Geology Reports⌕ Search
Home/Archive/USGS

USGS · 70036063

Effect of grain-coating mineralogy on nitrate and sulfate storage in the unsaturated zone

T. J. Reilly·N.S. Fishman·A. L. Baehr
View original source ↗Export metadata ↓

Abstract

Unsaturated-zone sediments and the chemistry of shallow groundwater underlying a small (∼8-km 2 ) watershed were studied to identify the mechanisms responsible for anion storage within the Miocene Bridgeton Formation and weathered Coastal Plain deposits in southern New Jersey. Lower unsaturated-zone sediments and shallow groundwater samples were collected and concentrations of selected ions (including NO 3 − and SO 4 2− ) from 11 locations were determined. Grain size, sorting, and color of the lower unsaturated-zone sediments were determined and the mineralogy of these grains and the composition of coatings were analyzed by petrographic examination, scanning electron microscopy and energy dispersive analysis of x-rays, and quantitative whole-rock x-ray diffraction. The sediment grains, largely quartz and chert (80–94% w/w), are coated with a very fine-grained (<20 μm), complex mixture of kaolinite, halloysite, goethite, and possibly gibbsite and lepidocrocite. The mineral coatings are present as an open fabric, resulting in a large surface area in contact with pore water. Significant correlations between the amount of goethite in the grain coatings and the concentration of sediment-bound SO 4 2− were observed, indicative of anion sorption. Other mineral–chemical relations indicate that negatively charged surfaces and competition with SO 4 2− results in exclusion of NO 3 − from inner sphere exchange sites. The observed NO 3 − storage may be a result of matrix forces within the grain coatings and outer sphere complexation. The results of this study indicate that the mineralogy of grain coatings can have demonstrable effects on the storage of NO 3 − and SO 4 2− in the unsaturated zone.

Explore related subjects

Vadose Zone JournalArticle

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

T. J. Reilly, N.S. Fishman, A. L. Baehr. 2009. Effect of grain-coating mineralogy on nitrate and sulfate storage in the unsaturated zone. https://doi.org/10.2136/vzj2008.0053

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related USGS reports

USGS2026

Network-wide assessment of soil water content calibration and sensitivity to biomass proxies using cosmic-ray neutron sensing in the Roaring Fork Basin, Colorado

Soil water content (SWC) is a key state variable of the climate system but is often uncertain in water balance monitoring, especially in alpine environments. SWC measurements can be challenging in alpine environments due to the topography and rocky soils. In 2022, the US Geological Survey's Next Generation Water Observing System Program began research to evaluate water balance monitoring technologies, including cosmic-ray neutron sensors (CRNS). This work evaluated the uncertainty resulting from network-wide calibration of CRNS for SWC monitoring in an alpine watershed and investigated the stability of the calibration parameters across space and time, focusing on potential influence of biomass dynamics. Fifteen stations with moderated and unmoderated (bare) CRNS were deployed and made operational within the Roaring Fork Basin in west-central Colorado. The root mean squared error of the network-wide calibration using the moderated CRNS was 0.042 or 0.047 cm 3 cm −3 , depending on the calibration equation used. Relative SWC dynamics from CRNS were correlated with the in situ probes with a correlation coefficient of 0.91 or 0.87 (depending on calibration equation). We did not find significant relationships between the calibration parameters and stationary site-specific variables. However, the calibration parameters derived from in situ probe SWC dynamics varied over time and were correlated with biomass proxies of cumulative growing degree-day, cumulative growing season index, and bare neutron counts. Future use of the CRNS network can leverage the reliable relative SWC data from network-wide calibration for watershed modeling and continue to research sensitivity of bare neutron measurements to biomass dynamics.

Colorado↗
USGS2025

Identifying preferential flow from soil moisture time series: Review of methodologies

Identifying and quantifying preferential flow (PF) through soil—the rapid movement of water through spatially-distinct pathways in the subsurface—is vital to understanding how the hydrologic cycle responds to climate, land cover, and anthropogenic changes. In recent decades, methods have been developed that use measured soil moisture time series to identify PF. Because they allow for continuous monitoring and are relatively easy to implement, these methods have become an important tool for recognizing when, where, and under what conditions PF occurs. The methods seek to identify a pattern or quantification that indicates the occurrence of PF. Most commonly, the chosen signature is either (1) a nonsequential response to infiltrated water, in which soil moisture responses do not occur in order of shallowest to deepest, or (2) a velocity criterion, in which newly infiltrated water is detected at depth earlier than is possible by nonpreferential flow processes. Alternative signatures have also been developed that have certain advantages but are less commonly utilized. Choosing among these possible signatures requires attention to their pertinent characteristics, including susceptibility to errors, possible bias toward false negatives or false positives, reliance on subjective judgments, and possible requirements for additional types of data. We review 77 studies that have applied such methods, to highlight important information for readers who want to identify PF from soil moisture data, and to inform those who aim to develop new methods or improve existing ones.

Vadose Zone Journal↗
USGS2023

Field evaluation of semi-automated moisture estimation from geophysics using machine learning

Geophysical methods can provide three-dimensional (3D), spatially continuous estimates of soil moisture. However, point-to-point comparisons of geophysical properties to measure soil moisture data are frequently unsatisfactory, resulting in geophysics being used for qualitative purposes only. This is because (1) geophysics requires models that relate geophysical signals to soil moisture, (2) geophysical methods have potential uncertainties resulting from smoothing and artifacts introduced from processing and inversion, and (3) results from multiple geophysical methods are not easily combined within a single soil moisture estimation framework. To investigate these potential limitations, an irrigation experiment was performed wherein soil moisture was monitored through time, and several surface geophysical datasets indirectly sensitive to soil moisture were collected before and after irrigation: ground penetrating radar, electrical resistivity tomography (ERT), and frequency domain electromagnetics (FDEM). Data were exported in both raw and processed form, and then snapped to a common 3D grid to facilitate moisture prediction by standard calibration techniques, multivariate regression, and machine learning. A combination of inverted ERT data, raw FDEM, and inverted FDEM data was most informative for predicting soil moisture using a random regression forest model (one-thousand 60/40 training/test cross-validation folds produced root mean squared errors ranging from 0.025–0.046 cm 3 /cm 3 ). This cross-validated model was further supported by a separate evaluation using a test set from a physically separate portion of the study area. Machine learning was conducive to a semi-automated model-selection process that could be used for other sites and datasets to locally improve accuracy.

Connecticut↗