SEARCH · Geology Reports

Results for “Reviews in Mineralogy”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5Linked to original sources

USGS2016

A review of single-sample-based models and other approaches for radiocarbon dating of dissolved inorganic carbon in groundwater

Numerous methods have been proposed to estimate the pre-nuclear-detonation 14 C content of dissolved inorganic carbon (DIC) recharged to groundwater that has been corrected/adjusted for geochemical processes in the absence of radioactive decay ( 14 C 0 ) - a quantity that is essential for estimation of radiocarbon age of DIC in groundwater. The models/approaches most commonly used are grouped as follows: (1) single-sample-based models, (2) a statistical approach based on the observed (curved) relationship between 14 C and δ 13 C data for the aquifer, and (3) the geochemical mass-balance approach that constructs adjustment models accounting for all the geochemical reactions known to occur along a groundwater flow path. This review discusses first the geochemical processes behind each of the single-sample-based models, followed by discussions of the statistical approach and the geochemical mass-balance approach. Finally, the applications, advantages and limitations of the three groups of models/approaches are discussed. The single-sample-based models constitute the prevailing use of 14 C data in hydrogeology and hydrological studies. This is in part because the models are applied to an individual water sample to estimate the 14 C age, therefore the measurement data are easily available. These models have been shown to provide realistic radiocarbon ages in many studies. However, they usually are limited to simple carbonate aquifers and selection of model may have significant effects on 14 C 0 often resulting in a wide range of estimates of 14 C ages. Of the single-sample-based models, four are recommended for the estimation of 14 C 0 of DIC in groundwater: Pearson's model, (Ingerson and Pearson, 1964; Pearson and White, 1967), Han & Plummer's model (Han and Plummer, 2013), the IAEA model (Gonfiantini, 1972; Salem et al., 1980), and Oeschger's model (Geyh, 2000). These four models include all processes considered in single-sample-based models, and can be used in different ranges of 13 C values. In contrast to the single-sample-based models, the extended Gonfiantini & Zuppi model (Gonfiantini and Zuppi, 2003; Han et al., 2014) is a statistical approach. This approach can be used to estimate 14 C ages when a curved relationship between the 14 C and 13 C values of the DIC data is observed. In addition to estimation of groundwater ages, the relationship between 14 C and δ 13 C data can be used to interpret hydrogeological characteristics of the aquifer, e.g. estimating apparent rates of geochemical reactions and revealing the complexity of the geochemical environment, and identify samples that are not affected by the same set of reactions/processes as the rest of the dataset. The investigated water samples may have a wide range of ages, and for waters with very low values of 14 C, the model based on statistics may give more reliable age estimates than those obtained from single-sample-based models. In the extended Gonfiantini & Zuppi model, a representative system-wide value of the initial 14 C content is derived from the 14 C and δ 13 C data of DIC and can differ from that used in single-sample-based models. Therefore, the extended Gonfiantini & Zuppi model usually avoids the effect of modern water components which might retain ‘bomb’ pulse signatures. The geochemical mass-balance approach constructs an adjustment model that accounts for all the geochemical reactions known to occur along an aquifer flow path (Plummer et al., 1983; Wigley et al., 1978; Plummer et al., 1994; Plummer and Glynn, 2013), and includes, in addition to DIC, dissolved organic carbon (DOC) and methane (CH 4 ). If sufficient chemical, mineralogical and isotopic data are available, the geochemical mass-balance method can yield the most accurate estimates of the adjusted radiocarbon age. The main limitation of this approach is that complete information is necessary on chemical, mineralogical and isotopic data and these data are often limited. Failure to recognize the limitations and underlying assumptions on which the various models and approaches are based can result in a wide range of estimates of 14 C 0 and limit the usefulness of radiocarbon as a dating tool for groundwater. In each of the three generalized approaches (single-sample-based models, statistical approach, and geochemical mass-balance approach), successful application depends on scrutiny of the isotopic ( 14 C and 13 C) and chemical data to conceptualize the reactions and processes that affect the 14 C content of DIC in aquifers. The recently developed graphical analysis method is shown to aid in determining which approach is most appropriate for the isotopic and chemical data from a groundwater system.

