Geology Reports⌕ Search

SEARCH · Geology Reports

Results for “Nature, Scientific Data”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 883 records · Page 49Linked to original sources
USGS2004

Assessment of soil and water contaminants from selected locations in and near the Idaho Army National Guard Orchard Training Area, Ada County, Idaho, 2001-2003

In 2001, the National Guard Bureau and the U.S. Geological Survey began a project to compile hydrogeologic data and determine presence or absence of soil, surface-water, and ground-water contamination at the Idaho Army National Guard Orchard Training Area in southwestern Idaho. Between June 2002 and April 2003, a total of 114 soil, surface-water, ground-water, precipitation, or dust samples were collected from 68 sample sites (65 different locations) in the Orchard Training Area (OTA) or along the vehicle corridor to the OTA. Soil and water samples were analyzed for concentrations of selected total trace metals, major ions, nutrients, explosive compounds, semivolatile organics, and petroleum hydrocarbons. Water samples also were analyzed for concentrations of selected dissolved trace metals and major ions. Distinguishing naturally occurring large concentrations of trace metals, major ions, and nutrients from contamination related to land and water uses at the OTA was difficult. There were no historical analyses for this area to compare with modern data, and although samples were collected from 65 locations in and near the OTA, sampled areas represented only a small part of the complex OTA land-use areas and soil types. For naturally occurring compounds, several assumptions were made?anomalously large concentrations, when tied to known land uses, may indicate presence of contamination; naturally occurring concentrations cannot be separated from contamination concentrations in mid- and lower ranges of data; and smallest concentrations may represent the lowest naturally occurring range of concentrations and (or) the absence of contaminants related to land and water uses. Presence of explosive, semivolatile organic (SVOC), and petroleum hydrocarbon compounds in samples indicates contamination from land and water uses. In areas along the vehicle corridor and major access roads within the OTA, most trace metal, major ion, and nutrient concentrations in soil samples were not in the upper 10th percentile of data, but concentrations of 25 metals, ions, or nutrients were in the upper 10th percentile in a puddle sample near the heavy equipment maneuvering area, MPRC-H. The largest concentrations of tin, ammonia, and nitrite plus nitrate (as nitrogen) in water from the OTA were detected in a sample from this puddle. Petroleum hydrocarbons were the most common contaminant, detected in all soil and surface-water samples. An SVOC, bis (2-ethylhexyl) phthalate, a plasticizer, was detected at a site along the vehicle corridor. In Maneuver Areas within the OTA, many soil samples contained at least one trace metal, major ion, or nutrient in the upper 10th percentile of data, and the largest concentrations of cobalt, iron, mercury, titanium, sodium, ammonia, or total phosphorus were detected in 6 of 13 soil samples outside the Tadpole Lake area. The largest concentrations of aluminum, arsenic, beryllium, nickel, selenium, silver, strontium, thallium, vanadium, chloride, potassium, sulfate, and nitrite plus nitrate were detected in soil samples from the Tadpole Lake area. Water from Tadpole Lake contained the largest total concentrations of 19 trace metals, 4 major ions, and 1 nutrient. Petroleum hydrocarbons were detected in 5 soil samples and water from Tadpole Lake. SVOCs related to combustion of fuel or plasticizers were detected in 1 soil sample. Explosive compounds were detected in 1 precipitation sample.In the Impact Area within the OTA, most soil samples contained at least one trace metal, major ion, or nutrient in the upper 10th percentile of data, and the largest concentrations of barium, chromium, copper, manganese, lead, or orthophosphate were detected in 6 of the 18 soil samples. Petroleum hydrocarbons were detected in 4 soil samples, SVOCs in 6 samples, and explosive compounds in 4 samples. In the mobilization and training equipment site (MATES) compound adjacent to the OTA, all soil and water samples contained at lea

Scientific Investigations Report↗
USGS2023

Global dataset of soil organic carbon in tidal marshes

Tidal marshes store large amounts of organic carbon in their soils. Field data quantifying soil organic carbon (SOC) stocks provide an important resource for researchers, natural resource managers, and policy-makers working towards the protection, restoration, and valuation of these ecosystems. We collated a global dataset of tidal marsh soil organic carbon (MarSOC) from 99 studies that includes location, soil depth, site name, dry bulk density, SOC, and/or soil organic matter (SOM). The MarSOC dataset includes 17,454 data points from 2,329 unique locations, and 29 countries. We generated a general transfer function for the conversion of SOM to SOC. Using this data we estimated a median (± median absolute deviation) value of 79.2 ± 38.1 Mg SOC ha −1 in the top 30 cm and 231 ± 134 Mg SOC ha −1 in the top 1 m of tidal marsh soils globally. This data can serve as a basis for future work, and may contribute to incorporation of tidal marsh ecosystems into climate change mitigation and adaptation strategies and policies.

Scientific Data↗
USGS2016

Completion summary for boreholes TAN-2271 and TAN‑2272 at Test Area North, Idaho National Laboratory, Idaho

In 2015, the U.S. Geological Survey, in cooperation with the U.S. Department of Energy, drilled and constructed boreholes TAN-2271 and TAN-2272 for stratigraphic framework analyses and long-term groundwater monitoring of the eastern Snake River Plain aquifer at the Idaho National Laboratory in southeast Idaho. Borehole TAN-2271 initially was cored to collect continuous geologic data, and then re-drilled to complete construction as a monitor well. Borehole TAN-2272 was partially cored between 210 and 282 feet (ft) below land surface (BLS) then drilled and constructed as a monitor well. Boreholes TAN-2271 and TAN-2272 are separated by about 63 ft and have similar geologic layers and hydrologic characteristics based on geologic, geophysical, and aquifer test data collected. The final construction for boreholes TAN-2271 and TAN-2272 required 10-inch (in.) diameter carbon-steel well casing and 9.9-in. diameter open-hole completion below the casing to total depths of 282 and 287 ft BLS, respectively. Depth to water is measured near 228 ft BLS in both boreholes. Following construction and data collection, temporary submersible pumps and water-level access lines were placed to allow for aquifer testing, for collecting periodic water samples, and for measuring water levels. Borehole TAN-2271 was cored continuously, starting at the first basalt contact (about 33 ft BLS) to a depth of 284 ft BLS. Excluding surface sediment, recovery of basalt and sediment core at borehole TAN-2271 was better than 98 percent. Based on visual inspection of core and geophysical data, material examined from 33 to 211ft BLS primarily consists of two massive basalt flows that are about 78 and 50 ft in thickness and three sediment layers near 122, 197, and 201 ft BLS. Between 211 and 284 ft BLS, geophysical data and core material suggest a high occurrence of fractured and vesicular basalt. For the section of aquifer tested, there are two primary fractured aquifer intervals: the first between 235 and 255 ft BLS and the second between 272 and 282 ft BLS. Basalt texture for borehole TAN-2271 generally was described as aphanitic, phaneritic, and porphyritic. Sediment layers, starting near 122 ft BLS, generally were composed of fine-grained sand and silt with a lesser amount of clay. Basalt flows generally ranged in thickness from 2 to 78 ft and varied from highly fractured to dense with high to low vesiculation. Geophysical data and limited core material collected from TAN-2272 show similar lithologic sequences to those reported for TAN-2271. Geophysical and borehole video logs were collected during certain stages of the drilling and construction process at boreholes TAN-2271 and TAN-2272. Geophysical logs were examined synergistically with available core material to confirm geologic and hydrologic similarities and suggest possible fractured network interconnection between boreholes TAN-2271 and TAN-2272. Natural gamma log measurements were used to assess the completeness of the vapor port lines behind 10-in. diameter well casing. Electromagnetic flow meter results were used to identify downward flow conditions that exist for boreholes TAN-2271 and TAN-2272. Furthermore, gyroscopic deviation measurements were used to measure horizontal and vertical displacement at all depths in boreholes TAN-2271 and TAN-2272. After borehole construction was completed, single‑well aquifer tests were done within wells TAN-2271 and TAN ‑ 2272 to provide estimates of transmissivity and hydraulic conductivity. The transmissivity and hydraulic conductivity were estimated for the pumping well and observation well during the aquifer tests conducted on August 25 and August 27, 2015. Estimates for transmissivity range from 4.1 . 10 3 feet squared per day (ft 2 /d) to 8.1 . 10 3 ft 2 /d; estimates for hydraulic conductivity range from 5.8 to 11.5 feet per day (ft/d). Both TAN-2271 and TAN ‑ 2272 show sustained pumping rates of about 30 gallons per minute (gal/min) with measured drawdown in the pumping well of 1.96 ft and 1.14 ft, respectively. The transmissivity estimates for wells tested were within the range of values determined from previous aquifer tests in other wells near Test Area North. Groundwater samples were collected from both wells and were analyzed for cations, anions, metals, nutrients, volatile organic compounds, stable isotopes, and radionuclides. Groundwater samples for most of the inorganic constituents showed similar water chemistry in both wells. Groundwater samples for strontium-90, trichloroethene, and vinyl chloride exceeded maximum contaminant levels for public drinking water supplies in one or both wells.

