Geology Reports⌕ Search

SEARCH · Geology Reports

Results for “Data Science in Science”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

1,642 records · Page 52Linked to original sources
USGS2024

Formation of vertical columnar seismic structures and seafloor depressions by groundwater discharge in the drowned Miami Terrace platform and overlying deep-water carbonates, southeastern Florida

The presence of vertical cross-formational fluid migration passageways within sedimentary basins can profoundly impact aquifer and reservoir fluid-flow and their identification is fundamental to informing management of subsurface fluid resources (groundwater, oil, gas). In an onshore and offshore southeastern part of Florida, 2D/3D seismic-reflection and bathymetry data document ∼153 vertical columnar structures composed of reflection disruptions up to 790 m in the height and averaging 360 m in diameter, and ∼219 subcircular to circular seafloor depressions up to 1334 m wide. Our study focuses on these features found within the offshore shallow-marine carbonate Miami Terrace platform, which drowned approximately at the end of the middle Miocene, and within overlying Plio-Quaternary deep-water carbonate slope and drift deposits. Most columnar structures are rooted in stratiform aquifers of the Miami Terrace platform and associated with faults or fault intersections produced by Eocene and circa late Miocene tectonics. The columns commonly terminate within the platform or as subcircular depressions along an amalgamated karstic and drowning unconformity at the platform top. The columns typically stretch upwards from a zone of deep karst cavity collapse through the Miami Terrace platform with upward decreasing sag on internal reflections. Following drowning and Plio-Quaternary partial burial of the Miami Terrace platform by deep-water deposits, the subcircular depressions and faults along the platform top were points of origin for a second phase of column growth upward into the deep-water deposits. The continuation of deep platform cavity collapse and column evolution produced pockmarks along paleo-seafloors within the deep-water deposits and at the present-day sea floor. The Plio-Quaternary pockmarks formed at water depths too deep to suggest an origin related to meteoric karst above or near sea level, but rather their formation is suggested to be related to cyclic sea level falls that drove increased groundwater head and density gradients, and seafloor discharge of offshore freshened groundwater sourced from the underlying platform. Plausibly, mixing of freshened groundwater and seawater at the seafloor discharge sites drove dissolution of the host deep-water deposits, which together with erosion by groundwater venting and current scouring formed the pockmarks. Seaward of the Plio-Quaternary seafloor pockmarks, at the late-middle Miocene upper slope of the Miami Terrace platform and along the regional karst/drowning unconformity is a slope-parallel band of ∼189 densely distributed subcircular seafloor depressions with diameters up to 1334 m at water depths up to ∼660 m. It is plausible that along the upper slope, faults and fractures produced by gravity-driven slope instability and possibly tectonics formed a dense network of fluid passageways that promoted upward artesian freshened groundwater flow to sites of discharge where mixing with seawater generated limestone dissolution and the depressions. But tectonic uplift may have forced emersion and initial meteoric sinkhole formation circa late Miocene with later enhancement by freshened groundwater discharge and bottom current erosion.

Florida↗
USGS1999

Environmental setting and water-quality issues in the lower Tennessee River basin

The goals of the National Water-Quality Assessment Program are to describe current water-quality conditions for a large part of the Nation's water resources, identify water-quality changes over time, and identify the primary natural and human factors that affect water quality. The lower Tennessee River Basin is one of 59 river basins selected for study. The water-quality assessment of the lower Tennessee River Basin study unit began in 1997. The lower Tennessee River Basin study unit encompasses an area of about 19,500 square miles and extends from Chattanooga, Tennessee, to Paducah, Kentucky. The study unit had a population of about 1.5 million people in 1995. The study unit was subdivided into subunits with relatively homogeneous geology and physiography. Subdivision of the study unit creates a framework to assess the effects of natural and cultural settings on water quality. Nine subunits were delineated in the study unit; their boundaries generally coincide with level III and level IV ecoregion boundaries. The nine subunits are the Coastal Plain, Transition, Western Highland Rim, Outer Nashville Basin, Inner Nashville Basin, Eastern Highland Rim, Plateau Escarpment and Valleys, Cumberland Plateau, and Valley and Ridge.The lower Tennessee River Basin consists of predominantly forest (51 percent) and agricultural land (40 percent). Activities related to agricultural land use, therefore, are the primary cultural factors likely to have a widespread effect on surface- and ground-water quality in the study unit. Inputs of total nitrogen and phosphorus from agricultural activities in 1992 were about 161,000 and 37,900 tons, respectively. About 3.7 million pounds (active ingredient) of pesticides was applied to crops in the lower Tennessee River Basin in 1992. State water-quality agencies identified nutrient enrichment and pathogens as water-quality issues affecting both surface and ground water in the lower Tennessee River Basin. Water-quality data collected by State and Federal agencies between 1980 and 1996 were summarized to characterize surface- and ground-water quality of the subunits with respect to these issues. Median concentrations of nitrogen species generally were less than 1 milligram per liter in surface and ground water in all subunits, and were highest throughout the subunits that had the largest percentages of agricultural land use. Median phosphorus concentrations also were less than 1 milligram per liter in all subunits. Phosphatic limestones present in two subunits had a larger effect on phosphorus concentrations in surface and ground water than did the amount of agricultural land use in these subunits. Median counts of fecal coliform were higher in surface water than in ground water in all subunits. The highest median counts in surface water were in the Valley and Ridge (7,500 colonies per 100 milliliters) and the Outer Nashville Basin subunits (5,000 colonies per 100 milliliters). Highest median counts in ground water were in the Inner and Outer Nashville Basin subunit. Natural setting likely has an important effect with respect to fecal contamination of surface and ground water in the lower Tennessee River Basin.

