Geology Reports⌕ Search

SEARCH · Geology Reports

Results for “Petrology”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 901 records · Page 50Linked to original sources
USGS1981

Origin of chert grains and a halite- silcrete bed in the Cambrian and Ordovician Whitehall Formation of eastern New York State

A chert bed in the Whitehall Formation (Cambrian and Ordovician) of eastern New York State is strikingly similar in petrography and inferred origin to Australian and South African silcretes. The chert in the Whitehall, like its Australian and South African counterparts, occurs along an erosion surface that formed subarially, and it contains colloform chalcedony and abundant ferruginous minerals. This chert also contains pseudomorphs and ghosts of halite. Silica precipitated from a solution that became enriched in electrolytes as a result of dissolving halite. Sand-size chert grains in the Whitehall are petrographically like the Whitehall silcrete and are probably grains of reworked silcrete.

Journal of Sedimentary Petrology↗
USGS1981

Progradational sequences in Miocene shoreline deposits, southeastern Caliente Range, California

An exceptionally well exposed marine-nonmarine transition in middle Miocene strata exists in the southeastern Caliente Range, California. About 50 individual progradational sequences form a succession that ranges in thickness from approximately 1000 m (where predominantly nonmarine) to more than 2500 m (where predominantly marine). Paleogreographic evidence in basalt flows near the top of the succession and in overlying fluvial deposists indicates that these middle Miocene strata were deposited across a north-northwest trending shoreline. A complete progradational sequence typically is several meters to a few tens of meters thick and includes strata that represent three intertonguing stratigraphic units. Individual sequences generally rest on a thin gravel deposit interpreted as a transgressive lag on an erosional surface. The gravel is overlain by structureless siltstone or fine-grained sandstone deposited at water depths where the rate of faunal mixing exceeded that of production of structures by physical processes. These rocks grade upward into bedded fine sandstone deposited closer to shore where physical processes exceeded bioturbation. Crossbedded lenses of coarse sand or fine gravel in the upper part of this facies suggest the presence of failry long-period surface waves. The bedded fine sandstone is sharply overlain by a crossbedded coarse sandstone facies that is interpreted as a combined offshore bar-rip channel-surf zone assemblage. Cross-strata dip dominantly offshore, suggesting substantial deposition from rip currents. A secondary, shore=parallel mode of cross-strata direction suggests longshore currents produced by surface waves from the northwest. The crossbedded coarse-grained sandstone grades upward into planar-bedded medium-grained sandstone that is interpreted as a beach foreshore. This facies grades upward through structureless medium-grained sandstone into nonmarine or lagoonal red and green mudstone of the Caliente Formation. The middle Miocene succession was deposited in a subsiding basin that was otherwise remarkably stable tectonically; the position of the strand line differed no more than a few kilometers through a period of 1 to 3 m.y. The average duration of the transgressive-regressive cycles, a few tens of thousands of years, together with their distribution in groups of three or four in the lower two-thirds of the succession, is consistent with the pattern of long-term climatic cycles produced by periodicity of the earth's solar orbit and may be related to eustatic sea level changes attendant to the development of the Antarctic ice cap. Changes in the pattern of progradation in the upper part of the succession and nearby basaltic eruptions may hav been precursors to the onset of movement along the San Andreas fault in this area 12-14 m.y. ago.

California↗
USGS1981

Swash mark and grain flow

Swash marks composed entirely of coarse sand are commonly found on coarse-sand beaches. These swash marks are 10 to 30 centimeters in width and a few millimeters to one centimeter in height. Previous observations, mostly on finer-sand beaches, indicate swash marks are seldom over a few millimeters in height and are commonly composed of material readily floated by surface tension (e.g., mica flakes and shell fragments). Swash marks composed of coarse sand have both fining seaward and fining with depth trends in grain size. Apparently, the leading margin of a wave upwash drives a highly concentrated flow of grains in which both grain size and grain velocity decrease with depth. Therefore, large grains are transported at greater velocities than are smaller grains. Thus, at the maximum advance of an upwash, a swash mark is deposited which has the observed fining seaward and fining with depth trends in grain size.

