SEARCH · Geology Reports

Results for “Modern Geology”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,009 records · Page 56Linked to original sources

USGS2010

Status and understanding of groundwater quality in the North San Francisco Bay groundwater basins, 2004: California GAMA Priority Basin Project

Groundwater quality in the approximately 1,000-square-mile (2,590-square-kilometer) North San Francisco Bay study unit was investigated as part of the Priority Basin Project of the Groundwater Ambient Monitoring and Assessment (GAMA) Program. The study unit is located in northern California in Marin, Napa, and Sonoma Counties. The GAMA Priority Basin Project is being conducted by the California State Water Resources Control Board in collaboration with the U.S. Geological Survey (USGS) and the Lawrence Livermore National Laboratory. The GAMA North San Francisco Bay study was designed to provide a spatially unbiased assessment of untreated groundwater quality in the primary aquifer systems. The assessment is based on water-quality and ancillary data collected by the USGS from 89 wells in 2004 and water-quality data from the California Department of Public Health (CDPH) database. The primary aquifer systems (hereinafter referred to as primary aquifers) were defined by the depth interval of the wells listed in the CDPH database for the North San Francisco Bay study unit. The quality of groundwater in shallower or deeper water-bearing zones may differ from that in the primary aquifers; shallower groundwater may be more vulnerable to surficial contamination. The first component of this study, the status of the current quality of the groundwater resource, was assessed by using data from samples analyzed for volatile organic compounds (VOC), pesticides, and naturally occurring inorganic constituents, such as major ions and trace elements. This status assessment is intended to characterize the quality of groundwater resources within the primary aquifers of the North San Francisco Bay study unit, not the treated drinking water delivered to consumers by water purveyors. Relative-concentrations (sample concentration divided by the health- or aesthetic-based benchmark concentration) were used for evaluating groundwater quality for those constituents that have Federal and (or) California benchmarks. A relative-concentration greater than (>) 1.0 indicates a concentration above a benchmark, and less than or equal to (≤) 1.0 indicates a concentration equal to or below a benchmark. Relative-concentrations of organic and special interest constituents were classified as “high” (relative-concentration > 1.0), “moderate” (0.1 < relative-concentration ≤ 1.0), or “low” (relative-concentration ≤ 0.1). Inorganic constituent relative-concentrations were classified as “high” (relative-concentration > 1.0), “moderate” (0.5 < relative-concentration ≤ 1.0), or “low” (relative-concentration ≤ 0.5). Aquifer-scale proportion was used as a metric for evaluating regional-scale groundwater quality. High aquifer-scale proportion is defined as the percentage of the primary aquifers that have a relative-concentration greater than 1.0; proportion is calculated on an areal rather than a volumetric basis. Moderate and low aquifer-scale proportions were defined as the percentage of the primary aquifers that have moderate and low relative-concentrations, respectively. Two statistical approaches—grid-based and spatially-weighted—were used to evaluate aquifer-scale proportion for individual constituents and classes of constituents. Grid-based and spatially-weighted estimates were comparable in the North San Francisco Bay study unit (90-percent confidence intervals). For inorganic constituents with human-health benchmarks, relative-concentrations were high in 14.0 percent of the primary aquifers, moderate in 35.8 percent, and low in 50.2 percent. The high aquifer-scale proportion of inorganic constituents primarily reflected high aquifer-scale proportions of arsenic (10.0 percent), boron (4.1 percent), and lead (1.6 percent). In contrast, relative-concentrations of organic constituents (one or more) were high in 1.4 percent, moderate in 4.9 percent, and low in 93.7 percent (not detected in 64.8 percent) of the primary aquifers. The high aquifer-scale proportion of organic constituents primarily reflected high aquifer-scale proportions of PCE (1.3 percent), TCE (0.1 percent), and 1,1-dichloroethene (0.1 percent). The inorganic constituents with secondary maximum contaminant levels (SMCL), manganese and iron, had relative-concentrations that were high in 40.8 percent and 24.4 percent of the primary aquifers, respectively. Of the 255 organic and special-interest constituents analyzed for, 26 constituents were detected. Two organic constituents were frequently detected (in 10 percent or more of samples), the trihalomethane chloroform and the herbicide simazine, but both were detected at low relative-concentrations. The second component of this study, the understanding assessment, identified the natural and human factors that affect groundwater quality by evaluating land use, physical characteristics of the wells, geochemical conditions of the aquifer, and water temperature. Results from these evaluations were used to explain the occurrence and distribution of constituents in the study unit. The understanding assessment indicated that a majority of the wells that contained nitrate also had an urban or agricultural land-use classification, had a modern or mixed age classification, and had depths to their top perforations <100 ft (30 m). Geochemical data are consistent with partial denitrification of nitrate in some reducing groundwaters in the terminal and deeper parts of the flow system. High and moderate relative-concentrations of arsenic may be attributed to reductive dissolution of manganese or iron oxides, or to desorption or inhibition of arsenic sorption under alkaline conditions. Arsenic concentrations increased with increasing depth and groundwater age in the North San Francisco Bay study unit. High to moderate relative-concentrations of boron were primarily associated with hydrothermal activity or high-salinity waters in the Napa Sonoma lowlands. Simazine was detected in groundwater classified as modern and mixed age more often than in groundwater classified as pre-modern age, while chloroform was detected most often in groundwater classified as mixed age. Simazine and chloroform also were observed in wells that had surrounding land use classified as agricultural or land use classified as urban, and top of perforation depths less than 100 ft (30 m). Together, the occurrence of chloroform and simazine in shallow wells with modern or mixed groundwater located in urban or agricultural areas suggests that these constituents result from anthropogenic activities during the last 50 years. Tritium, helium-isotope, and carbon-14 data were used to classify the predominant age of groundwater samples into three categories: modern (water that has entered the aquifer in the last 50 years), pre-modern (water that entered the aquifer more than 50 years to tens of thousands of years ago), and mixed (mixtures of modern- and pre-modern-age waters). Arsenic, iron, and total dissolved solids (TDS) concentrations were significantly greater in groundwater having pre-modern-age classification than modern, suggesting that these constituents accumulate with groundwater residence time.

California↗

USGS1982

Recommended procedures and techniques for the petrographic description of bituminous coals

Modern coal petrology requires rapid and precise description of great numbers of coal core or bench samples in order to acquire the information required to understand and predict vertical and lateral variation of coal quality for correlation with coal-bed thickness, depositional environment, suitability for technological uses, etc. Procedures for coal description vary in accordance with the objectives of the description. To achieve our aim of acquiring the maximum amount of quantitative information within the shortest period of time, we have adopted a combined megascopic-microscopic procedure. Megascopic analysis is used to identify the distinctive lithologies present, and microscopic analysis is required only to describe representative examples of the mixed lithologies observed. This procedure greatly decreases the number of microscopic analyses needed for adequate description of a sample. For quantitative megascopic description of coal microlithotypes, microlithotype assemblages, and lithotypes, we use (V) for vitrite or vitrain, (E) for liptite, (I) for inertite or fusain, (M) for mineral layers or lenses other than iron sulfide, (S) for iron sulfide, and (X 1 ), (X 2 ), etc. for mixed lithologies. Microscopic description is expressed in terms of V representing the vitrinite maceral group, E the exinite group, I the inertinite group, and M mineral components. volume percentages are expressed as subscripts. Thus (V) 20 (V 80 E 10 I 5 M 5 ) 80 indicates a lithotype or assemblage of microlithotypes consisting of 20 vol. % vitrite and 80% of a mixed lithology having a modal maceral composition V 80 E 10 I 5 M 5 . This bulk composition can alternatively be recalculated and described as V 84 E 8 I 4 M 4 . To generate these quantitative data rapidly and accurately, we utilize an automated image analysis system (AIAS). Plots of VEIM data on easily constructed ternary diagrams provide readily comprehended illustrations of the range of modal composition of the lithologic units making up a given coal bed. The use of bulk-specific-gravity determinations is alo recommended for identification and characterization of the distinctive lithologic units. The availability of an AIAS also enhances the capability to acquire textural information. Ranges of size of maceral and mineral grains can be quickly and precisely determined by use of an AIAS. We assume that shape characteristics of coal particles can also be readily evaluated by automated image analysis, although this evaluation has not yet been attempted in our laboratory. Definitive data on the particulate mineral content of coal constitute another important segment of petrographic description. Characterization of mineral content may be accomplished by optical identification, electron microprobe analysis, X-ray diffraction, and scanning and transmission electron microscopy. Individual mineral grains in place in polished blocks or polished this sections, or separated from the coal matrix by sink-float methods are studied by analytical techniques appropriate to the conditions of sampling.

International Journal of Coal Geology↗

USGS2014

Status and understanding of groundwater quality in the South Coast Interior groundwater basins, 2008: California GAMA Priority Basin Project

Groundwater quality in the approximately 653-square-mile (1,691-square-kilometer) South Coast Interior Basins (SCI) study unit was investigated as part of the Priority Basin Project of the Groundwater Ambient Monitoring and Assessment (GAMA) Program. The South Coast Interior Basins study unit contains eight priority groundwater basins grouped into three study areas, Livermore, Gilroy, and Cuyama, in the Southern Coast Ranges hydrogeologic province. The GAMA Priority Basin Project is being conducted by the California State Water Resources Control Board in collaboration with the U.S. Geological Survey (USGS) and the Lawrence Livermore National Laboratory. The GAMA South Coast Interior Basins study was designed to provide a spatially unbiased assessment of untreated (raw) groundwater quality within the primary aquifer system, as well as a statistically consistent basis for comparing water quality between basins. The assessment was based on water-quality and ancillary data collected by the USGS from 50 wells in 2008 and on water-quality data from the California Department of Public Health (CDPH) database. The primary aquifer system was defined by the depth intervals of the wells listed in the CDPH database for the SCI study unit. The quality of groundwater in the primary aquifer system may be different from that in the shallower or deeper water-bearing zones; shallow groundwater may be more vulnerable to surficial contamination. The first component of this study, the status of the current quality of the groundwater resource, was assessed by using data from samples analyzed for volatile organic compounds (VOCs), pesticides, and naturally occurring inorganic constituents, such as trace elements and minor ions. This status assessment is intended to characterize the quality of groundwater resources within the primary aquifer system of the SCI study unit, not the treated drinking water delivered to consumers by water purveyors. Relative-concentrations (sample concentration divided by the health- or aesthetic-based benchmark concentration) were used for evaluating groundwater quality for those constituents that have Federal or California regulatory or non-regulatory benchmarks for drinking-water quality. A relative-concentration greater than 1.0 indicates a concentration greater than a benchmark, and a relative-concentration less than or equal to 1.0 indicates a concentration equal to or less than a benchmark. Relative-concentrations of organic constituents and special-interest constituents were classified as “high” (relative-concentration greater than 1.0), “moderate” (relative-concentration greater than 0.1 and less than or equal to 1.0), or “low” (relative-concentration less than or equal to 0.1). Relative-concentrations of inorganic constituents were classified as “high” (relative-concentration greater than 1.0), “moderate” (relative-concentration greater than 0.5 and less than or equal to 1.0), or “low” (relative-concentration less than or equal to 0.5). Aquifer-scale proportion was used as the primary metric in the status assessment for evaluating regional-scale groundwater quality. High aquifer-scale proportion is defined as the percentage of the area of the primary aquifer system with a relative-concentration greater than 1.0 for a particular constituent or class of constituents; percentage is based on an areal rather than a volumetric basis. Moderate and low aquifer-scale proportions were defined as the areal percentage of the primary aquifer system with moderate and low relative-concentrations, respectively. Two statistical approaches—grid-based and spatially weighted—were used to evaluate aquifer-scale proportions for individual constituents and classes of constituents. Grid-based and spatially weighted estimates were comparable in the SCI study unit (within 90-percent confidence intervals). Inorganic constituents (one or more) with health-based benchmarks were detected at high relative-concentrations in 29 percent of the primary aquifer system, at moderate relative-concentrations in 37 percent, and at low relative-concentrations in 34 percent. High aquifer-scale proportions of inorganic constituents primarily reflected high aquifer-scale proportions of nitrate (14 percent), boron (8.6 percent), molybdenum (8.6 percent), and arsenic (5.7 percent). In contrast, the relative-concentrations of organic constituents (one or more) were high in 1.6 percent, moderate in 2.0 percent, and low or not detected in 96 percent of the primary aquifer system. Of the 207 organic and special-interest constituents analyzed for, 15 constituents were detected. Perchlorate was found at moderate relative-concentrations in 34 percent of the aquifer. Two organic constituents were frequently detected (in greater than 10 percent of samples): the trihalomethane chloroform and the herbicide simazine. The second component of this study, the understanding assessment, identified natural and human factors that may have affected groundwater quality by evaluating land use, physical characteristics of the wells, and geochemical conditions of the aquifer. This evaluation was done by using statistical tests of correlations between these potential explanatory factors and water-quality data. Concentrations of arsenic, molybdenum, and manganese were generally greater in anoxic and pre-modern groundwater than other groundwater. In contrast, concentrations of nitrate and perchlorate were significantly higher in oxic and modern groundwater. Concentrations of simazine were greater in modern than pre-modern groundwater. Chloroform detections were positively correlated with greater urban land use. Boron concentrations and chloroform detections were higher in the Livermore study area than in the other study areas of the SCI; total dissolved solids and sulfate concentrations were greater in the Cuyama study area.