Earth-Science Reviews↗

USGS2014

Identifying sources of aeolian mineral dust: Present and past

Aeolian mineral dust is an important component of the Earth’s environmental systems, playing roles in the planetary radiation balance, as a source of fertilizer for biota in both terrestrial and marine realms and as an archive for understanding atmospheric circulation and paleoclimate in the geologic past. Crucial to understanding all of these roles of dust is the identification of dust sources. Here we review the methods used to identify dust sources active at present and in the past. Contemporary dust sources, produced by both glaciogenic and non-glaciogenic processes, can be readily identified by the use of Earth-orbiting satellites. These data show that present dust sources are concentrated in a global dust belt that encompasses large topographic basins in low-latitude arid and semiarid regions. Geomorphic studies indicate that specific point sources for dust in this zone include dry or ephemeral lakes, intermittent stream courses, dune fields, and some bedrock surfaces. Back-trajectory analyses are also used to identify dust sources, through modeling of wind fields and the movement of air parcels over periods of several days. Identification of dust sources from the past requires novel approaches that are part of the geologic toolbox of provenance studies. Identification of most dust sources of the past requires the use of physical, mineralogical, geochemical, and isotopic analyses of dust deposits. Physical properties include systematic spatial changes in dust deposit thickness and particle size away from a source. Mineralogy and geochemistry can pinpoint dust sources by clay mineral ratios and Sc-Th-La abundances, respectively. The most commonly used isotopic methods utilize isotopes of Nd, Sr, and Pb and have been applied extensively in dust archives of deep-sea cores, ice cores, and loess. All these methods have shown that dust sources have changed over time, with far more abundant dust supplies existing during glacial periods. Greater dust supplies in glacial periods are likely due to greater production of glaciogenic dust particles from expanded ice sheets and mountain glaciers, but could also include dust inputs from exposed continental and insular shelves now submerged. Future dust sources are difficult to assess, but will likely differ from those of the present because of global warming. Global warming could bring about shifts in dust sources by changes in degree or type of vegetation cover, changes in wind strength, and increases or decreases in the size of water bodies. A major uncertainty in assessing dust sources of the future is related to changes inhuman land use, which could affect land surface cover, particularly due to increased agricultural endeavors and water usage.

Book chapter↗

USGS1985

Remote sensing; a geophysical perspective

In this review of developments in the field of remote sensing from a geophysical perspective, the subject is limited to the electromagnetic spectrum from 0.4 mu m to 25 cm. Three broad energy categories are covered: solar reflected, thermal infrared, and microwave.The reflected solar region has been the most intensely studied. Photointerpretation of images from individual spectral bands or from color composites remains the most widely used method of analysis. New instrumentation and digital processing, based on analysis of laboratory and field spectra, provide significant advances that are beginning to be applied to resource exploration. Color compositing techniques have been effectively used to detect the characteristic spectral reflectance features of iron oxides and hydroxyl-bearing materials in satellite multispectral data for mapping areas of hydrothermal alteration. Airborne spectrometers can now detect individual spectral features of many minerals which are diagnostic of different stages of hydrothermal alteration. Evolution was from discrimination, based on empirical experience, to mineralogic identification and leading to quantification. Current developments also indicate new, promising extensions to vegetated terrains.Advances in thermal infrared studies are due to development of thermal models that permit mapping of physical property variations and to detection of spectral differences that provide important compositional information. Analysis techniques are still in their infancy, and thermal satellite data remain appropriate only for regional investigations.Microwave data have been acquired mainly with radar systems, which can provide very high resolution from space, but use of textural and slope information has had limited application. Long-wavelength radiation has been shown to penetrate dry materials, and this may be applicable in extremely arid regions.

Geophysics↗

USGS2013

The stability of sulfate and hydrated sulfate minerals near ambient conditions and their significance in environmental and planetary sciences

Sulfate and hydrated sulfate minerals are abundant and ubiquitous on the surface of the Earth and also on other planets and their satellites. The humidity-buffer technique has been applied to study the stability of some of these minerals at 0.1 MPa in terms of temperature-relative humidity space on the basis of hydration-dehydration reversal experiments. Updated phase relations in the binary system MgSO 4 -H 2 O are presented, as an example, to show how reliable thermodynamic data for these minerals could be obtained based on these experimental results and thermodynamic principles. This approach has been applied to sulfate and hydrated sulfate minerals of other metals, including Fe (both ferrous and ferric), Zn, Ni, Co, Cd, and Cu. Metal-sulfate salts play important roles in the cycling of metals and sulfate in terrestrial systems, and the number of phases extends well beyond the simple sulfate salts that have thus far been investigated experimentally. The oxidation of sulfide minerals, particularly pyrite, is a common process that initiates the formation of efflorescent metal-sulfate minerals. Also, the overall abundance of iron-bearing sulfate salts in nature reflects the fact that the weathering of pyrite or pyrrhotite is the ultimate source for many of these phases. Many aspects of their environmental significance are reviewed, particularly in acute effects to aquatic ecosystems related to the dissolution of sulfate salts during rain storms or snow-melt events. Hydrous Mg, Ca, and Fe sulfates were identified on Mars, with wide distribution and very large quantities at many locations, on the basis of spectroscopic observations from orbital remote sensing and surface explorations by rovers. However, many of these findings do not reveal the detailed information on the degree of hydration that is essential for rigorous interpretation of the hydrologic history of Mars. Laboratory experiments on stability fields, reactions pathways, and reaction rates of hydrous sulfates likely to be found on Mars enhance our understanding of the degrees of hydration of various sulfates that should currently exist on Mars at various seasons and locations and during various atmospheric pressure and obliquity periods. Two sets of systematic experiments were described; one on hydrous Mg sulfates and the other on hydrous Fe 3+ sulfates. Also, their implications to Mars sulfates mineralogy were discussed.

