Geology Reports⌕ Search

SEARCH · Geology Reports

Results for “Electronics”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 937 records · Page 52Linked to original sources

Origin and significance of tourmaline-rich rocks in the Broken Hill district, Australia

Tourmaline-rich rocks are widespread minor lithologies within the Early Proterozoic Willyama Supergroup in the Broken Hill district, Australia. Tourmaline concentrations occur in strata-bound and local stratiform tourmalinites, clastic metasedimentary rocks, quartz-gahnite lode rocks, stratiform Pb-Zn-Ag sulfide ores, garnet quartzites, strata-bound scheelite deposits, quartz-tourmaline nodules, discordant quartz veins, and granitic pegmatites. Most of the tourmaline-rich rocks are within the Broken Hill Group that hosts the main Pb-Zn-Ag ores.At the Globe mine along the northeast end of the main lodes, tourmalinites are closely associated with Pb-Zn-Ag mineralization and in places are interbedded with Mn-rich garnet quartzites. Galena and other ore minerals occur locally in the cores of recrystallized tourmaline grains in these tourmalinites, indicating that tourmaline and sulfides were present together prior to deformation and high-grade metamorphism. Electron microprobe analyses of tourmalines intergrown with Fe sulfides at the Globe mine show Mg-rich compositions relative to tourmalines in sulfide-free assemblages from the same area, suggesting early (premetamorphic) introduction of boron and Mg enrichment of tourmaline by sulfide-silicate reactions during metamorphism.Combined field and geochemical data indicate that the district tourmalinites represent normal clastic sediments that were metasomatically altered by boron-rich hydrothermal fluids at or below the sediment-water interface. Whole-rock chemical analyses of 33 tourmaline-rich rocks show linear trends of data for major and trace elements that closely resemble the trends observed for unmineralized elastic metasedimentary rocks of the district. Average Fe/Al, Mg/Al, Na/Al, and Ti/Al molar ratios of the tourmaline-rich rocks and clastic metasediments are very similar; the average K/Al molar ratio of the tourmaline-rich rocks is significantly lower than that of the clastic metasediments, reflecting the loss of K during tourmalinite formation. Chondrite-normalized patterns of rare earth elements (REE) in the quartz-rich tourmalinites are generally similar to those of the clastic metasediments, except for minor depletions of light REE; local positive and negative Ce anomalies suggest tourmalinite formation in the presence of seawater or a seawater-derived pore fluid. The geochemical data imply relative immobility of Al, Ti, Cr, and heavy REE during hydrothermal alteration and later metamorphism. Boron isotope analyses of 52 tourmaline separates show a total range of delta 11 B values from -26.8 to -17.0 per mil. Fine-grained, euhedral, nonpoikilitic tourmalines from tourmalinites in the andalusite-muscovite zone in the northern part of the district (e.g., Black Prince mine) have delta 11 B values from -21 to -17 per mil, whereas coarse granoblastic and poikilo-blastic tourmalines from the sillimanite and two-pyroxene granulite zones in the southern part of the district (e.g., Globe mine) have delta 11 B values of-24 to -19 per mil. Tourmalines in strongly retrogressed tourmalinites have delta 11 B values from about -27 to -20 per mil. The observed variations in delta 11 B are consistent with prograde and retrograde metamorphic fractionation of boron isotopes, in which the fluid phase is preferentially enriched in the heavier isotope ( 11 B). Premetamorphic hydrothermal fluids that deposited the Black Prince tourmalinites had delta 11 B values of-8 to -5 per mil at 200 degrees to 300 degrees C, suggesting a boron source from nonmarine evaporite borates.Tourmalinites in the Broken Hill district apparently formed by the same submarine hydrothermal processes as the main Pb-Zn-Ag lodes and the siliceous ferromanganese protoliths of the garnet quartzites. In our model, the hydrothermal system(s) acquired abundant boron by leaching evaporitic borates within the Thackaringa Group, the stratigraphic sequence that underlies the Broken Hill Group and most of the tourmaline concentrations. We suggest that evaporites of the Thackaringa Group provided a source of readily extractable boron for formation of the tourmalinites and also the source of the fluoride, sulfur, and perhaps the carbonate in the main lodes; such evaporites may have been critical for increased metal chloride complexing and transport necessary for deposition of the high-grade Pb-Zn-Ag ores. The Broken Hill deposit may have formed contemporaneously with the Mount Isa and McArthur River Pb-Zn-Ag deposits in similar evaporite-bearing sequences during widespread Early Proterozoic continental rifting.

