Geology Reports⌕ Search

SEARCH · Geology Reports

Results for “Surveys in Geophysics”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,225 records · Page 68Linked to original sources
USGS2002

Hydrogeology and extent of saltwater intrusion on Manhasset Neck, Nassau County, New York

Manhasset Neck, a peninsula on the northern shore of Long Island, N.Y., is underlain by unconsolidated deposits that form a sequence of aquifers and confning units. Ground water at several public-supply wells has been affected by the intrusion of saltwater from the surrounding embayments (Manhasset Bay, Long Island Sound, Hempstead Harbor). Twenty-two boreholes were drilled during 1992-96 for the collection of hydrogeologic, geochemical, and geophysical data to delineate the subsurface geology and the extent of saltwater intrusion within the peninsula. A series of continuous high-resolution seismic- reflection surveys was completed in 1993 and 1994 to delineate the character and extent of the hydrogeologic deposits beneath the embayments surrounding Manhasset Neck. The new drill-core data indicate two hydrogeologic units--the North Shore aquifer and the North Shore confining unit--where the Lloyd aquifer, Raritan confining unit, and the Magothy aquifer have been completely removed by glacial erosion. Water levels at selected observation wells were measured quarterly throughout the study. These data, and continuous water-level records, indicate that (1) the upper glacial (water-table) and Magothy aquifers are hydraulically connected and that their water levels do not respond to tidal fluctuations, and (2) the Lloyd and North Shore aquifers also are hydraulically connected, but their water levels do respond to pumping and tidal fluctuations. Offshore seismic-reflection surveys in the surrounding embayments, and drill-core samples, indicate at least four glacially eroded buried valleys with subhorizontal, parallel reflectors indicative of draped bedding that is interpreted as infilling by silt and clay. The buried valleys (1) truncate the surrounding coarse-grained deposits, (2) are asymmetrical and steep sided, (3) trend northwest-southeast, (4) are 2 to 4 miles long and about 1 mile wide, and (5) extend to more than 400 feet below sea level. Water from 12 public-supply wells screened in the Magothy and upper glacial aquifers contained volatile organic compounds in concentrations above the New York State Department of Health Drinking Water maximum contaminant levels, as did water from one public- supply well screened in the Lloyd aquifer and from two observation wells screened in the upper glacial aquifer. Five distinct areas of saltwater intrusion have been delineated in Manhasset Neck; three extend into the Lloyd and North Shore aquifers, and two extend into the upper glacial and Magothy aquifers. Borehole-geophysical-logging data indicate that several of these saltwater wedges range from a few feet to more than 125 feet in thickness and have sharp freshwater-saltwater interfaces, and that chloride concentrations within these wedges in 1997 ranged from 102 to 9,750 milligrams per liter. Several public-supply wells have either been shut down or are currently being affected by these saltwater wedges. Data show active saltwater intrusion in at least two of the wedges.

New York↗
USGS2012

Quantification of aquifer properties with surface nuclear magnetic resonance in the Platte River valley, central Nebraska, using a novel inversion method

Surface nuclear magnetic resonance, a noninvasive geophysical method, measures a signal directly related to the amount of water in the subsurface. This allows for low-cost quantitative estimates of hydraulic parameters. In practice, however, additional factors influence the signal, complicating interpretation. The U.S. Geological Survey, in cooperation with the Central Platte Natural Resources District, evaluated whether hydraulic parameters derived from surface nuclear magnetic resonance data could provide valuable input into groundwater models used for evaluating water-management practices. Two calibration sites in Dawson County, Nebraska, were chosen based on previous detailed hydrogeologic and geophysical investigations. At both sites, surface nuclear magnetic resonance data were collected, and derived parameters were compared with results from four constant-discharge aquifer tests previously conducted at those same sites. Additionally, borehole electromagnetic-induction flowmeter data were analyzed as a less-expensive surrogate for traditional aquifer tests. Building on recent work, a novel surface nuclear magnetic resonance modeling and inversion method was developed that incorporates electrical conductivity and effects due to magnetic-field inhomogeneities, both of which can have a substantial impact on the data. After comparing surface nuclear magnetic resonance inversions at the two calibration sites, the nuclear magnetic-resonance-derived parameters were compared with previously performed aquifer tests in the Central Platte Natural Resources District. This comparison served as a blind test for the developed method. The nuclear magnetic-resonance-derived aquifer parameters were in agreement with results of aquifer tests where the environmental noise allowed data collection and the aquifer test zones overlapped with the surface nuclear magnetic resonance testing. In some cases, the previously performed aquifer tests were not designed fully to characterize the aquifer, and the surface nuclear magnetic resonance was able to provide missing data. In favorable locations, surface nuclear magnetic resonance is able to provide valuable noninvasive information about aquifer parameters and should be a useful tool for groundwater managers in Nebraska.