Journal of Asian Earth Sciences↗

USGS2016

ChemCam activities and discoveries during the nominal mission of the Mars Science Laboratory in Gale crater, Mars

At Gale crater, Mars, ChemCam acquired its first laser-induced breakdown spectroscopy (LIBS) target on Sol 13 of the landed portion of the mission (a Sol is a Mars day). Up to Sol 800, more than 188 000 LIBS spectra were acquired on more than 5800 points distributed over about 650 individual targets. We present a comprehensive review of ChemCam scientific accomplishments during that period, together with a focus on the lessons learned from the first use of LIBS in space. For data processing, we describe new tools that had to be developed to account for the uniqueness of Mars data. With regard to chemistry, we present a summary of the composition range measured on Mars for major-element oxides (SiO 2 , TiO 2 , Al 2 O 3 , FeO T , MgO, CaO, Na 2 O, K 2 O) based on various multivariate models, with associated precisions. ChemCam also observed H, and the non-metallic elements C, O, P, and S, which are usually difficult to quantify with LIBS. F and Cl are observed through their molecular lines. We discuss the most relevant LIBS lines for detection of minor and trace elements (Li, Rb, Sr, Ba, Cr, Mn, Ni, and Zn). These results were obtained thanks to comprehensive ground reference datasets, which are set to mimic the expected mineralogy and chemistry on Mars. With regard to the first use of LIBS in space, we analyze and quantify, often for the first time, each of the advantages of using stand-off LIBS in space: no sample preparation, analysis within its petrological context, dust removal, sub-millimeter scale investigation, multi-point analysis, the ability to carry out statistical surveys and whole-rock analyses, and rapid data acquisition. We conclude with a discussion of ChemCam performance to survey the geochemistry of Mars, and its valuable support of decisions about selecting where and whether to make observations with more time and resource-intensive tools in the rover's instrument suite. In the end, we present a bird's-eye view of the many scientific results: discovery of felsic Noachian crust, first observation of hydrated soil, discovery of manganese-rich coatings and fracture fills indicating strong oxidation potential in Mars' early atmosphere, characterization of soils by grain size, and wide scale mapping of sedimentary strata, conglomerates, and diagenetic materials.

Journal of Analytical Atomic Spectrometry↗

USGS2017

Formation of Fe-Mn crusts within a continental margin environment

This study examines Fe-Mn crusts that form on seamounts along the California continental-margin (CCM), within the United States 200 nautical mile exclusive economic zone. The study area extends from approximately 30° to 38° North latitudes and from 117° to 126° West longitudes. The area of study is a tectonically active northeast Pacific plate boundary region and is also part of the North Pacific Subtropical Gyre with currents dominated by the California Current System. Upwelling of nutrient-rich water results in high primary productivity that produces a pronounced oxygen minimum zone. Hydrogenetic Fe-Mn crusts forming along the CCM show distinct chemical and mineral compositions compared to open-ocean crusts. On average, CCM crusts contain more Fe relative to Mn than open-ocean Pacific crusts. The continental shelf and slope release both Fe and Mn under low-oxygen conditions. Silica is also enriched relative to Al compared to open-ocean crusts. This is due to the North Pacific silica plume and enrichment of Si along the path of deep-water circulation, resulting in Si enrichment in bottom and intermediate waters of the eastern Pacific. The CCM Fe-Mn crusts have a higher percentage of birnessite than open-ocean crusts, reflecting lower dissolved seawater oxygen that results from the intense coastal upwelling and proximity to zones of continental slope pore-water anoxia. Carbonate fluorapatite (CFA) is not present and CCM crusts do not show evidence of phosphatization, even in the older sections. The mineralogy indicates a suboxic environment under which birnessite forms, but in which pH is not high enough to facilitate CFA deposition. Growth rates of CCM crusts generally increase with increasing water depth, likely due to deep-water Fe sources mobilized from reduced shelf and slope sediments. Many elements of economic interest including Mn, Co, Ni, Cu, W, and Te have slightly or significantly lower concentrations in CCM crusts relative to crusts from the Pacific Prime Crust Zone and other open-ocean basins. However, concentrations of total rare earth elements and yttrium average only slightly lower contents and in the future may be a strategic resource for the U.S.

California↗

USGS2007

Loess sedimentation in Tibet: provenance, processes, and link with Quaternary glaciations

Well-preserved loess deposits are found on the foothills of mountains along the middle reaches of the Yarlung Zangbo River in southern Tibet. Optically stimulated luminescence (OSL) dating is used to determine loess ages by applying the single-aliquot regeneration technique. Geochemical, mineralogical, and granulometric measurements were carried out to allow a comparison between loess from Tibet and the Chinese Loess Plateau. Our results demonstrate that (i) the loess deposits have a basal age of 13-11 ka, suggesting they accumulated after the last deglaciation, (ii) loess in southern Tibet has a "glacial" origin, resulting from eolian sorting of glaciofluvial outwash deposits from braided river channels or alluvial fans by local near-surface winds, and (iii) the present loess in the interior of Tibet has accumulated since the last deglaciation when increased monsoonal circulation provided an increased vegetation cover that was sufficient for trapping eolian silt. The lack of full-glacial loess is either due to minimal vegetation cover or possibly due to the erosion of loess as glaciofluvial outwash during the beginning of each interglacial. Such processes would have been repeated during each glacial-interglacial cycle of the Quaternary. ?? 2007 Elsevier Ltd. All rights reserved.