Idaho↗
USGS2017

Simulation of daily streamflow for 12 river basins in western Iowa using the Precipitation-Runoff Modeling System

The U.S. Geological Survey, in cooperation with the Iowa Department of Natural Resources, constructed Precipitation-Runoff Modeling System models to estimate daily streamflow for 12 river basins in western Iowa that drain into the Missouri River. The Precipitation-Runoff Modeling System is a deterministic, distributed-parameter, physical-process-based modeling system developed to evaluate the response of streamflow and general drainage basin hydrology to various combinations of climate and land use. Calibration periods for each basin varied depending on the period of record available for daily mean streamflow measurements at U.S. Geological Survey streamflow-gaging stations. A geographic information system tool was used to delineate each basin and estimate initial values for model parameters based on basin physical and geographical features. A U.S. Geological Survey automatic calibration tool that uses a shuffled complex evolution algorithm was used for initial calibration, and then manual modifications were made to parameter values to complete the calibration of each basin model. The main objective of the calibration was to match daily discharge values of simulated streamflow to measured daily discharge values. The Precipitation-Runoff Modeling System model was calibrated at 42 sites located in the 12 river basins in western Iowa. The accuracy of the simulated daily streamflow values at the 42 calibration sites varied by river and by site. The models were satisfactory at 36 of the sites based on statistical results. Unsatisfactory performance at the six other sites can be attributed to several factors: (1) low flow, no flow, and flashy flow conditions in headwater subbasins having a small drainage area; (2) poor representation of the groundwater and storage components of flow within a basin; (3) lack of accounting for basin withdrawals and water use; and (4) limited availability and accuracy of meteorological input data. The Precipitation-Runoff Modeling System models of 12 river basins in western Iowa will provide water-resource managers with a consistent and documented method for estimating streamflow at ungaged sites and aid in environmental studies, hydraulic design, water management, and water-quality projects.

Iowa↗
USGS2007

Vertical gradients in water chemistry and age in the Northern High Plains Aquifer, Nebraska, 2003

The northern High Plains aquifer is the primary source of water used for domestic, industrial, and irrigation purposes in parts of Colorado, Kansas, Nebraska, South Dakota, and Wyoming. Despite the aquifer’s importance to the regional economy, fundamental ground-water characteristics, such as vertical gradients in water chemistry and age, remain poorly defined. As part of the U.S. Geological Survey’s National Water-Quality Assessment Program, water samples from nested, short-screen monitoring wells installed in the northern High Plains aquifer were analyzed for major ions, nutrients, trace elements, dissolved organic carbon, pesticides, stable and radioactive isotopes, dissolved gases, and other parameters to evaluate vertical gradients in water chemistry and age in the aquifer. Chemical data and tritium and radiocarbon ages show that water in the aquifer was chemically and temporally stratified in the study area, with a relatively thin zone of recently recharged water (less than 50 years) near the water table overlying a thicker zone of older water (1,800 to 15,600 radiocarbon years). In areas where irrigated agriculture was an important land use, the recently recharged ground water was characterized by elevated concentrations of major ions and nitrate and the detection of pesticide compounds. Below the zone of agricultural influence, major-ion concentrations exhibited small increases with depth and distance along flow paths because of rock/water interactions. The concentration increases were accounted for primarily by dissolved calcium, sodium, bicarbonate, sulfate, and silica. In general, the chemistry of ground water throughout the aquifer was of high quality. None of the approximately 90 chemical constituents analyzed in each sample exceeded primary drinking-water standards. Mass-balance models indicate that changes in groundwater chemistry along flow paths in the aquifer can be accounted for by small amounts of feldspar and calcite dissolution; goethite and clay-mineral precipitation; organic-carbon and pyrite oxidation; oxygen reduction and denitrification; and cation exchange. Mixing with surface water affected the chemistry of ground water in alluvial sediments of the Platte River Valley. Radiocarbon ages in the aquifer, adjusted for carbon mass transfers, ranged from 1,800 to 15,600 14C years before present. These results have important implications with respect to development of ground-water resources in the Sand Hills. Most of the water in the aquifer predates modern anthropogenic activity so excessive removal of water by pumping is not likely to be replenished by natural recharge in a meaningful timeframe. Vertical gradients in ground-water age were used to estimate long-term average recharge rates in the aquifer. In most areas, the recharge rates ranged from 0.02 to 0.05 foot per year. The recharge rate was 0.2 foot per year in one part of the aquifer characterized by large downward hydraulic gradients. Nitrite plus nitrate concentrations at the water table were 0.13 to 3.13 milligrams per liter as nitrogen, and concentrations substantially decreased with depth in the aquifer. Dissolved-gas and nitrogen-isotope data indicate that denitrification in the aquifer removed 0 to 97 percent (average = 50 percent) of the nitrate originally present in recharge. The average amount of nitrate removed by denitrification in the aquifer north of the Platte River (Sand Hills) was substantially greater than the amount removed south of the river (66 as opposed to 0 percent), and the extent of nitrate removal appears to be related to the presence of thick deposits of sediment on top of the Ogallala Group in the Sand Hills that contained electron donors, such as organic carbon and pyrite, to support denitrification. Apparent rates of dissolved-oxygen reduction and denitrification were estimated on the basis of decreases in dissolved-oxygen concentrations and increases in concentrations of excess nitrogen gas and ground-water ages along flow paths from the water table to deeper wells. Median rates of dissolved-oxygen reduction and denitrification south of the Platte River were at least 10 times smaller than the median rates north of the river in the Sand Hills. The relatively large denitrification rates in the Sand Hills indicate that the aquifer in that area may have a greater capacity to attenuate nitrate contamination than the aquifer south of the river, depending on rates of ground-water movement in the two areas. Small denitrification rates south of the river indicate that nitrate contamination in that part of the aquifer would likely persist for a longer period of time.

