wasting. Large quantities of sand-, gravel-, and cobble-sized material entrained by the flood flows became flood-bar deposits, creating a source of sediment available for transport during future floods. The flood damage and resulting sedimentation raised concerns about potential streambank-stabilization projects and how the river and riparian corridor might be managed in the future. The U.S. Geological Survey, in cooperation with the Park Conservation District, the Montana Department of Transportation, and the U.S. Army Corps of Engineers, investigated sediment transport in the upper Yellowstone River near Livingston from 1999 through 2001 as part of a cumulative effects study to provide a scientific basis for future river management decisions. The purpose of this report is to present the results of data collection, analysis, and simulation of sediment transport for the upper Yellowstone River. The study area included a 13.5-mile study reach of the upper Yellowstone River where substantial sediment transport occurred in 1996 and 1997. In this study area, the upper Yellowstone River is a high gradient, coarse-bed stream having a slope of about 0.0028 foot per foot or more than 14 feet per mile. The study area drains about 3,551 square miles, and runoff results primarily from snowmelt during the spring and summer months. As part of sediment-transport investigations, the U.S. Geological Survey surveyed river cross sections, characterized streambed-material particle size using particle counts and sieve analyses, and collected bedload- and suspended-sediment data during three runoff seasons (1999-2001). Data were collected for stream discharges that ranged from 2,220 cubic feet per second (typical of pre- and post-runoff discharge) to 25,100 cubic feet per second (about 125 percent of bankfull discharge). The distribution of streambed-material particle size was determined, and sediment-transport curves for bedload discharge, suspended-sediment discharge, and total-sediment discharge were developed. The threshold values of streamflow and average stream velocity needed for initiation of bedload transport for selected sediment-size classes showed that little to no bedload was transported for an average stream velocity below about 3 feet per second, and the only particle size transported as bedload at that velocity was sand. Over the range of stream discharges sampled and with silt- and finer-sized particles excluded, bedload discharge averaged about 18 percent of the total-sediment discharge, equal to bedload discharge plus suspended-sediment discharge. At the lowest and highest stream discharges sampled, bedload was, respectively, less than about 2 percent and about 30 percent of the total-sediment discharge. Over the range of stream discharges sampled, the sand-sized part of the total suspended-sediment discharge averaged about 48 percent, where the total suspended-sediment discharge included sand-, silt- and finer-sized particles. At the lowest and highest stream discharges sampled, the sand-sized part of the total suspended-sediment discharge was, respectively, less than about 16 percent and about 50 percent of the total suspended-sediment discharge. The sediment-transport curves were compared to curves for selected sites in the western United States having drainage areas ranging from 21 square miles to over 20,000 square miles. Daily sediment loads transported at bankfull discharge were calculated for each site and results were plotted in relation to drainage area. Results based on the 1999-2001 data-collection period indicate that the estimated daily bedload transported at bankfull discharge in the upper Yellowstone River exceeded the envelope line that bounds the upper end of the data for other selected sites in the Northern Rocky Mountains and is similar in magnitude to that for selected sites in Alaska having braided channels and glacial and snowmelt runoff. Similar comparisons for suspended sediment indicate that daily suspended-sediment load at bankfull discharge is relatively high in the upper Yellowstone River, plotting slightly above the envelope line that bounds the upper end of the data for other selected sites in the Northern Rocky Mountains. Sediment data were used to develop individual transport equations for seven size classes of sediment ranging from small cobbles to very fine sand. A step-wise regression procedure relating sediment discharge to important hydraulic variables showed that average stream velocity was the only significant variable at the 95-percent confidence level. Bedload and suspended-sediment data and equations indicate that more sand is transported for a given velocity than any other particle size, and very little sand-size sediment load is transported below an average stream velocity of about 2.5 feet per second. Transport of coarser-sized sediment (limited to bedload) becomes very little for an average velocity less than about 3.5 feet per second. Results for the 1999-2001 data-collection period indicate that sediment transport in the upper Yellowstone River tends to be limited more by the transport capacity of the stream (capacity or transport limited), than to the availability of sediment in the watershed (supply limited). Sediment data collected and analyzed were used to simulate sediment transport in the study reach using the BRIdge Stream Tube model for Alluvial River Simulation, or BRI-STARS computer model. The model was calibrated and verified using selected data from historical runoff periods. Simulated total-sediment loads, on a reach-averaged basis, were in good agreement with the total-sediment loads determined from the transport curve for the 2-year flood hydrograph but were considerably smaller for the total-sediment loads determined from the transport curve for the 50-, 100-, and 500-year flood hydrographs. The differences probably were largely due to the inability of the model to simulate streambank erosion, hillslope mass-wasting, and other channel-widening processes, which had supplied substantial quantities of sediment to the channel during the 1996 and 1997 floods, and probably continued to contribute to the sediment load in the subsequent years (1999-2001) when the data were collected. Furthermore, the transport curve was applied beyond the measured data for the highest discharges, and may thus be unreliable. Also, the transport curve derived from only limited data may not apply over the full duration of the hydrograph and sediment might be transported over only a portion of the hydrograph, especially for rivers like the upper Yellowstone where snowmelt runoff predominates. The true sediment discharge is, therefore, unknown and might be closer to the simulated values than to the values calculated from the transport curve.