Quaternary Science Reviews↗

USGS2021

The Mars 2020 Perseverance rover mast camera zoom (Mastcam-Z) multispectral, stereoscopic imaging investigation

Mastcam-Z is a multispectral, stereoscopic imaging investigation on the Mars 2020 mission’s Perseverance rover. Mastcam-Z consists of a pair of focusable, 4:1 zoomable cameras that provide broadband red/green/blue and narrowband 400-1000 nm color imaging with fields of view from 25.6° × 19.2° (26 mm focal length at 283 μrad/pixel) to 6.2° × 4.6° (110 mm focal length at 67.4 μrad/pixel). The cameras can resolve (≥ 5 pixels) ∼0.7 mm features at 2 m and ∼3.3 cm features at 100 m distance. Mastcam-Z shares significant heritage with the Mastcam instruments on the Mars Science Laboratory Curiosity rover. Each Mastcam-Z camera consists of zoom, focus, and filter wheel mechanisms and a 1648 × 1214 pixel charge-coupled device detector and electronics. The two Mastcam-Z cameras are mounted with a 24.4 cm stereo baseline and 2.3° total toe-in on a camera plate ∼2 m above the surface on the rover’s Remote Sensing Mast, which provides azimuth and elevation actuation. A separate digital electronics assembly inside the rover provides power, data processing and storage, and the interface to the rover computer. Primary and secondary Mastcam-Z calibration targets mounted on the rover top deck enable tactical reflectance calibration. Mastcam-Z multispectral, stereo, and panoramic images will be used to provide detailed morphology, topography, and geologic context along the rover’s traverse; constrain mineralogic, photometric, and physical properties of surface materials; monitor and characterize atmospheric and astronomical phenomena; and document the rover’s sample extraction and caching locations. Mastcam-Z images will also provide key engineering information to support sample selection and other rover driving and tool/instrument operations decisions.

Space Science Reviews↗

USGS1951

Summary of the research work of the Trace Elements Section, Geochemistry and Petrology Branch, for the period April 1, 1948-December 31, 1950

This report summarizes the research work of the Trace Elements Section, Geochemistry and Petrology Branch, from the organization of the Section in April 1948 to December 31, 1950. The research undertaken thus far consists of laboratory and related field studies in the following fields: 1. Mineralogic and petrologic investigations of radioactive rocks, minerals, and ores. 2. Investigations of chemical methods of analysis for uranium, thorium, and other elements and compounds in radioactive materials, and related chemical problems. 3. Investigations of spectrographic methods of analysis for a wide variety of elements in radioactive materials. 4. Investigations of radiometric methods of analysis as applied to radioactive materials. It should be emphasized that the work undertaken thus far, described under the headings "Future work", is almost entirely in the nature of investigations supporting the field appraisal of known important uraniferous deposits. A comprehensive program of more fundamental research was submitted in April 1949 in a report entitled "Proposed program of desirable research in the geochemistry of uranium," but funds for this work have not been authorized. It is hoped, however, that funds to support basic research of the type indicated in that report may be available in the future. This report does not cover the analytical work of the Section nor the public-sample program. The analytical work has been summarized for the fiscal year 1950 in the report, "Numerical summary of the analytical work of the Trace Elements Section, Geochemistry and Petrology Branch, for the fiscal year 1950," by John C. Rabbit, U.S. Geol. Survey Trace Elements Memorandum Rept. 174, October 1950. A report on the public-sample program is in preparation. Much of the material in this report has been paraphrased from reports prepared by members of the Section. My special thanks are due them; to Earl Ingerson, chief of the Geochemistry and Petrology Branch of the Survey, for his critical review; to my secretary, Marie Woolihan, for her aid in collecting material; and to Virginia Layne of the editorial staff of the Section for typing the manuscript and the multilith mats.

Trace Elements Investigations↗

USGS2003

Modern, Sangamon and Yarmouth soil development in loess of unglaciated southwestern Illinois

The Thebes Section in unglaciated southwestern Illinois contains a well preserved ??? 500 kyr loess-paleosol sequence with four loesses and three interglacial soils. Various magnetic, mineralogical, and elemental properties were analyzed and compared over the thickness of soil sola. These proxies for soil] development intensity have the following trend: Yarmouth Geosol > Sangamon Geosol > modern soil. Quartz/plagioclase, Zr/Sr, and TiO2/Na2O ratios were most sensitive to weathering. Frequency dependent magnetic susceptibility and anhysteretic remanent magnetization, greatest in A horizons, also correspond well with soil development intensity. Neoformed mixed-layered kaolinite/expandables, suggestive of a warm/humid climate, were detected in the Sangamon and Yarmouth soil sola. Clay illuviation in soils was among the least sensitive indicators of soil development. Differences in properties among interglacial soils are interpreted to primarily reflect soil development duration, with climatic effects being secondary. Assuming logarithmic decreases in weathering rates, the observed weathering in the Sangamon Geosol is consistent with 50 kyr of interglacial weathering (Oxygen Isotope Stage 5) compared to 10 kyr for the modern soil (Oxygen Isotope Stage 1). We propose that the Yarmouth Geosol in the central Midwest formed over 180 kyr of interglacial weathering (including oxygen isotope stages 7, 9, and 11). ?? 2002 Elsevier Science Ltd. All rights reserved.