Nebraska↗
USGS2014

Water quality and algal community dynamics of three deepwater lakes in Minnesota utilizing CE-QUAL-W2 models

Water quality, habitat, and fish in Minnesota lakes will potentially be facing substantial levels of stress in the coming decades primarily because of two stressors: (1) land-use change (urban and agricultural) and (2) climate change. Several regional and statewide lake modeling studies have identified the potential linkages between land-use and climate change on reductions in the volume of suitable lake habitat for coldwater fish populations. In recent years, water-resource scientists have been making the case for focused assessments and monitoring of sentinel systems to address how these stress agents change lakes over the long term. Currently in Minnesota, a large-scale effort called “Sustaining Lakes in a Changing Environment” is underway that includes a focus on monitoring basic watershed, water quality, habitat, and fish indicators of 24 Minnesota sentinel lakes across a gradient of ecoregions, depths, and nutrient levels. As part of this effort, the U.S. Geological Survey, in cooperation with the Minnesota Department of Natural Resources, developed predictive water quality models to assess water quality and habitat dynamics of three select deepwater lakes in Minnesota. The three lakes (Lake Carlos in Douglas County, Elk Lake in Clearwater County, and Trout Lake in Cook County) were assessed under recent (2010–11) meteorological conditions. The three selected lakes contain deep, coldwater habitats that remain viable during the summer months for coldwater fish species. Hydrodynamics and water-quality characteristics for each of the three lakes were simulated using the CE-QUAL-W2 model, which is a carbon-based, laterally averaged, two-dimensional water-quality model. The CE-QUAL-W2 models address the interaction between nutrient cycling, primary production, and trophic dynamics to predict responses in the distribution of temperature and oxygen in lakes. The CE-QUAL-W2 models for all three lakes successfully predicted water temperature, on the basis of the two metrics of absolute mean error and root mean square error, using measured inputs of water temperature and nutrients. One of the main calibration tools for CE-QUAL-W2 model development was the vertical profile temperature data, available for all three lakes. For all three lakes, the absolute mean error and root mean square error were less than 1.0 degree Celsius and 1.2 degrees Celsius, respectively, for the different depth ranges used for vertical profile comparisons. In Lake Carlos, simulated water temperatures compared better to measured water temperatures in the epilimnion than in the hypolimnion. The reverse was true for the other two lakes, Elk Lake and Trout Lake, where the simulated results were slightly better for the hypolimnion than the epilimnion. The model also was used to approximate the location of the thermocline throughout the simulation periods, approximately April to November, in all three lake models. Deviations between the simulated and measured water temperatures in the vertical lake profile commonly were because of an offset in the timing of thermocline shifts rather than the simulated results missing thermocline shifts altogether.

Minnesota↗
USGS2006

Pesticide toxicity index for freshwater aquatic organisms, 2nd edition

The U.S. Geological Survey's National Water-Quality Assessment (NAWQA) Program is designed to assess current water-quality conditions, changes in water quality over time, and the effects of natural and human factors on water quality for the Nation's streams and ground-water resources. For streams, one of the most difficult parts of the assessment is to link chemical conditions to effects on aquatic biota, particularly for pesticides, which tend to occur in streams as complex mixtures with strong seasonal patterns. A Pesticide Toxicity Index (PTI) was developed that combines pesticide exposure of aquatic biota (measured concentrations of pesticides in stream water) with acute toxicity estimates (standard endpoints from laboratory bioassays) to produce a single index value for a sample or site. The development of the PTI was limited to pesticide compounds routinely measured in NAWQA studies and to toxicity data readily available from existing databases. Qualifying toxicity data were found for one or more types of test organisms for 124 of the 185 pesticide compounds measured in NAWQA samples, but with a wide range of available bioassays per compound (1 to 232). In the databases examined, there were a total of 3,669 bioassays for the 124 compounds, including 398 48-hour EC50 values (concentration at which 50 percent of test organisms exhibit a sublethal response) for freshwater cladocerans, 699 96-hour LC50 values (concentration lethal to 50 percent of test organisms) for freshwater benthic invertebrates, and 2,572 96-hour LC50 values for freshwater fish. The PTI for a particular sample is the sum of toxicity quotients (measured concentration divided by the median toxicity concentration from bioassays) for each detected pesticide, and thus, is based on the concentration addition model of pesticide toxicity. The PTI can be calculated for specific groups of pesticides and for specific taxonomic groups. Although the PTI does not determine whether water in a sample is toxic to aquatic organisms, its values can be used to rank or compare the toxicity of samples or sites on a relative basis for use in further analysis or additional assessments. The PTI approach may be useful as a basis for comparing the potential significance of pesticides in different streams on a common basis, for evaluating relations between pesticide exposure and observed biological conditions, and for prioritizing where further studies are most needed.

Scientific Investigations Report↗
USGS2021

Spatial and temporal variability of nutrients and algae in the Republican River and Milford Lake, Kansas, June through November 2017 and May through November 2018

