Geology Reports⌕ Search

SEARCH · Geology Reports

Results for “Sedimentary Geology”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,135 records · Page 63Linked to original sources
USGS2012

Sea-floor character and sedimentary processes of Block Island Sound, offshore Rhode Island

Gridded multibeam bathymetry covers approximately 634 square kilometers of sea floor in Block Island Sound. Although originally collected for charting purposes during National Oceanic and Atmospheric Administration hydrographic surveys H12009, H12010, H12011, H12015, H12033, H12137, and H12139, these combined acoustic data and the sea-floor sediment sampling and photography stations subsequently occupied to verify them during U.S. Geological Survey cruise 2011-006-FA (1) show the composition and terrain of the seabed, (2) provide information on sediment transport and benthic habitat, and (3) are part of an expanding series of studies that provide a fundamental framework for research and management activities (for example, wind farms and fisheries) along the Rhode Island inner continental shelf.

Rhode Island↗
USGS2017

Sources and dispersal of land-based runoff from small Hawaiian drainages to a coral reef: Insights from geochemical signatures

Land-based sediment and contaminant runoff is a major threat to coral reefs, and runoff reduction efforts would benefit from knowledge of specific runoff sources. Geochemical signatures of small drainage basins were determined in the fine fraction of soil and sediment, then used in the nearshore region of a coral reef-fringed urban embayment on southeast Oahu, Hawaii, to describe sources and dispersal of land-based runoff. The sedimentary rare earth element ratio (La/Yb)N showed a clear distinction between the two main rock types in the overall contributing area, tholeiitic and alkalic olivine basalt. Based on this geochemical signature it was apparent that the majority of terrigenous sediment on the reef flat originated from geologically old tholeiitic drainages. Sediment from one of five tholeiitic drainages had a distinct geochemical signature, and sediment with this signature was dispersed on the reef flat 2 km west and 150 m offshore of the contributing basin. Sediment and the anthropogenic metals Cd, Pb, and Zn were entrained in runoff from the most heavily urbanized region of the watershed. Although anthropogenic Cd and Zn had localized distributions close to shore, anthropogenic Pb was found associated with fine sediment on the westernmost part of the reef flat and 400 m offshore, illustrating how trade-wind-driven sediment transport can increase the scale of runoff impacts to nearshore communities. Our findings show that sediment geochemical signatures can provide insights about the source and dispersal of land-based runoff in shallow coastal environments. The application of such knowledge to watershed management and habitat remediation efforts can aid in the protection and restoration of runoff-impacted coastal ecosystems worldwide.

Hawaii↗
USGS2001

Statistical analysis of sand and gravel aggregate deposits of late Pleistocene Lake Bonneville, Utah

Sedimentary deposits of pluvial Lake Bonneville are an important source of sand and gravel suitable for aggregate and construction in Utah. Data on Lake Bonneville basin sand and gravel deposit thickness, volume, grain size, percent of fines, and durability were statistically analyzed to detect variations associated with geologic domains, geographic location, Lake Bonneville shorelines, and sand and gravel deposit type, and to construct quantitative deposit models. Analysis showed several trends; (1) sand and gravel in younger shorelines was slightly more durable and the deposits considerably larger in volume, (2) younger shorelines are also more likely to contain more than one genetic deposit type, (3) the volume of terrace deposits is larger than beach deposits, (4) terraces and beaches are generally thicker than spits and bars, (5) the northern part of the Bonneville Basin contains slightly more durable sand and gravel than the southern part of the basin and is more likely to contain deposits composed of more than one genetic deposit type, and (6) the Wasatch domain deposits are composed of more than one genetic deposit type more often than deposits of the Basin and Range domain. Three additional conclusions with immediate economic significance are; (1) the median sand and gravel deposit in the Wasatch domain, 360,000 m 3 (275,000 yd 3 ), is three times larger than that of the Basin and Range domain (120,000 m 3 [90,000 yd 3 ]), (2) the median deposit thickness in the Wasatch domain, 5.8 m (19.0 ft), is nearly twice that of the Basin and Range domain (3 m [10 ft]), and (3) the Wasatch domain also contains slightly larger diameter gravel. These three conclusions are significant because the trend for sand and gravel development in the Bonneville Basin is to move from the Wasatch domain to the Basin and Range domain. Smaller, thinner deposits with smaller diameter gravel will require more surface area to mine than would have been necessary in the Wasatch domain. The result is a higher cost for sand and gravel in construction projects in the Salt Lake City area, especially since the gravel must also be hauled further.