Quaternary Science Reviews↗

USGS2018

Geochemistry and microbiology of groundwater and solids from extraction and monitoring wells and their relation to well efficiency at a Federally operated confined disposal facility, East Chicago, Indiana

In cooperation with the U.S. Army Corps of Engineers, Chicago District, the U.S. Geological Survey investigated the processes affecting water quality, geochemistry, and microbiology in representative extraction and monitoring wells at a confined disposal facility (CDF) in East Chicago, Indiana. The CDF is a 140-acre Federally-managed facility that was the former location of an oil refinery and is now used for the long-term disposal and storage of dredge material from the Indiana Harbor and Indiana Harbor Canal. Residual petroleum hydrocarbons and leachate from the CDF are contained within the facility by use of a groundwater cutoff wall. The wall consists of a soil-bentonite slurry and a gradient control system made up of an automated network of 96 extraction wells, 42 monitoring wells, and 2 ultrasonic sensors that maintain an inward hydraulic gradient at the site. The pumps in the extraction wells require vigilant maintenance and must be replaced when unable to withdraw water at a rate sufficient to maintain the required inward gradient. The wells are screened in the Calumet aquifer, a coarse-grained sand and gravel unit that extends approximately 35 feet below the land surface and is not utilized for drinking-water supply at the CDF or in the surrounding area. This study was initiated to identify the cause of decreased pump discharges and to identify potential mitigation strategies. For this study, the U.S. Geological Survey collected groundwater and solids from monitoring and extraction wells. Groundwater samples were collected during June 2014 for precautionary health screening and on four occasions during September 2014 through November 2014. Groundwater samples collected from two extraction wells during June 2014 were analyzed for concentrations of anthropogenic organic constituents. During September through November 2014, groundwater samples were collected from one additional extraction well, and samples from three monitoring wells were analyzed for concentrations of inorganic and organic constituents, dissolved gases, and bacterial abundance and diversity. Solid samples were collected during April 2014, during September 2014 through November 2014, and during November 2016. Solid samples were collected from the exterior of extraction-well pumps and as flocculent from water samples. Solid samples were collected from 10 wells, including 1 extraction well and 3 monitoring wells sampled for water quality. Solid samples were analyzed for mineralogy, solid-phase habit, geochemistry, and organic composition. The following is a list of observations that were made during this study: (1) the water quality is substantially variable among the six well locations sampled as part of this study—lower (more negative) redox values and higher concentrations of many constituents (including calcium, magnesium, sodium, and sulfate) and properties (including dissolved solids, hardness, and turbidity) were detected in sampled wells located near the extraction wells with the highest frequency of failure; (2) water-level drawdown is variable between extraction wells—wells with the greatest drawdown may pull deeper groundwater into the borehole; (3) dissolved gas results indicate reducing oxidation-reduction processes in the aquifer material that can feasibly contribute iron, carbon dioxide, and other byproducts from hydrocarbon degradation to precipitates and solids that accumulate on and impair pump operation; (4) crystalline and amorphous solid-phase minerals are precipitating in the borehole; (5) several types of bacteria are present in water pumped from extraction wells and are likely responsible for bonding mineral and microbiologic matter to the pump (and other well components); and (6) bacteria may create microenvironments that facilitate precipitation of solids or inhibit dissolution of unstable minerals once the bacteria adhere to biofilm attached to the pump. Results of the study indicate that bacteria may be accumulating and entrapping solid material on the exterior of pumps. This accumulation reduces heat transfer and water discharge from the pump and may lead to decreased efficiency or mechanical failure. Observations could not be made on the well screen, gravel pack, or surrounding geologic formation; therefore, mitigating measures in the borehole may not solve well-productivity issues. Remedies for the pump fouling problems were derived from the review and interpretation of data collected during this study and from information documented in other sources about groundwater well fouling. Potential remedies to problems associated with pump fouling at the CDF may include the following: (1) reducing attractiveness of the extraction wells for microbiological growth by modifying the chemical or physical environment of the well, (2) modifying the pump exterior to decrease microbiological adherence, (3) changing the pumping regime to control the chemistry of water entering the well from the surrounding aquifer material, (4) modifying the pumps to be less physically and thermally attractive, and (5) removing hydrocarbons from groundwater and the aquifer material surrounding the wells or adding surfactants to make them more mobile. Pilot scale testing may be necessary to identify the most effective treatment or combination of treatments.