Milford Lake has been listed as impaired and designated hypereutrophic because of excessive nutrient loading, specifically biologically available orthophosphate. It is the largest lake by surface area in Kansas and is a reservoir built for purposes including water supply and recreation. In 2015, the Kansas Department of Health and Environment (KDHE) divided the lake into three zones (Zones A, B, and C) for recreational monitoring of harmful algal blooms (HABs). Upstream Zone C has historically been more affected by HABs than Zones B and A, and Zone C has historically had the highest phosphorus concentrations. The U.S. Geological Survey, in cooperation with the KDHE, completed a study in 2017–18 to assess the spatial and temporal variability of nutrients and algae in the Republican River (the primary inflow to Milford Lake) and Milford Lake using spatially and temporally dense data. During the study period, discrete water-quality samples were collected at 36 lake sites, 21 river sites, and 1 pond. All samples were analyzed for nutrients; some samples were also analyzed for chlorophyll, phycocyanin, microcystin, and (or) phytoplankton community composition and abundance. Results from this study provide perspective for understanding the potential role nutrient and algal conditions have in facilitating the formation of HABs and may inform future actions to prevent and mitigate HABs and their potential effects on human and environmental health. In 2017, one low-flow floating synoptic on the Republican River into Zone C of Milford Lake and one 24-hour synoptic in Zone C of Milford Lake were completed. Results from the low-flow floating synoptic on July 17, 2017, at 21 river sites, 8 lake sites, and 1 pond site indicated that the Republican River was not contributing dissolved orthophosphate or total phosphorus concentrations higher than those in the main body of Milford Lake. No patterns in nutrient or total microcystin concentrations were evident from the 24-hour synoptic at two sites on August 24–25, 2017. Total nitrogen was dominated by total Kjeldahl nitrogen (TKN) at both sites. Different oscillation activity in algal biomass and chlorophyll at the two sites demonstrated the variable nature of algal accumulations and their effects on nutrient and dissolved oxygen concentrations. Different patterns in chlorophyll and microcystin concentrations indicate that the relation between algal biomass and cyanotoxin concentrations were different at the two sites, possibly because of differences among algal communities present at each site. Three whole-lake synoptics through Zones A, B, and C in Milford Lake were completed on July 10, August 9, and October 16–17, 2018, at 30 lake sites. Orthophosphate was consistently at least 77 percent of total phosphorus at all sites except the two most uplake sites. At the two most uplake sites, orthophosphate was between 52 and 72 percent of the total phosphorus present at the site. Concentrations of TKN were not consistently increasing or decreasing during 2018. Total nitrogen was dominated by TKN in July and August. Very low concentrations of dissolved nitrate plus nitrite indicate that the nutrient was likely tied up in algal biomass. By October, total nitrogen was approximately one-half TKN and one-half dissolved nitrate plus nitrite. Higher concentrations of dissolved orthophosphate and dissolved nitrate plus nitrite in October than in July and August were likely caused by reduced biological activity (less uptake of nutrients) and lower air and water temperatures. Multiple inflow events (streamflow greater than median daily value) between August and October also may have moved nutrients through the lake. Chlorophyll, phycocyanin, microcystin, and phytoplankton samples were collected at eight sites in 2018. Most sites had their highest chlorophyll concentrations in August. The three most uplake sites had their highest phycocyanin concentrations in July, whereas the other five sites had their highest phycocyanin concentrations in August. Two of 23 samples had detections of total microcystin (0.11 and 0.12 microgram per liter). Phytoplankton community composition mainly consisted of Bacillariophyta, Chlorophyta, Cryptophyta, and Cyanobacteria. Phytoplankton community composition and abundance data described broad seasonal patterns and did not capture the full range of possible conditions at each site.

Kansas↗
USGS2022

Assessment of fecal contamination sources to Alley Creek, Queens County, New York, August 2020–June 2021

Alley Creek, a tributary to Little Neck Bay in Queens County, New York, has been designated by the New York State Department of Environmental Conservation as impaired (Class I) for fecal coliform because of pollution from combined sewer overflow, including stormwater runoff. The U.S. Geological Survey, in cooperation with the New York City Department of Environmental Protection, conducted a 1-year study from August 2020 to June 2021 using microbial source tracking (MST) methods to assess potential host sources of fecal contamination (for example, human, canine, and waterfowl) from the following: three outfall sites, TI–025, TI–008, and TI–024; an artesian well (Q277) adjacent to Alley Creek; and natural waters within the Alley Creek watershed and Little Neck Bay. In addition to analyzing for MST markers, field measurements such as water temperature and specific conductance, samples for total suspended solids, and fecal indicator bacteria (FIB; enterococci and fecal coliform) were collected. Pharmaceutical compounds were also collected for analysis, and the results of sampling were compared spatially and temporally to help support management decisions related to mitigation of fecal sources to Alley Creek. Factors that could affect concentrations, including tidal conditions, seasonality, and weather conditions, also were assessed. A sediment resuspension laboratory experiment was designed to replicate tidal activity in Alley Creek using sediment collected in the sewers and on the shoreline, as well as water collected from Oakland Lake. These sediment samples were assessed to understand the relation between sediment resuspension and FIB in the water column. The human MST markers used for this study, Bacteroides HF183/BacR287, and crAssphage CPQ_056 and CPQ_064, were detected in most samples (27 of 28) collected at the three outfall sites along Alley Creek, whereas the canine marker BacCan was less prevalent (20 of 28 samples) but exhibited a pattern of relative concentrations similar to the human markers. The waterfowl MST GFD marker was detected in 7 of 28 samples collected at the three outfall sites. Human MST markers were not detected at Oakland Lake (which drains through a combined sewer line to Alley Creek at TI–008), indicating minimal or nonexistent influence of sewage contamination in the lake. Groundwater samples collected from Q277 did not contain any MST markers, and concentrations of fecal coliform were less than 10 colony forming units per 100 milliliters. Although FIB did not correlate well with total suspended solids for individual sample sets, samples collected following precipitation and high-turbidity events were typically found to have higher concentrations of FIB than dry-weather samples. Results from the pharmaceutical compounds analysis provided additional evidence for determining known and suspected human sources when coupled with MST markers. Together, the MST, pharmaceutical, and FIB data generated by this study, along with supplementary data such as locations of point sources, locations of wildlife populations, and tidal exchange data, may provide reliable information on source identification and transport mechanisms of fecal contamination to Alley Creek.

New York↗
USGS2007

Borehole geophysical monitoring of amendment emplacement and geochemical changes during vegetable oil biostimulation, Anoka County Riverfront Park, Fridley, Minnesota

The U.S. Geological Survey ( USGS ) conducted a series of geophysical investigations to monitor a field-scale biostimulation pilot project at the Anoka County Riverfront Park ( ACP ), downgradient from the Naval Industrial Reserve Ordnance Plant, in Fridley, Minnesota. The pilot project was undertaken by the U.S. Naval Facilities Engineering Command, Southern Division, for the purpose of evaluating biostimulation using emulsified vegetable oil to treat ground water contaminated with chlorinated hydrocarbons. Vegetable oil was introduced to the subsurface to serve as substrate for naturally occurring microbes, which ultimately break down chlorinated hydrocarbons into chloride, carbon dioxide, and water through oxidation-reduction reactions. In support of this effort, the USGS collected cross-borehole radar data and conventional borehole geophysical data in five site visits over 1.5 years to evaluate the effectiveness of geophysical methods for monitoring emplacement of the vegetable oil emulsion and for tracking changes in water chemistry. Radar zero-offset profile ( ZOP ) data, radar traveltime tomograms, electromagnetic ( EM ) induction logs, natural gamma logs, neutron porosity logs, and magnetic susceptibility logs were collected and analyzed. In order to facilitate data interpretation and to test the effectiveness of radar for monitoring oil-emulsion placement and movement, three injection mixtures with different radar signatures were used: (1) vegetable oil emulsion, (2) vegetable oil emulsion with a colloidal iron tracer, and (3) vegetable oil emulsion with a magnetite tracer. Based on petrophysical modeling, mixture (1) was expected to increase radar velocity and decrease radar attenuation relative to background—a water-saturated porous medium; mixtures (2) and (3) were expected to increase radar velocity and increase radar attenuation because of their greater electrical conductivity compared to background ground water. Radar ZOP data and tomograms show increased EM velocity in the vicinity of injection wells. Comparison of pre- and post-injection datasets shows that velocity anomalies are observed only in planes connected to injection wells, indicating that the emulsified vegetable oil does not migrate far after injection. In contrast to the localization of velocity anomalies, radar attenuation anomalies are observed in all zero-offset profiles, particularly those downgradient from the injection wells. Despite the expected signatures of different tracers, increases in attenuation are observed downgradient from all three injection wells; thus, we infer that the attenuation changes do not result from the iron tracers alone. Over the period of data collection, the slowness (reciprocal velocity) anomalies are relatively stable, whereas the attenuation anomalies generally increase in magnitude and extent. One explanation for the attenuation changes is that products of vegetable oil-enhanced biodegradation (for example, chloride) increase the specific conductance of ground water and thus bulk electrical conductivity and radar attenuation. This interpretation is supported by the results of EM-induction and magnetic susceptibility logs, which indicate increases in electrical conductivity in the absence of magnetic anomalies that might result from the iron and magnetite. Based on the geophysical data, conceptual models of the distributions of emulsified vegetable oil and ground water with altered chemistry were developed. The field data indicate that, in several cases, the plume of ground water with altered chemistry would not be detected by direct chemical sampling given the construction of monitoring wells; hence the geophysical data provide valuable site-specific insights for the interpretation of water samples and monitoring of biostimulation projects. Application of geophysical methods to data from the ACP demonstrated the utility of radar for monitoring biostimulation injections.