Montana↗

Development and application of generalized-least-squares regression models to estimate low-flow duration discharges in Massachusetts

Physically based mathematical models were developed by use of generalized-least-squares regression analyses to estimate long-term 95-, 98-, and 99-percent duration discharges for ungaged streams in Massachusetts. Duration discharges for 61 sites were used in the recession analyses; 37 sites were streamflow-gaging stations and 24 sites were low-flow partial-record stations. The duration discharges were related to basin chacteristics measured from digital data bases, by use of geographic information systems computer software. Significant chacterisfics used in the models were drainage area, area underlain by stratified-drift deposits per unit of stream length in the basin, and a surrogate for the effective head on the aquifer in the stratified-drift deposits, computed by subtracting the minimum basin elevation from the mean basin elevation. Standard errors of prediction were 57.5, 85.6, and 98.5 percent for models for the 95-, 98-, and 99-percent duration discharges, respectively. Model error variances were about 10 times the sampling error variances, indicating that the precision of future models are likely to be improved more by obtaining better measurements of basin characteristics or by adding new sites to the analyses than by collecting more streamflow data at the sites presently used in the analyses. The models were used to predict duration discharges for 35 selected sites in the Concord River, Noah Coastal, South Coastal, Narragansett and Tenmile River Basins. Ninety-perrcent prediction intervals were computed for the estimates at each of the sites, except at sites where values of the independent variables were outside the ranges of those for the sites used in the regression analyses.

Water-Resources Investigations Report↗

Lead in the Getchell-Turquoise ridge Carlin-type gold deposits from the perspective of potential igneous and sedimentary rock sources in Northern Nevada: Implications for fluid and metal sources

Lead isotope compositions of bulk mineral samples (fluorite, orpiment, and realgar) determined using conventional techniques and of ore-stage arsenian pyrite using the Sensitive High Resolution Ion-Microprobe (SHRIMP) in the Getchell and Turquoise Ridge Carlin - type gold deposits (Osgood Mountains) require contribution from two different Pb sources . One Pb source dominates the ore stage. It has a limited Pb isotope range characterized by 208 Pb/ 206 Pb values of 2.000 to 2.005 and 207 Pb/ 206 Pb values of 0.8031 to 0.8075, as recorded by 10-μm-diameter spot SHRIMP analyses of ore-stage arsenian pyrite. These values approximately correspond to 206 Pb/ 204 Pb of 19.3 to 19.6, 207 Pb/ 204 Pb of 15.65 to 15.75, and 208 Pb/ 204 Pb of 39.2 to 39.5. This Pb source is isotopically similar to that in average Neoproterozoic and Cambrian elastic rocks but not to any potential magmatic sources . Whether those clastic rocks provided Pb to the ore fluid cannot be unequivocally proven because their Pb isotope compositions over the same range as in ore-stage arsenian pyrite are similar to those of Ordovician to Devonian siliciclastic and calcareous rocks. The Pb source in the calcareous rocks most likely is largely detrital minerals, since that detritus was derived from the same sources as the detritus in the Neoproterozoic and Cambrian clastic rocks. The second Pb source is characterized by a large range of 206 Pb/ 204 Pb values (18-34) with a limited range of 208 Pb/ 204 Pb values (38.1-39.5), indicating low but variable Th/U and high and variable U/Pb values. The second Pb source dominates late and postore-stage minerals but is also found in preore sulfide minerals. These Pb isotope characteristics typify Ordovician to Devonian siliciclastic and calcareous rocks around the Carlin trend in northeast Nevada . Petrologically similar rocks host the Getchell and Turquoise Ridge deposits . Lead from the second source was either contributed from the host sedimentary rock sequences or brought into the hydrothermal system by oxidized ground water as the system collapsed. Late ore- and postore-stage sulfide minerals (pyrite, orpiment, and stibnite) from the Betze-Post and Meikle deposits in the Carlin trend and from the Jerritt Canyon mining district have Pb isotope characteristics similar to those determined in Getchell and Turquoise Ridge . This observation suggests that the Pb isotope compositions of their ore fluids may be similar to those at Getchell and Turquoise Ridge . Two models can explain the Pb isotope compositions of the ore-stage arsenian pyrite versus the late ore or postore sulfide minerals. In either model, Pb from the Ordovician to Devonian siliciclastic and calcareous rock source enters the hydrothermal system late in the ore stage but not to any extent during the main stage of ore deposition. In one model, ore-stage Pb was derived from a source with Pb isotope compositions similar to those of the Neoproterozoic and Cambrian clastic sequence, transported as part of the ore fluid and then deposited in the ore-stage arsenian pyrite and fluorite. The second model is based on the observation that the Pb isotope characteristics of the ore-stage minerals also are found in some Ordovician to Devonian calcareous and siliciclastic rocks. Hence, ore-stage Pb could have been derived locally and simply concentrated during the ore stage. Critical to the second model is the removal of all high 206 Pb/ 204 Pb (>20) material during alteration. It Also requires the retention of only the low 206 Pb/ 204 Pb component of the Ordovician to Devonian sedimentary rocks. This critical step is possible only if the high 206 Pb/ 204 Pb values are contained in readily dissolvable mineral phases, whereas the low 206 Pb/ 204 Pb values are found only in refractory minerals that released Pb during a final alteration stage just prior deposition of auriferous arsenian pyrite. Distinguishing between Pb transported with the ore fluid or inherited from the site of mineral deposition is not straightforward; however, it is simpler to explain the Pb isotope compositions of ore-stage arsenian pyrite and fluorite in two different but spatially related Carlin - type deposits ( Getchell and Turquoise Ridge ) with different host rocks by input of Pb with the ore fluid . Once the limited Pb in the hydrothermal fluid was exhausted by incorporation in ore-stage arsenian pyrite or other ore-stage minerals, Pb from the second source , the Ordovician to Devonian sedimentary rock sequences, became available for incorporation in some but not all of the late-stage sulfide minerals.