Idaho;Nevada;Utah↗
USGS2008

Statistical Stationarity of Sediment Interbed Thicknesses in a Basalt Aquifer, Idaho National Laboratory, Eastern Snake River Plain, Idaho

The statistical stationarity of distributions of sedimentary interbed thicknesses within the southwestern part of the Idaho National Laboratory (INL) was evaluated within the stratigraphic framework of Quaternary sediments and basalts at the INL site, eastern Snake River Plain, Idaho. The thicknesses of 122 sedimentary interbeds observed in 11 coreholes were documented from lithologic logs and independently inferred from natural-gamma logs. Lithologic information was grouped into composite time-stratigraphic units based on correlations with existing composite-unit stratigraphy near these holes. The assignment of lithologic units to an existing chronostratigraphy on the basis of nearby composite stratigraphic units may introduce error where correlations with nearby holes are ambiguous or the distance between holes is great, but we consider this the best technique for grouping stratigraphic information in this geologic environment at this time. Nonparametric tests of similarity were used to evaluate temporal and spatial stationarity in the distributions of sediment thickness. The following statistical tests were applied to the data: (1) the Kolmogorov-Smirnov (K-S) two-sample test to compare distribution shape, (2) the Mann-Whitney (M-W) test for similarity of two medians, (3) the Kruskal-Wallis (K-W) test for similarity of multiple medians, and (4) Levene's (L) test for the similarity of two variances. Results of these analyses corroborate previous work that concluded the thickness distributions of Quaternary sedimentary interbeds are locally stationary in space and time. The data set used in this study was relatively small, so the results presented should be considered preliminary, pending incorporation of data from more coreholes. Statistical tests also demonstrated that natural-gamma logs consistently fail to detect interbeds less than about 2-3 ft thick, although these interbeds are observable in lithologic logs. This should be taken into consideration when modeling aquifer lithology or hydraulic properties based on lithology.

Scientific Investigations Report↗
USGS1940

Geology of area between Green and Colorado rivers, Grand and San Juan Counties, Utah

The area described in this report comprises about 900 square miles of arid land lying between the Green and Colorado Rivers south of the Denver & Rio Grande Western Railroad and southwest of the Salt Valley anticline. The rocks that crop out or that have been encountered in wells drilled in the area are all sedimentary and range in age from Pennsylvanian to Upper Cretaceous. Mesozoic strata are especially well represented. Including rocks that have been cut by drilling, the maximum thickness of the stratigraphic section is about 2 miles.

Utah↗
USGS1996

Geologic Map of the Cascade Head Area, Northwestern Oregon Coast Range (Neskiwin, Nestucca Bay, Hebo, and Dolph 7.5 minute Quadrangles)

