Geology Reports⌕ Search

SEARCH · Geology Reports

Results for “Interpretation”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,099 records · Page 61Linked to original sources

An empirical test of maximum depositional age through paired LA-ICP-MS and CA-ID-TIMS detrital zircon analysis with implications for the “Nevadan orogeny” in the Sierra Nevada foothills, California, U.S.A.

The interpretation of maximum depositional age (MDA) from U-Pb detrital zircon data acquired via laser ablation–inductively coupled plasma–mass spectrometry (LA-ICP-MS) or secondary ion mass spectrometry (SIMS) is now routine; however, to date only a few studies have presented tests of such MDAs by subsequently analyzing a subset of the same detrital zircon grains with the more accurate and precise chemical abrasion–isotope dilution–thermal ionization mass spectrometry (CA-ID-TIMS) method. We first generated LA-ICP-MS dates and MDAs from three turbidite sandstone samples of the Late Jurassic Mariposa Formation (Sierra Nevada foothills, California) containing large proportions of young detrital zircon grains (at the time of sediment deposition). We then removed 4–5 of the apparent youngest grains from the epoxy mount and analyzed them with CA-ID-TIMS. Despite a lack of low Th/U or high U (ppm) characteristics that might indicate U-Pb system disturbance, all LA-ICP-MS dates are younger than corresponding CA-ID-TIMS dates, on the same grain, by up to 11.8 m.y. when considered as point estimates. Only two out of 13 paired analyses overlap within error at 95% confidence. We interpret MDAs from our CA-ID-TIMS dates to be the youngest CA-ID-TIMS dates (YTDs). LA-ICP-MS MDAs based on fewer dates from the young tail of the youngest date distribution perform the worst (i.e., furthest from CA-ID-TIMS MDAs), whereas LA-ICP-MS MDA methods that incorporate more dates from the youngest date distribution perform better; the best performing method in all cases is the maximum likelihood algorithm–minimum. The performance of tested LA-ICP-MS MDA methods is improved by removing statistical outlier dates and by removing visually young “outlier” dates that drift away from the primary distribution of young dates. Our paired LA-ICP-MS/CA-ID-TIMS MDA workflow shows that the accuracy of MDA can be significantly improved by conducting CA-ID-TIMS on as few as four grains from a sample. The combination of our new CA-ID-TIMS MDAs with published CA-ID-TIMS analyses and petrochronology on the nearby Guadalupe igneous complex provides sub-million-year resolution of contemporaneous igneous and sedimentary systems during deformation and clarifies the timing of regional deformation that defines the local “Nevadan orogeny.” Rocks in the upper plate of the Bear Mountains fault zone have a CA-ID-TIMS YTD MDA of 151.71 ± 0.23 Ma, and rocks of the lower plate have a CA-ID-TIMS YTD MDA of 149.92 ± 0.11 Ma. These new MDAs, in conjunction with the observation of fabric-bearing Mariposa Formation xenoliths in the ca. 149.65 ± 0.10 Ma Guadalupe igneous complex, suggest that rocks in the upper plate of the Bear Mountains fault zone represent a slightly older (~2 m.y.) section of Mariposa Formation that was deformed and intruded prior to being juxtaposed against, and further deformed with, a slightly younger lower-plate section of Mariposa Formation in actively deforming, fault-bounded basins. Our observations are not consistent with traditional models that require that sedimentation of the Mariposa Formation ended by ca. 155 Ma. Instead, we interpret our data to be consistent with other evidence for a continuum of deformation in Late Jurassic to Early Cretaceous time and document that the regional “slatey cleavage” observed in the greater Mariposa Formation and used to define the “Nevadan orogeny” in our study area is largely younger than 149.92 ± 0.11 Ma.

California↗

Sedimentology and hydrodynamic implications of a coarse-grained hurricane sequence in a carbonate reef setting

Storms and associated surges are major coast-shaping processes. Nevertheless, no typical sequences for storm surge deposits in different coastal settings have been established. This study interprets a coarse-grained hurricane ridge deposit on the island of Bonaire, Netherlands Antilles. The sequence was deposited during Hurricane Lenny in November 1999. Insight is gained into the hydrodynamics of surge flow by interpreting textural trends, particle imbrication, and deposit geometry. Vertical textural variations, caused by time-dependent hydrodynamic changes, were used to subdivide the deposit into depositional units that correspond to different stages of the surge, such as setup, peak, and return flow. Particle size and imbrication trends and geometry of the units reflect landward bed-load transport of components during the setup, a nondirectional flow with sediment falling out of suspension during the peak, and a seaward bedload transport during the return flow. Formation of a ridge during setup affected the texture of the return flow unit. Changing angles of imbrication reflect alternating flow velocities during each phase. Normal grading during setup and inverse grading during return flow are caused by decelerating and accelerating flow, respectively. Hence, the interpreted deposit seems to represent the first described complete hurricane surge sequence from a carbonate environment. ?? 2009 Geological Society of America.

Geology↗

Geometry of the neoproterozoic and paleozoic rift margin of western Laurentia: Implications for mineral deposit settings

The U.S. and Canadian Cordilleran miogeocline evolved during several phases of Cryogenian-Devonian intracontinental rifting that formed the western mangin of Laurentia. Recent field and dating studies across central Idaho and northern Nevada result in identification of two segments of the rift margin. Resulting interpretations of rift geometry in the northern U.S. Cordillera are compatible with interpretations of northwest- striking asymmetric extensional segments subdivided by northeast-striking transform and transfer segments. The new interpretation permits integration of miogeoclinal segments along the length of the western North American Cordillera. For the U.S. Cordillera, miogeoclinal segments include the St. Mary-Moyie transform, eastern Washington- eastern Idaho upper-plate margin, Snake River transfer, Nevada-Utah lower-plate margin, and Mina transfer. The rift is orthogonal to most older basement domains, but the location of the transform-transfer zones suggests control of them by basement domain boundaries. The zigzag geometry of reentrants and promontories along the rift is paralleled by salients and recesses in younger thrust belts and by segmentation of younger extensional domains. Likewise, transform transfer zones localized subsequent transcurrent structures and igneous activity. Sediment-hosted mineral deposits trace the same zigzag geometry along the margin. Sedimentary exhalative (sedex) Zn-Pb-Ag ??Au and barite mineral deposits formed in continental-slope rocks during the Late Devonian-Mississippian and to a lesser degree, during the Cambrian-Early Ordovician. Such deposits formed during episodes of renewed extension along miogeoclinal segments. Carbonate-hosted Mississippi Valley- type (MVT) Zn-Pb deposits formed in structurally reactivated continental shelf rocks during the Late Devonian-Mississippian and Mesozoic due to reactivation of preexisting structures. The distribution and abundance of sedex and MVT deposits are controlled by the polarity and kinematics of the rift segment. Locally, discrete mineral belts parallel secondary structures such as rotated crustal blocks at depth that produced sedimentary subbasins and conduits for hydrothermal fluids. Where the miogeocline was overprinted by Mesozoic and Cenozoic deformation and magmatism, igneous rock-related mineral deposits are common. ??2008 Geological Society of America.

