Geology Reports⌕ Search

SEARCH · Geology Reports

Results for “Chemistry Select”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6Linked to original sources
USGS2018

Groundwater chemistry and water-level elevations in bedrock aquifers of the Piceance and Yellow Creek watersheds, Rio Blanco County, Colorado, 2013–16

The Piceance and Yellow Creek watersheds in Rio Blanco County, Colorado, are known to contain important energy resources (oil shale and natural gas) and mineral resources (nahcolite). The primary sources of fresh groundwater in the Piceance and Yellow Creek watersheds are bedrock aquifers in the Uinta and Green River Formations. The aquifers are divided into an upper and lower aquifer separated by a regionally extensive semiconfining layer. These aquifers provide water to streams and springs in the watersheds and are an important resource to people living and working in the area. Development of energy and mineral resources has the potential to affect the quality of groundwater in several ways. The Bureau of Land Management and the U.S. Geological Survey began groundwater monitoring in 2010 to characterize the groundwater quality and water-level elevations of shallow bedrock aquifers in the Piceance and Yellow Creek watersheds. The purpose of this report is to present ground-water chemistry and water-level elevations collected during 2013–16. Comparisons are made to data that were collected from the bedrock aquifers from 2010 to 2012 to identify the potential for changes in water quality and water-level elevations. Appreciable changes in water-level elevations and hydraulic gradient were observed in early April 2015 in two wells completed in the upper and lower aquifers. The hydraulic gradient between the two wells was consistently downward from the upper aquifer to the lower aquifer during 2010–15; however, in early April 2015, the gradient changed from downward to upward between the two aquifers. Overall, water-level elevations declined by about 14 and 11 feet in the upper and lower aquifers, respectively, from 2013 to 2016. Previously published data estimated groundwater ages at 1,200 years old in the upper aquifer and 9,600 years old in the lower aquifer. These groundwater ages indicate that ground-water was recharged over thousands of years. With such long periods of time for aquifer recharge, declines in water-level elevation over short time steps (a few months) have important implications for sustainable management of this resource. Solution mining activities or drilling for oil and natural gas in the area could be related to the changes observed in water-level elevations in these wells; however, further investigation would be needed to evaluate causation. Changes in major-ion chemistry were evaluated in the bedrock aquifer using time series plots of select major-ion data from 2010 to 2016. Major-ion chemistry was variable for a single well from 2010 to 2016 where alkalinity and sulfate were the most variable constituents. One possible explanation for the observed changes in major-ion chemistry may be that the sample depth for that well no longer represents the most appreciable flow in the borehole. On a larger scale, potential changes in flow within the borehole may indicate changes in the regional flow system. Methane and volatile organic compound concentrations were evaluated using a similar approach to that of major ions and had similar findings. Methane concentrations in wells sampled from 2010 to 2016 were generally constant. The only exception was observed at a single well where the range of methane concentrations was from 57.4 (2010) to 4.02 milligrams per liter (2013). This is the same well where changes in water-level elevation, hydraulic gradient, and major-ion chemistry were observed, providing multiple lines of evidence to indicate change in the bedrock aquifers. Sampling of a well located in an area with little energy development but where faults or fractures could provide a path for the migration of fluids indicate mixing of groundwater between the upper and lower aquifers.

Colorado↗
USGS2008

Environmental Monitoring and Assessment Program Western Pilot Project— Conditions of North Dakota perennial streams for water chemistry and mercury in fish tissue, 2000–2003

Sixty-five sampling sites, selected by a statistical design to represent lengths of perennial streams in North Dakota, were chosen to be sampled for water chemistry and mercury in fish tissue to establish unbiased baseline data. From the assessment of all water chemistry constituents, the percentage of stream length considered to be in poor condition was greater in the Rangeland Plains than in the Cultivated Plains. About 30 percent of perennial stream length in North Dakota was considered to be in good condition on the basis of mercury concentrations in fish tissue.

North Dakota↗
USGS1968

Chapter IX: Lunar theory and processes

Whereas the previous Surveyor missions were undertaken to examine mare surfaces as potential landing areas for the Apollo Program, the primary objective of the Surveyor VII mission, based on purely scientific motivations, was to explore a contrasting highland region and, specifically, to determine the chemistry of the highland material for comparison with the Surveyor V and VI chemical analyses at the mare sites. Site selection was limited to some extent by Surveyor operational constraints, but primarily by the requirements of 10-m-resolution photographs from the Lunar Orbiter Program for landing site certification. None of the nine sites studied in detail appeared capable of providing an unambiguous answer to the highland chemistry. The final selection of a site to the north of Tycho was based on the belief that the youthful character of the structure implied a minimum of contamination to the surface layers by foreign material via meteoritic processes. Moreover, the selection of a site near the rim of a major lunar crater promised insight into the “microscale” properties of a structure that represents the dominant morphologic feature on the moon.