Nevada↗

Sequential development of platform to off-platform facies of the great American carbonate bank in the central Appalachians

In the central Appalachians, carbonate deposition of the great American carbonate bank began during the Early Cambrian with the creation of initial ramp facies of the Vintage Formation and lower members of the Tomstown Formation. Vertical stacking of bioturbated subtidal ramp deposits (Bolivar Heights Member) and dolomitized microbial boundtsone (Fort Duncan Member) preceded the initiation of platform sedimentation and creation of sand shoal facies (Benevola Member) that was followed by the development of peritidal cyclicity (Daragan Member). Initiation of peritidal deposition coincided with the development of a rimmed platform that would persist throughout much of the Cambrian and Early Odrovician. At the end of deposition of the Waynesboro Formation, the platform became subaerially exposed because of the Hawke Bay regression, bringing the Sauk I supersequence to and end. In the Conestoga Valley of eastern Pennsylvania, Early Cambrian ramp deposition was succeeded by deposition of platform-margin and periplatfrom facies of the Kinzers Formation. The basal Sauk II transgression during the early Middle Cambrian submerged the platform and reinitiated the pertidal cyclicity that had characterized the pre-Hawke Bay deposition, This thick stack of meter-scale cycles is preserved as the Pleasant Hill and Warrior Formations of the Nittany arch, the Elbrook Formation of the Great Valley, and the Zooks Corner Formations of the Conestoga Valley. Deposition of peritidal cycles was interrupted during deposition of the Glossopleura and Bathuriscus-Elrathina Biozones by third-order deepening episodes that submerged the platform with subtidal facies. Regressive facies of the Sauk II supersequence produced platform-wide restrictions and the deposition of the lower sandy member of the Gatesburg Formation, the Big Spring Station Member of the Conococheague Formation, and the Snitz Creek Formation. Submergence of the platform was initiated during the late Steptoean ( Elvinia Zone) with the epansion of extensive subtidal thrombotic boundstone facies. Vertical stacking of no fewer than four of these thrombolite-dominated intervals records third-order deepening episodes separated by intervening shallowing episodes that produced peritidal ribbony and laminated mudcracked dolostone. The maximum deepening of the Sauk III transgression produced the Stonehenge Formation in two separate and distinct third-order submergences. Circulation restriction during the Sauk III regression produced a thick stack of meter-scale cycles of the Rockdale Run Formation, and the lower Bellefonte Dolomite of the Nittany arch (central Pennsylvania). This regressive phase was interrupted by a third-order deepening event that produced the oolitic member of the lower Rockdale Run and the Woodsboro Member of the Grove Formation in the Frederick Valley. Restricted circulation continued into the Whiterockian, with deposition of the upper Rockdale Run and the Pinesberg Station Dolomite in the Great Valley and the missile and upper parts of the Bellefonte Dolomore and the Nittany Arch region. This deposition was continuous from the Ibexian into the Whiterockian; the succession lacks significant unconformities and there are no missing biozones through this interval, the top of which marks the end of the Sauk megasequence. During deposition of the Tippecanoe megasequence, the peritidal shelf cycles were reestablished during deposition of the St. Paul Group. The vertical stacking of lithologies in the Row Park and New Market Limestones represents transgressive and regressice facies of a third-order deepening event. This submergence reached its maximum deepening within the lower Row Park Limestone and extended with the Nittany arch region with deposition of equivalent Loysburg Formation.. Shallow tidal-flat deposits were bordered to the south and east by deep-water ramp deposits of the Lincolnshire Formation. The St. Paul Group is succeeded upsection by ramp facies of the Chamersberg and the Edinburg Formations in the Great Valley, whereas shallow-shelf sedimentation continued in the Nittany-arch area with the depostion of the Hatter Limestoen and the Snyder and Linden Hall Formations. Carbonate deposition on the great American carbonate bank was brought to an end when it was buried beneath clastic flysch deposits of the Martinsberg Formation. Foundering of the bamk was diachronus, and the flysch seidments prograded from east to west.