California↗

USGS2011

Status and understanding of groundwater quality in the San Diego Drainages Hydrogeologic Province, 2004: California GAMA Priority Basin Project

Groundwater quality in the approximately 3,900-square-mile (mi 2 ) San Diego Drainages Hydrogeologic Province (hereinafter San Diego) study unit was investigated from May through July 2004 as part of the Priority Basin Project of the Groundwater Ambient Monitoring and Assessment (GAMA) Program. The study unit is located in southwestern California in the counties of San Diego, Riverside, and Orange. The GAMA Priority Basin Project is being conducted by the California State Water Resources Control Board in collaboration with the U.S. Geological Survey (USGS) and the Lawrence Livermore National Laboratory. The GAMA San Diego study was designed to provide a statistically robust assessment of untreated-groundwater quality within the primary aquifer systems. The assessment is based on water-quality and ancillary data collected by the USGS from 58 wells in 2004 and water-quality data from the California Department of Public Health (CDPH) database. The primary aquifer systems (hereinafter referred to as the primary aquifers) were defined by the depth interval of the wells listed in the California Department of Public Health (CDPH) database for the San Diego study unit. The San Diego study unit consisted of four study areas: Temecula Valley (140 mi 2 ), Warner Valley (34 mi 2 ), Alluvial Basins (166 mi 2 ), and Hard Rock (850 mi 2 ). The quality of groundwater in shallow or deep water-bearing zones may differ from that in the primary aquifers. For example, shallow groundwater may be more vulnerable to surficial contamination than groundwater in deep water-bearing zones. This study had two components: the status assessment and the understanding assessment. The first component of this study-the status assessment of the current quality of the groundwater resource-was assessed by using data from samples analyzed for volatile organic compounds (VOC), pesticides, and naturally occurring inorganic constituents, such as major ions and trace elements. The status assessment is intended to characterize the quality of groundwater resources within the primary aquifers of the San Diego study unit, not the treated drinking water delivered to consumers by water purveyors. The second component of this study-the understanding assessment-identified the natural and human factors that affect groundwater quality by evaluating land use, well construction, and geochemical conditions of the aquifer. Results from these evaluations were used to help explain the occurrence and distribution of selected constituents in the study unit. Relative-concentrations (sample concentration divided by benchmark concentration) were used as the primary metric for relating concentrations of constituents in groundwater samples to water-quality benchmarks for those constituents that have Federal and (or) California benchmarks. For organic and special-interest constituents, relative-concentrations were classified as high (> 1.0), moderate (> 0.1 and ≤1.0), and low (≤0.1). For inorganic constituents, relative concentrations were classified as high (> 1.0), moderate (> 0.5 and ≤1.0), and low (≤0.5). Grid-based and spatially weighted approaches were then used to evaluate the proportion of the primary aquifers (aquifer-scale proportions) with high, moderate, and low relative-concentrations for individual compounds and classes of constituents. One or more of the inorganic constituents with health-based benchmarks were high (relative to those benchmarks) in 17.6 percent of the primary aquifers in the Temecula Valley, Warner Valley, and Alluvial Basins study areas (hereinafter also collectively referred to as the Alluvial Fill study areas because they are composed of alluvial fill aquifers), and in 25.0 percent of the Hard Rock study area. Inorganic constituents with health-based benchmarks that were frequently detected at high relative-concentrations included vanadium (V), arsenic (As), and boron (B). Vanadium and As concentrations were not significantly correlated to either urban or agricultural land use indicating natural sources as the primary contributors of these constituents to groundwater. The positive correlation of B concentration to urban land-use was significant which indicates that anthropogenic activities are a contributing source of B to groundwater. The correlation of V, As and B concentrations to pH was positive, indicating that in alkaline groundwater these constituents are being desorbed from, or being inhibited from adsorbing to, particle surfaces. Inorganic constituents with aesthetic benchmarks that were detected at high relative-concentrations include manganese (Mn), iron (Fe), and total dissolved solids (TDS). In the Alluvial Fill study areas, Mn and TDS were detected at high relative-concentrations in 13.7 percent of the primary aquifers, and Fe in 6.9 percent. In the Hard Rock study area, Mn was detected at high relative-concentrations in 33.3 percent of the primary aquifers, and TDS in 16.7 percent; Fe was not detected at high relative-concentrations. Total dissolved solids concentrations were significantly correlated to agricultural land use suggesting that agricultural practices are a contributing source of TDS to groundwater. Manganese and Fe concentrations were highest in groundwater with low dissolved oxygen and pH indicating that the reductive dissolution of oxyhydroxides may be an important mechanism for the mobilization of Mn and Fe in groundwater. TDS concentrations were highest in shallow wells and in modern (< 50 yrs) groundwater which indicates anthropogenic activities as a source of TDS concentrations in groundwater. The relative-concentrations of organic constituents with health-based benchmarks were high in 3.0 percent of the primary aquifers in the Alluvial Fill study areas. A single detection in the Alluvial Basins study area of the discontinued gasoline oxygenate methyl tert-butyl ether (MTBE) was the only organic constituent detected at a high relative-concentration; high relative-concentrations of these constituents were not detected in the Hard Rock study area. Twelve of 88 VOCs and 14 of 123 pesticides and pesticide degradates analyzed in grid wells were detected. Chloroform was the only VOC detected in more than 10 percent of the grid wells. The herbicides simazine, atrazine, and prometon were each detected in greater than 10 percent of the grid wells. Perchlorate was detected in 22 percent of the grid wells sampled. The understanding assessment showed a significant correlation of trihalomethanes (THMs) and solvents to urban land-use, indicating that detections of these constituents are more likely to occur in groundwater underlying urbanized areas of the study unit. MTBE concentrations were negatively correlated to the distance from the nearest leaking underground fuel tank, indicating that point sources are the most significant contributing factor for MTBE concentrations to groundwater in the study unit. The positive correlation of THM and herbicide concentrations to modern groundwater was significant, as was the negative correlation of herbicide concentrations to pH and anoxic groundwater. The negative correlation of herbicides to pH and anoxic groundwater was likely due to the fact that these constituents were detected more frequently in shallow wells where groundwater conditions tend to be oxic with relatively low pH.

California↗

USGS2011

Groundwater quality of the Gulf Coast aquifer system, Houston, Texas, 2010

During March–December 2010, the U.S. Geological Survey, in cooperation with the city of Houston, collected source-water samples from 60 municipal supply wells in the Houston area. These data were collected as part of an ongoing study to determine concentrations, spatial extent, and associated geochemical conditions that might be conducive for mobility and transport of selected naturally occurring contaminants (selected trace elements and radionuclides) in the Gulf Coast aquifer system in the Houston area. In the summers of 2007 and 2008, a reconnaissance-level survey of these constituents in untreated water from 28 municipal supply wells was completed in the Houston area. Included in this report are the complete analytical results for 47 of the 60 samples collected in 2010—those results which were received from the laboratories and reviewed by the authors as of December 31, 2010. All of the wells sampled were screened in the Gulf Coast aquifer system; 22 were screened entirely in the Evangeline aquifer, and the remaining 25 wells contained screened intervals that intersected both Evangeline and Chicot aquifers. The data documented in this report were collected as part of an ongoing study to characterize source-water-quality conditions in untreated groundwater prior to drinking-water treatment. An evaluation of contaminant occurrence in source water provides background information regarding the presence of a contaminant in the environment. Because source-water samples were collected prior to any treatment or blending that potentially could alter contaminant concentrations, the water-quality results documented by this report represent the quality of the source water, not the quality of finished drinking water provided to the public. Samples were analyzed for major ions (calcium, magnesium, potassium, sodium, bromide, chloride, fluoride, silica, and sulfate), residue on evaporation (dissolved solids), trace elements (arsenic, barium, boron, chromium, iron, lithium, manganese, molybdenum, selenium, strontium, and vanadium), and selected radionuclides (gross alpha- and beta-particle activity [at 72 hours and 30 days], carbon-14, radium-226, radon-222, and uranium). Field measurements were made of selected physicochemical (relating to both physical and chemical) properties (oxidation-reduction potential, turbidity, dissolved-oxygen concentration, pH, specific conductance, water temperature, and alkalinity) and unfiltered sulfides. Similar to the results from the reconnaissance survey, physicochemical properties, major ions, and trace elements varied considerably. The ranges of selected physicochemical properties were as follows: oxidation-reduction potential ranged from -173 to 466 millivolts, dissolved oxygen ranged from less than 0.1 to 4.4 milligrams per liter, pH ranged from 7.2 to 7.8, specific conductance ranged from 439 to 724 microsiemens per centimeter at 25 degrees Celsius, and alkalinity ranged from 159 to 276 milligrams per liter as calcium carbonate. The largest ranges in concentration for filtered major ion constituents were obtained for cations sodium and calcium and for anions chloride and sulfate. Arsenic concentrations measured in samples from the 47 wells ranged from 1.6 to 23.5 micrograms per liter. The maximum concentration of arsenic (23.5 micrograms per liter) was measured in the source-water sample from well LJ-65-12-328. Quantifiable concentrations of barium, boron, lithium, molybdenum, and strontium were measured in all 47 filtered, source-water samples. Quantifiable concentrations of manganese were measured in 46 source-water samples, and an estimated concentration of manganese was measured in 1 sample. Chromium, iron, selenium, and vanadium were detected in 24 or more of the 47 source-water samples. Gross alpha-particle activities and beta-particle activities for all 47 samples were analyzed at 72 hours after sample collection and again at 30 days after sample collection, allowing for the measurement of the activity of short-lived isotopes. Gross alpha-particle activities reported in this report were not adjusted for activity contributions by radon or uranium and, therefore, are conservatively high estimates if compared to the U.S. Environmental Protection Agency National Primary Drinking Water Regulation for adjusted gross alpha-particle activity. The gross alpha-particle activities at 30 days in the samples ranged from R0.60 to 25.5 picocuries per liter and at 72 hours ranged from 2.58 to 39.7 picocuries per liter, and the "R" preceding the value of 0.60 picocuries per liter refers to a nondetected result less than the sample-specific critical level. Gross beta-particle activities measured at 30 days ranged from 1.17 to 14.4 picocuries per liter and at 72 hours ranged from 1.97 to 4.4 picocuries per liter. Filtered uranium was detected in quantifiable amounts in all of the 47 wells sampled. The uranium concentrations ranged from 0.03 to 42.7 micrograms per liter. One sample was analyzed for carbon-14, and the amount of modern atmospheric carbon was reported as 0.2 percent. Six source-water samples collected from municipal supply wells were analyzed for radium-226, and all of the concentrations were considered detectable concentrations (greater than their associated sample-specific critical level). Three source-water samples collected were analyzed for radon-222, and all of the concentrations were substantially greater than the associated sample-specific critical level.

