Results for “Engineering Structures” — Page 52

USGS2001

The National Map - Lake Tahoe Area Pilot Project

Governments depend on a common set of geographic base information as a tool for economic and community development, land and natural resource management, and health and safety services. Emergency management and defense operations rely on this information. Private industry, nongovernmental organizations, and individual citizens use the same geographic data. Geographic information underpins an increasingly large part of the Nation's economy. Available geographic data often have the following problems: * They do not align with each other because layers are frequently created or revised separately, * They do not match across administrative boundaries because each producing organization uses different methods and standards, and * They are not up to date because of the complexity and cost of revision. The U.S. Geological Survey (USGS) is developing The National Map to be a seamless, continuously maintained, and nationally consistent set of online, public domain, geographic base information to address these issues. The National Map will serve as a foundation for integrating, sharing, and using other data easily and consistently. In collaboration with other government agencies, the private sector, academia, and volunteer groups, the USGS will coordinate, integrate, and, where needed, produce and maintain base geographic data. The National Map will include digital orthorectified imagery; elevation data; vector data for hydrography, transportation, boundary, and structure features; geographic names; and land cover information. The data will be the source of revised paper topographic maps. Many technical and institutional issues must be resolved as The National Map is implemented. To begin the refinement of this new paradigm, pilot projects are being designed to identify and investigate these issues. The pilots are the foundation upon which future partnerships for data sharing and maintenance will be built.

Fact Sheet↗

USGS2001

The National Map - Utah Transportation Pilot Project

Governments depend on a common set of geographic base information as a tool for economic and community development, land and natural resource management, and health and safety services. Emergency management and defense operations rely on this information. Private industry, nongovernmental organizations, and individual citizens use the same geographic data. Geographic information underpins an increasingly large part of the Nation's economy. Available geographic data often have the following problems: * They do not align with each other because layers are frequently created or revised separately, * They do not match across administrative boundaries because each producing organization uses different methods and standards, and * They are not up to date because of the complexity and cost of revision. The U.S. Geological Survey (USGS) is developing The National Map to be a seamless, continuously maintained, and nationally consistent set of online, public domain, geographic base information to address these issues. The National Map will serve as a foundation for integrating, sharing, and using other data easily and consistently. In collaboration with other government agencies, the private sector, academia, and volunteer groups, the USGS will coordinate, integrate, and, where needed, produce and maintain base geographic data. The National Map will include digital orthorectified imagery; elevation data; vector data for hydrography, transportation, boundary, and structure features; geographic names; and land cover information. The data will be the source of revised paper topographic maps. Many technical and institutional issues must be resolved as The National Map is implemented. To begin the refinement of this new paradigm, pilot projects are being designed to identify and investigate these issues. The pilots are the foundation upon which future partnerships for data sharing and maintenance will be built.

Fact Sheet↗

USGS2001

The National Map - Texas Pilot Project

Governments depend on a common set of geographic base information as a tool for economic and community development, land and natural resource management, and health and safety services. Emergency management and defense operations rely on this information. Private industry, nongovernmental organizations, and individual citizens use the same geographic data. Geographic information underpins an increasingly large part of the Nation's economy. Available geographic data often have the following problems: * They do not align with each other because layers are frequently created or revised separately, * They do not match across administrative boundaries because each producing organization uses different methods and standards, and * They are not up to date because of the complexity and cost of revision. The U.S. Geological Survey (USGS) is developing The National Map to be a seamless, continuously maintained, and nationally consistent set of online, public domain, geographic base information to address these issues. The National Map will serve as a foundation for integrating, sharing, and using other data easily and consistently. In collaboration with other government agencies, the private sector, academia, and volunteer groups, the USGS will coordinate, integrate, and, where needed, produce and maintain base geographic data. The National Map will include digital orthorectified imagery; elevation data; vector data for hydrography, transportation, boundary, and structure features; geographic names; and land cover information. The data will be the source of revised paper topographic maps. Many technical and institutional issues must be resolved as The National Map is implemented. To begin the refinement of this new paradigm, pilot projects are being designed to identify and investigate these issues. The pilots are the foundation upon which future partnerships for data sharing and maintenance will be built.