Geosphere↗

Detrital zircon U-Pb provenance of the Colorado River: A 5 m.y. record of incision into cover strata overlying the Colorado Plateau and adjacent regions

New detrital zircon U-Pb age distributions from 49 late Cenozoic sandstones and Holocene sands (49 samples, n = 3922) record the arrival of extra-regional early Pliocene Colorado River sediment at Grand Wash (western USA) and downstream locations ca. 5.3 Ma and the subsequent evolution of the river’s provenance signature. We define reference age distributions for the early Pliocene Colorado River (n = 559) and Holocene Colorado River (n = 601). The early Pliocene river is distinguished from the Holocene river by (1) a higher proportion of Yavapai-Mazatzal zircon derived from Rocky Mountain basement uplifts relative to Grenville zircon from Mesozoic supra crustal rocks, and (2) distinctive (∼6%) late Eocene–Oligocene (40–23 Ma) zircon reworked from Cenozoic basins and volcanic fields in the southern Rocky Mountains and/or the eastern Green River catchment. Geologic relationships and interpretation of 135 published detrital zircon age distributions throughout the Colorado River catchment provide the interpretative basis for modeling evolution of the provenance signature. Mixture modeling based upon a modified formulation of the Kolmogorov-Smirnov statistic indicate a subtle yet robust change in Colorado River provenance signature over the past 5 m.y. During this interval the contribution from Cenozoic strata decreased from ∼75% to 50% while pre-Cretaceous strata increased from ∼25% to 50%. We interpret this change to reflect progressive erosional incision into plateau cover strata. Our finding is consistent with geologic and thermochronologic studies that indicate that maximum post–10 Ma erosion of the Colorado River catchment was concentrated across the eastern Utah–western Colorado region.

Geosphere↗

Provenance and detrital zircon geochronologic evolution of lower Brookian foreland basin deposits of the western Brooks Range, Alaska, and implications for early Brookian tectonism

The Upper Jurassic and Lower Cretaceous part of the Brookian sequence of northern Alaska consists of syntectonic deposits shed from the north-directed, early Brookian orogenic belt. We employ sandstone petrography, detrital zircon U-Pb age analysis, and zircon fission-track double-dating methods to investigate these deposits in a succession of thin regional thrust sheets in the western Brooks Range and in the adjacent Colville foreland basin to determine sediment provenance, sedimentary dispersal patterns, and to reconstruct the evolution of the Brookian orogen. The oldest and structurally highest deposits are allochthonous Upper Jurassic volcanic arc–derived sandstones that rest on accreted ophiolitic and/or subduction assemblage mafic igneous rocks. These strata contain a nearly unimodal Late Jurassic zircon population and are interpreted to be a fragment of a forearc basin that was emplaced onto the Brooks Range during arc-continent collision. Synorogenic deposits found at structurally lower levels contain decreasing amounts of ophiolite and arc debris, Jurassic zircons, and increasing amounts of continentally derived sedimentary detritus accompanied by broadly distributed late Paleozoic and Triassic (359–200 Ma), early Paleozoic (542–359 Ma), and Paleoproterozoic (2000–1750 Ma) zircon populations. The zircon populations display fission-track evidence of cooling during the Brookian event and evidence of an earlier episode of cooling in the late Paleozoic and Triassic. Surprisingly, there is little evidence for erosion of the continental basement of Arctic Alaska, its Paleozoic sedimentary cover, or its hinterland metamorphic rocks in early foreland basin strata at any structural and/or stratigraphic level in the western Brooks Range. Detritus from exhumation of these sources did not arrive in the foreland basin until the middle or late Albian in the central part of the Colville Basin. These observations indicate that two primary provenance areas provided detritus to the early Brookian foreland basin of the western Brooks Range: (1) local sources in the oceanic Angayucham terrane, which forms the upper plate of the orogen, and (2) a sedimentary source region outside of northern Alaska. Pre-Jurassic zircons and continental grain types suggest the latter detritus was derived from a thick succession of Triassic turbidites in the Russian Far East that were originally shed from source areas in the Uralian-Taimyr orogen and deposited in the South Anyui Ocean, interpreted here as an early Mesozoic remnant basin. Structural thickening and northward emplacement onto the continental margin of Chukotka during the Brookian structural event are proposed to have led to development of a highland source area located in eastern Chukotka, Wrangel Island, and Herald Arch region. The abundance of detritus from this source area in most of the samples argues that the Colville Basin and ancestral foreland basins were supplied by longitudinal sediment dispersal systems that extended eastward along the Brooks Range orogen and were tectonically recycled into the active foredeep as the thrust front propagated toward the foreland. Movement of clastic sedimentary material from eastern Chukotka, Wrangel Island, and Herald Arch into Brookian foreland basins in northern Alaska confirms the interpretations of previous workers that the Brookian deformational belt extends into the Russian Far East and demonstrates that the Arctic Alaska–Chukotka microplate was a unified geologic entity by the Early Cretaceous.