Nebraska↗
USGS1993

Summary of the mineral- and energy-resource endowment, BLM roswell resource area, east-central New Mexico

In this summary of two comprehensive resource reports produced by the U.S. Bureau of Mines and the U.S. Geological Survey for the U.S. Bureau of Land Management, we discuss the mineral- and energyresource endowment of the 14-millon-acre Roswell Resource Area, New Mexico, managed by the Bureau of Land Management. The Bureau and Survey reports result from separate studies that are compilations of published and unpublished data and integrate new findings on the geology, geochemistry, geophysics, mineral, industrial, and energy commodities, and resources for the seven-county area. The reports have been used by the Bureau of Land Management in preparation of the Roswell Resource Area Resource Management Plan, and will have future use in nationwide mineral- and energy-resource inventories and assessments, as reference and training documents, and as public-information tools. In the Roswell Resource Area, many metals, industrial mineral commodities, and energy resources are being, or have been, produced or prospected. These include metals and high-technology materials, such as copper, gold, silver, thorium, uranium and/or vanadium, rare-earth element minerals, iron, manganese, tungsten, lead, zinc, and molybdenum; industrial mineral resources, including barite, limestone/dolomite, caliche, clay, fluorspar, gypsum, scoria, aggregate, and sand and gravel; and fuels and associated resources, such as oil, gas, tar sand and heavy oil, coal, and gases associated with hydrocarbons. Other commodities that have yet to be identified in economic concentrations include potash, halite, polyhalite, anhydrite, sulfur, feldspar, building stone and decorative rock, brines, various gases associated with oil and gas exploration, and carbon dioxide. ?? 1993 Oxford University Press.

Nonrenewable Resources↗
USGS2016

Developing integrated methods to address complex resource and environmental issues

Introduction This circular provides an overview of selected activities that were conducted within the U.S. Geological Survey (USGS) Integrated Methods Development Project, an interdisciplinary project designed to develop new tools and conduct innovative research requiring integration of geologic, geophysical, geochemical, and remote-sensing expertise. The project was supported by the USGS Mineral Resources Program, and its products and acquired capabilities have broad applications to missions throughout the USGS and beyond. In addressing challenges associated with understanding the location, quantity, and quality of mineral resources, and in investigating the potential environmental consequences of resource development, a number of field and laboratory capabilities and interpretative methodologies evolved from the project that have applications to traditional resource studies as well as to studies related to ecosystem health, human health, disaster and hazard assessment, and planetary science. New or improved tools and research findings developed within the project have been applied to other projects and activities. Specifically, geophysical equipment and techniques have been applied to a variety of traditional and nontraditional mineral- and energy-resource studies, military applications, environmental investigations, and applied research activities that involve climate change, mapping techniques, and monitoring capabilities. Diverse applied geochemistry activities provide a process-level understanding of the mobility, chemical speciation, and bioavailability of elements, particularly metals and metalloids, in a variety of environmental settings. Imaging spectroscopy capabilities maintained and developed within the project have been applied to traditional resource studies as well as to studies related to ecosystem health, human health, disaster assessment, and planetary science. Brief descriptions of capabilities and laboratory facilities and summaries of some applications of project products and research findings are included in this circular. The work helped support the USGS mission to “provide reliable scientific information to describe and understand the Earth; minimize loss of life and property from natural disasters; manage water, biological, energy, and mineral resources; and enhance and protect our quality of life.” Activities within the project include the following: Spanned scales from microscopic to planetary; Demonstrated broad applications across disciplines; Included life-cycle studies of mineral resources; Incorporated specialized areas of expertise in applied geochemistry including mineralogy, hydrogeology, analytical chemistry, aqueous geochemistry, biogeochemistry, microbiology, aquatic toxicology, and public health; and Incorporated specialized areas of expertise in geophysics including magnetics, gravity, radiometrics, electromagnetics, seismic, ground-penetrating radar, borehole radar, and imaging spectroscopy. This circular consists of eight sections that contain summaries of various activities under the project. The eight sections are listed below: Laboratory Facilities and Capabilities, which includes brief descriptions of the various types of laboratories and capabilities used for the project; Method and Software Development, which includes summaries of remote-sensing, geophysical, and mineralogical methods developed or enhanced by the project; Instrument Development, which includes descriptions of geophysical instruments developed under the project; Minerals, Energy, and Climate, which includes summaries of research that applies to mineral or energy resources, environmental processes and monitoring, and carbon sequestration by earth materials; Element Cycling, Toxicity, and Health, which includes summaries of several process-oriented geochemical and biogeochemical studies and health-related research activities; Hydrogeology and Water Quality, which includes descriptions of innovative geophysical, remote-sensing, and geochemical research pertaining to hydrogeology and water-quality applications; Hazards and Disaster Assessment, which includes summaries of research and method development that were applied to natural hazards, human-caused hazards, and disaster assessments; and Databases and Framework Studies, which includes descriptions of fundamental applications of geophysical studies and of the importance of archived data.