Book chapter↗
USGS2008

Effects of forest harvesting on ecosystem health in the headwaters of the New York City Water Supply, Catskill Mountains, New York

The effects of forest clearcutting and selective harvesting on forest soils, soil and stream water chemistry, forest regrowth, and aquatic communities were studied in four small headwater catchments. This research was conducted to identify the sensitivity of forested ecosystems to forest disturbance in the northeastern United States. The study area was in the headwaters of the Neversink Reservoir watershed, part of the New York City water supply system, in the Catskill Mountains of southeastern New York. Two sub-catchments of the Shelter Creek watershed were selectively harvested, one in its northern half and one more heavily in its southern half in 1995?96, the Dry Creek watershed was clearcut in the winter of 1996?97, and the Clear Creek watershed was left undisturbed and monitored as a control site. Monitoring was conducted from 4 years before the harvests until 4 years after the harvests. Clearcutting caused a large release of nitrate (NO3-) from watershed soils and a concurrent release of inorganic monomeric aluminum (Alim), which is toxic to some aquatic biota. The increased soil NO3- concentrations measured after the harvest could be completely accounted for by the decrease in nitrogen (N) uptake by watershed trees, rather than an increase in N mineralization and nitrification. The large increase in stream water NO3- and Alim concentrations caused 100-percent mortality of caged brook trout (Salvelinus fontinalis) during the first year after the clearcut and adversely affected macroinvertebrate communities for 2 years after the harvest. Nutrient uptake and biomass accumulation increased in uncut mature trees after the two selective harvests. There was no increase in stream-water NO3- or Alim concentrations, and so there were no adverse affects on macroinvertebrate or trout communities. The amount of tree biomass that can be removed without causing a sharp increase in stream-water NO3- and Alim stream-water concentrations is unknown, but probably depends on the history of forest-disturbance and acid deposition and the level of soil acidification. Results of this study indicate that macroinvertebrate and brook trout communities were sensitive to clearcutting and that deer browsing may affect water quality by suppressing forest regeneration and nutrient uptake. Further studies of selective harvests could identify the harvesting threshold below which changes in water quality and soil chemistry are minimized, and nutrient retention is maximized, thus reducing the damage that logging can inflict on stream and aquatic communities.

New York↗
USGS2023

Interaction of a legacy groundwater contaminant plume with the Little Wind River from 2015 through 2017, Riverton Processing site, Wyoming