Economic Geology↗

Applied geochemistry, geology and mineralogy of the northernmost Carlin trend, Nevada

Investigations in the northernmost Carlin trend were undertaken to advance understanding of the geochemical signatures and genesis of precious metal deposits in the trend . Two fundamental geologic relationships near the trend significantly affect regional geochemical distributions: a remarkably intact lower Paleozoic stratigraphic sequence of siliceous rocks in the upper plate of the middle Paleozoic Roberts Mountains thrust, and the widespread repetition of rocks high in the upper plate during late Paleozoic thrusting that thickens the cover above mineralized rock in the lower plate. A compilation of previously published chemical analyses of 440 stream sediment samples and 115 rocks from two 7 1/2-minute quadrangles, as well as new chemical analyses of approximately 1,000 drill core samples in a 1,514 m (4,970 ft) hole through the Rodeo Creek deposit were used to construct three-dimensional element distribution models that highlight metal zonation in the mineralized systems. The Rodeo Creek deposit comprises deep Ag base-metal ± Au-mineralized rock below the Roberts Mountains thrust and contains an unusually high Ag/Au ratio greater than 30. Stacked geochemical halos related to the deposit are confined to the lower plate of the Roberts Mountains thrust and include two horizons of Hg, Cu, and Zn anomalies-as much as 180 m above the deposit-that mostly result from mercurian sphalerite. Extremely subtle indications of mineralization in the upper plate of the Roberts Mountains thrust above the deposit include arsenopyrite overgrowths on small pyrite crystals in 50- to 75-μm-wide clay-carbonate veinlets that lack alteration halos, arsenical rims on small disseminated crystal of recrystallized diagenetic pyrite, and partial replacement of diagenetic pyrite by tennantite. Some of these minerals contain anomalously high Au. However, these As-(Au)-bearing rocks most likely represent another locus of largely untested mineralized rock rather than distal halos related to either the Rodeo Creek or the nearby Dee and Storm gold deposits. Application of micromineralogic techniques helped to identify mineral assemblages that are specific to mineralization and provided an empirical foundation for interpretations of geochemical halos in the Carlin trend . District-scale geochemical patterns of several elements in stream sediments and surface rocks coincide with the northernmost Carlin trend and can be used to explore for Carlin -type deposits. Concentrations of elevated As and Sb in stream sediments (as much as 54 ppm As) have northwest-elongate lobate patterns that clearly outline the trend across a width of approximately 4 km. Arsenic contents of exposed rocks (as much as 90 ppm As) strongly correlate with As contents of derivative stream sediments, and rock contents of Sb show a somewhat lesser but nonetheless strong and similar correspondence. Factor analysis of stream-sediment data shows that those factor scores that are correlated with As, Sb, Au, and Pb also are high along the trend and suggest that mineralized rocks may be present. Although As was not detected by scanning electron microscope-energy dispersive spectrometer (SEM-EDS) studies in heavy mineral concentrates of high-As stream sediments in the Carlin trend , X-ray absorption near-edge spectra (XANES) of selected light fractions of stream sediment samples indicate that Al-bearing phases, such as gibbsite, amorphous Al oxyhydroxides, or aluminosilicate clay minerals host most of the As(V). The best fit, visually and in terms of the lowest residual, was obtained by a model compound of As(V) sorbed to gibbsite. Thus, most As in stream sediments derived from altered rock within the Carlin trend apparently is contained in light fractions. The geochemical character of young, unconsolidated, postmineral deposits that cover mineralized rocks on the Carlin trend partly results from mineralized sources along the trend . Concentration of As in the Miocene Carlin Formation shows an exceptionally well developed progressive increase to about 30 ppm As as altered rock surrounding the trend is approached. Mineralized and/or altered rock fragments probably have been shed directly into the sedimentary basin of the Carlin Formation, and migration of As, now fixed as As(V), also may have occurred in the supergene environment after material was recycled out of the Carlin Formation and into present-day gulleys.

