Geology Reports⌕ Search

SEARCH · Geology Reports

Results for “Surveys in Geophysics”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 955 records · Page 53Linked to original sources
USGS2011

Geophysical characterization of the Lollie Levee near Conway, Arkansas, using capacitively coupled resistivity, coring, and direct push logging

A geophysical characterization of Lollie Levee near Conway, Arkansas, was conducted in February 2011. A capacitively coupled resistivity survey (using Geometric's OhmMapper) was completed along the top and toe of the 6.7-mile levee. Two-dimensional inversions were conducted on the geophysical data. As a quality-control measure, cores and direct push logs were taken at approximately 1-mile intervals along the levee. The capacitively coupled resistivity survey, the coring, and the direct push logs were used to characterize the geologic materials. Comparison of the cores and the direct push log data, along with published resistivity values, indicates that resistivity values of 200 Ohm-meters or greater represent relatively clean sand, with decreasing resistivity values occurring with increasing silt and clay content. The cores indicated that the levee is composed of a heterogeneous mixture of sand, silt, and clay. The capacitively coupled resistivity sections confirm that the levee is composed of a heterogeneous mixture of high and low resistivity materials and show that the composition of the levee varies spatially. The geologic materials underlying the levee vary spatially as a result of the geologic processes that deposited them. In general, the naturally deposited geologic materials underlying the levee contain a greater amount of low resistivity materials in the southern extent of the levee.

Faulkner, Arkansas↗
USGS2011

Identification of mineral resources in Afghanistan—Detecting and mapping resource anomalies in prioritized areas using geophysical and remote sensing (ASTER and HyMap) data

As part of the U.S. Geological Survey (USGS) and Department of Defense Task Force for Business and Stability Operations (TFBSO) natural resources revitalization activities in Afghanistan (Peters and others, 2011), three new datasets have been collected, compiled, and analyzed. These data have been used to more fully evaluate the areas of interest (AOIs; fig. 1 ) where, on the basis of previous U.S.S.R. and Afghanistan studies, the opportunity for early economic development of a number of different mineral, commodity, and deposit types had been identified (Peters and others, 2007; Peters and others, 2011). The new data compilations include (1) regional magnetic and gravity data for use in the characterization of subsurface composition and structure (Sweeney and others, 2006a,b; Ashan and others, 2007; Sweeney and others, 2007; Ashan and others, 2008; Shenwary and others, 2011), (2) Advanced Spaceborne Thermal Emission and Reflection Radiometer (ASTER) data to identify and evaluate surficial alteration patterns related to industrial minerals and other selected targets, and (3) HyMap imaging spectrometer data for characterization and mapping of surficial mineralogy (Cocks and others, 1998; Kokaly and others, 2008; Peters and others, 2011). These datasets have served as fundamental building blocks for the resource evaluation by Peters and others (2011). During the independent analysis of the geophysical, ASTER, and imaging spectrometer (HyMap) data by USGS scientists, previously unrecognized targets of potential mineralization were identified using evaluation criteria most suitable to the individual dataset. These anomalous zones offer targets of opportunity that warrant additional field verification. This report describes the standards used to define the anomalies, summarizes the results of the evaluations for each type of data, and discusses the importance and implications of regions of anomaly overlap between two or three of the datasets.

Open-File Report↗
USGS2011

Geophysical, geochemical, mineralogical, and enivronmental data for rock samples collected in a mineralized volcanic environment, upper Animas River watershed, Colorado

This report provides analyses of 90 rock samples collected in the upper Animas River watershed near Silverton, Colo., from 2001 to 2007. The samples are analyzed for geophysical, geochemical, mineralogical, and environmental rock properties of acid neutralizing capacity and net acid production. The database is derived from both published (n=68) and unpublished (n=32) data. New for all samples are geophysical measurements of electrical resistivity, density, and porosity. Rock samples were acquired from 12 geologic units that include key Tertiary volcanic and plutonic lithologies, all with varying degrees of alteration. The purpose of this study is to * provide a comprehensive and complete record of U.S. Geological Survey rock samples collected and similarly analyzed in the upper Animas River watershed for various physical, chemical, and geoenvironmental properties; * provide measurements of geophysical rock properties of lithologic units to establish ground truth with respect to watershed-scale airborne magnetic and electrical survey data; * use the data to interpret the airborne geophysical anomalies to characterize rocks in terms of acid neutralizing capacity or net acid production; and * provide measurements to study the geochemical, mineralogical, and geophysical characteristics of rocks having weak to extreme degrees of alteration and to develop an understanding of how these characteristics change with alteration type. Data are provided in two digital formats: an Arc/Info geodatabase and a Microsoft Excel spreadsheet.