Alaska↗

A shifting rift—Geophysical insights into the evolution of Rio Grande rift margins and the Embudo transfer zone near Taos, New Mexico

We present a detailed example of how a subbasin develops adjacent to a transfer zone in the Rio Grande rift. The Embudo transfer zone in the Rio Grande rift is considered one of the classic examples and has been used as the inspiration for several theoretical models. Despite this attention, the history of its development into a major rift structure is poorly known along its northern extent near Taos, New Mexico. Geologic evidence for all but its young rift history is concealed under Quaternary cover. We focus on understanding the pre-Quaternary evidence that is in the subsurface by integrating diverse pieces of geologic and geophysical information. As a result, we present a substantively new understanding of the tectonic configuration and evolution of the northern extent of the Embudo fault and its adjacent subbasin. We integrate geophysical, borehole, and geologic information to interpret the subsurface configuration of the rift margins formed by the Embudo and Sangre de Cristo faults and the geometry of the subbasin within the Taos embayment. Key features interpreted include (1) an imperfect D-shaped subbasin that slopes to the east and southeast, with the deepest point ∼2 km below the valley floor located northwest of Taos at ∼36° 26′N latitude and 105° 37′W longitude; (2) a concealed Embudo fault system that extends as much as 7 km wider than is mapped at the surface, wherein fault strands disrupt or truncate flows of Pliocene Servilleta Basalt and step down into the subbasin with a minimum of 1.8 km of vertical displacement; and (3) a similar, wider than expected (5–7 km) zone of stepped, west-down normal faults associated with the Sangre de Cristo range front fault. From the geophysical interpretations and subsurface models, we infer relations between faulting and flows of Pliocene Servilleta Basalt and older, buried basaltic rocks that, combined with geologic mapping, suggest a revised rift history involving shifts in the locus of fault activity as the Taos subbasin developed. We speculate that faults related to north-striking grabens at the end of Laramide time formed the first west-down master faults. The Embudo fault may have initiated in early Miocene southwest of the Taos region. Normal-oblique slip on these early fault strands likely transitioned in space and time to dominantly left-lateral slip as the Embudo fault propagated to the northeast. During and shortly after eruption of Servilleta Basalt, proto-Embudo fault strands were active along and parallel to the modern, NE-aligned Rio Pueblo de Taos, ∼4–7 km basinward of the modern, mapped Embudo fault zone. Faults along the northeastern subbasin margin had northwest strikes for most of the period of subbasin formation and were located ∼5–7 km basinward of the modern Sangre de Cristo fault. The locus of fault activity shifted to more northerly striking faults within 2 km of the modern range front sometime after Servilleta volcanism had ceased. The northerly faults may have linked with the northeasterly proto-Embudo faults at this time, concurrent with the development of N-striking Los Cordovas normal faults within the interior of the subbasin. By middle Pleistocene(?) time, the Los Cordovas faults had become inactive, and the linked Embudo–Sangre de Cristo fault system migrated to the south, to the modern range front.

New Mexico↗

Recognition and significance of Late Devonian fluvial, estuarine, and mixed siliciclastic-carbonate nearshore marine environments in the San Juan Mountains (southwestern Colorado, U.S.A.): Multiple incised valleys backfilled by lowstand and transgressive system tracts

The Upper Devonian Ignacio Formation (as stratigraphically revised) comprises a transgressive, tide-dominated estuarine depositional system in the San Juan Mountains (Colorado, USA). The unit backfills at least three bedrock paleovalleys (10–30 km wide and ≥42 m deep) with a consistent stratigraphy of tidally influenced fluvial, bayhead-delta, central estuarine-basin, mixed tidal-flat, and estuarine-mouth tidal sandbar deposits. Paleovalleys were oriented northwest while longshore transport was to the north. The deposits represent Upper Devonian lowstand and transgressive systems tracts. The overlying Upper Devonian Elbert Formation (upper member) consists of geographically extensive tidal-flat deposits and is interpreted as mixed siliciclastic-carbonate bay-fill facies that represents an early highstand systems tract. Stratigraphic revision of the Ignacio Formation includes reassigning the basal conglomerate to the East Lime Creek Conglomerate, recognizing an unconformity separating these two units, and incorporating strata previously mapped as the McCracken Sandstone Member (Elbert Formation) into the Ignacio Formation. The Ignacio Formation was previously interpreted as Cambrian, but evidence that it is Devonian includes reexamined fossil data and detrital zircon U-Pb geochronology. The Ignacio Formation has a stratigraphic trend of detrital zircon ages shifting from a single ca. 1.7 Ga age peak to bimodal ca. 1.4 Ga and ca. 1.7 Ga age peaks, which represents local source-area unroofing history. Specifically, the upper plate of a Proterozoic thrust system (ca. 1.7 Ga Twilight Gneiss) was eroded prior to exposure of the lower plate (ca. 1.4 Ga Uncompahgre Formation). These results are a significant alternative interpretation of the geologic history of the southern Rocky Mountains.