Indiana↗

USGS1968

The geologic classification of the meteorites

The meteorite classes of Prior and Mason are assigned to three proposed genetic groups on the basis of a combination of compositional, mineralogical, and elemental characteristics: l) the calcium-poor, volatile-rich carbonaceous chondrites and achondrites; 2) the calcium-poor, volatile-poor chondrites (enstatite, bronzite, hypersthene, and pigeonite), achondrites (enstatite, hypersthene, and pigeonite), stonyirons (pallasites, siderophyre), and irons; and, 3) the calcium-rich (basaltic) achondrites. Chondrites are correlated with calcium-poor achondrites and the silicate phase of the pallasitic meteorites on Fe contents of olivine and pyroxene; and with metal of the stony-irons and irons on the basis of trace elements (Ga and Ge). Transitions in structure and texture between the chondrites and achondrites are recognized. The Van Schmus-Wood chemical-petrologic classification of the chondrites has been modified and expanded to a mineralogic-petrologic classification of the chondrites and calcium-poor achondrites. Chondrites apparently are the first rocks of the solar system. Paragenetic and textural relations in the Murray carbonaceous chondrite shed new light on the manner of accretion, and on the character of dispersed solid materials ('dust', and chondrules and metal) that existed in the solar system before accretion. Two pre-accretionary mineral assemblages (components) are recognized in the carbonaceous chondrites and in the unequilibrated volatile-poor chondrites. They are: 1) a 'low temperature' water-, rare gas-, and carbon-bearing component; and, 2) a high temperature anhydrous silicate and metal component. Paragenetic relations indicate that component 2 materials predate chondrite formation. An accretionary assemblage (component 3) also is recognized in the carbonaceous chondrites and in the unequilibrated volatile-poor chondrites. Component 3 consists of very fine grains of olivine and pyroxene, which occur as pervasive disseminations, as small irregular aggregates of grains, and as large subround to round, finely granular accretional chondrules. Evidence in Murray indicates that component 3 silicates precipitated abruptly and at low pressures, possibly from a high temperature gas, in an environment that contained dispersed component 1 and 2 materials. All component 3 aggregates in Murray contain component 1 material, most commonly as flakes, and locally as tiny granules and larger spherules, some of which are hollow and some of which were broken prior to their mechanical incorporation in accretionary chondrules. Accretion may have occurred as ices associated with dispersed water-bearing component 1 materials temporarily melted during the precipitation of component 3 silicates, and then abruptly refroze to form an icy cementing material. Group 1 materials may be cometary, and group 2 materials may be asteroidal. Schematic models are proposed. Evidence is reviewed for the lunar origin of the pyroxeneplagioclase achondrites. On the basis of natural remanent magnetism, it is suggested that the very scarce diopside-olivine achondrites may be samples from Mars. A classification of the meteorite breccias, including the calcium-poor and calcium-rich mesosiderites, and irons that contain silicate fragments, is proposed. A fragmentation history of the meteorites is outlined on the basis of evidence in the polymict breccias, and from gas retention ages in stones and exposure ages in irons. Cometal impacts appear to have caused the initial fragmentation, stud possibly the perturbation of orbits, of two inferred asteroidal bodies (enstatite and bronzite), one and possibly both events occurring before 2000 m.y. ago. Several impacts apparently occurred on the inferred hypersthene body in the interval 1000 to 2000 m.y. ago. Major breakups of the three bodies apparently occurred as the result of interasteroidal collisions at about 900 m.y. ago, and 600 to 700 m.y. ago. The breakups were followed by a number of fr

Open-File Report↗

USGS2010

The role of African dust in the formation of Quaternary soils on Mallorca, Spain and implications for the genesis of Red Mediterranean soils

African dust additions explain the origin of terra rossa soils that are common on the carbonate-platform island of Mallorca, Spain. Mineralogical and geochemical analyses indicate that Quaternary carbonate eolianites on Mallorca have a very high purity, usually composed of more than 90% carbonate minerals (calcite, dolomite, and aragonite). In contrast, terra rossa soils developed on these eolianites have lower carbonate contents and contain higher concentrations of quartz and other silicates. Analyses of immobile trace elements indicate that the non-carbonate fractions of the eolianites have distinctive Zr/Hf, La/Yb, Cr/Sc and Th/Ta values that differ from the superjacent terra rossa soils. These observations indicate that even if sufficient dissolution of the eolianite had taken place to create the soils by residual accumulation, immobile element ratios in the soils require an external source. However, Zr/Hf, La/Yb, Cr/Sc and Th/Ta values in the soils fall within the range of values for these element ratios in African dust collected on Barbados and mainland Spain. We conclude that the silicate fractions of terra rossa soils on Mallorca are derived mainly, though not wholly, from far-traveled African dust, and this process may explain the origin of other terra rossa soils found in southern Europe. ?? 2010.

Quaternary Science Reviews↗

USGS2004

Stratiform barite deposits in the Roberts Mountains allochthon, Nevada: A review of potential analogs in modern sea-floor environments

