Geology Reports⌕ Search

SEARCH · Geology Reports

Results for “Quaternary”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 901 records · Page 50Linked to original sources
USGS2014

Surficial geologic map of the Charleston region, Berkeley, Charleston, Colleton, Dorchester, and Georgetown Counties, South Carolina

This map portrays the surface and shallow subsurface geology of the greater Charleston, S.C. region east of 80°30′ west and south of 33°15′ north. The region covers the entirety of Charleston County and portions of Berkeley, Colleton, Dorchester, and Georgetown Counties. Units locally exposed at the surface range in age from middle Eocene to Holocene, but most of the area is covered by Quaternary interglacial deposits. These are, from oldest to youngest, the Okefenokee, Waccamaw(?), Penholoway, Ladson, Ten Mile Hill, and Wando Formations and the Silver Bluff beds. Two cross sections, one running southeast from Harleyville to the coastline on James Island and the other running along the coastal barrier islands from the town of Edisto Beach to the northeast end of Bull Island at the southwest edge of Bull Bay, portray the complex geometry of the Paleogene and Neogene marine units that directly lie beneath the Quaternary units. These older units include the Santee Limestone, Tupelo Bay, Parkers Ferry, Ashley, Chandler Bridge, Edisto, Parachucla, and Marks Head Formations, the Goose Creek Limestone, and the Raysor Formation. The estimated locations of deeply buried active basement faults are shown which are responsible for ongoing modern seismicity in the Charleston, S.C. area.

South Carolina↗
USGS2014

Magnetic and gravity studies of Mono Lake, east-central, California

From August 26 to September 5, 2011, the U.S. Geological Survey (USGS) collected more than 600 line-kilometers of shipborne magnetic data on Mono Lake, 20 line-kilometers of ground magnetic data on Paoha Island, 50 gravity stations on Paoha and Negit Islands, and 28 rock samples on Paoha and Negit Islands, in east-central California. Magnetic and gravity investigations were undertaken in Mono Lake to study regional crustal structures and to aid in understanding the geologic framework, in particular regarding potential geothermal resources and volcanic hazards throughout Mono Basin. Furthermore, shipborne magnetic data illuminate local structures in the upper crust beneath Mono Lake where geologic exposure is absent. Magnetic and gravity methods, which sense contrasting physical properties of the subsurface, are ideal for studying Mono Lake. Exposed rock units surrounding Mono Lake consist mainly of Quaternary alluvium, lacustrine sediment, aeolian deposits, basalt, and Paleozoic granitic and metasedimentary rocks (Bailey, 1989). At Black Point, on the northwest shore of Mono Lake, there is a mafic cinder cone that was produced by a subaqueous eruption around 13.3 ka. Within Mono Lake there are several small dacite cinder cones and flows, forming Negit Island and part of Paoha Island, which also host deposits of Quaternary lacustrine sediments. The typical density and magnetic properties of young volcanic rocks contrast with those of the lacustrine sediment, enabling us to map their subsurface extent.

California↗
USGS2015

California State Waters Map Series — Offshore of Pacifica, California

In 2007, the California Ocean Protection Council initiated the California Seafloor Mapping Program (CSMP), designed to create a comprehensive seafloor map of high-resolution bathymetry, marine benthic habitats, and geology within the 3-nautical-mile limit of California’s State Waters. The CSMP approach is to create highly detailed seafloor maps through collection, integration, interpretation, and visualization of swath sonar data, acoustic backscatter, seafloor video, seafloor photography, high-resolution seismic-reflection profiles, and bottom-sediment sampling data. The map products display seafloor morphology and character, identify potential marine benthic habitats, and illustrate both the surficial seafloor geology and shallow (to about 100 m) subsurface geology. The Offshore of Pacifica map area is located in northern California, on the Pacific coast of the San Francisco Peninsula about 10 kilometers south of the Golden Gate. The map area extends from Daly City, through Pacifica, to the small coastal community of Montara. Much of the coastal zone is managed by either the State of California or local governments, including Thornton Beach State Park, Mussel Rock Park, Pacifica State Beach, Gray Whale Cove State Beach, and Montara State Beach. The major structure in the transform boundary between the Pacific and North American tectonic plates, the northwest-striking San Andreas Fault, cuts through the map area, crossing the shoreline near Mussel Rock before continuing offshore. The epicenter of the great 1906 California earthquake is located on the offshore part of the San Andreas Fault Zone a few kilometers north of the map area. The map area is located at the northwest end of the Santa Cruz Mountains, much of which has been uplifted in the last 400,000 years. Southwest of the San Andreas Fault Zone, this uplift has resulted in a highly variable coastal morphology characterized by long, narrow beaches bounded by steep cliffs or marine terraces, small pocket beaches surrounded by rocky promontories, and steep, narrow coastal watersheds. Geologic units mapped along the coast include sedimentary, volcanic, and metamorphic rocks of the Franciscan Complex; Cretaceous granitic rocks; Tertiary sedimentary rocks; and Quaternary coastal marine terraces, deep-seated and shallow landslides, and beach and sand dune deposits, all of which contribute sediment to the coastal zone. In contrast to the more rural coastal zone to the south, the highly urbanized coastal zone north of Mussel Rock and the San Andreas Fault Zone is characterized by a narrow beach bounded by steep, 50- to 120-m-high cliffs made up of sand, silt, and clay of the Pliocene and Pleistocene Merced Formation, the source of numerous landslides. Two large landslides along “Northridge bluff” in 2003 and 2007 had estimated volumes of 305,800 to 382,300 m 3 and 120,800 m 3 , respectively. Coastal landslides also are an issue to the south between Mussel Rock and Mori Point, even as bluffs diminish in height and pocket beaches transition to a more continuous strand bounded by Quaternary-age dunes and low-lying marine terraces. Mori Point, a coastal promontory in Pacifica underlain by rocks of the Franciscan Complex, rises abruptly to a height of 90 m from the shoreline. Pocket beaches characterize the shoreline from Mori Point south to Shelter Cove, the largest of which, Pacifica State Beach, is at the mouth of San Pedro Creek. The coastal zone south of Pacifica, which stretches from Shelter Cove to Montara and includes Point San Pedro and Devils Slide, lies at the northwest end of San Pedro Mountain (underlain largely by early Tertiary sedimentary rocks) and Montara Mountain (underlain by Cretaceous granitic rocks). Elevations at Montara Mountain exceed 500 m just 4 km from the shoreline, and steep cliffs along the coast are as high as 275 m. This rugged terrain results in numerous rocky promontories, small pocket beaches, and large coastal landslides. Slope failures along Devils Slide are notorious for closing California Highway 1, creating such a large and persistent problem that the California Department of Transportation has bypassed this coastal section by tunneling through San Pedro Mountain; the tunnel was completed and the new section of highway opened in 2013. Coastal relief diminishes at Montara in the southernmost part of the map area, where the shoreline is bounded by 10- to 20-m-high marine terraces. Throughout the year, this part of the coast is exposed to the north Pacific swell, the southern swell, northwest wind waves, and local wind waves. The north Pacific swell dominates in winter months, having wave heights that range from 2 to 10 m at offshore buoys and wave periods that range from 10 to 25 s. During summer months, the largest waves come from the southern swell, generated by storms in the south Pacific and offshore of Central America. Characteristically, these swells have smaller wave heights (0.3–3 m) but similarly long wave periods (10–25 s). Local wind waves are most common from October to April, whereas northwest wind waves affect the coast throughout the year. These two wind-wave regimes typically have wave heights of 1 to 4 m and short wave periods (3–10 s). Unlike many other parts of the California coast where sediment is supplied primarily from river and (or) stream runoff, sediment supply to the offshore along this part of northern California is a complex mixture of (1) sand transported from the coast north of the Golden Gate, (2) sediment transported to the coast through the San Francisco Bay via the Golden Gate and then dispersed over the adjacent ebb-tide delta, and (3) varying volumes of sediment eroded from adjacent steep coastal bluffs caused by wave-induced landslides and other erosional events. Additionally, since the 1980s, coastal erosion south of the Golden Gate has increased substantially between Ocean Beach (on the west coast of San Francisco, about 5 km north of the map area) and Point San Pedro. The combined sediment load is transported southward along the coast by the generally north-to-south alongshore current, which develops in response to the energetic winter-wave climate associated with the north Pacific swell. Overall, beaches in the map area have a long-term erosional trend, except near Mussel Rock where a long-term accretionary trend may reflect increased sediment supply from landslides. Beach-front riprap armoring and retaining walls are used locally to protect the shoreline from seasonal storm waves, most notably between Mussel Rock and Mori Point. The continental shelf in the map area is about 40 km wide, with water depths at the shelf break that range from about 80 to 120 m. Within California’s State Waters, the midshelf to inner shelf areas are characterized by a relatively flat, shallow (water depths of as much as 44 m) seafloor that dips gently (about 0.2° to 0.3°) westward. The seafloor is composed primarily of unconsolidated Holocene sediment (marine deposits), as well as some nearshore bedrock outcrops that consist primarily of rocks of the Tertiary Purisima Formation and also Cretaceous plutonic rocks (granite or granodiorite).