Data Series↗
USGS2025

Airborne geophysical efforts for critical mineral systems mapping in the southern Midcontinent, USA

The increasing global demand for critical minerals to support energy and technological advancement has accelerated exploration and research efforts for these essential resources. Since 2019, the United States Geological Survey (USGS) Earth Mapping Resources Initiative (EMRI) has worked to modernize geologic mapping of the Nation to better understand its critical mineral resources. To further this initiative, the USGS has flown a series of high-resolution airborne magnetic and radiometric surveys over large areas of the southern Midcontinent. The surveys cover known critical mineral deposits and areas with the potential to host additional critical minerals based on the presence of one or more overlapping mineral systems. One aspect of EMRI emphasizes close collaboration between the USGS and the Association of American State Geologists, as well as other government and industry partners to leverage geophysical, geological, and geochemical expertise on both regional and local scales. The EMRI high-resolution airborne survey data provide new insights into the geophysical framework of the southern Midcontinent and its critical mineral endowment. Additionally, discoveries made from the data have directed new studies for critical mineral exploration.

southern Midcontinent↗
USGS2022

Mapping the altitude of the top of the Dockum Group and paleochannel analysis using surface geophysical methods on and near Cannon Air Force Base in Curry County, New Mexico, 2020

The hydrogeology on and near Cannon Air Force Base (AFB) in eastern New Mexico was assessed to gain a better understanding of preferential groundwater flow paths through paleochannels. In and near the study area, paleochannels incised the top surface of the Dockum Group (Chinle Formation) and were subsequently filled in with electrically resistive coarse-grained sediments of the overlying Ogallala Formation, resulting in a preferential groundwater flow path in the form of a paleochannel network. A better understanding of the spatial characteristics of this preferential groundwater flow path is needed to support ongoing efforts to remediate groundwater contamination at Cannon AFB. Therefore, the U.S. Geological Survey, in cooperation with the U.S. Air Force Civil Engineer Center, used surface geophysical resistivity methods and data compiled from previous studies to better understand the spatial distribution and characteristics of the paleochannel network incised into the top of the Dockum Group. Previous studies have shown these paleochannels incised into the top of the Dockum Group with increasing resolution, but limited borehole data on and near Cannon AFB continued to make accurately mapping the top of Dockum Group challenging. For this study, surface geophysical resistivity measurements in the form of time-domain electromagnetic soundings made by the U.S. Geological Survey were used in conjunction with data previously published by Architecture, Engineering, Construction, Operations, and Management and borehole data compiled from the New Mexico Water Rights Reporting System database to prepare an updated map of the top of the Dockum Group that includes the location and characteristics of paleochannels incised into the top of the Dockum Group (Chinle Formation). A total of 149 borehole picks (determinations of the tops and bases of geologic units and their hydrogeologic-unit equivalents) were obtained from previous studies, along with 72 additional borehole picks from the New Mexico Water Rights Reporting System database and 43 picks from newly collected time-domain electromagnetic soundings. The data were gridded and contoured using Oasis Montaj v. 9.8.1. The updated map of the top of Dockum Group has many areas of uncertainty greater than 20 feet, because there are not enough data for the gridding process to reliably determine a value. However, this interpretation of the altitude of the top of the Dockum Group represents a substantial improvement in data resolution compared to previous studies. Two methodologies were used to evaluate paleochannels incised in the top of the Dockum Group across the study area: (1) trend-removal grid analysis and (2) analysis with Esri’s ArcMap Hydrology toolset. These two paleochannel analysis techniques show groundwater flow direction as well as areas having the deepest saturated thickness. Hydrologically, these techniques show where aquifer storage is highest (in the deepest parts of the paleochannel network), as well as the spatial distribution of preferential groundwater flow paths (the paleochannels). The analyses indicate a large paleochannel trending to the southeast, with smaller channels feeding in from the west. Areas where groundwater management could be more beneficial are indicated by locations where these flow lines intersect the deeper parts of the paleochannel.