Texas↗

USGS2005

Questa baseline and pre-mining ground-water quality investigation. 14. Interpretation of ground-water geochemistry in catchments other than the Straight Creek catchment, Red River Valley, Taos County, New Mexico, 2002-2003

The U.S. Geological Survey, in cooperation with the New Mexico Environment Department, is investigating the pre-mining ground-water chemistry at the Molycorp molybdenum mine in the Red River Valley, New Mexico. The primary approach is to determine the processes controlling ground-water chemistry at an unmined, off-site but proximal analog. The Straight Creek catchment, chosen for this purpose, consists of the same Tertiary-age quartz-sericite-pyrite altered andesite and rhyolitic volcanics as the mine site. Straight Creek is about 5 kilometers east of the eastern boundary of the mine site. Both Straight Creek and the mine site are at approximately the same altitude, face south, and have the same climatic conditions. Thirteen wells in the proximal analog drainage catchment were sampled for ground-water chemistry. Eleven wells were installed for this study and two existing wells at the Advanced Waste-Water Treatment (AWWT) facility were included in this study. Eight wells were sampled outside the Straight Creek catchment: one each in the Hansen, Hottentot, and La Bobita debris fans, four in a well cluster in upper Capulin Canyon (three in alluvial deposits and one in bedrock), and an existing well at the U.S. Forest Service Questa Ranger Station in Red River alluvial deposits. Two surface waters from the Hansen Creek catchment and two from the Hottentot drainage catchment also were sampled for comparison to ground-water compositions. In this report, these samples are evaluated to determine if the geochemical interpretations from the Straight Creek ground-water geochemistry could be extended to other ground waters in the Red River Valley , including the mine site. Total-recoverable major cations and trace metals and dissolved major cations, selected trace metals, anions, alkalinity; and iron-redox species were determined for all surface- and ground-water samples. Rare-earth elements and low-level As, Bi, Mo, Rb, Re, Sb, Se, Te, Th, U, Tl, V, W, Y, and Zr were determined on selected samples. Dissolved organic carbon (DOC), mercury, sulfate stable isotope composition (δ 34 S and δ 18 O of sulfate), stable isotope composition of water (δ 2 H and δ 18 O of water) were measured for selected samples. Chlorofluorocarbons (CFC) and 3 He and 3 H were measured for age dating on selected samples. Linear regressions from the Straight Creek ground-water data were used to compare ground-water chemistry trends in non-Straight Creek ground waters with Straight Creek alluvial ground-water chemistry dilution trends. Most of the solute trends for the ground waters are similar to those for Straight Creek but there are some notable exceptions. In lithologies that contain substantial pyrite mineralization, acid waters form with similar chemistries to those in Straight Creek and all the waters tend to be calcium-sulfate type. Hottentot ground waters contain substantially lower calcium concentrations relative to those in Straight Creek. This anomaly results from the exposure of rhyolite porphyry in the Hottentot scar and weathering zone. The rhyolite contains less calcium than the altered andesites and tuffs in the Straight Creek catchment and probably does not have the abundant gypsum and calcite. The Hansen ground waters have reached gypsum saturation and have similar calcium, magnesium, and beryllium concentrations as Straight Creek ground waters but have lower concentrations of fluoride, manganese, zinc, cobalt, nickel, copper, and lithium. Lower concentrations of elements related to mineralization at Hansen likely reflect the more distal location of Hansen with respect to intrusive centers that provided the heat source for hydrothermal alteration. The other ground water with water chemistry trends that are outside the Straight Creek trends was from an alluvial well from Capulin Canyon (CC2A). Although it had pH values near 6.0 and most major ions similar to the other Capulin Canyon ground waters, it contained high concentrations of fluoride, manganese, aluminum, iron, beryllium, and zinc similar to a mineralized zone and had low alkalinity. Saturation indices indicate that solubility constraints continue to provide upper limits on some solute concentrations. Siderite, ferrihydrite, calcite, gypsum, rhodochrosite, and barite provide limits for concentrations of Fe(II), Fe(III), Ca, Mn, and Ba, respectively. Beryllium concentrations may be subject to an upper concentration limit by the solubility of Be(OH) 2 but these concentrations probably are not reached in the ground waters. Ground-water isotopic data were consistent with the meteoric water line estimated for precipitation in the Red River Valley, indicating that all the ground waters examined in this study were meteoric, recent in origin, and showed no substantial indication of evaporation. Tritium-helium-3 and chlorofluorocarbon (CFC) age dating were partially successful. Generally, dates were consistent with location and depth of wells. Two samples had good agreement between CFC dates and tritium-helium dates, whereas a third reflected either substantial mixing with younger or older waters or complications arising from excess helium-4. The well at La Bobita appeared to contain a large component of modern water, most likely as a result of mixing with water from Red River alluvial deposits.

New Mexico↗

USGS2008

The ancestral cascades arc: Cenozoic evolution of the central Sierra Nevada (California) and the birth of the new plate boundary

We integrate new stratigraphic, structural, geochemical, geochronological, and magnetostratigraphic data on Cenozoic volcanic rocks in the central Sierra Nevada to arrive at closely inter-related new models for: (1) the paleogeography of the ancestral Cascades arc, (2) the stratigraphic record of uplift events in the Sierra Nevada, (3) the tectonic controls on volcanic styles and compositions in the arc, and (4) the birth of a new plate margin. Previous workers have assumed that the ancestral Cascades arc consisted of stratovolcanoes, similar to the modern Cascades arc, but we suggest that the arc was composed largely of numerous, very small centers, where magmas frequently leaked up strands of the Sierran frontal fault zone. These small centers erupted to produce andesite lava domes that collapsed to produce block-and-ash flows, which were reworked into paleocanyons as volcanic debris flows and streamflow deposits. Where intrusions rose up through water-saturated paleocanyon fill, they formed peperite complexes that were commonly destabilized to form debris flows. Paleocanyons that were cut into Cretaceous bedrock and filled with Oligocene to late Miocene strata not only provide a stratigraphic record of the ancestral Cascades arc volcanism, but also deep unconformities within them record tectonic events. Preliminary correlation of newly mapped unconformities and new geochronological, magnetostratigraphic, and structural data allow us to propose three episodes of Cenozoic uplift that may correspond to (1) early Miocene onset of arc magmatism (ca. 15 Ma), (2) middle Miocene onset of Basin and Range faulting (ca. 10 Ma), and (3) late Miocene arrival of the triple junction (ca. 6 Ma), perhaps coinciding with a second episode of rapid extension on the range front. Oligocene ignimbrites, which erupted from calderas in central Nevada and filled Sierran paleocanyons, were deeply eroded during the early Miocene uplift event. The middle Miocene event is recorded by growth faulting and landslides in hanging-wall basins of normal faults. Cessation of andesite volcanism closely followed the late Miocene uplift event. We show that the onset of Basin and Range faulting coincided both spatially and temporally with eruption of distinctive, very widespread, high-K lava flows and ignimbrites from the Little Walker center (Stanislaus Group). Preliminary magnetostratigraphic work on high-K lava flows (Table Mountain Latite, 10.2 Ma) combined with new 40 Ar/ 39 Ar age data allow regional-scale correlation of individual flows and estimates of minimum (28,000 yr) and maximum (230,000 yr) time spans for eruption of the lowermost latite series. This work also verifies the existence of reversed-polarity cryptochron, C5n.2n-1 at ca. 10.2 Ma, which was previously known only from seafloor magnetic anomalies. High-K volcanism continued with eruption of the three members of the Eureka Valley Tuff (9.3-9.15 Ma). In contrast with previous workers in the southern Sierra, who interpret high-K volcanism as a signal of Sierran root delamination, or input of subduction-related fluids, we propose an alternative model for K 2 O-rich volcanism. A regional comparison of central Sierran volcanic rocks reveals their K 2 O levels to be intermediate between Lassen to the north (low in K 2 O) and ultrapotassic volcanics in the southern Sierra. We propose that this shift reflects higher pressures of fractional crystallization to the south, controlled by a southward increase in the thickness of the granitic crust. At high pressures, basaltic magmas precipitate clinopyroxene (over olivine and plagioclase) at their liquidus; experiments and mass-balance calculations show that clinopyroxene fractionation buffers SiO 2 to low values while allowing K 2 O to increase. A thick crust to the south would also explain the sparse volcanic cover in the southern Sierra compared to the extensive volcanic cover to the north.

Special Paper of the Geological Society of America↗

USGS2014

Status and understanding of groundwater quality in the Klamath Mountains study unit, 2010: California GAMA Priority Basin Project

Groundwater quality in the Klamath Mountains (KLAM) study unit was investigated as part of the Priority Basin Project of the California Groundwater Ambient Monitoring and Assessment (GAMA) Program. The study unit is located in Del Norte, Humboldt, Shasta, Siskiyou, Tehama, and Trinity Counties. The GAMA Priority Basin Project is being conducted by the California State Water Resources Control Board in collaboration with the U.S. Geological Survey (USGS) and the Lawrence Livermore National Laboratory. The GAMA Priority Basin Project was designed to provide a spatially unbiased, statistically robust assessment of the quality of untreated (raw) groundwater in the primary aquifer system. The assessment is based on water-quality data and explanatory factors for groundwater samples collected in 2010 by the USGS from 39 sites and on water-quality data from the California Department of Public Health (CDPH) water-quality database. The primary aquifer system was defined by the depth intervals of the wells listed in the CDPH water-quality database for the KLAM study unit. The quality of groundwater in the primary aquifer system may be different from that in the shallower or deeper water-bearing zones; shallow groundwater may be more vulnerable to surficial contamination. This study included two types of assessments: (1) a status assessment , which characterized the status of the current quality of the groundwater resource by using data from samples analyzed for volatile organic compounds, pesticides, and naturally occurring inorganic constituents, such as major ions and trace elements, and (2) an understanding assessment , which evaluated the natural and human factors potentially affecting the groundwater quality. The assessments were intended to characterize the quality of groundwater resources in the primary aquifer system of the KLAM study unit, not the quality of treated drinking water delivered to consumers by water purveyors. Relative-concentrations (sample concentrations divided by the health- or aesthetic-based benchmark concentrations) were used for evaluating groundwater quality for those constituents that have Federal or California regulatory or non-regulatory benchmarks for drinking-water quality. A relative-concentration greater than (>) 1.0 indicates a concentration greater than a benchmark, and a relative-concentration less than or equal to (≤) 1.0 indicates a concentration less than or equal to a benchmark. Relative-concentrations of organic constituents were classified as “high” (relative-concentration > 1.0), “moderate” (0.1 < relative-concentration ≤ 1.0), or “low” (relative-concentration ≤ 0.1). For inorganic constituents, the boundary between low and moderate relative-concentration was set at 0.5. Aquifer-scale proportion was used in the status assessment as the primary metric for evaluating regional-scale groundwater quality. High aquifer-scale proportion is defined as the percentage of the area of the primary aquifer system with a relative-concentration greater than 1.0 for a particular constituent or class of constituents; percentage is based on an areal rather than a volumetric basis. Moderate and low aquifer-scale proportions were defined as the percentages of the primary aquifer system with moderate and low relative-concentrations, respectively. The KLAM study unit includes more than 8,800 square miles (mi 2 ), but only those areas near the sampling sites, about 920 mi 2 , are included in the areal assessment of the study unit. Two statistical approaches—grid-based and spatially weighted—were used to evaluate aquifer-scale proportions for individual constituents and classes of constituents. To confirm this methodology, 90 percent confidence intervals were calculated for the grid-based high aquifer-scale proportions and were compared to the spatially weighted results, which were found to be within these confidence intervals in all cases. Grid-based results were selected for use in the status assessment unless, as was observed in a few cases, a grid-based result was zero and the spatially weighted result was not zero, in which case, the spatially weighted result was used. The status assessment showed that inorganic constituents with human-health benchmarks were detected at high relative-concentrations in 2.6 percent of the primary aquifer system and at moderate relative-concentrations in 10 percent of the system. The high aquifer-scale proportion for inorganic constituents mainly reflected the high aquifer-scale proportions of boron. Inorganic constituents with secondary maximum contaminant levels were detected at high relative-concentrations in 13 percent of the primary aquifer system and at moderate relative-concentrations in 10 percent of the system. The constituents present at high relative-concentrations included iron and manganese. Organic constituents with human-health benchmarks were not detected at high relative-concentrations, but were detected at moderate relative-concentrations in 1.9 percent of the primary aquifer system. The 1.9 percent reflected a spatially weighted moderate aquifer-scale proportion for the gasoline additive methyl tert-butyl ether. Of the 148 organic constituents analyzed, 14 constituents were detected. Only one organic constituent had a detection frequency of greater than 10 percent—the trihalomethane, chloroform. The second component of this study, the understanding assessment , identified the natural and human factors that may have affected the groundwater quality in the KLAM study unit by evaluating statistical correlations between water-quality constituents and potential explanatory factors. The potential explanatory factors evaluated were aquifer lithology, land use, hydrologic conditions, depth, groundwater age, and geochemical conditions. Results of the statistical evaluations were used to explain the occurrence and distribution of constituents in the KLAM study unit. Groundwater age distribution (modern, mixed, or pre-modern), redox class (oxic, mixed, or anoxic), and dissolved oxygen concentration were the explanatory factors that best explained occurrence patterns of the inorganic constituents. High concentrations of boron were found to be associated with groundwater classified as mixed or pre-modern with respect to groundwater age. Boron was also negatively correlated to dissolved oxygen and positively correlated to specific conductance. Iron and manganese concentrations were strongly associated with low dissolved oxygen concentrations, anoxic and mixed redox classifications, and pre-modern groundwater. Specific conductance concentrations were found to be related to pre-modern groundwater, low dissolved oxygen concentrations, and high pH. Chloroform was selected for additional evaluation in the understanding assessment because it was detected in more than 10 percent of wells sampled in the KLAM study unit. Septic tank density was the only explanatory factor that was found to relate to chloroform concentrations.