California↗
USGS2015

Geology of Joshua Tree National Park geodatabase

The database in this Open-File Report describes the geology of Joshua Tree National Park and was completed in support of the National Cooperative Geologic Mapping Program of the U.S. Geological Survey (USGS) and in cooperation with the National Park Service (NPS). The geologic observations and interpretations represented in the database are relevant to both the ongoing scientific interests of the USGS in southern California and the management requirements of NPS, specifically of Joshua Tree National Park (JOTR). Joshua Tree National Park is situated within the eastern part of California’s Transverse Ranges province and straddles the transition between the Mojave and Sonoran deserts. The geologically diverse terrain that underlies JOTR reveals a rich and varied geologic evolution, one that spans nearly two billion years of Earth history. The Park’s landscape is the current expression of this evolution, its varied landforms reflecting the differing origins of underlying rock types and their differing responses to subsequent geologic events. Crystalline basement in the Park consists of Proterozoic plutonic and metamorphic rocks intruded by a composite Mesozoic batholith of Triassic through Late Cretaceous plutons arrayed in northwest-trending lithodemic belts. The basement was exhumed during the Cenozoic and underwent differential deep weathering beneath a low-relief erosion surface, with the deepest weathering profiles forming on quartz-rich, biotite-bearing granitoid rocks. Disruption of the basement terrain by faults of the San Andreas system began ca. 20 Ma and the JOTR sinistral domain, preceded by basalt eruptions, began perhaps as early as ca. 7 Ma, but no later than 5 Ma. Uplift of the mountain blocks during this interval led to erosional stripping of the thick zones of weathered quartz-rich granitoid rocks to form etchplains dotted by bouldery tors—the iconic landscape of the Park. The stripped debris filled basins along the fault zones. Mountain ranges and basins in the Park exhibit an east-west physiographic grain controlled by left-lateral fault zones that form a sinistral domain within the broad zone of dextral shear along the transform boundary between the North American and Pacific plates. Geologic and geophysical evidence reveal that movement on the sinistral faults zones has resulted in left steps along the zones, resulting in the development of sub-basins beneath Pinto Basin and Shavers and Chuckwalla Valleys. The sinistral fault zones connect the Mojave Desert dextral faults of the Eastern California Shear Zone to the north and east with the Coachella Valley strands of the southern San Andreas Fault Zone to the west. Quaternary surficial deposits accumulated in alluvial washes and playas and lakes along the valley floors; in alluvial fans, washes, and sheet wash aprons along piedmonts flanking the mountain ranges; and in eolian dunes and sand sheets that span the transition from valley floor to piedmont slope. Sequences of Quaternary pediments are planed into piedmonts flanking valley-floor and upland basins, each pediment in turn overlain by successively younger residual and alluvial surficial deposits.