The United States is a net importer of barite, a critical mineral for the oil and gas industry; more than 80 percent of current domestic consumption of barite is imported from China. Nearly all of the domestic production of barite comes from stratiform deposits in Nevada. The 'modern analogs' approach adopted in this review can contribute to improving deposit models and the long-term resource picture in the United States. Massive barite deposits in Nevada are interlayered with deep-water siliceous sedimentary strata of Paleozoic age within the Roberts Mountains Allochthon. Although the barite deposits formed along the long-lived, tectonically active margin of western North America before the Antler orogeny, uncertainty still exists regarding key aspects of their genesis, especially with respect to tectonic setting and depositional processes. Proposed tectonic settings include a continental slope adjacent to an ocean basin, and a rifted basin formed on continental crust. A margin dominated by other stress configurations and strike-slip faulting may also have been present during the Paleozoic. Hypotheses for the genesis of sediment-hosted, stratiform barite deposits in Nevada can be grouped into two categories: (1) a synsedimentary hydrothermal model and (2) an ocean-circulation/productivity-zone model. Both models include a stage involving bacterial reduction of seawater sulfate. Disseminated, diagenetic, and hydrothermal barite deposits are widespread features of the modern ocean. In the Pacific Ocean, disseminated barite deposits (max 9 weight percent BaSO4) are forming below high-productivity zones (for example, in equatorial belts) and on the flanks of ocean ridges (as fallout of 'black smoker' particles). Massive barite deposits of diagenetic (in the subsea floor and at cold seeps) and hydrothermal origins are present in several sediment-covered tectonic settings, including ocean ridges (Escanaba Trough and Guaymas Basin), oceanic transform faults (Blanco Fracture Zone), marginal basins (Sea of Okhotsk), convergent margins (Peru, Oregon, Alaska), and transform margins (California Continental Borderland). Both hydrothermal and diagenetic barite deposits may be present in some environments (for example, the California California Borderland). On the basis of a consideration of tectonic settings and a comparison of deposit attributes (associated rock types, size, structure), mineralogy (BaSO4 content, SiO2 content), and geochemistry (S- and Sr-isotopic ratios) for modern and ancient massive barite deposits, cold seeps along transform margins (or, possibly, marginal basins) represent the most promising present-day metallogenetic analogs for stratiform barite. Hydrothermal systems can also produce high-grade barite, but the ubiquity of associated sulfide mineralization on the modern sea floor (and the paucity of sulfides in Nevada deposits) is problematic. On the basis of data from modern barite deposits, the presence of vent-specific faunas (tubeworms) and the variation in d34S values for barite (related to bacterial reduction of seawater sulfate) may not permit discrimination between a diagenetic or hydrothermal origin for ancient barite deposits.

Nevada↗

USGS2025

Solution-collapse breccia pipe uranium deposits of the southern Colorado Plateau, northwestern Arizona, USA

Some of the highest-grade uranium deposits in the United States occur in breccia pipes that formed by solution and collapse of sedimentary strata, which occur in the southern portion of the Colorado Plateau in northwestern Arizona. The host breccia pipes are up to 1200 m in vertical extent, average about 90 m in diameter, and can cross-cut strata from their base in the Mississippian Redwall Limestone to as stratigraphically high on some plateaus as the Triassic Chinle Formation. These uranium-base metal deposits are up to 600 m thick and formed within the breccia pipes where they transect the Permian Coconino Sandstone, Hermit Formation, and the Esplanade Sandstone. Of the hundreds of breccia pipes identified across this region, only a small percentage are known to contain mineralization. The main uranium ore mineral is uraninite that is intergrown with at least 20 base-metal sulfide minerals, which contribute Fe, Cu, Co, As, Pb, Zn, Ni, and Ag to the deposits. This study considered regional stratigraphy, sulfur isotope systematics, mineralogy, in situ dating, and compilation and analysis of previous work on the deposits. A comprehensive deposit model has not been published for these deposits. This analysis identified new additions to update the deposit model for these unusual, possibly unique deposits. Proposed modifications to the model include: (1) the source, mechanisms, timing of the base-metal sulfide mineral assemblages, and (2) the source, mechanism, and timing of the uranium mineralization. Sulfide and uranium deposition are shown to be separate mineralization events. The study proposes the possible role of gypsum as a source of sulfur for the sulfide minerals in the deposits. Groundwaters carrying uranium encountered the preexisting sulfides in breccia pipes, reducing the uranyl ions, and precipitating U oxide (as uraninite). Analysis of the regional stratigraphy recognized that numerous beds of gypsum are in the strata that lie only tens of meters above the breccia pipe deposits. In the breccia pipe region, if these stratigraphic units (Toroweap and Kaibab Formations) do not contain gypsum layers then the underlying pipes are not mineralized; where these Permian gypsum layers do occur, breccia pipes can host mineralization. This new understanding should be useful in identifying the prospective region for mineralized pipes.

Arizona↗

USGS2012

Surface properties of the Mars Science Laboratory candidate landing sites: characterization from orbit and predictions

This work describes the interpretation of THEMIS-derived thermal inertia data at the Eberswalde, Gale, Holden, and Mawrth Vallis Mars Science Laboratory (MSL) candidate landing sites and determines how thermophysical variations correspond to morphology and, when apparent, mineralogical diversity. At Eberswalde, the proportion of likely unconsolidated material relative to exposed bedrock or highly indurated surfaces controls the thermal inertia of a given region. At Gale, the majority of the landing site region has a moderate thermal inertia (250 to 410 J m -2 K -1 s -1/2 ), which is likely an indurated surface mixed with unconsolidated materials. The primary difference between higher and moderate thermal inertia surfaces may be due to the amount of mantling material present. Within the mound of stratified material in Gale, layers are distinguished in the thermal inertia data; the MSL rover could be traversing through materials that are both thermophysically and compositionally diverse. The majority of the Holden ellipse has a thermal inertia of 340 to 475 J m -2 K -1 s -1/2 and consists of bed forms with some consolidated material intermixed. Mawrth Vallis has a mean thermal inertia of 310 J m -2 K -1 s -1/2 and a wide variety of materials is present contributing to the moderate thermal inertia surfaces, including a mixture of bedrock, indurated surfaces, bed forms, and unconsolidated fines. Phyllosilicates have been identified at all four candidate landing sites, and these clay-bearing units typically have a similar thermal inertia value (400 to 500 J m -2 K -1 s -1/2 ), suggesting physical properties that are also similar.

