Geology ReportsSearch

USGS · 70030885

Estimation of elastic moduli in a compressible Gibson half-space by inverting Rayleigh-wave phase velocity

Abstract

A Gibson half-space model (a non-layered Earth model) has the shear modulus varying linearly with depth in an inhomogeneous elastic half-space. In a half-space of sedimentary granular soil under a geostatic state of initial stress, the density and the Poisson's ratio do not vary considerably with depth. In such an Earth body, the dynamic shear modulus is the parameter that mainly affects the dispersion of propagating waves. We have estimated shear-wave velocities in the compressible Gibson half-space by inverting Rayleigh-wave phase velocities. An analytical dispersion law of Rayleigh-type waves in a compressible Gibson half-space is given in an algebraic form, which makes our inversion process extremely simple and fast. The convergence of the weighted damping solution is guaranteed through selection of the damping factor using the Levenberg-Marquardt method. Calculation efficiency is achieved by reconstructing a weighted damping solution using singular value decomposition techniques. The main advantage of this algorithm is that only three parameters define the compressible Gibson half-space model. Theoretically, to determine the model by the inversion, only three Rayleigh-wave phase velocities at different frequencies are required. This is useful in practice where Rayleigh-wave energy is only developed in a limited frequency range or at certain frequencies as data acquired at manmade structures such as dams and levees. Two real examples are presented and verified by borehole S-wave velocity measurements. The results of these real examples are also compared with the results of the layered-Earth model. ?? Springer 2006.

Explore related subjects

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

J. Xia, Y. Xu, R. D. Miller, C. Chen. 2006. Estimation of elastic moduli in a compressible Gibson half-space by inverting Rayleigh-wave phase velocity. https://doi.org/10.1007/s10712-005-7261-3

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related USGS reports

Imaging spectroscopy for the detection, assessment and monitoring of natural and anthropogenic hazards

Natural and anthropogenic hazards have the potential to impact all aspects of society including its economy and the environment. Diagnostic data to inform decision-making are critical for hazard management whether for emergency response, routine monitoring or assessments of potential risks. Imaging spectroscopy (IS) has unique contributions to make via the ability to provide some key quantitative diagnostic information. In this paper, we examine a selection of key case histories representing the state of the art to gain an insight into the achievements and perspectives in the use of visible to shortwave infrared IS for the detection, assessment and monitoring of a selection of significant natural and anthropogenic hazards. The selected key case studies examined provide compelling evidence for the use of the IS technology and its ability to contribute diagnostic information currently unattainable from operational spaceborne Earth observation systems. User requirements for the applications were also evaluated. The evaluation showed that the projected launch of spaceborne IS sensors in the near-, mid and long term future, together with the increasing availability, quality and moderate cost of off the shelf sensors, the possibilities to couple unmanned autonomous systems with miniaturized sensors, should be able to meet these requirements. The challenges and opportunities for the scientific community in the future when such data become available will then be ensuring consistency between data from different sensors, developing techniques to efficiently handle, process, integrate and deliver the large volumes of data, and most importantly translating the data to information that meets specific needs of the user community in a form that can be digested/understood by them. The latter is especially important to transforming the technology from a scientific to an operational tool. Additionally, the information must be independently validated using current trusted practices and uncertainties quantified before IS derived measurement can be integrated into operational monitoring services.

Colorado

Application of microtremor horizontal-to-vertical spectral ratio (MHVSR) analysis for site characterization: State of the art

Nakamura (Q Rep Railway Tech Res Inst 30:25–33, 1989) p opularized the application of the horizontal-to-vertical spectral ratio (HVSR) analysis of microtremor (seismic noise or ambient vibration) recordings to estimate the predominant frequency and amplification factor of earthquake shaking. During the following quarter century, popularity in the microtremor HVSR (MHVSR) method grew; studies have verified the stability of a site’s MHVSR response over time and validated the MHVSR response with that of earthquake HVSR response. Today, MHVSR analysis is a popular reconnaissance tool used worldwide for seismic microzonation and earthquake site characterization in numerous regions, specifically, in the mapping of site period or fundamental frequency and inverted for shear-wave velocity depth profiles, respectively. However, the ubiquity of MHVSR analysis is predominantly a consequence of its ease in application rather than our full understanding of its theory. We present the state of the art in MHVSR analyses in terms of the development of its theoretical basis, current state of practice, and we comment on its future for applications in earthquake site characterization.

Surveys in Geophysics

Vegetation index methods for estimating evapotranspiration by remote sensing

Evapotranspiration (ET) is the largest term after precipitation in terrestrial water budgets. Accurate estimates of ET are needed for numerous agricultural and natural resource management tasks and to project changes in hydrological cycles due to potential climate change. We explore recent methods that combine vegetation indices (VI) from satellites with ground measurements of actual ET (ETa) and meteorological data to project ETa over a wide range of biome types and scales of measurement, from local to global estimates. The majority of these use time-series imagery from the Moderate Resolution Imaging Spectrometer on the Terra satellite to project ET over seasons and years. The review explores the theoretical basis for the methods, the types of ancillary data needed, and their accuracy and limitations. Coefficients of determination between modeled ETa and measured ETa are in the range of 0.45–0.95, and root mean square errors are in the range of 10–30% of mean ETa values across biomes, similar to methods that use thermal infrared bands to estimate ETa and within the range of accuracy of the ground measurements by which they are calibrated or validated. The advent of frequent-return satellites such as Terra and planed replacement platforms, and the increasing number of moisture and carbon flux tower sites over the globe, have made these methods feasible. Examples of operational algorithms for ET in agricultural and natural ecosystems are presented. The goal of the review is to enable potential end-users from different disciplines to adapt these methods to new applications that require spatially-distributed ET estimates.

Surveys in Geophysics