Geology Reports⌕ Search

USGS · sir20225089

Interaction of a legacy groundwater contaminant plume with the Little Wind River from 2015 through 2017, Riverton Processing site, Wyoming

Abstract

The Riverton Processing site was a uranium mill 4 kilometers southwest of Riverton, Wyoming, that prepared uranium ore for nuclear reactors and weapons from 1958 to 1963. The U.S. Department of Energy completed surface remediation of the uranium tailings in 1989; however, groundwater below and downgradient from the tailings site and nearby Little Wind River was not remediated. Beginning in 2010, a series of floods along the Little Wind River began to mobilize contaminants in the unsaturated zone, resulting in substantial increases of uranium and other contaminants of concern in monitoring wells completed inside the contaminant plume. In 2011, the U.S. Department of Energy started a series of university and Government agency retrospective and field investigations to understand the processes controlling contaminant increases in the groundwater plume. The goals of the field investigations described in this report were to (1) identify and quantify the contaminant flux and potential associated biological effects from groundwater associated with the legacy plume as it enters a perennial stream reach, and (2) assess chemical exposure and potential effects to biological receptors from the interaction of the contaminant plume and the river. Field investigations along the Little Wind River were completed by the U.S. Geological Survey during 2015–17 in cooperation with the U.S. Department of Energy Office of Legacy Management to characterize: (1) seepage areas and seepage rates; (2) pore-water and bed sediment chemistry and hyporheic exchange and reactive loss; and (3) exposure pathways and biological receptors. All data collected during the study are contained in two U.S. Geological Survey data releases, available at https://doi.org/10.5066/F7BR8QX4 and https://doi.org/10.5066/P9J9VJBR . A variety of tools and methods were used during the field characterizations. Streambed temperature mapping, electrical resistivity tomography, electromagnetic induction, fiber-optic distributed temperature sensing, tube seepage meters, vertical thermal sensor arrays, and an environmental tracer (radon) were used to identify areas of groundwater seepage and associated seepage rates along specific sections of the study reach of the river. Drive points, minipiezometers, diffusive equilibrium in thin-film/diffusive gradients in thin-film probes, bed-sediment samples, and equal discharge increment sampling methods were used to characterize pore-water chemistry, estimate hyporheic exchange and reactive loss of selected chemical constituents, and quantify contaminant loadings entering the study reach. Sampling and analysis of surface sediments, filamentous algae, periphytic algae, and macroinvertebrates were used to characterize biological exposure pathways, metal uptake, and receptors. Areas of focused groundwater discharge identified by the fiber-optic distributed temperature sensing surveys corresponded closely with areas of elevated electrical conductivity identified by the electromagnetic induction survey results in the top 5 meters of sediment. During three monitoring periods in 2016, the mean vertical seepage rate measured with tube seepage meters was 0.45 meter per day, ranging from −0.02 to 1.55 meters per day. Five of the 11 locations where vertical thermal profile data were collected along the study reach during August 2017 indicated mean upwelling values ranging from 0.11 to 0.23 meter per day. Radon data collected from the Little Wind River during June, July, and August 2016 indicated a consistent inflow of groundwater to the central part of the study reach, in the area congruous with the center of the previously mapped groundwater plume discharge zone. During August 2017, the greatest attenuation of uranium from reactive loss in pore-water samples was observed at three locations along the study reach, at depths between 6 and 15 centimeters, and similar trends in molybdenum attenuation were also observed. Bed-sediment concentration profiles collected during 2017 also indicated attenuation of uranium and molybdenum from groundwater during hyporheic mixing of surface water with the legacy plume during groundwater upwelling into the river. Streamflow measurements combined with equal discharge increment water sampling along the study reach indicated an increase in dissolved uranium concentrations in the downstream direction during 2016 and 2017. Net uranium load entering the Little Wind River study reach was about 290 and 435 grams per day during 2016 and 2017, respectively. Biological samples indicated that low levels of uranium and molybdenum exposure were confined to the benthos in the Little Wind River within and immediately downstream from the perimeter of the groundwater plume. Concentrations of molybdenum and uranium in filamentous algae were consistently low at all sites in the study reach with no indication of increased exposure of dissolved bioavailable molybdenum or uranium at sites next to or downstream from the groundwater plume. Comparison of the August 2017 results from electromagnetic induction, tube seepage meters, vertical thermal profiling, and pore-water chemistry surveys were in general agreement in identifying areas with upwelling groundwater conditions along the study reach. However, the electroconductivity values measured with electromagnetic induction in the top 100 centimeters of sediment did not agree with sodium concentrations measured in pore-water samples collected at similar streambed depths. Differences and similarities between multiple methods can result in additional insights into hydrologic and biogeochemical processes that may be occurring along a reach of a river system interacting with shallow groundwater inputs. It may be advantageous to apply a variety of geophysical, geochemical, hydrologic, and biological tools at other Uranium Mill Tailings Remedial Action ( https://www.energy.gov/sites/prod/files/2014/10/f19/UMTRCA.pdf ) sites during the investigation of legacy contaminant plume interactions with surface-water systems.