Fact Sheet↗

USGS2001

The National Map - Pennsylvania Pilot Project

Governments depend on a common set of geographic base information as a tool for economic and community development, land and natural resource management, and health and safety services. Emergency management and defense operations rely on this information. Private industry, nongovernmental organizations, and individual citizens use the same geographic data. Geographic information underpins an increasingly large part of the Nation's economy. Available geographic data often have the following problems: * They do not align with each other because layers are frequently created or revised separately, * They do not match across administrative boundaries because each producing organization uses different methods and standards, and * They are not up to date because of the complexity and cost of revision. The U.S. Geological Survey (USGS) is developing The National Map to be a seamless, continuously maintained, and nationally consistent set of online, public domain, geographic base information to address these issues. The National Map will serve as a foundation for integrating, sharing, and using other data easily and consistently. In collaboration with other government agencies, the private sector, academia, and volunteer groups, the USGS will coordinate, integrate, and, where needed, produce and maintain base geographic data. The National Map will include digital orthorectified imagery; elevation data; vector data for hydrography, transportation, boundary, and structure features; geographic names; and land cover information. The data will be the source of revised paper topographic maps. Many technical and institutional issues must be resolved as The National Map is implemented. To begin the refinement of this new paradigm, pilot projects are being designed to identify and investigate these issues. The pilots are the foundation upon which future partnerships for data sharing and maintenance will be built.

Fact Sheet↗

USGS2001

The National Map - Florida Pilot Project

Governments depend on a common set of geographic base information as a tool for economic and community development, land and natural resource management, and health and safety services. Emergency management and defense operations rely on this information. Private industry, nongovernmental organizations, and individual citizens use the same geographic data. Geographic information underpins an increasingly large part of the Nation's economy. Available geographic data often have the following problems: * They do not align with each other because layers are frequently created or revised separately, * They do not match across administrative boundaries because each producing organization uses different methods and standards, and * They are not up to date because of the complexity and cost of revision. The U.S. Geological Survey (USGS) is developing The National Map to be a seamless, continuously maintained, and nationally consistent set of online, public domain, geographic base information to address these issues. The National Map will serve as a foundation for integrating, sharing, and using other data easily and consistently. In collaboration with other government agencies, the private sector, academia, and volunteer groups, the USGS will coordinate, integrate, and, where needed, produce and maintain base geographic data. The National Map will include digital orthorectified imagery; elevation data; vector data for hydrography, transportation, boundary, and structure features; geographic names; and land cover information. The data will be the source of revised paper topographic maps. Many technical and institutional issues must be resolved as The National Map is implemented. To begin the refinement of this new paradigm, pilot projects are being designed to identify and investigate these issues. The pilots are the foundation upon which future partnerships for data sharing and maintenance will be built.

Fact Sheet↗

USGS2019

Preliminary report on engineering and geological effects of the July 2019 Ridgecrest earthquake sequence

The Ridgecrest Earthquake sequence included a foreshock event on July 4 2019 (M6.4) and a M7.1 mainshock event on July 5 2019. These events occurred in the Eastern California Shear Zone, near Indian Wells Valley, south of China Lake and west of Searles Valley. GEER has partnered with several organizations to collect perishable data and document the important impacts of these events, including the US Geological Survey, the California Geological Survey, the US Navy, the Southern California Earthquake Center, and local utilities. Critical geotechnical features of this event are extensive left-lateral (M6.4 event) and right-lateral (M7.1 event) surface ruptures over fault segments of variable complexity and width as well as across extensional and compressive step-over zones. We also document lifeline performance at fault crossings (gas, water, electrical), mainshock slip and afterslip, liquefaction and lateral spreading features, and liquefaction effects on structures. These effects are documented using field (ground) mapping and aerial imagery that will support subsequent development of high-resolution digital elevation models. Over 750 ground motions were recorded from the foreshock and mainshock alone, with many additional aftershock records. The data demonstrate significant impacts of site response and rupture directivity on ground motion attributes.