California↗
USGS2016

California State Waters Map Series — Offshore of Monterey, California

Introduction In 2007, the California Ocean Protection Council initiated the California Seafloor Mapping Program (CSMP), designed to create a comprehensive seafloor map of high-resolution bathymetry, marine benthic habitats, and geology within the 3-nautical-mile limit of California’s State Waters. The CSMP approach is to create highly detailed seafloor maps through collection, integration, interpretation, and visualization of swath bathymetry data, acoustic backscatter, seafloor video, seafloor photography, high-resolution seismic-reflection profiles, and bottom-sediment sampling data. The map products display seafloor morphology and character, identify potential marine benthic habitats, and illustrate both the surficial seafloor geology and shallow subsurface geology. The Offshore of Monterey map area in central California is located on the Pacific Coast, about 120 km south of San Francisco. Incorporated cities in the map area include Seaside, Monterey, Marina, Pacific Grove, Carmel-by-the-Sea, and Sand City. The local economy receives significant resources from tourism, as well as from the Federal Government. Tourist attractions include the Monterey Bay Aquarium, Cannery Row, Fisherman’s Wharf, and the many golf courses near Pebble Beach, and the area serves as a gateway to the spectacular scenery and outdoor activities along the Big Sur coast to the south. Federal facilities include the Army’s Defense Language Institute, the Naval Postgraduate School, and the Fleet Numerical Meteorology and Oceanography Center (operated by the Navy). In 1994, Fort Ord army base, located between Seaside and Marina, was closed; much of former army base land now makes up the Fort Ord National Monument, managed by the U.S. Bureau of Land Management as part of the National Landscape Conservation System. In addition, part of the old Fort Ord is now occupied by California State University, Monterey Bay. The offshore part of the map area lies entirely within the Monterey Bay National Marine Sanctuary, one of the nation’s largest marine sanctuaries. State beaches and parks within the map area include Fort Ord Dunes State Park and the Marina, Monterey, and Asilomar State Beaches, as well as Carmel River State Beach, which includes the Carmel River Lagoon and Wetland Natural Preserve. The map area also includes all or part of several State Marine Protected Areas, including the Carmel Pinnacles, Asilomar, and Lovers Point–Julia Platt State Marine Reserves, as well as the Carmel Bay, Pacific Grove Marine Gardens, Edward F. Ricketts, and Portuguese Ledge State Marine Conservation Areas. The coastal zone in the map area is characterized by two distinct physiographies. From Marina to Monterey, sandy beaches are backed by a belt of sand dunes, as much as 30 to 40 m high and as wide as 8 km. The Salinas River supplies the sand for the beaches and dunes. Nearshore sediment transport is primarily to the south, in the southern Monterey littoral cell. Along the Monterey peninsula, which lies at the north end of the rugged Santa Lucia Range, coastal relief is very different. The peninsula is characterized largely by low marine terraces that formed mostly on hard and relatively stable granitic bedrock. Carmel Beach in Carmel-by-the-Sea is the longest continuous beach in this area; bedrock points and small pocket beaches characterize most of the rest of the peninsula. The Carmel River littoral cell extends along the coast from Point Pinos to Point Lobos (just south of the map area), including Carmel Beach; sediment transport is primarily to the south. The granitic rocks that crop out so prominently along the Monterey peninsula make up part of the Salinian block, a crustal terrane that in this area lies west of the San Andreas Fault and east of the San Gregorio Fault. The strike-slip San Andreas Fault Zone, which lies just 26 km east of the map area, is the most important structure within the Pacific–North American transform plate boundary. The San Gregorio Fault, a secondary fault within the distributed plate boundary, cuts through (and is roughly aligned with) Carmel Canyon, a submarine canyon in the southwest corner of the map area that is part of the Monterey Canyon system. The San Gregorio Fault Zone is part of a fault system that is present predominantly in the offshore for about 400 km, from Point Conception in the south (where it is known as the Hosgri Fault) to Bolinas and Point Reyes in the north. The offshore part of the map area primarily consists of relatively flat continental shelf, bounded on the west by the steep flanks of Carmel Canyon. Shelf width varies from 2 to 3 km in the southern part of the map area, near the mouth of Carmel Canyon, to 14 km in Monterey Bay. Bedrock beneath the shelf is overlain in many areas by variable amounts (0 to 16 m) of upper Quaternary shelf and nearshore sediments deposited as sea level fluctuated in the late Pleistocene. “Soft-induration,” unconsolidated sediment is the dominant (about 63 percent) habitat type on the continental shelf, followed by “hard-induration” rock and boulders (about 34 percent) and “mixed-induration” substrate (about 3 percent). At water depths of about 100 to 130 m, the shelf break approximates the shoreline during the sea-level lowstand of the Last Glacial Maximum, about 21,000 years ago. Carmel Canyon and other parts of the Monterey Canyon system in the map area extend from the shelf break to water depths that reach 1,600 m. Most of the extensive incision of the shelf break and canyon flanks probably occurred during repeated Quaternary sea-level lowstands. The relatively straight floor of Carmel Canyon notably is aligned with the San Gregorio Fault Zone. Mixed hard-soft substrate is the most common (about 51 percent) habitat type in Carmel Canyon; hard bedrock and soft, unconsolidated sediment cover about 40 percent and 9 percent of canyon habitat, respectively. This part of the central California coast is exposed to large North Pacific swells from the northwest throughout the year. Wave heights range from 2 to 10 m, the larger swells occurring from October to May. During El Niño–Southern Oscillation (ENSO) events, winter storms track farther south than they do in normal (non-ENSO) years, thereby impacting the map area more frequently and with waves of larger heights. Benthic species observed in the map area are natives of the cold-temperate biogeographic zone that is called either the “Oregonian province” or the “northern California ecoregion.” This biogeographic province is maintained by the long-term stability of the southward-flowing California Current, the eastern limb of the North Pacific subtropical gyre that flows from southern British Columbia to Baja California. Biological productivity resulting from coastal upwelling supports populations of Sooty Shearwater, Western Gull, Common Murre, Cassin’s Auklet, and many other less populous bird species. An observable recovery of Humpback and Blue Whales has occurred in the area; both species are dependent on coastal upwelling to provide nutrients. The large extent of exposed inner shelf bedrock supports large forests of “bull kelp,” which is well adapted for high-wave-energy environments. The kelp beds are well-known habitat for the population of southern sea otters. Common fish species found in the kelp beds and rocky reefs include lingcod and various species of rockfish and greenling.

California↗
USGS2018

California State Waters Map Series — Offshore of Gaviota, California

Introduction In 2007, the California Ocean Protection Council initiated the California Seafloor Mapping Program (CSMP), designed to create a comprehensive seafloor map of high-resolution bathymetry, marine benthic habitats, and geology within the 3-nautical-mile limit of California’s State Waters. The CSMP approach is to create highly detailed seafloor maps through collection, integration, interpretation, and visualization of swath sonar data, acoustic backscatter, seafloor video, seafloor photography, high-resolution seismic-reflection profiles, and bottom-sediment sampling data. The map products display seafloor morphology and character, identify potential marine benthic habitats, and illustrate both the surficial seafloor geology and shallow subsurface geology. The map area is in the southern part of the Western Transverse Ranges geologic province, which is north of the California Continental Borderland. Significant clockwise rotation—at least 90°—since the early Miocene has been proposed for the Western Transverse Ranges province, and the region is presently undergoing north-south shortening. The offshore part of the map area lies south of the steep south flank of the Santa Ynez M ountains . The crest of the range , which has a maximum elevation of about 760 m in the map area , lies about 4 km north of the shoreline. Gaviota is an unincorporated community that has a sparse population (less than 100), and the coastal zone is largely open space that is locally used for cattle grazing. The Union Pacific railroad tracks extend westward along the coast through the entire map area, within a few hundred meters of the shoreline. Highway 101 crosses the eastern part of the map area, also along the coast, then turns north (inland) and travels through Cañada de la Gaviota and Gaviota Pass en route to Buellton. Gaviota State Park lies at the mouth of Cañada de la Gaviota. West of Gaviota, the onland coastal zone is occupied by the Hollister Ranch, a privately owned, gated community that has no public access. The map area has a long history of petroleum exploration and development. Several offshore gas fields were discovered and were developed by onshore directional drilling in the 1950s and 1960s. Three offshore petroleum platforms were installed in adjacent federal waters in 1976 (platform “Honda”) and 1989 (platforms “Heritage” and “Harmony”). Local offshore and onshore operations were serviced for more than a century by the Gaviota marine terminal, which is currently being decommissioned and will be abandoned in an intended transition to public open space. The Offshore of Gaviota map area lies within the western Santa Barbara Channel region of the Southern California Bight, and it is somewhat protected from large Pacific swells from the north and northwest by Point Conception and from south and southwest swells by offshore islands and banks. Much of the shoreline in the map area is characterized by narrow beaches that have thin sediment cover, backed by low (10- to 20-m-high) cliffs that are capped by a narrow coastal terrace. Beaches are subject to wave erosion during winter storms, followed by gradual sediment recovery or accretion in the late spring, summer, and fall months during the gentler wave climate. The map area lies in the western-central part of the Santa Barbara littoral cell, which is characterized by west-to-east transport of sediment from Point Arguello on the northwest to Hueneme and Mugu Canyons on the southeast. Sediment supply to the western and central part of the littoral cell is mainly from relatively small coastal watersheds. In the map area, sediment sources include Cañada de la Gaviota (52 km 2 ), as well as Cañada de la Llegua, Arroyo el Bulito, Cañada de Santa Anita, Cañada de Alegria, Cañada del Agua Caliente, Cañada del Barro, Cañada del Leon, Cañada San Onofre, and many others. Coastal-watershed discharge and sediment load are highly variable, characterized by brief large events during major winter storms and long periods of low (or no) flow and minimal sediment load between storms. In recent (recorded) history, the majority of high-discharge, high-sediment-flux events have been associated with El Niño phases of the El Niño–Southern Oscillation climatic pattern. Shelf width in the Offshore of Gaviota map area ranges from about 4.3 to 4.7 km, and shelf slopes average about 1.0° to 1.2° but are highly variable because of the presence of the large Gaviota sediment bar. This bar extends southwestward for about 9 km from the mouth of Cañada de la Gaviota to the shelf break, is as wide as 2 km, and is by far the largest shore-attached sediment bar in the Santa Barbara Channel. The shelf is underlain by bedrock and variable amounts (0 to as much as 36 m in the Gaviota bar) of upper Quaternary sediments deposited as sea level fluctuated in the late Pleistocene. The trend of the shelf break changes from about 276° to 236° azimuth over a distance of about 12 km, and it ranges in depth from about 91 m to as shallow as 62 to 73 m where significant shelf-break and upper-slope failure and landsliding has apparently occurred. The shelf break in the western part of the map area is notably embayed by the heads of three large (150- to 300-m-wide) channels that have been referred to as “the Gaviota Canyons” or as “Drake Canyon,” “Sacate Canyon,” and “Alegria Canyon.” Seafloor habitats in the broad Santa Barbara Channel region consist of significant amounts of soft, unconsolidated sediment interspersed with isolated areas of rocky habitat that support kelp-forest communities in the nearshore and rocky-reef communities in deeper water. The potential marine benthic habitat types mapped in the Offshore of Gaviota map area are directly related to its Quaternary geologic history, geomorphology, and active sedimentary processes. These potential habitats lie primarily within the Shelf (continental shelf) but also partly within the Flank (basin flank or continental slope) megahabitats. The fairly homogeneous seafloor of sediment and low-relief bedrock provides characteristic habitat for rockfish, groundfish, crabs, shrimp, and other marine benthic organisms. Several areas of smooth sediment form nearshore terraces that have relatively steep, smooth fronts, which may be attractive to groundfish. Below the steep shelf break, soft, unconsolidated sediment is interrupted by the heads of several submarine canyons and rills, some bedrock exposures, and small carbonate mounds associated with asphalt mounds and pockmarks, also good potential habitat for rockfish. The map area includes the relatively small (5.2 km 2 ) Kashtayit State Marine Conservation Area, which largely occupies the inner part of the Gaviota sediment bar.