Journal of Sedimentary Petrology↗
USGS1981

Geochemical evidence for modern sediment accumulation on the continental shelf off southern New England

An area of fine-grained sediment approximately 170 km x 74 km in size, located in water depths between 60 m and 150 m, south of Martha's Vineyard, Mass., is a site of modern sediment deposition. The 14 C ages systematically increase with sediment depth from about 1,300 years B.P. at the surface to 8,000-10,000 years B.P. at the depth of maximum core penetration. The old age for the surface sediments probably results from a combination of deposition of old carbon and faunal mixing. In the finest sediments, the sedimentation rates were approximately 130 cm/1,000 yrs when deposition began and have decreased to about 25 cm/1,000 yrs. The decreasing sedimentation rate reflects a diminishing source of fine sediments, which presumably came from the Georges Bank and Nantucket Shoals area. Inventories of excess 210 Pb in undisturbed cores average 70 dpm/cm 2 (disintegrations per minute per square centimeter), more than two times higher than the flux of 210 Pb from the atmosphere and from 226 Ra decay in the overlying water. This additional influx of 210 Pb either must be with new fine-grained sediment material or from solutions that are stripped of their 210 Pb by particulates in the bottom nepheloid layer. Stable Pb concentrations in surface sediments are about 28 ppm, as much as two times higher than concentrations at depth. The high accumulation rates, 210 Pb inventories, and trace-metal profiles imply that this area is a modern sink for fine-grained sediments and for pollutants associated with particulate matter in the water column. To our knowledge, this is the only site of present-day natural deposition on the Continental Shelf off the eastern United States, exclusive of the Gulf of Maine. Because the net currents on the outer half of this Continental Shelf flow from northeast to southwest, this fine-grained deposit may receive its sediments and possible contaminants from the Nantucket Shoals and Georges Bank regions.

Massachusetts↗
USGS1981

Authigenic kaolinite and associated pyrite in chalk of the Cretaceous Niobrara Formation, Eastern Colorado

Cores from the Smoky Hill Chalk Member of the Cretaceous Niobrara Formation have several zones containing authigenic kaolinite as spherical, moldic, polycrystalline aggregates that occur within single or multichambered foraminiferal tests and are commonly associated with framboidal pyrite. Such kaolinite is inferred to result from volcanic ash deposited during chalk sedimentation. Shortly after burial, a colloidal aluminous gel or solution formed from the unstable ash and moved into organic-rich foraminiferal tests, where sulfate-reducing bacteria created a favorable microenvironment for the simultaneous crystallization of kaolinite and pyrite.

Journal of Sedimentary Petrology↗
USGS1981

Depositional environments of the Pennsylvanian Pottsville Formation in the Black Warrior basin of Alabama

The Pennsylvanian Pottsville Formation of the Black Warrior basin in Alabama comprises as much as 3000 m of shale, sandstone, and coal. The boundary between the informal units of the lower Pottsville and the upper Pottsville is the base of the Black Creek coal group, in the middle part of the section. Lower Pottsville strata include orthoquartzitic sandstone, shale, and coal interpreted as having been deposited in a barrier/back-barrier setting. Upper Pottsville strata consist of lithic arenite, shale, coal, and minor amounts of orthoquartzite, and are interpreted as representing a lateral gradation from lower delta plain to barrier bar. Previous studies indicated northward sediment dispersal. The change in sedimentation patterns in the middle part of the Pottsville suggests introduction into the basin of sediments from an eastern source during Pottsville deposition.