Colorado↗

History of the Redwall Limestone of northern Arizona

Throughout most of northern Arizona the Redwall Limestone of Mississippian age is readily divisible into four lithologic units, designated in ascending order as the Whitmore Wash, Thunder Springs, Mooney Falls, and Horseshoe Mesa Members. The first and third members are thick-bedded to massive carbonate rock. The Horseshoe Mesa Member is relatively thin-bedded limestone, and the Thunder Springs Member is distinctive because it consists of chert beds alternating with thin beds of carbonate rock. Trends in thickness of the various members indicate that the sediment that formed the Redwall was deposited on an even, gently sloping shelf that extended westward from the Defiance positive element, a low landmass located near the present eastern border of northern Arizona. The Peach Springs and Payson ridges projected west and southwest, respectively, from the positive element. These ridges, which were partly submerged and partly above sea level during Mississippian time, are indicated by the patterns of isopach lines and, in part, by the distribution of faunas. The ridges divided the Arizona section of the shelf into three segments: the northern-most, which slopes northwest toward the Cordilleran geosyncline, and the other two, which slope toward the south and southwest. Two transgressions and two regressions of the western and southern seaways are believed to be represented by the Redwall. The first transgression, which is recorded by thick beds of clastic sediment of the Whitmore Wash Member, was less extensive than the second, which is recorded by massive beds of the Mooney Falls Member, for on the western margins of the Defiance positive element the Mooney Falls Member overlaps the two lower members. Furthermore, south of Grand Canyon the Whitmore Wash and Thunder Springs Members lap against the Payson ridge without covering it, whereas the Mooney Falls Member, although relatively thin, extends across it. Regression is believed to be represented by thin beds of the Thunder Springs and Horseshoe Mesa Members, which are interpreted to be the result of low base level caused by silting up with clastic material and consequent retreat of the sea. Cycles in sedimentation are well developed in some parts of the Redwall, especially in the upper two members in which differences in grain size represent five major cycles recognized throughout the extent of the Grand Canyon. These textural differences, ranging from aphanitic to coarse grained, are considered to be not measures of the amount of transportation, as with terrigenous sediments, but reflections of the degree of turbulence or the lack of turbulence during deposition. They are interpreted as indicators of cyclic fluctuations in environment, probably related to changes in wave base. Several clearly defined facies within the Redwall indicate environments of deposition. The clastic limestone that forms a major part of the formation, especially in the offshore areas to the west and south, is believed to represent normal marine conditions where circulation was good and turbulence moderate to strong. Uniform finely crystalline dolomite probably developed through early diagenetic processes on the sea floor. On the basis of its distribution pattern the dolomite seems to have formed under shoal conditions, especially where it borders the shore of the Defiance positive element and along Peach Springs ridge. Oölitic limestone at the top of both major transgressive units is interpreted as reflecting the oscillatory conditions of sea level that provided wave and current agitation at times of maximum sea advance in shoal areas bordering the ridges. Aphanitic limestone, representing accumulations of lime mud, seems to be developed best in the uppermost, or Horseshoe Mesa, member, where, as the seas regressed, nearshore waters may have been isolated and certainly were very calm. Original textures and some structures are preserved in most limestones of the Redwall, and they give much evidence concerning oceanographic factors of the time. Generalizations have been developed concerning the character of the bottom, degrees of energy represented, depth, salinity, and other factors for various parts of the formation. Although these factors differed greatly with time and space, the general conclusions reached are that (1) depths were very shallow to moderate, (2) the sea floor was composed nearly entirely of lime mud and lime sand, which contained no terrigeneous material but with great crinoidal accumulations locally, (3) turbulence ranged from considerable to none, and (4) the sea was clear and warm and nowhere contained saline concentrations sufficient to form evaporites. Chert forming thin irregular beds, locally lenticular and nodular, occurs at two prinicpal positions in the stratigraphic section, and in each it alternates with thin beds of carbonate rock. Chert is prominent throughout the Thunder Springs Member and forms thin but definite zones near the top of the Mooney Falls Member. This chert is believed to have formed on the sea floor during early diagenesis, as evidenced by petrography, paleogeography, and faunal relations. Regional differences in the abundance and type of associated fossils, recorded on a series of 4-foot-square sample plots made throughout the Grand Canyon, suggest a probable relation between fossil distribution and genesis of the chert. The fauna of the Redwall is abundant and varied, but preservation in many places is poor, and numerous specimens can be collected only locally. The most common fossils are brachiopods, corals, foraminifers, and crinoids, but blastoids, gastropods, cephalopods, and pelecypods are not rare. Bryozoans are abundant in the chert of the Thunder Springs Member but uncommon elsewhere. Other organisms locally distributed but not common are algae, trilobites, fish, holothurians, and ostracodes. These groups have been studied by specialists and are the subject of Chapters V through XIII. Certain of the faunal groups, notably the corals and foraminifers, show some degree of vertical zoning and so have furnished important data on age and correlation. Among the corals, the zones of Dorlodotia inconstans and Michelinia expansa are especially significant because of their persistence from section to section across broad areas. The foraminiferal zones are broader and less sharply defined, but they represent a series of major changes in species from bottom to top of the formation. Age determination made on the basis of foraminifers and brachiopods indicate that the base of the Redwall is progressively younger as it passes from areas that were offshore eastward or northward toward the Defiance positive element; the top of the Redwall, in contrast, is shown to be progressively younger away from the positive element. Thus basal beds of Kinderhook age are recognized at Grand Wash, Quartermaster, and Meriwitica Canyons to the northwest, but the lowest strata are of Osage age at Bridge Canyon, Grandview, and other sections closer to the landmass. Likewise, units with fossils of middle Meramec age occur in western Grand Canyon, but, except in the one place discussed in the following paragraph, topmost beds farther east in Grand Canyon are of Osage age. South of Grand Canyon the youngest member of the Redwall (Horseshoe Mesa) has been removed by pre-Supai Formation erosion. Rocks still younger than the Horseshoe Mesa once may have covered the entire region, possibly representing a third sequence of transgression and regression. At Bright Angel trail in eastern Grand Canyon, for example, a unique unit at the top of the Redwall section contains fossils of Chester age and apparently represents a remnant of Late Mississippian rocks that survived as an inlier there.

Arizona↗

Geophysical framework of the continental United States: Progress, problems, and opportunities for research

Significant progress has been made over the past five decades in determining the geophysical framework of the continental United States. Highlights include detailed maps of gravity and aeromagnetic anomalies, heat flow, crustal thickness, seismicity, state of stress, and paleomagnetic pole positions. Important tectonic insights have come from earthquake studies, and from knowledge of lithospheric structure derived from seismic reflection, refraction/wide-angle reflection, surface-wave, and teleseismic data. Additional major advances in lithospheric geophysics will depend on four key factors: the reduction of uncertainties in the measurement and interpretation of geophysical data, the widespread application of coincident geophysical methods in concert with geological investigations, the collection of a more uniform continent-scale data base for all geophysical measurements, and the investigation of topical geophysical questions regarding the physical state and properties of the lithosphere. The impracticality of repeating most geophysical field measurements introduces poorly known, but likely large, uncertainties. Since most measurements are not repeated, high priority must be given to the reduction and quantification of uncertainties in measurements and interpretations. The most productive future investigations, in terms of resolution and minimum uncertainties in interpretation, will be those that apply different geophysical methods along identical profiles or areas, and that include geological investigations as a vital ingredient. Important gaps remain in our knowledge of the geophysical framework of the United States on a continent-wide scale, including the deep conductivity structure, the nature of the Moho discontinuity, the structure of the subcrustal lithosphere, and the depth of the lithosphere/asthenosphere boundary. Most transition zones separating geologic or physiographic provinces are poorly studied, yet these zones are likely to be the locations of the most profound changes in the physical properties of the lithosphere. Application of coincident geophysical techniques is needed to study these transition zones. Several topical geophysical questions warrant special emphasis in the future. These questions include the rheology of the crust and subcrustal lithosphere; the distribution, composition, and abundance of fluids in the crust; the genesis and evolution of the Moho; the origin of crustal conductivity zones and deep crustal reflections; the evidence for seismic anisotropy; and the short-term prediction of earthquakes.