Explore related subjects

90° N90° S · 180° W ← longitude → 180° E
Source-reported bounding extent: 42.5° to 43.5° latitude; -109° to -107.5° longitude. This indicates report coverage, not an exact sampling location. View area on OpenStreetMap.

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

David L. Naftz, Christopher C. Fuller, Robert L. Runkel, John Solder, W. Payton Gardner, Neil C. Terry, Martin A. Briggs, Terry M. Short, Daniel J. Cain, William L Dam, Patrick A. Byrne, James R. Campbell. 2023-01-26. Interaction of a legacy groundwater contaminant plume with the Little Wind River from 2015 through 2017, Riverton Processing site, Wyoming. https://doi.org/10.3133/sir20225089

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related USGS reports

Slip tendency and dilation tendency of Quaternary faults in the Great Basin region, Arizona, California, Idaho, Nevada, Oregon, Utah, and Wyoming

This report presents the results of slip tendency and dilation tendency analysis of Quaternary faults in the Great Basin region, in the states of Arizona, California, Idaho, Nevada, Oregon, Utah, and Wyoming. This effort was undertaken as part of two studies: the U.S. Department of Energy Geothermal Technologies Office-funded Innovative Geothermal Exploration through Novel Investigations of Undiscovered Systems (INGENIOUS) project, which is a multidisciplinary, multi-institution effort to develop new methodologies and best practices to accelerate the discovery of new, commercially viable hydrothermal resources; and the U.S. Geological Survey Geothermal Resources Investigations Project. The goal of this work is to identify faults and fault segments that are appropriately oriented to be stress-loaded for slip or to dilate under the ambient stress conditions. Both conditions may make such faults more likely to host permeability and fluid flow relative to other faults in the region. Slip tendency and dilation tendency were calculated for all fault segments in the study area from the U.S. Geological Survey Quaternary Fault and Fold Database. Results demonstrate that faults with high slip tendency and dilation tendency are common in the Great Basin region. The areas containing many high slip tendency and dilation tendency fault segments are associated with high strain rates. These areas also host a relatively high proportion of the known hydrothermal systems. This indicates that faults with high slip tendency and dilation tendency in areas with high strain-rate are potentially most prospective for hosting hydrothermal systems. The database published in coordination with this report contains the slip tendency and dilation tendency results data, including the fault geometry and stress data used to calculate these quantities, for both the Great Basin study area and the smaller INGENIOUS study area.

Arizona, California, Idaho, Nevada, Oregon, Utah, ↗

A spatial analysis of the groundwater emergence flood hazard in Long Island, New York, and coastal areas surrounding Long Island Sound in New York, Connecticut, and Rhode Island

Long Island, New York, and nearby coastal areas surrounding Long Island Sound are densely populated and, like other coastal areas, are susceptible to flooding from several potential sources, including stormwater from precipitation events, tidal flooding and storm surge, and groundwater emergence flooding. Groundwater emergence fooding refers to the intersection of a rising water table with land surface or critical infrastructure. Many studies of flood drivers either neglect or only briefly discuss how shallow groundwater conditions may contribute to or exacerbate flood conditions. As a part of a comprehensive study of compound flood hazards in the coastal areas of Long Island and Long Island Sound, a spatial analysis was completed by the U.S. Geological Survey, in cooperation with the Environmental Protection Agency’s Long Island Sound Partnership, formerly called the Long Island Sound Study, using available regional datasets to characterize the potential hazard for groundwater emergence flooding. The approximately 3,100 square mile study area was subdivided into 11,407 grid cells that were 900 meters by 900 meters (approximately 3,000 feet by 3,000 feet), for the purpose of integrating the spatial datasets to calculate and map the groundwater emergence flood hazard. The depth to the water table, hydrologic soil groups, and National Land Cover Database were harmonized to the common grid. A groundwater emergence flood hazard score was calculated for each grid cell for current average conditions following a set of rules accounting for the depth to the water table and the percentage of area within each cell with slow infiltrating soils. A scenario with a higher sea-level position was also calculated for the Long Island part of the study area. The calculated groundwater emergence flood hazard score was reviewed in conjunction with the National Land Cover Database to identify developed areas and associated infrastructure that may be at risk of potential groundwater emergence flooding. Study results indicate that the groundwater emergence flood hazard is highest in coastal areas and near surface water where the water table is close to ground surface. Inland areas away from surface waterbodies are not likely to be exposed to groundwater emergence flooding. For Long Island, in the scenario with higher sea-level position, a greater groundwater emergence flood hazard is calculated for some locations closer to the coast and where land is submerged. Away from the coast and surface-water drainage, the groundwater emergence flood hazard is similar between the current average sea-level condition and the higher sea-level position scenario.

