Geology Reports⌕ Search

SEARCH · Geology Reports

Results for “Quaternary”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 757 records · Page 42Linked to original sources
USGS1963

Ground-water geology of Grayson County, Texas

Grayson County in north-central Texas is near the north edge of the West Gulf Coastal Plain. The county has an area of 927 square miles and had an estimated population of 79,500 in 1957. The major town is Sherman, which has an estimated population of 31,000. The northern two-thirds of the county is drained by tributaries of the Red River; the southern one-third is drained by tributaries of the Trinity River Sedimentary rocks exposed at the surface in Grayson County are of Cretaceous and Quaternary age. Sand, clay, marl, and limestone of Cretaceous age, having a maximum thickness of about 3,600 feet, underlie the county; the beds dip regionally to the southeast. Quaternary alluvium mantles part of the surface along the Red River and occurs in scattered patches elsewhere in the county. The Trinity group and Woodbine formation of Cretaceous age are the principal water-bearing formations. Other stratigraphic units that yield water to wells are, in order of importance, the Quaternary alluvium and the Pawpaw formation, Eagle Ford shale, and Austin chalk of Cretaceous age. Ground water in Grayson County generally moves eastward and southward from areas of recharge to areas of discharge. Average rates of water movement in the Trinity group and Woodbine formation are estimated to be about 1.5 and 15 feet per year, respectively. The chief source of recharge to these aquifers is precipitation on the outcrop, although Lake Texoma contributed some recharge to the Trinity where it crops out in the lake. Ground water discharges naturally by evapotranspiration, by vertical leakage, through springs, artificially through wells, and by underflow out of the county to the southeast. The withdrawal of ground water in Grayson County in 1957 was about 5 mgd. Of this amount, about 61 percent came from the Woodbine formation, about 36 percent from the Trinity group, and about 3 percent from the other water-bearing formations. About 65 percent of the ground water pumped in Grayson County is withdrawn in the Sherman area. Increased withdrawal of water since World War II has resulted in a rapid decline of the water levels in parts of Grayson County. The maximum decline in the Trinity group at Sherman from 1945 to 1958 was 113 feet, or about 8 feet per year. During the same period, water levels in the Woodbine formation at Sherman declined as much as 156 feet, an average of 12 feet per year. Total declines since the early part of the 20th century were at least 180 feet in the Trinity group and about 240 feet in the Woodbine formation. Water levels in the area of outcrop of the principal aquifers, fluctuating chiefly in response to rainfall or changes in the natural rate of recharge, showed no appreciable decline from 1957 to 1959. Coefficients of transmissibility, determined from pumping tests in Grayson County, averaged 2,800 gpd per ft for the Trinity group and 3,200 gpd per ft for the Woodbine formation. Kesults of chemical analyses of water samples indicate that the ground water in Grayson County is suitable for most purposes. The Trinity group generally yields soft water that has a high sodium bicarbonate content and is of questionable quality for irrigation. The water from the Woodbine formation ranges more widely in chemical composition than the water from the Trinity. It generally is soft but has a high iron content; it is usually suitable for irrigation in the outcrop area but unsuitable in the downdip area. Water from the other water-bearing formation, though generally hard, is suitable for most purposes, judging from the few analyses available. The ground-water resources of Grayson County have been only partly developed. The volume of fresh water in transient storage in the Trinity group and Woodbine formation is estimated to be about 60 and 25 million acre-feet, respectively. Most of this water is not practicably recoverable because of the depth at which it occurs, but relatively high artesian heads and large available drawdowns in much of the county are favorable to future development within economic limits of pumping lift. In the Sherman area, however, concentrated pumping has caused large declines in the water levels, resulting in some dewatering of the Woodbine. Because of the large margin of 'safety before dewatering of the Trinity group begins, the Trinity is the most favorable source of additional ground water for Sherman. However, the higher lifting costs should be considered. Large to moderate amounts of additional ground water can be obtained from the Trinity group and Woodbine formation in most presently undeveloped areas in the county. Water suitable for irrigation is available in moderate to large amounts from the Woodbine formation in places on its outcrop. A limiting factor to any large ground-water development, however, is the extent and thickness of saturated fresh-water sand available in the area. The thickness of saturated fresh-water sand in the Trinity decreases northward; the thickness of the sand in the Woodbine is more erratic and has little definite pattern. Moderate to large supplies of water may be available from the alluvium near the Red River, but more information is needed before definite conclusions can be reached.