California↗

USGS2011

Status and understanding of groundwater quality in the Monterey Bay and Salinas Valley Basins, 2005-California GAMA Priority Basin Project

Groundwater quality in the approximately 1,000 square mile (2,590 km2) Monterey Bay and Salinas Valley Basins (MS) study unit was investigated as part of the Priority Basin Project of the Groundwater Ambient Monitoring and Assessment (GAMA) Program. The study unit is located in central California in Monterey, Santa Cruz, and San Luis Obispo Counties. The GAMA Priority Basin Project is being conducted by the California State Water Resources Control Board in collaboration with the U.S. Geological Survey (USGS) and the Lawrence Livermore National Laboratory. The GAMA MS study was designed to provide a spatially unbiased assessment of the quality of untreated (raw) groundwater in the primary aquifer systems (hereinafter referred to as primary aquifers). The assessment is based on water-quality and ancillary data collected in 2005 by the USGS from 97 wells and on water-quality data from the California Department of Public Health (CDPH) database. The primary aquifers were defined by the depth intervals of the wells listed in the CDPH database for the MS study unit. The quality of groundwater in the primary aquifers may be different from that in the shallower or deeper water-bearing zones; shallow groundwater may be more vulnerable to surficial contamination. The first component of this study, the status of the current quality of the groundwater resource, was assessed by using data from samples analyzed for volatile organic compounds (VOC), pesticides, and naturally occurring inorganic constituents, such as major ions and trace elements. This status assessment is intended to characterize the quality of groundwater resources in the primary aquifers of the MS study unit, not the treated drinking water delivered to consumers by water purveyors. Relative-concentrations (sample concentration divided by the health- or aesthetic-based benchmark concentration) were used for evaluating groundwater quality for those constituents that have Federal and (or) California regulatory or non-regulatory benchmarks for drinking-water quality. A relative-concentration greater than (>) 1.0 indicates a concentration greater than a benchmark, and less than or equal to (≤) 1.0 indicates a concentration less than or equal to a benchmark. Relative-concentrations of organic and special interest constituents [perchlorate, N-nitrosodimethylamine (NDMA), and 1,2,3-trichloropropane (1,2,3-TCP)], were classified as "high" (relative-concentration > 1.0), "moderate" (0.1 < relative-concentration ≤ 1.0), or "low" (relative-concentration ≤ 0.1). Relative-concentrations of inorganic constituents were classified as "high" (relative-concentration > 1.0), "moderate" (0.5 < relative-concentration ≤ 1.0), or "low" (relative-concentration ≤ 0.5). Aquifer-scale proportion was used as the primary metric in the status assessment for evaluating regional-scale groundwater quality. High aquifer-scale proportion was defined as the percentage of the area of the primary aquifers with a relative-concentration greater than 1.0 for a particular constituent or class of constituents; percentage is based on an areal rather than a volumetric basis. Moderate and low aquifer-scale proportions were defined as the percentage of the primary aquifers with moderate and low relative-concentrations, respectively. Two statistical approaches-grid-based and spatially weighted-were used to evaluate aquifer-scale proportions for individual constituents and classes of constituents. Grid-based and spatially-weighted estimates were comparable in the MS study unit (within 90-percent confidence intervals). Inorganic constituents with human-health benchmarks were detected at high relative-concentrations in 14.5 percent of the primary aquifers, moderate in 35.5 percent, and low in 50.0 percent. High aquifer-scale proportion of inorganic constituents primarily reflected high aquifer-scale proportions of nitrate (7.9 percent), molybdenum (2.9 percent), arsenic (2.8 percent), boron (1.9 percent), and gross alpha-beta radioactivity (1.5 percent). Relative-concentrations of organic constituents (one or more) were high in 0.2 percent, moderate in 6.6 percent, and low in 93.2 percent (not detected in 48.1 percent) of the primary aquifers. The high aquifer-scale proportion of organic constituents primarily reflected high aquifer-scale proportions of tetrachloroethene (0.1 percent) and methyl tert-butyl ether (0.1 percent). Relative-concentration for inorganic constituents with secondary maximum contaminant levels, manganese, total dissolved solids, iron, sulfate, and chloride were high in 18.6, 8.6, 7.1, 2.9, and 1.4 percent of the primary aquifers, respectively. Of the 205 organic and special-interest constituents analyzed, 32 constituents were detected. One organic constituent, the herbicide simazine, was frequently detected (in 10 percent or more of samples), but was detected at low relative-concentrations. The second component of this study, the understanding assessment, identified the natural and human factors that affect groundwater quality by evaluating land use, physical characteristics of the wells, and geochemical conditions of the aquifer. Results from these evaluations were used to explain the occurrence and distribution of constituents in the study unit. The understanding assessment indicated that most wells that contained nitrate were classified as being in agricultural land-use areas, and depths to the top of perforations in most of the wells were less than 350 ft (76 m). High and moderate relative-concentrations of arsenic may be attributed to reductive dissolution of manganese or iron oxides, or to desorption or inhibition of arsenic sorption under alkaline conditions. Arsenic concentrations increased with increasing groundwater depth and residence time (age). Simazine was detected more often in groundwater from wells with surrounding land use classified as agricultural or urban, and with top of perforation depths less than 200 ft (61 m), than in groundwater from wells with natural land use or with deeper depths. Tritium, helium-isotope, and carbon-14 data were used to classify the predominant age of groundwater samples into three categories: modern (water that has entered the aquifer since 1953), pre-modern (water that entered the aquifer prior to 1953 to tens of thousands of years ago), and mixed (mixtures of modern- and pre-modern-age waters). Arsenic concentrations were significantly greater in groundwater with pre-modern age classification than in groundwater with modern-age classification, suggesting that arsenic accumulates with groundwater residence time.

Scientific Investigations Report↗

USGS2012

Status and understanding of groundwater quality in the Tahoe-Martis, Central Sierra, and Southern Sierra study units, 2006-2007--California GAMA Priority Basin Project

Groundwater quality in the Tahoe-Martis, Central Sierra, and Southern Sierra study units was investigated as part of the Priority Basin Project of the California Groundwater Ambient Monitoring and Assessment (GAMA) Program. The three study units are located in the Sierra Nevada region of California in parts of Nevada, Placer, El Dorado, Madera, Tulare, and Kern Counties. The GAMA Priority Basin Project is being conducted by the California State Water Resources Control Board, in collaboration with the U.S. Geological Survey (USGS) and the Lawrence Livermore National Laboratory. The project was designed to provide statistically robust assessments of untreated groundwater quality within the primary aquifer systems used for drinking water. The primary aquifer systems (hereinafter, primary aquifers) for each study unit are defined by the depth of the screened or open intervals of the wells listed in the California Department of Public Health (CDPH) database of wells used for municipal and community drinking-water supply. The quality of groundwater in shallower or deeper water-bearing zones may differ from that in the primary aquifers; shallower groundwater may be more vulnerable to contamination from the surface. The assessments for the Tahoe-Martis, Central Sierra, and Southern Sierra study units were based on water-quality and ancillary data collected by the USGS from 132 wells in the three study units during 2006 and 2007 and water-quality data reported in the CDPH database. Two types of assessments were made: (1) status, assessment of the current quality of the groundwater resource, and (2) understanding, identification of the natural and human factors affecting groundwater quality. The assessments characterize untreated groundwater quality, not the quality of treated drinking water delivered to consumers by water purveyors. Relative-concentrations (sample concentrations divided by benchmark concentrations) were used for evaluating groundwater quality for those constituents that have Federal or California regulatory or non-regulatory benchmarks for drinking-water quality. A relative-concentration (RC) greater than (>) 1.0 indicates a concentration above a benchmark. RCs for organic constituents (volatile organic compounds and pesticides) and special-interest constituents were classified as "high" (RC > 1.0), "moderate" (1.0 ≥ RC > 0.1), or "low" (RC ≤ 0.1). For inorganic constituents (major ions, trace elements, nutrients, and radioactive constituents), the boundary between low and moderate RCs was set at 0.5. A new metric, aquifer-scale proportion, was used in the status assessment as the primary metric for evaluating regional-scale groundwater quality. High aquifer-scale proportion is defined as the percentage of the area of the primary aquifers with RC > 1.0 for a particular constituent or class of constituents; moderate and low aquifer-scale proportions are defined as the percentages of the area of the primary aquifer with moderate and low RCs, respectively. Percentages are based on an areal rather than a volumetric basis. Two statistical approaches—grid-based, which used one value per grid cell, and spatially weighted, which used multiple values per grid cell—were used to calculate aquifer-scale proportions for individual constituents and classes of constituents. The spatially weighted estimates of high aquifer-scale proportions were within the 90-percent (%) confidence intervals of the grid-based estimates in all cases. The status assessment showed that inorganic constituents had greater high and moderate aquifer-scale proportions than did organic constituents in all three study units. In the Tahoe-Martis study unit, RCs for inorganic constituents with health-based benchmarks (primarily arsenic) were high in 20% of the primary aquifer, moderate in 13%, and low in 67%. In the Central Sierra study unit, aquifer-scale proportions for inorganic constituents with health-based benchmarks (primarily arsenic, uranium, fluoride, and molybdenum) were 41% high, 36% moderate, and 23% low. In the Southern Sierra study unit, 32, 34, and 34% of the primary aquifer had high, moderate, and low RCs of inorganic constituents with health-based benchmarks (primarily arsenic, uranium, fluoride, boron, and nitrate). The high aquifer-scale proportions for inorganic constituents with non-health-based benchmarks were 14, 34, and 24% for the Tahoe-Martis, Central Sierra, and Southern Sierra study units, respectively, and the primary constituent was manganese for all three study units. Organic constituents with health-based benchmarks were not present at high RCs in the primary aquifers of the Central Sierra and Southern Sierra study units, and were present at high RCs in only 1% of the Tahoe-Martis study unit. Moderate aquifer-scale proportions for organic constituents were < 5% in all three study units. Of the 173 organic constituents analyzed, 22 were detected, and of those 22, 17 have health-based benchmarks. Organic constituents were detected in 20, 27, and 40% of the primary aquifers in the Tahoe-Martis, Central Sierra, and Southern Sierra study units, respectively. Four organic constituents had study-unit detection frequencies of > 10%: the trihalomethane chloroform in the Tahoe-Martis study unit; chloroform and the herbicide simazine in the Central Sierra study unit; and chloroform, simazine, the herbicide atrazine, and the solvent perchloroethene in the Southern Sierra study unit. The second component of this study, the understanding assessment, identified the natural and human factors that may have affected groundwater quality in the three study units by evaluating statistical correlations between water-quality constituents and potential explanatory factors. The potential explanatory factors evaluated were land use, septic tank density, climate, relative position in the regional flow system, aquifer lithology, geographic location, well depth and depth to the top of the screened or open interval in the well, groundwater age distribution, pH, and dissolved oxygen concentration. Results of the statistical evaluations were used to explain the occurrence and distribution of constituents in the study units. Aquifer lithology (granitic, metamorphic, sedimentary, or volcanic rocks), groundwater age distribution [modern (recharged since 1952), pre-modern (recharged before 1952), or mixed (containing both modern and pre-modern recharge)], geographic location, pH, and dissolved oxygen were the most significant factors explaining the occurrence patterns of most inorganic constituents. High and moderate RCs of arsenic were associated with pre-modern and mixed-age groundwater and two distinct sets of geochemical conditions: (1) oxic, high-pH conditions, particularly in volcanic rocks, and (2) low-oxygen to anoxic conditions and low- to neutral-pH conditions, particularly in granitic rocks. In granitic and metamorphic rocks, high and moderate RCs of uranium were associated with pre-modern and mixed-age groundwater, low-oxygen to anoxic conditions, and location within parts of the Central Sierra and Southern Sierra study units known to have rocks with anomalously high uranium content compared to other parts of the Sierra Nevada. High and moderate RCs of uranium in sedimentary rocks were associated with pre-modern-age groundwater, oxic and high-pH conditions, and location in the Tahoe Valley South subbasin within the Tahoe-Martis study unit. Land use within 500 meters of the well and groundwater age were the most significant factors explaining occurrence patterns of organic constituents. Herbicide detections were most strongly associated with modern- and mixed-age groundwater from wells with agricultural land use. Trihalomethane detections were most strongly associated with modern- and mixed-age groundwater from wells with > 10% urban land use and (or) septic tank density > 7 tanks per square kilometer. Solvent detections were not significantly related to groundwater age. Eighty-three percent of the wells with modern- or mixed-age groundwater, and 86% of wells with detections of herbicides and (or) THMs had depths to the top of the screened or open interval of < 170 feet. These observations suggest that modern groundwater has infiltrated to depths of approximately 170 feet below land surface. Land use and occurrence of herbicides and solvents were the most significant factors explaining the occurrence of nitrate. Wells with > 5% agricultural land use and detection of a herbicide or solvent had the highest nitrate concentrations. Comparison between observed and predicted detection frequencies of perchlorate suggests that the perchlorate detected at concentrations < 1 microgram per liter likely reflects the distribution of perchlorate under natural conditions, and that the perchlorate detected at higher concentrations may reflect redistribution of originally natural perchlorate salts by irrigation in the agricultural areas of the Southern Sierra study unit.