The Riverton Processing site was a uranium mill 4 kilometers southwest of Riverton, Wyoming, that prepared uranium ore for nuclear reactors and weapons from 1958 to 1963. The U.S. Department of Energy completed surface remediation of the uranium tailings in 1989; however, groundwater below and downgradient from the tailings site and nearby Little Wind River was not remediated. Beginning in 2010, a series of floods along the Little Wind River began to mobilize contaminants in the unsaturated zone, resulting in substantial increases of uranium and other contaminants of concern in monitoring wells completed inside the contaminant plume. In 2011, the U.S. Department of Energy started a series of university and Government agency retrospective and field investigations to understand the processes controlling contaminant increases in the groundwater plume. The goals of the field investigations described in this report were to (1) identify and quantify the contaminant flux and potential associated biological effects from groundwater associated with the legacy plume as it enters a perennial stream reach, and (2) assess chemical exposure and potential effects to biological receptors from the interaction of the contaminant plume and the river. Field investigations along the Little Wind River were completed by the U.S. Geological Survey during 2015–17 in cooperation with the U.S. Department of Energy Office of Legacy Management to characterize: (1) seepage areas and seepage rates; (2) pore-water and bed sediment chemistry and hyporheic exchange and reactive loss; and (3) exposure pathways and biological receptors. All data collected during the study are contained in two U.S. Geological Survey data releases, available at https://doi.org/10.5066/F7BR8QX4 and https://doi.org/10.5066/P9J9VJBR . A variety of tools and methods were used during the field characterizations. Streambed temperature mapping, electrical resistivity tomography, electromagnetic induction, fiber-optic distributed temperature sensing, tube seepage meters, vertical thermal sensor arrays, and an environmental tracer (radon) were used to identify areas of groundwater seepage and associated seepage rates along specific sections of the study reach of the river. Drive points, minipiezometers, diffusive equilibrium in thin-film/diffusive gradients in thin-film probes, bed-sediment samples, and equal discharge increment sampling methods were used to characterize pore-water chemistry, estimate hyporheic exchange and reactive loss of selected chemical constituents, and quantify contaminant loadings entering the study reach. Sampling and analysis of surface sediments, filamentous algae, periphytic algae, and macroinvertebrates were used to characterize biological exposure pathways, metal uptake, and receptors. Areas of focused groundwater discharge identified by the fiber-optic distributed temperature sensing surveys corresponded closely with areas of elevated electrical conductivity identified by the electromagnetic induction survey results in the top 5 meters of sediment. During three monitoring periods in 2016, the mean vertical seepage rate measured with tube seepage meters was 0.45 meter per day, ranging from −0.02 to 1.55 meters per day. Five of the 11 locations where vertical thermal profile data were collected along the study reach during August 2017 indicated mean upwelling values ranging from 0.11 to 0.23 meter per day. Radon data collected from the Little Wind River during June, July, and August 2016 indicated a consistent inflow of groundwater to the central part of the study reach, in the area congruous with the center of the previously mapped groundwater plume discharge zone. During August 2017, the greatest attenuation of uranium from reactive loss in pore-water samples was observed at three locations along the study reach, at depths between 6 and 15 centimeters, and similar trends in molybdenum attenuation were also observed. Bed-sediment concentration profiles collected during 2017 also indicated attenuation of uranium and molybdenum from groundwater during hyporheic mixing of surface water with the legacy plume during groundwater upwelling into the river. Streamflow measurements combined with equal discharge increment water sampling along the study reach indicated an increase in dissolved uranium concentrations in the downstream direction during 2016 and 2017. Net uranium load entering the Little Wind River study reach was about 290 and 435 grams per day during 2016 and 2017, respectively. Biological samples indicated that low levels of uranium and molybdenum exposure were confined to the benthos in the Little Wind River within and immediately downstream from the perimeter of the groundwater plume. Concentrations of molybdenum and uranium in filamentous algae were consistently low at all sites in the study reach with no indication of increased exposure of dissolved bioavailable molybdenum or uranium at sites next to or downstream from the groundwater plume. Comparison of the August 2017 results from electromagnetic induction, tube seepage meters, vertical thermal profiling, and pore-water chemistry surveys were in general agreement in identifying areas with upwelling groundwater conditions along the study reach. However, the electroconductivity values measured with electromagnetic induction in the top 100 centimeters of sediment did not agree with sodium concentrations measured in pore-water samples collected at similar streambed depths. Differences and similarities between multiple methods can result in additional insights into hydrologic and biogeochemical processes that may be occurring along a reach of a river system interacting with shallow groundwater inputs. It may be advantageous to apply a variety of geophysical, geochemical, hydrologic, and biological tools at other Uranium Mill Tailings Remedial Action ( https://www.energy.gov/sites/prod/files/2014/10/f19/UMTRCA.pdf ) sites during the investigation of legacy contaminant plume interactions with surface-water systems.

Wyoming↗
USGS2008

Ground-water quality data in the coastal Los Angeles Basin study unit, 2006: Results from the California GAMA Program

Ground-water quality in the approximately 860 square-mile Coastal Los Angeles Basin study unit (CLAB) was investigated from June to November of 2006 as part of the Statewide Basin Assessment Project of the Ground-Water Ambient Monitoring and Assessment (GAMA) Program. The GAMA Statewide Basin Assessment was developed in response to the Ground-Water Quality Monitoring Act of 2001, and is being conducted by the U.S. Geological Survey (USGS) in cooperation with the California State Water Resources Control Board (SWRCB). The Coastal Los Angeles Basin study was designed to provide a spatially unbiased assessment of raw ground-water quality within CLAB, as well as a statistically consistent basis for comparing water quality throughout California. Samples were collected from 69 wells in Los Angeles and Orange Counties. Fifty-five of the wells were selected using a spatially distributed, randomized grid-based method to provide statistical representation of the study area (?grid wells?). Fourteen additional wells were selected to evaluate changes in ground-water chemistry or to gain a greater understanding of the ground-water quality within a specific portion of the Coastal Los Angeles Basin study unit ('understanding wells'). Ground-water samples were analyzed for: a large number of synthetic organic constituents [volatile organic compounds (VOCs), gasoline oxygenates and their degradates, pesticides, polar pesticides, and pesticide degradates, pharmaceutical compounds, and potential wastewater-indicators]; constituents of special interest [perchlorate, N-nitrosodimethylamine (NDMA), 1,4-dioxane, and 1,2,3-trichloropropane (1,2,3-TCP)]; inorganic constituents that can occur naturally [nutrients, major and minor ions, and trace elements]; radioactive constituents [gross-alpha and gross-beta radiation, radium isotopes, and radon-222]; and microbial indicators. Naturally occurring isotopes [stable isotopic ratios of hydrogen and oxygen, and activities of tritium and carbon-14] and dissolved noble gases also were measured to help identify the sources and ages of the sampled ground water. Quality-control samples (blanks, replicates, and samples for matrix spikes) were collected at approximately one-fourth of the wells, and the results for these samples were used to evaluate the quality of the data for the ground-water samples. Field blanks rarely contained detectable concentrations of any constituent, suggesting that contamination was not a significant source of bias. Differences between replicate samples were within acceptable ranges, indicating acceptably low variability. Matrix spike recoveries were within acceptable ranges for most compounds. Assessment of the quality-control information resulted in applying ?V? codes to approximately 0.1 percent of the data collected for ground-water samples (meaning a constituent was detected in blanks as well as the corresponding environmental data). This study did not attempt to evaluate the quality of drinking water delivered to consumers; after withdrawal from the ground, water typically is treated, disinfected, and (or) blended with other waters to maintain acceptable drinking-water quality. Regulatory thresholds are applied to the treated drinking water that is served to the consumer, not to raw ground water. However, to provide some context for the results, concentrations of constituents measured in the raw ground water were compared with regulatory and non-regulatory health-based thresholds established by the U.S. Environmental Protection Agency (USEPA), California Department of Public Health (CDPH, formerly California Department of Health Services [CADHS]) and thresholds established for aesthetic concerns (secondary maximum contaminant levels, SMCL-CA) by CDPH. Comparisons between data collected for this study and drinking-water thresholds are for illustrative purposes only, and are not indicative of compliance or non-compliance with those thresholds. VOCs were detected in alm