Alabama, Georgia, Kentucky, Mississippi, Tennessee↗
USGS2024

Post-wildfire debris flows

Post-wildfire debris flows pose severe hazards to communities and infrastructure near and within recently burned mountainous terrain. Intense heat of wildfires changes the runoff characteristics of a watershed by combusting the vegetative canopy, litter, and duff, introducing ash into the soil and creating water repellant soils. Following wildfire, rainfall on bare ground is less able to infiltrate into the fire-altered soils and overland flow is less impeded by vegetation. Rainfall runoff in recently burned areas can erode hillslopes owing to the removal of soil binding organic matter near the soil surface by fire. In channels, loose, dry-ravel deposits composed of sand and gravel are readily entrained by concentrated runoff in channels. Entrainment of soil on hillslopes and in channels bulks up the sediment concentration of the rainfall runoff to generate debris flows capable of transporting boulders and large woody debris. Post-wildfire debris flows can be triggered by rainfall conditions that would typically produce little runoff during unburned conditions. The primary rainfall trigger for post-wildfire debris flows is high intensity rainfall during short duration convective rainstorms or periods of high rainfall intensity embedded within a long-duration frontal storm. Numerous observations of debris flows triggered by storms lasting less than an hour following periods of little to no rainfall indicate that antecedent rainfall is not a requirement for initiation of post-wildfire debris flows. Post-wildfire debris-flow hazard assessment entails estimating probability and magnitude of debris flows in the burned area, estimating debris-flow runout and intensity, and defining rainfall intensity-duration thresholds for debris-flow initiation. In the United States, probability and magnitude is estimated using empirically derived models largely based on data collected in southern California. The models provide maps to identify watersheds and drainage paths where post-wildfire hazards are most pronounced. Rainfall intensity-duration thresholds can be incorporated into flood hazard forecasting tools. Currently, work is underway to identify how to best implement debris-flow runout models in burned areas with efficiency and accuracy. Post-wildfire debris flows have been a long-recognized process in the Transverse Ranges of southern California; however, climate change is driving more frequent wildfires to burn more mountainous terrain throughout the western United States and worldwide. As a result, post-wildfire debris flows are becoming a more common threat in areas where they were once infrequent. As the threat of post-wildfire debris flow expands into new areas, evaluating the hazard becomes challenging because the degree to which wildfire increases debris-flow susceptibility varies from region to region. This chapter summarizes the knowledge to date for evaluating post-wildfire debris-flow susceptibility and hazard assessment. We summarize the characteristics of wildfire burn severity, topography, underlying soil and geology, and rainfall conditions that contribute to making a watershed most likely to produce post-wildfire debris flows. Methods for hazard assessment in the United States and other countries are summarized. We highlight knowledge gaps for how post-wildfire debris-flow susceptibility varies throughout the western United States and worldwide and identify research needs to improve hazard assessment methods in different geographies.

Book chapter↗
USGS2024

Federal lands greenhouse gas emissions and sequestration in the United States: Estimates for 2005–22

In 2016, the Secretary of the U.S. Department of the Interior requested that the U.S. Geological Survey (USGS) produce a publicly available and annually updated database of estimated greenhouse gas emissions associated with the extraction and use of fossil fuels from Federal lands. The first report in this series included emissions estimates from 2005 to 2014 and were reported for 29 States and two offshore areas. Native American and Tribal lands were not included in that analysis. This report recalculates those previous years (2005–14) with updated data and methods and extends the estimates to 2022. Nationwide emissions from fossil fuels produced on Federal lands in 2022 were 1,081.2 million metric tons of carbon dioxide equivalent (MMT CO 2 Eq.) for CO 2 , 33.4 MMT CO 2 Eq. for methane (CH 4 ), and 4.3 MMT CO 2 Eq. for nitrous oxide (N 2 O). Compared to 2005, the 2022 totals represent decreases in emissions for all three greenhouse gases (by 17 percent for CO 2 , 37 percent for CH 4 , and 30 percent for N 2 O). Emissions from fossil fuels produced on Federal lands represent, on average, 21.8 percent of U.S. emissions for CO 2 , 6.1 percent for CH 4 , and 1.3 percent for N 2 O over the 18 years included in this estimate. The trends and relative magnitudes of the greenhouse gas emissions estimated are roughly parallel to the Federal lands fossil fuel production volumes. In 2021, Federal lands of the conterminous United States stored 70,424 MMT CO 2 Eq. in terrestrial ecosystems. Soils stored most of the terrestrial ecosystem carbon (66 percent), followed by live vegetation (25 percent), deadwood (5 percent), and litter (4 percent). Carbon sequestration on Federal lands was highly variable over time, owing primarily to interannual variability in climate and weather, and variability in land use and land cover (LULC) change and disturbances, among these are wildfires and logging. Between 2005 and 2021, Federal lands sequestered an average of 83 MMT CO 2 Eq./yr. By subtracting the cumulative effects of LULC and disturbance-related CO 2 losses to the atmosphere from the total, we estimate that ecosystems at the national level sequestered CO 2 at an annual mean rate of 17 MMT CO 2 Eq./yr in a term called the net ecosystem exchange (NEE). This annual NEE sequestration value represents about 1.4 percent of average fossil fuel emissions over the same period. The USGS estimates presented in this report represent an accounting for the emissions resulting from fossil fuel extraction on Federal lands and the end-use combustion of those fuels, as well as for the sequestration of carbon in terrestrial ecosystems on Federal lands. A combined net CO 2 emissions estimate, which is the difference between the emitted and sequestered CO 2 from both the fossil fuel and ecosystems estimates, provides context for evaluating the greenhouse gas contributions of activities on these lands. The estimates included in this report can provide context for future energy decisions, as well as a basis to track change in the future.

Scientific Investigations Report↗
USGS2025

Cancer risk and estimated lithium exposure in drinking groundwater in the US

Importance Lithium is a naturally occurring element in drinking water and is commonly used as a mood-stabilizing medication. Although clinical studies have reported associations between receiving lithium treatment and reduced cancer risk among patients with bipolar disorder, to our knowledge, the association between environmental lithium exposure and cancer risk has never been studied in the general population. Objectives To evaluate the association between exposure to lithium in drinking groundwater and cancer risk in the general population. Design, Setting, and Participants This cohort study included participants with electronic health record and residential address information but without cancer history at baseline from the All of Us Research Program between May 31, 2017, and June 30, 2022. Participants were followed up until February 15, 2023. Statistical analysis was performed from September 2023 through October 2024. Exposure Lithium concentration in groundwater, based on kriging interpolation of publicly available US Geological Survey data on lithium concentration for 4700 wells across the contiguous US between May 12, 1999, and November 6, 2018. Main Outcome and Measures The main outcome was cancer diagnosis or condition, obtained from electronic health records. Stratified Cox proportional hazards regression models were used to estimate the hazard ratios (HRs) and 95% CIs for risk of cancer overall and individual cancer types for increasing quintiles of the estimated lithium exposure in drinking groundwater, adjusting for socioeconomic, behavioral, and neighborhood-level variables. The analysis was further conducted in the western and eastern halves of the US and restricted to long-term residents living at their current address for at least 3 years. Results A total of 252 178 participants were included (median age, 52 years [IQR, 36-64 years]; 60.1% female). The median follow-up time was 3.6 years (IQR, 3.0-4.3 years), and 7573 incident cancer cases were identified. Higher estimated lithium exposure was consistently associated with reduced cancer risk. Compared with the first (lowest) quintile of lithium exposure, the HR for all cancers was 0.49 (95% CI, 0.31-0.78) for the fourth quintile and 0.29 (95% CI, 0.15-0.55) for the fifth quintile. These associations were found for all cancer types investigated in both females and males, among long-term residents, and in both western and eastern states. For example, for the fifth vs first quintile of lithium exposure for all cancers, the HR was 0.17 (95% CI, 0.07-0.42) in females and 0.13 (95% CI, 0.04-0.38) in males; for long-term residents, the HR was 0.32 (95% CI, 0.15-0.66) in females and 0.24 (95% CI, 0.11-0.52) in males; and the HR was 0.01 (95% CI, 0.00-0.09) in western states and 0.34 (95% CI, 0.21-0.57) in eastern states. Conclusions and Relevance In this cohort study of 252 178 participants, estimated lithium exposure in drinking groundwater was associated with reduced cancer risk. Given the sparse evidence and unknown mechanisms of this association, follow-up investigation is warranted.