Minnesota↗
USGS2007

Hydrogeologic characteristics of the St. Croix River basin, Minnesota and Wisconsin: Implications for the susceptibility of ground water to potential contamination

Population growth in the St. Croix River Basin in Minnesota and Wisconsin has intensified concerns of county resource managers and the National Park Service, which is charged with protecting the St. Croix National Scenic Riverway, about the potential for ground-water contamination in the basin. This report describes a previously developed method that was adapted to illustrate potential ground-water-contamination susceptibility in the St. Croix River Basin. The report also gives an estimate of ground-water-residence time and surface-water/ground-water interaction as related to natural attenuation and movement of contaminants in five tributary basins. A ground-water-contamination-susceptibility map was adapted from a state-wide map of Wisconsin to the St. Croix River Basin by use of well-driller construction records and regional maps of aquifer properties in Minnesota and Wisconsin. Measures of various subsurface properties were combined to generate a spatial index of susceptibility. The subjective index method developed for the State of Wisconsin by Schmidt (1987) 1 was not derived from analyses of water-quality data or physical processes. Nonetheless, it was adapted for this report to furnish a seamless map across state boundaries that would be familiar to many resource managers. Following this method, areas most susceptible to contamination appear to have coarse-grained sediments (sands or gravels) and shallow water tables or are underlain by carbonate-bedrock aquifers. The least susceptible areas appear to have fine-grained sediments and deep water tables. If an aquifer becomes contaminated, the ground-water-residence time can affect potential natural attenuation along the ground-water-flow path. Mean basin ground-water-residence times were computed for the Apple, Kettle, Kinnickinnic, Snake and Sunrise River Basins, which are tributary basins to the St. Croix Basin, by use of average aquifer properties of saturated thickness, porosity, and recharge rates. The Apple River Basin had the shortest mean ground-water-residence times (20–120 years), owing largely to the moderate saturated thickness and high recharge rate in the basin. The Kinnickinnic and Sunrise River Basins had the longest mean residence times (60–350 and 70–390 years, respectively) chiefly because of the relatively large saturated thickness of the basins. Owing to limitations of the residence-time calculations, actual ground-water-residence times will vary around the mean values within each basin and may range from days or weeks in karst carbonate aquifers to millennia in deep confined sandstone aquifers. Areas of relatively short residence time (less than the median residence time in each basin) were identified by use of ground-water-flow models for each of the five tributary basins. Results of simulations show that these areas, in which contaminants may have relatively less time for natural attenuation along the short flow paths, generally occur near streams and rivers where ground water discharges to the surface. Finally, the ground-water-flow models were used to simulate ground-water/surface-water interaction in the five tributary basins. Results of simulations show that some lakes and reservoirs leak surface water into the ground-water-flow system on their downgradient side, where the surface-water outflow has been restricted by a dam or a naturally constricted outlet. These locations are noteworthy because contaminated surface waters could potentially enter the ground-water-flow system at these locations.

Minnesota, Wisconsin↗
USGS2023

Assessment of prerestoration water quality in the Herring River to support adaptive management at the Cape Cod National Seashore

In 2020 and 2021, the U.S. Geological Survey, Cape Cod National Seashore of the National Park Service, and Friends of Herring River cooperated to assess nutrient and suspended sediment concentrations across the ocean-estuary boundary at a dike on the Herring River on Chequessett Neck Road in Wellfleet, Massachusetts, that has restricted saltwater inputs by regulating water inflow through three culverts or sluiceways into the watershed for more than 100 years. The dike is slated to be removed, and the purpose of this project was to characterize natural variability of nutrient and suspended sediment concentration during flood tide and ebb tide conditions at the dike based on seasonal and environmental variables. This baseline can be used to assess if removal of the dike is likely to result in measurable changes in water quality. Data from the current [2023] study were aggregated with previously published data from November 2015 through September 2018 to provide a long-term record. Samples for the current [2023] study were collected from flood and following ebb tides approximately twice per month from June 2020 through December 2021 at fixed time intervals after the beginning of the tides. Samples were analyzed for nitrate plus nitrite, ammonium, total dissolved nitrogen, total nitrogen, orthophosphate, total dissolved phosphorus, total phosphorus, silica, dissolved organic carbon, and suspended sediment. Constituent concentrations generally were lower using fixed time sampling than in previous studies that used flow-weighted composite sampling, except for nitrate plus nitrite and orthophosphate. Concentrations of nitrate plus nitrite, ammonium, total nitrogen, total dissolved nitrogen, silica, and dissolved organic nitrogen generally were higher on the ebb tide than on the flood tide. By contrast, concentrations of orthophosphate, total phosphorus, and total dissolved phosphorus were generally similar between flood and ebb tides. Most nutrient concentrations except silica and ammonium varied seasonally on flood and ebb tides. Phosphorus species, total nitrogen, and dissolved organic carbon concentrations generally peaked in mid- to late summer and were lowest in winter. For nitrate, the reverse was true. Nutrient concentrations generally were higher on the ebb tide than on the flood tide except for total dissolved phosphorus and total phosphorus where differences between flood and ebb tide depended on season. Constituent concentrations were similar between spring, neap, and midamplitude tides on both the flood and ebb tides. Nitrate, ammonium, total nitrogen, and silica concentrations were positively correlated with precipitation and runoff. Orthophosphate, total dissolved phosphorus, total phosphorus, and dissolved organic carbon were positively correlated with surface air temperature, downwelling shortwave radiation, and ocean water temperature. Nitrate, ammonium, and silica concentration were negatively correlated with surface air temperature and ocean water temperature. Orthophosphate and total dissolved phosphorus were negatively correlated with runoff. Nitrate plus nitrite, ammonium, and silica concentrations were negatively correlated with downwelling shortwave radiation.