The geology of the Cascade Head area bridges the geology in the Tillamook Highlands to the north (Wells and others, 1994; 1995) with that of the Newport Embayment on the south (Snavely and others, 1976 a,b,c). The four 7.5-minute quadrangles (Neskowin, Nestucca Bay, Hebo, and Dolph) which comprise the Cascade Head area include significant stratigraphic, structural, and igneous data that are essential in unraveling the geology of the northern and central part of the Oregon Coast Range and of the adjacent continental shelf Earlier studies (Snavely and Vokes, 1949) were of a broad reconnaissance nature because of limited access in this rugged, densely forested part of the Siuslaw National Forest. Also, numerous thick sills of late middle Eocene diabase and middle Miocene basalt mask the Eocene stratigraphic relationships. Previous mapping was hampered by a lack of precise biostratigraphic data. However, recent advances in biostratigraphy and radiometric age dating and geochemistry have provided the necessary tools to decipher stratigraphic and structural relationships in the Eocene sedimentary and volcanic rock sequences (W.W. Rau, personal communication, 1978 to 1988; Bukry and Snavely, 1988). Many important stratigraphic and igneous relationships are displayed within the Casacde Head area: (1) turbidite sandstone of the middle Eocene Tyee Formation, which is widespread in the central and southern part of the Oregon Coast Range (Snavely and others, 1964), was not deposited in the western part of the Cascade Head, and is of limited extent north of the map area (Wells and others, 1994); (2) the late middle Eocene Yamhill Formation, which crops out along the west and east flank of the Oregon Coast Range, overlaps older strata and overlies an erosional unconformity on the lower Eocene Siletz River Volcanics (Snavely and others, 1990; 1991); (3) thick sills of late middle Eocene diabase (43 Ma) are widespread in the Cascade Head area and also form much of the eastern flank of the Tillamook Highlands (Wells and others, 1994), but are rare south of the map area; (4) Cascade Head is the northernmost eruptive center of late Eocene alkalic basalts--85 km north of the eruptive center of correlative alkalic flows of the Yachats Basalt in the Newport Embayment (Snavely and Vokes, 1949; Snavely and others, 1990; Barnes and Barnes, 1992; Davis and others, 1995); (5) early Oligocene (33 Ma) sills and dikes of nepheline syenite and camptonite present in the Newport Embayment (Snavely and Wagner, 1961) are not found in the Cascade Head area; (6) extensive middle Oligocene (30 Ma) granophyric gabbro sills that are widespread in the central part of the Oregon Coast Range (Snavely and Wagner, 1961; MacLeod, 1969) are not present in the Cascade Head area. The Cascade Head area is the last segment of the Oregon Coast to receive detailed geologic mapping. Increased logging operations in the 1970's and 1980's created numerous new roadcut exposures and access to exposures in stream beds. More importantly, microfossil biostratigraphic control, available since 1970, based upon foraminifer determinations by W.W. Rau and nannofossil determinations by David Bukry provided critical information on stratigraphic succession as well as on depositional environments of the deep water (bathyal) siltstone units present in much of the Cascade Head area. These paleontologic data also permitted correlations with other sedimentary sequences mapped in the Newport Embayment and in the Tillamook Highlands as well as in western Washington. New 7.5-minute topographic maps and aerial photographs which became available in the late 1980's provided detailed topography which can be related to the distribution of thick sills and broad landslide areas, as well as a precise geographic relationship of geologic observations in this densely forested and brush-covered terrain. New geographic information systems (GIS) technology has produced a digitized color map of the Cascade Head area that combines the four 7.5-minute quadrangles that previously were open-filed as separate black and white 7.5-minute quadrangles (Snavely and others, 1990; 1990a; 1991; 1993). The tectonic framework and stratigraphic architecture presented on the map of the Cascade Head area was obtained by classic geologic field methods. This information could have been obtained only through detailed observation and sampling along stream beds, road cuts, and outcrops. Remote sensing techniques were of minor help in unraveling the geology in this poorly exposed and complex terrain, a terrain that characterizes much of the Oregon and Washington Coast Ranges.