Journal of Sedimentary Petrology↗
USGS1981

Reservoir properties of submarine- fan facies: Great Valley sequence, California

Submarine-fan sandstones of the Great Valley sequence west of the Sacramento Valley, California, have low porosities and permeabilities (64 samples averaged 10.1% porosity and 0.87 millidarcies permeability). However, petrography and scanning electron microscope studies indicate that most sands in almost all submarine fan environments are originally porous and permeable. Thin turbidite sandstones deposited in areas dominated by shale in outer-fan, basin-plain, and overbank environments are cemented mainly by calcite; shale dewatering is inferred to contribute to rapid cementation early in the burial process. Sands deposited in inner- and middle-fan channels within interchannel and fan-fringe environments that contain only thin shale beds have small percentages of intergranular matrix or cement. The original porosity is substantially reduced mechanically at shallow depths and by pressure solution at deeper levels. Permeability decreases systematically with increasing age of the rocks, presumably as a result of increasing burial depths. Computer-run stepwise regression analyses show that the porosity is inversely related to the percentage of calcite cement. Such parameters as the contents of quartz, feldspar, and unstable rock fragments have no correlative effect on either porosity or permeability. The results reported here indicate original porosity and permeability can be high in deep-water submarine fans and that fan environments dominated by sand (with high sand/shale ratios) are more likely to retain higher porosity and permeability to greater depths than sand interbedded with thick shale sequences.

Journal of Sedimentary Petrology↗
USGS1982

Cyclic deposits and hummocky cross-stratification of probable storm origins in Upper Cretaceous rocks of the Cape Sebastian area, southwestern Oregon

Cyclic deposits containing hummocky cross-stratification occur in the upper part of the Cape Sebastian Sandstone of Bourgeois (1980), a shallow marine transgressive sandstone of Late Cetaceous age on the southern Oregon coast. The cycles average 1.6 m in thickness and consist, where complete, of a lower hummocky cross-stratified sandstone, a middle planar and ripple bedded sandstone with a shale bed in its middle part, and an upper bioturbated sandstone. Noteworthy features of the hummocky cross-stratification include the presence of depositional domes in addition to scoured depressions, the absence of significant bedform migration, and the presence of a small proportion of dip angles greater than the angle of repose (>34 degrees ) in addition to the large proportion of low (<15 degrees ) dip angles. The lower, stratified, fining-upward part of the cycle (up to the top of the shale bed) is interpreted as having accumulated under conditions of initially great but gradually decreasing current velocity and deposition rate. The currents probably had a strong oscillatory component, and the depositional event is inferred to have been a storm. The part of the planar- and ripple-bedded sandstone above the shale bed was probably deposited during relatively fair weather after the storm but before re-establishment of a normal benthic fauna. The bioturbated sandstone is interpreted to have been deposited during fair weather or during minor storms separated by long intervals of fair weather.

Journal of Sedimentary Petrology↗
USGS1982

Dynamic ice-wallow relief of northern Alaska's nearshore

Contour maps with 0.5-m depth interval were prepared for a small area seaward of Reindeer Island, a barrier island in the Beaufort Sea, Alaska, by repeated surveys with very accurate navigation and very close trackline spacing. The maps reveal numerous closed depressions and mounds about 50 to 100 m in diameter and 2 to 3 m in relief, presumably related to grounded ice floes common in the area year round. Some of the features were obliterated over the course of three seasons while new ones formed. Although the depressions resemble kettles, they are formed by very different mechanisms. We believe that these bedforms represent erosion and deposition caused by: a) intensified flow around stationary ice floes serving as obstacles and b) pulsating currents generated by vertical oscillations or rocking motions of grounded floes in a seaway. Because sediment transport occurs around the ice, not where it directly touches the sea floor, the depressions are much larger than the base of the acting floes. Ice-wallow bedforms, although not found everywhere, are characteristic of arctic nearshore regions with non-cohesive sediments, and most likely occur in other ice-stressed coastal environments in differing degrees. The bedforms studied here are highly active and must be considered in planning nearshore construction activities.

Journal of Sedimentary Petrology↗
USGS1982

Modern shallow-water graded sand layers from storm surges, Bering Shelf: a mimic of Bouma sequences and turbidite systems