Water Supply Paper↗
USGS1965

Geology and ground water in the central part of Apache County, Arizona

The central part of Apache County, Ariz., includes an area of about 3,300 square miles between the Navajo Indian Reservation to the north and U.S. Highway 60 to the south. Sedimentary rocks in the area range from Pennsylvanian to Quaternary in age and from 2,000 to more than 6,000 feet in thickness. The strata were tilted to the northeast, and part of the Upper Triassic and all the Jurassic and Lower Cretaceous rocks were eroded away before strata of Late Cretaceous age were deposited. Basaltic lava flows and cinder cones, representing four general periods of eruption in late Miocene to Quaternary time, are widespread in the southern part of the area. Pennsylvanian and Permian rocks overlie basement rocks of granite and diorite and include the Supai Formation, the Coconino Sandstone, and the Kaibab Limestone. The Supai Formation is 1,000 to 2,000 feet thick and consists of interbedded red and brown mudstone, siltstone, sandstone, limestone, and evaporites. It contains water of very poor quality outside Apache County. The Coconino Sandstone is 200 to 250 feet thick and consists of light-gray fine- to medium-grained sandstone. It contains water suitable for domestic use in the south and water unsuitable for most purposes in the north. The Coconino Sandstone underlies all Central Apache County in the subsurface. The yellowish-gray to dark-gray Kaibab Limestone is present in the southern two-thirds of the area and is 0 to 350 feet thick. It contains water where it is fractured and combines with the Coconino Sandstone to form a single hydrologic unit that yields from 6 to 74 gpm (gallons per minute) of water per foot of drawdown. An unconformity Heparates the Permian rocks from the overlying Triassic rocks, which comprise the Moenkopi and Chinle Formations and the Wingate Sandstone. The Moenkopi Formation is 35 to 250 feet thick and consists of intercalated brownish-red siltstone, sandstone, and conglomerate. It contains salty water in some areas but is dry in most. The Chinle Formation is 0 to 1,550 feet thick and unconformably overlies the Moenkopi. The Chiule consists of multicolored claystone, mudstone, siltstone, sandstone, and conglomerate. Some of the sandstone units yield small amounts of water, usually of a quality unsuitable for domestic use. The Wingate Sandstone is about 250 feet thick and is present only in the extreme northeastern corner of the area. It consists of intercalated, reddish-brown sandstone and siltstone and does not contain water. The Upper Cretaceous rocks comprise the Dakota Sandstone, from 50 to 115 feet thick; the Mancos Shale, about 150 feet thick; and the Mesaverde Group, as much as 200 feet thick. These rocks consist of yellowish-gray, light-green, and reddish-brown sandstone and carbonaceous siltstone. Some of the sandstone units contain water of suitable quality for domestic use, and wells in these units yield from 10 to 1,000 gpm. Sedimentary rocks of Eocene(?) age are about 800 feet thick and unconformably overlie Cretaceous rocks. They consist of light-brown and medium-red conglomerate, sandstone, and siltstone. These sedimentary rocks contain small amounts of water suitable for domestic use and yield from 10 to 25 gpm in the Springerville area. The Datil Formation of Miocene(?) Tertiary age consists of more than 800 feet of sedimentary rocks, which are composed largely of volcanic fragments. The Datil Formation does not contain water in the one small area where it crops out. The Bidahochi Formation of Pliocene age consists of 0 to 800 feet of white, green, and brown claystone, mudstone, and sandstone. Locally it yields from 10 to 50 gpm of water suitable for domestic use. Quaternary rocks consist of as much as 500 feet of alluvium, sand, gravel, travertine, cinders, and lava. The alluvium along the large drainages contains water that differs in quality from place to place. In most areas where it occurs, the lava