Circular↗
USGS2012

Construction diagrams, geophysical logs, and lithologic descriptions for boreholes USGS 103, 105, 108, 131, 135, NRF-15, and NRF-16, Idaho National Laboratory, Idaho

This report, prepared in cooperation with the U.S. Department of Energy, summarizes construction, geophysical, and lithologic data collected from about 4,509 feet of core from seven boreholes deepened or drilled by the U.S. Geological Survey (USGS), Idaho National Laboratory (INL) Project Office, from 2006 to 2009 at the INL. USGS 103, 105, 108, and 131 were deepened and cored from 759 to 1,307 feet, 800 to 1,409 feet, 760 to 1,218 feet, and 808 to 1,239 feet, respectively. Boreholes USGS 135, NRF-15, and NRF-16 were drilled and continuously cored from land surface to 1,198, 759, and 425 feet, respectively. Cores were photographed and digitally logged by using commercially available software. Borehole descriptions summarize location, completion date, and amount and type of core recovered.

Idaho↗
USGS1987

Single-channel seismic-reflection profiles collected aboard R/V POWELL, cruises P-2-85, P-3-85, P-4-85 in the nearshore waters around Puerto Rico and the Virgin Islands

Approximately 4,600 nmi (8,519 km) of single-channel seismic-reflection data were collected in the nearshore waters around Puerto Rico and the Virgin Islands simultaneously, but on a noninterference basis, with a gravity program funded by the Defense Mapping Agency. The survey was conducted on cruises P-2-85, P-3-85, and P-4-85 of the R/V POWELL between February 28 and April 8, 1985. Seismic instrumentation included two 40 in 3 (755 cm 3 ) airguns and a 200-ft (60-m) single-channel hydrophone streamer. In addition, a Uniboom sled and 8-ft (2.4-m) single-channel hydrophone streamer were used in water depths less than 660 ft (200 m). Navigation control was provided by a Magnavox Integrated Navigation System which integrates data from Global Positioning System (GPS) satellites, transit satellites, bottom-track sonar, Loran-C, Mini-Ranger stations, gyrocompass and speed log. GPS provided the most accurate navigational control, but was functional for only about 12 hours each day. The transit satellite system operated throughout the cruise and provided relatively accurate positions when GPS was not operational. The Mini-Ranger stations proved to be unreliable because of problems at the shore stations and Loran-C operated only on the north side of the islands, at times in only the range-range mode. Because the gravity program required accurate data and strict navigation control, some lines had to be run more than once or run with a following sea in a westerly direction only. Consequently, there is tight line spacing in some areas. The Uniboom high-resolution reflection data are good to poor in the shelf areas around Puerto Rico but are generally poor over the predominantly carbonate sediments around the Virgin Islands. The airgun data are fair to good, particularly considering the ship cruised at about 7 kn (13.0 km/hr) and at times reached 8 kn (14.8 km/hr) which is about the upper limit at which the system will function. Original seismic profile records can be seen at the U.S. Geological Survey offices, Woods Hole, MA 02543. Microfilm copies of the seismic profile records and trackchart can be purchased only from the National Geophysical Data Center, Code E64, 325 Broadway, Boulder, CO 80303 (303/497-6345).