Massachusetts↗
USGS2014

Hydrology and numerical simulation of groundwater movement and heat transport in Snake Valley and surrounding areas, Juab, Miller, and Beaver Counties, Utah, and White Pine and Lincoln Counties, Nevada

Snake Valley and surrounding areas, along the Utah-Nevada state border, are part of the Great Basin carbonate and alluvial aquifer system. The groundwater system in the study area consists of water in unconsolidated deposits in basins and water in consolidated rock underlying the basins and in the adjacent mountain blocks. Most recharge occurs from precipitation on the mountain blocks and most discharge occurs from the lower altitude basin-fill deposits mainly as evapotranspiration, springflow, and well withdrawals. The Snake Valley area regional groundwater system was simulated using a three-dimensional model incorporating both groundwater flow and heat transport. The model was constructed with MODFLOW-2000, a version of the U.S. Geological Survey’s groundwater flow model, and MT3DMS, a transport model that simulates advection, dispersion, and chemical reactions of solutes or heat in groundwater systems. Observations of groundwater discharge by evapotranspiration, springflow, mountain stream base flow, and well withdrawals; groundwater-level altitudes; and groundwater temperatures were used to calibrate the model. Parameter values estimated by regression analyses were reasonable and within the range of expected values. This study represents one of the first regional modeling efforts to include calibration to groundwater temperature data. The inclusion of temperature observations reduced parameter uncertainty, in some cases quite significantly, over using just water-level altitude and discharge observations. Of the 39 parameters used to simulate horizontal hydraulic conductivity, uncertainty on 11 of these parameters was reduced to one order of magnitude or less. Other significant reductions in parameter uncertainty occurred in parameters representing the vertical anisotropy ratio, drain and river conductance, recharge rates, and well withdrawal rates. The model provides a good representation of the groundwater system. Simulated water-level altitudes range over almost 2,000 meters (m); 98 percent of the simulated values of water-level altitudes in wells are within 30 m of observed water-level altitudes, and 58 percent of them are within 12 m. Nineteen of 20 simulated discharges are within 30 percent of observed discharge. Eighty-one percent of the simulated values of groundwater temperatures in wells are within 2 degrees Celsius (°C) of the observed values, and 55 percent of them are within 0.75 °C. The numerical model represents a more robust quantification of groundwater budget components than previous studies because the model integrates all components of the groundwater budget. The model also incorporates new data including (1) a detailed hydrogeologic framework, and (2) more observations, including several new water-level altitudes throughout the study area, several new measurements of spring discharge within Snake Valley which had not previously been monitored, and groundwater temperature data. Uncertainty in the estimates of subsurface flow are less than those of previous studies because the model balanced recharge and discharge across the entire simulated area, not just in each hydrographic area, and because of the large dataset of observations (water-level altitudes, discharge, and temperatures) used to calibrate the model and the resulting transmissivity distribution. Groundwater recharge from precipitation and unconsumed irrigation in Snake Valley is 160,000 acre-feet per year (acre-ft/yr), which is within the range of previous estimates. Subsurface inflow from southern Spring Valley to southern Snake Valley is 13,000 acre-ft/yr and is within the range of previous estimates; subsurface inflow from Spring Valley to Snake Valley north of the Snake Range, however, is only 2,200 acre-ft/yr, which is much less than has been previously estimated. Groundwater discharge from groundwater evapotranspiration and springs is 100,000 acre-ft/yr, and discharge to mountain streams is 3,300 acre-ft/yr; these are within the range of previous estimates. Current well withdrawals are 28,000 acre-ft/yr. Subsurface outflow from Snake Valley moves into Pine Valley (2,000 acre-ft/yr), Wah Wah Valley (23 acre-ft/yr), Tule Valley (33,000 acre-ft/yr), Fish Springs Flat (790 acre-ft/yr), and outside of the study area towards Great Salt Lake Desert (8,400 acre-ft/yr); these outflows, totaling about 44,000 acre-ft/yr, are within the range of previous estimates. The subsurface flow amounts indicate the degree of connectivity between hydrographic areas within the study area. The simulated transmissivity and locations of natural discharge, however, provide a better estimate of the effect of groundwater withdrawals on groundwater resources than does the amount and direction of subsurface flow between hydrographic areas. The distribution of simulated transmissivity throughout the study area includes many areas of high transmissivity within and between hydrographic areas. Increased well withdrawals within these high transmissivity areas will likely affect a large part of the study area, resulting in declining groundwater levels, as well as leading to a decrease in natural discharge to springs and evapotranspiration.

Nevada, Utah↗
USGS2011

Collection, processing, and interpretation of ground-penetrating radar data to determine sediment thickness at selected locations in Deep Creek Lake, Garrett County, Maryland, 2007

The U.S. Geological Survey collected geophysical data in Deep Creek Lake in Garrett County, Maryland, between September 17 through October 4, 2007 to assist the Maryland Department of Natural Resources to better manage resources of the Lake. The objectives of the geophysical surveys were to provide estimates of sediment thickness in shallow areas around the Lake and to test the usefulness of three geophysical methods in this setting. Ground-penetrating radar (GPR), continuous seismic-reflection profiling (CSP), and continuous resistivity profiling (CRP) were attempted. Nearly 90 miles of GPR radar data and over 70 miles of CSP data were collected throughout the study area. During field deployment and testing, CRP was determined not to be practical and was not used on a large scale. Sediment accumulation generally could be observed in the radar profiles in the shallow coves. In some seismic profiles, a thin layer of sediment could be observed at the water bottom. The radar profiles appeared to be better than the seismic profiles for the determination of sediment thickness. Although only selected data profiles were processed, all data were archived for future interpretation. This investigation focused on selected regions of the study area, particularly in the coves where sediment accumulations were presumed to be thickest. GPR was the most useful tool for interpreting sediment thickness, especially in these shallow coves. The radar profiles were interpreted for two surfaces of interest-the water bottom, which was defined as the "2007 horizon," and the interface between Lake sediments and the original Lake bottom, which was defined as the "1925 horizon"-corresponding to the year the Lake was impounded. The ground-penetrating radar data were interpreted on the basis of characteristics of the reflectors. The sediments that had accumulated in the impounded Lake were characterized by laminated, parallel reflections, whereas the subsurface below the original Lake bottom was characterized by more discontinuous and chaotic reflections, often with diffractions indicating cobbles or boulders. The reflectors were picked manually along the water bottom and along the interface between the Lake sediments and the pre-Lake sediments. A simple graphic approach was used to convert traveltimes to depth through water and depth through saturated sediments using velocities of the soundwaves through the water and the saturated sediments. Nineteen cross sections were processed and interpreted in 9 coves around Deep Creek Lake, and the difference between the 2007 horizon and the 1925 horizon was examined. In most areas, GPR data indicate a layer of sediment between 1 and 7 feet thick. When multiple cross sections from a single cove were compared, the cross sections indicated that sediment thickness decreased toward the center of the Lake.