Water Supply Paper↗
USGS1966

Ground-water resources of Sheridan County, Wyoming

Sheridan County is in the north-central part of Wyoming and is an area of about 2,500 square miles. The western part of the county is in the Bighorn Mountains, and the eastern part is in the Powder River structural basin. Principal streams are the Powder and Tongue Rivers, which are part of the Yellowstone River system. The climate is semiarid, and the mean annual precipitation at Sheridan is about 16 inches. Rocks of Precambrian age are exposed in the central part of the Bighorn Mountains, and successively younger rocks are exposed eastward. Rocks of Tertiary age, which are the most widespread, are exposed throughout a large part of the Powder River structural basin. Deposits of Quaternary age underlie the flood plains and terraces along the larger streams, particularly in the western part of the basin. Aquifers of pre-Tertiary age are exposed in the western part of the county, but they dip steeply and are deeply buried just a few miles east of their outcrop. Aquifers that might yield large supplies of water include the Bighorn Dolomite, Madison Limestone, Amsden Formation, and Tensleep Sandstone. The Flathead Sandstone, Sundance Formation, Morrison Formation, Cloverly Formation,. Newcastle Sandstone, Frontier Formation, Parkman Sandstone, Bearpaw Shale, .and Lance Formation may yield small or, under favorable conditions, moderate supplies of water. Few wells tap aquifers of pre-Tertiary age, and these are restricted to the outcrop area. The meager data available indicate that the water from the Lance Formation, Bearpaw Shale, Parkman Sandstone, Tensleep Sandstone and Amsden Formation, and Flathead Standstone is of suitable quality for domestic or stock purposes, and that water from the Tensleep Sandstone and Amsden Formation and the Flathead Sandstone is of good quality for irrigation. Samples could not be obtained from other aquifers of pre-Tertiary age; so the quality of water in these aquifers could not be determined. Adequate supplies of ground water for stock or domestic use can be developed throughout much of the report area from the Fort Union and Wasatch Formations of Tertiary age; larger supplies might be obtained from the coarse-grained sandstone facies of the Wasatch Formation near Moncreiffe Ridge. Four aquifer tests were made at wells tapping formations of Tertiary age, and the coefficients of permeability determined ranged from 2.5 to 7.9 gallons per day per square foot. The depths to which wells must be drilled to penetrate an aquifer differ within relatively short distances because of the lenticularity of the aquifers. Water in aquifers of Tertiary age may occur under water-table, artesian, or a combination of artesian and gas-lift conditions. Water from the Fort Union is usable for domestic purposes, but the iron and dissolved-solids content impair the quality at some localities. Water from the Fort Union Formation is not recommended for irrigation because of sodium and bicarbonate content. The water is regarded as good to fair for stock use. Water from the Wasatch Formation generally contains dissolved solids in excess of the suggested domestic standards, but this water is usable in the absence of other supplies. The development of irrigation supplies from the Wasatch Formation may be possible in some areas, but the water quality should be carefully checked. Water of good to very poor quality for stock supplies is obtained, depending upon the location. Hydrogen sulfide, commonly present in water of the Fort Union and Wasatch Formations, becomes an objectionable characteristic when the water is used for human consumption. Deposits of Quaternary age generally yield small to moderate supplies of water to wells. Two pumping tests were conducted, and the coefficients of permeability of the aquifers tested were 380 and 1,100 gallons per day per square foot. Usable supplies of ground water can be developed from the deposits of Quaternary age, principally along the valleys of perennial strea

Water Supply Paper↗
USGS1968

Geology and ground-water resources of Fillmore County, Nebraska, with a section on chemical quality of the water

Fillmore County, an area 24 miles square, lies in the eastern part of the Nebraska loess plain. Although tributaries of the Big Blue River have eroded valleys into this plain, much of the original surface is intact. Broad flats and numerous shallow undrained depressions characterize the plain. The county is underlain by unconsolidated deposits of Quaternary age to depths ranging from about 80 to 450 feet. The upper part of this depositional sequence consists largely of wind-deposited clayey silt, and the lower part of stream-deposited sand and gravel. In part of the county, deposits of glacial till also are included. The Quaternary deposits mantle an eroded surface of marine-deposited strata of Cretaceous age. The lower deposits of Quaternary age are saturated and constitute a highly productive aquifer throughout much of the county. The saturated zone ranges from about 20 to 350 feet in thickness. Replenishment to this aquifer, derived principally from precipitation, is believed to average about 1.4 inches per year. Because the quantity of ground water pumped per year exceeds the average annual quantity of recharge, some of the water used for irrigation is from storage. Consequently, water levels in wells .are declining. This trend is likely to continue. The ground water is of the calcium bicarbonate type and is hard, but it is chemically suitable for irrigation use on most soils in the county.

Nebraska↗
USGS1990

Numerical simulation of hydrothermal circulation in the Cascade Range, north-central Oregon

Alternate conceptual models to explain near-surface heat-flow observations in the central Oregon Cascade Range involve (1) an extensive mid-crustal magmatic heat source underlying both the Quaternary arc and adjacent older rocks or (2) a narrower deep heat source which is flanked by a relatively shallow conductive heat-flow anomaly caused by regional ground-water flow (the lateral-flow model). Relative to the mid-crustal heat source model, the lateral-flow model suggests a more limited geothermal resource base, but a better-defined exploration target. We simulated ground-water flow and heat transport through two cross sections trending west from the Cascade range crest in order to explore the implications of the two models. The thermal input for the alternate conceptual models was simulated by varying the width and intensity of a basal heat-flow anomaly and, in some cases, by introducing shallower heat sources beneath the Quaternary arc. Near-surface observations in the Breitenbush Hot Springs area are most readily explained in terms of lateral heat transport by regional ground-water flow; however, the deep thermal structure still cannot be uniquely inferred. The sparser thermal data set from the McKenzie River area can be explained either in terms of deep regional ground-water flow or in terms of a conduction-dominated system, with ground-water flow essentially confined to Quaternary rocks and fault zones.