Open-File Report↗
USGS2009

Results and Interpretations of U.S. Geological Survey Data Collected In and Around the Tuba City Open Dump, Arizona

This Open-File Report was originally an Administrative Report presentation to the Bureau of Indian Affairs based on U.S. Geological Survey data that has been collected and presented in four previous reports (Open-File Reports 2009-1020, 2008-1380, and 2008-1374, and an Administrative Report on geophysical data). This presentation was given at a technical meeting requested by the BIA on March 3 and 4, 2009, in Phoenix, Arizona. The idea for this meeting was for all the technical people working on issues related to the Tuba City Open Dump site to come together and share their data collection procedures, results, interpretations, and working hypotheses. The meeting goal was to have a clear record of each party's interpretations and a summary of additional data that would be needed to solve differences of opinion. The intention of this presentation is not to provide an exhaustive summary of U.S. Geological Survey efforts at the Tuba City Open Dump site given in the four previously published Open-File Reports listed above, since these reports have already been made available. This presentation briefly summarizes the data collected for those reports and provides results, interpretations, and working hypotheses relating to the data available in these reports. The major questions about the Tuba City Open Dump addressed by the U.S. Geological Survey are (1) what are the sources for uranium and other constituents found in the ground water in and around the Tuba City Open Dump, (2) what is the current distribution of ground water contaminants away from the Tuba City Open Dump (can plume limits be delineated), and (3) what controls the mobility of uranium and other constituents in and around the Tuba City Open Dump? Data collection, results, and interpretations by the U.S. Geological Survey that address these questions are presented herein.

Open-File Report↗
USGS2017

Geophysics- and geochemistry-based assessment of the geochemical characteristics and groundwater-flow system of the U.S. part of the Mesilla Basin/Conejos-Médanos aquifer system in Doña Ana County, New Mexico, and El Paso County, Texas, 2010–12