GSA Memoirs↗

Geology and regional metamorphism of some high-grade cordierite gneisses, Front Range, Colorado

Cordierite is common in regional metamorphic gneisses of Precambrian age in the central part of the Front Range. It occurs in discontinuous stratigraphic units that are structurally a minor component, except locally, of the thick succession of biotite gneisses that comprise the widespread Idaho Springs Formation. The rocks have mineral assemblages, that are characteristic of the sillimanite grade of metamorphism. The cordierite occurs in three principal rock types: (1) potassic feldspar-bearing cordierite-garnet-sillimanite-biotite gneiss, (2) cordierite-biotite gneiss, and (3) cordierite-gedrite-biotite gneiss; each type contains several characteristic mineral assemblages. The rock types are gradational and overlap in areal distribution, and mainly owe their diversity in mineralogy to differences in bulk chemical composition. The field relations are consistent with an interpretation that the diverse cordierite rocks were derived from original sedimentary rocks, largely pelitic sediments. The potassic feldspar-bearing cordierite-garnet gneisses were formed from shales that contained more MgO and FeO than the more abundant sedimentary facies that yielded sillimanitic biotite gneisses. Cordierite-gedrite-biotite gneisses contain much aluminum, iron, and magnesium and little sodium and potassium as compared to the other biotite gneisses; they have an extremely low content of minor elements. Although their chemical compositions are unlike those of known modern sediments, the cordierite-gedrite gneisses are considered also to have been derived from sedimentary rocks. The physical properties and chemical compositions of the mineral phases vary somewhat from one rock type to another. Biotite varies systematically in composition, and the changes are closely related to rock type and thus to bulk composition; the MgO/FeO ratios range from 1.7 in the more mafic cordierite-gedrite rocks to 0.49 in potassic feldspar-bearing cordierite-garnet gneisses. Cordierite is magnesium-rich and intermediate in the range of composition of all analyzed cordierites (Leake, 1960); its MgO/FeO ratio is higher in the gedrite-bearing gneisses than in the potassic feldspar-bearing gneisses. The garnets consist dominantly of the almandine and pyrope molecules, and range from 64 to 75 percent almandine and from 14 to 27 pyrope. These crystals are zoned; their rims are slightly more ferrous and less magnesian than their cores. Both monoclinic and triclinic alkali feldspars coexist in the potassic feldspar-bearing cordierite-garnet gneisses. The potassic feldspars contain from 18 to 27 weight percent NaAlSi 3 O 8 . Plagioclase (oligoclase-andesine) is uncommon in the rocks. Gedrite has an MgO/FeO ratio ranging from 1 to 1.2. Associated minor minerals include iron oxides, andalusite, spinel and its alteration product högbomite, and corundum. The mineral assemblages can be correlated imperfectly with episodes of deformation and metamorphism. Relict staurolite and associated garnet occur locally as remnants of an assemblage formed early in regional metamorphism, presumably early in the first period of deformation. The dominant assemblage biotite-cordierite-garnet-magnetite-plagioclase-potassic feldspar-quartz-sillimanite and associated assemblages having fewer phases, were formed during period one and period two deformations, the principal episodes of regional dynamothermal metamorphism in the central part of the Front Range. A minor assemblage andalusite-biotite-magnetite-plagioclase-quartz was formed later, possibly coincident with a third period of deformation, largely cataclastic in effects, which was more local than the earlier deformations and metamorphism. Phase equilibria studies of the assemblage biotite-cordierite-garnet-magnetite-plagioclase-potassic feldspar-quartz-sillimanite and associated assemblages are interpreted to indicate that the cordierite assemblages approach a state of chemical equilibrium. The scatter of points in a distribution diagram can be interpreted in terms of at least two sets of equilibrium conditions that prevailed during the major plastic deformations. Other discrepancies indicating departure from a homogeneous equilibrium can be explained as a result of mosaic equilibrium involving limited diffusion of iron and magnesium for short distances. The mineral assemblages and the compositions of the ferromagnesian minerals in the cordierite rocks of this region are dependent primarily on the bulk composition of the rocks and variations in the mineral species that comprise the rocks and, to a lesser degree, on the grade of metamorphism. Biotite and cordierite are markedly more magnesian in the more mafic cordierite-gedrite-biotite gneiss than in the potassic feldspar-bearing cordierite-garnet-sillimanite-biotite gneiss. Associated microcline gneiss and biotite-sillimanite gneiss that contains muscovite as a primary stable mineral provides a means to define the metamorphic grade in the area of study. It is concluded from analyses of the assemblages with respect to theoretical phase relations in the system SiO 2 -Al 2 O 3 -Na 2 O-K 2 O-H 2 O that at least some of the rocks in the Central City-Nederland area are above the sillimanite-potassic feldspar isograd as defined by Evans and Guidotti (1966). In rocks of appropriate composition, muscovite is a stable phase in assemblages containing potassic feldspar and sillimanite. The cordierite assemblages and associated rocks are inferred to have formed in an environment having a load pressure of 3–5 kilobars (fluid pressure equaled load pressure) and a temperature somewhat in excess of 620° C.