California↗
USGS2019

Offshore shallow structure and sediment distribution, Point Sur to Point Arguello, central California

This publication consists of three map sheets that display shallow geologic structure, along with sediment distribution and thickness, for an about 225-km-long offshore section of the central California coast between Point Sur and Point Arguello. Each map sheet includes three maps, at scales of either 1:150,000 or 1:200,000, as well as a set of figures that contain representative high-resolution seismic-reflection profiles. The maps and seismic-reflection surveys cover most of the continental shelf in this region. In addition, the maps show the locations of the shelf break and the 3-nautical-mile limit of California’s State Waters. The seismic-reflection data, which are the primary dataset used to develop the maps, were collected to support the California Seafloor Mapping Program and U.S. Geological Survey Offshore Geologic Hazards projects. In addition to the three map sheets, this publication includes geographic information system data files of interpreted faults, folds, sediment thicknesses, and depths-to-base of sediment. The faults and folds shown on the maps have been locally simplified as appropriate for the map scales. The right-lateral San Gregorio–Hosgri Fault (SGHF) is the most significant structure in the map area. On a regional scale, the SGHF is part of a 400-km-long, right-lateral fault system that extends northwestward from Point Arguello to the area offshore of San Francisco, where it merges with the San Andreas Fault. From north to south in this part of central California, the SGHF lies offshore between the south flank of Point Sur and the north flank of Point Piedras Blancas, then comes onshore at Point Piedras Blancas, before heading offshore again between the south flank of Point Piedras Blancas and Point Arguello. Cumulative fault offset along the SGHF is as much as 150 to 160 km, decreasing to the south by transferring slip on to northwest-striking faults that converge with the SGHF both onland and offshore from the east. In the map area, the offshore-converging faults include the Los Osos Fault, the Shoreline–Point Buchon Fault, the Casmalia Fault, and the Lions Head Fault. Quaternary sediments and bedrock underlie the shelf. On the seismic-reflection profiles, we divide Quaternary shelf sediments into two units. Characterizing the younger, upper unit is a focus of this publication. This unit is inferred to have been deposited on the shelf in the last about 21,000 years during the sea-level rise that followed the last major lowstand and the Last Glacial Maximum (LGM). This upper unit overlies a transgressive surface of erosion, a commonly angular, wave-cut unconformity, and is generally characterized by low-amplitude, continuous to moderately continuous, diffuse, subparallel, generally flat reflections. Maps in this publication show both the thickness of this upper sediment unit and the depth to the base of the sediment unit. Within the map region, 11 different “domains” of post-LGM shelf sediment are delineated on the basis of sediment thickness and coastal geomorphology. Maximum sediment thickness is in the southern part of the region, offshore of the mouths of the Santa Ynez and Santa Maria Rivers. Minimum sediment thickness is found offshore of prominent rocky points, including Point Buchon and Piedras Blancas. Mean sediment thickness for the entire shelf in the map area between Point Sur and Point Arguello is 12.2 m, and total sediment volume is 24.7 million cubic meters.

California↗
USGS2022

Preliminary geologic map of the Cherry Hill quadrangle, Dinwiddie, Sussex, and Greensville Counties, Virginia