One of the largest rechargeable groundwater systems by total available volume in the Rio Grande/Río Bravo Basin (hereinafter referred to as the “Rio Grande”) region of the United States and Mexico, the Mesilla Basin/Conejos-Médanos aquifer system, supplies water for irrigation as well as for cities of El Paso, Texas; Las Cruces, New Mexico; and Ciudad Juárez, Chihuahua, Mexico. The U.S. Geological Survey in cooperation with the Bureau of Reclamation assessed the groundwater resources in the Mesilla Basin and surrounding areas in Doña Ana County, N. Mex., and El Paso County, Tex., by using a combination of geophysical and geochemical methods. The study area consists of approximately 1,400 square miles in Doña Ana County, N. Mex., and 100 square miles in El Paso County, Tex. The Mesilla Basin composes most of the study area and can be divided into three parts: the Mesilla Valley, the West Mesa, and the East Bench. The Mesilla Valley is the part of the Mesilla Basin that was incised by the Rio Grande between Selden Canyon to the north and by a narrow valley (about 4 miles wide) to the southeast near El Paso, Tex., named the Paso del Norte, which is sometimes referred to in the literature as the “El Paso Narrows.” Previously published geophysical data for the study area were compiled and these data were augmented by collecting additional geophysical and geochemical data. Geophysical resistivity measurements from previously published helicopter frequency domain electromagnetic data, previously published direct-current resistivity soundings, and newly collected (2012) time-domain electromagnetic soundings were used in the study to detect spatial changes in the electrical properties of the subsurface, which reflect changes that occur within the hydrogeology. The geochemistry of the groundwater system was evaluated by analyzing groundwater samples collected in November 2010 for physicochemical properties, major ions, trace elements, nutrients, pesticides (reported but not used in the assessment), and environmental tracers. The data obtained from these samples (with the exception of the pesticide data) were used to gain insights into processes controlling the groundwater movement through the groundwater system in the study area. Results from the geophysical and geochemical assessments facilitated the interpretation of the geochemical characteristics of the groundwater sources and geochemical groups within the groundwater system. The groundwater-flow system in the study area consists primarily of the Mesilla Basin aquifer system, which can be divided into four hydrogeologic units by using an informal classification scheme based on basin-fill stratigraphy and sedimentology with an emphasis on aquifer characteristics. The four hydrogeologic units are (1) the Rio Grande alluvium, which is the shallow aquifer of the Mesilla Basin within the confines of the Mesilla Valley, and the three hydrogeologic units that compose the Santa Fe Group: (2) the lower part of the Santa Fe Group, which is the least productive zone, (3) the middle part of the Santa Fe Group, which is the primary water-bearing hydrogeologic unit in the basin and is generally saturated, and (4) the upper part of the Santa Fe Group, which is the most productive water-bearing unit within the Santa Fe Group but is only partially saturated in the north and largely unsaturated in the south and western parts of the Mesilla Basin. The helicopter frequency domain electromagnetic survey results indicated that approximately half of the resistivity values were less than 10 ohm-meters at depths of 50 and 100 feet with a transition where the resistivity values changed from relatively high values (greater than 20 ohm-meters) to relatively low resistivity values (less than 10 ohm-meters) near Vado, New Mexico. Slightly more than 25 percent of the gridded resistivity values from the three-dimensional grid of the combined inverse modeling results of the direct-current resistivity and time-domain electromagnetic soundings were equal to or less than 10 ohm-meters with large regions of low resistivity becoming apparent in the southernmost part of the study area near the Paso Del Norte where these low resistivity features are spatially the widest at or below the top of the bedrock. These low resistivity values might represent clayey deposits, sediments composed largely of sand and gravel saturated with saline water, or both. Historical dissolved-solids-concentration data within the surface geophysical subset area of the study area were compiled and compared to the inverse modeling results of the combined direct-current resistivity and time-domain soundings; this comparison was done to strengthen the interpretation made from the combined inverse modeling results that the low resistivity features were representative of sand and gravel deposits saturated with saline water and not clayey deposits. Water-level altitudes within the Rio Grande alluvium generally decreased from north to south, with a west to east decrease in water-level altitudes near Las Cruces, New Mexico, as a result of groundwater pumping. Groundwater flow within the Santa Fe Group is more complex than the groundwater flow within the Rio Grande alluvium because of the larger lateral and vertical extent of the Santa Fe Group compared to the Rio Grande alluvium. Groundwater from the Organ Mountains flows directly south towards the Paso del Norte. Groundwater from the Robledo Mountains, the Rough and Ready Hills, and the Sleeping Lady Hills generally flows to the southeast. Groundwater flowing near the north end of the midbasin uplift generally continues east towards the Rio Grande and