New Mexico↗
USGS2014

Preliminary report on the North Atlantic deep‐sea cores taken by the Geophysical Laboratory, Carnegie Institution

A series, of 11 cores from the North Atlantic sea‐bottom between the Newfoundland Banks and the banks off the Irish Coast have been studied by a group of geologists of the United States Geological Survey. These cores were taken by Dr. C. S. Piggot of the Carnegie Institution's Geophysical Laboratory from the cable ship Lord Kelvin with the explosive type of sounding‐apparatus, which he designed (C. S. Piggot, Apparatus to secure core‐samples from the oceanbottom, Bull. Geol. Soc. Amer., v. 47, pp. 675–684, 1936). This preliminary report is based largely on the results obtained by M. N. Bramlette, who studied the lithology, and Jos. A. Cushman, who studied the forarainifera. The geographic position, the depth of water at each station, and the length of core obtained are given in Table 1. ©1937. American Geophysical Union. All Rights Reserved.

Newfoundland and Labrador↗
USGS2008

Interpretation of Borehole Geophysical Logs at Area C, Former Naval Air Warfare Center, Warminster Township, Bucks County, Pennsylvania, 2007

This study was done by the U.S. Geological Survey in cooperation with the U.S. Navy at Area C of the former Naval Air Warfare Center in Warminster Township, Bucks County, Pa., in support of hydrogeological investigations conducted by the Navy to address ground-water contamination in the Stockton Formation. Borehole geophysical logs were collected, heatpulse-flowmeter measurements were made, and borehole television surveys were run in seven boreholes ranging from 31 to 75 feet deep. Caliper logs and borehole television surveys were used to identify fractures and the location of possible water-bearing zones. Heatpulse-flowmeter measurements were used to identify fractures that were water-bearing zones. Natural-gamma and single-point-resistance logs were used to correlate lithology across the area. Elevated concentrations of tetrachloroethylene (PCE) were measured in water samples from wells with water-bearing zones in the interval of the aquifer where monitor well HN-23A is screened. Water samples from wells with water-bearing zones above or below this interval had substantially lower concentrations of PCE. Wells screened in this interval yielded less than 0.5 gallon per minute, indicating that the interval has low permeability; this may account for the small areal extent and slow migration of PCE.

Open-File Report↗
USGS2018

New insights into surface-water/groundwater exchanges in the Guadalupe River, Texas, from floating geophysical methods

In south-central Texas, the amount of streamflow in the Guadalupe River is a primary concern for local and downstream communities because of municipal, agricultural, wildlife, and recreational uses. Understanding the flow paths and rates of exchange between the surface water in the river and the groundwater in the underlying Carrizo-Wilcox aquifer is vital for understanding the water budget and streamflow variations. In areas where the Guadalupe River crosses the Carrizo-Wilcox aquifer outcrop, the surface-water and groundwater exchanges are not well characterized. Traditional methods to measure these interactions, such as measuring differences in surface-water flows at different locations to infer gains and losses between the locations, are not feasible along this stretch of the Guadalupe River because of upstream dams that cause large daily fluctuations in streamflow. Consequently, the U.S. Geological Survey, in cooperation with the Guadalupe-Blanco River Authority, applied geophysical methods in an exploratory study to identify reaches of the river where streamflow gains and losses (surface-water/groundwater exchanges) might be occurring.

Texas↗
USGS2017

Geophysical logging and thermal imaging near the Hemphill Road TCE National Priorities List Superfund site near Gastonia, North Carolina

Borehole geophysical logs and thermal imaging data were collected by the U.S. Geological Survey near the Hemphill Road TCE (trichloroethylene) National Priorities List Superfund site near Gastonia, North Carolina, during August 2014 through February 2015. In an effort to assist the U.S. Environmental Protection Agency in the development of a conceptual groundwater model for the assessment of current contaminant distribution and future migration of contaminants, surface geological mapping and borehole geophysical log and thermal imaging data collection, which included the delineation of more than 600 subsurface features (primarily fracture orientations), was completed in five open borehole wells and two private supply bedrock wells. In addition, areas of possible groundwater discharge within a nearby creek downgradient of the study site were determined based on temperature differences between the stream and bank seepage using thermal imagery.