Conference Paper↗
USGS1980

Modern sedimentary facies of the open Pacific coast and Pleistocene analogs from Montery Bay, California

Depositional processes and sedimentary structures of wave-dominated Pacific coastal environments vary systematically with water depth. The depth-limited open-coast facies identifiable by their sedimentary structures are the inner shelf, barred or nonbarred nearshore, beach, and coastal dune facies. These facies are most commonly preserved in shallowing-upward progradational sequences. The vertical sequence of sedimentary structures preserved in marine terrace deposits in the northern Monterey Bay region is very similar to that predicted on the basis of the modern facies. Few marine sediments deposited during the marine transgression that accompanied rising sea level were preserved. Most of the the marine and eolian sediments form a progradational sequence deposited mainly during intervals of falling sea level. In contrast, the sediments that form the adjacent fluvial terraces were deposited mainly during periods of rising sea level and became entrenched during the subsequent lowering of sea level. In combination, these fluvial, marine, and eolian deposits provide a record of a complete eustatic cycle. The recognition of the role of changing sea level in controlling patterns of coastal sedimentation and landform development during the Quaternary allows the development of a generalized model for Quaternary sedimentation along a wave-dominated coastline. The application of this model has aided in the interpretation of older Pleistocene sediments in the region (e.g. the Aromas Sand). It also has resulted in the recognition of at least eleven glacio-eustatic cycles preserved in the stratigraphic record of the Monterey Bay area during the Quaternary.

California↗
USGS2016

Geologic map and cross sections of the Embudo Fault Zone in the Southern Taos Valley, Taos County, New Mexico

The southern Taos Valley encompasses the physiographic and geologic transition zone between the Picuris Mountains and the San Luis Basin of the Rio Grande rift. The Embudo fault zone is the rift transfer structure that has accommodated the kinematic disparities between the San Luis Basin and the Española Basin during Neogene rift extension. The eastern terminus of the transfer zone coincides with the intersection of four major fault zones (Embudo, Sangre de Cristo, Los Cordovas, and Picuris-Pecos), resulting in an area of extreme geologic and hydrogeologic complexities in both the basin-fill deposits and the bedrock. Although sections of the Embudo fault zone are locally exposed in the bedrock of the Picuris Mountains and in the late Cenozoic sedimentary units along the top of the Picuris piedmont, the full proportions of the fault zone have remained elusive due to a pervasive cover of Quaternary surficial deposits. We combined insights derived from the latest geologic mapping of the area with deep borehole data and high-resolution aeromagnetic and gravity models to develop a detailed stratigraphic/structural model of the rift basin in the southern Taos Valley area. The four fault systems in the study area overlap in various ways in time and space. Our geologic model states that the Picuris-Pecos fault system exists in the basement rocks (Picuris formation and older units) of the rift, where it is progressively down dropped and offset to the west by each Embudo fault strand between the Picuris Mountains and the Rio Pueblo de Taos. In this model, the Miranda graben exists in the subsurface as a series of offset basement blocks between the Ponce de Leon neighborhood and the Rio Pueblo de Taos. In the study area, the Embudo faults are pervasive structures between the Picuris Mountains and the Rio Pueblo de Taos, affecting all geologic units that are older than the Quaternary surficial deposits. The Los Cordovas faults are thought to represent the late Tertiary to Quaternary reactivation of the old and deeply buried Picuris-Pecos faults. If so, then the Los Cordovas structures may extend southward under the Picuris piedmont, where they form growth faults as they merge downward into the Picuris-Pecos bedrock faults. The exceptionally high density of cross-cutting faults in the study area has severely disrupted the stratigraphy of the Picuris formation and the Santa Fe Group. The Picuris formation exists at the surface in the Miranda and Rio Grande del Rancho grabens, and locally along the top of the Picuris piedmont. In the subsurface, it deepens rapidly from the mountain front into the rift basin. In a similar manner, the Tesuque and Chamita Formations are shallowly exposed close to the mountain front, but are down dropped into the basin along the Embudo faults. The Ojo Caliente Sandstone Member of the Tesuque Formation appears to be thickest in the northwestern study area, and thins toward the south and the east. In the study area, the Lama formation thins westward and southward. The Servilleta Basalt is generally thickest to the north and northwest, thins under the Picuris piedmont, and terminates along a major, linear, buried strand of the Embudo fault zone, demonstrating that the Servilleta flows were spatially and temporally related to Embudo fault activity.