Maryland, Pennsylvania, Virginia, West Virginia↗

Surficial geology and geomorphology of Potter County, Pennsylvania

Potter County is located in the Appalachian Plateaus of north-central Pennsylvania and contains the headwaters of the Genesee River, the Allegheny River, and the Susquehanna River. Drift of Wisconsin age covers the northeastern part of the county. This study includes a detailed survev of the surficial deposits of the Genesee quadrangle in north-central Potter County and a reconnaissance of the remainder of the county; a soil survey and a botanical survey were carried on concurrently. The region is a deeply dissected plateau having extensive areas of steeply sloping land separated by narrow ridges and valleys; there is very little level land. Near the junction of the three watersheds the uplands rise to altitudes of more than 2,500 feet. The maximum relief in the Susquehanna drainage is more than 1,500 feet; in the Genesee and Allegheny drainage it. is about 800 feet. Valley walls are steep (15° to 30°), and the uplands have gentle slopes (0.5° to 10°). The drainage pattern is trellised. The climate is continental. Temperatures range from about -30° F. to more than 100° F. The average annual precipitation ranges approximately from 34 to 42 inches. Floods may occur at any season of the year. The large volumes of water from rain or melting snow carried by small streams come from springs. There is little precise data on frost in the ground, but it is probable that the ground seldom freezes in forested areas. The soils of Potter County have relatively immature profiles with poorly developed horizons that commonly have many characteristics inherited from their parent materials. At the great soil group level, the zonal soils are divided into Podzol soils and Brown Podzolic soils. Many soils have a high silt content in the upper part of the profile, apparently derived (at least partly) from a mantle of eolian silt. Mos~ of Potter County is covered by second-growth forests consisting of 40- to 60-year-old hardwood stands. The present forests growing on slopes and summits are composed approximately of 25 species of trees. The northern hardwood region includes most of the county, with an oak-forest region near the borders, principally along its southern margin. Potter County is underlain by sandstone, siltstone, shale, conglomerate, and minor amounts of coal and calcareous rock that range in age from Late Devonian to Pennsylvanian. These rocks form broad open folds that strike northeast. South of the border of the Wisconsin drift, and possibly at two localities inside the drift border, are scattered remnants of ancient soils (here called paleosol), that were formed in preWisconsin time-probably during the Sangamon interglacial stage. This paleosol ranges in texture from clay loam to silt loam, ranges in color from yellowish red to red, includes a few percent to more than 25 percent of rock fragments, and apparently contains a small percentage of gibbsite and varying amounts of kaolinite. Known thicknesses range from 1 to 33 feet. Paleosol was developed on diverse kinds of parent material, such as till, stratified drift, colluvium, and residuum, at altitudes ranging from a few hundred to 2,400 feet. The climatic conditions under which the paleosol formed are uncertain; however, these ancient soils may record an episode of subtropical climatic conditions during which lateritic soils were formed. Perhaps these soils are analogous to the Red-Yellow Podzolic soils of southeastern United States. Except for one possible remnant, no pre-Wisconsin drift has been recognized in Potter County. The Wisconsin glacial deposits of Potter County belong to either the Iowan or Tazewell substages and are dominantly till with minor amounts of glaciofluvial deposits. Erratics of igneous or metamorphic rock comprise less than 0.1 percent of the total number of rock fragments. The till is slightly weathered to depths ranging from 3 to about 12 feet. The drift border is indefinite and has been drawn at the southern limit of erratics or well-rounded or striated pebbles and is only locally marked by a terminal moraine or by a distinct change in the surficial deposits. The drift border is relatively straight and crosses the Genesee quadrangle in a northwesterly direction with little regard for the major topographic features, thus suggesting that the Wisconsin ice sheet had a relatively straight and steep front. Over most of the unglaciated part of Potter County, the bedrock is concealed beneath rubble that probably was formed during the Iowan or Tazewell substage, almost contemporaneously with the adjacent drift. In general, the rubble is thickest and most extensive within about 10 miles of the drift border, becoming thinner and less continuous farther away. The apparent parallelism between a belt of thick periglacial deposits and the drift border suggests that the deposits result from climatic factors in operation while the Wisconsin ice sheet was nearby. Ancient soil structures or patterned ground occur at, or near, the surface of both the periglacial deposits and the adjacent drift. These ancient soil structures are so similar to modern forms in arctic or alpine environments that they are considered to be the result of vigorous frost action. Many of the structures are believed to be a result of down-slope movement of debris by solifluction, facilitated by a frozen subsoil as much as 10 feet deep. Perennially frozen ground may have been present, but this is not a prerequisite. The periglacial deposits underlie long smooth slopes that extend from ridge crest to valley bottom. Flood plains are absent near the headwaters of many streams, the valley walls forming a V-shaped profile. While frost action was in progress, forests probably were restricted to flood plains, lower slopes, and scattered upland areas. Large parts of the upland were bare or partly covered by tundra vegetation; elsewhere, there were scattered trees but no dense forest. 1 2 SURFICIAL GEOLOGY AND GEOMORPHOLOGY OF POTTER COUNTY, PENNSYLVANIA Recent alluvium and alluvial fans include sand and sandy loams, 1 to 3 feet thick, that overlie gravel. The alluvium contains organic matter and lenses of finer materials. Thickness ranges from a few to more than 100 feet. Along the principal streams the alluvium probably overlies Pleistocene deposits. Most of the alluvial fans are composed of unstratified rubbly, pebbly, cobbly. or bouldery sandy loams to silty clay loams with local lenses of stratified sand and gravel. The alluvial fans mapped in the Genesee quadrangle probably include both Wisconsin stage and Recent deposits. The summits of the A.ppalachian Plateaus in north-central Pennsylvania have long been recognized as the remnants or traces of one or more peneplains. To test this hypothesis, a restored contour map was prepared to show the configuration of a supposed peneplain on the assumption that the plateau tops are remnants of such an old erosion surface. The restored contours delineate a surface that corresponds roughly to rock structure. In general, the uplands slope parallel to the dip of the bedrock. The major streams, such as the West Branch Susquehanna River, cross the ridges and valleys of the restored surface in such a way that it is difficult to suppose that the restored surface was ever graded to these streams. On the contrary, it is probable that the restored surface never existed and that the plateau tops are structurally controlled surfaces held up by sandstone and conglomerate beds in the Pottsville and Pocono formations. The plateau tops may have been lowered by erosion as much as 200 feet during the Pleistocene-in other words, after the major streams were incised. If this portion of the Appalachian Plateaus was ever reduced to a peneplain, such a hypothetical surface must have lain many hundreds of feet above the uplands of the present day. The only alternative that might involve peneplanation is the improbable hypothesis that the plateau tops are remnants of a slightly deformed peneplain and that the peneplain was folded along the axes of the Appalachian orogeny. This remote possibility is not supported by any known evidence. The geomorphic analysis yields no new data on the origin of the cross-axial drainage. Regardless of whether the plateaus are peneplain remnants or are structurally controlled surfaces, the beginning of the major southeastward-flowing streams long antedates the existing landscape. The geomorphic history of Potter County begins with an assumed long interval of erosion during the Mesozoic and early Cenozoic eras, for which no record remains in this area. The southeast master drainage was established by the latter part of the Tertiary period (perhaps at a much earlier date), probably as the result of the northwestward migration of the Atlanticinterior divide. In late Pliocene(?) time, areas adjacent to parts of the West Branch Susquehanna River-and probably elsewhere-had a moderate relief ranging from 300 to 700 feet. Some segments of the West Branch meandered across a broad valley that lay about 900 feet above the present streams. The landscape probably was covered by deep residual soils, perhaps by saprolite. The early Pleistocene history of Potter County is essentially unknown. No deposits of the Kansan stage are known except for a possible trace of pre-Illinoian drift on the uplands in central Potter County (Ayers Hill quadrangle). Some deposits in central and eastern Pennsylvania may be of Kansan age. It is probable that the assumed Aftonian regolith was removed by mass movements and other processes during the Kansan stage, thus resulting in a lowering of the plateau tops by as much as 10 feet. By the close of the Yarmouth(?) interglacial stage the major streams were incised to essentially their present depths. The climates of the Yarmouth interglacial stage probably produced deep residual soils over the landscape, parts of which may still be preserved in the paleosol remnants of the present day. No Illinoian drift is known in Potter County, but drift assigned to this stage occurs in areas to the northwest and to the southeast. Some valleys, such as Kettle Creek valley, were filled with sand and gravel alluvium to depths of as much as 150 feet above their present flood plains. It is assumed that the Yarmouth residual soils were removed by mass movements and other processes induced by a periglacial climate, thus lowering the plateau tops by as much as 10 feet. During the Sangamon interglacial stage, deep (10-to-20 foot) residual soils or paleosol were developed in Potter County and probably throughout much of Pennsylvania, perhaps as a result of lateritic weathering in a subtropical climate. It is possible that the paleosol was largely removed by mass movements and by running water during late Sangamon time. During either the Iowan or Tazewell substages of the Wisconsin (perhaps the Iowan), the ice sheet advanced into the northeastern part of Potter County. The drift is similar to the Olean drift (local usage). The paleosol was almost completely removed by mass movements and other processes induced· by a periglacial climate, prior to drift deposition. This removal probably resulted in a lowering of the plateau tops by as much as 10 feet since Sangamon time. Nearly contemporaneously with drift deposition, the periglacial deposits were formed by frost heaving, solifluction, and fluvial transport in areas outside the drift border. Soil structures or patterned ground were developed on both the drift and the periglacial deposits. It is probable that the forests in the periglacial area were greatly restricted and that large areas on the uplands were essentially treeless. Little is known about the history of Potter County in postOlean time. Presumably, forests completely covered the county by the onset of the next substage, during which the Binghamton drift of MacClintock and Apfel was deposited. This drift also is found in southern New York State. The formation of the alluvium and alluvial fans probably began in the Tazewell substage and continued during the Recent epoch. Since these deposits were formed there has been very little dissection. There is little, if any, difference between soils developed on periglacial deposits and soils developed on drift. The roots of fallen trees have disturbed the soil horizons, and it is unlikely that the existing soil profiles are more than 500 years old. The forested landscape of Potter County has a distinctive microrelief ranging from a few inches to a few feet of mounds and pits produced by the roots of fallen trees. Most mounds and pits range from 10 to 20 feet in length and from 6 to 15 feet in width. On level land, many mounds are oriented with their long axes trending northward, and in some areas the orientation is random. On slopes, the mounds are oriented with their long axes at right angles to the maximum slope as a result of trees falling downslope. The toppling of trees increases the permeability of surficial deposits and mixes and destroys the soil horizons. The microrelief is a factor in forest development. The toppling of trees on slopes is a significant agent of slope erosion. The process loosens, breaks up, or overturns the upper 2 to 3 feet of the forest soil, and it tends to make the surficial layer more stony and to produce features resembling soil structures.