Maryland↗
USGS2009

Continuous Turbidity Monitoring in the Indian Creek Watershed, Tazewell County, Virginia, 2006-08

Thousands of miles of natural gas pipelines are installed annually in the United States. These pipelines commonly cross streams, rivers, and other water bodies during pipeline construction. A major concern associated with pipelines crossing water bodies is increased sediment loading and the subsequent impact to the ecology of the aquatic system. Several studies have investigated the techniques used to install pipelines across surface-water bodies and their effect on downstream suspended-sediment concentrations. These studies frequently employ the evaluation of suspended-sediment or turbidity data that were collected using discrete sample-collection methods. No studies, however, have evaluated the utility of continuous turbidity monitoring for identifying real-time sediment input and providing a robust dataset for the evaluation of long-term changes in suspended-sediment concentration as it relates to a pipeline crossing. In 2006, the U.S. Geological Survey, in cooperation with East Tennessee Natural Gas and the U.S. Fish and Wildlife Service, began a study to monitor the effects of construction of the Jewell Ridge Lateral natural gas pipeline on turbidity conditions below pipeline crossings of Indian Creek and an unnamed tributary to Indian Creek, in Tazewell County, Virginia. The potential for increased sediment loading to Indian Creek is of major concern for watershed managers because Indian Creek is listed as one of Virginia's Threatened and Endangered Species Waters and contains critical habitat for two freshwater mussel species, purple bean (Villosa perpurpurea) and rough rabbitsfoot (Quadrula cylindrical strigillata). Additionally, Indian Creek contains the last known reproducing population of the tan riffleshell (Epioblasma florentina walkeri). Therefore, the objectives of the U.S. Geological Survey monitoring effort were to (1) develop a continuous turbidity monitoring network that attempted to measure real-time changes in suspended sediment (using turbidity as a surrogate) downstream from the pipeline crossings, and (2) provide continuous turbidity data that enable the development of a real-time turbidity-input warning system and assessment of long-term changes in turbidity conditions. Water-quality conditions were assessed using continuous water-quality monitors deployed upstream and downstream from the pipeline crossings in Indian Creek and the unnamed tributary. These paired upstream and downstream monitors were outfitted with turbidity, pH (for Indian Creek only), specific-conductance, and water-temperature sensors. Water-quality data were collected continuously (every 15 minutes) during three phases of the pipeline construction: pre-construction, during construction, and post-construction. Continuous turbidity data were evaluated at various time steps to determine whether the construction of the pipeline crossings had an effect on downstream suspended-sediment conditions in Indian Creek and the unnamed tributary. These continuous turbidity data were analyzed in real time with the aid of a turbidity-input warning system. A warning occurred when turbidity values downstream from the pipeline were 6 Formazin Nephelometric Units or 15 percent (depending on the observed range) greater than turbidity upstream from the pipeline crossing. Statistical analyses also were performed on monthly and phase-of-construction turbidity data to determine if the pipeline crossing served as a long-term source of sediment. Results of this intensive water-quality monitoring effort indicate that values of turbidity in Indian Creek increased significantly between the upstream and downstream water-quality monitors during the construction of the Jewell Ridge pipeline. The magnitude of the significant turbidity increase, however, was small (less than 2 Formazin Nephelometric Units). Patterns in the continuous turbidity data indicate that the actual pipeline crossing of Indian Creek had little influence of downstream water quality; co

Scientific Investigations Report↗
USGS2023

Potentiometric surfaces (2013, 2015), groundwater quality (2010–15), and water-level changes (2011–13, 2013–15) in the Sparta-Memphis aquifer in Arkansas

The Sparta-Memphis aquifer, present across much of eastern Arkansas, is the second most used groundwater resource in the State, with the Mississippi River Valley alluvial aquifer being the primary groundwater resource. The U.S. Geological Survey, in cooperation with Arkansas Department of Agriculture-Natural Resources Division, Arkansas Geological Survey, Natural Resources Conservation Service, Union County Water Conservation Board, and the Union County Conservation District, collects groundwater data across the Sparta-Memphis aquifer extent in Arkansas. This report presents water-level data for measurements conducted during two time periods, January–May 2013 and January–June 2015, and discusses water-level altitude changes for the 2011–13 and 2013–15 periods in the Sparta-Memphis aquifer. Accompanying water-level data in this report include groundwater-quality data for the period 2010–15 in the Sparta-Memphis aquifer. Groundwater data can guide ongoing and future groundwater-monitoring efforts and inform management of the aquifers in Arkansas. Water levels measured at 306 wells from January to May 2013 and 273 wells from January to June 2015 are graphically presented as potentiometric-surface maps. Measurements from 2011, 2013, and 2015 were used in the construction of 2011–13 and 2013–15 water-level change maps. Select long-term hydrographs are included in the report to illustrate water-level changes at the local scale. Water-level data show the influence of climate, pumping, and conservation and management efforts on groundwater levels. With respect to climate, the study area experienced extreme drought conditions between January 2011 and December 2012. The proximate effects of drought—increased evapotranspiration, decreased recharge, and increased irrigation needs—resulted in water-level declines that were particularly notable in the northern and central portions of the study area. Groundwater sampled in 2010–15 from 148 wells completed in the Sparta-Memphis aquifer was analyzed for specific conductance, pH, chloride (Cl) concentration, and bromide (Br) concentration. In 2015, groundwater-quality data from 103 wells completed in the Sparta-Memphis aquifer had a median specific conductance of 356 microsiemens per centimeter at 25 degrees Celsius and a median Cl concentration of 9.5 milligrams per liter (mg/L). The data show two areas of higher Cl (greater than 10 mg/L) and higher Br (greater than 0.5 mg/L) concentrations in Union, Calhoun, and Bradley Counties in southern Arkansas and Monroe and Phillips Counties in eastern-central Arkansas. A Cl and Br mixing model indicates the two regions of wells may have different sources of higher salinity. In the greater Union County area, water in most wells may be a mixture of recharge or precipitation and higher salinity groundwater from the Nacatoch aquifer. Water in wells in eastern-central Arkansas may be sourced from aquifers having a higher Cl concentration (and thus, also a higher Cl-to-Br ratio).

Arkansas↗
USGS2010

Status and understanding of groundwater quality in the North San Francisco Bay groundwater basins, 2004: California GAMA Priority Basin Project