The Cherry Hill 7.5-minute quadrangle straddles the Coastal Plain and Piedmont Provinces along the Tidewater Fall Line. Rocks of the eastern Piedmont Roanoke Rapids terrane crop out in the western part of the quadrangle and consist of greenschist- to amphibolite-facies Neoproterozoic felsic to intermediate metavolcanic rocks, some of which contain flattened quartz phenocrysts and are locally isoclinally folded; greenstone that locally preserves primary layering; and intrusive metadiorite and metagabbro, much of which has been altered to amphibolite. Most of these rocks are strongly foliated and jointed. Greenschist-facies metasiltstone that preserves primary bedding also occurs locally in the Roanoke Rapids terrane. Neoproterozoic mica schist, middle Paleozoic foliated metagranite, and late Paleozoic massive and porphyritic granite crop out in the eastern part of the quadrangle and are part of the Dinwiddie terrane and the late Paleozoic De Witt pluton. Upper greenschist- to lower amphibolite-facies mica schist consists of stringers and boudins of vein quartz and contains porphyroclasts of staurolite that preserve an earlier foliation as inclusion trails. Porphyroblasts of garnet, staurolite, and kyanite also occur locally. Foliation in granites of the De Witt pluton may be magmatic. Separating the Dinwiddie terrane from the Roanoke Rapids terrane are greenschist-facies, highly strained granitic mylonite and bodies of less deformed granite within the Nottoway River fault zone, which is a strand of the eastern Piedmont fault system. Paleozoic pegmatite dikes and quartz veins cross-cut rocks of the Dinwiddie terrane, and quartz veins and Jurassic diabase dikes cross-cut rocks of the Roanoke Rapids terrane. Sand and gravel deposits of the Atlantic Coastal Plain overlie Piedmont rocks. Two units assigned to the upper part of the Neogene Chesapeake Group occur at elevations up to 295 feet (90 meters) above sea level atop the Richmond plain in the central part of the quadrangle. Two units of the Quaternary Bacons Castle Formation occupy the Essex plain and Norge uplands at elevations up to 180 feet (55 meters) above sea level in the eastern part of the quadrangle. In the western part of the quadrangle, multiple levels of terrace deposits are the fluvial equivalent of estuarine to marine units of the Atlantic Coastal Plain to the east. Holocene alluvium occurs along creeks and the Nottoway River. Quaternary colluvial deposits occur locally. Numerous Carolina bays pock the landscape of the Richmond and Essex plains, and three abandoned channelways represent former locations of Sappony Creek, one of the major drainages of the quadrangle. Brittle faults juxtapose Piedmont basement rocks against Neogene sediments of the upper part of the Chesapeake Group. These Cenozoic faults were first uncovered in mine excavations in the late 1990s; new mapping indicates that many of these faults are reactivated silicified cataclasite zones that occur throughout the Piedmont basement rocks. Silicified cataclasites and associated quartz veins are typically mineralized with iron and iron sulfide minerals. The quadrangle was the focus of extensive mining for heavy minerals, including ilmenite and zircon, in upland Atlantic Coastal Plain deposits beginning in the mid-1990s. Other mineral resources, including precious metals, clay for structural brick, crushed stone, and building stone for millstones, have also been prospected or quarried in the quadrangle.

Virginia↗
USGS2023

Preliminary surficial geologic map of Leuhman Ridge and the surrounding area, Edwards Air Force Base and Air Force Research Laboratory, Kern and San Bernardino Counties, California

This preliminary geologic map presents mapping of the Leuhman Ridge area of Edwards Air Force Base, California, conducted between April 2020 and June 2021. The report focuses on surficial materials and bedrock to evaluate potential faults and other geologic features that may influence groundwater movement. The preliminary work confirms that the Spring Fault, previously mapped by Dibblee (1960, 1967), is a Quaternary-active fault but does not find convincing evidence to support the existence of the Leuhman Fault (Dibblee, 1960; 1967) within the map area. Several more possible and probable faults are identified by a combination of geomorphic lineaments and brecciated rock. Pleistocene and Holocene eolian deposits are widespread, manifesting as sand sheets, dunes, and admixtures into alluvial fans. Also, an incised pediment forms much of the upland south of Leuhman Ridge. In general, field observations indicate that Quaternary alluvial and eolian deposits are thin; this suggests that secondary bedrock porosity and permeability, defined by degree of weathering and fracture density that includes fault-related fracturing, are more important factors in the location and flow patterns of groundwater.

California↗
USGS1952

Heavy-mineral analysis of sedimentary rocks of northern Alaska

The Navy Oil Unit of the United States Geological Survey has been investigating the geology of Naval Petroleum Reserve No. 4, northern Alaska. As part of this program, heavy-mineral samples were prepared from cores of the test wells and core holes and studied to determine stratigraphic correlations. Using the following criteria: (1) presence of diagnostic minerals or mineral suites; (2) relative abundance of specific minerals; (3) degree of rounding of mineral grains; (4) distinction as to grain form; eight heavy-mineral zones have been recognized in Triassic, Jurassic, Cretaceous, and Quaternary sedimentary rocks. Correlations based on these zones are shown. Source areas and rocks are discussed in relation to geologic history and genesis of the Mesozoic and Quaternary sedimentary rocks.

Open-File Report↗
USGS1964

Ground-water reconnaissance in the Burnt River valley, Baker County, Oregon

The Burnt River valley in southern Baker County, Oreg., is underlain by rocks that range in age from pre-Tertiary to Quaternary. The pre-Tertiary rocks consist mainly of argillites, schists, limestones, and intrusive igneous rocks, while the Tertiary rocks consist mainly of felsic and mafic volcanic tuffs, lava flows and breccias, and fluviolacustrine deposits. Quaternary rocks include terrace gravels of Pleistocene and Recent age, and stream-valley alluvium of Recent age. The rock units most widely exposed along the valley are the fluviolacustrine deposits of Miocene and Pliocene(?) age, which extend to depths of as much as a thousand feet below the valley floor, and the pre-Tertiary rocks. Most of the rocks that underlie the valley are of relatively low permeability and yield only small to moderate quantities of water (generally less than 50 gpm) to wells. The fluviolacustrine deposits contain scattered lenses of relatively permeable sand and gravel, hut the unit as a whole is mainly silt and clay of low permeability. Two prospective irrigation wells in the area penetrated these deposits but were abandoned because of insufficient yield. Perhaps the most permeable rock unit in the area is the Columbia River Basalt of Miocene and Pliocene(?) age. It is exposed extensively west of the main valley, but apparently occurs only' as discontinuous lenses beneath the valley floor. Chemical analyses of water from seven wells in the area indicate that the ground waters have relatively large concentrations of dis-. solved mineral constituents. Water from two of the wells had excessive concentrations of boron and high sodium and salinity hazards with respect to use for irrigation. Perhaps the most favorable site for a test irrigation well is about 8 to 10 miles east of Hereford, where the Columbia River Basalt apparently extends beneath, and is intercalated with, the fluviolacustrine deposits.