California↗

USGS1985

The plumbotectonics of the West Shasta mining district, eastern Klamath Mountains, California

The tectonic setting comprising the West Shasta mining district has often been compared with that of primitive island arcs. Concentrations of uranium, thorium, and lead and lead isotope compositions were determined for Devonian ores and rocks of the West Shasta district, eastern Klamath Mountains, California, to help evaluate the tectonic classification. The lead isotope pattern is found to be complex. From comparison of the data with those on younger ores and rocks in the region and with those isotopic patterns found in modern tectonic terranes, however, a number of conclusions are possible. A lead isotope point for the Devonian oceanic mantle is now well established from this study on the West Shasta district. This isotopic composition is in agreement with that suggested by Slawson in 1983--i.e., from a sample of massive sulfide ore from the Golinsky deposit--with a 206 Pb/ 204 Pb of 17.830, a 207 Pb/ 204 Pb of 15.450, and a 208 Pb/ 204 Pb of 37.313. If the Devonian mantle is analogous to the modern mantle, the determined value is probably at the more radiogenic end of the Devonian oceanic mantle array.Some samples of volcanic rocks and ores that have elevated values of 207 Pb/ 204 Pb and 208 Pb/ 204 Pb indicate that subducted pelagic sediments or interaction of the magmas with other sediments downsection have been involved to varying degrees in the generation of magmas. The high ratios were not attained by addition of lead to the volcanic rocks or ores during subsequent magmatic events, such as intrusion of the Permian Pit River stock to the east or of the Cretaceous Shasta Bally batholith that crops out to the south and west and may underlie part of the district. Some values of 207 Pb/ 204 Pb are sufficiently high as to suggest that West Shasta may have developed nearer a continent than was previously supposed. Lead isotope data for Quaternary volcanic rocks are somewhat more radiogenic than for Cretaceous ores and plutonic rocks. Permo-Triassic ores are again a bit less radiogenic. The isotopic differences between the Permo-Triassic and Quaternary data could be accounted for by a value for 238 U/ 204 Pb of 10.42 in common source material. Using this value of 238 U/ 204 Pb to calculate even further back to 400 m.y., the resulting ratios are found to fall very close to the "best value" for the lead isotope mixing line between the Devonian mantle and pelagic sediments. We interpret this intersection to be the "mean value" for the assimilated Devonian sediment lead--18.250 for 206 Pb/ 204 Pb and 15.582 for 207 Pb/ 204 Pb. As deduced for the lead isotope composition for the Devonian mantle at this location, the pelagic sediment, lead isotope composition also is toward the more radiogenic end of the values expected for pelagic sediments in the Devonian. Lack of sediments in the observed volcanic section of the West Shasta district suggests a submerged volcanic-arc setting (as interpreted by others for the Troodos and Samail ophiolites) rather than an island-arc situation (such as the Green Tuff area of Japan) or an incipient spreading ridge setting (that might have grown to be a subaerial Iceland). The elevated values of 207 Pb/ 204 Pb for some samples suggest a submerged volcanic are whereas the exceedingly low values of thorium--which is not easily mobilized during alteration events--for both basaltic andesites and plagiorhyolites is suggestive of depleted source material such as is found for most oceanic spreading centers. Elevated values of 207 Pb/ 204 Pb are exceedingly rare in midocean ridge basalts and low contents of thorium are known in island arcs, so a submerged volcanic arc is the preferred interpretation. Some similarity exists between the 206 Pb/ 204 Pb values of Devonian ores having elevated values of 207 Pb/ 204 Pb and those of the Permo-Triassic ores of the East Shasta district, as mentioned by Slawson in 1983. This similarity is now confirmed to be a coincidence. We find it due first of all to some incorporation of sediment lead in the magmas, followed later by some migration of radiogenic lead--probably locally derived--into the ores during subsequent events. Because there was some postdepositional lead migration into the ores, some migration of copper also into the ores cannot be excluded. Lead, especially radiogenic lead, however, is more mobile than copper. As the migrating lead is deduced to have been locally derived from the observed section rather than exotically derived, any copper added was probably locally derived also.

Economic Geology↗

USGS2013

Status and understanding of groundwater quality in the South Coast Range-Coastal study unit, 2008: California GAMA Priority Basin Project

Groundwater quality in the South Coast Range–Coastal (SCRC) study unit was investigated from May through November 2008 as part of the Priority Basin Project of the Groundwater Ambient Monitoring and Assessment (GAMA) Program. The study unit is located in the Southern Coast Range hydrologic province and includes parts of Santa Barbara and San Luis Obispo Counties. The GAMA Priority Basin Project is conducted by the U.S. Geological Survey (USGS) in collaboration with the California State Water Resources Control Board and the Lawrence Livermore National Laboratory. The GAMA Priority Basin Project was designed to provide a statistically unbiased, spatially distributed assessment of untreated groundwater quality within the primary aquifer system. The primary aquifer system is defined as that part of the aquifer corresponding to the perforation interval of wells listed in the California Department of Public Health (CDPH) database for the SCRC study unit. The assessments for the SCRC study unit were based on water-quality and ancillary data collected in 2008 by the USGS from 55 wells on a spatially distributed grid, and water-quality data from the CDPH database. Two types of assessments were made: (1) status, assessment of the current quality of the groundwater resource, and (2) understanding, identification of the natural and human factors affecting groundwater quality. Water-quality and ancillary data were collected from an additional 15 wells for the understanding assessment. The assessments characterize untreated groundwater quality, not the quality of treated drinking water delivered to consumers by water purveyors. The first component of this study, the status assessment of groundwater quality, used data from samples analyzed for anthropogenic constituents such as volatile organic compounds (VOCs) and pesticides, as well as naturally occurring inorganic constituents such as major ions and trace elements. Although the status assessment applies to untreated groundwater, Federal and California regulatory and non-regulatory water-quality benchmarks that apply to drinking water are used to provide context for the results. Relative-concentrations (sample concentration divided by benchmark concentration) were used for evaluating groundwater. A relative-concentration greater than (>) 1.0 indicates a concentration greater than the benchmark and is classified as high. Inorganic constituents are classified as moderate if relative-concentrations are >0.5 and less than or equal to (≤) 1.0, or low if relative-concentrations are ≤0.5. For organic constituents, the boundary between moderate and low relative-concentrations was set at 0.1. Aquifer-scale proportion was used in the status assessment as the primary metric for evaluating regional-scale groundwater quality. High aquifer-scale proportion is defined as the areal percentage of the primary aquifer system with a high relative-concentration for a particular constituent or class of constituents. Moderate and low aquifer-scale proportions were defined as the areal percentage of the primary aquifer system with moderate and low relative-concentrations, respectively. Two statistical approaches—grid-based and spatially weighted—were used to evaluate aquifer-scale proportions for individual constituents and classes of constituents. Grid-based and spatially weighted estimates were comparable for the study (within 90 percent confidence intervals). For inorganic constituents with human-health benchmarks, relative-concentrations were high for at least one constituent for 33 percent of the primary aquifer system in the SCRC study unit. Arsenic, molybdenum, and nitrate were the primary inorganic constituents with human-health benchmarks that were detected at high relative-concentrations. Inorganic constituents with aesthetic benchmarks, referred to as secondary maximum contaminant levels (SMCLs), had high relative-concentrations for 35 percent of the primary aquifer system. Iron, manganese, total dissolved solids (TDS), and sulfate were the inorganic constituents with SMCLs detected at high relative-concentrations. In contrast to inorganic constituents, organic constituents with human-health benchmarks were not detected at high relative-concentrations in the primary aquifer system in the SCRC study unit. Of the 205 organic constituents analyzed, 21 were detected—13 with human-health benchmarks. Perchloroethene (PCE) was the only VOC detected at moderate relative-concentrations. PCE, dichlorodifluoromethane (CFC-12), and chloroform were detected in more than 10 percent of the primary aquifer system. Of the two special-interest constituents, one was detected; perchlorate, which has a human-health benchmark, was detected at moderate relative-concentrations in 29 percent of the primary aquifer system and had a detection frequency of 60 percent in the SCRC study unit. The second component of this study, the understanding assessment, identified the natural and human factors that may have affected groundwater quality in the SCRC study unit by evaluating statistical correlations between water-quality constituents and potential explanatory factors. The potential explanatory factors evaluated were land use, septic tank density, well depth and depth to top-of-perforations, groundwater age, density and distance to the nearest formerly leaking underground fuel tank (LUFT), pH, and dissolved oxygen (DO) concentration. Results of the statistical evaluations were used to explain the occurrence and distribution of constituents in the study unit. DO was the primary explanatory factor influencing the concentrations of many inorganic constituents. Arsenic, iron, and manganese concentrations increased as DO concentrations decreased, consistent with patterns expected as a result of reductive dissolution of iron and (or) manganese oxides in aquifer sediments. Molybdenum concentrations increased in anoxic conditions and in oxic conditions with high pH, reflecting two mechanisms for the mobilization of molybdenum—reductive dissolution and pH-dependent desorption under oxic conditions from aquifer sediments. Nitrate concentrations decreased as DO concentrations decreased which would be consistent with degradation of nitrate under anoxic conditions (denitrification). It also is possible that nitrate concentrations decreased in relation to increasing depth and groundwater age and not as a result of denitrification. Groundwater age was another explanatory factor frequently correlated to several inorganic constituents. Iron and manganese concentrations were higher in pre-modern (water recharged before 1952) or mixed-age groundwater. This correlation is one indication that iron and manganese are from natural sources. Nitrate, TDS, and sulfate concentrations were higher in modern groundwater (water recharged since 1952) and may indicate that human activities increase concentrations of nitrate, TDS, and sulfate. Land use was a third explanatory factor frequently correlated with inorganic constituents. Nitrate, TDS, and sulfate concentrations were higher in agricultural land-use areas than in natural land-use areas, indicating that increased concentrations may be a result of agricultural practices. Organic constituents usually were detected at low relative-concentrations; therefore, statistical analyses of relations to explanatory factors usually were done for classes of constituents (for example, pesticides or solvents) as well as for selected constituents. The number of VOCs detected in a well was not correlated to any of the explanatory factors evaluated. The number of pesticide and solvent detections and PCE and CFC-12 concentrations were higher in modern groundwater than in pre-modern groundwater. PCE and CFC-12 also were positively correlated to the density of LUFTs. PCE was negatively correlated to natural land use. Chloroform concentrations were positively correlated to the density of septic systems. Perchlorate concentrations were greater in agricultural areas than in urban or natural areas. Correlation of perchlorate with DO may indicate that perchlorate biodegradation under anoxic conditions may occur. Anthropogenic sources have contributed perchlorate to groundwater in the SCRC study unit, although low levels of perchlorate may occur naturally.