Report↗

USGS1978

Proceedings of Conference IV: the use of volunteers in the Earthquake Hazards Reduction Program, convened under the auspices of National Earthquake Hazards Reduction Program, 2-3 February, 1978, Menlo Park, California

There are tens of thousands of people in the United States who could play an important voluntary role in reducing earthquake hazards and are probably willing to do so. Under the Earthquake Hazard Reduction Act of 1977 the Federal government is significantly increasing its effort "to reduce the risk of life and property from future earthquakes in the United States through the establishment and maintenance of an effective earthquake hazards reduction program." This program involves research, for example, by geologists, seismologists, engineers, sociologists, educators, and public policy experts sponsored primarily by the U.S. Geological Survey and the National Science Foundation. There is a heavy emphasis, however, on the implementation of these results in local communities. When all the research results are available, the benefits of these efforts will depend on whether individual citizens living in earthquake zones accurately perceive the relative importance of earthquake hazards. These individuals can then decide for themselves how to modify their own lifestyles to minimize these hazards. Thus, one of the seven objectives of this national program is "the education of the public, including state and local officials, as to earthquake phenomena, the identification of locations and structures which are especially susceptible to earthquake damage, ways to reduce the adverse consequences of an earthquake, and related matters."

Open-File Report↗

USGS2017

Development of the next generation of seismic design value maps for the 2020 NEHRP Provisions

During the period January 2015 through August 2018, a joint committee of U.S. Geological Survey (USGS) representatives and National Institute of Building Sciences Building Seismic Safety Council (BSSC) volunteers and staff formed a committee to conduct Project 17. The purpose of Project 17 was to formulate recommendations for the rules by which next-generation seismic design value maps, derived from USGS national seismic hazard models, will be developed for adoption by the 2020 National Earthquake Hazard Reduction Program Recommended Provisions for Seismic Regulations of New Buildings and Other Structures (NEHRP Provisions), ASCE 7-22 and the 2024 International Building Code. Two similar projects, Project 97 and Project 07, had been conducted in the past. Each of these projects established, for a period of approximately ten years, the rules by which design ground motion values referenced by the building codes would be developed both by USGS and by private consultants engaged in site-specific studies. Project 17 was originally commissioned in response to issues identified in adopting the 2014 edition of the USGS national seismic hazard model and the design procedures that reference them for use, including the NEHRP Provisions, building codes and referenced standards. Specific issues included: the engineering profession’s discontent with the fluctuating design values portrayed by successive map editions; discovery that the standard spectral shape referenced by the design provisions did not adequately represent ground motion amplitude and spectral character on some sites; and a change in seismologic characterization of the possible size of earthquakes originating on various faults and source zones. Project 17 was funded by the Federal Emergency Management Agency (FEMA), and supported by the USGS with some collaborating experts. An initial planning committee met throughout calendar year 2015 to identify key issues to be considered and to develop a work plan for addressing these as part of the 2020 NEHRP Provisions update cycle. The planning committee recommended an effort of approximately 30-months duration during which the USGS would develop draft design maps based on the rules proposed, to allow evaluation and refinement of the recommendations. A Project 17 Committee (P17C) was empaneled and four task subcommittees were formed, each charged with evaluating one of the key issues identified in the planning effort: Stabilizing mapped values; Definition of Acceptable Risk; Development of multi-period spectral parameter data; and, Definition of procedures for computing deterministic caps, should it be necessary to continue use of such caps in development of the maps. A fifth task subcommittee was formed in 2017 to look at ways to stabilize the seismic design category as an extended effort to stabilize mapped values. The P17C met three times per year throughout 2016, 2017 and 2018 to resolve these issues and develop recommendations for an updated technical basis and procedures to be followed in preparing next-generation seismic design value maps for inclusion in the NEHRP Provisions. The P17C documented these in the form of draft proposals for revision of the NEHRP Provisions. In August 2018, the P17C passed these recommendations to the Provisions Update Committee (PUC) for completion, development of consensus and adoption as appropriate.