Oregon↗
USGS1964

Deep geothermal brine near Salton Sea, California

A well drilled for geothermal power near Salton Sea in Imperial Valley, Calif., is 5,232 feet deep; it is the deepest well in the world (1962) in a high-temperature hot spring area. In the lower half of the hole temperatures are too high to measure with available equipment, but are at loast 270°C, and may be as much as 370°C. For comparison, maximum temperature heretofore reported at depth (1962) for hot spring areas is 295°C. The well taps a very saline brine of Na-Ca-K-Cl type (about 185,000 ppm Cl) with exceptionally high potassium, and with the highest content of minor alkali elements known for natural waters; Fe, Mn, Zn, Pb, Cu, Ag, and some other metals are also exceptionally high. This brine may be connate, but present evidence favors a source in the magma chamber at depth that supplied late Quaternary rhyolite domes of the area. If the latter is correct, the brine is an undiluted magmatic water that is residual from the separation of a more volatile phase high in CO 2 , H 2 S, and with some alkali halides. Elsewhere, the hypothesized volatile phase may account for near-surface hot spring activity of most thermal areas of volcanic association. The residual brine of high salinity may ordinarily remain relatively deep in the volcanic systems because of high specific gravity and low content of volatiles, seldom appearing at the surface except in a greatly diluted form. The hot springs of Arima, Japan, may be a rare example of this type of magmatic water discharging at the surface in moderate concentration (Cl as much as 42,000 ppm). Independent evidence from fluid inclusions in minerals of high-temperature base-metal deposits also favors the existence of magmatic water high in Na, Ca, and Cl, and low in CO 2 and other volatile components. During a three-month production test several tons of material precipitated in the horizontal discharge pipe from the well. Amorphous silica with iron and manganese, and bornite are the dominant recognized components. This material contains the astonishingly high contents of about 20 percent copper, 2 percent silver, and notable sulfur, arsenic, bismuth, lead, antimony, and some other minor elements. Total quantities of all elements in the original whole brine are not yet known, but calculated amounts corresponding to 1 to 3 ppm of copper and 0.1 to 0.3 ppm of silver were precipitated from the brine to form the pipe deposits. The brine, therefore, may be man’s first sample of an « active » ore solution. Equally fascinating to many geologists is the possibility that in the lower part of the hole temperatures are so high and pressures are sufficient for young sedimentary rocks to be undergoing transformation into rocks with mineral assemblages of the greenschist facies of metamorphism. Drill cores from 4,400 to 5,000 feet in depth contain chlorite, albite, K-feldspar, epidote, mica, and quartz, with some indication of increase in metamorphic grade downward. Regional geological and geophysical studies favor a depth of about 20,000 feet to pre-Tertiary basement rocks in the general area. A shallow basement or local upfaulting of old metamorphic rocks are not likely possibilities for the thermal area.

California↗
USGS1984

Origin of epigenetic calcite in coal from Antarctica and Ohio based on isotope compositions of oxygen, carbon and strontium

Isotopic compositions of oxygen, carbon and strontium of calcite cleats in coal seams of southern Victoria Land, Antarctica, and Tuscarawas County, Ohio, contain a record of the conditions a the time of their formation. The Antarctic calcites (?? 18O(SMOW) = +9.14 to +11.82%0) were deposited from waters enriched in 16O whose isotopic composition was consistent with that of meteoric precipitation at low temperature and high latitude. The carbon of the calcite cleats (?? 13C(PDB) = -15.6 to -16.9%0) was derived in part from the coal (?? 13C(PDB) = -23.5 to -26.7%0) as carbon dioxide and by oxidation of methane or other hydrocarbon gases. The strontium ( 87Sr 86Sr = 0.71318-0.72392) originated primarily from altered feldspar grains in the sandstones of the Beacon Supergroup. Calcite cleats in the Kittaning No. 6 coal seam of Ohio (?? 18O(SMOW) = +26.04 to +27.79%0) were deposited from waters that had previously exchanged oxygen, possibly with marine carbonate at depth. The carbon (?? 13C(PDB) = 0.9 to +2.4%0) is enriched in 13C even though that cleats were deposited in coal that is highly enriched in 12C and apparently originated from marine carbonates. Strontium in the cleats ( Sr 87 0.71182-0.71260) is not of marine origin but contains varying amounts of radiogenic 87Sr presumably derived from detrital Rb-bearing minerals in the adjacent sedimentary rocks. The results of this study suggest that calcite cleats in coal of southern Victoria Land, Antarctica, were deposited after the start of glaciation in Cenozoic time and that those in Ohio precipitated from formation waters derived from the underlying marine carbonate rocks, probably in the recent geologic past. ?? 1984.