Pennsylvania↗

Hydrogeology and extent of saltwater intrusion on Manhasset Neck, Nassau County, New York

Manhasset Neck, a peninsula on the northern shore of Long Island, N.Y., is underlain by unconsolidated deposits that form a sequence of aquifers and confning units. Ground water at several public-supply wells has been affected by the intrusion of saltwater from the surrounding embayments (Manhasset Bay, Long Island Sound, Hempstead Harbor). Twenty-two boreholes were drilled during 1992-96 for the collection of hydrogeologic, geochemical, and geophysical data to delineate the subsurface geology and the extent of saltwater intrusion within the peninsula. A series of continuous high-resolution seismic- reflection surveys was completed in 1993 and 1994 to delineate the character and extent of the hydrogeologic deposits beneath the embayments surrounding Manhasset Neck. The new drill-core data indicate two hydrogeologic units--the North Shore aquifer and the North Shore confining unit--where the Lloyd aquifer, Raritan confining unit, and the Magothy aquifer have been completely removed by glacial erosion. Water levels at selected observation wells were measured quarterly throughout the study. These data, and continuous water-level records, indicate that (1) the upper glacial (water-table) and Magothy aquifers are hydraulically connected and that their water levels do not respond to tidal fluctuations, and (2) the Lloyd and North Shore aquifers also are hydraulically connected, but their water levels do respond to pumping and tidal fluctuations. Offshore seismic-reflection surveys in the surrounding embayments, and drill-core samples, indicate at least four glacially eroded buried valleys with subhorizontal, parallel reflectors indicative of draped bedding that is interpreted as infilling by silt and clay. The buried valleys (1) truncate the surrounding coarse-grained deposits, (2) are asymmetrical and steep sided, (3) trend northwest-southeast, (4) are 2 to 4 miles long and about 1 mile wide, and (5) extend to more than 400 feet below sea level. Water from 12 public-supply wells screened in the Magothy and upper glacial aquifers contained volatile organic compounds in concentrations above the New York State Department of Health Drinking Water maximum contaminant levels, as did water from one public- supply well screened in the Lloyd aquifer and from two observation wells screened in the upper glacial aquifer. Five distinct areas of saltwater intrusion have been delineated in Manhasset Neck; three extend into the Lloyd and North Shore aquifers, and two extend into the upper glacial and Magothy aquifers. Borehole-geophysical-logging data indicate that several of these saltwater wedges range from a few feet to more than 125 feet in thickness and have sharp freshwater-saltwater interfaces, and that chloride concentrations within these wedges in 1997 ranged from 102 to 9,750 milligrams per liter. Several public-supply wells have either been shut down or are currently being affected by these saltwater wedges. Data show active saltwater intrusion in at least two of the wedges.