California↗

USGS2011

Status and understanding of groundwater quality in the Santa Clara River Valley, 2007-California GAMA Priority Basin Project

Groundwater quality in the approximately 460-square-mile Santa Clara River Valley study unit was investigated from April through June 2007 as part of the Priority Basin Project of the Groundwater Ambient Monitoring and Assessment (GAMA) Program. The GAMA Priority Basin Project is conducted by the U.S. Geological Survey (USGS) in collaboration with the California State Water Resources Control Board and the Lawrence Livermore National Laboratory. The Santa Clara River Valley study unit contains eight groundwater basins located in Ventura and Los Angeles Counties and is within the Transverse and Selected Peninsular Ranges hydrogeologic province. The Santa Clara River Valley study unit was designed to provide a spatially unbiased assessment of the quality of untreated (raw) groundwater in the primary aquifer system. The assessment is based on water-quality and ancillary data collected in 2007 by the USGS from 42 wells on a spatially distributed grid, and on water-quality data from the California Department of Public Health (CDPH) database. The primary aquifer system was defined as that part of the aquifer system corresponding to the perforation intervals of wells listed in the CDPH database for the Santa Clara River Valley study unit. The quality of groundwater in the primary aquifer system may differ from that in shallow or deep water-bearing zones; for example, shallow groundwater may be more vulnerable to surficial contamination. Eleven additional wells were sampled by the USGS to improve understanding of factors affecting water quality.The status assessment of the quality of the groundwater used data from samples analyzed for anthropogenic constituents, such as volatile organic compounds (VOCs) and pesticides, as well as naturally occurring inorganic constituents, such as major ions and trace elements. The status assessment is intended to characterize the quality of untreated groundwater resources in the primary aquifers of the Santa Clara River Valley study unit, not the quality of treated drinking water delivered to consumers. Relative-concentrations (sample concentration divided by health- or aesthetic-based benchmark concentration) were used for evaluating groundwater quality for those constituents that have Federal and (or) California benchmarks. A relative-concentration greater than 1.0 indicates a concentration greater than a benchmark. For organic and special interest constituents, relative-concentrations were classified as high (greater than 1.0); moderate (greater than 0.1 and less than or equal to 1.0); and low (less than or equal to 0.1). For inorganic constituents, relative-concentrations were classified as high (greater than 1.0); moderate (greater than 0.5 and less than or equal to 1.0); and low (less than or equal to 0.5). Aquifer-scale proportion was used as the primary metric in the status assessment for evaluating regional-scale groundwater quality. High aquifer-scale proportion is defined as the areal percentage of the primary aquifer system with relative-concentrations greater than 1.0. Moderate and low aquifer-scale proportions are defined as the areal percentage of the primary aquifer system with moderate and low relative-concentrations, respectively. Two statistical approaches, grid-based and spatially weighted, were used to evaluate aquifer-scale proportions for individual constituents and classes of constituents. Grid-based and spatially weighted estimates were comparable in the Santa Clara River Valley study unit (within 90 percent confidence intervals). The status assessment showed that inorganic constituents were more prevalent and relative-concentrations were higher than for organic constituents. For inorganic constituents with human-health benchmarks, relative-concentrations (of one or more constituents) were high in 21 percent of the primary aquifer system areally, moderate in 30 percent, and low or not detected in 49 percent. Inorganic constituents with human-health benchmarks with high aquifer-scale proportions were nitrate (15 percent of the primary aquifer system), gross alpha radioactivity (14 percent), vanadium (3.4 percent), boron (3.2 percent), and arsenic (2.3 percent). For inorganic constituents with aesthetic benchmarks, relative-concentrations (of one or more constituents) were high in 54 percent of the primary aquifer system, moderate in 41 percent, and low or not detected in 4 percent. The inorganic constituents with aesthetic benchmarks with high aquifer-scale proportions were total dissolved solids (35 percent), sulfate (22 percent), manganese (38 percent), and iron (22 percent). In contrast, the results of the status assessment for organic constituents with human-health benchmarks showed that relative-concentrations were high in 0 percent (not detected above benchmarks) of the primary aquifer system, moderate in 2.4 percent, and low or not detected in 97 percent. Relative-concentrations of the special interest constituent, perchlorate, were moderate in 12 percent of the primary aquifer system and low or not detected in 88 percent. Relative-concentrations of two VOCs-carbon tetrachloride and trichloroethene (TCE)-were moderate in 2.4 percent of the primary aquifer system. One VOC-chloroform (water disinfection byproduct)-was detected in more than 10 percent of the primary aquifer system but at low relative-concentrations. Of the 88 VOCs and gasoline oxygenates analyzed, 71 were not detected. Pesticides were low or not detected in 100 percent of the primary aquifer system. Of the 118 pesticides and pesticide degradates analyzed, 13 were detected and 5 of those had human-health benchmarks. Two of these five pesticides-simazine and atrazine-were detected in more than 10 percent of the primary aquifer system. The second component of this study, the understanding assessment, was to identify the natural and human factors that affect groundwater quality on the basis of the evaluation of land use, physical characteristics of the wells, and geochemical conditions of the aquifer. Results from these analyses are used to explain the occurrence and distribution of selected constituents in the primary aquifer system of the Santa Clara River Valley study unit. The understanding assessment indicated that water quality varied spatially primarily in relation to depth, groundwater age, reduction-oxidation conditions, pH, and location in the regional groundwater flow system. High and moderate relative-concentrations of nitrate and low relative-concentrations of pesticides were correlated with shallow depths to top-of-perforation, and with high dissolved oxygen. Groundwater of modern and mixed ages had higher nitrate than pre-modern-age groundwater. Decreases in concentrations of total dissolved solids (TDS) and sulfate were correlated with increases in pH. This relationship probably indicates relations of these constituents with increasing depth across most of the Santa Clara River Valley study unit. Previous studies have indicated multiple sources of high concentrations of TDS and sulfate and multiple geochemical processes affecting these constituents in the Santa Clara River Valley study unit. Manganese and iron concentrations were highest in pre-modern-age groundwater at depth and in the downgradient area of the Santa Clara River Valley study unit (closest to the coastline), indicating the prevalence of reducing groundwater conditions in these aquifer zones.

Scientific Investigations Report↗

USGS2007

Physical criteria for distinguishing sandy tsunami and storm deposits using modern examples

Modern subaerial sand beds deposited by major tsunamis and hurricanes were compared at trench, transect, and sub-regional spatial scales to evaluate which attributes are most useful for distinguishing the two types of deposits. Physical criteria that may be diagnostic include: sediment composition, textures and grading, types and organization of stratification, thickness, geometry, and landscape conformity. Published reports of Pacific Ocean tsunami impacts and our field observations suggest that sandy tsunami deposits are generally < 25 cm thick, extend hundreds of meters inland from the beach, and fill microtopography but generally conform to the antecedent landscape. They commonly are a single homogeneous bed that is normally graded overall, or that consists of only a few thin layers. Mud intraclasts and mud laminae within the deposit are strong evidence of tsunami deposition. Twig orientation or other indicators of return flow during bed aggradation are also diagnostic of tsunami deposits. Sandy storm deposits tend to be > 30 cm thick, generally extend < 300 m from the beach, and will not advance beyond the antecedent macrotopography they are able to fill. They typically are composed of numerous subhorizontal planar laminae organized into multiple laminasets that are normally or inversely graded, they do not contain internal mud laminae and rarely contain mud intraclasts. Application of these distinguishing characteristics depends on their preservation potential and any deposit modifications that accompany burial. The distinctions between tsunami and storm deposits are related to differences in the hydrodynamics and sediment-sorting processes during transport. Tsunami deposition results from a few high-velocity, long-period waves that entrain sediment from the shoreface, beach, and landward erosion zone. Tsunamis can have flow depths greater than 10 m, transport sediment primarily in suspension, and distribute the load over a broad region where sediment falls out of suspension when flow decelerates. In contrast, storm inundation generally is gradual and prolonged, consisting of many waves that erode beaches and dunes with no significant overland return flow until after the main flooding. Storm flow depths are commonly < 3 m, sediment is transported primarily as bed load by traction, and the load is deposited within a zone relatively close to the beach. Published reports of Pacific Ocean tsunami impacts and our field observations suggest that sandy tsunami deposits are generally < 25 cm thick, extend hundreds of meters inland from the beach, and fill microtopography but generally conform to the antecedent landscape. They commonly are a single homogeneous bed that is normally graded overall, or that consists of only a few thin layers. Mud intraclasts and mud laminae within the deposit are strong evidence of tsunami deposition. Twig orientation or other indicators of return flow during bed aggradation are also diagnostic of tsunami deposits. Sandy storm deposits tend to be > 30 cm thick, generally extend < 300 m from the beach, and will not advance beyond the antecedent macrotopography they are able to fill. They typically are composed of numerous subhorizontal planar laminae organized into multiple laminasets that are normally or inversely graded, they do not contain internal mud laminae and rarely contain mud intraclasts. Application of these distinguishing characteristics depends on their preservation potential and any deposit modifications that accompany burial. The distinctions between tsunami and storm deposits are related to differences in the hydrodynamics and sediment-sorting processes during transport. Tsunami deposition results from a few high-velocity, long-period waves that entrain sediment from the shoreface, beach, and landward erosion zone. Tsunamis can have flow depths greater than 10 m, transport sediment primarily in suspension, and distribute the load over a broad region where sediment falls out of suspension when flow decelerates. In contrast, storm inundation generally is gradual and prolonged, consisting of many waves that erode beaches and dunes with no significant overland return flow until after the main flooding. Storm flow depths are commonly < 3 m, sediment is transported primarily as bed load by traction, and the load is deposited within a zone relatively close to the beach.

Sedimentary Geology↗

USGS2012

Status and understanding of groundwater quality in the two southern San Joaquin Valley study units, 2005-2006 - California GAMA Priority Basin Project

Groundwater quality in the southern San Joaquin Valley was investigated from October 2005 through March 2006 as part of the Priority Basin Project of the Groundwater Ambient Monitoring and Assessment (GAMA) Program. The GAMA Priority Basin Project is conducted by the U.S. Geological Survey (USGS) in collaboration with the California State Water Resources Control Board and the Lawrence Livermore National Laboratory. There are two study units located in the southern San Joaquin Valley: the Southeast San Joaquin Valley (SESJ) study unit and the Kern County Subbasin (KERN) study unit. The GAMA Priority Basin Project in the SESJ and KERN study units was designed to provide a statistically unbiased, spatially distributed assessment of untreated groundwater quality within the primary aquifers. The status assessment is based on water-quality and ancillary data collected in 2005 and 2006 by the USGS from 130 wells on a spatially distributed grid, and water-quality data from the California Department of Public Health (CDPH) database. Data was collected from an additional 19 wells for the understanding assessment. The aquifer systems (hereinafter referred to as primary aquifers) were defined as that part of the aquifer corresponding to the perforation interval of wells listed in the CDPH database for the SESJ and KERN study units. The status assessment of groundwater quality used data from samples analyzed for anthropogenic constituents such as volatile organic compounds (VOCs) and pesticides, as well as naturally occurring inorganic constituents such as major ions and trace elements. The status assessment is intended to characterize the quality of untreated groundwater resources within the primary aquifers in the SESJ and KERN study units, not the quality of drinking water delivered to consumers. Although the status assessment applies to untreated groundwater, Federal and California regulatory and non-regulatory water-quality benchmarks that apply to drinking water are used to provide context for the results. Relative-concentrations (sample concentration divided by benchmark concentration) were used for evaluating groundwater. A relative-concentration greater than 1.0 indicates a concentration greater than the benchmark and is classified as high. The relative-concentration threshold for classifying inorganic constituents as moderate or low was 0.5; for organic constituents the threshold between moderate and low was 0.1. Aquifer-scale proportion was used as the primary metric for assessing the quality of untreated groundwater for the study units. High aquifer-scale proportion is defined as the areal percentage of the primary aquifers with a high relative-concentration for a particular constituent or class of constituents. Moderate and low aquifer-scale proportions were defined as the areal percentage of the primary aquifers with moderate and low relative-concentrations, respectively. Two statistical approaches—grid-based and spatially weighted—were used to evaluate aquifer-scale proportions for individual constituents and classes of constituents. Grid-based and spatially weighted estimates were comparable for the two study units in the southern San Joaquin Valley (within 90 percent confidence intervals). The status assessment showed that inorganic constituents were more prevalent than organic constituents and that relative-concentrations were higher for inorganic constituents than for organic constituents. For inorganic constituents with human-health benchmarks, the relative-concentration of at least one constituent in the SESJ study unit was high in 30 percent of the primary aquifers. In the KERN study unit, the relative-concentration of at least one constituent was high in 23 percent of the primary aquifers. In the SESJ and KERN study units, the inorganic constituents with human-health benchmarks detected at high relative-concentrations in more than 2 percent of the primary aquifers were arsenic, boron, vanadium, nitrate, uranium, and gross alpha radioactivity. Additional constituents with human-health benchmarks—antimony, radium, and fluoride—were detected at high relative-concentrations in the KERN study unit. For inorganic constituents with aesthetic benchmarks (secondary maximum contaminant levels, SMCLs), the relative-concentration of at least one constituent in the SESJ study unit was high in 6.6 percent of the primary aquifers. In the KERN study unit, the relative-concentration of at least one constituent was high in 22 percent of the primary aquifers. Inorganic constituents with aesthetic benchmarks detected at high relative-concentrations in the primary aquifers in the SESJ and KERN study units were iron and manganese. Additional constituents with aesthetic benchmarks—total dissolved solids (TDS), sulfate, and chloride—were detected at high relative-concentrations in the KERN study unit. In contrast, the status assessment for organic constituents with human-health benchmarks showed that relative-concentrations were high in 4.8 percent and 2.1 percent of the primary aquifers in the SESJ and KERN study units, respectively. The special-interest constituent, perchlorate, was detected at high relative-concentrations in 1.2 percent of the primary aquifers in the SESJ study unit. Twenty-eight of the 78 VOCs (not including fumigants) analyzed were detected. Of these 28 VOCs, benzene had high relative-concentrations in the SESJ study unit, and relative-concentrations for the other 27 VOCs were moderate and low. Five of the 10 fumigants were detected; 1,2-dibromo-3-chloropropane (DBCP) was the only fumigant with high relative-concentrations in the SESJ and KERN study units. Of the 136 pesticides and pesticide degradates analyzed, 33 were detected. Human-health benchmarks were established for eighteen of the detected pesticides. Dieldrin was detected at moderate relative-concentrations in the SESJ and KERN study units. All other pesticides detected with human-health benchmarks were present at low relative-concentrations. The detection frequencies for two of these pesticides—simazine and atrazine—were greater than or equal to 10 percent in the SESJ and KERN study units. The understanding assessment of groundwater quality included an analysis of correlations of selected water-quality constituents or classes of constituents with potential explanatory factors. The understanding assessment indicated that the concentrations of many trace elements and major ions were correlated to well depth, groundwater age, and/or geochemical conditions. Many trace elements were positively correlated with depth. Arsenic, boron, vanadium, fluoride, manganese, and iron concentrations increased with well depth or depth to top-of-perforations. The concentrations for these trace elements also were higher in older (pre-modern) groundwater. In contrast, uranium concentrations decreased with increasing depth and groundwater age. Most trace elements were correlated to geochemical conditions. Arsenic, antimony, boron, fluoride, manganese, and iron concentrations generally were higher wherever the pH of the groundwater was greater than 7.6. Concentrations for these constituents generally were higher at low concentrations of dissolved oxygen (DO). Uranium was the exception; uranium concentrations generally were lower at high pH and at high concentrations of DO. Nitrate concentrations generally were lower in deeper wells. Nitrate concentrations also were higher in groundwater with higher DO. Total dissolved solids, sulfate, and chloride concentrations were higher in the KERN study unit than in the SESJ study unit. Total dissolved solids were negatively correlated with pH in the KERN study unit. Total dissolved solids and sulfate were higher in areas with more agricultural land use. Chloride concentrations increased with depth to top-of-perforations in the KERN study unit. Organic constituents and constituents of special interest, like many inorganic constituents, were correlated with well depth, groundwater age, and DO. Unlike most trace elements, however, solvent and pesticide detections, and total trihalomethanes (THM), DBCP, and perchlorate concentrations decreased with increasing well depth. Volatile organic compound, solvent, and pesticide detections, and THM concentrations also were lower in older (pre-modern) groundwater than in modern-age groundwater. Solvent detections and total THM, DBCP, and perchlorate concentrations increased with increasing DO concentrations.