Oregon↗
USGS1969

Recent surface movements in the Baldwin Hills, Los Angeles County, California

The Baldwin Hills are located in the northwest part of the densely populated Los Angeles basin. They comprise one of several groups of isolated hills that extend along the northwest-trending Newport-Inglewood zone of folds and faults, a structural lineament identified with a series of very productive oil fields. In addition to being the site of the Inglewood oil field, these hills are the site of surface deformation that has been monitored for over 35 years. This record of deformation, which includes differential subsidence, horizontal displacements, and surface rupturing, forms one of the best documented examples of oilfield-associated surface deformation yet recognized. The deformation is described in detail, analyzed as to cause(s), and finally attributed largely or essentially entirely to the exploitation of the spatially-associated Inglewood oil field. The Baldwin Hills are underlain by gently to moderately arched and conspicuously faulted Cenozoic sedimentary and volcanic rocks that overlie crystalline basement rocks at a depth of more than 10,000 feet. The Inglewood fault, a part of the northwest-trending Newport-Inglewood zone, diagonally transects the hills. Right-lateral displacements of 3,000-4,000 feet since middle or late Pliocene time and 1,500-2,000 feet during Quaternary time are indicated by offset structural and physio-graphic features; indications of vertical separations of up to about 200 feet during late Quaternary time occur locally. Evidence of continuing deformation includes recognized seismicity and regional elevation changes. The M5-5 1/2 Inglewood earthquake of 1920, the largest local earthquake of record, is believed to have originated immediately southeast of the Baldwin Hills; it was apparently unassociated with surficial fault displacements. Leveling in and around the west and central Los Angeles basin has shown that lowland stations have been consistently subsiding, whereas foothill stations commonly have been rising. Several seemingly persistent basins of differential subsidence and a zone of positive movement, roughly coincident with the Newport-Inglewood zone, have also been identified in the northwest part of the basin. A prominent, elliptically-shaped, northwest-trending subsidence bowl encompassing the northwest part of the Baldwin Hills, has been defined by repeated level circuits. Partial reconstruction of selected level circuits with respect to a common, relatively stable control point (Hollywood E-11), located on the edge of the subsidence bowl, has permitted evaluation of the subsidence since 1910 and 1911 at two points near the center of the bowl. Thus bench mark PBM 67 is estimated to have subsided approximately 4.324 feet between June 1910 and February 1963; and bench mark PBM 68 (the only bench mark within the subsidence bowl that was leveled prior to 1926 and has been repeatedly leveled since) subsided 3.846 feet between November 1911 and June 1962. Analysis of the available data indicates little if any elevation change at PBM 68 (or elsewhere throughout the Baldwin Hills-Inglewood area) associated with the Inglewood earthquake of 1920. Maximum subsidence of PBM 122 (which has remained very close to the center of subsidence since at . least 1950) between 1911 and 1963 is calculated to have been 5.67 feet. Horizontal displacements (with respect to a north-south base line about 3 miles east of the hills) of six triangulation points within the subsidence bowl have been measured for various periods between 1934 and 1963. Displacements have been generally toward the center of subsidence and almost precisely perpendicular to the immediately adjacent isobases of equal elevation change. Maximum movement has been recorded at triangulation point Baldwin Aux, which was displaced 2.21 feet between 1934 and 1961; horizontal displacements of three additional points ranged from 0.95 foot to 1.85 feet between 1936 and 1961. Displacements of 0.10-0.29 foot were recorded at all six monuments during the period 1961-1963. "Earth cracks" and surficial fault displacements were recognized in the Baldwin Hills at least as early as 1957. The cracks are relatively straight, generally continuous fractures confined to the structural block east of the Inglewood fault; they are concentrated in two areas centering on (1) the Baldwin Hills Reservoir and (2) the Stocker Street-LaBrea Avenue-Overhill Drive intersection. The cracks trend north to north-northeast and are nearly everywhere parallel to or coincident with minor faults and joints, and are generally orthogonal to radii emanating from the center of subsidence. Differential movement along the cracks has been almost entirely dip slip along steep to nearly vertical surfaces, and generally down-dropped toward the center of subsidence. Cumulative displacements have been as much as 6 or 7 inches. Rates of displacement have ranged widely, and the movement has generally occurred as creep or very small discrete jumps. A probable exception is the several inches of differential movement that is believed to have occurred along a crack through the floor of the Baldwin Hills Reservoir on or about December 14, 1963. The contemporary surface movements are attributable to one or more of the following phenomena: (1). exploitation of the Inglewood oil field; (2) changes in the ground-water regimen; (3) compaction of sedimentary materials in response to surface loading; (4) tectonic activity. The following considerations indicate that the differential subsidence is attributable largely or entirely to exploitation of the underlying Inglewood oil field: (1) the coincidence of the centers of the oil field, the producing structure, and the subsidence bowl; (2) the general correspondence between the pattern of subsidence and the outlines of the oil field; (3) the approximate coincidence between the initiation of production and the initiation of subsidence; (4) the generally linear relations between various measures of subsidence and liquid production from both the field as a whole and the exceptionally prolific Vickers zone in particular; (5) the sharp deceleration of subsidence in the eastern block of the field coincident with the initiation of full-scale water flooding there; (6) the many examples of oil fields In which both spatial and temporal associations between production and subsidence are recognized; (7) the many similarities of the subsidence-production relations in the Inglewood field to those in the Wilmington field, where the subsidence has been authoritatively attributed to oilfield operations; (8) the theoretical relation between subsidence or a tendency toward subsidence and increased effective pressure associated with underground fluid extraction. Consideration of six possible explanations for the increasing rather than decreasing or constant rate of subsidence with respect to reservoir fluid pressure decline suggests that measured or calculated down-hole reservoir fluid pressure decline is non-representative of average or real fluid pressure decline away from producing wells. The near-linear relations between net-liquid production and subsidence are explained through analogy with a tightly confined artesian system of infinite areal extent, where production must derive from liquid expansion and/or reservoir compaction. Test data from compaction studies in two other oil fields yield estimates of ultimate compaction of the Vickers zone resulting from a total loss of fluid pressure; these estimates range over an order of magnitude. The best estimate, based on these data and considerations of late Cenozoic history in the Baldwin Hills area, is about 10 feet. The centripetally-directed horizontal movements are considered attributable to exploitation of the Inglewood oil field on the basis of: (1) their well-defined symmetrical and geometrical association with the differential subsidence; (2) the similarities between these associations and those developed in and around other subsiding oil fields; and (3) the mechanical compatibility of these movements with subsidence induced by the extraction of subsurface materials. The earth cracks and surficial fault displacements are considered largely or entirely attributable to the exploitation of the Inglewood oil field on the basis of: (1) their spatial and temporal relations to both oil-field operations and the differential subsidence; (2) the similarities of these cracks and displacements to those generated in and around other oil fields and areas of subsurface materials extraction; and (3) surface strain patterns predicted from the measured vertical and horizontal surface movements. The cracks and displacements can i)e explained by an exploitation-based, elastic-rebound model which requires elastic compression of the sedimentary section in response to compaction-induced downdrag within those blocks around the periphery of the subsidence bowl. The measured displacements have been about one-quarter to one-half those predicted for a purely elastic system. Analysis of: (1) the history of ground-water extraction within and around the Baldwin Hills; and (2) subsidence associated with water-level declines in sediments comparable with those in the Baldwin Hills, indicate that the surface movements can be no more than incidentally attributed to changes in ground-water conditions. Similarly, analysis of the history of natural and artificial changes in surface loading indicate that these movements are generally unassociated with changes in surface loading conditions. Considerations of local geologic history and various tectonic associations indicate that it is very unlikely that the differential subsidence and horizontal movements are due to tectonic downwarping. There exists a far stronger prima facie argument for tectonic involvement in the earth cracking and associated fault displacements. This argument is disputed by; (1) the spatial and temporal relations of the earth cracks to, and their mechanical compatibility with, the nontectonic differential subsidence; (2) the absence of displacements on the Inglewood fault in conjunction with those along the conjugate earth cracks; (3) the probability that purely tectonic displaceMents would be characterized by oblique or strike slip; and (4) the absence of any clear temporal relation between crack growth and local seismicity, However, because as much as 10 percent of the local isobase gradient may be unexplained' by oil-field exploitation, a small fraction of this gradient, and thus the displacements among the southern group of cracks, may be attributable to tectonic activity. This fraction should have been insignificant in the presence of the strain pattern produced by nontectonic compaction of the underlying oil measures. Because nearly all of the observed and measured surface movements can be fully explained as the products of oil-field operations, yet can be no more than incidentally attributed to changes in ground-water conditions, surface loading, or tectonic activity, we conclude that these movements are attributable largely or essentially entirely to the exploitation of the Inglewood oil field.