New Mexico↗
USGS2015

Geologic setting of the proposed Fallon FORGE Site, Nevada: Suitability for EGS research and development

The proposed Fallon FORGE site lies within and adjacent to the Naval Air Station Fallon (NASF) directly southeast of the town of Fallon, Nevada, within the large basin of the Carson Sink in west-central Nevada. The site is located on two parcels that include land owned by the NASF and leased and owned by Ormat Nevada, Inc. The Carson Sink in the vicinity of the Fallon site is covered by Quaternary deposits, including alluvial fan, eolian, and lacustrine sediments. Four wells penetrate the entire Neogene section and bottom in Mesozoic basement. Late Miocene to Quaternary basin-fill sediments are 0.5 to >1 km thick and overlie Oligocene-Miocene volcanic and lesser sedimentary rocks. The volcanic section is 0.5 to 1.0 km thick and dominated by Miocene mafic lavas. The Neogene section rests nonconformably on heterogeneous Mesozoic basement, which consists of Triassic-Jurassic metamorphic rocks intruded by Cretaceous granitic plutons. The structural framework is dominated by a gently west-tilted half graben cut by moderately to steeply dipping N- to NNEstriking normal faults that dip both east and west. Quaternary faults have not been observed within the proposed FORGE site. Fallon was selected for a potential FORGE site due to its extensional tectonic setting, abundance of available data, existing infrastructure, and documented temperatures, permeability, and lithologic composition of potential reservoirs that fall within the ranges specified by DOE for FORGE. Since the early 1970s, more than 45 wells have been drilled for geothermal exploration within the area. Four exploration wells within the FORGE site are available for use in the project. Several additional wells are available for monitoring outside the central FORGE site within the NASF and Ormat lease area, including numerous temperature gradient holes. There is an existing, ten-station micro-seismic earthquake (MEQ) array that has been collecting data since 2001; the MEQ array can be expanded to encompass the entire Fallon project. The well data indicate that a sizeable area (~4.5 km2 ) has adequate temperatures in crystalline basement but lacks sufficient permeability within the proposed FORGE site. There are two possible, competent target formations in Mesozoic basement for stimulation in the FORGE project area: 1) Jurassic felsic metavolcanic rocks/and or metaquartzite; and 2) Cretaceous granitic intrusions. These units make up at least 3 km3 in the project area and have target temperatures of ~175-215o C. The abundant well data and detailed geophysical surveys (e.g., gravity, MT, and seismic reflection) provide significant subsurface control for the site and will permit development of a detailed 3D model. The documented temperatures, low permeability, and basement lithologies, as well as abundant available data facilitate development of a site dedicated to testing and improving new EGS technologies and techniques, thus making Fallon an ideal candidate for FORGE.

GRC Transactions↗
USGS2017

Tectonic Speleogenesis of Devils Hole, Nevada, and Implications for Hydrogeology and the Development of Long, Continuous Paleoenvironmental Records

Devils Hole, in southern Nevada, is a surface collapse into a deep, planar, steeply dipping fault-controlled fissure in Cambrian limestone and dolostone. The collapse intersects the water table about 15 m below land surface and the fissure extends at least 130 m deeper. Below water, most of the fissure is lined with a >30-cm-thick layer of dense maxillary calcite that precipitated continuously from groundwater for >500,000 yr. The thick mammillary calcite coat implies a long history of calcite-supersaturated groundwaters, which, combined with the absence of dissolutional morphologies, suggests that Devils Hole was not formed by karst processes. Devils Hole is located in a region of active extension; its tectonic origin is shown by evidence of spreading of its planar opening along a fault and by the orientation of its opening and others nearby, perpendicular to the northwest-southeast minimum principal stress direction of the region. Most Quaternary tectonic activity in the area, including seismicity and Quaternary faults and fractures, occurs on or parallel to northeast-striking structures. The hydrogeologic implications of this primarily structural origin are that fracture networks and caves opened by extensional tectonism can act as groundwater flowpaths functionally similar to those developed by karst processes and that, during active extension, transmissivity can be maintained despite infilling by mineral precipitation. Such extensional environments can provide conditions favorable for accumulation of deposits preserving long, continuous paleoenvironmental records. The precipitates in Devils Hole store chronologies of flow system water-level fluctuations, hydrochemistry, a half-million-yr proxy paleoclimate record, evidence of Devils Hole's tectonic origin, and probably atmospheric circulation.