Nevada↗

Hydraulic modeling for lahar hazards at cascades volcanoes

The National Weather Service flood routing model DAMBRK is able to closely replicate field-documented stages of historic and prehistoric lahars from Mt. Rainier, Washington, and Mt. Hood, Oregon. Modeled time-of-travel of flow waves are generally consistent with documented lahar travel-times from other volcanoes around the world. The model adequately replicates a range of lahars and debris flows, including the 230 million km3 Electron lahar from Mt. Rainier, as well as a 10 m3 debris flow generated in a large outdoor experimental flume. The model is used to simulate a hypothetical lahar with a volume of 50 million m3 down the East Fork Hood River from Mt. Hood, Oregon. Although a flow such as this is thought to be possible in the Hood River valley, no field evidence exists on which to base a hazards assessment. DAMBRK seems likely to be usable in many volcanic settings to estimate discharge, velocity, and inundation areas of lahars when input hydrographs and energy-loss coefficients can be reasonably estimated.

Environmental & Engineering Geoscience↗

Paleocene to Middle Miocene planktic foraminifera of the southwestern Salisbury Embayment, Virginia and Maryland: biostratigraphy, allostratigraphy, and sequence stratigraphy

The Paleocene to Middle Miocene sedimentary fill of the southwestern Salisbury Embayment contains a fragmental depositional record, interrupted by numerous local diastems and regional unconformities. Using planktic foraminiferal biostratigraphy, 15 unconformity-bounded depositional units have been identified, assigned to six formations and seven alloformations previously recognized in the embayment. The units correlate with second- and third-order sequences of the Exxon sequence stratigraphy model, and include transgressive and highstand systems tracts. Alloformation, formation, and sequence boundaries are marked by abrupt, scoured, burrowed, erosional surfaces, which display lag deposits, biostratigraphic gaps, and intense reworking of microfossils above and below the boundaries. Paleocene deposits represent the upper parts of upper Pleocene Biochronozones P4 and P5, and rest uncomformably on Cretaceous sedimentary beds of various ages (Maastrichtian to Albian). Lower Eocene deposits represent parts of Biochronozones P6 and P9. Middle Eocene strata represent mainly parts of Biochronozones P11, P12, and P14. Upper Eocene sediments include parts of Biochronozones P15, P16, and P17. Oligocene deposits encompass parts of Biochronozones. N4b to N7 undifferentiated, P21a, and, perhaps, N4a. Lower Miocene deposits encompass parts of Biochronozones N4b to N7 undifferentiated. Middle Miocene strata represent mainly parts of Biochronorones N8, N9, and N10. Nine plates of scanning electron micrographs illustrate the principal planktic foraminifera used to establish the biostratigraphic framework. Two new informal formine of Praeterenuitella praegemma Li, 1987, are introduced.

Journal of Foraminiferal Research↗

Mid-Pliocene planktic foraminifer assemblage of the North Atlantic Ocean

The US Geological Survey Pliocene Research, Interpretation and Synoptic Mapping (PRISM) North Atlantic faunal data set provides a unique, temporally constrained perspective to document and evaluate the quantitative geographic distribution of key mid-Pliocene taxa. Planktic foraminifer census data from within the PRISM time slab (3.29 to 2.97 Ma) at thirteen sites in the North Atlantic Ocean have been analyzed. We have compiled Scanning Electron Micrographs for an atlas of mid-Pliocene assemblages from the North Atlantic with descriptions of each taxon to document the taxonomic concepts that accompany the PRISM data. In mid-Pliocene assemblages, the geographic distributions of extant taxa are similar to their present day distributions, although some are extended to the north. We use the distribution of extinct taxa to assess previous assumptions regarding environmental preferences.

Micropaleontology↗

Design and application of an electromagnetic vibrator seismic source

Vibrational seismic sources frequently provide a higher-frequency seismic wavelet (and therefore better resolution) than other sources, and can provide a superior signal-to-noise ratio in many settings. However, they are often prohibitively expensive for lower-budget shallow surveys. In order to address this problem, I designed and built a simple but effective vibrator source for about one thousand dollars. The "EMvibe" is an inexpensive electromagnetic vibrator that can be built with easy-to-machine parts and off-the-shelf electronics. It can repeatably produce pulse and frequency-sweep signals in the range of 5 to 650 Hz, and provides sufficient energy for recording at offsets up to 20 m. Analysis of frequency spectra show that the EMvibe provides a broader frequency range than the sledgehammer at offsets up to ??? 10 m in data collected at a site with soft sediments in the upper several meters. The EMvibe offers a high-resolution alternative to the sledgehammer for shallow surveys. It is well-suited to teaching applications, and to surveys requiring a precisely-repeatable source signature.