Chemical Geology↗
USGS1979

Late Cenozoic uplift of the southwestern Colorado Plateau and adjacent lower Colorado River region

Rocks deposited near sea level under marine, estuarine, and lacustrine conditions, and located along the course of the lower Colorado River from the mouth of the Grand Canyon as far as the Mexican border, have been displaced to present positions as high as 880 m a.s.l. and as low as 1600 m b.s.l. The rocks include the marine and estuarine Bouse Formation and the lacustrine or marine Hualapai Limestone Member of the Muddy Creek Formation. A profile joining spot elevations that represent the highest erosional remnants of these rocks preserved at any one locality gives an approximation (in most cases a minimum value) for the uplift or downdropping of the region relative to sea level since about 5.5 m.y. ago, the K/Ar age of the most widespread and critical unit. The profile shows that most of the lower Colorado region has risen at least 550 m through broad and rather uniform upwarping and at an average rate of about 100 m/m.y. In addition to these 550 m, the nearby Colorado Plateau has risen by discrete movement along Wheeler fault, which is parallel to and about 8 km west of the plateau's edge, to a total uplift of at least 880 m, at a rate that may be as high as 160 m/m.y. Before warping and faulting, the top of the plateau was about 1100 m above the fill of adjacent basins; the top of this fill probably was at or a little below sea level. The profile shows two major south-facing rises in slope. The bigger one, near Yuma, occurs where the profile intersects the northwest-trending San Andreas-Salton trough system of faults; it is interpreted as rifting resulting from transcurrent movement along the faults. At the Mexican border, the base of the Bouse Formation is 1600 m b.s.l., which corresponds to a rate of subsidence since the beginning of Bouse time that may be as high as 290 m/.m.y. The top of the Bouse is at 1000 m b.s.l., corresponding to a rate of subsidence of about 180 m/m.y. In this area, the “older marine sedimentary rocks” of Olmsted et al., (1973) occur as much as 2100 m b.s.l. These rocks are evidence for marine invasion and deformation that predate the Bouse Formation. The second rise in slope occurs at the intersection with a regional northwest-trending lineament that separates widely different geologic terranes and is associated with extensive Miocene volcanism. This lineament may represent an old transform fault similar in geologic function to the present San Andreas system.

Arizona, California, Colorado, Nevada↗
USGS2017

Mantle and crustal gases of the Colorado Plateau: Geochemistry, sources, and migration pathways

The Colorado Plateau hosts several large accumulations of naturally occurring, non-hydrocarbon gases, including CO 2 , N 2 , and the noble gases, making it a good field location to study the fluxes of these gases within the crust and to the atmosphere. In this study, we present a compilation of 1252 published gas-composition measurements. The data reveal at least three natural gas associations in the field area, which are dominated by hydrocarbons, CO 2, and N 2 + He + Ar, respectively. Most gas accumulations of the region exhibit compositions that are intermediate between the three end members. The first non-hydrocarbon gas association is characterized by very high-purity CO 2 , in excess of 75 mol% (hereafter, %). Many of these high-purity CO 2 fields have recently been well described and interpreted as magmatic in origin. The second non-hydrocarbon gas association is less well described on the Colorado Plateau. It exhibits He concentrations on the order of 1–10%, and centered log ratio biplots show that He occurs proportionally to both N 2 and Ar. Overall ratios of N 2 to He to Ar are ≈100:10:1 and correlation in concentrations of these gases suggests that they have been sourced from the same reservoir and/or by a common process. To complement the analysis of the gas-composition data, stable isotope and noble-gas isotope measurements are compiled or newly reported from 11 representative fields (previously published data from 4 fields and new data from 7 fields). Gas sampled from the Harley Dome gas field in Utah contains nearly pure N 2 + He + Ar. The various compositional and stable and noble gas isotopic data for this gas indicate that noble gas molecule/isotope ratios are near crustal radiogenic production values and also suggest a crustal N 2 source. Across the field area, most of the high-purity N 2 + He + Ar gas accumulations are associated with the mapped surface trace of structures or sutures in the Precambrian basement and are often accumulated in lower parts of the overlying Phanerozoic sedimentary cover. The high-purity gas association mostly occurs in areas interior to the plateau that are characterized by a narrow range of elevated, moderate heat flow values (53–74 mW/m 2 ) in the ancient (1.8–1.6 Ga) basement terranes of the region. Collectively, the geochemical and geological data suggest that (1) the N 2 + He + Ar gas association is sourced from a crustal reservoir, (2) the gas association migrates preferentially along structures in the Precambrian basement, and (3) the sourcing process relates to heating of the crust. Prospecting for noble-gas accumulations may target areas with elevated Cenozoic heat flow, ancient crust, and deep crustal structures that focus gas migration. High-purity CO 2 gas may also migrate through regional basement structures, however, there is not always a clear spatial association. Rather, CO 2 accumulations are more clearly associated with zones of high heat flow (>63 mW/m 2 ) that sit above hot upper mantle and are proximal to Cenozoic volcanic rocksnear the plateau margins. These observations are consistent with previous interpretations of a magmatic gas source, which were based on geochemical measurements.