then flows south on the east side of the midbasin uplift. Groundwater flowing near the west side of the midbasin uplift generally continues south parallel to the faults that make up the midbasin uplift and then flows east towards the Paso del Norte when it reaches the south end of the midbasin uplift. Groundwater from the Aden Hills and the East and West Potrillo Mountains flows to the south end of the midbasin uplift and then continues east towards the Paso del Norte. Throughout most of the Mesilla Valley, the vertical hydraulic gradient was downward because the water-level altitude in the Rio Grande alluvium was higher than it was in the Santa Fe Group, but in some areas (typically in the middle and southern parts of the Mesilla Valley), the vertical hydraulic gradient was substantially reduced or even reversed to an upward hydraulic gradient. The geochemistry data indicate that there was a complex system of multiple geochemical endmembers and mixing between these endmembers with recharge to the Rio Grande alluvium and Santa Fe Group composed mostly of seepage from the Rio Grande, inflows from deeper or neighboring water systems, and mountain-front recharge. Five distinct geochemical groups were identified in the Mesilla Basin study area: (1) ancestral Rio Grande (pre-Pleistocene) geochemical group, (2) modern Rio Grande (Pleistocene to present) geochemical group, (3) mountain-front geochemical group, (4) deep groundwater upwelling geochemical group, and (5) unknown freshwater geochemical group. The ancestral Rio Grande groundwater was water that recharged into the system as seepage losses from the ancestral Rio Grande; this groundwater generally flows from north to south-southeast towards the Paso del Norte. Groundwater on the west side of the midbasin uplift generally flows south until it reaches the southern part of the study area; from the southern part of the study area, the groundwater flows east towards the Paso del Norte. Groundwater on the east side of the midbasin uplift flows south-southeast towards the Paso del Norte where it mixes with groundwater from the modern Rio Grande, uplifted areas in the west, and the deep saline source. The water type of the modern Rio Grande geochemical group ranged from calcium-sulfate water type in the northern part of the study area to sodium-chloride-sulfate water type in the southern part of the study area; from north to south there was a substantial increase in specific conductance, strontium-87/strontium-86 ratio, potassium, and the trace metals of iron and lithium, changing the water chemistry such that it became similar to the water chemistry of the deep groundwater upwelling geochemical group. From age-dating results, water in the modern Rio Grande geochemical group was recharged to the Rio Grande alluvium within the past 10 years. The mountain-front geochemical group was generally old water (apparent age was greater than 10,000 carbon-14 years before present) that was somewhat mineralized and has relatively high concentrations of fluoride and silica, which might indicate longer exposure to volcanic and siliciclastic rocks or aluminosilicate minerals. There were five different locations of recharge determined from the groundwater geochemistry within the mountain-front geochemical group, all having a slightly different geochemical signature: (1) the Rough and Ready Hills, Robledo Mountains, and the Sleeping Lady Hills, (2) the Doña Ana Mountains, (3) the Aden Hills and West Potrillo Mountains, (4) the East Potrillo Mountains, and (5) the Sierra Juárez in Mexico. The groundwater from the Rough and Ready Hills, Robledo Mountains, the Sleeping Lady Hills, and the Doña Ana Mountains generally flows toward the Rio Grande and eventually mixes together and with the modern Rio Grande groundwater. The groundwater originating from the Aden Hills and East and West Potrillo Mountains generally flows east to southeast at a slow rate and eventually mixes and continues east, where it mixes with groundwater from the ancestral Rio Grande geochemical group and with the groundwater from the Sierra Juárez. The groundwater from the Sierra Juárez flows north and then east towards the Paso del Norte where it mixes with groundwater from the uplifted areas in the west, ancestral and modern Rio Grande groundwater, and the upwelling groundwater from a deep saline source. The deep groundwater upwelling geochemical group had the highest concentrations of bicarbonate, potassium, silica, aluminum, iron, and lithium within the study area, indicating that it had been in contact with carbonate and siliciclastic rocks for a much longer period of time and at higher temperatures compared to the other geochemical groups, and was most likely ancient marine groundwater originating from the Paleozoic and Cretaceous carbonate rocks which was upwelling into the Mesilla Basin aquifer system in the southeastern part of the study area through the extensive fault systems. Direct-current resistivity and time-domain electromagnetic soundings support the interpretation of ancient marine groundwater upwelling into the Mesilla Basin aquifer system, as do the analytical results from wells, and the helicopter frequency domain electromagnetic data collected along the Rio Grande. The hydrogen-2/hydrogen-1 ratio and oxygen-18/oxygen-16 ratio isotopic results for samples in the unknown freshwater geochemical group did not plot on the Rio Grande evaporation line, indicating this group did not have a Rio Grande signature (that is, there was no isotopic evidence of a component of Rio Grande water) and it also had the lowest mineralized content of any geochemical group in the study area.