contiguous United States↗
USGS2026

Shallow hydrogeologic framework of the Tully Valley mudboil area, Onondaga County, New York

Mudboils have been documented in the Tully Valley in southern Onondaga County, New York, since the late 1890s. Sediment-laden water from the mudboils flows into Onondaga Creek, which empties into Onondaga Lake at Syracuse 15 miles to the north. Turbidity from the mudboils has degraded the water quality of Onondaga Creek despite a series of mitigation efforts that began in the early 1990s. Turbidity mitigation actions presently (2025) being considered include creek relocation and offline sediment settling. In support of these proposed actions during 2021–23, the U.S. Geological Survey, in cooperation with the New York State Department of Environmental Conservation, U.S. Environmental Protection Agency, Onondaga Nation, Onondaga Environmental Institute, and Central New York Regional Planning and Development Board, collected and analyzed geologic, hydrologic, geophysical, and geotechnical data to characterize the shallow hydrogeology along four proposed creek-relocation paths and in the proposed offline settling basin area. The investigation indicated that the four proposed creek-relocation paths, two east of Onondaga Creek and two west of Onondaga Creek, are underlain by sediments including muck, alluvium, mudboil deposits, alluvial-fan sand and gravel, and lacustrine fines. The proposed excavations would penetrate partially to fully saturated conditions: generally, the water table is shallow near the creek and deep on the alluvial fans. The shallowest excavation, about 5 feet below land surface, would be near the creek and primarily in alluvium, and the deepest excavation, as much as 30 feet below land surface, would be in the alluvial-fan deposits. Brackish waters would be penetrated by proposed channel excavations on the eastern side of Onondaga Creek in an area downgradient from a potentially leaking historical salt-exploration borehole and near the main mudboil area. Excavation in these areas likely would provide a continuous source of brackish groundwater to the relocated creek. Proposed channel excavations of muck, soft to very soft lacustrine fines, and mudboil-type sediments in mudboil and suspected mudboil areas would pose an excavation and slope stability challenge and would have the greatest potential to create new mudboils. Proposed channel excavations below the water table on the Rattlesnake Gulf and Rainbow Creek alluvial fans would intercept groundwater and make the constructed streambank susceptible to seepage-induced slope instability. The substantial water-level fluctuation in the sediments of both alluvial fans would aggravate the stability condition. In addition, excavation on the Rattlesnake Gulf alluvial fan would have the potential to affect water-supply springs at the toe of the fan. The proposed offline settling basin area is in the northern part of the Rattlesnake Gulf alluvial fan. Natural and man-made diversions of Rattlesnake Gulf have resulted in saturated conditions in the general area of the proposed basin. The proposed offline settling basin would be excavated in, and berms would be constructed on, alluvial-fan deposits and lacustrine fines. In the proposed basin area, the alluvial deposits overlying the lacustrine fines are less than 10 feet thick. Excavation, berm construction, and loading of the saturated, soft to very soft lacustrine fines may be problematic and require soil strengthening.

New York↗
USGS1996

Hydrogeologic investigation and simulation of ground-water flow in the Upper Floridan Aquifer of north-central Florida and southwestern Georgia and delineation of contributing areas for selected city of Tallahassee, Florida, water-supply wells

A 4-year investigation of the Upper Floridan aquifer and ground-water flow system in Leon County, Florida, and surrounding counties of north-central Florida and southwestern Georgia began in 1990. The purpose of the investigation was to describe the ground-water flow system and to delineate the contributing areas to selected City of Tallahassee, Florida, water-supply wells. The investigation was prompted by the detection of low levels of tetrachloroethylene in ground-water samples collected from several of the city's water-supply wells. Hydrologic data and previous studies indicate that; ground-water flow within the Upper Floridan aquifer can be considered steady-state; the Upper Floridan aquifer is a single water-bearing unit; recharge is from precipitation; and that discharge occurs as spring flow, leakage to rivers, leakage to the Gulf of Mexico, and pumpage. Measured transmissivities of the aquifer ranged from 1,300 ft 2 /d (feet squared per day) to 1,300,000 ft2/d. Steady-state ground-water flow in the Upper Floridan aquifer was simulated using a three-dimensional ground- water flow model. Transmissivities ranging from less than 5,000 ft2/d to greater than 11,000,000 ft 2 /d were required to calibrate to observed conditions. Recharge rates used in the model ranged from 18.0 inches per year in areas where the aquifer was unconfined to less than 2 inches per year in broad areas where the aquifer was confined. Contributing areas to five Tallahassee water-supply wells were simulated by particle- tracking techniques. Particles were seeded in model cells containing pumping wells then tracked backwards in time toward recharge areas. The contributing area for each well was simulated twice, once assuming a porosity of 25 percent and once assuming a porosity of 5 percent. A porosity of 25 percent is considered a reasonable average value for the Upper Floridan aquifer; the 5 percent porosity simulated the movement of ground-water through only solution-enhanced bedding plains and fractures. The contributing areas were generally elliptical in shape, reflecting the influence of the sloping potentiometric surface. The contributing areas delineated for a 5 percent porosity were always much larger than those determined using a 25 percent porosity. The lowest average ground-water velocity computed within a contributing area, using a 25 percent porosity, was 1.0 ft/d (foot per day) and the highest velocity was 1.6 ft/d. The lowest average ground-water velocity, determined using a 5 percent porosity, was 2.4 ft/d and the highest was 7.4 ft/d. The contributing areas for each of the five wells was also determined analytically and compared to the model-derived areas. The upgradient width of the simulated contributing areas were larger than the upgradient width of the analytically determined contributing areas for four of the five wells. The model could more accurately delineate contributing areas because of the ability to simulate wells as partially penetrating and by incorporating complex, three-dimensional aquifer characteristics, which the analytical method could not.