California↗
USGS2025

Assessment of water chemistry of the Coconino aquifer in northeastern Arizona

The Coconino aquifer was investigated as a potential groundwater resource for the Hopi Tribe and Navajo Nation in northeastern Arizona. Basic groundwater chemistry, including major ions, total dissolved solids, and selected trace metal concentrations, are presented and analyzed to characterize the Coconino aquifer. The geochemical compositions of groundwater are associated with changes in geology and groundwater movement and are compared to drinking-water standards to determine suitable areas for potential groundwater resource development. Dissolved-solids concentrations in much of the Coconino aquifer water were higher than the U.S. Environmental Protection Agency’s secondary drinking-water standard of 500 milligrams per liter (mg/L) due to a buried halite body in the southeastern part of the study area. However, trace metal concentrations were generally low. Groundwater may need to be treated for high dissolved-solids concentrations before it is suitable for use as a resource for the Hopi Tribe and Navajo Nation.

Arizona↗
USGS2003

Reconnaissance of mercury in lakes, wetlands, and rivers in the Red River of the North Basin, North Dakota, March through August 2001

Devils Lake rose dramatically during the 1990's, causing extensive flood damages. Because of the potential for continued flooding, the U.S. Army Corps of Engineers has been conducting studies to evaluate the feasibility of constructing and operating an outlet from Devils Lake. The occurrence of mercury in lakes, wetlands, and rivers and the potential for increased loading of mercury into the Sheyenne River as a result of a Devils Lake outlet needed to be evaluated as part of the studies. Sixteen lake, wetland, and river sites in the Devils Lake, Sheyenne River, Red River of the North, and Red Lake River Basins were sampled and analyzed for mercury constituents and other selected properties and constituents relevant to mercury aquatic chemistry. For the lake and wetland sites, whole-water methylmercury concentrations ranged from less than 0.04 to 3.53 nanograms per liter and whole-water total mercury concentrations ranged from 0.38 to 7.02 nanograms per liter. Conditions favorable for methylation of mercury generally exist at the lake and wetland sites, as indicated by larger dissolved methylmercury concentrations in near-bottom samples than in near-surface samples and by relatively large ratios of methylmercury to total mercury (generally greater than 10 percent for the summer sampling period). Total mercury concentrations were larger for the summer sampling period than for the winter sampling period for all lake and wetland sites. A wetland site in the upper Devils Lake Basin had the largest mercury concentrations for the lake and wetland sites. For the river sites, whole-water methylmercury concentrations ranged from 0.15 to 1.13 nanograms per liter and whole-water total mercury concentrations ranged from 2.00 to 26.90 nanograms per liter. Most of the mercury for the river sites occurred in particulate inorganic phase. Summer ratios of whole-water methylmercury to whole-water total mercury were 35 percent for Starkweather Coulee (a wetland-dominated site), near or less than 10 percent for the Sheyenne River sites, and less than 8 percent for the Red River of the North and Red Lake River sites. Although the number of samples collected during this investigation is small, results indicated an outlet from Devils Lake probably would not have adverse effects on mercury concentrations in the Sheyenne River upstream from Lake Ashtabula. However, because discharges in the Sheyenne River would increase during some periods, loads of mercury entering Lake Ashtabula also would increase. Lake Ashtabula probably serves as a sink for suspended sediment and mercury. Thus, a Devils Lake outlet probably would not have substantial effects on mercury concentrations and loads in the downstream part of the Sheyenne River or in the Red River of the North. More substantial effects could occur for Lake Ashtabula.