California↗
USGS1971

Ground-water reconnaissance of selected sites in Rocky Mountain National Park and Shadow Mountain National Recreation area, Colorado

An evaluation of the ground-water supply potential at 30 sites within the Rocky Mountain National Park and Shadow Mountain National Recreation Area was made by the U.S. Geological Survey in 1967 and 1968. The work consisted of a geohydrologic reconnaissance, well inventory, and test drilling. The study sites are underlain by. Precambrian crystalline rocks, Tertiary sediments, or Quaternary glacial and alluvial deposits. The crystalline rocks are generally poor aquifers; however, some wells intercepting fractures may yield as much as 10 gallons per minute from wells 100 to 200 feet deep. Wells drilled in Tertiary sandstones to a depth of 50 to 500 feet may supply 1 to 50 gallons per minute. Wells drilled in unconsolidated glacial and alluvial deposits of Quaternary age yield the largest supplies of ground water in the Rocky Mountain National Park. These deposits commonly can supply 5 to 100 gallons per minute to wells.

Open-File Report↗
USGS1969

Seismic environment of the Burro Flats site, Ventura County, California: a brief, limited literature review

A limited review of available literature suggests that the maximum horizontal ground acceleration at the Burro Flats site from earthquakes in the region could range from less than 0.1 to 0.49 g. A magnitude 8 earthquake on the nearby San Andreas fault could produce ground acceleration in the range 0.18 to 0.31 g, and an expectable larger earthquake on that fault could produce larger accelerations. Ground motion from possible smaller but closer earthquakes ranges up to 0.49 g for an earthquake of magnitude 6.5 on the adjacent "Burro Flats fault". Estimation of these accelerations is dependent on determining the geologic environment of the site, the appropriate earthquake magnitudes to be assigned significant faults in that environment, and the attenuation of shaking between the earthquake epicenters and the site. The site lies within a tectonically active region--the historically active San Andreas fault is only 34 miles to the northeast, and lesser faults showing evidence of late Quaternary displacement are located closer to the site. Evidence for youthfulness of these lesser faults varies, and except for the active Newport-Inglewood zone and the Santa Ynez fault, they qualify as possible but as yet-unproven active faults. All known faults with appropriate length to site-distance ratios that are reasonably classed as late Quaternary faults are discussed, and are included as potential earthquake generators. Earthquakes of appropriate magnitude to be assigned to each fault are determined by assuming rupture in one event of half the map length of the fault, and applying relations (determined by several authors) between earthquake magnitude and rupture length in historic events to determine magnitudes. These magnitudes are, for the purposes of this brief review, probably reasonable estimates of the capabilities of each fault, although earthquakes of larger magnitude are possible. Accelerations are then determined by assuming earthquakes of the above determined magnitude placed at the closest point to the site on the fault trace, and applying attenuation curves of three different authors. Considerable uncertainty is inherent in the rough estimates of seismic accelerations made herein, for they are dependent on a chain of judgments, each of which, in itself, is uncertain. Present knowledge of the geology of the region is incomplete, so that geometry and structural relations of the faults are in part uncertain, and much evidence bearing on the youth of the faults has yet to be gathered and evaluated. Estimation of earthquake magnitude is also uncertain, and even assuming that approximate magnitude is known rather than estimated from fault length, estimates of maximum ground acceleration may differ greatly depending on the authority used. Further consideration of ground acceleration at the site might refine the estimates made herein and resolve the apparent contradictions between the authorities cited. Attention to frequency and duration of strong shaking would also be appropriate. This study was undertaken at the request of A. J. Pressesky, Assistant Director for Nuclear Safety, Division of Reactor-Development and Technology, U.S. Atomic Energy Commission, in March, 1969. It is based on a brief review of pertinent literature to which the authors had immediate access during the few weeks (April-May, 1969) available for report preparation. Because the report is limited both in scope and thoroughness, it must be considered no more than a first estimate of the tectonic and seismic environment of the Burro Flats site, and should not be considered sufficient, in itself, as a basis for design. The report is intended, however, to indicate the breadth of inquiry that is necessary in the consideration of ground acceleration at sites in California, and to indicate the incomplete status of geologic mapping and other geologic studies in the region. The report describes the tectonic environment of the Burro Flats site, discusses 10 pertinent faults individually, and presents possible earthquake magnitudes for those faults and resultant potential ground accelerations at the site.

California↗
USGS1975

Metallogenic provinces of the southeastern Pacific region

Metalliferous mineral deposits of the southeastern Pacific region include: (1) hydrothermal, magmatic, and sedimentary deposits of the Andean region, one of the great mineral belts of the world; 2) Scattered hydrothermal mineral occurrences in the Antarctic Peninsula; and 3) metal-enriched pelagic sediments, ferromanganese nodules, and volcanic rocks(?) in the southeast Pacific basin. Andean metalliferous deposits, the chief concern of this report, are for the most part spatially and genetically related to calc-alkaline plutons, sub-volcanic intrusions, and volcanic rocks emplaced during the Andean orogeny of Late Triassic to Quaternary age. These deposits are components of a single metallogenic province superimposed on two or more pre-Andean metallogenic provinces that are indicated by scattered deposits of Paleozoic and Precambrian(?) age. Occurrences in the Antarctic Peninsula are of age and origin similar to the deposits in the Andes and are considered to belong to the Andean province. The Andean metallogenic province may be divided into several subprovinces, each parallel to the Andes and the continental margin and each having a dominant metal or suite of metals. The central Andes of Peru, northern Chile, and Bolivia, which contain the greatest concentration of exploitable deposits and the greatest variety of ore types, have as many as five linear partly overlapping subprovinces. These sub-provinces, from west to east (Pacific coast to the eastern Andean front), are characterized, respectively, by deposits of : 1) iron; 2) copper, with or without associated gold; 3) polymetallic base metals (zinc, lead, copper), generally containing silver; 4) tin; and 5) gold. Iron deposits chiefly are near the coast in central to northern Chile and in southern Peru. The copper and polymetallic provinces are characterized by abundant deposits in the central Andean region but comparatively few scattered deposits in the north (Ecuador, Colombia, and Venezuela) and in southern Chile and Argentina. Scattered gold-rich veins and placers occur along the western Andean front and coastal region, the general area of the copper province, from central Chile to northern Colombia. Similar deposits occur along a discontinuous belt in the eastern Andes from Bolivia to Ecuador and in the central Andes of Colombia. Tin deposits are almost wholly restricted to the eastern Andes of Bolivia. The position and age distribution of plutonic and volcanic rocks and associated metalliferous deposits of the Andes indicate presence of an active subduction zone in this region since at least Late Triassic time. Magmas of the calc-alkaline igneous rocks are believed to have formed chiefly by partial melting of mantle, oceanic sediments, and oceanic crust along the Benioff zone at depths of 100 to 200 km. Plutonic and volcanic rocks show a general though nonuniform progression of decreasing age from west to east. Rocks of Jurassic and Cretaceous age are most abundant near the coast, whereas those of Tertiary and Quaternary age dominate in the Andes. Locally, intrusive rocks and ore deposits of widely different ages are juxtaposed. Metals of the ore deposits associated with the calc-alkaline rocks were supplied by the source rocks in the Benioff zone, some of which probably had been previously enriched in certain metals at the ancestral East Pacific Rise and were mobilized or assimilated from metal-rich zones in the overlying mantle and continental crust by magmas rising from the Benioff zone.