Report↗

USGS2005

Accurate elevation and normal moveout corrections of seismic reflection data on rugged topography

The application of the seismic reflection method is often limited in areas of complex terrain. The problem is the incorrect correction of time shifts caused by topography. To apply normal moveout (NMO) correction to reflection data correctly, static corrections are necessary to be applied in advance for the compensation of the time distortions of topography and the time delays from near-surface weathered layers. For environment and engineering investigation, weathered layers are our targets, so that the static correction mainly serves the adjustment of time shifts due to an undulating surface. In practice, seismic reflected raypaths are assumed to be almost vertical through the near-surface layers because they have much lower velocities than layers below. This assumption is acceptable in most cases since it results in little residual error for small elevation changes and small offsets in reflection events. Although static algorithms based on choosing a floating datum related to common midpoint gathers or residual surface-consistent functions are available and effective, errors caused by the assumption of vertical raypaths often generate pseudo-indications of structures. This paper presents the comparison of applying corrections based on the vertical raypaths and bias (non-vertical) raypaths. It also provides an approach of combining elevation and NMO corrections. The advantages of the approach are demonstrated by synthetic and real-world examples of multi-coverage seismic reflection surveys on rough topography. ?? The Royal Society of New Zealand 2005.

New Zealand Journal of Geology and Geophysics↗

USGS2010

Volcanogenic uranium deposits: Geology, geochemical processes, and criteria for resource assessment

Felsic volcanic rocks have long been considered a primary source of uranium for many kinds of uranium deposits, but volcanogenic uranium deposits themselves have generally not been important resources. Until the past few years, resource summaries for the United States or the world generally include volcanogenic in the broad category of "other deposits" because they comprised less than 0.5 percent of past production or estimated resources. Exploration in the United States from the 1940s through 1982 discovered hundreds of prospects in volcanic rocks, of which fewer than 20 had some recorded production. Intensive exploration in the late 1970s found some large deposits, but low grades (less than about 0.10 percent U 3 O 8 ) discouraged economic development. A few deposits in the world, drilled in the 1980s and 1990s, are now known to contain large resources (>20,000 tonnes U 3 O 8 ). However, research on ore-forming processes and exploration for volcanogenic deposits has lagged behind other kinds of uranium deposits and has not utilized advances in understanding of geology, geochemistry, and paleohydrology of ore deposits in general and epithermal deposits in particular. This review outlines new ways to explore and assess for volcanogenic deposits, using new concepts of convection, fluid mixing, and high heat flow to mobilize uranium from volcanic source rocks and form deposits that are postulated to be large. Much can also be learned from studies of epithermal metal deposits, such as the important roles of extensional tectonics, bimodal volcanism, and fracture-flow systems related to resurgent calderas. Regional resource assessment is helped by genetic concepts, but hampered by limited information on frontier areas and undiscovered districts. Diagnostic data used to define ore deposit genesis, such as stable isotopic data, are rarely available for frontier areas. A volcanic environment classification, with three classes (proximal, distal, and pre-volcanic structures), permits use of geologic features on 1:500,000 to 1:100,000 scale maps. Geochemical databases for volcanic rocks are postulated to be more effective than databases for stream sediments or surface radioactivity, both of which tend to be inconsistent because of variable leaching of uranium from soils. Based on empirical associations, spatial associations with areas of wet paleoclimate, adjacent oil and gas fields, or evaporite beds are deemed positive. Most difficult to estimate is the location of depositional traps and reduction zones, in part because they are mere points at regional scale. Grade and tonnage data are reviewed and discussed for 32 deposits in the world. Experience of mining engineers and geologists in Asia suggests that tonnages could be higher than presently known in the Western Hemisphere. Geological analysis, and new data from Asia, suggest a typical or median deposit tonnage of about 5,000 tonnes U 3 O 8 , and an optimistic forecast of discoveries in the range of 5,000 to 20,000 tonnes U 3 O 8 . The likely grade of undiscovered deposits could be about 0.15 percent U 3 O 8 , based on both western and eastern examples. Volcanic terrane is under-explored, relative to other kinds of uranium deposits, and is considered a favorable frontier area for new discoveries.