Space Science Reviews↗

USGS2026

Geochemical, mineralogical, and isotopic evidence for multi-stage genesis of the Hicks Dome REE + Y-HFSE-fluorite deposit, Illinois, USA

Hicks Dome hosts breccias enriched in rare earth elements (REE), Y, Th, F, Ba, Ti, Nb, and Be, alongside spatially associated lamprophyre dikes (ca. 271 Ma). Hicks Dome is located within the Illinois–Kentucky Fluorspar District, which hosts fluorite, Pb–Zn, and barite resources. This study investigates the genetic relationships between Hicks Dome mineralization in breccias, alkaline magmatism, and Illinois–Kentucky Fluorspar District mineralization. Lamprophyre dikes are light REE–enriched with chondrite-normalized abundances decreasing from La to Lu. The Host Breccia exhibits middle and heavy REE–enriched patterns that mirror those of the principal REE–Th host minerals, including fluorapatite, xenotime, and thorite. Textural evidence suggests recrystallization of phosphates, sulfates, and Ti–Nb oxides in the Host Breccia. U–Pb geochronology constrains multiple mineralizing events, with ages of 277 ± 18 Ma from low-Th apatite interpreted as main-stage mineralization, and 121.6 ± 9.7 Ma from high-Th apatite indicating later overprinting. O–H–C stable isotope data provide evidence for multiple stages of fluid-rock interaction and fluid mixing: (1) early magmatic fluids dissolved limestone country rock, (2) mixing between magmatic fluids and basinal brines led to main-stage mineralization in the Host Breccia, and (3) late-stage mineralization occurred following mixing of meteoric water and basinal brine. These results indicate that heavy REEs, high field strength elements, and fluorine precipitated proximal to its alkaline magmatic source because of fluid–rock interactions and fluid mixing. Subsequent fluid mixing drove late-stage recrystallization and additional fluorite formation, a process that may be similar to mineralization in the Illinois-Kentucky Fluorspar District.

Illinois↗

USGS2017

Fractional crystallization-induced variations in sulfides from the Noril’sk-Talnakh mining district (polar Siberia, Russia)

The distribution of platinum-group elements (PGE) within zoned magmatic ore bodies has been extensively studied and appears to be controlled by the partitioning behavior of the PGE during fractional crystallization of magmatic sulfide liquids. However, other chalcophile elements, especially TABS (Te, As, Bi, Sb, and Sn) have been neglected despite their critical role in forming platinum-group minerals (PGM). TABS are volatile trace elements that are considered to be mobile so investigating their primary distribution may be challenging in magmatic ore bodies that have been somewhat altered. Magmatic sulfide ore bodies from the Noril’sk-Talnakh mining district (polar Siberia, Russia) offer an exceptional opportunity to investigate the behavior of TABS during fractional crystallization of sulfide liquids and PGM formation as the primary features of the ore bodies have been relatively well preserved. In this study, new petrographic (2D and 3D) and whole-rock geochemical data from Cu-poor to Cu-rich sulfide ores of the Noril’sk-Talnakh mining district are integrated with published data to consider the role of fractional crystallization in generating mineralogical and geochemical variations across the different ore types (disseminated to massive). Despite textural variations in Cu-rich massive sulfides (lenses, veins, and breccias), these sulfides have similar chemical compositions, which suggests that Cu-rich veins and breccias formed from fractionated sulfide liquids that were injected into the surrounding rocks. Numerical modeling using the median disseminated sulfide composition as the initial sulfide liquid composition and recent DMSS/liq and DISS/liq predicts the compositional variations observed in the massive sulfides, especially in terms of Pt, Pd, and TABS. Therefore, distribution of these elements in the massive sulfides was likely controlled by their partitioning behavior during sulfide liquid fractional crystallization, prior to PGM formation. Our observations indicate that in the Cu-poor massive sulfides the PGM formed as the result of exsolution from sulfide minerals whereas in the Cu-rich massive sulfides the PGM formed by crystallization from late-stage fractionated sulfide liquids. We suggest that the significant amount of Sn-bearing PGM may be related to crustal contamination from granodiorite, whereas As, Bi, Te, and Sb were likely added to the magma along with S from sedimentary rocks. Large PGM that are scarce and randomly distributed may account for most of the whole-rock Pt budget. Based on our results, we propose a holistic genetic model for the formation of the magmatic sulfide ore bodies of the Noril’sk-Talnakh mining district.

Siberia↗