Colorado Plateau↗
USGS2026

Ground-motion simulations for the 2024 Mw 4.8 Tewksbury, New Jersey, earthquake

Ground-motion simulations of notable earthquakes in the central and eastern United States are limited and typically assume one-dimensional (1D) Earth structure. In this study, we use a three-dimensional (3D) seismic velocity model to better constrain the depth and focal mechanism of the April 5th, 2024, moment magnitude 4.8 Tewksbury earthquake and investigate the spatial variability of earthquake ground motions and the effects of nearby sedimentary basins. We perform earthquake ground-motion simulations up to 0.5 Hz using the 3D spectral-element wave-propagation solver SPECFEM3D over a region 280-km wide by 260-km long by 77-km deep. Topography and subsurface geophysical structure are assigned using the U.S. Geological Survey National Crustal Model with a minimum shear-wave velocity of 200 m/s. We use earthquake time series from 13 broadband seismic stations in the region that have a uniform azimuthal distribution and epicentral distances ranging from 76 to 131 km to compare with synthetics and explore the effects of 1D versus 3D seismic structure on focal mechanism and depth solutions. Ground-motion intensity metrics are also presented relative to the NGA-East ground-motion models (GMMs) currently used in seismic hazard assessments for the region. We find that the 3D model, which reveals a wide spatial variability of period-dependent ground motions, yields better predictions of earthquake ground motions relative to the 1D model and the NGA-East ergodic ground-motion model, with 76 percent reduction of residual variance in observed ground motions averaged over 3-, 5-, 7-, and 10-second periods. Use of the 3D model to solve for a focal mechanism yields a shallower focal depth at 4 km and a shallower east-dipping focal plane relative to the U.S. Geological Survey regional moment tensor and Global Centroid Moment Tensor. Our study demonstrates that use of 3D seismic velocity models can improve estimates of earthquake focal mechanisms, ground motions, and seismic hazard.

New Jersey↗
USGS2002

Magnetic susceptibilities measured on rocks of the upper Cook Inlet, Alaska

We have measured magnetic susceptibility in the field on most of the geologic rock formations exposed in the upper Cook Inlet near Anchorage and Kenai, Alaska. Measured susceptibilities range from less than our detection limit of 0.01 x 10-3 (SI) to greater than 100 x 10-3 (SI). As expected, mafic igneous rocks have the highest susceptibilities and some sedimentary rocks the lowest. Rocks of the Tertiary Sterling Formation yielded some moderate to high susceptibility values. Although we do not have detailed information on the magnetic mineralogy of the rocks measured here, the higher susceptibilities are sufficient to explain the magnitudes of some short-wavelength aeromagnetic anomalies observed on recent surveys of the upper Cook Inlet.