Journal of Environmental & Engineering Geophysics↗

Oxidation and mobilization of selenium by nitrate in irrigation drainage

Selenium (Se) can be oxidized by nitrate (NO − 3 ) from irrigation on Cretaceous marine shale in western Colorado. Dissolved Se concentrations are positively correlated with dissolved NO − 3 concentrations in surface water and ground water samples from irrigated areas. Redox conditions dominate in the mobilization of Se in marine shale hydrogeologic settings; dissolved Se concentrations increase with increasing platinum-electrode potentials. Theoretical calculations for the oxidation of Se by NO − 3 and oxygen show favorable Gibbs free energies for the oxidation of Se by NO − 3 , indicating NO − 3 can act as an electron acceptor for the oxidation of Se. Laboratory batch experiments were performed by adding Mancos Shale samples to zero-dissolved-oxygen water containing 0, 5, 50, and 100 mg/L NO − 3 as N (mg N/L). Samples were incubated in airtight bottles at 25°C for 188 d; samples collected from the batch experiment bottles show increased Se concentrations over time with increased NO − 3 concentrations. Pseudo first-order rate constants for NO − 3 oxidation of Se ranged from 0.0007 to 0.0048/d for 0 to 100 mg N/L NO − 3 concentrations, respectively. Management of N fertilizer applications in Cretaceous shale settings might help to control the oxidation and mobilization of Se and other trace constituents into the environment.

Journal of Environmental Quality↗

Transport and fate of nitrate in a glacial outwash aquifer in relation to ground water age, land use practices, and redox processes

A combination of ground water modeling, chemical and dissolved gas analyses, and chlorofluorocarbon age dating of water was used to determine the relation between changes in agricultural practices, and NO − 3 concentrations in ground water of a glacial outwash aquifer in west-central Minnesota. The results revealed a redox zonation throughout the saturated zone with oxygen reduction occurring near the water table, NO − 3 reduction immediately below it, and then a large zone of ferric iron reduction, with a small area of sulfate (SO 2− 4 ) reduction and methanogenesis (CH 4 ) near the end of the transect. Analytical and NETPATH modeling results supported the hypothesis that organic carbon served as the electron donor for the redox reactions. Denitrification rates were quite small, 0.005 to 0.047 mmol NO − 3 yr −1 , and were limited by the small amounts of organic carbon, 0.01 to 1.45%. In spite of the organic carbon limitation, denitrification was virtually complete because residence time is sufficient to allow even slow processes to reach completion. Ground water sample ages showed that maximum residence times were on the order of 50 to 70 yr. Reconstructed NO − 3 concentrations, estimated from measured NO − 3 and dissolved N gas showed that NO − 3 concentrations have been increasing in the aquifer since the 1940s, and have been above the 714 μmol L −1 maximum contaminant level at most sites since the mid- to late-1960s. This increase in NO − 3 has been accompanied by a corresponding increase in agricultural use of fertilizer, identified as the major source of NO − 3 to the aquifer.

Minnesota↗

Miscellaneous methods for measuring matric or water potential

A variety of techniques to measure matric potential or water potential in the laboratory and in the field are described in this section. The techniques described herein require equilibration of some medium whose matric or water potential can be determined from previous calibration or can be measured directly. Under equilibrium conditions the matric or water potential of the medium is equal to that of the soil. The techniques can be divided into: (i) those that measure matric potential and (ii) those that measure water potential (sum of matric and osmotic potentials). Matric potential is determined when the sensor matrix is in direct contact with the soil, so salts are free to diffuse in or out of the sensor matrix, and the equilibrium measurement therefore reflects matric forces acting on the water. Water potential is determined when the sensor is separated from the soil by a vapor gap, so salts are not free to move in or out of the sensor, and the equilibrium measurement reflects the sum of the matric and osmotic forces acting on the water. Seven different techniques are described in this section. Those that measure matric potential include (i) heat dissipation sensors, (ii) electrical resistance sensors, (iii) frequency domain and time domain sensors, and (iv) electro-optical switches. A method that can be used to measure matric potential or water potential is the (v) filter paper method. Techniques that measure water potential include (vi) the Dew Point Potentiameter (Decagon Devices, Inc., Pullman, WA1) (water activity meter) and (vii) vapor equilibration. The first four techniques are electronically based methods for measuring matric potential. Heat dissipation sensors and electrical resistance sensors infer matric potential from previously determined calibration relations between sensor heat dissipation or electrical resistance and matric potential. Frequency-domain and timedomain matric potential sensors measure water content, which is related to matric potential of the sensor through calibration. Electro-optical switches measure changes in light transmission through thin, nylon filters as they absorb or desorb water in response to changes in matric potential. Heat dissipation sensors and electrical resistance sensors are used primarily in the field to provide information on matric potential. Frequency domain matric potential sensors are new and have not been widely used. Time domain matric potential sensors and electro-optical switches are new and have not been commercialized. For the fifth technique, filter paper is used as the standard matrix. The filter paper technique measures matric potential when the filter paper is in direct contact with soil or water potential when separated from soil by a vapor gap. The Dew Point Potentiameter calculates water potential from the measured dew point and sample temperature. The vapor equilibration technique involves equilibration of soil samples with salt solutions of known osmotic potential. The filter paper, Dew Point Potentiameter, and vapor equilibration techniques are generally used in the laboratory to measure water potential of disturbed field samples or to measure water potential for water retention functions.