North Carolina↗
USGS2014

Geophysical expression of a buried niobium and rare earth element deposit: the Elk Creek carbonatite, Nebraska, USA

The lower Paleozoic Elk Creek carbonatite is a 6–8-km-diameter intrusive complex buried under 200 m of sedimentary rocks in southeastern Nebraska. It hosts the largest known niobium deposit in the U.S. and a rare earth element (REE) deposit. The carbonatite is composed of several lithologies, the relations of which are poorly understood. Niobium mineralization is most enriched within a magnetite beforsite (MB) unit, and REE oxides are most concentrated in a barite beforsite unit. The carbonatite intrudes Proterozoic country rocks. Efforts to explore the carbonatite have used geophysical data and drilling. A high-resolution airborne gravity gradient and magnetic survey was flown over the carbonatite in 2012. The carbonatite is associated with a roughly annular vertical gravity gradient high and a subdued central low and a central magnetic high surrounded by magnetic field values lower than those over the country rocks. Geophysical, borehole, and physical property data are combined for an interpretation of these signatures. The carbonatite is denser than the country rocks, explaining the gravity gradient high. Most carbonatite lithologies have weaker magnetic susceptibilities than those of the country rocks, explaining why the carbonatite does not produce a magnetic high at its margin. The primary source of the central magnetic high is interpreted to be mafic rocks that are strongly magnetized and are present in large volumes. MB is very dense (mean density 3200 kg/m 3 ) and strongly magnetized (median 0.073 magnetic susceptibility), producing a gravity gradient high and contributing to the aeromagnetic high. Barite beforsite has physical properties similar to most of the carbonatite volume, making it a poor geophysical target. Geophysical anomalies indicate the presence of dense and strongly magnetized rocks at depths below existing boreholes, either a large volume of MB or another unknown lithology.

Nebraska↗
USGS2002

A pitfall in shallow shear-wave refraction surveying

The shallow shear-wave refraction method works successfully in an area with a series of horizontal layers. However, complex near-surface geology may not fit into the assumption of a series of horizontal layers. That a plane SH-wave undergoes wave-type conversion along an interface in an area of nonhorizontal layers is theoretically inevitable. One real example shows that the shallow shear-wave refraction method provides velocities of a converted wave rather than an SH- wave. Moreover, it is impossible to identify the converted wave by refraction data itself. As most geophysical engineering firms have limited resources, an additional P-wave refraction survey is necessary to verify if velocities calculated from a shear-wave refraction survey are velocities of converted waves. The alternative at this time may be the surface wave method, which can provide reliable S-wave velocities, even in an area of velocity inversion (a higher velocity layer underlain by a lower velocity layer). ?? 2002 Elsevier Science B.V. All rights reserved.

Journal of Applied Geophysics↗
USGS1993

Borehole techniques identifying subsurface chimney heights in loose ground-some experiences above underground nuclear explosions

The location of the subsurface top of the chimney formed by the collapse of the cavity resulting from an underground nuclear explosion is examined at five sites at the Nevada Test Site. The chimneys were investigated by drilling, coring, geophysical logging (density, gamma-ray, caliper), and seismic velocity surveys. The identification of the top of the chimney can be complicated by chimney termination in friable volcanic rock of relatively high porosity. The presence of an apical void in three of the five cases is confirmed as the chimney horizon by coincidence with anomalies observed in coring, caliper and gamma-ray logging (two cases), seismic velocity, and drilling. In the two cases where an apical void is not present, several of these techniques yield anomalies at identical horizons, however, the exact depth of chimney penetration is subject to some degree of uncertainty. This is due chiefly to the extent to which core recovery and seismic velocity may be affected by perturbations in the tuff above the chimney due to the explosion and collapse. The data suggest, however, that the depth uncertainty may be only of the order of 10 m if several indicators are available. Of all indicators, core recovery and seismic velocity indicate anomalous horizons in every case. Because radiation products associated with the explosion are contained within the immediate vicinity of the cavity, gamma-ray logs are generally not diagnostic of chimney penetration. In no case is the denisty log indicative of the presence of the chimney. ?? 1993.

International Journal of Rock Mechanics and Mining↗
USGS2026

Understanding the resource potential of natural hydrogen on Earth: Scientific gaps, uncertainties and recommendations