Quaternary Research↗
USGS2012

Sea-level history during the Last Interglacial complex on San Nicolas Island, California: implications for glacial isostatic adjustment processes, paleozoogeography and tectonics

San Nicolas Island, California has one of the best records of fossiliferous Quaternary marine terraces in North America, with at least fourteen terraces rising to an elevation of ~270 m above present-day sea level. In our studies of the lowest terraces, we identified platforms at 38-36 m (terrace 2a), 33-28 m (terrace 2b), and 13-8 m (terrace 1). Uranium-series dating of solitary corals from these terraces yields three clusters of ages: ~120 ka on terrace 2a (marine isotope stage [MIS] 5.5), ~120 and ~100 ka on terrace 2b (MIS 5.5 and 5.3), and ~80 ka (MIS 5.1) on terrace 1. We conclude that corals on terrace 2b that date to ~120 ka were reworked from a formerly broader terrace 2a during the ~100 ka sea stand. Fossil faunas differ on the three terraces. Isolated fragments of terrace 2a have a fauna similar to that of modern waters surrounding San Nicolas Island. A mix of extralimital southern and extralimital northern species is found on terrace 2b, and extralimital northern species are on terrace 1. On terrace 2b, with its mixed faunas, extralimital southern species, indicating warmer than present waters, are interpreted to be from the ~120 ka high sea stand, reworked from terrace 2a. The extralimital northern species on terrace 2b, indicating cooler than present waters, are interpreted to be from the ~100 ka sea stand. The abundant extralimital northern species on terrace 1 indicate cooler than present waters at ~80 ka. Using the highest elevations of the ~120 ka platform of terrace 2a, and assuming a paleo-sea level of +6 m based on previous studies, San Nicolas Island has experienced late Quaternary uplift rates of ~0.25-0.27 m/ka. These uplift rates, along with shoreline angle elevations and ages of terrace 2b (~100 ka) and terrace 1 (~80 ka) yield relative (local) paleo-sea level elevations of +2 to +6 m for the ~100 ka sea stand and -11 to -12 m for the ~80 ka sea stand. These estimates are significantly higher than those reported for the ~100 ka and ~80 ka sea stands on New Guinea and Barbados. Numerical models of the glacial isostatic adjustment (GIA) process presented here demonstrate that these differences in the high stands are expected, given the variable geographic distances between the sites and the former Laurentide and Cordilleran ice sheets. Moreover, the numerical results show that the absolute and differential elevations of the observed high stands provide a potentially important constraint on ice volumes during this time interval and on Earth structure.

California↗
USGS2003

Modeling paleoclimates

Paleoclimatic data and climate models play a complimentary role in understanding climate change. This chapter provides an overview of the process of climate-system modeling, presents the taxonomy of the models recently applied in the study of Quaternary climate change and variation, and discusses the development of climate modeling since the 1965 International Union for Quaternary Science (INQUA) volume and its companions are published. Models based on physical principles do have the potential to provide mechanistic explanations of past climatic variations, provided they are known to work, are applied in an appropriately designed experiment, and explicitly account for all of the components of the climate system that are involved in a particular climate change. Climate models can be classified according to the applications to which they are put, which include simulating the temporal evolution and spatial patterns of the climate system and the attendant responses of environmental subsystems. The objective of paleoclimate modeling is to quantify the behavior and variations of the components that describe the climate system.

Developments in Quaternary Sciences↗
USGS2017

Surface slip during large Owens Valley earthquakes

The 1872 Owens Valley earthquake is the third largest known historical earthquake in California. Relatively sparse field data and a complex rupture trace, however, inhibited attempts to fully resolve the slip distribution and reconcile the total moment release. We present a new, comprehensive record of surface slip based on lidar and field investigation, documenting 162 new measurements of laterally and vertically displaced landforms for 1872 and prehistoric Owens Valley earthquakes. Our lidar analysis uses a newly developed analytical tool to measure fault slip based on cross‐correlation of sublinear topographic features and to produce a uniquely shaped probability density function (PDF) for each measurement. Stacking PDFs along strike to form cumulative offset probability distribution plots (COPDs) highlights common values corresponding to single and multiple‐event displacements. Lateral offsets for 1872 vary systematically from ∼1.0 to 6.0 m and average 3.3 ± 1.1 m (2σ). Vertical offsets are predominantly east‐down between ∼0.1 and 2.4 m, with a mean of 0.8 ± 0.5 m. The average lateral‐to‐vertical ratio compiled at specific sites is ∼6:1. Summing displacements across subparallel, overlapping rupture traces implies a maximum of 7–11 m and net average of 4.4 ± 1.5 m, corresponding to a geologic M w ∼7.5 for the 1872 event. We attribute progressively higher‐offset lateral COPD peaks at 7.1 ± 2.0 m, 12.8 ± 1.5 m, and 16.6 ± 1.4 m to three earlier large surface ruptures. Evaluating cumulative displacements in context with previously dated landforms in Owens Valley suggests relatively modest rates of fault slip, averaging between ∼0.6 and 1.6 mm/yr (1σ) over the late Quaternary.