Soil Science Society of America Book Series↗

Improved method for measuring water imbibition rates on low-permeability porous media

Existing methods for measuring water imbibition rates are inadequate when imbibition rates are small (e.g., clay soils and many igneous rocks). We developed an improved laboratory method for performing imbibition measurements on soil or rock cores with a wide range of hydraulic properties. Core specimens are suspended from an electronic strain gauge (load cell) in a closed chamber while maintaining the lower end of the core in contact with a free water surface in a constant water level reservoir. The upper end of the core is open to the atmosphere. During imbibition, mass increase of the core is recorded continuously by a datalogger that converts the load cell voltage signal into mass units using a calibration curve. Computer automation allows imbibition rate measurement on as many as eight cores simultaneously and independently. Performance of each component of the imbibition apparatus was evaluated using a set of rock cores (2.5 cm in diameter and 2–5 cm in length) from a signle lithostratigraphic unit composed of non-to-moderately welded ash-flow tuff (a glass-rich pyroclastic rock partially fused by heat and pressure) with porosities ranging from 0.094 to 0.533 m 3 m -3 . Reproducibility of sample handling and testing procedures was demonstrated using replicate measurements. Precision and accuracy of load cell measurements were assessed using mass balance calculations and indicated agreement within a few tenths of a percent of total mass. Computed values of sorptivity, S , ranged from 8.83 × 10 -6 to 4.55 × 10 -4 m s -0.5 . The developed method should prove useful for measuring imbibition rates on a wide range of porous materials.

Soil Science Society of America Journal↗

Phosphate reactivity in long-term poultry litter-amended southern Delaware sandy soils

Eutrophication caused by dissolved P from poultry litter (PL)-amended agricultural soils has been a serious environmental concern in the Delaware-Maryland-Virginia Peninsula (Delmarva), USA. To evaluate state and federal nutrient management strategies for reducing the environmental impact of soluble P from long-term PL-amended Delaware (DE) soils, we investigated (i) inorganic P speciation; (ii) P adsorption capacity; and (iii) the extent of P desorption. Although the electron microprobe (EMP) analyses showed a strong correlation between P and Al/Fe, crystalline Al/Fe-P precipitates were not detected by x-ray diffraction (XRD). Instead, the inorganic P fractionation analyses showed high levels of oxalate extractable P, Al, and Fe fractions (615-858, 1215-1478, and 337-752 mg kg-1, respectively), which were susceptible to slow release during the long-term (30-d) P desorption experiments at a moderately acidic soil pHwater. The labile P in the short-term (24-h) desorption studies was significantly associated with oxalate and F extractable Fe and Al, respectively. This was evident in an 80% reduction maximum in total desorbable P from NH4 oxalate/F pretreated soils. In the adsorption experiments, P was strongly retained in soils at near targeted pH of lime (???6.0), but P adsorption gradually decreased with decreasing pH near the soil pHwater (???5.0). The overall findings suggest that P losses from the can be suppressed by an increase in the P retention capacity of soils via (i) an increase in the number of lime applications to maintain soil pHwater at near targeted pH values, and/or (ii) alum/iron sulfate amendments to provide additional Al- and Fe-based adsorbents. ?? Soil Science Society of America.