Florida, Georgia↗
USGS2025

Completion summary for monitor wells NRF-17 and NRF-18 at the Naval Reactors Facility, Idaho National Laboratory, Idaho

The U.S. Geological Survey (USGS)—in cooperation with the U.S. Department of Energy (DOE) for the Naval Reactors Laboratory Field Office that supports operations for the Naval Reactors Facility (NRF) located at the Idaho National Laboratory (INL)—drilled and constructed well NRF-17 (formerly borehole USGS 151) and well NRF-18 (formerly borehole USGS 152) for stratigraphic framework analyses and water-quality monitoring at the Idaho National Laboratory (INL) near the NRF, in southeastern Idaho. Borehole USGS 151 was continuously cored from about 48 to 1,070 feet (ft) below land surface (BLS); rotary drilled from approximately 1,070 to 1,720 ft BLS; and re-drilled to complete construction as a monitor well NRF-17, completed to 461 ft BLS. Borehole USGS 152 was continuously cored from approximately 19 to 1,259 ft BLS; rotary drilled from approximately 1,259 to 1,630 ft BLS; and re-drilled to complete construction as a monitor well NRF-18, completed to 450 ft BLS. Geophysical data were examined with photographed core material to record lithologic descriptions and to suggest zones where groundwater flow was anticipated. Basalt flows varied from highly fractured to dense, with high-to-low vesiculation. Well NRF-17 generally was constructed in mostly dense basalt (greater than 75 percent), and well NRF-18 was constructed in primarily fractured and (or) vesicular basalt. In well NRF-17, the well capacity is directly affected by the limited amount of fractured basalt, which serves as the primary pathway for groundwater. This effect was observed during the pumping test conducted after the well's final construction. Single-well aquifer tests were done at wells NRF-17 and NRF-18 to provide estimates of transmissivity and hydraulic conductivity after final well construction and initial well development. Estimated values of transmissivity and hydraulic conductivity for well NRF-17 were 8.81 feet squared per day (ft 2 /d) and 1.04×10 -2 feet per day (ft/d), respectively. Estimated values of transmissivity and hydraulic conductivity for well NRF-18 were 4.77×10 3 ft 2 /d and 5.61 ft/d, respectively. The NRF-17 pump test resulted in 19.41 ft of measured drawdown at a sustained average pumping rate of 3.3 gallons per minute (gal/min). The NRF-18 pump test resulted in 0.55 ft of measured drawdown at a sustained average pumping rate of 31.0 gal/min. Water-quality samples collected from the two wells were analyzed for cations, anions, metals, nutrients, volatile organic compounds, stable isotopes, and radionuclides. Water samples for select inorganic constituents showed concentrations consistent with signatures from tributary valley groundwater with influences from ephemeral surface-water recharge from the Big Lost River. Water-quality samples analyzed for stable isotopes of oxygen and hydrogen are consistent with signatures from tributary valley groundwater and surface-water recharge inputs to the aquifer. No measured water-quality results were greater than their respective maximum contaminant levels for public drinking-water supplies. Inorganic and nutrient water-quality results for well NRF-17 and well NRF-18 suggest the groundwater in this area is potentially affected by industrial wastewater disposal.

Idaho↗
USGS2026

Bedrock geologic map of the Eagle Lake quadrangle, Essex County, New York

The bedrock geology of the 7.5-minute Eagle Lake quadrangle, Essex County, New York, consists of deformed and metamorphosed Mesoproterozoic gneisses of the Adirondack Highlands unconformably overlain by weakly deformed lower Paleozoic sedimentary rocks of the Champlain Valley. The Mesoproterozoic rocks occur on the eastern edge of the Adirondack Highlands and represent an extension of the Grenville Province of Laurentia. Granulite facies Mesoproterozoic paragneiss, marble, and amphibolite hosted the emplacement of an anorthosite-mangerite-charnockite-granite (AMCG) suite, now exposed mostly as orthogneiss, at approximately 1.18–1.15 giga-annum (Ga, billion years before present). The earliest of four phases of deformation (D1) predated AMCG magmatism and is characterized by gneissosity, rarely preserved F1 isoclinal folds, and migmatite in the paragneiss host rocks. A sample of hornblende quartz syenite from the AMCG suite, collected from an abandoned railroad cut on Old Furnace Road, yielded a U-Pb zircon age of 1,149±10 million years before present. D2 deformation produced a composite penetrative gneissosity, migmatite, and isoclinal F2 folds. Towards the end of D2, felsic magmatism (including the regionally extensive Lyon Mountain Granite Gneiss, abbreviated “LMG”) spread by penetrative migration as semiconcordant alkali feldspar granite sheets subparallel to S2 into the previously deformed lithologies. The LMG crystallized at approximately 1.15 to 1.14 Ga and displays synkinematic F2 folds thus constraining the time of D2 deformation. Exhumation of the Marcy anorthosite began during D3 along a mylonitic extensional detachment, as a type of core complex. Protracted D3 produced F3 folds exhibited in regional domes and basins, such as the Hammondville antiform, reactivation of the S2 foliation, partial melting, metamorphism, metasomatism, iron ore remobilization, and intrusion of magnetite-bearing pegmatite both as layer-parallel sills and crosscutting dikes. D4 created NE- and NW-trending boudinage, local high-grade ductile shear zones, and crosscutting granitic pegmatite dikes. Kilometer (km)-scale lineaments readily observed in lidar data are Ediacaran mafic dikes and Phanerozoic brittle faults. Lower Paleozoic rocks are part of the Early Cambrian to Late Ordovician great American carbonate bank on the ancient margin of Laurentia. The Potsdam Sandstone preserves the Cambrian stratigraphy in outliers above the Great Unconformity. The Paleozoic rocks are weakly folded and block faulted. Parts of the quadrangle are covered by undifferentiated glacial deposits, but much of the quadrangle contains only a variably thick, veneer of unmapped glacial till over significant areas of exposed bedrock. The map also shows waste rock piles and locations of historical mining operations. This study was undertaken to improve our understanding of the bedrock geology in the Adirondack Highlands, establish a modern framework for 1:24,000-scale bedrock geologic mapping in the Adirondack Mountains, and provide a modern context for historical mines. This Scientific Investigations Map of the Eagle Lake 7.5-minute quadrangle consists of a map sheet, an explanatory pamphlet, and a geographic information system database that includes bedrock geologic units, faults, outcrops, and structural geologic information. The map sheet includes a bedrock geologic map, a correlation of map units, a description of map units, an explanation of map symbols, and two cross sections. The explanatory pamphlet includes a discussion of the geology.

New York↗
USGS2024

Status of water-level altitudes and long-term and short-term water-level changes in the Chicot and Evangeline (undifferentiated) and Jasper aquifers, greater Houston area, Texas, 2023