Book↗
USGS2017

Evidence for distributed clockwise rotation of the crust in the northwestern United States from fault geometries and focal mechanisms

Paleomagnetic and GPS data indicate that Washington and Oregon have rotated clockwise for the past 16 Myr. Late Cenozoic and Quaternary fault geometries, seismicity lineaments, and focal mechanisms provide evidence that this rotation is accommodated by north directed thrusting and right-lateral strike-slip faulting in Washington, and SW to W directed normal faulting and right-lateral strike-slip faulting to the east. Several curvilinear NW to NNW trending high-angle strike-slip faults and seismicity lineaments in Washington and NW Oregon define a geologic pole (117.7°W, 47.9°N) of rotation relative to North America. Many faults and focal mechanisms throughout northwestern U.S. and southwestern British Columbia have orientations consistent with this geologic pole as do GPS surface velocities corrected for elastic Cascadia subduction zone coupling. Large Quaternary normal faults radial to the geologic pole, which appear to accommodate crustal rotation via crustal extension, are widespread and can be found along the Lewis and Clark zone in Montana, within the Centennial fault system north of the Snake River Plain in Idaho and Montana, to the west of the Wasatch Front in Utah, and within the northern Basin and Range in Oregon and Nevada. Distributed strike-slip faults are most prominent in western Washington and Oregon and may serve to transfer slip between faults throughout the northwestern U.S.

British Columbia, Oregon, Washington↗
USGS2025

Shifting baselines of coral-reef species composition from the Late Pleistocene to the present in the Florida Keys

The ongoing global-scale reassembly of modern coral reefs is unprecedented compared with the observed stability of most late Quaternary reef assemblages. One notable exception is the marine isotope stage (MIS) 5e ( ca 130–116 thousand years ago [ka]) reefs in the Florida Keys, where the ubiquitous shallow-water coral, Acropora palmata , was near absent. Little is known, however, about reefs that grew during MIS5d–a ( ca 116–74 ka), between MIS5e and the Holocene. It is therefore unclear whether Florida's unique MIS5e coral assemblages represent a geologically brief anomaly or a more persistent departure from the western Atlantic coral-reef archetype. We addressed that question by reconstructing the composition of MIS5d–a reefs within 29 coral-reef cores collected throughout the Florida Keys. We then compared the relative composition of corals during MIS5d–a to existing datasets from MIS5e, Holocene and modern (1996 and 2022) reefs to evaluate how far today's reef assemblages have diverged from geological baselines. We show that although the proportion of reef frameworks built by corals was remarkably consistent ( ca 38%), species composition changed significantly through time. Acropora palmata was rare throughout MIS5, which we hypothesise was due to greater cold-temperature stress in Florida's subtropical reefs compared with the more climatically stable tropics. In contrast, the massive reef-building coral, Orbicella spp., was regionally dominant throughout the late Quaternary, but has become increasingly rare on modern reefs. By 2022, reefs in the Florida Keys were characterised by a truly novel coral assemblage dominated by Porites astreoides and Siderastrea siderea . In many ways, Florida's reefs defy the concept of a natural baseline; instead, their most persistent characteristic since the Late Pleistocene is their uniqueness. Yet, as reefs are increasingly subjected to unprecedented levels of environmental change, the exceptions to what was normal in the past could, paradoxically, provide the best geological analogues for the future.

Florida↗
USGS2020

Sand dunes, modern and ancient, on southern Colorado Plateau tribal lands, southwestern USA

A mantle of both active and stable aeolian sand covers approximately 34,000 km 2 of northern Arizona, western New Mexico and southern Utah on the southern Colorado Plateau. From west to east, these deposits can be subdivided into the Kaibab-Moenkopi dunes, Chinle Valley dunes, and Chaco dunes, all of which include relict, partly stable and mobile aeolian sand. Locally, these deposits have distinct compositional characteristics. An examination of previous studies into disparate aspects of Colorado Plateau dunes, taken in the context of local geology, Quaternary landscape history and geomorphic processes, provides new insights into interpretation of this regional aeolian sedimentary record. Additional new data about the characteristics of the deposits, and an assessment of present-day climatic conditions enhances our ability to interpret the relative influences of ecosystem and geomorphologic processes with climate variability that continue to influence both new dune formation and reactivation of older deposits. Taken as a whole, the data emphasizes the role that local landscape conditions and history play in providing the context for correctly interpreting aeolian activity and depositional environments, and whether sediment supply or climate play a dominant role in sand dune formation. This is particularly true in the Little Colorado River Valley of northeastern Arizona, where Quaternary volcanic activity has significantly influenced the local landscape processes, deposit characteristics, and dune paleohistory.