Open-File Report↗

USGS2011

Rapid estimation of the economic consequences of global earthquakes

The U.S. Geological Survey's (USGS) Prompt Assessment of Global Earthquakes for Response (PAGER) system, operational since mid 2007, rapidly estimates the most affected locations and the population exposure at different levels of shaking intensities. The PAGER system has significantly improved the way aid agencies determine the scale of response needed in the aftermath of an earthquake. For example, the PAGER exposure estimates provided reasonably accurate assessments of the scale and spatial extent of the damage and losses following the 2008 Wenchuan earthquake (Mw 7.9) in China, the 2009 L'Aquila earthquake (Mw 6.3) in Italy, the 2010 Haiti earthquake (Mw 7.0), and the 2010 Chile earthquake (Mw 8.8). Nevertheless, some engineering and seismological expertise is often required to digest PAGER's exposure estimate and turn it into estimated fatalities and economic losses. This has been the focus of PAGER's most recent development. With the new loss-estimation component of the PAGER system it is now possible to produce rapid estimation of expected fatalities for global earthquakes (Jaiswal and others, 2009). While an estimate of earthquake fatalities is a fundamental indicator of potential human consequences in developing countries (for example, Iran, Pakistan, Haiti, Peru, and many others), economic consequences often drive the responses in much of the developed world (for example, New Zealand, the United States, and Chile), where the improved structural behavior of seismically resistant buildings significantly reduces earthquake casualties. Rapid availability of estimates of both fatalities and economic losses can be a valuable resource. The total time needed to determine the actual scope of an earthquake disaster and to respond effectively varies from country to country. It can take days or sometimes weeks before the damage and consequences of a disaster can be understood both socially and economically. The objective of the U.S. Geological Survey's PAGER system is to reduce this time gap to more rapidly and effectively mobilize response. We present here a procedure to rapidly and approximately ascertain the economic impact immediately following a large earthquake anywhere in the world. In principle, the approach presented is similar to the empirical fatality estimation methodology proposed and implemented by Jaiswal and others (2009). In order to estimate economic losses, we need an assessment of the economic exposure at various levels of shaking intensity. The economic value of all the physical assets exposed at different locations in a given area is generally not known and extremely difficult to compile at a global scale. In the absence of such a dataset, we first estimate the total Gross Domestic Product (GDP) exposed at each shaking intensity by multiplying the per-capita GDP of the country by the total population exposed at that shaking intensity level. We then scale the total GDP estimated at each intensity by an exposure correction factor, which is a multiplying factor to account for the disparity between wealth and/or economic assets to the annual GDP. The economic exposure obtained using this procedure is thus a proxy estimate for the economic value of the actual inventory that is exposed to the earthquake. The economic loss ratio, defined in terms of a country-specific lognormal cumulative distribution function of shaking intensity, is derived and calibrated against the losses from past earthquakes. This report describes the development of a country or region-specific economic loss ratio model using economic loss data available for global earthquakes from 1980 to 2007. The proposed model is a potential candidate for directly estimating economic losses within the currently-operating PAGER system. PAGER's other loss models use indirect methods that require substantially more data (such as building/asset inventories, vulnerabilities, and the asset values exposed at the time of earthquake) to implement on a global basis and will thus take more time to develop and implement within the PAGER system.