Since the early 1900s, groundwater withdrawn from the primary aquifers that compose the Gulf Coast aquifer system—the Chicot, Evangeline, and Jasper aquifers—has been an important source of water in the greater Houston area, Texas. This report, prepared by the U.S. Geological Survey in cooperation with the Harris-Galveston Subsidence District, City of Houston, Fort Bend Subsidence District, Lone Star Groundwater Conservation District, and Brazoria County Groundwater Conservation District, is one in an annual series of reports depicting the status of water-level altitudes and water-level changes in these aquifers in the greater Houston area. In this report, the Chicot and Evangeline aquifers are treated as a single aquifer for the purposes of providing annual assessments of regional-scale water-level altitudes and water-level changes over time. In 2023, shaded depictions of water-level altitudes for the Chicot and Evangeline aquifers (undifferentiated) ranged from about 286 feet (ft) below the North American Vertical Datum of 1988 (NAVD 88) to about 169 ft above NAVD 88. The largest decline in water-level altitudes indicated by the 1977–2023 long-term water-level-change map was in south-central Montgomery County southeast of The Woodlands. In comparison, the 1990–2023 long-term water-level-change map depicts the largest declines in water-level altitudes in localized areas at or near certain wells in parts of northwestern Harris County and south-central Montgomery County. The largest rise in water-level altitudes for 1977–2023 is depicted in a relatively large area in southeastern Harris County, whereas the largest rise in water-level altitudes for 1990–2023 is depicted in a relatively large area in central Harris County. The 5-year short-term water-level-change map depicts the largest declines at three wells in northern Fort Bend County, one well in western Harris County, and three wells in south-central Montgomery County and the largest rise at one well in central Harris County. The 1-year short-term water-level-change map depicts the largest declines at one well in northern Fort Bend County and two wells in southwestern Harris County and the largest rises at one well in northern Brazoria County and one well in south-central Montgomery County. In 2023, shaded depictions of water-level altitudes for the Jasper aquifer ranged from about 242 ft below NAVD 88 to about 218 ft above NAVD 88. The 2000–23 long-term water-level-change map depicts water-level declines throughout the study area where water-level-measurement data from the aquifer were collected, with the largest declines in north-central Harris County and south-central Montgomery County south of The Woodlands. The 5-year short-term water-level-change map depicts the largest declines at two wells in central Montgomery County near Conroe and two wells in south-central Montgomery County southeast of The Woodlands and the largest rise at one well in western Montgomery County. The 1-year short-term water-level-change map depicts the largest declines at four wells in south-central Montgomery County southeast of The Woodlands and one well in central Montgomery County near Conroe and the largest rises at two wells in western Montgomery County.

Texas↗
USGS2000

Water-quality conditions and relation to drainage-basin characteristics in the Scituate Reservoir Basin, Rhode Island, 1982-95

The Scituate Reservoir Basin covers about 94 square miles in north central Rhode Island and supplies more than 60 percent of the State of Rhode Island's drinking water. The basin includes the Scituate Reservoir Basin and six smaller tributary reservoirs with a combined capacity of about 40 billion gallons. Most of the basin is forested and undeveloped. However, because of its proximity to the Providence, Rhode Island, metropolitan area, the basin is subject to increasing development pressure and there is concern that this may lead to the degradation of the water supply. Selected water-quality constituent concentrations, loads, and trends in the Scituate Reservoir Basin, Rhode Island, were investigated locate parts of the basin likely responsible for exporting disproportionately large amounts of water-quality constituents to streams, rivers, and tributary reservoirs, and to determine whether water quality in the basin has been changing with time. Water-quality data collected between 1982 and 1995 by the Providence Water Supply Board PWSB) in 34 subbasins of the Scituate Reservoir Basin were analyzed. Subbasin loads and yields of total coliform bacteria, chloride, nitrate, iron, and manganese, estimated from constituent concentrations and estimated mean daily discharge records for the 1995 water year, were used to determine which subbasins contributed disproportionately large amounts of these constituents. Measurements of pH, color, turbidity, and concentrations of total coliform bacteria, sodium, alkalinity, chloride, nitrate, orthophosphate, iron, and manganese made between 1982 and 1995 by the PWSB were evaluated for trends. To determine the potential effects of human-induced changes in drainage- basin characteristics on water quality in the basin, relations between drainage-basin characteristics and concentrations of selected water-quality constituents also were investigated. Median values for pH, turbidity, total coliform bacteria, sodium, alkalinity, chloride, nitrate, and iron were largest in subbasins with predominately residential land use. Median instantaneous loads reflected drainage-basin size. However, loads normalized by drainage area (median instantaneous yields) also were largest in residential areas where point and non-point sources are likely, and in areas of poorly drained soils. Significant trends in water-quality constituents from 1982 to 1995 in the Scituate Reservoir Basin indicate that the quality of the water resources in the basin may be slowly changing. Scituate Reservoir subbasins with large amounts of residential land use showed increasing trends in alkalinity and chloride. In contrast, subbasins distributed throughout the drainage basin showed increasing trends in pH, color, nitrate, and iron concentrations, indicating that these characteristics and constituents may be affected more by atmospheric deposition. Although changing, water-quality constituent concentrations in the Scituate Reservoir Basin only occasionally exceeded Rhode Island and USEPA water-quality guidelines and standards. Result of correlation analysis between pH, color, turbidity, and concentrations total coliform bacteria, sodium, alkalinity, chloride, nitrate, orthophosphate, iron, and manganese and land use, geology, wetlands, slope, soil drainability, and roads indicated that the percentage of wetlands, roads, and slope appear have the greatest effect on water-quality in the Scituate Reservoir Basin. The percentage of urban, residential, and commercial land use also are important, but to a lesser degree than wetlands, roads, and slope. Finally, geology appears to have the least effect on water quality compared to other drainage-basin characteristics investigated.

Rhode Island↗
USGS2025

Multidecadal change in pesticide concentrations relative to human health benchmarks in the Nation’s groundwater

Groundwater-quality trend assessments identify aquifers that are responding to changes in pesticide use and the compounds that may pose a threat to water availability. The U.S. Geological Survey has been monitoring pesticide concentrations in groundwater for 25 principal aquifers across the conterminous United States since 1993. The groundwater well locations represent a range of soils, climate, and landforms. The wells are used to monitor groundwater underlying selected agricultural and urban settings and groundwater used for domestic supply. This study examined changes in relative concentrations, defined here as the percentage of wells with pesticide concentrations exceeding a human health benchmark (HHB). HHBs used in this report are legally enforceable drinking-water standards and nonenforceable drinking water levels. Relative pesticide concentration increases may lead to decreased water availability, as restrictions may be put in place for groundwater used as a drinking-water source. This study focused on concentration changes in 22 pesticides that were included in laboratory analysis from 1993 to 2023. The analysis and interpretation of these pesticide concentrations in groundwater have been separated into approximate decadal intervals (decade 1 (1993–2001), decade 2 (2002–12), and decade 3 (2013–22). For one pesticide, 1,2-dibromo-3-chloropropane (DBCP), concentration data were also collected in decade 4 (2023–onward). Atrazine, deethylatrazine, alachlor, prometon, and simazine were 5 pesticides detected at moderate concentrations (greater than 10 percent of the HHB but less than or equal to the HHB). The percentage of wells that had groundwater pesticide concentrations in the moderate concentration category decreased from 7 percent in decade 1 to 2 percent in decade 3. The agricultural networks had the highest percentages of wells with moderate concentrations, and these percentages decreased from 13 percent in decade 1 to 4 percent in decade 3. Moderate concentrations in the urban networks decreased between decades 1 and 2 from 4 percent to 0 percent. No moderate concentrations occurred in the urban networks in decade 3. The percentage of wells with moderate concentrations in the domestic supply networks (1 percent) was the lowest of all the network types and did not change across the three decades. Moderate atrazine or deethylatrazine concentrations occurred across all three decades in aggregated ecoregions representing similar soils, climate, and landforms in the Semiarid West, Midcontinent, and Northeastern United States. Moderate concentrations of prometon, alachlor, and simazine also occurred in the Midcontinent, Arid West, Northeast, South Atlantic Gulf, and Semiarid West regions, but the moderate concentrations did not persist across all three decades. DBCP was the only pesticide that exceeded its respective HHB, and the exceedances occurred across all four decades. In this report, the DBCP analysis was limited to one well network in the Central Valley, California. Agricultural use of DBCP was suspended in 1977. Forty-five years after being banned, DBCP concentrations were greater than the maximum contaminant level of 2 micrograms per liter (μg/L), but the number of exceedances decreased from 50 percent to 15 percent of the samples between 1993 and 2023. This assessment of decadal groundwater pesticide concentrations provides a characterization of changes in water availability because of pesticide contamination in areas where groundwater is used as a drinking-water source. The results highlight the importance of continued long-term monitoring and assessment of groundwater pesticides to identify locations and specific compounds that may pose a potential risk to human health.