Colorado↗

Stable carbon and oxygen isotope studies of the sediments of Elk Lake, Minnesota

Variations in the ratios of 18 O: 16 O and 13 C: 12 C in calcite throughout the Holocene in Elk Lake, Minnesota, are recorded in three varve-calibrated carbonate cores. Marl in a varved deep-basin (29.6 m) core consists mainly of calcite precipitated from surface waters during the summer and probably provides the least complicated isotope record. Marl in a sublittoral (10 m) core consists of calcite contributed from several inorganic and organic sources and probably is the most complicated of the three isotope records. Calcite from shells of the ostracod Candona ohioensis in the sublittoral core provides a record of shallow-water conditions in Elk Lake for the period between 10,500 and 5500 varve yr. Variations in the 13 C: 12 C ratio of organic carbon deposited in Elk Lake during the Holocene are recorded in organic matter in the deep-basin core. All three oxygen isotope records show that, in general, the 18 O: 16 O ratio in carbonate was enriched in 18 O by several parts per mil during the mid-Holocene relative to the past few thousand years. This pattern of oxygen isotope variation is similar to that observed for carbonate materials from other lakes in the northeastern and north-central United States. Oxygen isotope records from these other lakes also show that the 18 O: 16 O ratio during the early Holocene was lower than during the mid-Holocene, and this pattern has been interpreted as representing a response to a generally warmer and drier climate during the mid-Holocene beginning about 8000 varve yr (the so-called hypsithermal). Ostracod and diatom assemblages from Elk Lake cores show, however, that the lake was colder and more saline than at present until at least 6700 varve yr, with conditions similar to those that exist today in cold prairie lakes of Canada. It may be more appropriate, therefore, to refer to the mid-Holocene in northwestern Minnesota as the “prairie period” rather than the hypsithermal, indicating that the climate was drier, but with no connotation regarding temperature. The oxygen isotope data from the three Elk Lake records for this period are somewhat equivocal. Values of δ 18 O in the marl from the sublittoral core and shells of Candona increase from 10,000 to about 6800 varve yr. However, values of δ 18 O in the marl that accumulated in the deepest part of the lake over the same interval (10,000–6800 varve yr) are more or less constant and enriched in 18 O; this probably reflects the cold, saline prairie-lake conditions predicted from the ostracod and diatom assemblage data. All three oxygen isotope records show decreases in 18 O: 16 O ratios after about 6800 varve yr in response to an increase in temperature and decrease in salinity of the lake. The 13 C: 12 C ratios in carbonates from all three Elk Lake records show a distinct pattern; the ratio increased gradually from 10,000 to 8000 varve yr going into the mid-Holocene prairie period and then decreased gradually coming out of the prairie period between about 5500 and 2500 varve yr. These changes in the 13 C: 12 C ratio could have been related to temperature through its effect on solubility of carbon dioxide; however, this interpretation is not supported by the oxygen isotope data. Another possibility is that changes in the 13 C: 12 C ratio are related to organic productivity that removes 13 C-depleted organic carbon and results in 13 C-enriched surface waters. This interpretation implies that organic productivity was higher in Elk Lake during the mid-Holocene prairie period. Support for the high-productivity, 13 C-enriched surface-water model for the mid-Holocene prairie period in Elk Lake is provided by changes in the 13 C: 12 C ratio of organic carbon in the deep-basin core. These changes parallel almost exactly those in the 13 C: 12 C ratio of carbonate carbon, but are about 2% larger (about 6% as opposed to about 4% for carbonate carbon). The difference of about 2% may represent 13 C depletion due to CO 2 limitation. The percentage of organic carbon in the sediment did not increase during the prairie period because it was diluted by an increased flux of detrital clastic material. The ultimate burial rate of organic carbon increased considerably, however, indicating that organic productivity was higher and/or the degree of preservation increased. Diatom assemblages and plant-pigment concentrations indicate that productivity was higher during the prairie period. Pyrolysis hydrogen and oxygen indices show that the 13 C-enriched organic matter that accumulated during the prairie period was hydrogen rich and oxygen poor relative to organic matter that accumulated before and after. These two indices demonstrate that the organic matter that accumulated during the prairie period was much better preserved.

Minnestoa↗

Time and space relationships of the taconic allochthon and autochthon

The Taconic rock sequence extends from near Sudbury, Vermont, to near Poughkeepsie, New York, a length of about 150 miles; and from just west of the Green Mountain Range and Berkshire Highlands to the valleys of the Hudson River and Lake Champlain, a width of about 20 miles. The Taconic rocks are now in the axial region of the Middlebury synclinorium and its southward extension. The Taconic sequence consists of about 2000 feet of slate, with subsidiary graywacke, quartzite, and limestone; many of the rock units are turbidites. Fossils from the rocks include forms of Early, Middle, and Late Cambrian and Early and Middle Ordovician age. Evidence of stratigraphic tops derived from the fossils and from primary sedimentary features agrees with structural data and demonstrates that the Taconic rocks are geometrically the highest strata within the Middlebury synclinorium. The underlying rocks of the synclinorium (the synclinorium sequence) are right side up; they also range in age from Early Cambrian to Middle Ordovician but belong to a different sedimentary lithofacies (dominantly carbonate and orthoquartzite). The relation between the Taconic sequence and the synclinorium sequence, therefore, is a baffling problem. Lithostratigraphically, the Taconic sequence falls into three groups: (1) the pre- Normanskill "low Taconic " sequence, occurring in the area between the main Taconic Range and the Hudson River, as far south as Rhinebeck, New York; (2) the Normanskill Shale in the same area, as well as in the area south of Rhinebeck at least as far as Poughkeepsie, New York, and also west of the Hudson River; and (3) the "high Taconic " sequence, occupying the main Taconic Range from Dorset Mountain, Vermont, south to Indian Mountain in Sharon, Connecticut, as well as Mount Greylock in Massachusetts. Rocks of (1) and (2) are fossiliferous, but to date no fossil has been found in (3). Rocks of (1) and that part of (2) areally coextensive with (1) thus are of known age but uncertain three-dimensional geometric configuration, whereas rocks of (3) are of known configuration (in the centers of open synclinoria) but unknown age. Only that part of (2) beyond the areal confines of (1) is both of known age and known configuration; these rocks are in sedimentary contact above the older rocks of the synclinorium sequence and are autochthonous. At the north end of the Taconic sequence in western Vermont, rocks of group (1) are beyond reasonable doubt allochthonous. Because of the southward geometric continuity of the structural elements, all the Taconic rocks of group (1), and that part of group (2) areally coextensive with it, are interpreted as allochthonous. The structure of group (3), the high Taconic sequence, is inferred by topography and by detailed lithostratigraphic matching with rocks of the east Vermont sequence; on this basis, as well as on the basis of the broad lithic similarity with rocks of group (1), rocks of group (3) are concluded to be also allochthonous. A discontinuous polymict conglomerate underlies and surrounds the allochthon on all sides and is interpreted here as a record that dates the imminent arrival of the allochthon at each locality. The conglomerate contains unsorted blocks of rocks of both the Taconic sequence and the synclinorium sequence; the matrix is the autochthonous upper Normanskill Shale or its equivalent. Fossils from the matrix shale date the event as Trenton, probably Sherman Fall in age. The geologic history of the area is reconstructed as follows: The pre-Normanskill Taconic rocks were deposited in the area of the present Precambrian massifs of the Green Mountains-Berkshire Highlands belt between the clastic, eugeosynclinal east Vermont sequence to the east and the miogeosynclinal synclinorium sequence to the west; they constitute the transitional facies between these two belts. Conditions were relatively stable until early Middle Ordovician time , when the Green Mountain- Berkshire Highlands area began to rise and the area of the present Middlebury synclinorium began to subside. Subsidence took place largely by a series of high-angle longitudinal faults that, as a whole, step down to the west. Argillaceous sediments (the Normanskill Shale) began to inundate the former miogeosynclinal area; because the conditions of sedimentation had become similar, the sediments resembled, in facies, the synchronous Taconic rocks that were being deposited to the east. Continued rise of the Green Mountains-Berkshire Highlands area led in middle Trenton time to the decollement of the Cambrian and Ordovician sediments into the area of the present Middlebury synclinorium in a series of giant submarine slides. Sedimentation continued at the receiving site throughout the event; sedimentation may also have persisted on the moving slides. The record is found today in the turbidite-laden shale and graywacke in the upper part of the Normanskill Shale of both the allochthon and the autochthon . Restoration of the allochthonous rocks to the original site of deposition leads to correlations between rocks of the Taconic sequence and of the largely autochthonous east Vermont sequence. The lithic correlation can be carried to the level of individual formations and is confirmed by a few known ages in the east Vermont sequence. Several lines of reasoning lead to a plausible correlation of part of the Cavendish Formation of southeastern Vermont with the oldest part of the Taconic sequence. This correlation leads further to the conclusion that in this area the contacts between the Green Mountain massif and the Cavendish Formation and between the Cavendish and the overlying east Vermont sequence must both be thrust faults of large displacements. This conclusion is in fact inevitable because one of the Taconic thrust slices that extends without interruption between the latitudes corresponding to the gap in the Precambrian massifs has been shown by local structural evidence to be allochthonous; an outside original depositional site must be found for it. The present Taconic allochthon is coextensive with an area of marked negative Bouguer gravity anomaly; the Green Mountains-Berkshire massifs constitute a belt of positive anomaly. It is here proposed that these anomalies resulted from a deepseated transfer of material; subcrustal addition of material caused the rise of the Green Mountains-Berkshire Highlands area, and the concurrent subtraction of material caused subsidence in the Middlebury synclinorium area through a series of faults which were the near-surface expression of an episode of crustal collapse. If this interpretation is correct, then the regional gravity anomaly represents an uncompensated feature that has persisted since Middle Ordovician time .