Soil Science Society of America Journal↗

Biologic origin of iron nodules in a marine terrace chronosequence, Santa Cruz, California

The distribution, chemistry, and morphology of Fe nodules were studied in a marine terrace soil chronosequence northwest of Santa Cruz, California. The Fe nodules are found at depths <1 m on all terraces. The nodules consisted of soil mineral grains cemented by Fe oxides. The nodules varied in size from 0.5 to 25 mm in diameter. Nodules did not occur in the underlying regolith. The Fe-oxide mineralogy of the nodules was typically goethite; however, a subset of nodules consisted of maghemite. There was a slight transformation to hematite with time. The abundance of soil Fe nodules increased with terrace age on the five terraces studied (aged 65,000-226,000 yr). Scanning electron microscopy (SEM) revealed Fe-oxide-containing fungal hyphae throughout the nodules, including organic structures incorporating fine-grained Fe oxides. The fine-grained nature of the Fe oxides was substantiated by M??ssbauer spectroscopy. Our microscopic observations led to the hypothesis that the nodules in the Santa Cruz terrace soils are precipitated by fungi, perhaps as a strategy to sequester primary mineral grains for nutrient extraction. The fungal structures are fixed by the seasonal wetting and dry cycles and rounded through bioturbation. The organic structures are compacted by the degradation of fungal C with time. ?? Soil Science Society of America. All rights reserved.

Soil Science Society of America Journal↗

Effect of grain-coating mineralogy on nitrate and sulfate storage in the unsaturated zone

Unsaturated-zone sediments and the chemistry of shallow groundwater underlying a small (∼8-km 2 ) watershed were studied to identify the mechanisms responsible for anion storage within the Miocene Bridgeton Formation and weathered Coastal Plain deposits in southern New Jersey. Lower unsaturated-zone sediments and shallow groundwater samples were collected and concentrations of selected ions (including NO 3 − and SO 4 2− ) from 11 locations were determined. Grain size, sorting, and color of the lower unsaturated-zone sediments were determined and the mineralogy of these grains and the composition of coatings were analyzed by petrographic examination, scanning electron microscopy and energy dispersive analysis of x-rays, and quantitative whole-rock x-ray diffraction. The sediment grains, largely quartz and chert (80–94% w/w), are coated with a very fine-grained (<20 μm), complex mixture of kaolinite, halloysite, goethite, and possibly gibbsite and lepidocrocite. The mineral coatings are present as an open fabric, resulting in a large surface area in contact with pore water. Significant correlations between the amount of goethite in the grain coatings and the concentration of sediment-bound SO 4 2− were observed, indicative of anion sorption. Other mineral–chemical relations indicate that negatively charged surfaces and competition with SO 4 2− results in exclusion of NO 3 − from inner sphere exchange sites. The observed NO 3 − storage may be a result of matrix forces within the grain coatings and outer sphere complexation. The results of this study indicate that the mineralogy of grain coatings can have demonstrable effects on the storage of NO 3 − and SO 4 2− in the unsaturated zone.

Vadose Zone Journal↗

Structured heterogeneity in a marine terrace chronosequence: Upland mottling

Soil mottles generally are interpreted as a product of reducing conditions during periods of water saturation. The upland soils of the Santa Cruz, CA, marine terrace chronosequence display an evolving sequence of reticulate mottling from the youngest soil (65 ka) without mottles to the oldest soil (225 ka) with well-developed mottles. The mottles consist of an interconnected network of clay and C-enriched regions (gray, 2.5Y 6/1) bordered by leached parent material (white, 2.5Y 8/1) within a diminishing matrix of oxidized parent material (orange, 7.5YR 5/8). The mottles develop in soils that formed from relatively uniform nearshore sediments and occur below the depth of soil bioturbation. To explore how a presumably wetland feature occurs in an unsaturated upland soil, physical and chemical characteristics of mottle separates (orange, gray, and white) were compared through the deep time represented by the soil chronosequence. Mineralogical, isotopic, and surface-area differences among mottle separates indicate that rhizogenic centimeter-scale mass transfer acting across millennia is an integral part of weathering, pedogenesis, and C and nutrient transfer. Elemental analysis, electron microscopy, and Fe-isotope systematics indicate that mottle development is driven by deep roots together with their fungal and microbial symbionts. Taken together, these data suggest that deep soil horizons on old stable landforms can develop reticulate mottling as the long-term imprint of rhizospheric processes. The processes of rhizogenic mottle formation appear to regulate pedogenesis, nutrients, and C sequestration at depth in unsaturated zones.