A sequence of graded sand layers, interbedded with mud, extends offshore over 100 km from the Yukon Delta shoreline across the flat, shallow (<20 m depth) epicontinental shelf of the northern Bering Sea, Alaska. Proximal graded sand beds on the delta-front platform near the shoreline are coarser (2-3phi ), thicker (10 to 20 cm), and contain more complete vertical sequences of sedimentary structures than distal beds. The inshore graded vertical sequence of structures from the base to the top of individual sand layers includes plane-parallel lamination (S b ), cross lamination (S c ), plane-parallel lamination (S d ), and mud (S e ) analogous to the Bouma T (sub a-e) turbidite sequence. Structures vary between interchannel platform deposits with complete S b -S e sequences and channel-floor sands that are all trough cross-laminated. Distally, storm-sand layers change to thin (1 to 5 cm) silt beds that contain flat and ripple-drift lamination (S (sub c-e,de) ), are commonly bioturbated, and are associated with shell and pebble lags from storm-wave reworking. The sequence of graded sands appears to be related to the major storm surges that occur every several years. The major storms increase the average 10-m water depth in southern Norton Sound as much as 5 m and cause fluctuations in pore pressure from wave cyclic loading that may liquefy the upper 2 to 3 m of sediment. Storm-associated bottom currents, possibly dominated by rapidly waning ebb flow, transport the liquefied inshore sand far offshore (> 100 kin). Such shallow-water graded layers off lobate deltas may be distinguished from similar deep-water turbidites by: 1) the predominance of trough cross-lamination, perhaps resulting from wave oscillation effects, in the proximal part of the system, and 2) gradation to common shallow marine fossils, bioturbation, and storm lag layers in distal areas.

Journal of Sedimentary Petrology↗
USGS1982

A rapid method for concentrating sedimentary organic matter for vitrinite reflectance analysis

The tecnique discussed in this paper utilizes crushing, high-speed blending, and ultrasonic treatment to mechanically disaggregate rock and release the sedimentary organic matter (OM) in a suitable heavy liquid. This new method can provide freeze-dried concentrated OM in approximately 8 to 24 hours (longer time is necessary for removing carbonate). Under optimal conditions, it is possible to concentrate the OM and prepare a hardened epoxy microscope slide in about 24 hours. Subsequent grinding, polishing, and drying allows microscopic examination of the organic concentrate the next day.

Journal of Sedimentary Petrology↗
USGS1983

Authigenic vivianite in Potomac River sediments: control by ferric oxy-hydroxides

Sand-size particles of vivianite (Fe 3 (PO 4 ) 2 .8H 2 O) have been identified in surficial sediments of the tidal Potomac River near a major sewage treatment plant. Vivianite is concentrated in a surface layer of coarse-sand dredge spoil, which overlies much finer sediment. Although saturation indices indicate that the pore waters of virtually all the sediments in the study area are supersaturated with respect to vivianite, it is found only in association with dredge spoil. Pore-water profiles of Fe, P, and Eh, and the size and morphology of individual grains, indicate that the vivianite is authigenic. The major control on the occurrence of the mineral is the presence or absence of amorphous ferric oxy-hydroxides, which react with pore-water phosphorus to form stable ferric hydroxy-phosphates preferentially to the formation of vivianite.--Modified journal abstract.

Journal of Sedimentary Petrology↗
USGS1983

Mechanical and chemical compaction in fine-grained shallow-water limestones

Artificial compaction of in-situ cores of sediments resulted in: 1) reduction of sediment thickness by 50 percent and more; 2) reduction of initial porosities of 65 to 75 percent to 35 to 45 percent; 3) creation of megascopic textures almost identical to many ancient lime mud- and wackestone; 4) creation of organic, wispy "stylolite-like" layers; 5) chemical compaction, evidenced by thin sections showing quartz grains piercing mollusc shells without causing fractures and SEM evidence of solutional interfitting of 1 to 4-mu m-size aragonitic carbonate grains; 6) obliteration of pellets and birdseye or fenestral voids in those sediments where early cementation was lacking; obliteration of identifiable marine grasses and vertical "root" tube voids; 8) mashing of sediment-filled circular burrows to produce ellipsoidal structures. Significant mechanical compaction resulted from pressures simulating less than 1,000 ft of burial. Increasing loads to more than 10,000 ft did not significantly increase compaction. Chemical compaction was detected only in cores compacted to pressures greater than 10,000 ft of burial. These experiments suggest that chemical compaction would begin at much shallower depths given geologic time. Experiments that caused chemical compaction lend support to the hypothesis that cement required to produce a low-porosity/low-permeability fine-grained limestone is derived internally. Dissolution, ion diffusion, and reprecipitation are the most likely processes for creating significant thicknesses of dense limestones. Continuation of chemical compaction after significant porosity reduction necessitates expulsion of connate fluids, possibly including hydrocarbons.--Modified journal abstract.