North Dakota↗
USGS2016

Potential sources of analytical bias and error in selected trace element data-quality analyses

Potential sources of analytical bias and error associated with laboratory analyses for selected trace elements where concentrations were greater in filtered samples than in paired unfiltered samples were evaluated by U.S. Geological Survey (USGS) Water Quality Specialists in collaboration with the USGS National Water Quality Laboratory (NWQL) and the Branch of Quality Systems (BQS). Causes for trace-element concentrations in filtered samples to exceed those in associated unfiltered samples have been attributed to variability in analytical measurements, analytical bias, sample contamination either in the field or laboratory, and (or) sample-matrix chemistry. These issues have not only been attributed to data generated by the USGS NWQL but have been observed in data generated by other laboratories. This study continues the evaluation of potential analytical bias and error resulting from matrix chemistry and instrument variability by evaluating the performance of seven selected trace elements in paired filtered and unfiltered surface-water and groundwater samples collected from 23 sampling sites of varying chemistries from six States, matrix spike recoveries, and standard reference materials. Filtered and unfiltered samples have been routinely analyzed on separate inductively coupled plasma-mass spectrometry instruments. Unfiltered samples are treated with hydrochloric acid (HCl) during an in-bottle digestion procedure; filtered samples are not routinely treated with HCl as part of the laboratory analytical procedure. To evaluate the influence of HCl on different sample matrices, an aliquot of the filtered samples was treated with HCl. The addition of HCl did little to differentiate the analytical results between filtered samples treated with HCl from those samples left untreated; however, there was a small, but noticeable, decrease in the number of instances where a particular trace-element concentration was greater in a filtered sample than in the associated unfiltered sample for all trace elements except selenium. Accounting for the small dilution effect (2 percent) from the addition of HCl, as required for the in-bottle digestion procedure for unfiltered samples, may be one step toward decreasing the number of instances where trace-element concentrations are greater in filtered samples than in paired unfiltered samples. The laboratory analyses of arsenic, cadmium, lead, and zinc did not appear to be influenced by instrument biases. These trace elements showed similar results on both instruments used to analyze filtered and unfiltered samples. The results for aluminum and molybdenum tended to be higher on the instrument designated to analyze unfiltered samples; the results for selenium tended to be lower. The matrices used to prepare calibration standards were different for the two instruments. The instrument designated for the analysis of unfiltered samples was calibrated using standards prepared in a nitric:hydrochloric acid (HNO 3 :HCl) matrix. The instrument designated for the analysis of filtered samples was calibrated using standards prepared in a matrix acidified only with HNO 3 . Matrix chemistry may have influenced the responses of aluminum, molybdenum, and selenium on the two instruments. The best analytical practice is to calibrate instruments using calibration standards prepared in matrices that reasonably match those of the samples being analyzed. Filtered and unfiltered samples were spiked over a range of trace-element concentrations from less than 1 to 58 times ambient concentrations. The greater the magnitude of the trace-element spike concentration relative to the ambient concentration, the greater the likelihood spike recoveries will be within data control guidelines (80–120 percent). Greater variability in spike recoveries occurred when trace elements were spiked at concentrations less than 10 times the ambient concentration. Spike recoveries that were considerably lower than 90 percent often were associated with spiked concentrations substantially lower than what was present in the ambient sample. Because the main purpose of spiking natural water samples with known quantities of a particular analyte is to assess possible matrix effects on analytical results, the results of this study stress the importance of spiking samples at concentrations that are reasonably close to what is expected but sufficiently high to exceed analytical variability. Generally, differences in spike recovery results between paired filtered and unfiltered samples were minimal when samples were analyzed on the same instrument. Analytical results for trace-element concentrations in ambient filtered and unfiltered samples greater than 10 and 40 μg/L, respectively, were within the data-quality objective for precision of ±25 percent. Ambient trace-element concentrations in filtered samples greater than the long-term method detection limits but less than 10 μg/L failed to meet the data-quality objective for precision for at least one trace element in about 54 percent of the samples. Similarly, trace-element concentrations in unfiltered samples greater than the long-term method detection limits but less than 40 μg/L failed to meet this data-quality objective for at least one trace-element analysis in about 58 percent of the samples. Although, aluminum and zinc were particularly problematic, limited re-analyses of filtered and unfiltered samples appeared to improve otherwise failed analytical precision. The evaluation of analytical bias using standard reference materials indicate a slight low bias for results for arsenic, cadmium, selenium, and zinc. Aluminum and molybdenum show signs of high bias. There was no observed bias, as determined using the standard reference materials, during the analysis of lead.