New York↗

Short-term survival of ammonites in New Jersey after the end-Cretaceous bolide impact

A section containing the Cretaceous/Paleogene (= Cretaceous/Tertiary) boundary in Monmouth County, New Jersey, preserves a record of ammonites extending from the end of the Cretaceous into possibly the beginning of the Danian. The section includes the upper part of the Tinton Formation and lower part of the Hornerstown Formation. The top of the Tinton Formation is represented by a richly fossiliferous unit (the Pinna Layer) that contains many bivalves in life position as well as ammonite jaws preserved inside body chambers. Ammonites include Pachydiscus (Neodesmoceras) mokotibensis, Sphenodiscus lobatus, Eubaculites carinatus, E. latecarinatus; Discoscaphites iris, D. sphaeroidalis; D. minardi, and D. jerseyensis. The Pinna Layer probably represents a relatively short interval of time lasting tens to hundreds of years; it is conformably overlain by the Burrowed Unit, which contains a single fragment of Discoscaphites sp. and several fragments of E. latecarinatus, as well as several isolated specimens of ammonite jaws including two of Eubaculites. Examination of the mode of preservation of the ammonites and jaws suggests that they were fossilized during deposition of the Burrowed Unit and were not reworked from older deposits. Based on the ammonites and dinoflagellates in the Pinna Layer and the Burrowed Unit, these strata traditionally would be assigned to the uppermost Maastrichtian, corresponding to calcareous nannofossil Subzone CC26b. However, a weak iridium anomaly (500–600 pg/g) is present at the base of the Pinna Layer, which presumably represents the record of the bolide impact. Correlation with the iridium layer at the Global Stratotype Section and Point at El Kef, Tunisia, would, therefore, imply that these assemblages are actually Danian, provided that the iridium anomaly is in place and the ammonites and dinoflagellates are not reworked. If the iridium anomaly is in place, or even if it has migrated downward from the top of the Pinna Layer, the ammonites would have survived the impact at this site for a brief interval of time lasting from a few days to hundreds of years.

New Jersey↗

Possible fault detection in Cottonball Basin, California: an application of radar remote sensing.

An analysis of a 3-cm wavelength radar image of Cottonball Basin in Death Valley National Monument has revealed the existence of two suspect fault traces in evaporite deposits that are less than 2000-yr old. The traces are well defined on the image because the radar system was able to differentiate surface roughness variations at the centimeter scale. The features are not recognizable on data sets recorded in the visible and near-infrared spectral bands. - from Authors

Remote Sensing of Environment↗

Stable isotope ratios in swale sequences of Lake Superior as indicators of climate and lake level fluctuations during the Late Holocene

Beach ridges along the coastline of Lake Superior provide a long-term and detailed record of lake level fluctuations for the past 4000 cal BP. Although climate change has been invoked to explain these fluctuations, its role is still in debate. Here, we reconstruct water balance by employing peat samples collected from swale deposits present between beach ridge sequences at two locations along the coastline of Lake Superior. Carbon isotope ratios for Sphagnum remains from these peat deposits are used as a proxy for water balance because the presence or absence of water films on Sphagnum controls the overall isotope discrimination effects. Consequently, increased average water content in Sphagnum produces elevated ??13C values. Two maxima of Sphagnum ??13C values interpreted to reflect wetter conditions prevailed from 3400 to 2400 cal BP and from about 1900 to 1400 cal BP. There are two relatively short drier periods as inferred from low Sphagnum ??13C values: one is centered at about 2300 cal BP, and one begins at 1400 cal BP. A good covariance was found between Sphagnum ??13C values and reconstructed lake-levels for Lake Michigan in which elevated carbon isotope values correlate well with higher lake levels. Based on this covariance, we conclude that climate exerts a strong influence on lake levels in Lake Superior for the past 4000 cal BP. ?? 2005 Elsevier Ltd. All rights reserved.

Quaternary Science Reviews↗

Rates and possible causes of neotectonic vertical crustal movements of the emerged southeastern United States Atlantic coastal plain

Emerged Pliocene and Pleistocene shorelines and associated marine deposits were used to determine the magnitude and rate of vertical crustal movement during the past 3 m.y. in the United States Atlantic Coastal Plain of South and North Carolina. On the basis of a new regional ostracode assemblage zonation, planktic biostratigraphic data, and radiometric data, emerged marine deposits were determined to be primarily interglacial and can tentatively be correlated with hemispheric warm intervals in evidence from deep-sea data. The paleontologic evidence indicates a primary glacio-eustatic component to the local sea-level record and a secondary tectonic component. Net vertical uplift rates averaging 1 to 3 cm/1,000 yr, but perhaps as high as 5 to 10 cm/1,000 yr, are in evidence for the emerged Coastal Plain. Although details of the timing of regional rheological events remain obscure, the trend of net uplift contrasts with general subsidence rates of about 2 to 4 cm/1,000 yr since the Cretaceous in submerged parts of the continental margin near subsiding sedimentary troughs. Hydro-isostatic crustal response to multiple deglaciation events may have periodically uplifted the coast, but long-term lithospheric flexural upwarping in response to sediment loading offshore is a more plausible mechanism to explain the present positions of shorelines above present mean sea level. A eustatic sea-level model is proposed for interglacial high stands of the past 3.0 m.y.

Geological Society of America Bulletin↗

VAMPs—Possible hydrocarbon-bearing structures in Bering Sea Basin: Geologic notes

Narrow (1 to 2 km) subsurface columns of concave reflection horizons are common time-base seismic profiles collected in the Bering Sea basin. The columns of recorded downflexures are thought to be velocity pulldowns and commonly are associated with one or more arched or gently domed high-amplitude reflection horizons about 100 m higher in the section. Inferred from this association is that subsurface deposits characterized by anomalously low acoustic velocity are present. We refer to the velocity-anomaly and reflection-amplitude association as a velocity-amplitude feature, or VAMP, and speculate that VAMPs are deep-seated “bright spots” underlain by a strong velocity pulldown possibly caused by gas-charged deposits.