California↗

USGS2023

Selenium hazards in the Salton Sea environment—Summary of current knowledge to inform future wetland management

Quaternary marine and continental shales in the western United States are sources of selenium that can be loaded into the aquatic environment through mining, agricultural, and energy production processes. The mobilization of selenium from shales through agricultural irrigation has been recognized since the 1930s; however, discovery of deformities in birds and other wildlife using agricultural habitats during the 1980s spurred studies to determine the extent and effects of the contamination. Through these early studies, researchers determined that biota in the Salton Sea drainage basin was at risk from legacy selenium contamination in the Colorado River watershed. The Salton Sea and its surrounding managed and unmanaged wetlands provide vital inland habitat and trophic support for diverse assemblages of resident and migratory wildlife, and understanding regional selenium hazards for these trust species is a priority for many Federal and State agencies. The modern Salton Sea is a shallow, landlocked saline lake in Riverside and Imperial Counties (not shown) of California that is sustained by irrigation return and perennial river inflow. Changes in water transfer agreements under the 2003 Quantification Settlement Agreement (QSA) have resulted in reduced irrigation flow, declining lake levels, and the evolution of unmanaged wetlands in areas where drains and rivers no longer reach the Salton Sea. These wetlands provide additional habitat for some species of concern, but their potential to increase selenium hazards for trust species is largely unknown. From the 1980s to 2020, efforts to document selenium contamination and effects throughout the region have resulted in a considerable amount of selenium data from the Salton Sea and its surrounding drainage basin; however, no long-term (greater than 20 years), consistent sampling program has been established, and all data have been collected by different entities using a variety of protocols and analytical techniques. This lack of coordination has been previously documented in regional management plans and has led to difficulty in reliably assessing selenium hazards in the Salton Sea environment. This report provides a summary of the available disparate selenium information collected from water, sediment, and biota in the Salton Sea region since the 1980s and to identify data gaps that need to be filled to understand the potential effects of selenium on species of concern, including federally endangered desert pupfish ( Cyprinodon macularius ) and Yuma Ridgway’s Rail ( Rallus obsoletus yumanensis; formerly Yuma Clapper Rail, Rallus longirostris yumanensis ). Available data from the Salton Sea drainage basin show that water from the Colorado River has the lowest selenium concentration of all surface water sources. All other surface water flowing into the Salton Sea has elevated selenium concentrations due to evaporation and evapotranspiration that occurs in agricultural fields and associated water delivery infrastructure or leaching of selenium from irrigated farmland soils. The Salton Sea has lower selenium concentrations because of various biogeochemical processes that recycle selenium into the sediment or volatilize it to the atmosphere; however, these mechanisms are not well defined, and it is not clear if selenium cycling will change in response to possible changes in the oxidation state of the Salton Sea bottom waters as water levels decline. Agricultural drains have the highest average selenium concentrations, but few drains have been sampled since changes in irrigation practices have occurred (due to the 2003 QSA). Groundwater selenium concentrations are variable; some wells south of the Salton Sea have selenium concentrations as high as 300 micrograms per liter (µg/L), whereas selenium concentrations are below detection in other wells. Groundwater and surface-water geothermal discharge zones around the margins of the Salton Sea and in unmanaged wetlands have not been studied in detail, and published selenium measurements are not available for these surface features. Selenium concentrations in the sediment of the Salton Sea drainage basin are highest in wetland particulate organic matter and the Salton Sea lakebed, indicating that removal of selenium from the water to the sediment has been a primary mechanism for keeping selenium concentrations low in the water column. Sediment selenium concentrations in wetlands are lower than in the Salton Sea but higher than inflowing drains and rivers, indicating the lentic wetland sites also may be important sinks for selenium because of biogeochemical processes. Sediment selenium data have not been collected in agricultural drains since changes in irrigation practices occurred (due to the 2003 QSA), and it is unknown if selenium sequestration from the water column has changed in these systems. We divided biological data into broad taxonomic categories, including primary producers, invertebrates, herpetofauna, mammals, fishes, and birds to facilitate evaluation of selenium concentrations and spatiotemporal trends observed in the Salton Sea. Overall, selenium concentrations were substantially greater in algae samples compared to all vascular plant samples combined. Median selenium concentrations in several invertebrate taxa (Chironomidae, Formicidae, Corixidae, Corbiculidae and Nereididae, and Decapoda) exceeded the maximum suggested dietary threshold of 3.0–4.0 micrograms per gram (µg/g) dry weight (dw) for predators consuming invertebrates in aquatic food webs. The greatest number of samples were collected from fish, and selenium distributions among species and locations showed that the range for most samples was lower than the U.S. Environmental Protection Agency selenium criterion for aquatic life (8.5 µg/g dw whole body, 11.3 µg/g dw fillets). The median selenium concentrations for whole body fish were below the selenium criterion in most locations, except for bairdiella ( Bairdiella icistia ) from the Salton Sea and irrigation drains, a few individual tilapia spp. (family Cichlidae, including genera Tilapia, Oreochromis , and their hybrids) from the river and river outlets, and several western mosquitofish ( Gambusia affinis ) and sailfin molly ( Poecilia latipinna ) from irrigation drain outlets. For avian samples combined among years and locations, median selenium concentrations in livers from all families except waders and Ibis (family Threskiornithidae) were higher than levels expected to cause selenium toxicosis (10–20 µg/g dw), and all median egg concentrations were above or near 6.0 μg/g dw, which is a conservative threshold value for reproductive impairment. Most knowledge gaps we identified for water, sediment, and biota were interrelated, and the use of integrated approaches to address knowledge gaps can provide greater insight into the drivers behind selenium hazards. Integrated water, sediment, and biota studies could help identify cost-effective management solutions that serve multiple purposes. A comprehensive analysis of the hydrology, biogeochemistry, and food-web processes in wetlands and other habitats can inform predictive models to identify drivers of selenium bioavailability, uptake from the environment and subsequent trophic transfer, ultimately forming the basis for experimental habitat management manipulations to minimize selenium hazards to wildlife. Furthermore, a comprehensive, long-term sampling and analytical laboratory plan would enable comparison of data among different entities that are sampling at the Salton Sea. Such efforts are well suited to help fill knowledge gaps that preclude understanding of selenium hazards and future management options for biota using Salton Sea habitats, including newly formed wetlands throughout the region. All data compiled for this report are available in two U.S. Geological Survey data releases: Groover and others (2022) for water and sediment samples and De La Cruz and others (2022) for biological samples. The data releases include all publicly available data for selenium concentrations in water, sediment, and biological samples collected in and around the Salton Sea, including the Coachella and Imperial Valleys. The data releases also include previously unpublished data.

California↗

USGS2015

Status and understanding of groundwater quality in the Northern Coast Ranges study unit, 2009: California GAMA Priority Basin Project