Open-File Report↗

USGS1998

Chapter B. The Loma Prieta, California, Earthquake of October 17, 1989 - Highway Systems

This paper summarizes the impact of the Loma Prieta earthquake on highway systems. City streets, urban freeways, county roads, state routes, and the national highway system were all affected. There was damage to bridges, roads, tunnels, and other highway structures. The most serious damage occurred in the cities of San Francisco and Oakland, 60 miles from the fault rupture. The cost to repair and replace highways damaged by this earthquake was $2 billion. About half of this cost was to replace the Cypress Viaduct, a long, elevated double-deck expressway that had a devastating collapse which resulted in 42 deaths and 108 injuries. The earthquake also resulted in some positive changes for highway systems. Research on bridges and earthquakes began to be funded at a much higher level. Retrofit programs were started to upgrade the seismic performance of the nation's highways. The Loma Prieta earthquake changed earthquake policy and engineering practice for highway departments not only in California, but all over the world.

Professional Paper↗

USGS2001

High resolution seismic-reflection imaging of shallow deformation beneath the northeast margin of the Manila high at Big Lake, Arkansas

The Manila high, an elliptical area 19 km long (N-S) by 6 km wide (E-W) located west-southwest of Big Lake. Arkansas, has less than 3 m of topographic relief. Geomorphic, stratigraphic and chronology data indicate that Big Lake formed during at least two periods of Holocene uplift and subsequent damming of the south-flowing Little River. Age data of an organic mat located at the base of an upper lacustrine deposit indicates an abrupt, possibly tectonic, formation of the present Big Lake between AD 1640 and 1950. We acquired 7 km of high-resolution seismic-reflection data across the northeastern margin of the Manila high to examine its near-surface bedrock structure and possible association with underlying structures such as the Blytheville arch. Sense of displacement and character of imaged faults support interpretations for either a northwest trending, 1.5 km-wide, block of uplifted strata or a series of parallel northeast-trending faults that bound horst and graben structures. We interpret deformation of the Manila high to result from faulting generated by the reactivation of right-lateral strike-slip fault motion along this portion of the Blytheville arch. The most recent uplift of the Manila high may have occurred during the December 16, 1811, New Madrid earthquake. Published by Elsevier Science B.V.

Engineering Geology↗

USGS2009

Texture-based automated lithological classification using aeromagnetic anomaly images

This report consists of a thesis submitted to the faculty of the Department of Electrical and Computer Engineering, in partial fulfillment of the requirements for the degree of Master of Science, Graduate College, The University of Arizona, 2004 Aeromagnetic anomaly images are geophysical prospecting tools frequently used in the exploration of metalliferous minerals and hydrocarbons. The amplitude and texture content of these images provide a wealth of information to geophysicists who attempt to delineate the nature of the Earth's upper crust. These images prove to be extremely useful in remote areas and locations where the minerals of interest are concealed by basin fill. Typically, geophysicists compile a suite of aeromagnetic anomaly images, derived from amplitude and texture measurement operations, in order to obtain a qualitative interpretation of the lithological (rock) structure. Texture measures have proven to be especially capable of capturing the magnetic anomaly signature of unique lithological units. We performed a quantitative study to explore the possibility of using texture measures as input to a machine vision system in order to achieve automated classification of lithological units. This work demonstrated a significant improvement in classification accuracy over random guessing based on a priori probabilities. Additionally, a quantitative comparison between the performances of five classes of texture measures in their ability to discriminate lithological units was achieved.

Arizona↗

USGS1969

Satellite imagery of the earth

Photography of the Earth from spacecraft has application to both atmospheric and Earth sciences. Gemini and Apollo photographs have furnished information on sea surface roughness, areas of potential upwelling and oceanic current systems. Regional geologic structures and geomorphologic features are also recorded in orbital photographs. Infrared satellite imagery provides meteorological and hydrological data and is potentially useful for locating fresh water springs along coastal areas, sources of geothermal power and volcanic activity. Ground and airborne surveys are being undertaken to create a basis for the interpretation of data obtained from future satellite systems.