Special Paper of the Geological Society of America↗

SHRIMP U–Pb and REE data pertaining to the origins of xenotime in Belt Supergroup rocks: evidence for ages of deposition, hydrothermal alteration, and metamorphism

The Belt–Purcell Supergroup, northern Idaho, western Montana, and southern British Columbia, is a thick succession of Mesoproterozoic sedimentary rocks with an age range of about 1470–1400 Ma. Stratigraphic layers within several sedimentary units were sampled to apply the new technique of U–Pb dating of xenotime that sometimes forms as rims on detrital zircon during burial diagenesis; xenotime also can form epitaxial overgrowths on zircon during hydrothermal and metamorphic events. Belt Supergroup units sampled are the Prichard and Revett Formations in the lower Belt, and the McNamara and Garnet Range Formations and Pilcher Quartzite in the upper Belt. Additionally, all samples that yielded xenotime were also processed for detrital zircon to provide maximum age constraints for the time of deposition and information about provenances; the sample of Prichard Formation yielded monazite that was also analyzed. Ten xenotime overgrowths from the Prichard Formation yielded a U–Pb age of 1458 ± 4 Ma. However, because scanning electron microscope – backscattered electrons (SEM–BSE) imagery suggests complications due to possible analysis of multiple age zones, we prefer a slightly older age of 1462 ± 6 Ma derived from the three oldest samples, within error of a previous U–Pb zircon age on the syn-sedimentary Plains sill. We interpret the Prichard xenotime as diagenetic in origin. Monazite from the Prichard Formation, originally thought to be detrital, yielded Cretaceous metamorphic ages. Xenotime from the McNamara and Garnet Range Formations and Pilcher Quartzite formed at about 1160– 1050 Ma, several hundred million years after deposition, and probably also experienced Early Cretaceous growth. These xenotime overgrowths are interpreted as metamorphic–diagenetic in origin (i.e., derived during greenschist facies metamorphism elsewhere in the basin, but deposited in sub-greenschist facies rocks). Several xenotime grains are older detrital grains of igneous derivation. A previous study on the Revett Formation at the Spar Lake Ag–Cu deposit provides data for xenotime overgrowths in several ore zones formed by hydrothermal processes; herein, those results are compared with data from newly analyzed diagenetic, metamorphic, and magmatic xenotime overgrowths. The origin of a xenotime overgrowth is reflected in its rareearth element (REE) pattern. Detrital (i.e., igneous) xenotime has a large negative Eu anomaly and is heavy rare-earth element (HREE)-enriched (similar to REE in igneous zircon). Diagenetic xenotime has a small negative Eu anomaly and flat HREE (Tb to Lu). Hydrothermal xenotime is depleted in light rare-earth element (LREE), has a small negative Eu anomaly, and decreasing HREE. Metamorphic xenotime is very LREE-depleted, has a very small negative Eu anomaly, and is strongly depleted in HREE (from Gd to Lu). Because these characteristics seem to be process related, they may be useful for interpretation of xenotime of unknown origin. The occurrence of 1.16–1.05 Ga metamorphic xenotime, in the apparent absence of pervasive deformation structures, suggests that the heating may be related to poorly understood regional heating due to broad regional underplating of mafic magma. These results may be additional evidence (together with published ages from metamorphic titanite, zircon, monazite, and garnet) for an enigmatic, Grenville-age metamorphic event that is more widely recognized in the southwestern and eastern United States

Alberta, British Columbia, Idaho, Montana, Oregon,↗

The Lower Cretaceous sequence of western Alaska – demise of the Koyukuk terrane?