Alaska↗
USGS2006

delta 15N and non-carbonate delta 13C values for two petroleum source rock reference materials and a marine sediment reference material

Samples of United States Geological Survey (USGS) Certified Reference Materials USGS Devonian Ohio Shale (SDO-1), and USGS Eocene Green River Shale (SGR-1), and National Research Council Canada (NRCC) Certified Marine Sediment Reference Material (PACS-2), were sent for analysis to four separate analytical laboratories as blind controls for organic rich sedimentary rock samples being analyzed from the Red Dog mine area in Alaska. The samples were analyzed for stable isotopes of carbon (delta13Cncc) and nitrogen (delta15N), percent non-carbonate carbon (Wt % Cncc) and percent nitrogen (Wt % N). SDO-1, collected from the Huron Member of the Ohio Shale, near Morehead, Kentucky, and SGR-1, collected from the Mahogany zone of the Green River Formation are petroleum source rocks used as reference materials for chemical analyses of sedimentary rocks. PACS-2 is modern marine sediment collected from the Esquimalt, British Columbia harbor. The results presented in this study are, with the exceptions noted below, the first published for these reference materials. There are published information values for the elemental concentrations of 'organic' carbon (Wt % Corg measured range is 8.98 - 10.4) and nitrogen (Wt % Ntot 0.347 with SD 0.043) only for SDO-1. The suggested values presented here should be considered 'information values' as defined by the NRCC Institute for National Measurement Reference Materials and should be useful for the analysis of 13C, 15N, C and N in organic material in sedimentary rocks.

Open-File Report↗
USGS2007

Measurements of slope current and environmental geochemistry near the western boundary of the Gulf of the Farallones National Marine Sanctuary

For nearly a decade, dredged material from San Francisco Bay has been deposited at the U.S. Environmental Protection Agency (EPA) Region IX designated disposal site on the continental slope west of the Farallon Islands. Over the past several years, annual disposal volumes have ranged from 136,170 m3 (61 barge loads) to 2,407,600 m3 (1,173 barge loads) (Ota, personal communication, 2000). The EPA has conducted extensive studies to evaluate the fate and effects of the disposed material (Abdelrhman, 1992; Tetra-Tech, 1992; SAIC, 1992). The EPA has also maintained a long-term monitoring program to collect hydrodynamic, sedimentary, chemical, and biological data that are used to determine whether the dredged material adversely affects the ecology of adjacent water bodies and whether it moves from the disposal site, especially into the Gulf of the Farallones National Marine Sanctuary. As part of this monitoring program, the U.S. Geological Survey (USGS) Coastal and Marine Geology Program (CMGP) deployed arrays of instruments on three moorings near the EPA disposal site from November 1997 to November 1998. This report describes the results and findings of this field monitoring experiment.

California↗
USGS1978

Correlations between seismic wave velocities and physical properties of near-surface geologic materials in the southern San Francisco Bay region, California

To identify geologic units with distinctly different seismic responses for the purposes of seismic zonation, compressional and shear wave velocities have been measured in boreholes at 59 sites in the San Francisco Bay region in a wide range of near-surface (0-30m) geologic materials. Several physical parameters, which can be readily determined in the field, were found to correlate with the shear wave velocities and were used to define seismically distinct groups. For the unconsolidated to semiconsolidated sediments, texture, standard penetration resistance and depth were used to define eight seismically distinct groups. For the bedrock materials, fracture spacing and hardness were used to differentiate ten distinct categories. The correlation obtained between shear wave velocity and the physical parameters were used to regroup the map units defined for the San Francisco Bay region into seismically distinct units. The map units for the younger unconsolidated sediments can be really differentiated seismically. In contrast, the older semiconsolidated sedimentary deposits and bedrock units, which have experienced significant variations in post-depositial changes, show wider and overlapping velocity ranges. The map units for the sedimentary deposits have been regrouped into eight seismically distinct geotechnical units. The bedrock map units have been broadly regrouped into five distinct categories. Compressional wave velocities were not found to be well correlated with the physical parameters dependent on the soil or rock structure. For materials above the water table, the wide velocity variations found for each geotechnical group can be attributed to differences in degree of saturation. The strong correlations observed between shear wave velocity and other readily determine physical properties suggest that geologic maps which incorporate these parameters are most useful for seismic zonation.

