Geology ReportsSearch

USGS · 70011848

Cyclic deposits and hummocky cross-stratification of probable storm origins in Upper Cretaceous rocks of the Cape Sebastian area, southwestern Oregon

Abstract

Cyclic deposits containing hummocky cross-stratification occur in the upper part of the Cape Sebastian Sandstone of Bourgeois (1980), a shallow marine transgressive sandstone of Late Cetaceous age on the southern Oregon coast. The cycles average 1.6 m in thickness and consist, where complete, of a lower hummocky cross-stratified sandstone, a middle planar and ripple bedded sandstone with a shale bed in its middle part, and an upper bioturbated sandstone. Noteworthy features of the hummocky cross-stratification include the presence of depositional domes in addition to scoured depressions, the absence of significant bedform migration, and the presence of a small proportion of dip angles greater than the angle of repose (>34 degrees ) in addition to the large proportion of low (<15 degrees ) dip angles. The lower, stratified, fining-upward part of the cycle (up to the top of the shale bed) is interpreted as having accumulated under conditions of initially great but gradually decreasing current velocity and deposition rate. The currents probably had a strong oscillatory component, and the depositional event is inferred to have been a storm. The part of the planar- and ripple-bedded sandstone above the shale bed was probably deposited during relatively fair weather after the storm but before re-establishment of a normal benthic fauna. The bioturbated sandstone is interpreted to have been deposited during fair weather or during minor storms separated by long intervals of fair weather.

Explore related subjects

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

R. E. Hunter, H. Clifton. 1982. Cyclic deposits and hummocky cross-stratification of probable storm origins in Upper Cretaceous rocks of the Cape Sebastian area, southwestern Oregon. https://doi.org/10.1306/212f7ef5-2b24-11d7-8648000102c1865d

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related USGS reports

Role of microbial processes in linking sandstone diagenesis with organic-rich clays

Numerous chemical reactions within clay sequences have been proposed to produce dissolved material for diagenesis of deeply-buried sands. However, reactions responsible for solubilizing inorganic and organic constituents in clays at intermediate depths, and their importance to sandstone diagenesis, have not been evaluated. Results from this study show that the processes of microbial organic-acid production (via fermentation) in clays and microbial organic-acid consumption (via sulfate reduction) in sands effectively link organic-rich clays to sandstone diagenesis in the Black Creek Formation of South Carolina. Diagenetic processes have resulted in the formation of 10 volume percent calcite cement, 0.1 volume percent authigenic pyrite, and 1.5 volume percent secondary porosity in Black Creek sands. However, the distribution of these diagenetic processes is not uniform, resulting in net destruction of porosity in some parts of the sand and net porosity enhancement in other parts. Mass balance-derived rates of microbial organic-acid production (10 (super -5) mmole carbon 1 (super -1) yr (super -1) ) and microbial CO 2 production (4 x 10 (super -5) mmole l (super -1) yr (super -1) ) show that microbial processes can account for all organic carbon in the calcite cements (at least 11% of carbonate carbon based on isotope-balance calculations), all observed authigenic pyrite, and all observed secondary porosity. These findings show that microbial processes can serve to link organic-rich clays with sandstone diagenesis at intermediate depths.

Journal of Sedimentary Petrology

Lithofacies analysis of colluvial sediments - an aid in interpreting the recent history of Quaternary normal faults in the Basin and Range Province, western United States

Inferring the frequency and magnitude of past earthquakes from the stratigraphy in exposures of normal-faulted sediments is difficult because colluvial lithofacies assemblages adjacent to faults are complex. Similarities in facies assemblages adjacent to young fault scarps in arid to semiarid areas, such as the Basin and Range province, allow lithofacies to be grouped into two genetic architectural elements: debris and wash elements. Upper and lower facies associations can commonly be recognized within each element. A lithofacies code scheme, similar to those used in the analysis of fluvial and glacial lithofacies sequences, provides a concise way of illustrating lithofacies relations in fault exposures. The source lithology of colluvial lithofacies is shown in the code, and soil-horizon symbols can be included. The architecture of lithofacies assemblages near fault scarps in semiarid areas is explained by a model of colluvial sedimentation in response to a single surface faulting event. Analysis of lithofacies assemblages exposed in three trenches across normal faults in the eastern Basin and Range shows how the model can be used to interpret fault histories. Similar facies analysis methods may be useful in interpreting colluvial sequences formed by non-tectonic processes.

Journal of Sedimentary Petrology

Modern sedimentary environments in Boston Harbor, Massachusetts

Analyses of sidescan-sonar records supplemented by available bathymetric, sedimentary, subbottom, and bottom-current data reveal the distributions of the following three categories of sedimentary environments within the glaciated, topographically complex Boston Harbor estuary in Massachusetts. 1) Environments of erosion appear on the sonographs either as patterns with isolated strong reflections or as uniform patterns of strong reflectivity. These patterns define outcrops of bedrock or till and coarse lag deposits that are being scoured and winnowed by tidal- and wave-induced currents. Erosional areas are located primarily along mainland and insular shores, within large channels that have strong tidal currents, atop submerged ridges and knolls, and across much of the harbor entrance. 2) Environments of deposition are depicted on the sidescan-sonar records as smooth, featureless surfaces that have low to moderate reflectivity. Depositional environments are found predominantly over shallow subtidal flats and in broad bathymetric lows where tidal currents are weak. Sediments within depositional areas are organic-rich sandy and clayey silts that are accumulating at rates ranging from 0.01 to 0.11 g/cm 2 /yr or 4000 to 46,100 metric tons/yr. The cumulative mass of modern mud in harbor depocenters is 24.3 million metric tons. 3) Environments of sediment reworking constitute areas affected by a combination of erosional and depositional processes. They are characterized on the sonographs by mosaics of light and dark patches produced by relatively subtle and gradational changes in reflectivity. Reworked sediments have diverse grain sizes that overlap and are transitional between those of the other two sedimentary environments, and they are indicative of highly variable bottom currents.

Massachusetts