Lower Cretaceous marine sedimentary rocks, deposited in shallow shelf and basin settings and unconformity-bound, are well exposed in southwest Alaska. Collections of Early Cretaceous fossils from across western Alaska show that similar and coeval Lower Cretaceous clastic rocks are widely distributed though only locally exposed. Volcanic rocks become an important part of the Lower Cretaceous sequence in the Yukon-Koyukuk basin where they have been interpreted to represent a mobile intra-oceanic island arc, the Koyukuk terrane, that collided with Arctic Alaska to form the Brooks Range orogen. The volcanic rocks are chemically unlike Aleutian arc rocks but share compositional characteristics with spatially related, mid-Cretaceous alkaline intrusive rocks. The volcanic-bearing sequence was also deposited on an angular unconformity, includes both shallow shelf and basin depositional settings, and is unconformably overlain by mid-Cretaceous clastic rocks. The volcanic rocks are therefore considered part of the Lower Cretaceous sequence now identified across western Alaska. In this interpretation, the Lower Cretaceous volcanic rocks are an initial expression of the mid-Cretaceous tectonic regime that included extensional exhumation and subsidence, crustal and upper mantle melting, and high temperature metamorphism in the hinterland of the Brooks Range orogen. The Cretaceous heating that led to hinterland crust and upper mantle change may have been caused by deep mantle disturbances in a post-subduction setting. This interpretation has implications for the timing of contractional orogenesis, the location and nature of the related continental borderland, and the tectonic setting for development of the Anguyucham and related oceanic terranes.

Alaska↗

Northward migration of the Cascadia forearc in the northwestern U.S. and implications for subduction deformation

Geologic and paleomagnetic data from the Cascadia forearc indicate long-term northward migration and clockwise rotation of an Oregon coastal block with respect to North America. Paleomagnetic rotation of coastal Oregon is linked by a Klamath Mountains pole to geodetically and geologically determined motion of the Sierra Nevada block to derive a new Oregon Coast—North America (OC-NA) pole of rotation and velocity field. This long-term velocity field, which is independent of Pacific Northwest GPS data, is interpreted to be the result of Basin-Range extension and Pacific-North America dextral shear. The resulting Oregon Coast pole compares favorably to those derived solely from GPS data, although uncertainties are large. Subtracting the long-term motion from forearc GPS velocities reveals ENE motion with respect to an OC reference frame that is parallel to the direction of Juan de Fuca-OC convergence and decreases inland. We interpret this to be largely the result of subduction-related deformation. The adjusted mean GPS velocities are generally subparallel to those predicted from elastic dislocation models for Cascadia, but more definitive interpretations await refinement of the present large uncertainty in the Sierra Nevada block motion.

British Columbia, Washington↗

When to be discrete: The importance of time formulation in understanding animal movement

Animal movement is essential to our understanding of population dynamics, animal behavior, and the impacts of global change. Coupled with high-resolution biotelemetry data, exciting new inferences about animal movement have been facilitated by various specifications of contemporary models. These approaches differ, but most share common themes. One key distinction is whether the underlying movement process is conceptualized in discrete or continuous time. This is perhaps the greatest source of confusion among practitioners, both in terms of implementation and biological interpretation. In general, animal movement occurs in continuous time but we observe it at fixed discrete-time intervals. Thus, continuous time is conceptually and theoretically appealing, but in practice it is perhaps more intuitive to interpret movement in discrete intervals. With an emphasis on state-space models, we explore the differences and similarities between continuous and discrete versions of mechanistic movement models, establish some common terminology, and indicate under which circumstances one form might be preferred over another. Counter to the overly simplistic view that discrete- and continuous-time conceptualizations are merely different means to the same end, we present novel mathematical results revealing hitherto unappreciated consequences of model formulation on inferences about animal movement. Notably, the speed and direction of movement are intrinsically linked in current continuous-time random walk formulations, and this can have important implications when interpreting animal behavior. We illustrate these concepts in the context of state-space models with multiple movement behavior states using northern fur seal ( Callorhinus ursinus ) biotelemetry data.

Movement Ecology↗

The use of Schlumberger and equatorial soundings in groundwater investigations near El Paso, Texas

Electrical soundings using the symmetric AMNB Schlumberger and the bipole-dipole equatorial arrays were made along two profiles near El Paso, Texas, in support of a groundwater exploration program which included seismic refraction and gravity surveys. Electrode spacings (AB/2 or R) reaching 12,000 ft allowed exploration to depths of about 7000 ft. Geoelectrical information on the subsurface materials was augmented by sounding with the bilateral equatorial configuration and by transforming Schlumberger curves into dipole-polar sounding curves with formulas developed by Al'pin and by Tsekov. The bilateral equatorial sounding curves were found useful for detecting the direction of dip of highly resistive bedrocks whereas transformed sounding curves were used to evaluate the average longitudinal resistivity, and hence the depth, to the "electric basement." A few of the Schlumberger sounding curves were either clearly or subtly distorted by nonhorizontal geologic structures. The interpretation of these sounding curves illustrates the requirement for careful analysis in processing electrical prospecting data obtained over complex geologic conditions. The interpretation of a combined Schlumberger-equatorial sounding curve, which did not agree with the preliminary interpretation of seismic refraction data, was confirmed to be correct by data from a test well drilled to a depth of 4363 ft. The application of electrical sounding data in the El Paso area furnished valuable information on the depth to fresh-water-saltwater interfaces and on the depth to highly resistive impervious bedrocks.

Texas↗

Resistivity, self‐potential, and induced‐polarization surveys of a vapor‐dominated geothermal system

The Mud Volcano area in Yellowstone National Park provides an example of a vapor‐dominated geothermal system. A test well drilled to a depth of about 347 ft penetrated the vapor‐dominated reservoir at a depth of less than 300 ft. Subsequently, 16 vertical electrical soundings (VES) of the Schlumberger type were made along a 3.7‐mile traverse to evaluate the electrical resistivity distribution within this geothermal field. Interpretation of the VES curves by computer modeling indicates that the vapor‐dominated layer has a resistivity of about 75–130 ohm‐m and that its lateral extent is about 1 mile. It is characteristically overlain by a low‐resistivity layer of about 2–6.5 ohm‐m, and it is laterally confined by a layer of about 30 ohm‐m. This 30‐ohm‐m layer, which probably represents hot water circulating in low‐porosity rocks, also underlies most of the survey at an average depth of about 1000 ft. Horizontal resistivity profiles, measured with two electrode spacings of an AMN array, qualitatively corroborate the sounding interpretation. The profiling data delineate the southeast boundary of the geothermal field as a distinct transition from low to high apparent resistivities. The northwest boundary is less distinctly defined because of the presence of thick lake deposits of low resistivities. A broad positive self‐potential anomaly is observed over the geothermal field, and it is interpretable in terms of the circulation of the thermal waters. Induced‐polarization anomalies were obtained at the northwest boundary and near the southeast boundary of the vapor‐dominated field. These anomalies probably are caused by relatively high concentrations of pyrite.

Wyoming↗