AAPG Bulletin↗

Molybdenite in the Montezuma District of central Colorado

The Montezuma mining district, in the Colorado mineral belt, is defined by an assemblage of porphyry, ore, and altered rocks that originated in the venting of a Tertiary batholith through weak structures in Precambrian rocks. The ore consists of silver-lead-zinc veins clustered on the propylitic fringe of a geometrically complex system of altered rocks, which is centered on the intersection of the Oligocene Montezuma stock with the Montezuma shear zone of Precambrian ancestry. Alteration chemistry conforms to the standard porphyry-metal model but is developed around several small intrusives strung out along the shear zone and is expressed as a mottled pattern, rather than as the usual thick concentric zones centered on one large plug. The distribution of trace amounts of molybdenite is consistent with the postulate of molybdenite deposits in the district, but the mottled alteration pattern may signify small and scattered, possibly very deep, deposits. Disseminated molybdenite is essentially coextensive with altered rock and increases slightly in quantity toward the inner alteration zones. Two groups of molybdenite veins, associated with phyllic and potassic alteration, represent possible diffuse halos of molybdenite deposits. One group of veins resembles the Climax and Henderson deposits but was seen only in a small and isolated area of outcrops. The second group of molybdenite veins is in a bismuth-rich part of the Montezuma stock and underlies an area of bismuth veins; this group records the passage of contact metasomatic ore fluids. Another bismuth-rich area is in the southeast corner of the stock in a region of bismuth veins and may indicate a third group of molybdenite veins.

Circular↗

The geological investigation of the Taurus-Littrow Valley: Apollo 17 landing site

Astronauts Cernan and Schmitt, of Apollo 17, landed in the Taurus-Littrow valley of the Moon on December 11, 1972. Their major objectives were: (1) to sample very ancient lunar material such as might be found in pre-Imbrian highlands as distant as possible from the Imbrium basin, and (2) to sample pyroclastic materials that had been interpreted as significantly younger than the mare basalts returned from previous Apollo landing sites. The crew worked approximately 22 hours on the lunar surface; they traversed about 30 km, collected nearly 120 kg of samples, took more than 2,200 photographs, and recorded many direct geologic observations. The lunar surface data, sample results, and geologic interpretation of orbital photographs are the bases for this geologic synthesis. The Taurus-Littrow massifs are interpreted as the upper part of thick faulted ejecta deposited on the rim of the transient cavity of the large southern Serenitatis basin, which was formed by a meteor impact about 3.9 to 4.0 b.y. ago. The target rocks, predominantly of the dunite-anorthosite-norite-troctolite suite or its metamorphosed equivalents, were fractured, sheared, crushed, and melted by the impact. The resulting mixture of crushed rock and melt was transported up and out of the transient cavity and deposited on and beyond its rim. Hot fragmental to partly molten ejecta and relatively cool cataclasite and relict target rocks were intermixed in a melange of lenses, pods, and veins. Crystallization of melts and thermal metamorphism of fine-grained fragmental debris produced breccia composed of lithic and mineral fragments in a fine-grained, coherent, crystalline matrix. Such breccia dominates the massif samples. Faults that bound the massifs were activated during formation of the basin, so that structural relief of several kilometers, due to high-angle faulting, was imposed on the ejecta almost as soon as it was deposited. Massive slumping, that produced thick wedges of colluvium on the lower massif slopes, probably occurred nearly contemporaneously with the faulting. Sculptured Hills material, perhaps largely cataclasite excavated from the southern Serenitatis basin by the same impact, was then deposited on and around the faulted ejecta of the massifs. Subfloor basalt, estimated to be about 1,400 m thick in the landing site, flooded the Taurus-Littrow graben prior to approximately 3.7 b. y. ago. The basalt is part of a more extensive unit that was broadly warped and cut by extensional faults before the accumulation in Mare Serenitatis of younger, less deformed basalts that overlap it. A thin volcanic ash unit, probably about 3.5 b. y. old, mantled the subfloor basalt and the nearby highlands. It, too, was subsequently overlapped by the younger basalts of Mare Serenitatis. In the time since deposition of the volcanic ash, continued bombardment by meteors and secondary projectiles has produced regolith, a mechanical mixture of debris derived mainly from the subfloor basalt, the volcanic ash, and the rocks of the nearby massifs and Sculptured Hills. The regolith, in combination with the underlying volcanic ash, forms an unconsolidated surficial deposit with an average thickness of about 14 m, sufficiently thick to permit abnormally rapid degradation of the smaller craters, especially those less than 200 m in diameter, so as to create a surface that seems less cratered than do other mare surfaces. Admixture of volcanic ash gives the surface a distinctive dark color, which, in combination with the less cratered appearance, led to the pre-mission interpretation of a young dark mantling unit. The uppermost part of the regolith in the landing area is basalt rich ejecta from the clustered craters of the valley floor. Most of the craters are interpreted as part of a secondary cluster formed by projectiles of ejecta from Tycho. When they struck the face of the South Massif, the projectiles mobilized fine-grained regolith material that was redeposited on the valley floor as the light mantle. Exposure ages suggest that the swarm of secondary projectiles struck the Taurus-Littrow area about 100 m.y. ago. The Lee-Lincoln fault scarp is part of an extensive system of wrinkle ridges and scarps that transect both mare and highlands rocks. The scarp cuts the crater Lara, but the major part of the displacement occurred before deposition of the light mantle. Minor post-light mantle displacement is shown by small extensional faults that cut its surface west of the Lee-Lincoln scarp.

Open-File Report↗

Ground-water data for Michigan, 1981

This report summarizes data on water levels in 124 observation wells and provides information on well locations, depths, altitudes, and aquifers that they tap. Tabulated data include extremes of water levels for 1981 and for the period of record; pumpage of most major groundwater users in the State; and quality data on selected wells. The city of Lansing was the largest reported user of ground-water, pumping 8.6 billion gallons from the Saginaw Formation and glacial deposits.

Michigan↗

Reconnaissance geology of the Jabal Saq Quadrangle, sheet 26/43 C, Kingdom of Saudi Arabia

The Jabal Saq quadrangle is located in the northeastern part of the Arabian Shield at the northern end of the Najd region between lat 26?00' and 26?30' N. and long 43?00' and 43?30' E. The northeastern two-thirds of the quadrangle is underlain by Paleozoic sedimentary rocks, the southwestern one-third by Proterozoic metamorphic and igneous rocks. The oldest rocks in the quadrangle are weakly metamorphosed immature sandstones that may correlate with the Murdama group. They have been intruded by several large plutons ranging in composition from mafic granodiorite to syenogranite. A densely developed fracture cleavage cuts the metamorphic rocks; otherwise, no structural features were recorded. The quadrangle has low mineral potential; no ancient mines were identified. The Dharaymeeah syenogranite forms a large pluton and bears some petrologic resemblance to alkali granites identified elsewhere in the Arabian Shield that have documented potential for containing deposits of lithophile rare metals. Analyses of wadi sediment samples collected in the quadrangle suggest that the syenogranite may also be enriched in some of these elements. The anomalously radioactive Usba monzogranite resembles highly evolved peraluminous granite plutons that elsewhere in the world are associated with deposits of tin and tungsten.