Book chapter↗
USGS1987

Geochemistry of the rare earth elements in ferromanganese nodules from DOMES Site A, northern equatorial Pacific

The distribution of rare earth elements (REE) in ferromanganese nodules from DOMES Site A has been determined by instrumental neutron activation methods. The concentrations of the REE vary markedly. Low concentrations characterize samples from a depression (the valley), in which Quaternary sediments are thin or absent; high concentrations are found in samples from the surrounding abyssal hills (the highlands) where the Quaternary sediment section is relatively thick. Moreover, the valley nodules are strongly depleted in the light trivalent REE (LREE) and Ce compared with nodules from the highlands, some of the former showing negative Ce anomalies. The REE abundances in the nodules are strongly influenced by the REE abundances in coexisting bottom water. Some controls on the REE chemistry of bottom waters include: a) the more effective removal of the LREE relative to the HREE from seawater because of the greater degree of complexation of the latter elements with seawater ligands, b) the very efficient oxidative scavenging of Ce on particle surfaces in seawater, and c) the strong depletion of both Ce and the LREE in, or a larger benthic flux of the HREE into, the Antarctic Bottom Water (AABW) which flows through the valley. The distinctive REE chemistry of valley nodules is a function of their growth from geochemically evolved AABW. In contrast, the REE chemistry of highland nodules indicates growth from a local, less evolved seawater source.

Geochimica et Cosmochimica Acta↗
USGS1987

The chemistry and mineralogy of haloed burrows in pelagic sediment at DOMES Site A: The equatorial North Pacific

The chemical and mineralogical composition of burrowed sediment, recovered in 66 box cores at latitude 9°25′N and longitude 151°15′W in the equatorial Pacific, demonstrates the important role of infauna in determining the geochemistry of pelagic sediment. Haloed burrows, approximately 3 cm across, were present in many of the cores. Within early Tertiary sediment that was covered by less than 5 cm of surface Quaternary sediment in several cores, the burrows in cross-section consist of three units: (1) a dark yellowish-brown central zone of Quaternary sediment surrounded, by (2) a pale yellowish-orange zone (the halo) of Tertiary sediment, which is surrounded by (3) a metal-oxide precipitate; the enclosing Tertiary sediment is dusky brown. Several elements — Mn, Ni, Cu, Co, Zn, Sb and Ce — have been leached from the light-colored halo, whereas Cr, Cs, Hf, Rb, Sc, Ta, Th, U, the rare earth elements exclusive of Ce, and the major oxides have not been leached. The metal-oxide zone, 1–5 mm thick, contains as much as 16% MnO 2 , as the mineral todorokite. The composition of the todorokite, exclusive of the admixed Tertiary sediment, resembles the composition of the metal deficit of the halo and also the composition of surface ferromanganese nodules that have been interpreted as having a predominantly diagenetic origin. Thus bioturbation contributes not only to the redistribution of metals within pelagic sediment, but also to the accretion of ferromanganese nodules on the sea floor.

Marine Geology↗
USGS1992

Collapse and flow of lowstand shelf-margin deposits: An example from the eastern Tyrrhenian Sea, Italy

The upper slope of the eastern Tyrrhenian Sea margin has a complex morphology shaped by Quaternary tectonism and by sedimentation phases controlled by changing sea levels. Sediment slides of widely varying size and shape are common in Quaternary deposits of the upper slope, particularly where gradients are steep. Our study of a large sediment failure in lowstand prograded coastal deposits west of Cape Licosa indicates that the nature of shelf-margin deposition is an additional important control on failure. The failure zone has a mobilization surface showing in-situ deformation in the sediment above it; an upper failure surface; a head scarp; and a zone of ponded sediment debris downslope from the exposed surface of failure. The basal mobilization surface is roughly parallel to the seafloor and coincident with a major downlap surface. The failed section is less that 20 m thick and local in extent, but deformation on the basal mobilization surface extends outside the immediate area of the failure. Directly downslope of the slide scarp are internally stratified mounds that show no evidence of deformation or movement. Most of the prograded deposit experienced in-situ deformation that evolved into the collapse of part of the sediment pile above the mobilization surface. A portion of the mobilized sediment flowed a few kilometers basinward and accumulated at the base of a slope-parallel ridge. Sediment failure occurred on the Licosa shelf margin following a major pulse of coastal sedimentation along the lowstand shoreline. On many continental margins, sea-level lowering is thought to be an important cause of failure unconsolidated sediment deposited during previous high-stand conditions. The Licosa slide demonstrates that sea-level fall has another, equally important but indirect, role in sediment failure. As sea level falls and reaches its lowstand position, streams are at their peak efficiency and a coarsening-upward clastic coastal wedge is rapidly emplaced at relatively steep gradients on the shelf margin, and these are conditions that inherently favor sediment instability and failure.

Marine Geology↗