continental United States↗
USGS2026

Arsenic and isotope concentrations in the lower Platte River valley of eastern Nebraska, early 1970s to 2023

The City of Lincoln, Nebraska, has been monitoring concentrations of arsenic in their source water and evaluating their options for treatment and removal since at least 2002. In 2022, the City of Lincoln, Nebr., with funding assistance from the Nebraska Water Sustainability Fund, began cooperating with the U.S. Geological Survey to examine arsenic concentrations in surface water and groundwater in the lower Platte River valley and the area around City of Lincoln Water System (LWS) well field. Arsenic data collected from the Platte River since 1974 were examined using the “weighted regression on time, discharge, and season” model, which compared the streamflow (also referred to as “discharge”), time of year, and season to estimate concentrations of arsenic. Annual mean arsenic concentrations modeled for more than 49 years at the Platte River at Louisville, Nebr., U.S. Geological Survey streamgage (station 06805500), indicated a significant increasing trend. Arsenic concentrations in the Platte River were seasonal, with the highest concentrations being observed during mid- to late summer. When seasonal patterns and streamflow were combined with arsenic concentrations in the Platte River during low streamflow conditions, groundwater contributions, which can have higher arsenic concentrations, make up a larger portion of the streamflow. Arsenic samples were collected from upstream rivers in 2022 and 2023 and were paired to analyze the arsenic contributions at the U.S. Geological Survey streamgage on the Platte River near Ashland, Nebr. (station 06801000), near the City of Lincoln well field. The arsenic concentrations from the streamgage on the Platte River near Ashland, Nebr., location, were higher than the U.S. Geological Survey streamgage on the Elkhorn River at Waterloo, Nebr. (station 06800500), and significantly lower than at the U.S. Geological Survey streamgage on the Platte River near Leshara, Nebr.(station 06796500), indicating that the Platte River usually contributes a higher concentration of arsenic than does the Elkhorn River as they join near Ashland, Nebr. During 1991–2023, six groundwater monitoring wells were analyzed to identify trends in arsenic concentrations. Two of the six wells had a positive trend during the 33-year period. One monitoring well did not reveal a long-term trend during this period but showed a trend during 2019–23, correlating to a period when the island in the middle of the Platte River was connected to the east bank of the river when manganese reducing conditions were present and groundwater levels were declining in the well. Across all wells the oxidation and reduction (redox) condition during the time of sampling was assessed. Mixed anoxic and (or) oxic redox condition was the most common redox process and the highest sampled arsenic concentrations in monitoring wells were observed in anoxic conditions driven by manganese reduction. Groundwater arsenic concentrations had seasonal variation around the City of Lincoln well field, with higher arsenic concentrations tending to be further south in comparison to samples collected further north. Isotope samples were collected and analyzed in surface water and groundwater around the LWS well field. The samples indicate that the proportion of surface water present in the LWS production wells can be higher in the spring and lower in the summer. With higher arsenic concentrations observed in the stream water during the summer period, the LWS source water can be affected by these elevated arsenic concentrations even though the proportion of surface water is lower.

Nebraska↗
USGS2024

Hydrogeologic conceptual model of groundwater occurrence and brine discharge to the Dolores River in the Paradox Valley, Montrose County, Colorado

Salinity, or total dissolved solids (TDS), of the Colorado River is a major concern in the southwestern United States where the river provides water to about 40 million people for municipal and industrial use and is used to irrigate about 5.5 million acres of land. Much of the salinity in the Colorado River Basin is derived from natural interactions of surface water and groundwater with various geologic materials (rocks, soils, and alluvial deposits). The Dolores River in southwest Colorado is a major tributary of the Colorado River that historically accounts for about 6 percent of the salinity load to the Upper Colorado River Basin with the Paradox Valley being the primary source of salinity to the Dolores River. The Paradox Valley, one of several salt-anticline valleys in the region, is a fault-bounded topographic basin aligned with and exposing an underlying salt-anticline core. Salt deposits in the Pennsylvanian Paradox Formation of the Hermosa Group form an elongated salt diapir oriented northwest to southeast that is up to 12,000 feet (ft) thick beneath the present valley floor. Surface erosion, groundwater circulation, and weathering during Tertiary and Quaternary valley formation contributed to development of a cap rock, collapse features, breccia, and brine at the top of the exposed salt diapir. Today (2023), brine occurring in the brecciated cap rock and underlying salt deposits is in hydraulic connection with an overlying freshwater alluvial aquifer, and depending on seasonal river stage and hydrologic conditions, the brine discharges to the Dolores River causing the observed increase in salinity as the river crosses the Paradox Valley. To reduce salinity concentrations in the Dolores River, the Bureau of Reclamation (Reclamation) operates the Paradox Valley Unit (PVU). The PVU project consists of nine shallow brine pumping wells near the Dolores River and one deep disposal well where the brine is injected for disposal. When operational, the PVU pumping wells extract brine from the base of the alluvial aquifer that is piped and injected into a deep disposal well about 3 miles southwest of the PVU. The PVU became fully operational July 1, 1996, and by 2015, operation of the PVU had reduced salinity concentrations in the Dolores River by as much as 70 percent compared to pre-PVU conditions. In response to a 4.5 magnitude earthquake, injection operations, and thus PVU pumping, were ceased from March 2019 to June 2022. A trial period of PVU operation began in June 2022 with a reduced injection rate, and thus PVU pumping rate, of about two-thirds capacity to gather additional information and guide future operational decisions. In cooperation with Reclamation, the U.S. Geological Survey (USGS) developed this report to present the current (2023) understanding of groundwater and brine occurrence and discharge to the Dolores River in the Paradox Valley. Results from the compilation of spatial datasets, groundwater sampling and age dating, and aquifer tests are presented to provide improved understanding of the Paradox Valley hydrogeology, to supply datasets for a numerical groundwater-flow and brine-transport model, and to support future operations of the PVU. The hydrogeologic data provided herein, along with the most recent loading analysis for the Dolores River in the Paradox Valley, and a previous conceptual model for brine discharge to the river are used to present a conceptual understanding of groundwater occurrence in the Paradox Valley.