Photogrammetric Engineering↗

USGS2013

Seismic Station Installation Orientation Errors at ANSS and IRIS/USGS Stations

Many seismological studies depend on the published orientations of sensitive axes of seismic instruments relative to north (e.g., Li et al., 2011). For example, studies of the anisotropic structure of the Earth’s mantle through SKS‐splitting measurements (Long et al., 2009), constraints on core–mantle electromagnetic coupling from torsional normal‐mode measurements (Dumberry and Mound, 2008), and models of three‐dimensional (3D) velocity variations from surface waves (Ekström et al., 1997) rely on accurate sensor orientation. Unfortunately, numerous results indicate that this critical parameter is often subject to significant error (Laske, 1995; Laske and Masters, 1996; Yoshizawa et al., 1999; Schulte‐Pelkum et al., 2001; Larson and Ekström, 2002). For the Advanced National Seismic System (ANSS; ANSS Technical Integration Committee, 2002), the Global Seismographic Network (GSN; Butler et al., 2004), and many other networks, sensor orientation is typically determined by a field engineer during installation. Successful emplacement of a seismic instrument requires identifying true north, transferring a reference line, and measuring the orientation of the instrument relative to the reference line. Such an exercise is simple in theory, but there are many complications in practice. There are four commonly used methods for determining true north at the ANSS and GSN stations operated by the USGS Albuquerque Seismological Laboratory (ASL), including gyroscopic, astronomical, Global Positioning System (GPS), and magnetic field techniques. A particular method is selected based on site conditions (above ground, below ground, availability of astronomical observations, and so on) and in the case of gyroscopic methods, export restrictions. Once a north line has been determined, it must be translated to the sensor location. For installations in mines or deep vaults, this step can include tracking angles through the one or more turns in the access tunnel leading to the vault (e.g., GSN station WCI in Wyandotte Cave, Indiana). Finally, the third source of error comes from the ability of field engineers to orient the sensor relative to the reference line. In order to quantify bounds on the errors in each step in the orientation process, we conducted a series of tests at the ASL using twelve GSN and ANSS field engineers. The results from this exercise allow us to estimate upper bounds on the precision of our ability to orient instruments, as well as identify the sources of error in the procedures. We are also able to identify systematic bias of various true‐north‐finding methods relative to one another. Although we are unable to estimate the absolute accuracy of our orientation measurements due to our inability to identify true north without some error, the agreement between independent methods for finding true north provides confidence in the different approaches, assuming no systematic bias. Finally, our study neglects orientation errors that are beyond the control of the field engineer during a station visit. These additional errors can arise from deviations in the sensitive axes of the instruments relative to the case markings, processing errors (Holcomb, 2002) when comparing horizontal orientations relative to other sensors (e.g., borehole installations), and deviations of the sensitive axes of instruments from true orthogonality (e.g., instruments with separate modules such as the Streckeisen STS‐1).

Seismological Research Letters↗

USGS2013

Hydrologic data and groundwater flow simulations in the vicinity of Long Lake, Indiana Dunes National Lakeshore, near Gary, Indiana