A comprehensive scientific research roadmap is essential to bridge knowledge gaps and deepen the understanding of key geological, geochemical, and geophysical aspects of natural hydrogen (H 2 ) as a potential new energy resource. This paper reviews major scientific uncertainties on natural H 2 , suggesting research priorities, as a guide for defining exploration strategies, techniques, and data interpretation. The uncertainties concern all phases of the natural H 2 cycle, from generation (source rocks) through migration (advection and diffusion) and accumulation (reservoir and cap rocks) to the application and interpretation of subsurface and surface geochemical and geophysical exploration techniques. Understanding H 2 sources and generation rates (the amount of H 2 generated by a given volume of rock over time) is crucial for determining whether a geological H 2 system operates as a short-term dynamic system with rapid H 2 production and release, or as a conventional gas system with long-term accumulations, analogous to petroleum reservoirs. Preliminary estimates for serpentinisation, radiolysis, and organic matter degradation suggest that H 2 generation is not inherently fast, especially for non-hydrothermal continental systems (crystalline basement of shields, ophiolites, peridotite massifs, sedimentary basins), and long-term accumulations, like those of fossil natural gas systems, represent the most likely scenario. The mechanisms of H 2 migration through geological formations require application of fundamental principles of fluid-flow physics, distinguishing advection and diffusion, as well as their forms (from gas-phase, bubble flows to aqueous solutions). Additional studies of H 2 accumulation and retention in subsurface reservoirs could improve understanding of mechanisms of H 2 migration by focusing on the rock fluid-bearing properties and the factors affecting H 2 preservation, such as the presence of cap rocks impermeable to H 2 , pressure conditions, residence times, and microbial or abiotic consumption. Advanced techniques, including reservoir modelling, flow simulations, 3D imaging (micro-CT) of H 2 -bearing rocks, and extraction and analysis of gas occluded in rocks, can provide insights into the stability and potential recoverability of H 2 accumulations. The interpretation of surface exploration techniques, including gas geochemistry, geophysics, and remote sensing, long employed in mineral and energy resource exploration, is now being adapted for natural H 2 studies, but challenges remain in the data interpretation. Distinguishing H 2 seepage due to geological degassing from H 2 produced near the surface by modern microbial processes or artificial sources, such as hammering or drilling for soil-gas sampling, drilling into aquifers, and corrosion in boreholes, is an essential step in exploration. The simple detection of H 2 in soils, even in morphological structures like sub-circular depressions or “fairy circles”, cannot be cursorily interpreted as a signal of natural H 2 seepage from a deep source. A holistic geochemical approach, including isotopic analyses of gases associated with H 2 , is recommended to distinguish among the variety of possible H 2 origins. Observations of H 2 in wells should be interrogated to rule out possible artifacts such as corrosion and drill bit metamorphism. The integration of multiple geophysical methods, including seismic, gravimetric, magnetic, and electro-magnetic surveys, is recommended to mitigate interpretation ambiguities regarding the structure of a subsurface H 2 system (source and reservoir rocks, including fluid and gas storage), due to the non-uniqueness of rock-specific physical properties.

Earth-Science Reviews↗
USGS1992

The Alaska Mineral Resource Assessment Program: Background information to accompany geologic and mineral-resource maps of the Cordova and Middleton Island quadrangles, southern Alaska

This report summarizes recent results of integrated geological, geochemical, and geophysical field and laboratory studies conducted by the U.S. Geological Survey in the Cordova and Middleton Island 1°x3° quadrangles of coastal southern Alaska. Published open-file reports and maps accompanied by descriptive and interpretative texts, tables, diagrams, and pertinent references provide background information for a mineral-resource assessment of the two quadrangles. Mines in the Cordova and Middleton Island quadrangles produced copper and byproduct gold and silver in the first three decades of the 20th century. The quadrangles may contain potentially significant undiscovered resources of precious and base metals (gold, silver, copper, zinc, and lead) in veins and massive sulfide deposits hosted by Cretaceous and Paleogene sedimentary and volcanic rocks. Resources of manganese also may be present in the Paleogene rocks; uranium resources may be present in Eocene granitic rocks; and placer gold may be present in beach sands near the mouth of the Copper River, in alluvial sands within the canyons of the Copper River, and in smaller alluvial deposits underlain by rocks of the Valdez Group. Significant coal resources are present in the Bering River area, but difficult access and structural complexities have discouraged development. Investigation of numerous oil and gas seeps near Katalla in the eastern part of the area led to the discovery of a small, shallow field from which oil was produced between 1902 and 1933. The field has been inactive since, and subsequent exploration and drilling onshore near Katalla in the 1960's and offshore near Middleton Island on the outer continental shelf in the 1970's and 1980's was not successful.