Journal of Sedimentary Petrology↗
USGS1984

Submarine sand dunes and sedimentary environments in Oceanographer Canyon.

Observations from research submersibles in the northern part of Oceanographer Canyon reveal the presence of an extensive field of large sand dunes on the canyon floor. The dunes are medium to coarse sand, are oriented across the axis, and the largest of them are as high as 3 m and have wavelengths up to 15 m. Their asymmetry, grain size, and height suggest that they are formed by axial currents flowing up- and downcanyon and that the largest dunes require flows of at least 70 cm/sec. Shelf sand, low in silt and clay content, is transported by currents down and along the canyon walls onto the canyon floor. As the sand enters the canyon, it is mixed with immobile gravel deposits on the canyon rim; lower on the walls, the sand is mixed with silt and clay burrowed by organisms from the semiconsolidated sandy silt that underlies the canyon walls and floor. Upon reaching the canyon floor, the sand is sculpted into bed forms by currents, and the fines are winnowed out and transported out of the canyon. At present, the shelf and canyon walls are being eroded by bottom currents and burrowing organisms, whereas the canyon floor is covered by mobile sand that moves both up and down the axis in this part of the canyon.

Journal of Sedimentary Petrology↗
USGS1984

Rippled scour depressions on the inner continental shelf off central California

Side-scan sonar records taken during the recent Coastal Ocean Dynamics Experiment (CODE) show elongate, shore-normal rippled depressions of low relief on the inner continental shelf off central California between Bodega Bay and Point Arena. These features extend up to 2 km from the coast into water depths of up to 65 m. The proposed mechanism for their generation is storm-generated bottom currents associated with coastal downwelling during the late fall and winter which scour the surficial fine-sand sediment and expose the coarser-sand substrate in the depressions. The zones of most intense erosion and the irregular spacing of the features may be controlled by submerged rock ledges and other prominent coastal features. The large straight-crested ripples within the depressions (heights to 40 cm; wavelengths to 1.7 m) are probably formed by large-amplitude, long-period surface waves generated by winter storms.

California↗
USGS1985

A nomogram for interpreting slope stability of fine-grained deposits in modern and ancient-marine environments.

Design of the nomogram is based on effective stress and combines consolidation theory as applicable to depositional environments with the infinite-slope model of slope-stability analysis. The link between the two combined theories is a term representing the effective overburden stress, which may be predicted from consolidation theory and a knowledge of sedimentation rate, time, and the coefficient of consolidation. In turn, if infinite-slope conditions are assumed to exist, the effective overburden stress can be used to derive a factor of safety against static slope failure by using the angle of internal friction and the slope angle. The nomogram applies to depostitional settings in which fine-grained sediment has accumulated at a relatively constant rate upon a base that is essentially impermeable. The model further assumes that the lateral extent of sediment affected by any mass movement will be great compared to its thickness and that no outside agents (e.g., cements, gas) are influencing the section. The nomogram is applicable to static conditions (inherent stability of the slope) and certain dynamic conditions (such as earthquakes). It may be used to investigate mass movements in the geologic past as well as those in modern environments.--Modified journal abstract.

Journal of Sedimentary Petrology↗
USGS1985

Classification of deep-sea, fine-grained sediments

Most deep-sea sediments contain one or more biogenic components and one dominant nonbiogenic component, usually clay or silty clay. The authors present a descriptive classification scheme in which deep-sea, fine-grained sediments are placed within a three-components system of calcareous-biogenic, siliceous-biogenic, and nonbiogenic components. In a three-procedure the user assesses whether the dominant component is biogenic or nonbiogenic, whether the dominant biogenic component is siliceous or calcareous, and what the relative abundances of the biogenic components are within limits of 10, 25, and 50%. The terminology proposed is that commonly used by many sedimentologists, with some refinements and greater precision in the use of terms.

Journal of Sedimentary Petrology↗