Groundwater quality in the 633-square-mile (1,639-square-kilometer) Northern Coast Ranges (NOCO) study unit was investigated as part of the Priority Basin Project (PBP) of the Groundwater Ambient Monitoring and Assessment (GAMA) Program and the U.S. Geological Survey (USGS) National Water-Quality Assessment Program. The study unit is composed of two study areas (Interior Basins and Coastal Basins) and is located in northern California in Napa, Sonoma, Lake, Colusa, Mendocino, Glenn, Humboldt, and Del Norte Counties. The GAMA-PBP is being conducted by the California State Water Resources Control Board in collaboration with the USGS and the Lawrence Livermore National Laboratory. The GAMA NOCO study was designed to provide a spatially unbiased assessment of the quality of untreated (ambient) groundwater in the primary aquifer system within the study unit. The assessment is based on water-quality and ancillary data collected in 2009 by the USGS from 58 sites and on water-quality data from the California Department of Public Health (CDPH) database. The primary aquifer system is defined by the perforation intervals of sites listed in the CDPH water-quality database for the NOCO study unit. Groundwater quality in the primary aquifer system may differ from the quality in the shallow or deep water-bearing zones. The first component of this study, the status assessment of the current quality of the groundwater resource, was performed by using data from samples analyzed for inorganic constituents (such as trace elements and major and minor ions), organic constituents (volatile organic compounds and pesticides and pesticide degradates), the special-interest constituent perchlorate, and microbial indicators. This status assessment is intended to characterize the quality of groundwater resources in the primary aquifer system of the NOCO study unit, not the quality of treated drinking water delivered to consumers by water purveyors. Relative-concentrations (sample concentration divided by the health- or aesthetic-based benchmark concentration) were used for evaluating groundwater quality for those constituents that have Federal or California regulatory or nonregulatory benchmarks for drinking-water quality. A relative-concentration greater than (>) 1.0 indicates a concentration greater than a benchmark, and a relative-concentration less than or equal to (≤) 1.0 indicates a concentration less than or equal to a benchmark. Relative-concentrations of organic constituents and perchlorate were classified as “high” (relative-concentration >1.0), “moderate” (0.1 < relative-concentration ≤1.0), or “low” (relative-concentration ≤0.1). Relative-concentrations of inorganic constituents were classified as “high” (relative-concentration >1.0), “moderate” (0.5 < relative-concentration ≤1.0), or “low” (relative-concentration ≤0.5). Aquifer-scale proportion was used as the primary metric in the status assessment for evaluating regional-scale groundwater quality. High aquifer-scale proportion was defined as the percentage of the area of the primary aquifer system with a relative-concentration >1.0 for a particular constituent or class of constituents; the percentage is based on an aerial rather than a volumetric basis. Moderate and low aquifer-scale proportions were defined as the percentage of the primary aquifer system with moderate and low relative-concentrations, respectively. Two statistical approaches—grid-based and spatially weighted—were used to evaluate aquifer-scale proportions for individual constituents and classes of constituents. Grid-based and spatially weighted estimates were comparable in the NOCO study unit (within 90 percent confidence intervals). Inorganic constituents (one or more) with health-based benchmarks were detected at high relative-concentrations in 10.3 percent and at moderate relative-concentrations in 13.8 percent of the primary aquifer system. The high aquifer-scale proportion of inorganic constituents primarily reflected high aquifer-scale proportions of boron (in 8.6 percent of the primary aquifer system), arsenic (in 3.4 percent), and barium (in 1.7 percent). Inorganic constituents with aesthetic-based benchmarks were detected at high relative-concentrations in 39.7 percent and at moderate relative-concentrations in 10.3 percent of the primary aquifer system. The constituents present at high relative-concentrations were iron (25.9 percent) and manganese (39.7 percent). Relative-concentrations of organic constituents with health-based benchmarks (one or more) were high in 0.2 percent, moderate in 1.7 percent, and low in 39.7 percent of the primary aquifer system. Organic constituents were not detected in 58.4 percent of the primary aquifer system. Of the 168 organic constituents analyzed, 11 constituents were detected. Two organic constituents had detection frequencies >10 percent: the trihalomethane chloroform and the herbicide simazine. For the 10 detected organic constituents that had health-based benchmarks, nearly all detections had low relative-concentrations. The special-interest constituent perchlorate was detected at moderate relative-concentrations in 1.7 percent and at low relative-concentrations in 22.4 percent of the primary aquifer system. Perchlorate was not detected in 75.9 percent of the primary aquifer system. The second component of this study, the understanding assessment , evaluated relations between constituent concentrations and values of selected potential explanatory factors to identify the factors potentially affecting the concentrations and occurrences of constituents found at high relative-concentrations or, for organic constituents, with detection frequencies >10 percent. The potential explanatory factors evaluated were land use (including density of septic tanks and leaking or formerly leaking underground fuel tanks), well construction (well depth and depth to the top of the perforated interval in the well), hydrologic conditions (aridity index, field water temperature, and distance to nearest hot spring and geothermal well), pH, dissolved oxygen concentration, study area, groundwater age distribution, and geochemical conditions. High and moderate relative-concentrations of boron primarily occurred in the Interior Basins study area and may be attributed to groundwater interacting with hydrothermal systems. High and moderate relative-concentrations of boron were associated with elevated groundwater temperatures, groundwater chemistry characteristics similar to those of geothermal waters, and distance to known geothermal areas. Boron concentrations generally were higher where low dissolved oxygen concentrations or anoxic conditions exist. High and moderate relative-concentrations of arsenic predominantly occur in the Interior Basins study area under reducing conditions. Arsenic concentrations also may be influenced by hydrothermal systems (when present). Chloroform, simazine, and perchlorate were observed in the Interior Basins and Coastal Basins study areas, predominantly at shallow sites with top-of-perforation depths ≤70 feet below land surface, with modern water (post-1950s), and with oxic groundwater conditions.

California↗

USGS2017

Geophysics- and geochemistry-based assessment of the geochemical characteristics and groundwater-flow system of the U.S. part of the Mesilla Basin/Conejos-Médanos aquifer system in Doña Ana County, New Mexico, and El Paso County, Texas, 2010–12

One of the largest rechargeable groundwater systems by total available volume in the Rio Grande/Río Bravo Basin (hereinafter referred to as the “Rio Grande”) region of the United States and Mexico, the Mesilla Basin/Conejos-Médanos aquifer system, supplies water for irrigation as well as for cities of El Paso, Texas; Las Cruces, New Mexico; and Ciudad Juárez, Chihuahua, Mexico. The U.S. Geological Survey in cooperation with the Bureau of Reclamation assessed the groundwater resources in the Mesilla Basin and surrounding areas in Doña Ana County, N. Mex., and El Paso County, Tex., by using a combination of geophysical and geochemical methods. The study area consists of approximately 1,400 square miles in Doña Ana County, N. Mex., and 100 square miles in El Paso County, Tex. The Mesilla Basin composes most of the study area and can be divided into three parts: the Mesilla Valley, the West Mesa, and the East Bench. The Mesilla Valley is the part of the Mesilla Basin that was incised by the Rio Grande between Selden Canyon to the north and by a narrow valley (about 4 miles wide) to the southeast near El Paso, Tex., named the Paso del Norte, which is sometimes referred to in the literature as the “El Paso Narrows.” Previously published geophysical data for the study area were compiled and these data were augmented by collecting additional geophysical and geochemical data. Geophysical resistivity measurements from previously published helicopter frequency domain electromagnetic data, previously published direct-current resistivity soundings, and newly collected (2012) time-domain electromagnetic soundings were used in the study to detect spatial changes in the electrical properties of the subsurface, which reflect changes that occur within the hydrogeology. The geochemistry of the groundwater system was evaluated by analyzing groundwater samples collected in November 2010 for physicochemical properties, major ions, trace elements, nutrients, pesticides (reported but not used in the assessment), and environmental tracers. The data obtained from these samples (with the exception of the pesticide data) were used to gain insights into processes controlling the groundwater movement through the groundwater system in the study area. Results from the geophysical and geochemical assessments facilitated the interpretation of the geochemical characteristics of the groundwater sources and geochemical groups within the groundwater system. The groundwater-flow system in the study area consists primarily of the Mesilla Basin aquifer system, which can be divided into four hydrogeologic units by using an informal classification scheme based on basin-fill stratigraphy and sedimentology with an emphasis on aquifer characteristics. The four hydrogeologic units are (1) the Rio Grande alluvium, which is the shallow aquifer of the Mesilla Basin within the confines of the Mesilla Valley, and the three hydrogeologic units that compose the Santa Fe Group: (2) the lower part of the Santa Fe Group, which is the least productive zone, (3) the middle part of the Santa Fe Group, which is the primary water-bearing hydrogeologic unit in the basin and is generally saturated, and (4) the upper part of the Santa Fe Group, which is the most productive water-bearing unit within the Santa Fe Group but is only partially saturated in the north and largely unsaturated in the south and western parts of the Mesilla Basin. The helicopter frequency domain electromagnetic survey results indicated that approximately half of the resistivity values were less than 10 ohm-meters at depths of 50 and 100 feet with a transition where the resistivity values changed from relatively high values (greater than 20 ohm-meters) to relatively low resistivity values (less than 10 ohm-meters) near Vado, New Mexico. Slightly more than 25 percent of the gridded resistivity values from the three-dimensional grid of the combined inverse modeling results of the direct-current resistivity and time-domain electromagnetic soundings were equal to or less than 10 ohm-meters with large regions of low resistivity becoming apparent in the southernmost part of the study area near the Paso Del Norte where these low resistivity features are spatially the widest at or below the top of the bedrock. These low resistivity values might represent clayey deposits, sediments composed largely of sand and gravel saturated with saline water, or both. Historical dissolved-solids-concentration data within the surface geophysical subset area of the study area were compiled and compared to the inverse modeling results of the combined direct-current resistivity and time-domain soundings; this comparison was done to strengthen the interpretation made from the combined inverse modeling results that the low resistivity features were representative of sand and gravel deposits saturated with saline water and not clayey deposits. Water-level altitudes within the Rio Grande alluvium generally decreased from north to south, with a west to east decrease in water-level altitudes near Las Cruces, New Mexico, as a result of groundwater pumping. Groundwater flow within the Santa Fe Group is more complex than the groundwater flow within the Rio Grande alluvium because of the larger lateral and vertical extent of the Santa Fe Group compared to the Rio Grande alluvium. Groundwater from the Organ Mountains flows directly south towards the Paso del Norte. Groundwater from the Robledo Mountains, the Rough and Ready Hills, and the Sleeping Lady Hills generally flows to the southeast. Groundwater flowing near the north end of the midbasin uplift generally continues east towards the Rio Grande and then flows south on the east side of the midbasin uplift. Groundwater flowing near the west side of the midbasin uplift generally continues south parallel to the faults that make up the midbasin uplift and then flows east towards the Paso del Norte when it reaches the south end of the midbasin uplift. Groundwater from the Aden Hills and the East and West Potrillo Mountains flows to the south end of the midbasin uplift and then continues east towards the Paso del Norte. Throughout most of the Mesilla Valley, the vertical hydraulic gradient was downward because the water-level altitude in the Rio Grande alluvium was higher than it was in the Santa Fe Group, but in some areas (typically in the middle and southern parts of the Mesilla Valley), the vertical hydraulic gradient was substantially reduced or even reversed to an upward hydraulic gradient. The geochemistry data indicate that there was a complex system of multiple geochemical endmembers and mixing between these endmembers with recharge to the Rio Grande alluvium and Santa Fe Group composed mostly of seepage from the Rio Grande, inflows from deeper or neighboring water systems, and mountain-front recharge. Five distinct geochemical groups were identified in the Mesilla Basin study area: (1) ancestral Rio Grande (pre-Pleistocene) geochemical group, (2) modern Rio Grande (Pleistocene to present) geochemical group, (3) mountain-front geochemical group, (4) deep groundwater upwelling geochemical group, and (5) unknown freshwater geochemical group. The ancestral Rio Grande groundwater was water that recharged into the system as seepage losses from the ancestral Rio Grande; this groundwater generally flows from north to south-southeast towards the Paso del Norte. Groundwater on the west side of the midbasin uplift generally flows south until it reaches the southern part of the study area; from the southern part of the study area, the groundwater flows east towards the Paso del Norte. Groundwater on the east side of the midbasin uplift flows south-southeast towards the Paso del Norte where it mixes with groundwater from the modern Rio Grande, uplifted areas in the west, and the deep saline source. The water type of the modern Rio Grande geochemical group ranged from calcium-sulfate water type in the northern part of the study area to sodium-chloride-sulfate water type in the southern part of the study area; from north to south there was a substantial increase in specific conductance, strontium-87/strontium-86 ratio, potassium, and the trace metals of iron and lithium, changing the water chemistry such that it became similar to the water chemistry of the deep groundwater upwelling geochemical group. From age-dating results, water in the modern Rio Grande geochemical group was recharged to the Rio Grande alluvium within the past 10 years. The mountain-front geochemical group was generally old water (apparent age was greater than 10,000 carbon-14 years before present) that was somewhat mineralized and has relatively high concentrations of fluoride and silica, which might indicate longer exposure to volcanic and siliciclastic rocks or aluminosilicate minerals. There were five different locations of recharge determined from the groundwater geochemistry within the mountain-front geochemical group, all having a slightly different geochemical signature: (1) the Rough and Ready Hills, Robledo Mountains, and the Sleeping Lady Hills, (2) the Doña Ana Mountains, (3) the Aden Hills and West Potrillo Mountains, (4) the East Potrillo Mountains, and (5) the Sierra Juárez in Mexico. The groundwater from the Rough and Ready Hills, Robledo Mountains, the Sleeping Lady Hills, and the Doña Ana Mountains generally flows toward the Rio Grande and eventually mixes together and with the modern Rio Grande groundwater. The groundwater originating from the Aden Hills and East and West Potrillo Mountains generally flows east to southeast at a slow rate and eventually mixes and continues east, where it mixes with groundwater from the ancestral Rio Grande geochemical group and with the groundwater from the Sierra Juárez. The groundwater from the Sierra Juárez flows north and then east towards the Paso del Norte where it mixes with groundwater from the uplifted areas in the west, ancestral and modern Rio Grande groundwater, and the upwelling groundwater from a deep saline source. The deep groundwater upwelling geochemical group had the highest concentrations of bicarbonate, potassium, silica, aluminum, iron, and lithium within the study area, indicating that it had been in contact with carbonate and siliciclastic rocks for a much longer period of time and at higher temperatures compared to the other geochemical groups, and was most likely ancient marine groundwater originating from the Paleozoic and Cretaceous carbonate rocks which was upwelling into the Mesilla Basin aquifer system in the southeastern part of the study area through the extensive fault systems. Direct-current resistivity and time-domain electromagnetic soundings support the interpretation of ancient marine groundwater upwelling into the Mesilla Basin aquifer system, as do the analytical results from wells, and the helicopter frequency domain electromagnetic data collected along the Rio Grande. The hydrogen-2/hydrogen-1 ratio and oxygen-18/oxygen-16 ratio isotopic results for samples in the unknown freshwater geochemical group did not plot on the Rio Grande evaporation line, indicating this group did not have a Rio Grande signature (that is, there was no isotopic evidence of a component of Rio Grande water) and it also had the lowest mineralized content of any geochemical group in the study area.

New Mexico, Texas↗