Scientific Investigations Report↗
USGS2018

Species‐ and habitat‐specific otolith chemistry patterns inform riverine fisheries management

Geology and hydrology are drivers of water chemistry and thus important considerations for fish otolith chemistry research. However, other factors such as species and habitat identity may have predictive ability, enabling selection of appropriate elemental signatures prior to costly, perhaps unnecessary water/age‐0 fish sampling. The goal of this study was to develop a predictive methodology for using species and habitat identity to design efficient otolith chemistry studies. Duplicate water samples and age‐0 fish were collected from 61 sites in 4 Missouri River reservoirs for walleye Sander vitreus and one impoundment (Lake Sharpe, South Dakota) for other fishes (bluegill Lepomis macrochirus , black crappie Pomoxis nigromaculatus , gizzard shad Dorosoma cepedianum , largemouth bass Micropterus salmoides , smallmouth bass M. dolomieu , white bass Morone chrysops , white crappie P. annularis , and yellow perch Perca flavescens ). Water chemistry (barium:calcium [Ba:Ca], strontium:calcium [Sr:Ca]) was temporally stable, spatially variable, and highly correlated with otolith chemistry for all species except yellow perch. Classification accuracies based on bivariate Ba:Ca and Sr:Ca signatures were high (84% across species) yet varied between floodplain and main‐channel habitats in a species‐specific manner. Thus, to maximize the reliability of otolith chemistry, researchers can use species classifications presented herein to inform habitat selection (e.g., study reservoir‐oriented species such as white bass in main‐channel environments) and habitat‐based classifications to inform species selection (e.g., focus floodplain studies on littoral species such as largemouth bass). Overall, species and habitat identity are important considerations for efficient, effective otolith chemistry studies that inform and advance fisheries and aquatic resource management.

North Dakota, South Dakota↗
USGS2017

Design and methods of the Midwest Stream Quality Assessment (MSQA), 2013

During 2013, the U.S. Geological Survey (USGS) National Water-Quality Assessment Project (NAWQA), in collaboration with the USGS Columbia Environmental Research Center, the U.S. Environmental Protection Agency (EPA) National Rivers and Streams Assessment (NRSA), and the EPA Office of Pesticide Programs assessed stream quality across the Midwestern United States. This Midwest Stream Quality Assessment (MSQA) simultaneously characterized watershed and stream-reach water-quality stressors along with instream biological conditions, to better understand regional stressor-effects relations. The MSQA design focused on effects from the widespread agriculture in the region and urban development because of their importance as ecological stressors of particular concern to Midwest region resource managers. A combined random stratified selection and a targeted selection based on land-use data were used to identify and select sites representing gradients in agricultural intensity across the region. During a 14-week period from May through August 2013, 100 sites were selected and sampled 12 times for contaminants, nutrients, and sediment. This 14-week water-quality “index” period culminated with an ecological survey of habitat, periphyton, benthic macroinvertebrates, and fish at all sites. Sediment was collected during the ecological survey for analysis of sediment chemistry and toxicity testing. Of the 100 sites, 50 were selected for the MSQA random stratified group from 154 NRSA sites planned for the region, and the other 50 MSQA sites were selected as targeted sites to more evenly cover agricultural and urban stressor gradients in the study area. Of the 50 targeted sites, 12 were in urbanized watersheds and 21 represented “good” biological conditions or “least disturbed” conditions. The remaining 17 targeted sites were selected to improve coverage of the agricultural intensity gradient or because of historical data collection to provide temporal context for the study. This report provides a detailed description of the MSQA study components, including surveys of ecological conditions, routine water sampling, deployment of passive polar organic compound integrative samplers, and stream sediment sampling at all sites. Component studies that were completed to provide finer scale temporal data or more extensive analysis at selected sites, included continuous water-quality monitoring, daily pesticide sampling, laboratory and in-stream water toxicity testing efforts, and deployment of passive suspended-sediment samplers.

Illinois, Indiana, Iowa, Kansas, Kentucky, Michiga↗
USGS1989

Geohydrologic data for selected springs in eastern Nevada through 1982, with emphasis on White Pine County

Discharge and water-chemistry data for springs in eastern Nevada , with an emphasis on White Pine County, are compiled and tabulated. Discharge data for springs emanating from the deep carbonate rocks are included. The report contains: (1) miscellaneous discharge measurements for 131 selected springs in White Pine County and vicinity; (2) selected water quality data for 557 sampled springs in White Pine County and vicinity; and (3) discharge data for 42 regional springs in the eastern Nevada carbonate-rock system. (USGS)

Open-File Report↗
USGS2014

High-speed limnology: Using advanced sensors to investigate spatial variability in biogeochemistry and hydrology

Advanced sensor technology is widely used in aquatic monitoring and research. Most applications focus on temporal variability, whereas spatial variability has been challenging to document. We assess the capability of water chemistry sensors embedded in a high-speed water intake system to document spatial variability. This new sensor platform continuously samples surface water at a range of speeds (0 to >45 km h –1 ) resulting in high-density, mesoscale spatial data. These novel observations reveal previously unknown variability in physical, chemical, and biological factors in streams, rivers, and lakes. By combining multiple sensors into one platform, we were able to detect terrestrial–aquatic hydrologic connections in a small dystrophic lake, to infer the role of main-channel vs backwater nutrient processing in a large river and to detect sharp chemical changes across aquatic ecosystem boundaries in a stream/lake complex. Spatial sensor data were verified in our examples by comparing with standard lab-based measurements of selected variables. Spatial fDOM data showed strong correlation with wet chemistry measurements of DOC, and optical NO 3 concentrations were highly correlated with lab-based measurements. High-frequency spatial data similar to our examples could be used to further understand aquatic biogeochemical fluxes, ecological patterns, and ecosystem processes, and will both inform and benefit from fixed-site data.