Groundwater quality in the approximately 1,000-square-mile (2,590-square-kilometer) North San Francisco Bay study unit was investigated as part of the Priority Basin Project of the Groundwater Ambient Monitoring and Assessment (GAMA) Program. The study unit is located in northern California in Marin, Napa, and Sonoma Counties. The GAMA Priority Basin Project is being conducted by the California State Water Resources Control Board in collaboration with the U.S. Geological Survey (USGS) and the Lawrence Livermore National Laboratory. The GAMA North San Francisco Bay study was designed to provide a spatially unbiased assessment of untreated groundwater quality in the primary aquifer systems. The assessment is based on water-quality and ancillary data collected by the USGS from 89 wells in 2004 and water-quality data from the California Department of Public Health (CDPH) database. The primary aquifer systems (hereinafter referred to as primary aquifers) were defined by the depth interval of the wells listed in the CDPH database for the North San Francisco Bay study unit. The quality of groundwater in shallower or deeper water-bearing zones may differ from that in the primary aquifers; shallower groundwater may be more vulnerable to surficial contamination. The first component of this study, the status of the current quality of the groundwater resource, was assessed by using data from samples analyzed for volatile organic compounds (VOC), pesticides, and naturally occurring inorganic constituents, such as major ions and trace elements. This status assessment is intended to characterize the quality of groundwater resources within the primary aquifers of the North San Francisco Bay study unit, not the treated drinking water delivered to consumers by water purveyors. Relative-concentrations (sample concentration divided by the health- or aesthetic-based benchmark concentration) were used for evaluating groundwater quality for those constituents that have Federal and (or) California benchmarks. A relative-concentration greater than (>) 1.0 indicates a concentration above a benchmark, and less than or equal to (≤) 1.0 indicates a concentration equal to or below a benchmark. Relative-concentrations of organic and special interest constituents were classified as “high” (relative-concentration > 1.0), “moderate” (0.1 < relative-concentration ≤ 1.0), or “low” (relative-concentration ≤ 0.1). Inorganic constituent relative-concentrations were classified as “high” (relative-concentration > 1.0), “moderate” (0.5 < relative-concentration ≤ 1.0), or “low” (relative-concentration ≤ 0.5). Aquifer-scale proportion was used as a metric for evaluating regional-scale groundwater quality. High aquifer-scale proportion is defined as the percentage of the primary aquifers that have a relative-concentration greater than 1.0; proportion is calculated on an areal rather than a volumetric basis. Moderate and low aquifer-scale proportions were defined as the percentage of the primary aquifers that have moderate and low relative-concentrations, respectively. Two statistical approaches—grid-based and spatially-weighted—were used to evaluate aquifer-scale proportion for individual constituents and classes of constituents. Grid-based and spatially-weighted estimates were comparable in the North San Francisco Bay study unit (90-percent confidence intervals). For inorganic constituents with human-health benchmarks, relative-concentrations were high in 14.0 percent of the primary aquifers, moderate in 35.8 percent, and low in 50.2 percent. The high aquifer-scale proportion of inorganic constituents primarily reflected high aquifer-scale proportions of arsenic (10.0 percent), boron (4.1 percent), and lead (1.6 percent). In contrast, relative-concentrations of organic constituents (one or more) were high in 1.4 percent, moderate in 4.9 percent, and low in 93.7 percent (not detected in 64.8 percent) of the primary aquifers. The high aquifer-scale proportion of organic constituents primarily reflected high aquifer-scale proportions of PCE (1.3 percent), TCE (0.1 percent), and 1,1-dichloroethene (0.1 percent). The inorganic constituents with secondary maximum contaminant levels (SMCL), manganese and iron, had relative-concentrations that were high in 40.8 percent and 24.4 percent of the primary aquifers, respectively. Of the 255 organic and special-interest constituents analyzed for, 26 constituents were detected. Two organic constituents were frequently detected (in 10 percent or more of samples), the trihalomethane chloroform and the herbicide simazine, but both were detected at low relative-concentrations. The second component of this study, the understanding assessment, identified the natural and human factors that affect groundwater quality by evaluating land use, physical characteristics of the wells, geochemical conditions of the aquifer, and water temperature. Results from these evaluations were used to explain the occurrence and distribution of constituents in the study unit. The understanding assessment indicated that a majority of the wells that contained nitrate also had an urban or agricultural land-use classification, had a modern or mixed age classification, and had depths to their top perforations <100 ft (30 m). Geochemical data are consistent with partial denitrification of nitrate in some reducing groundwaters in the terminal and deeper parts of the flow system. High and moderate relative-concentrations of arsenic may be attributed to reductive dissolution of manganese or iron oxides, or to desorption or inhibition of arsenic sorption under alkaline conditions. Arsenic concentrations increased with increasing depth and groundwater age in the North San Francisco Bay study unit. High to moderate relative-concentrations of boron were primarily associated with hydrothermal activity or high-salinity waters in the Napa Sonoma lowlands. Simazine was detected in groundwater classified as modern and mixed age more often than in groundwater classified as pre-modern age, while chloroform was detected most often in groundwater classified as mixed age. Simazine and chloroform also were observed in wells that had surrounding land use classified as agricultural or land use classified as urban, and top of perforation depths less than 100 ft (30 m). Together, the occurrence of chloroform and simazine in shallow wells with modern or mixed groundwater located in urban or agricultural areas suggests that these constituents result from anthropogenic activities during the last 50 years. Tritium, helium-isotope, and carbon-14 data were used to classify the predominant age of groundwater samples into three categories: modern (water that has entered the aquifer in the last 50 years), pre-modern (water that entered the aquifer more than 50 years to tens of thousands of years ago), and mixed (mixtures of modern- and pre-modern-age waters). Arsenic, iron, and total dissolved solids (TDS) concentrations were significantly greater in groundwater having pre-modern-age classification than modern, suggesting that these constituents accumulate with groundwater residence time.

California↗
USGS2010

Hydrogeology and water quality in the Snake River alluvial aquifer at Jackson Hole Airport, Jackson, Wyoming, September 2008–June 2009

The hydrogeology and water quality of the Snake River alluvial aquifer, at the Jackson Hole Airport in northwest Wyoming, was studied by the U.S. Geological Survey in cooperation with the Jackson Hole Airport Board and the Teton Conservation District during September 2008-June 2009. Hydrogeologic conditions were characterized using data collected from 14 Jackson Hole Airport wells. Groundwater levels are summarized in this report and the direction of groundwater flow, hydraulic gradients, and estimated groundwater velocity rates in the Snake River alluvial aquifer underlying the study area are presented. Analytical results of chemical, dissolved gas, and stable isotopes are presented and summarized. Seasonally, the water table at Jackson Hole Airport was lowest in early spring and reached its peak in July, with an increase of 12 to 14 feet between April and July 2009. Groundwater flow was predominantly horizontal but had the hydraulic potential for downward flow. The direction of groundwater flow was from the northeast to the west-southwest. Horizontal groundwater velocities within the Snake River alluvial aquifer at the airport were estimated to be about 26 to 66 feet per day. This indicates that the traveltime from the farthest upgradient well to the farthest downgradient well was approximately 53 to 138 days. This estimate only describes the movement of groundwater because some solutes may move at a rate much slower than groundwater flow through the aquifer. The quality of the water in the alluvial aquifer generally was considered good. The alluvial aquifer was a fresh, hard to very hard, calcium carbonate type water. No constituents were detected at concentrations exceeding U.S. Environmental Protection Agency Maximum Contaminant Levels, and no anthropogenic compounds were detected at concentrations greater than laboratory reporting levels. The quality of groundwater in the alluvial aquifer generally was suitable for domestic and other uses; however, dissolved iron and manganese were detected at concentrations exceeding the U.S. Environmental Protection Agency Secondary Maximum Contaminant Levels for drinking water in two monitoring wells. These secondary standards are esthetic guidelines only and are nonenforceable. Iron and manganese are likely both natural components of the geologic materials in the area and may have become mobilized in the aquifer due to reduction/oxidation (redox) processes. Additionally, measurements of dissolved-oxygen concentrations and analyses of major ions and nutrients indicate reducing conditions exist at two of the seven wells sampled. Reducing conditions in an otherwise oxic aquifer system are indicative of an upgradient or in-situ source of organic carbon. The nature of the source of organic carbon at the airport could not be determined. View report for unabridged abstract.

Wyoming↗