Colorado↗
USGS1999

Streamflow, base flow, and ground-water recharge in the Housatonic River basin, western Massachusetts and parts of eastern New York and northwestern Connecticut

Streamflows for selected flow durations from 1 to 99 percent and the August median streamflows were estimated for 11 long-term streamflow-gaging stations in and near the study area. Estimates of streamflow and associated standard errors were determined for selected flow durations from 50 to 99 percent and the August median streamflows for 21 low-flow partial-record stations and for selected flow durations from 1 to 99 percent and the August median streamflows for two partial-record stations and seven short-term discontinued streamflow-gaging stations. Median streamflows per square mile for the 10-, 50-, and 90-percent flow durations and the August median streamflows were 3.90, 1.01, 0.185, and 0.248 cubic feet per second per square mile. Streamflows per square mile at selected flow-duration discharges between 1 and 99 percent at the 41 stations were related to basin characteristics to explain differences in streamflow characteristics. Basin characteristics included basin elevations, extent of stratified-drift deposits, land use, aspect, and underlying bedrock geology types. Most streamflow differences were positively correlated to basin elevation differences, most likely because precipitation increases with elevation, and to stratified-drift deposits, which allow more precipitation to recharge the ground water and to discharge later than do till and bedrock deposits. Mean base flow was computed from continuous records of daily mean discharge at 11 long-term streamflow-gaging stations in and near the study area. Mean annual base flow ranged from 13.4 to 24.5 inches per year. Minimum annual base flow ranged from 45 to 72 percent of mean annual rates at the 11 long-term stations, and the ratio of base flow to streamflow (base-flow index) ranged from 0.55 to 0.80. Base-flow durations between 1 and 99 percent were calculated from streamflow records at the 11 long-term streamflow-gaging stations. Base flow accounted for 45.5 to 85.0 percent of total annual streamflow at the 1- and 99-percent flow durations. Ground-water-recharge rates were computed from continuous records of daily mean discharge at 11 long-term streamflow-gaging stations in and near the study area. Mean annual ground-water-recharge rates ranged from 17.5 to 22.4 inches per year at 10 of the 11 long-term stations. Mean annual ground-water-recharge rates ranged from 2 to 7 inches per year higher than base flow. Minimum annual ground-water-recharge rates ranged from 48 to 72 percent of mean annual ground-water-recharge rates. Mean annual potential ground-water recharge was estimated from monthly climatological data collected at six climatological stations in and near the study area. Mean potential ground-water recharge ranged from about 17.9 to 28.9 inches per year, with a median value of 22.6 inches per year. This median value compares well to that calculated by use of streamflow records at the 11 streamflow-gaging stations (20.0 inches per year). Streamflows per square mile for the 10-, 50-, and 90-percent flow durations at stations in and near the study area were similar to those computed for other unregulated long-term continuous streamflow-gaging stations in central and eastern Massachusetts. Base-flow and ground-water-recharge rates in the study area compared closely to results from other studies in southeastern Massachusetts and Rhode Island, which were based on the same computational methods.

Connecticut, Massachusetts, New York↗
USGS2024

Geologic map and structure sections along the southern part of the Bartlett Springs Fault Zone and adjacent areas from Cache Creek to Lake Berryessa, northern Coast Ranges, California

Introduction Located in the Coast Ranges of northern California, the Bartlett Springs Fault Zone is the easternmost fault in the San Andreas Fault system in northern California. The fault is a right-lateral, strike-slip structure considered capable of producing an earthquake of moment magnitude 7. The purpose of this mapping is to better characterize the geology and earthquake hazards associated with the southern part of the Bartlett Springs Fault Zone and to help identify any evidence of active uplift on the faults bounding the Coast Ranges. Although the area immediately surrounding the Bartlett Springs Fault Zone is sparsely populated, its southern segment presents a potential seismic hazard to northern California communities as far away as the San Francisco Bay region and Sacramento. There are also nearby water resources, mineral resources, and public lands used for public recreation. The Coast Ranges of northern California are a series of northwest-southeast-oriented mountain ranges and valleys located north of the San Francisco Bay region, between the Pacific Ocean to the west and the Sacramento Valley to the east. The region has rugged terrain, high mountain peaks that reach more than 2,400 meters above sea level, isolated and narrow valley bottoms on which most human settlements are located, and large drainage systems that tend to follow the northwest-southeast-oriented topographic grain. The physiographic character of the region is shaped by its bedrock geology, deformational history, and active faulting. The basement rocks of the northern Coast Ranges consist of the Franciscan Complex and the Great Valley complex, the latter of which consists of two informal units, the Coast Range ophiolite and the Great Valley sequence. The Franciscan Complex and the Great Valley complex are in structural contact along the Coast Range Fault, a regional-scale structure and fundamental crustal boundary. The Franciscan Complex and the Great Valley complex are superposed by active, northwest-southeast-striking strike-slip faults that are associated with seismicity swarms. These active strike-slip faults can produce moderate to large earthquakes that have moment magnitudes of 7–8. In places, these active structures bound large ranges and valleys, suggesting that much of the modern topographic expression is the result of active deformation processes. This report contains new 1:24,000-scale geologic mapping along the southern part of the Bartlett Springs Fault Zone between Clear Lake and Lake Berryessa. The map area spans 738 square kilometers in northern Napa County, southern Lake County, and parts of Yolo and Colusa Counties. The south and east borders of the map are 90 kilometers north of San Francisco and 70 kilometers west of Sacramento, respectively. The map area is within the Knoxville mining district, which has a history of mercury and gold mining dating back to the mid-19th century. The two main towns in the region, Lower Lake and Clearlake, California, are west-northwest of the map area. Approximately 71,000 people live in the cities and rural communities located within a 40-kilometer radius of the center of the map area. The bedrock geology, cross sections, and structural data presented herein are critical for evaluating the long-term evolution of the Bartlett Springs Fault Zone. This work will supplement studies on local seismic hazards, liquefaction potential, landslide hazards, earthquake geology, natural resources, groundwater resources, engineering geology, and tectonic history by providing the background information for site-specific investigations on these subjects.