The U.S. Geological Survey (USGS) collected data and simulated groundwater flow to increase understanding of the hydrology and the effects of drainage alterations to the water table in the vicinity of Long Lake, near Gary, Indiana. East Long Lake and West Long Lake (collectively known as Long Lake) make up one of the largest interdunal lakes within the Indiana Dunes National Lakeshore. The National Park Service is tasked with preservation and restoration of wetlands in the Indiana Dunes National Lakeshore along the southern shoreline of Lake Michigan. Urban development and engineering have modified drainage and caused changes in the distribution of open water, streams and ditches, and groundwater abundance and flow paths. A better understanding of the effects these modifications have on the hydrologic system in the area will help the National Park Service, the Gary Sanitary District (GSD), and local stakeholders manage and protect the resources within the study area. This study used hydrologic data and steady-state groundwater simulations to estimate directions of groundwater flow and the effects of various engineering controls and climatic conditions on the hydrology near Long Lake. Periods of relatively high and low groundwater levels were examined and simulated by using MODFLOW and companion software. Simulated hydrologic modifications examined the effects of (1) removing the beaver dams in US-12 ditch, (2) discontinuing seepage of water from the filtration pond east of East Long Lake, (3) discontinuing discharge from US-12 ditch to the GSD sewer system, (4) decreasing discharge from US-12 ditch to the GSD sewer system, (5) connecting East Long Lake and West Long Lake, (6) deepening County Line Road ditch, and (7) raising and lowering the water level of Lake Michigan. Results from collected hydrologic data indicate that East Long Lake functioned as an area of groundwater recharge during October 2002 and a “flow-through” lake during March 2011, with the groundwater divide south of US-12. Wetlands to the south of West Long Lake act as points of recharge to the surficial aquifer in both dry- and wet-weather conditions. Among the noteworthy results from a dry-weather groundwater flow model simulation are (1) US-12 ditch does not receive water from East Long Lake or West Long Lake, (2) the filtration pond at the east end of East Long Lake, when active, contributed approximately 10 percent of the total water entering East Long Lake, and (3) County Line Road ditch has little effect on simulated water level. Among the noteworthy results from a wet-weather groundwater flow simulation are (1) US-12 ditch does not receive water from East Long Lake or West Long Lake, (2) when the seepage from the filtration pond to the surficial aquifer is not active, sources of inflow to East Long Lake are restricted to only precipitation (46 percent of total) and inflow from the surficial aquifer (54 percent of total), and (3) County Line Road ditch bisects the groundwater divide and creates two water-table mounds south of US-12. The results from a series of model scenarios simulating certain engineering controls and changes in Lake Michigan levels include the following: (1) The simulated removal of beaver dams in US-12 ditch during a wet-weather simulation increased discharge from the ditch to the Gary Sanitary system by 13 percent. (2) Discontinuation of seepage from the filtration pond east of East Long Lake decreased discharge from US-12 ditch to the Gary Sanitary system by 2.3 percent. (3) Simulated discontinuation of discharge from the US-12 ditch to the GSD sewer system increased the area where the water table was estimated to be above the land surface beyond the inundated area in the initial wet-weather simulation. (4) Simulated modifications to the control structure at the discharge point of US-12 ditch to the GSD sewer system can decrease discharge by as much as 61 percent while increasing the simulated inundated area during dry weather and decrease discharge as much as 6 percent while increasing the simulated inundated area during wet weather. (5) Deepening of County Line Road ditch can decrease the discharge from US-12 ditch by 26 percent during dry weather and 24 percent during wet weather, as well as decrease the extent of flooded areas south and east of the filtration pond near Ogden Dunes. (7) The increase of the Lake Michigan water level to match the historical maximum can increase the discharge from US-12 ditch by 14 percent during dry weather and by 9.6 percent during wet weather. (8) The decrease of the Lake Michigan water level to match the historical minimum can decrease the discharge from US-12 ditch by 7.4 percent during dry weather and by 3.1 percent during wet weather. The results of this study can be used by water-resource managers to understand how surrounding ditches affect water levels in East and West Long Lake and in the surrounding wetlands and residential areas. The groundwater model developed in this study can be applied in the future to answer questions about how alterations to the drainage system in the area will affect water levels in East and West Long Lake and surrounding areas. The modeling methods developed in this study provide a template for other studies of groundwater flow and groundwater/surface-water interactions within the shallow surficial aquifer in northern Indiana, and in similar hydrologic settings that include surficial sand aquifers in coastal settings.

Indiana↗

USGS1999

Ozone-induced changes in natural organic matter (NOM) structure

Hydrophobic organic acids (combined humic and fulvic acids), obtained from an Antarctic Lake with predominantly microbially derived organic carbon sources and two US river systems with terrestrial organic carbon sources, were ozonated. Several analyses, including 13 C‐NMR, UV absorbance, fluorescence, hydrophobic/transphilic classification, and potentiometric titrations, were performed before and after ozonation. Ozonation reduced aromatic carbon content, selectively reducing phenolic carbon content. Ozonation of the samples resulted in increased aliphatic, carboxyl, plus acetal and ketal anomeric carbon content and shifted towards less hydrophobic compounds.

Ozone: Science and Engineering↗