Open-File Report↗
USGS1976

Sampling procedures and catalogue of samples for eight boreholes at Clear Lake, Lake County, California

Clear Lake, California, is situated in an area which has been subject to crustal movement, earthquake-generated ground shaking, volcanic eruptions, and climatic fluctuations during late Quaternary time. The U.S. Geological Survey, in cooperation with Lake County, has undertaken a study of the seismic, volcanic, and environmental history recorded in the late Quaternary sediments beneath the floor of the lake (Sims, 1974). This study is based on continuous core samples measuring 12 cm or 15 cm in diameter that were obtained in August-November, 1973, from 8 boreholes measuring 14-113 m in length (Figure 1). Preliminary description of many of these samples and interpretation of ancient seismic events can be found in Sims and Rymer (1975). Over 2,000 multiple samples have been taken from these cores in order to study the environmental record preserved in the lacustrine sediments. Samples were taken for pollen, diatoms, cladocera, bulk mineralogy, fine size analysis, macrofossils, and water-content/organic carbon-content at designated depths. In addition, volcanic ash and radiocarbon samples were removed for correlation studies and age determinations. This report provides a description of the standard sampling procedures designed for sapropelic muds and peat-rich clays, a description of modified sampling procedures developed for sampling sands and coarser sediments, and a catalogue of samples from the Clear Lake cores. Table 2 outlines the steps followed for the standard sampling procedures.

California↗
USGS1977

Surface sedimentary units of the Gulf of Alaska continental shelf: Montague Island to Yakutat Bay

Four major sedimentary units occur on the sea floor of the continental shelf in the northern Gulf of Alaska. These units, defined on the basis of seismic and sedimentologic data, are: (1) Holocene sediments, (2) Holocene mind moraines, C3) Quaternary glacial marine sediments, and (4) Tertiary and Pleistocene lithified deposits. A wedge of Holocene fine sand to clayey silt covers most of the inner shelf, reaching maximum thicknesses of about 350 m seaward of the Copper River and about 200 m seaward of Icy Bay. Holocene end moraines are found at the mouth of Icy Bay, south of Bering Glacier, and at the mouth of Yakutat Bay. Quaternary glacial marine sediments are found in a narrow arc that borders, on the north and west side of Tart Bank and in a large arc 20 km or more offshore that parallels the shoreline between Kayak Island and Yakutat Bay. Tertiary or Pleistocene stratified sedimentary rocks, which in profile commonly are folded, faulted, and truncated, crop out on Tarr Bank, offshore of Montague Island, and in several localities southeast and southwest of Cape Yakataga. The lack of Holocene cover on Tarr Bank and Middleton, Kayak and Montague Island platforms may be due to the scouring action of swift bottom currents and large storm waves. West of Kayak Island the Copper River is the primary source of Holocene sediment. East of Kayak Island the major sediment sources are streams draining the larger ice fields, notably, the Malaspina and Bering Glaciers. Transport of bottom and suspended sediment is predominantly to the west. If deglaciation of the shelf was completed by 10,000 years B.P., maximum rates of accumulation of Holocene sediment on the inner shelf may be as high as 10-35 m per 1,000 years.

Open-File Report↗
USGS1977

Geology of the Monterey Bay region

Geophysical data and sea floor samples collected from the continental shelf and slope between Ano Nuevo Point and Point Sur, California indicate that the Monterey Bay region has had a complex late Cenozoic tectonic history. Uplift and depression have produced a succession of regressive and transgressive sedimentary units, while contemporaneous right-slip along faults of the San Andreas system have offset major structural and lithologic elements. This deformation produced three regional and several local unconformities within upper Tertiary rocks and initiated development of a canyon system that today includes the Monterey, Ascension, Carmel, and other large submarine canyons. The Tertiary stratigraphy of the offshore Monterey Bay area is divided into two provinces by a major structural boundary, the north-trending Palo Colorado-San Gregorio fault zone. East of this zone in the offshore are four seismically distinct sequences that can be correlated with major sequences onshore. These sequences comprise (1) pre-Tertiary basement, and (2) middle Miocene, (3) upper Miocene to Pliocene, and (4) upper Pliocene to Holocene sedimentary intervals. Each of the latter three sequences is bounded by unconformities, as is its counterpart on land. Only Neogene sedimentary rocks are present offshore; Paleogene units, if originally present, have been removed completely by pre-middle Miocene erosion. An extensive erosional surface was cut during Zemorrian time into the late Mesozoic granitic basement rocks. Incised into this surface are the ancestral Monterey Canyon and an unnamed canyon. Marine sedimentary rocks of upper Miocene and Pliocene age overlie this unconformably and fill the unnamed canyon. Similar rocks also may have once filled Monterey Canyon. Near shore these strata are covered by terrestrial alluvial and eolian deposits, deltaic deposits, marine canyon fill, landslide and slump deposits, and unconsolidated sediments that range in age from upper Pliocene to Holocene. Monterey Canyon appears to have been filled and exhumed at least twice since its inception in Oligocene time, once in late Miocene and once in Pleistocene time. Three major seismic stratigraphic units are apparent in continuous seismic reflection profiles from the offshore area west of the Palo Colorado-San Gregorio fault zone. These are (1) acoustical basement, and (2) middle Tertiary and (3) late Tertiary to Quaternary sedimentary intervals. Acoustical basement comprises Cretaceous to early Tertiary sedimentary rocks, Mesozoic or older metamorphic rocks, and Cretaceous or Jurassic rocks of the Franciscan assemblage. The middle Tertiary sequence consists of sedimentary rocks of questionable Miocene age. The late Tertiary to Quaternary sequence is composed of Pliocene sedimentary rocks and unconsolidated marine sediments, and submarine landslide and slump deposits. Seismic reflection surveys indicate two major, intersecting, northwest-trending fault zones to be present in the offshore Monterey Bay area. The Palo Colorado-San Gregorio fault zone may be more than 200 km long; it is narrow (approximately 3 km wide) and is represented in most places by one or two faults. This zone appears to connect with faults mapped on land near Ano Nuevo Point and Point Sur. The Monterey Bay fault zone, located in the area between Santa Cruz and Monterey, is a diffuse zone, approximately 10 to 15 km wide, of en echelon faults. Faults within this zone appear to connect with faults on land near Monterey, and the zone appears to be truncated by the Palo Colorado-San Gregorio fault zone west of Santa Cruz. Locations of more than 110 earthquakes (1968-1976) show that the newly mapped fault zones in Monterey Bay are seismically active. Epicenters in the bay form two clusters, one at the intersection of the Monterey Bay and Palo Colorado-San Gregorio fault zones, and the other in a linear belt that trends northwest along the Palo Colorado-San Gregorio fault zone. Faults within th

California↗