Alaska↗
USGS1995

The Alaska Mineral Resource Assessment Program: Background information to accompany geologic and mineral-resource maps of the Killik River 1°x3° quadrangle, northern Alaska

This report summarizes results of integrated geological, geochemical, and geophysical field and laboratory studies conducted by the U.S. Geological Survey in the Killik River 1°x3° quadrangle, Brooks Range, northern Alaska. These studies were designed to provide an assessment of the mineral resources of the quadrangle. The geological and geochemical data were the primary sources of information used to assess the mineral-resource potential of the quadrangle. The presence of permissive host rocks and favorable geochemical signatures in stream- and lake-sediment and (or) heavy-mineral-concentrate samples were used to infer the potential for undiscovered resources of minerals in deposits of different types. The Killik River quadrangle may contain undiscovered resources of preciousand base-metals (principally lead, silver, and zinc) in veins and breccias hosted by Devonian and Mississippian clastic sedimentary rocks or in stratiform massive sulfide deposits hosted primarily by Mississippian and Pennsylvanian sedimentary rocks. Resources of barium, phosphate, and manganese may be present in Mississippian to Jurassic sedimentary rocks. Cretaceous fluvial sedimentary rocks in the northern part of the quadrangle are permissive hosts for uranium deposits, as well as for placer deposits of heavy minerals such as gold and chromite; however, geochemical data suggest that the potential for deposits of this type is low. Numerous coal beds are present in the Cretaceous rocks throughout the northern part of the quadrangle, but the limited thickness and lateral extent of most of the beds reduce their resource potential. Although the southern third of the quadrangle has no potential for petroleum resources, there is potential in the northern two-thirds.

Alaska↗
USGS1995

The origin of granites and related rocks

This Circular is a compilation of abstracts for posters and oral presentations given at the third Hutton symposium on the Origin of granites and related rocks. The symposium was co-sponsored by the Department of Geology, University of Maryland at College Park; the U.S. Geological Survey, Reston, Virginia; and the Department of Terrestrial Magnetism and Geophysical Laboratory, Carnegie Institution of Washington.

Circular↗
USGS1987

Maps showing distribution of the Middle Cretaceous unconformity in the eastern Gulf of Mexico

Several theories on the origin of the Gulf of Mexico basin have been introduced by various researchers (Beloussov, 1970; Freeland and Dietz, 1971; Malfait and Dinkelman, 1972; Wood and Walper, 1974; Pilger, 1978; Buffler and others, 1980; Dickinson and Coney, 1980; Gose and others, 1980; Schmidt-Effing, 1980; Walper, 1980; Schlager and others, 1984). Although no final agreement has been reached, one prominent geologic feature is generally recognized. The early evolution of the basin ended with a major middle Cretaceous event resulting in a Gulf-wide unconformity referred to as the middle Cretaceous unconformity (MCU). This event represents a major shift from Early Cretaceous shallow-water bank sedimentation to Late Cretaceous deeper water carbonates (Worzel and others, 1973; Mitchum, 1978). Seismic data collected by the U.S. Geological Survey and the University of Texas Marine Science Institute, Galveston Geophysics Laboratory (UTMSI-GGL) were used to map the MCU and its relationship to the deep stratigraphy and structure of the eastern Gulf basin east of long 90° W. In addition, data from the Deep Sea Drilling Project (DSDP) in the southeastern Gulf and along the Campeche Escarpment and dredge samples collected by Schlager and others (1984) from the Florida Escarpment provide an age for the MCU (Cenomanian, 97 m. y. ) and a detailed lithological record. This report emphasizes the salt diapirs, pillows, and ridges in the northeastern Gulf of Mexico because of the profound effect these geologic structures have on the MCU. Salt locations are shown on the isopach of post-MCU sediments (fig. 1). A second map shows pre-middle Cretaceous outcrops terminated by the MCU along the Florida Escarpment, the southeastern Gulf, and the Campeche Escarpment (fig. 2).

Miscellaneous Field Studies Map↗
USGS2010

USGS exploration geochemistry studies at the Pebble porphyry Cu-Au-Mo deposit, Alaska— Pdf of presentation

From 2007 through 2010, scientists in the U.S. Geological Survey (USGS) have been conducting exploration-oriented geochemical and geophysical studies in the region surrounding the giant Pebble porphyry Cu-Au-Mo deposit in southwestern Alaska. The Cretaceous Pebble deposit is concealed under tundra, glacial till, and Tertiary cover rocks, and is undisturbed except for numerous exploration drill holes. These USGS studies are part of a nation-wide research project on evaluating and detecting concealed mineral resources. This report focuses on exploration geochemistry and comprises illustrations and associated notes that were presented as a case study in a workshop on this topic. The workshop, organized by L.G. Closs and R. Glanzman, is called 'Geochemistry in Mineral Exploration and Development,' presented by the Society of Economic Geologists at a technical conference entitled 'The Challenge of Finding New Mineral Resources: Global Metallogeny, Integrative Exploration and New Discoveries,' held at Keystone, Colorado, October 2-5, 2010.

Alaska↗