Wisconsin↗
USGS2001

Water chemistry near the closed Norman Landfill, Cleveland County, Oklahoma, 1995

The Norman Landfill was selected for study as part of the U.S. Geological Survey Toxic Substances Hydrology Program in 1994. The landfill is located south of the City of Norman on alluvial deposits of the Canadian River. Type of waste deposited in the landfill from 1922 to 1973 was largely unrestricted and may include substances now recognized as hazardous. Dissolved and suspended substances leached from wastes in the closed and capped landfill are now in ground water extending toward the Canadian River as a plume of leachate. Water samples were collected from two stock wells, one domestic well, temporary drive-point wells, the Canadian River, and a small intermittent stream hydraulically downgradient of the capped landfill known as the slough. Most constituent concentrations were greater in ground water downgradient from the capped landfill than in background ground water and were greater in the slough than in the Canadian River. Concentrations of most constituents in the Canadian River, other than sulfate, manganese, and iron, were similar to concentrations in background ground water. Some constituents measured in ground-water for this investigation are potential indicators of leachate contamination. Potential indicators that could be used to differentiate leachate contaminated water from uncontaminated ground water of the alluvial aquifer include specific conductance, chloride, alkalinity, dissolved organic carbon, boron, and dD. Specific conductance and chloride were greater in water from wells downgradient of the landfill than water from background wells. Dissolved organic carbon and boron also were greater in the leachate contaminated ground water than in background ground water.

Oklahoma↗
USGS1989

Investigations of the characteristics, origin, and residence time of the upland residual mantle of the Piedmont of Fairfax County, Virginia

Undisturbed cores of upland regolith developed from a variety of crystalline rocks of the Piedmont province in Fairfax County, Va., have been obtained by using a combination of Shelby tubes, Denison sampler, and modified diamond core drilling. The core study correlated variations in chemistry, mineralogy, and texture with engineering properties throughout individual weathering profiles and contrasted these parameters among weathering profiles developed from various parent rocks. Coring sites were chosen to obtain a maximum depth of weathering on diverse lithologies. The rocks that were investigated included metapelite, metagraywacke, granite, diabase, and serpentinite. Four to twelve samples per core were selected for analysis of petrography, texture, clay mineralogy, and major-element chemistry. The number of samples was determined on the basis of (1) the thickness of the weathering profile (from about 1 m in serpentinite to more than 30 m in pelitic schist) and (2) megascopic changes in the weathering profile. Shear strength and compressibility were determined on corresponding segments of core. Standard penetration tests were performed adjacent to coring sites to evaluate in-place engineering properties. The regolith profiles on all rocks can be subdivided into soil, massive subsoil, saprolite, and weathered rock zones. Major differences in thicknesses of these zones are related to parent rock. Total regolith thickness is related to saprolite thickness. Saprolite is thickest on quartzofeldspathic metapelite, metagraywacke, and granite; thinner on diabase; and thinnest on serpentinite. Thickness of saprolite is related to rock structure and mineralogy. Geochemical changes of saprolite developed from each rock type follow predictable trends from fresh rock to soil profile, with increases in Ti, AI, Fe 3 +, and H 2 0+relative to absolute losses of Si, Fe2+, Mg, Ca, and Na. These variations are more pronounced in the weathering profiles above mafic and ultramafic rocks than in those above metagraywacke. Clay minerals in granite, schist, and metagraywacke saprolites are kaolinite, dioctahedral vermiculite, interlayered mica-vermiculite, and minor illite. Gibbsite is developed in near-surface samples of schist. Standard penetration test data for the upper 7 m of saprolite above schist, metagraywacke, and granite suggest alternations between stronger and weaker horizons that correlate with megascopic ally identified zones: soil, massive subsoil, and saprolite. The data correlate with density. Shear strength increases fairly regularly downward in the weathering profile. The engineering behavior of diabase saprolite is controlled by a dense, plastic, near-surface clay layer (montmorillonite and kaolinite) overlying rock that is weathered to a granular state (grus); the engineering properties of serpentinite are controlled by a very thin weathering profile. Similarities in regolith thickness, zonation, mineralogy, and chemistry of quartzofeldspathic rocks indicate the existence of fundamental geochemical and geomechanical controls on regolith evolution on the Piedmont upland. Data from the profiles of quartzofeldspathic regolith are used to construct a model suggesting the principal rate-control steps in the development and downwasting of the upland regolith. This model is consistent with available information about Piedmont hydrology and tectonic uplift.