California↗

Finchite, Sr(UO2)2(V2O8)·5H2O, a new uranyl sorovanadate with the francevillite anion topology

Finchite (IMA2017-052), Sr(UO 2 ) 2 (V 2 O 8 )·5H 2 O, is the first uranium mineral known to contain essential Sr. The new mineral occurs as yellow-green blades up to ~10 µm in length in surface outcrops of the calcrete-type uranium deposit at Sulfur Springs Draw, Martin County, Texas, U.S.A. Crystals of finchite were subsequently discovered underground in the Pandora mine, La Sal, San Juan County, Utah, U.S.A., as diamond-shaped golden-yellow crystals reaching up to 1 mm. The crystal structure of finchite from both localities was determined using single-crystal X-ray diffraction and is orthorhombic, Pcan, with a = 10.363(6) Å, b = 8.498(5) Å, c = 16.250(9) Å, V = 1431.0(13) Å 3 , Z = 4 (R 1 = 0.0555) from Sulfur Springs Draw; and a = 10.3898(16), b = 8.5326(14), c = 16.3765(3) Å, V = 1451.8(4) Å 3 , Z = 4 (R 1 = 0.0600) from the Pandora mine. Electron-probe microanalysis provided the empirical formula (Sr 0.88 K 0.17 Ca 0.10 Mg 0.07 Al 0.03 Fe 0.02 ) Σ1.20 (UO 2 ) 2 (V 2.08 O 8 )·5H 2 O for crystals from Sulfur Springs Draw, and (Sr 0.50 Ca 0.28 Ba 0.22 K 0.05 ) Σ0.94 (U 0.99 O 2 ) 2 (V 2.01 O 8 )·5H 2 O for crystals from the Pandora mine, based on 17 O atoms per formula unit. The structure of finchite contains uranyl vanadate sheets based upon the francevillite topology. Finchite is a possible immobilization species for both uranium and the dangerous radionuclide 90 Sr because of the relative insolubility of uranyl vanadate minerals in water.

American Mineralogist↗

Fluorine-rich mafic lower crust in the southern Rocky Mountains: The role of pre-enrichment in generating fluorine-rich silicic magmas and porphyry Mo deposits

Fluorine-rich granites and rhyolites occur throughout the southern Rocky Mountains, but the origin of F-enrichment has remained unclear. We test if F-enrichment could be inherited from ancient mafic lower crust by: (1) measuring amphibole compositions, including F and Cl contents, of lower crustal mafic granulite xenoliths from northern Colorado to determine if they are unusually enriched in halogens; (2) analyzing whole-rock elemental and Sr, Nd, and Pb isotopic compositions for upper crustal Cretaceous to Oligocene igneous rocks in Colorado to evaluate their sources; and (3) comparing batch melting models of mafic lower crustal source rocks to melt F and Cl abundances derived from biotite data from the F-rich silicic Never Summer batholith. This approach allows us to better determine if the mafic lower crust was pre-enriched in F, if it is concentrated enough to generate F-rich anatectic melts, and if geochemical data support an ancient lower crustal origin for the F-rich rocks in the southern Rocky Mountains. Electron microprobe analyses of amphibole in lower crustal mafic granulite xenoliths show they contain 0.56–1.38 wt% F and 0.45–0.73 wt% Cl. Titanium in calcium amphibole thermometry indicates that the amphiboles equilibrated at high to ultrahigh temperature conditions (805 to 940 °C), and semiquantitative amphibole thermobarometry indicates the amphiboles equilibrated at 0.5 to 1.0 GPa prior to entrainment in magmas during the Devonian. Mass balance calculations, based on these new measurements, indicate parts of the mafic lower crust in Colorado are at least 3.5 times more enriched in F than average mafic lower crust. Intrusions coeval with the Laramide Orogeny (75 to 38 Ma) pre-date F-rich magmatism in Colorado and have Sr and Nd isotopic compositions consistent with mafic lower crust ± mantle sources, but many of these intrusions contain elevated Sr/Y ratios (>40) that suggest amphibole was a stable phase during magma generation. The F-rich igneous rocks from the Never Summer igneous complex and Colorado Mineral Belt also have Sr and Nd isotopic compositions that overlap with the lower crustal mafic granulite xenoliths, but they have lower Sr/Y, higher Nb and Y abundances, and distinctly less radiogenic 206 Pb/ 204 Pb i compositions than preceding Laramide magmatism. Batch melt modeling indicates low-degree partial melts derived from rocks similar to the mafic lower crustal xenoliths we analyzed can yield silicic melts with >2000 ppm F, similar to estimated F melt concentrations for silicic melts that are interpreted to be parental to evolved leucogranites. We suggest that F-rich silicic melts in the southern Rocky Mountains were sourced from garnet-free mafic lower crust, and that fluid-absent breakdown of amphibole in ultrahigh temperature metamorphic rocks was a key process in their generation. Based on the composition of high-F amphibole measured from lower crustal xenoliths, the temperature of amphibole breakdown and melt generation for these F-enriched source rocks is likely >100 °C higher than similar lower crust with low or average F abundances. As such, these source rocks only melted during periods of unusually high heat flow into the lower crust, such as during an influx of mantle-derived magmas related to rifting or the post-Laramide ignimbrite flare-up in the region. These data have direct implications for the genesis of porphyry Mo mineralization, because they indicate that pre-enrichment of F in the deep crust could be a necessary condition for later anatexis and generation of F-rich magmas.