California↗
USGS2026

Preliminary bedrock geologic map of the Port Henry quadrangle, Essex County, New York, and Addison County, Vermont

Introduction The bedrock geology of the 7.5-minute Port Henry quadrangle consists of deformed and metamorphosed Mesoproterozoic gneisses of the Adirondack Highlands unconformably overlain by weakly deformed lower Paleozoic sedimentary rocks of the Champlain Valley. The Mesoproterozoic rocks occur on the eastern edge of the Adirondack Highlands and represent an extension of the Grenville Province of Laurentia. Mesoproterozoic paragneiss, marble, and amphibolite hosted the emplacement of an anorthosite-mangerite-charnockite-granite (AMCG) suite, now exposed mostly as orthogneiss, at approximately 1.18–1.15 Ga (giga-annum). In the Port Henry quadrangle, the AMCG metaigneous rocks (Yhg, Ygb, Yanw) intruded older, mostly metasedimentary rocks of the Grenville Complex during the middle to late Shawinigan orogeny (~1,160–1,150 Ma [mega-annum]). All rocks were subsequently metamorphosed to upper amphibolite to granulite facies conditions during the 1,080–1,050 Ma Ottawan orogeny. New mapping reveals four periods of deformation: (1) D1 produced rarely preserved isoclinal folds in the paragneiss and marble and predates AMCG magmatism. (2) Subsequent D2 deformation produced the dominant gneissic fabric preserved in the rock, recumbent folding, and deformed all the Proterozoic units in the map area. Syn- to late-D2 felsic magmatism resulted in the regionally extensive Lyon Mountain Granite Gneiss, which hosts numerous magnetite ore bodies. (3) Mylonitic extensional shear zones and core complex formation marked the beginning of D3 deformation. Protracted D3 deformation resulted in F3 upright folding, dome and basin formation, pegmatite intrusion, reactivation of the S2 foliation, partial melting, metamorphism, metasomatism, iron-ore remobilization, and intrusion of magnetite-bearing pegmatite both as layer-parallel sills and crosscutting dikes. (4) D4 created northeast- and northwest-trending local high-grade ductile shear zones and boudinage, northwest-trending regional kilometer (km)-wide ductile shear zones, and crosscutting granitic pegmatite dikes. The development of the late-stage regional shear zones (D4) was likely due to the continuation of extensional doming and uplift from upper amphibolite facies conditions at the end of the Ottawan orogeny. The majority of iron-ore deposits in the Port Henry and adjacent Witherbee quadrangles are in the hanging wall of these extensional shear zones. In the Port Henry quadrangle, the km-wide Cheney Mountain shear zone is the result of D4 deformation. Kilometer-scale lineaments readily observed in lidar data are Ediacaran mafic dikes and Phanerozoic brittle faults. The Paleozoic rocks are part of the Early Cambrian to Late Ordovician carbonate bank on the ancient margin of Laurentia. The approximately 1-km-thick Cambrian to Ordovician stratigraphy records a transition from synrift clastics to passive-margin peritidal carbonate buildups to gradually deeper-water subtidal- to shelf-carbonates during foreland basin development associated with the Taconic orogeny. The Paleozoic rocks are weakly folded and block faulted. Large areas of the Champlain Valley are covered by undifferentiated glacial deposits, some of which contain mapped landslides. The map also shows waste rock piles and tailings from historical mining operations. This study was undertaken to improve our understanding of the bedrock geology in the Adirondack Highlands, establish a modern framework for 1:24,000-scale bedrock geologic mapping in the Adirondacks, provide a context for historical iron mines in the eastern Adirondacks, and update the stratigraphy of the Champlain Valley in New York and Vermont. This Open-File Report includes a bedrock geologic map; a description of map units; a correlation of map units; and a geographic information system database that includes bedrock geologic units, faults, outcrops, and structural geologic information.

New York, Vermont↗
USGS2024

Hydrogeologic framework and extent of saltwater intrusion in Kings, Queens, and Nassau Counties, Long Island, New York

In 2016, the U.S. Geological Survey began a multiyear cooperative study with the New York State Department of Environmental Conservation to evaluate the sustainability of Long Island’s sole-source aquifer system through hydrogeologic mapping, compilation of groundwater chloride concentrations, and groundwater flow modeling. In the initial phase of the islandwide study, the hydrogeologic framework and extent of saltwater intrusion in aquifers in Kings, Queens, and Nassau Counties on western Long Island, N.Y., were investigated. The aquifer system underlying western Long Island has been under stress from pumping of public, irrigation (golf course), and industrial supply wells. Saltwater intrusion has occurred from surrounding embayments (East River, Long Island Sound, Jamaica Bay, and the Atlantic Ocean) due to pumping. Eighteen boreholes were drilled and cores taken during 2019–21 to collect hydrogeologic, geochemical, and geophysical data to delineate the complex subsurface hydrogeology and extent of saltwater intrusion within the study area. Evaluation of the new cores, reexamination of legacy core descriptions, and analysis of borehole geophysical logs was used to refine the previously published hydrogeologic framework of Pleistocene and Cretaceous unconsolidated sediments in the area, including delineation of a previously undefined hydrogeologic unit between the Magothy aquifer and the Raritan confining unit, herein named the “upper Raritan aquifer.” The upper Raritan aquifer was first recognized in southeastern Nassau County from an analysis of about 50 closely spaced boreholes with high-resolution core descriptions and gamma-ray (gamma) logs. Further analysis of borehole logs across the study area indicated that the upper Raritan aquifer was also present in Kings and Queens Counties. Nuclear magnetic resonance (NMR) logging was used for the first time on Long Island to provide estimates of the hydraulic properties of the major aquifer and confining units. Unlike other geophysical logs that record responses to the rock matrix and fluid properties and are strongly dependent on mineralogy, NMR logs record responses to the presence of hydrogen protons in the formation fluid to determine water fraction and pore-size distribution. NMR log analysis provided estimates of the clay-bound, capillary-bound, and mobile water fractions and hydraulic conductivity of aquifers and confining units penetrated by five wells in Nassau County. Pumpage for public-supply and industrial wells on Long Island began in the 1870s with small, localized suppliers of populated areas in Kings and Queens Counties. By 1904–16, pumpage for public water supply in Kings County averaged 21 million gallons per day, and averaged 37 million gallons per day in Queens County, mostly from the upper glacial aquifer. Saltwater intrusion was reported as early as the beginning of the 20th century and included the upper glacial-Jameco-Magothy and Lloyd-North Shore aquifer systems. By 1936, pumping in central Kings County created a major cone of depression in the water table extending to the south shore of much of Kings County and into southwestern Queens County. Saltwater intrusion has caused the shutdown of public-supply wells in Kings, Queens, and Nassau Counties. A large saltwater intrusion wedge in the Lloyd aquifer was indicated in southern Queens County in the early part of the 20th century, and the saltwater interface may have been onshore predevelopment. Most of Kings and Queens Counties are intruded with saltwater in both the upper glacial-Jameco-Magothy and Lloyd-North Shore aquifers systems. Saltwater increased during the 20th century and continues to increase to the present (2023) in the Lloyd-North Shore aquifer system in Great Neck and Manhasset Neck in northern Nassau County. A major wedge of saltwater intrusion in the upper glacial-Jameco-Magothy aquifer in southwestern Nassau County appears to be increasing.

New York↗