Professional Paper↗
USGS2001

Toxicity assessment of sediments from the Grand Calumet River and Indiana Harbor Canal in northwestern Indiana, USA

The objective of this study was to evaluate the toxicity of sediments from the Grand Calumet River and Indiana Harbor Canal located in northwestern Indiana, USA. Toxicity tests used in this assessment included 10-day sediment exposures with the amphipod Hyalella azteca , 31-day sediment exposures with the oligochaete Lumbriculus variegatus , and the Microtox® Solid-Phase Sediment Toxicity Test. A total of 30 sampling stations were selected in locations that had limited historic matching toxicity and chemistry data. Toxic effects on amphipod survival were observed in 60% of the samples from the assessment area. Results of a toxicity test with oligochaetes indicated that sediments from the assessment area were too toxic to be used in proposed bioaccumulation testing. Measurement of amphipod length after the 10-day exposures did not provide useful information beyond that provided by the survival endpoint. Seven of the 15 samples that were identified as toxic in the amphipod tests were not identified as toxic in the Microtox test, indicating that the 10-day H. azteca test was more sensitive than the Microtox test. Samples that were toxic tended to have the highest concentrations of metals, polycyclic aromatic hydrocarbons (PAHs), and polychlorinated biphenyls (PCBs). The toxic samples often had an excess of simultaneously extracted metals (SEM) relative to acid volatile sulfide (AVS) and had multiple exceedances of probable effect concentrations (PECs). Metals may have contributed to the toxicity of samples that had both an excess molar concentration of SEM relative to AVS and elevated concentrations of metals in pore water. However, of the samples that had an excess of SEM relative to AVS, only 38% of these samples had elevated concentration of metals in pore water. The lack of correspondence between SEM-AVS and pore water metals indicates that there are variables in addition to AVS controlling the concentrations of metals in pore water. A mean PEC quotient of 3.4 (based on concentrations of metals, PAHs, and PCBs) was exceeded in 33% of the sediment samples and a mean quotient of 0.63 was exceeded in 70% of the thirty sediment samples from the assessment area. A 50% incidence of toxicity has been previously reported in a database for sediment tests with H. azteca at a mean quotient of 3.4 in 10-day exposures and at a mean quotient of 0.63 in 28-day exposures. Among the Indiana Harbor samples, most of the samples with a mean PEC quotient above 0.63 ( i.e. , 15 of 21; 71%) and above 3.4 ( i.e. , 10 of 10; 100%) were toxic to amphipods. Results of this study and previous studies demonstrate that sediments from this assessment area are among the most contaminated and toxic that have ever been reported.

Indiana↗
USGS1999

Water resources of the Batavia Kill basin at Windham, Greene County, New York

The water resources of a 27.6-square-mile section of the Batavia Kill Basin near the village of Windham, N.Y., which has undergone substantial development, were evaluated. The evaluation entailed (1) estimation of the magnitude and distribution of several hydrologic components, including recharge, (2) measurement of discharge and chemical quality of the Batavia Kill and selected tributaries, (3) analysis of ground-water flow and chemistry, and (4) a conceptualization of the ground-water flow system. The region consists of deeply dissected, relatively flat-lying, clastic sedimentary sequences variably overlain by as much as 120 feet of glacial deposits. The types of bedrock fractures and their distribution in the Batavia Kill valley are consistent with valley stress-relief characteristics. Till predominates in the uplands, and stratified drift typically dominates within the valley of the Batavia Kill and the lower section of its largest tributary valley (Mitchell Hollow). Fractured bedrock is the most commonly used water source within the study area. The areas of highest yielding bedrock generally are with valleys, where the shallow fractures are saturated. Stratified-drift aquifers are also limited to the largest valleys; the greatest saturated thicknesses are in the Batavia Kill valley at Windham. A conceptual model of ground-water flow within the study areas suggests that the zones of most active flow are shallow fractured bedrock in upland areas and the shallow stratified drift in the largest valleys. The hydrogeologic system has been altered by development; major effects include (1) chemical alteration of natural ground-water and surface-water quality by point- and nonpoint-source contaminants, (2) hydraulic interconnection of other-wise isolated bedrock fractures by wellbores, and (3) drawdowns in wells within the Batavia Kill valley by pumping from the bedrock aquifer. Water resource development of the most promising unconsolidated aquifer beneath Windham may be precluded by the potential for contamination by leachate from an abandoned landfill, road-salt stockpiles, and domestic septic systems in the area.

New York↗