Open-File Report↗

The geologic history of the Moon

More than two decades of study have established the major features of lunar geologic style and history. The most numerous and significant landforms belong to a size-morphology series of simple craters, complex craters, and ringed basins that were formed by impacts. Each crater and basin is the source of primary ejecta and secondary craters that, collectively, cover the entire terra. The largest impacts thinned, weakened, and redistributed feldspathic terracrustal material averaging about 75 km in thickness. Relatively small volumes of basalt, generated by partial remelting of mantle material, were erupted through the thin subbasin and subcrater crust to form the maria that cover 16 percent of the lunar surface. Tectonism has modified the various stratigraphic deposits relatively little; most structures are confined to basins and large craters. This general geologic style, basically simple though complex in detail, has persisted longer than 4 aeons (1 aeon = 10 9 yr). Impacts began to leave a visible record about 4.2 aeons ago, after the crust and mantle had differentiated and the crust had solidified. At least 30 basins and 100 times that many craters larger than 30 km in diameter were formed before a massive impact created the Nectaris basin about 3.92 aeons ago. Impacts continued during the ensuing Nectarian Period at a lesser rate, whereas volcanism left more traces than during pre-Nectarian time. The latest basin-forming impacts created the giant and still-conspicuous Imbrium and Orientale basins during the Early Imbrian Epoch, between 3.85 and 3.80 aeons ago. The rate of crater-forming impacts continued to decline during the Imbrian Period. Beginning in the Late Imbrian Epoch, mare-basalt flows remained exposed because they were no longer obscured by many large impacts. The Eratosthenian Period (3.2-1.1 aeons ago) and the Copernican Period (1.1 aeons ago to present) were times of lesser volcanism and a still lower, probably constant impact rate. Copernican impacts created craters whose surfaces have remained brighter and topographically crisper than those of the more ancient lunar features.

Professional Paper↗

Crustal structure of the coastal and marine San Francisco Bay region, California

As of the time of this writing, the San Francisco Bay region is home to about 6.8 million people, ranking fifth among population centers in the United States. Most of these people live on the coastal lands along San Francisco Bay, the Sacramento River delta, and the Pacific coast. The region straddles the tectonic boundary between the Pacific and North American Plates and is crossed by several strands of the San Andreas Fault system. These faults, which are stressed by about 4 cm of relative plate motion each year, pose an obvious seismic hazard. We have many ways to study earthquake faults. Where faults break the land surface, we may learn valuable information needed for hazard assessment, such as cumulative offset, slip rate, and earthquake history. However, many of the major faults in the region are partly submerged beneath San Francisco and Monterey Bays. Although this situation poses problems in gathering observational data for hazard assessment, bay-region waterways provide an opportunity to study faultzone structure by using marine subsurface-imaging techniques, which are easier and cheaper than equivalent studies on land. In 1993, the U.S. Geological Survey (USGS) launched a 5-year project aimed at unearthing the basic science of the submerged San Andreas strike-slip fault system in the San Francisco Bay region with its many interacting strands. Primary project goals were structural, such as to discover how the San Andreas and Hayward Faults are connected or related at depth, to learn how the complex of faults in the San Andreas stepover zone on the Golden Gate platform functions, and to locate previously unknown faults. This volume thus contains mostly structural information about the San Francisco Bay region, much of it gathered through exploratory geophysical experiments. The volume is organized “top down,” from studies in the shallowest crust to the base of the crust. The first three chapters are linked through their use of novel geophysical techniques to study earthquake effects, coseismic slip, and shallow stratigraphy. Kayen and others examine crustal structure at very high resolution and demonstrate the use of ground-penetrating-radar tomography to measure the liquefaction potential of coastal sedimentary deposits. McGann and others use microfossils from drill cores along the San Francisco-Oakland Bay Bridge to determine a more detailed late Pleistocene stratigraphy of San Francisco Bay than was previously available. Geist and Zoback use the historical record of a small local tsunami generated by the great 1906 San Francisco earthquake to model the rupture process of that earthquake. The last four chapters are dedicated to studies of fault related structure of the seismogenic crust in and around the San Andreas Fault system in the San Francisco Bay region. Jachens and others compile an aeromagnetic anomaly map from new high-resolution flights across the bay region. Some of these anomalies mark the positions of offshore faults, and others are offset by faults, providing constraints on cumulative slip. Hart and others concisely summarize the marine seismic data recorded in and around San Francisco Bay, map the coverage, and provide archival information for those interested in acquiring data. The last two chapters present the results of the seismic data that have been analyzed. Bruns and others present their analysis of high-quality intermediate-resolution (~5-km penetration) seismic-reflection data gathered over the complex San Andreas-San Gregorio Fault junction. This junction, which is thought to be where the 1906 San Francisco earthquake originated (see Geist and Zoback, this volume), contains an apparent extensional right stepover in the San Andreas Fault. Finally, Parsons and others review and summarize the results of deep-crustal seismic-reflection experiments and local-earthquake tomographic studies, including previously unpublished data, and provide additional support and discussion for already-published studies. In summary, these studies were carried out in an environment where background information on faults in the San Francisco Bay region was sought. Much of the structural information presented here comes from experiments of a style unlikely to be conducted by the USGS in the near future. Together, the chapters in this volume provide a structural framework for a major part of a complex strike-slip fault system.

California↗