Connecticut, New York, Rhode Island↗

Streamflow assessment of Birch Creek, southern boundary of the Blackfeet Indian Reservation, Pondera County, northwestern Montana—Synoptic and continuous streamflow measurements through 2022

The U.S. Geological Survey, in cooperation with the Blackfeet Water Department, performed this study to assist water-resource managers in understanding and quantifying irrigation diversions, instream flows, and the spatial and temporal streamflow dynamics of Birch Creek in northwestern Montana. Birch Creek forms the southernmost boundary of the Blackfeet Indian Reservation and is highly valued culturally as an aquatic life and wildlife resource and as a principal source of water for irrigation. The study area included Birch Creek from Swift Dam to 53.3 miles downstream just above its confluence with the Two Medicine River. The study period was calendar year 2022, but selected historical information was also included in the study. Birch Creek streamflow originates through releases from Swift Reservoir, with the largest releases typically occurring during the irrigation season (May–October) to primarily meet the needs of downstream irrigators. This study included the compilation and collection of (1) continuous streamflow measured at streamgages installed for this study, (2) instantaneous streamflow measurements made during four synoptic events, and (3) reported daily values of Swift Reservoir outflow and irrigation diversions. Continuous streamflow data were available from two U.S. Geological Survey streamgages: Birch Creek below Heart Butte Road, near Heart Butte, Montana (upper streamgage; station 06094900), at river mile 12.9 and Birch Creek at Bullhead Bridge near Valier, Mont. (lower streamgage; station 06098120), at river mile 53.3. The upper streamgage (station 06094900) was primarily affected by the regulated releases from Swift Dam with daily mean streamflow typically slightly higher than the reported Swift Reservoir outflows. Daily mean streamflow ranged from 9.87 cubic feet per second (ft 3 /s) (November 18, 2022) to 640 ft 3 /s (June 22, 2022) during September 16, 2021–December 31, 2022. The mean annual streamflow was 122 ft 3 /s in water year 2022 (a water year is the 12-month period from October 1 to September 30 and is designated by the year in which it ends), about 13 percent greater than the mean annual reported Swift Reservoir outflows. The lower streamgage (station 06098120) was downstream from all major tributaries and diversions within the Birch Creek drainage basin. Daily mean streamflow ranged from 6.02 ft 3 /s (September 8, 2022) to 95.0 ft 3 /s (June 5, 2021) during August 26, 2020–December 31, 2022. Mean annual streamflow was 27.8 ft 3 /s for water year 2022. Flows at the lower streamgage (station 06098120) were typically lower than at the upper streamgage (station 06094900) from late April to early October, whereas flows from early October to late spring were similar to or greater than those at the upper streamgage. The upper streamgage had a total streamflow volume of 87,960 acre-feet (acre-ft) for water year 2022, whereas the lower streamgage had a total streamflow of 20,357 acre-ft. A net volume of about 67,603 acre-ft was removed from Birch Creek through diversions, losses to groundwater, and evapotranspiration along that reach during water year 2022. Most of the changes in main-stem streamflow could be accounted for by the tributary inflows or diversion outflows. The most dynamic streamflow gains and losses occurred along the upper few miles of Birch Creek. Streamflow was consistently lost to the groundwater system immediately below Swift Dam and then returned to levels that slightly exceeded the outflow at the dam near river mile 11.0. The overall net gains for the entire 53.3-mile study reach ranged from 15.5 to 42.6 ft 3 /s among the synoptic events. On several occasions, streamflow fell below minimum instream flow conditions specified in the Blackfeet Compact (water rights compact among the Blackfeet Tribe, State of Montana, and United States), which are subject to a 15-year deferral period (until June 12, 2033). Notably, a section of Birch Creek immediately downstream from Swift Dam was completely dry during the October 18, 2022, synoptic event.

Montana↗