Colorado, New Mexico↗

Wangyanite, PdNi8S8, a new Pd end-member mineral of the pentlandite group from the J-M reef, Stillwater Complex, Montana, USA

Wangyanite (IMA2024-008a), ideally PdNi 8 S 8 , is a Pd end-member mineral of the pentlandite group that was discovered in the J-M reef of the Stillwater Complex, Montana, USA. Wangyanite occurs as anhedral-subhedral granular crystals 200–400 µm in size, associated with isoferroplatinum, braggite, pentlandite, and chalcopyrite interstitial to plagioclase grains within anorthosite. Wangyanite exhibits a yellowish brown color with a black streak and a metallic luster. It is brittle with uneven fractures, and has a calculated density of 5.14 g/cm 3 . The mineral does not show discernible pleochroism, bireflectance, or anisotropy. It has an average composition of 9.95 wt.% Pd, 31.95 wt.% Ni, 25.02 wt.% Fe, 0.57 wt.% Co, 31.74 wt.% S, totaling 99.23 wt.%. The empirical formula, based on eight sulfur atoms per formula unit, is (Pd 0.76 Co 0.08 ) Σ0.84 (Ni 4.39 Fe 3.60 ) Σ7.99 S 8 . Wangyanite has a cubic cell with a space group of Fm -3 m (#225), having lattice parameters of a = 10.1167(12) Å, V = 1035.4(4) Å 3 , and Z = 4. Its crystal structure has been solved by single-crystal three-dimensional electron diffraction study. The strongest X-ray diffraction lines of wangyanite are claculated at [ d in Å ( I %)( hkl )]: 5.841(14.03)(111), 3.050(100)(311), 1.947(29.16)(115,333), 1.264(11.66)(800), 3.577(8.79)(220), 2.920(20.82)(222), and 2.321(9.34)(331). Wangyanite shares the same crystal structure as pentlandite, but the octahedrally coordinated site is mainly occupied by Pd in wangyanite. Based on the textural features and previous experimental Pd-Fe-Ni-S phase system, wangyanite could form by peritectic reaction between braggite, pentlandite and sulfide liquid. These mineral associations are stable in a Ni-Pd-rich sulfide melt system at about 550 °C or even lower temperature. Therefore, wangyanite can potentially serve as an indicator of the presence of Pd-rich residual melts. The mineral is named in honor of Prof. Christina Yan Wang, a well-known researcher on platinum-group element (PGE) occurrences and enrichment mechanisms in mafic-ultramafic intrusions, notably those deposits related to the Emeishan large igneous province in China.

Montana↗

Solidification and microstructures of binary ice-I/hydrate eutectic aggregates

The microstructures of two-phase binary aggregates of ice-I + salt-hydrate, prepared by eutectic solidification, have been characterized by cryogenic scanning electron microscopy (CSEM). The specific binary systems studied were H 2 O-Na 2 SO 4 , H 2 O-MgSO 4 , H 2 O-NaCl, and H 2 O-H 2 SO 4 ; these were selected based on their potential application to the study of tectonics on the Jovian moon Europa. Homogeneous liquid solutions of eutectic compositions were undercooled modestly (ΔT ~ 1.5 °C); similarly cooled crystalline seeds of the same composition were added to circumvent the thermodynamic barrier to nucleation and to control eutectic growth under (approximately) isothermal conditions. CSEM revealed classic eutectic solidification microstructures with the hydrate phase forming continuous lamellae, discontinuous lamellae, or forming the matrix around rods of ice-I, depending on the volume fractions of the phases and their entropy of dissolving and forming a homogeneous aqueous solution. We quantify aspects of the solidification behavior and microstructures for each system and, with these data, articulate anticipated effects of the microstructure on the mechanical responses of the materials.

American Mineralogist↗