California↗
USGS1953

Rosamond Prospect, Kern county, California

Small quantities of autunite and gummite (?) occur in tuffaceous sedimentary rocks of the Rosamond formation of Miocene age at the Rosamond prospect. The property is about 10 miles south of Mojave, Jern County, California, in the western Mojave Desert. Examination of the propert in January 1952, by George W. Walker and Luther H. Baumgardner of the U.S. Geological Survey, indicates the the autunite occurs principally as coating on fracture and joint surfaces and, to a less extent, as disseminations in the tuffaceous rocks adjacent to faults. A waxy, reddish-brown, radioactive mineral, here called gummite (?), is found in small quantities on slickensided fault surfaces associated with iron oxides and chlorite (?). The uranium minerals are erratically distributed over an area of about 15 acres. Assay of 12 samples indicate a uranium content ranging from 0.002 to 0.59 percent and an average content of slightly less than 0.08 percent uranium.

California↗
USGS1973

Ground water in the Eugene-Springfield area, southern Willamette Valley, Oregon

The cities of Eugene and Springfield and their outlying suburban and rural districts constitute an area of rapid population growth where progressively greater volumes of ground water are being required for irrigation and industrial and public supplies. The area is also one of diverse geologic and hydrologic conditions. As used in this report, the Eugene-Springfield area covers about 450 square miles and includes a part of the lower foothills of the Coast and Cascade Ranges and a strip of the main valley plain of the southern Willamette Valley. Volcanic and sedimentary rock units exposed in the foothills range in age from Eocene to Miocene. In the main valley plain the older units are overlain by Pleistocene and Holocene alluvial deposits. Marine-deposited sandstone, siltstone, shale, and mudstone of the older sedimentary units are fine grained and poorly permeable and yield water slowly to wells. The volcanic rocks, primarily of dacitic and andesitic composition, yield small quantities of water that are generally adequate only for domestic use. The alluvial deposits (sand and gravel) of the valley plain (central lowland) contain the most productive aquifers in the area and are considered to be the only ground-water reservoir for which large-scale development of ground-water supplies is feasible. Aquifers in the area are recharged principally by direct infiltration of precipitation. Most of the precipitation, which averages about 4C inches per year, occurs during late autumn and winter. Minimum recharge by infiltration of precipitation to the alluvial aquifers beneath the valley plain is estimated to be about 100,000 acre-feet. Ground water is discharged naturally from the central lowland by seepage and spring flow to small streams, by subsurface outflow to adjacent areas, and by evapotranspiration. Storage capacity of the central lowland in the Eugene-Springfield area is estimated to be about 2.1 million acre-feet in the zone 10-150 feet below land surface. The quantity of ground water available annually from this area is far greater than the 23,000 acre-feet pumped for all uses in 1968. This pumpage was about 23 percent of the perennial yield (100,000 acre-ft), and about 77,000 acre-feet of water was left available for additional withdrawal. If annual withdrawals of water were increased to 100,000 acre-feet per year, the levels in the ground-water reservoir would be lowered. Once new equilibriums are established, increased withdrawals could be accommodated without progressive losses in aquifer storage or excessive losses in flow of the larger streams. Ground water from the alluvial deposits of the valley plain is chemically suitable for irrigation and other uses, as is most of the water obtained from perched-water bodies in the sedimentary and volcanic rocks. However, the mineral content of water from the older sedimentary rocks, particularly from deeper producing zones, is greater than the mineral content of water from the alluvial deposits. Locally, some of the water from the older rocks is too saline for most uses. Increased use of ground water may result in certain problems pertaining to waste-disposal practices, local overdraft of aquifers, well interference, and well construction. Present data are adequate to evaluate some of the factors relating to foreseeable problems but allow only tentative conclusions to be drawn about other factors, which include local direction of flow, rate of ground-water movement, and areas of possible ground-water contamination. Additional information obtained through systematic study will be needed to deal with these problems.

Oregon↗