New Mexico, Texas↗
USGS1985

Selected test-well data from the MX-missile siting study, Tooele, Juab, Millard, Beaver, and Iron Counties, Utah

This report contains well data collected from 1979 to 1983 in a part of the Great Basin in western Utah (fig. 1). The area is characterized by a series of generally north-trending mountain ranges separated by alluviumfilled basins that are partially filled with sedimentary deposits eroded from the adjacent mountains and lacustrine sediments deposited by Lake Bonneville. Most of the intermountain basins are elongated in the northward direction, but some are almost equidimensional. This report was prepared as part of the Great Basin Regional AquiferSystem Analysis (RASA) program. The report is intended to make well data from the MX-missile siting study readily available to water-resource managers and the general public. It includes well data obtained in areas for which little or no such data have been published previously. Well-drilling and well-completion data were compiled by Ertec, Inc. (formerly Fugro National, Inc.) under contract with the U. S. Air Force. Those data along with aquifer test data, geophysical logs, and drillers1 or geologists1 logs were obtained from Ertec, Inc. under an agreement with the U.S. Air Force. The authors thank the officials of both Ertec, Inc. and the U.S. Air Force for their helpful cooperation. The U.S. Geological Survey obtained accurate locations of the test wells (pi. 1) and accurate water-level measurements in those wells (table 1). Chemical analyses of water samples collected from several of the test wells drilled in the Sevier Desert have been published in a report by Enright and Holmes (1982, table 5). Test drilling for the MX-missile siting study consisted of two parts, the verification phase and the water-resources phase. The verification jhase was designed to obtain information necessary for the design and construction of the MX-basing system. Numerous small diameter wells were bored with depths ranging from 92 to 205 feet. Two-inch diameter JVC casing with the bottom 20 feet perforated was installed in each borehole. The water-resources phase was designed to determine ground-water availibility and to estimate the effects of ground-water withdrawals required for the construction of the MX-basing system. Six large-diameter production test wells were drilled along with associated small-diameter observation wells. Depths ranged from 310 to 1,399 feet. Lithologic logs for selected production test wells or associated observation wells are listed in table 2. Geophysical logs and aquifer test data are available in the files of the U. S. Geological Survey, as indicated in table 1.

Utah↗
USGS2011

Improving stream studies with a small-footprint green lidar

Technology is changing how scientists and natural resource managers describe and study streams and rivers. A new generation of airborne aquatic-terrestrial lidars is being developed that can penetrate water and map the submerged topography inside a stream as well as the adjacent subaerial terrain and vegetation in one integrated mission. A leading example of these new cross-environment instruments is the Experimental Advanced Airborne Research Lidar (EAARL), a NASAbuilt sensor now operated by the U.S. Geological Survey (USGS) [Wright and Brock, 2002].

Eos, Transactions, American Geophysical Union↗
USGS2014

Report of the Committee on Underground Waters, 1934–35

The annual report this year consists almost wholly of a brief summary of investigations in progress in different parts of the country. It is by no means complete, and the Chairman of the Committee will be glad to receive information in regard to investigations that have not been mentioned. The outstanding feature of the past year has been the focusing of public attention on problems of underground water, as a result of the drought-conditions, the activities of the National and State resource and planning surveys, and the creation of emergency-relief projects.

Eos, Transactions, American Geophysical Union↗
USGS2019

Crustal magmatism and anisotropy beneath the Arabian Shield - A cautionary tale

Volcanism in Saudi Arabia includes a historic eruption close to the holy city of Al Madinah. As part of a volcanic hazard assessment of this area, magnetotelluric (MT) data were collected to investigate the structural setting, the distribution of melt within the crust, and the mantle source of volcanism. Interpretation of a new 3‐D resistivity model includes a shallow graben beneath thin lava fields (Harrats), a melt‐free upper crust, and decompression melting in the asthenosphere below thin lithosphere. Within the lower crust the model images elongate conductivity anomalies, one of which was attributed in a previous MT study to melt. The regional MT data, combined with perspective from geology and geophysical modeling, suggest the lower crust is anisotropic with no interconnected melt zones. These divergent interpretations have distinct hazard implications and highlight the importance of large survey aperture and anisotropic modeling to MT studies of volcanic regions. Lower‐crustal anisotropy extends beyond the Harrat, with the most conductive direction oriented N10°E and a factor of 3–5, determined from 2‐D anisotropic inversion, between the most and least conductive directions. The enhanced conductivity is likely due to interconnected grain boundary graphite, while the anisotropy direction reflects either frozen‐in fabric from Neoproterozoic stabilization of the Arabian Shield or modern ductile deformation driven by channelized asthenospheric flow coupled through a thin rigid mantle lid. Asthenospheric melt is interpreted to transect the crust primarily through diking, with limited melt storage and short residence times in the crust.

Arabian Shield↗